rebuild the Kconfig

bsp/nrf5x/nrf52840/.config

@@ -15,7 +15,7 @@ CONFIG_RT_THREAD_PRIORITY_32=y
 # CONFIG_RT_THREAD_PRIORITY_256 is not set
 CONFIG_RT_THREAD_PRIORITY_MAX=32
 CONFIG_RT_TICK_PER_SECOND=100
-CONFIG_RT_USING_OVERFLOW_CHECK=y
+# CONFIG_RT_USING_OVERFLOW_CHECK is not set
 CONFIG_RT_USING_HOOK=y
 CONFIG_RT_USING_IDLE_HOOK=y
 CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
@@ -29,18 +29,7 @@ CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
 #
 # CONFIG_RT_KSERVICE_USING_STDLIB is not set
 # CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
-CONFIG_RT_DEBUG=y
-# CONFIG_RT_DEBUG_COLOR is not set
-# CONFIG_RT_DEBUG_INIT_CONFIG is not set
-# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
-# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
-# CONFIG_RT_DEBUG_IPC_CONFIG is not set
-# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
-# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
-# CONFIG_RT_DEBUG_MEM_CONFIG is not set
-# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
-# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
-# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
+# CONFIG_RT_DEBUG is not set
 
 #
 # Inter-Thread communication
@@ -48,8 +37,8 @@ CONFIG_RT_DEBUG=y
 CONFIG_RT_USING_SEMAPHORE=y
 CONFIG_RT_USING_MUTEX=y
 CONFIG_RT_USING_EVENT=y
-CONFIG_RT_USING_MAILBOX=y
-CONFIG_RT_USING_MESSAGEQUEUE=y
+# CONFIG_RT_USING_MAILBOX is not set
+# CONFIG_RT_USING_MESSAGEQUEUE is not set
 # CONFIG_RT_USING_SIGNALS is not set
 
 #
@@ -106,7 +95,7 @@ CONFIG_FINSH_CMD_SIZE=80
 # CONFIG_FINSH_USING_AUTH is not set
 CONFIG_FINSH_USING_MSH=y
 CONFIG_FINSH_USING_MSH_DEFAULT=y
-CONFIG_FINSH_USING_MSH_ONLY=y
+# CONFIG_FINSH_USING_MSH_ONLY is not set
 CONFIG_FINSH_ARG_MAX=10
 
 #
@@ -560,27 +549,44 @@ CONFIG_SOC_NRF52840=y
 CONFIG_SOC_NORDIC=y
 CONFIG_BSP_BOARD_PCA_10056=y
 
+#
+# Onboard Peripheral Drivers
+#
+CONFIG_BSP_USING_JLINK_TO_USART=y
+# CONFIG_BSP_USING_QSPI_FLASH is not set
+
 #
 # On-chip Peripheral Drivers
 #
 CONFIG_BSP_USING_GPIO=y
-CONFIG_NRFX_GPIOTE_ENABLED=1
 CONFIG_BSP_USING_UART=y
+CONFIG_NRFX_USING_UART=y
+# CONFIG_NRFX_USING_UARTE is not set
 CONFIG_BSP_USING_UART0=y
 CONFIG_BSP_UART0_RX_PIN=8
 CONFIG_BSP_UART0_TX_PIN=6
+# CONFIG_BSP_USING_SAADC is not set
+# CONFIG_BSP_USING_I2C is not set
+# CONFIG_BSP_USING_SPI is not set
+# CONFIG_BSP_USING_PWM is not set
+# CONFIG_BSP_USING_WDT is not set
+# CONFIG_BSP_USING_ONCHIP_RTC is not set
+# CONFIG_BSP_USING_ON_CHIP_FLASH is not set
 
 #
-# On-chip flash config
+# MCU flash config
 #
 CONFIG_MCU_FLASH_START_ADDRESS=0x00000000
 CONFIG_MCU_FLASH_SIZE_KB=1024
 CONFIG_MCU_SRAM_START_ADDRESS=0x20000000
 CONFIG_MCU_SRAM_SIZE_KB=256
 CONFIG_MCU_FLASH_PAGE_SIZE=0x1000
+CONFIG_BLE_STACK_USING_NULL=y
+# CONFIG_BSP_USING_SOFTDEVICE is not set
+# CONFIG_BSP_USING_NIMBLE is not set
 CONFIG_NRFX_CLOCK_ENABLED=1
 CONFIG_NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY=7
 CONFIG_NRFX_CLOCK_CONFIG_LF_SRC=1
-CONFIG_NRFX_USING_UART=y
 CONFIG_NRFX_UART_ENABLED=1
 CONFIG_NRFX_UART0_ENABLED=1
+CONFIG_NRFX_GPIOTE_ENABLED=1

bsp/nrf5x/nrf52840/rtconfig.h

@@ -11,7 +11,6 @@
 #define RT_THREAD_PRIORITY_32
 #define RT_THREAD_PRIORITY_MAX 32
 #define RT_TICK_PER_SECOND 100
-#define RT_USING_OVERFLOW_CHECK
 #define RT_USING_HOOK
 #define RT_USING_IDLE_HOOK
 #define RT_IDLE_HOOK_LIST_SIZE 4
@@ -22,15 +21,12 @@
 
 /* kservice optimization */
 
-#define RT_DEBUG
 
 /* Inter-Thread communication */
 
 #define RT_USING_SEMAPHORE
 #define RT_USING_MUTEX
 #define RT_USING_EVENT
-#define RT_USING_MAILBOX
-#define RT_USING_MESSAGEQUEUE
 
 /* Memory Management */
 
@@ -69,7 +65,6 @@
 #define FINSH_CMD_SIZE 80
 #define FINSH_USING_MSH
 #define FINSH_USING_MSH_DEFAULT
-#define FINSH_USING_MSH_ONLY
 #define FINSH_ARG_MAX 10
 
 /* Device virtual file system */
@@ -171,27 +166,32 @@
 #define SOC_NORDIC
 #define BSP_BOARD_PCA_10056
 
+/* Onboard Peripheral Drivers */
+
+#define BSP_USING_JLINK_TO_USART
+
 /* On-chip Peripheral Drivers */
 
 #define BSP_USING_GPIO
-#define NRFX_GPIOTE_ENABLED 1
 #define BSP_USING_UART
+#define NRFX_USING_UART
 #define BSP_USING_UART0
 #define BSP_UART0_RX_PIN 8
 #define BSP_UART0_TX_PIN 6
 
-/* On-chip flash config */
+/* MCU flash config */
 
 #define MCU_FLASH_START_ADDRESS 0x00000000
 #define MCU_FLASH_SIZE_KB 1024
 #define MCU_SRAM_START_ADDRESS 0x20000000
 #define MCU_SRAM_SIZE_KB 256
 #define MCU_FLASH_PAGE_SIZE 0x1000
+#define BLE_STACK_USING_NULL
 #define NRFX_CLOCK_ENABLED 1
 #define NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY 7
 #define NRFX_CLOCK_CONFIG_LF_SRC 1
-#define NRFX_USING_UART
 #define NRFX_UART_ENABLED 1
 #define NRFX_UART0_ENABLED 1
+#define NRFX_GPIOTE_ENABLED 1
 
 #endif