[bsp][Phytium] qspi debug (#7914)

bsp/phytium/aarch32/.config

@@ -10,8 +10,7 @@ CONFIG_RT_NAME_MAX=16
 # CONFIG_RT_USING_ARCH_DATA_TYPE is not set
 CONFIG_RT_USING_SMART=y
 # CONFIG_RT_USING_AMP is not set
-CONFIG_RT_USING_SMP=y
-CONFIG_RT_CPUS_NR=2
+# CONFIG_RT_USING_SMP is not set
 CONFIG_RT_ALIGN_SIZE=4
 # CONFIG_RT_THREAD_PRIORITY_8 is not set
 CONFIG_RT_THREAD_PRIORITY_32=y
@@ -24,7 +23,6 @@ CONFIG_RT_HOOK_USING_FUNC_PTR=y
 CONFIG_RT_USING_IDLE_HOOK=y
 CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
 CONFIG_IDLE_THREAD_STACK_SIZE=4096
-CONFIG_SYSTEM_THREAD_STACK_SIZE=4096
 CONFIG_RT_USING_TIMER_SOFT=y
 CONFIG_RT_TIMER_THREAD_PRIO=4
 CONFIG_RT_TIMER_THREAD_STACK_SIZE=4096
@@ -85,10 +83,6 @@ CONFIG_RT_CONSOLEBUF_SIZE=256
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
 CONFIG_RT_VER_NUM=0x50001
 # CONFIG_RT_USING_STDC_ATOMIC is not set
-
-#
-# RT-Thread Architecture
-#
 CONFIG_RT_USING_CACHE=y
 CONFIG_RT_USING_HW_ATOMIC=y
 # CONFIG_ARCH_ARM_BOOTWITH_FLUSH_CACHE is not set
@@ -203,7 +197,7 @@ CONFIG_RT_USING_TTY=y
 # CONFIG_RT_USING_CPUTIME is not set
 # CONFIG_RT_USING_I2C is not set
 # CONFIG_RT_USING_PHY is not set
-# CONFIG_RT_USING_PIN is not set
+CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_ADC is not set
 # CONFIG_RT_USING_DAC is not set
 CONFIG_RT_USING_NULL=y
@@ -224,7 +218,13 @@ CONFIG_RT_MMCSD_STACK_SIZE=4096
 CONFIG_RT_MMCSD_THREAD_PREORITY=22
 CONFIG_RT_MMCSD_MAX_PARTITION=16
 # CONFIG_RT_SDIO_DEBUG is not set
-# CONFIG_RT_USING_SPI is not set
+CONFIG_RT_USING_SPI=y
+# CONFIG_RT_USING_SPI_BITOPS is not set
+CONFIG_RT_USING_QSPI=y
+# CONFIG_RT_USING_SPI_MSD is not set
+# CONFIG_RT_USING_SFUD is not set
+# CONFIG_RT_USING_ENC28J60 is not set
+# CONFIG_RT_USING_SPI_WIFI is not set
 # CONFIG_RT_USING_WDT is not set
 # CONFIG_RT_USING_AUDIO is not set
 # CONFIG_RT_USING_SENSOR is not set
@@ -258,6 +258,7 @@ CONFIG_RT_USING_POSIX_STDIO=y
 CONFIG_RT_USING_POSIX_POLL=y
 CONFIG_RT_USING_POSIX_SELECT=y
 # CONFIG_RT_USING_POSIX_EVENTFD is not set
+# CONFIG_RT_USING_POSIX_EPOLL is not set
 # CONFIG_RT_USING_POSIX_SOCKET is not set
 CONFIG_RT_USING_POSIX_TERMIOS=y
 CONFIG_RT_USING_POSIX_AIO=y
@@ -530,7 +531,6 @@ CONFIG_RT_USING_KTIME=y
 # LVGL: powerful and easy-to-use embedded GUI library
 #
 # CONFIG_PKG_USING_LVGL is not set
-# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
 # CONFIG_PKG_USING_LV_MUSIC_DEMO is not set
 # CONFIG_PKG_USING_GUI_GUIDER_DEMO is not set
 
@@ -1088,6 +1088,7 @@ CONFIG_RT_USING_KTIME=y
 #
 # CONFIG_PKG_USING_ARDUINO_ADAFRUIT_GFX_LIBRARY is not set
 # CONFIG_PKG_USING_ARDUINO_U8G2 is not set
+# CONFIG_PKG_USING_ARDUINO_TFT_ESPI is not set
 # CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ST7735 is not set
 # CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SSD1306 is not set
 # CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ILI9341 is not set
@@ -1160,17 +1161,18 @@ CONFIG_RT_USING_KTIME=y
 CONFIG_BSP_USING_UART=y
 CONFIG_RT_USING_UART1=y
 # CONFIG_RT_USING_UART0 is not set
-# CONFIG_BSP_USING_SPI is not set
+CONFIG_BSP_USING_SPI=y
+# CONFIG_RT_USING_SPIM0 is not set
+# CONFIG_RT_USING_SPIM1 is not set
+CONFIG_RT_USING_SPIM2=y
+# CONFIG_RT_USING_SPIM3 is not set
 # CONFIG_BSP_USING_CAN is not set
-# CONFIG_BSP_USING_GPIO is not set
-# CONFIG_BSP_USING_QSPI is not set
-CONFIG_BSP_USING_ETH=y
-CONFIG_RT_LWIP_PBUF_POOL_BUFSIZE=1700
-CONFIG_BSP_USING_SDIO=y
-CONFIG_BSP_USING_SDCARD_FATFS=y
-# CONFIG_USING_SDIO0 is not set
-CONFIG_USING_SDIO1=y
-# CONFIG_USING_EMMC is not set
+CONFIG_BSP_USING_GPIO=y
+CONFIG_BSP_USING_QSPI=y
+CONFIG_USING_QSPI_CHANNEL0=y
+# CONFIG_USING_QSPI_CHANNEL1 is not set
+# CONFIG_BSP_USING_ETH is not set
+# CONFIG_BSP_USING_SDIO is not set
 
 #
 # Board extended module Drivers
@@ -1199,8 +1201,14 @@ CONFIG_DEFAULT_DEBUG_PRINT_UART1=y
 #
 # Components Configuration
 #
-# CONFIG_USE_SPI is not set
-# CONFIG_USE_QSPI is not set
+CONFIG_USE_SPI=y
+CONFIG_USE_FSPIM=y
+CONFIG_USE_QSPI=y
+
+#
+# Qspi Configuration
+#
+CONFIG_USE_FQSPI=y
 CONFIG_USE_GIC=y
 CONFIG_ENABLE_GICV3=y
 CONFIG_USE_IOPAD=y
@@ -1211,7 +1219,8 @@ CONFIG_USE_SERIAL=y
 # Usart Configuration
 #
 CONFIG_ENABLE_Pl011_UART=y
-# CONFIG_USE_GPIO is not set
+CONFIG_USE_GPIO=y
+CONFIG_ENABLE_FGPIO=y
 CONFIG_USE_ETH=y
 
 #

bsp/phytium/aarch32/rtconfig.h

@@ -8,8 +8,6 @@
 
 #define RT_NAME_MAX 16
 #define RT_USING_SMART
-#define RT_USING_SMP
-#define RT_CPUS_NR 2
 #define RT_ALIGN_SIZE 4
 #define RT_THREAD_PRIORITY_32
 #define RT_THREAD_PRIORITY_MAX 32
@@ -20,7 +18,6 @@
 #define RT_USING_IDLE_HOOK
 #define RT_IDLE_HOOK_LIST_SIZE 4
 #define IDLE_THREAD_STACK_SIZE 4096
-#define SYSTEM_THREAD_STACK_SIZE 4096
 #define RT_USING_TIMER_SOFT
 #define RT_TIMER_THREAD_PRIO 4
 #define RT_TIMER_THREAD_STACK_SIZE 4096
@@ -60,9 +57,6 @@
 #define RT_CONSOLEBUF_SIZE 256
 #define RT_CONSOLE_DEVICE_NAME "uart1"
 #define RT_VER_NUM 0x50001
-
-/* RT-Thread Architecture */
-
 #define RT_USING_CACHE
 #define RT_USING_HW_ATOMIC
 #define RT_USING_CPU_FFS
@@ -141,6 +135,7 @@
 #define RT_SERIAL_USING_DMA
 #define RT_SERIAL_RB_BUFSZ 1024
 #define RT_USING_TTY
+#define RT_USING_PIN
 #define RT_USING_NULL
 #define RT_USING_ZERO
 #define RT_USING_RANDOM
@@ -151,6 +146,8 @@
 #define RT_MMCSD_STACK_SIZE 4096
 #define RT_MMCSD_THREAD_PREORITY 22
 #define RT_MMCSD_MAX_PARTITION 16
+#define RT_USING_SPI
+#define RT_USING_QSPI
 #define RT_USING_DEV_BUS
 
 /* Using USB */
@@ -376,11 +373,11 @@
 
 #define BSP_USING_UART
 #define RT_USING_UART1
-#define BSP_USING_ETH
-#define RT_LWIP_PBUF_POOL_BUFSIZE 1700
-#define BSP_USING_SDIO
-#define BSP_USING_SDCARD_FATFS
-#define USING_SDIO1
+#define BSP_USING_SPI
+#define RT_USING_SPIM2
+#define BSP_USING_GPIO
+#define BSP_USING_QSPI
+#define USING_QSPI_CHANNEL0
 
 /* Board extended module Drivers */
 
@@ -399,6 +396,13 @@
 
 /* Components Configuration */
 
+#define USE_SPI
+#define USE_FSPIM
+#define USE_QSPI
+
+/* Qspi Configuration */
+
+#define USE_FQSPI
 #define USE_GIC
 #define ENABLE_GICV3
 #define USE_IOPAD
@@ -408,6 +412,8 @@
 /* Usart Configuration */
 
 #define ENABLE_Pl011_UART
+#define USE_GPIO
+#define ENABLE_FGPIO
 #define USE_ETH
 
 /* Eth Configuration */

bsp/phytium/libraries/drivers/Kconfig

@@ -57,6 +57,8 @@ menu "On-chip Peripheral Drivers"
         default n
         select RT_USING_QSPI
         select RT_USING_SPI
+        select BSP_USING_SPI
+        select BSP_USING_GPIO
         if BSP_USING_QSPI
             config USING_QSPI_CHANNEL0
                 bool "using qspi channel_0"