mirror of
https://github.com/RT-Thread/rt-thread.git
synced 2026-11-09 20:45:41 +08:00
把龙芯1c的SPI接口改为RTT统一的SPI接口
This commit is contained in:
勤为本 authored and 
Bernard Xiong committed
1 parent
d6f80720b6
commit
1bbe09df94
7 files changed
+389
-204
No files matched your search
File diff suppressed because it is too large.
Load diff
@@ -0,0 +1,55 @@
|
||||
/*
|
||||
* File : drv_spi.h
|
||||
* This file is part of RT-Thread RTOS
|
||||
* COPYRIGHT (C) 2006 - 2012, RT-Thread Development Team
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2017-11-02 勤为本 first version
|
||||
*/
|
||||
|
||||
#ifndef LS1C_DRV_SPI_H
|
||||
#define LS1C_DRV_SPI_H
|
||||
|
||||
|
||||
#include "../libraries/ls1c_spi.h"
|
||||
|
||||
|
||||
struct ls1c_spi
|
||||
{
|
||||
unsigned char SPIx; // LS1C_SPI_0 or LS1C_SPI_1
|
||||
};
|
||||
|
||||
|
||||
struct ls1c_spi_cs
|
||||
{
|
||||
unsigned char cs; // LS1C_SPI_CS_0, LS1C_SPI_CS_1, LS1C_SPI_CS_2 or LS1C_SPI_CS_3
|
||||
};
|
||||
|
||||
|
||||
|
||||
/*
|
||||
* 初始化并注册龙芯1c的spi总线
|
||||
* @SPI SPI总线，比如LS1C_SPI_0， LS1C_SPI_1
|
||||
* @spi_bus_name 总线名字
|
||||
* @ret
|
||||
*/
|
||||
rt_err_t ls1c_spi_bus_register(rt_uint8_t SPI, const char *spi_bus_name);
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
@@ -1,40 +0,0 @@
|
||||
// led接口
|
||||
// 使用低电平点亮led，高电平熄灭led
|
||||
|
||||
|
||||
#include "ls1c_gpio.h"
|
||||
|
||||
|
||||
// 初始化led
|
||||
// @led_gpio led所在gpio引脚
|
||||
void led_init(unsigned int led_gpio)
|
||||
{
|
||||
gpio_init(led_gpio, gpio_mode_output);
|
||||
gpio_set(led_gpio, gpio_level_high); // 指示灯默认熄灭
|
||||
|
||||
return ;
|
||||
}
|
||||
|
||||
|
||||
// 点亮led
|
||||
// @led_gpio led所在gpio引脚
|
||||
void led_on(unsigned int led_gpio)
|
||||
{
|
||||
gpio_set(led_gpio, gpio_level_low);
|
||||
|
||||
return ;
|
||||
}
|
||||
|
||||
|
||||
// 熄灭led
|
||||
// @led_gpio
|
||||
void led_off(unsigned int led_gpio)
|
||||
{
|
||||
gpio_set(led_gpio, gpio_level_high);
|
||||
|
||||
return ;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -1,27 +0,0 @@
|
||||
// led接口
|
||||
// 使用低电平点亮led，高电平熄灭led
|
||||
|
||||
#ifndef __OPENLOONGSON_LED_H
|
||||
#define __OPENLOONGSON_LED_H
|
||||
|
||||
|
||||
// 初始化led
|
||||
// @led_gpio led所在gpio引脚
|
||||
void led_init(unsigned int led_gpio);
|
||||
|
||||
|
||||
// 点亮led
|
||||
// @led_gpio led所在gpio引脚
|
||||
void led_on(unsigned int led_gpio);
|
||||
|
||||
|
||||
// 熄灭led
|
||||
// @led_gpio
|
||||
void led_off(unsigned int led_gpio);
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
File diff suppressed because it is too large.
Load diff
@@ -29,15 +29,10 @@
|
||||
|
||||
|
||||
// SPI模块编号
|
||||
typedef enum
|
||||
{
|
||||
LS1C_SPI_0 = 0,
|
||||
LS1C_SPI_1,
|
||||
}ls1c_spi_t;
|
||||
|
||||
#define LS1C_SPI_0 (0)
|
||||
#define LS1C_SPI_1 (1)
|
||||
|
||||
// 片选
|
||||
#define LS1C_SPI_INVALID_CS (-1)
|
||||
#define LS1C_SPI_CS_0 (0)
|
||||
#define LS1C_SPI_CS_1 (1)
|
||||
#define LS1C_SPI_CS_2 (2)
|
||||
@@ -50,31 +45,80 @@ typedef enum
|
||||
#define SPI_CPHA_0 (0)
|
||||
|
||||
|
||||
// 硬件SPI信息
|
||||
typedef struct
|
||||
{
|
||||
ls1c_spi_t SPIx; // SPI模块编号
|
||||
unsigned long max_speed_hz; // 最大通信速度，单位hz
|
||||
unsigned char cs; // 片选
|
||||
unsigned char cpol; // 时钟极性
|
||||
unsigned char cpha; // 时钟相位
|
||||
}ls1c_spi_info_t;
|
||||
// 寄存器偏移
|
||||
#define LS1C_SPI_SPCR_OFFSET (0) // 控制寄存器
|
||||
#define LS1C_SPI_SPSR_OFFSET (1) // 状态寄存器
|
||||
#define LS1C_SPI_TxFIFO_OFFSET (2) // 发送的数据寄存器，与接收数据寄存器的偏移相同
|
||||
#define LS1C_SPI_RxFIFO_OFFSET (2) // 接收的数据寄存器，与发送数据寄存器的偏移相同
|
||||
#define LS1C_SPI_SPER_OFFSET (3) // 外部寄存器
|
||||
#define LS1C_SPI_SFC_PARAM_OFFSET (4) // 参数控制寄存器
|
||||
#define LS1C_SPI_SFC_SOFTCS_OFFSET (5) // 片选控制寄存器
|
||||
#define LS1C_SPI_SFC_TIMING_OFFSET (6) // 时序控制寄存器
|
||||
|
||||
// 寄存器SPCR中的位域
|
||||
#define LS1C_SPI_SPCR_SPIE_BIT (7)
|
||||
#define LS1C_SPI_SPCR_SPIE_MASK (0x01 << LS1C_SPI_SPCR_SPIE_BIT)
|
||||
#define LS1C_SPI_SPCR_SPE_BIT (6)
|
||||
#define LS1C_SPI_SPCR_SPE_MASK (0x01 << LS1C_SPI_SPCR_SPE_BIT)
|
||||
#define LS1C_SPI_SPCR_CPOL_BIT (3)
|
||||
#define LS1C_SPI_SPCR_CPOL_MASK (0x01 << LS1C_SPI_SPCR_CPOL_BIT)
|
||||
#define LS1C_SPI_SPCR_CPHA_BIT (2)
|
||||
#define LS1C_SPI_SPCR_CPHA_MASK (0x01 << LS1C_SPI_SPCR_CPHA_BIT)
|
||||
#define LS1C_SPI_SPCR_SPR_BIT (0)
|
||||
#define LS1C_SPI_SPCR_SPR_MASK (0x03 << LS1C_SPI_SPCR_SPR_BIT)
|
||||
|
||||
// 寄存器SPSR中的位域
|
||||
#define LS1C_SPI_SPSR_SPIF_BIT (7)
|
||||
#define LS1C_SPI_SPSR_SPIF_MASK (0x01 << LS1C_SPI_SPSR_SPIF_BIT)
|
||||
#define LS1C_SPI_SPSR_WCOL_BIT (6)
|
||||
#define LS1C_SPI_SPSR_WCOL_MASK (0x01 << LS1C_SPI_SPSR_WCOL_BIT)
|
||||
|
||||
// 寄存器SPER中的位域
|
||||
#define LS1C_SPI_SPER_SPRE_BIT (0)
|
||||
#define LS1C_SPI_SPER_SPRE_MASK (0x3 << LS1C_SPI_SPER_SPRE_BIT)
|
||||
|
||||
// 寄存器SFC_SOFTCS的位域
|
||||
#define LS1C_SPI_SFC_SOFTCS_CSN_BIT (4)
|
||||
#define LS1C_SPI_SFC_SOFTCS_CSN_MASK (0x0f << LS1C_SPI_SFC_SOFTCS_CSN_BIT)
|
||||
#define LS1C_SPI_SFC_SOFTCS_CSEN_BIT (0)
|
||||
#define LS1C_SPI_SFC_SOFTCS_CSEN_MASK (0x0f << LS1C_SPI_SFC_SOFTCS_CSEN_BIT)
|
||||
|
||||
// 发送超时的门限值
|
||||
#define LS1C_SPI_TX_TIMEOUT (20000)
|
||||
|
||||
|
||||
|
||||
/*
|
||||
* 初始化指定SPI模块
|
||||
* @spi_info_p SPI模块信息
|
||||
* 获取指定SPI模块的基地址
|
||||
* @SPIx SPI模块的编号
|
||||
*/
|
||||
void spi_init(ls1c_spi_info_t *spi_info_p);
|
||||
inline void *ls1c_spi_get_base(unsigned char SPIx);
|
||||
|
||||
|
||||
/*
|
||||
* 设置时钟
|
||||
* @spi_base 基地址
|
||||
* @max_hz 最大频率，单位hz
|
||||
*/
|
||||
void ls1c_spi_set_clock(void *spi_base, unsigned long max_hz);
|
||||
|
||||
|
||||
/*
|
||||
* 设置通信模式(时钟极性和相位)
|
||||
* @spi_base 基地址
|
||||
* @cpol 时钟极性
|
||||
* @cpha 时钟相位
|
||||
*/
|
||||
void ls1c_spi_set_mode(void *spi_base, unsigned char cpol, unsigned char cpha);
|
||||
|
||||
|
||||
/*
|
||||
* 设置指定片选为指定状态
|
||||
* @spi_info_p SPI模块信息
|
||||
* @spi_base 基地址
|
||||
* @cs 片选
|
||||
* @new_status 片选引脚的新状态，取值为0或1，即高电平或低电平
|
||||
*/
|
||||
void spi_set_cs(ls1c_spi_info_t *spi_info_p, int new_status);
|
||||
void ls1c_spi_set_cs(void *spi_base, unsigned char cs, int new_status);
|
||||
|
||||
|
||||
/*
|
||||
@@ -82,18 +126,20 @@ void spi_set_cs(ls1c_spi_info_t *spi_info_p, int new_status);
|
||||
* 注意，在多任务的系统中，此函数需要互斥。
|
||||
* 即保证在和某个从设备收发某个字节的过程中，不能被切换到其它任务同时与另外的在同一个SPI总线上的从设备通信
|
||||
* 因为龙芯1c的每路SPI上可能接有不同的从设备，通信频率、模式等可能不同
|
||||
* @spi_info_p SPI接口
|
||||
* @spi_base 基地址
|
||||
* @tx_ch 待发送的数据
|
||||
* @ret 收到的数据
|
||||
*/
|
||||
unsigned char spi_txrx_byte(ls1c_spi_info_t *spi_info_p, unsigned char tx_ch);
|
||||
unsigned char ls1c_spi_txrx_byte(void *spi_base, unsigned char tx_ch);
|
||||
|
||||
|
||||
/*
|
||||
* 打印指定SPI模块的所有寄存器的值
|
||||
* @spi_info_p SPI模块信息
|
||||
* @spi_base 基地址
|
||||
*/
|
||||
void spi_print_all_regs_info(ls1c_spi_info_t *spi_info_p);
|
||||
void ls1c_spi_print_all_regs_info(void *spi_base);
|
||||
|
||||
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
@@ -227,6 +227,11 @@
|
||||
#define RTGUI_IMAGE_BMP
|
||||
// </section>
|
||||
|
||||
#define RT_USING_SPI
|
||||
#define RT_USING_SPI0
|
||||
#define RT_USING_SPI1
|
||||
|
||||
|
||||
// </RDTConfigurator>
|
||||
|
||||
#endif
|
||||
Reference in new issue
Block a user