Merge pull request #344 from aozima/CME_M7

add CME-M7 support.

bsp/CME_M7/CME_M7.ld

@@ -0,0 +1,78 @@
+/******************************************************************************
+ *
+ * nuc472_flash.ld - Linker configuration file for project.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2014-08-24     aozima       first implementation
+ *
+ *****************************************************************************/
+
+/* Program Entry, set to mark it as "used" and avoid gc */
+MEMORY
+{
+    FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 512K
+    SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
+}
+
+SECTIONS
+{
+    .text :
+    {
+        _text = .;
+        KEEP(*(.isr_vector))
+        *(.text*)
+        *(.rodata*)
+
+        /* section information for finsh shell */
+        . = ALIGN(4);
+        __fsymtab_start = .;
+        KEEP(*(FSymTab))
+        __fsymtab_end = .;
+        . = ALIGN(4);
+        __vsymtab_start = .;
+        KEEP(*(VSymTab))
+        __vsymtab_end = .;
+        . = ALIGN(4);
+
+        /* section information for components init. */
+        . = ALIGN(4);
+        __rt_init_start = .;
+        KEEP(*(SORT(.rti_fn*)))
+        __rt_init_end = .;
+        . = ALIGN(4);
+
+    } > FLASH
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+
+        /* This is used by the startup in order to initialize the .data secion */
+        _sidata = .;
+    } > FLASH
+    __exidx_end = .;
+
+	/* end of all text. */
+    _etext = .;
+	
+    .data : AT(_etext)
+    {
+        _data = .;
+        *(vtable)
+        *(.data*)
+        _edata = .;
+    } > SRAM
+
+    .bss :
+    {
+        _bss = .;
+        *(.bss*)
+        *(COMMON)
+        _ebss = .;
+    } > SRAM
+    __bss_end = .;
+
+}

bsp/CME_M7/CME_M7.sct

@@ -0,0 +1,22 @@
+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+; load 		region 			size_region
+LR_IROM1 	(0)				(1024 * 128)
+{
+	; load address = execution address
+	ER_IROM1 (0) 			(1024 * 128)
+	{
+		*.o (RESET, +First)
+		*(InRoot$$Sections)
+		.ANY (+RO)
+	}
+
+	; RW data
+	RW_IRAM1 0x20000000 (1024 * 48)
+	{
+		.ANY (+RW +ZI)
+	}
+}
+

bsp/CME_M7/CMSIS/CME_M7/cmem7_it.c

@@ -0,0 +1,93 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_it.c
+	*
+	* @brief    CMEM7 system exception file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note      
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+	
+#include "cmem7_it.h"
+
+void NMI_Handler(void)
+{
+	while (1);
+}
+
+void HardFault_Handler(void)
+{
+  if (CoreDebug->DHCSR & 1) { // check C_DEBUGEN == 1-> Debugger Connected
+    __breakpoint (0); // halt program execution here
+  }
+  /* Go to infinite loop when Hard Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+void MemManage_Handler(void)
+{
+  if (CoreDebug->DHCSR & 1) { // check C_DEBUGEN == 1-> Debugger Connected
+    __breakpoint (0); // halt program execution here
+  }
+  /* Go to infinite loop when Memory Manage exception occurs */
+  while (1)
+  {
+  }
+}
+
+void BusFault_Handler(void)
+{
+  if (CoreDebug->DHCSR & 1) { // check C_DEBUGEN == 1-> Debugger Connected
+    __breakpoint (0); // halt program execution here
+  }
+  /* Go to infinite loop when Bus Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+void UsageFault_Handler(void)
+{
+  if (CoreDebug->DHCSR & 1) { // check C_DEBUGEN == 1-> Debugger Connected
+    __breakpoint (0); // halt program execution here
+  }
+  /* Go to infinite loop when Usage Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+void SVC_Handler(void)
+{
+}
+
+void DebugMon_Handler(void)
+{
+}
+
+void PendSV_Handler(void)
+{
+}
+
+void SysTick_Handler(void)
+{
+}
+

bsp/CME_M7/CMSIS/CME_M7/system_cmem7.c

@@ -0,0 +1,39 @@
+/**
+	*****************************************************************************
+	* @file     system_cmem7.c
+	*
+	* @brief    CMEM7 system initial file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note      
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+
+#include "cmem7.h"
+#include "cmem7_includes.h"
+
+void SystemInit (void) {
+	// Generally, we use DLL clock as system clock, not default oscillator
+	GLB_SelectSysClkSource(SYS_CLK_SEL_DLL);
+
+	// change NMI to PAD IRQ
+	GLB_SetNmiIrqNum(PAD_INT_IRQn);	
+	
+	return ;
+}
+

bsp/CME_M7/CMSIS/SConscript

@@ -0,0 +1,31 @@
+Import('RTT_ROOT')
+Import('rtconfig')
+from building import *
+
+# get current directory
+cwd = GetCurrentDir()
+
+# The set of source files associated with this SConscript file.
+src = Split("""
+CME_M7/system_cmem7.c
+""")
+
+# add for startup script 
+if rtconfig.CROSS_TOOL == 'gcc':
+    src += ['Device/Nuvoton/NUC472_442/Source/GCC/startup_NUC472_442.c']
+elif rtconfig.CROSS_TOOL == 'keil':
+    src += ['CME_M7/startup/arm/startup_cmem7.s']
+elif rtconfig.CROSS_TOOL == 'iar':
+    src += ['Device/Nuvoton/NUC472_442/Source/IAR/startup_NUC472_442.S']
+
+path = [cwd + '/CME_M7']
+#ath += [cwd + '/StdDriver/inc']
+
+# if GetDepend(['RT_USING_BSP_CMSIS']):
+    # path += [cwd + '/CMSIS/Include']
+# elif GetDepend(['RT_USING_RTT_CMSIS']):
+    # path += [RTT_ROOT + '/components/CMSIS/Include']
+
+group = DefineGroup('CMSIS', src, depend = [''], CPPPATH = path)
+
+Return('group')

bsp/CME_M7/SConscript

@@ -0,0 +1,12 @@
+from building import *
+
+cwd  = GetCurrentDir()
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+Return('objs')

bsp/CME_M7/SConstruct

@@ -0,0 +1,30 @@
+import os
+import sys
+import rtconfig
+from rtconfig import RTT_ROOT
+
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+from building import *
+
+TARGET = 'rtthread.' + rtconfig.TARGET_EXT
+
+env = Environment(tools = ['mingw'],
+	AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+	CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
+	AR = rtconfig.AR, ARFLAGS = '-rc',
+	LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+
+if rtconfig.PLATFORM == 'iar':
+	env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
+	env.Replace(ARFLAGS = [''])
+	env.Replace(LINKCOM = ['$LINK $SOURCES $LINKFLAGS -o $TARGET --map project.map'])
+
+Export('RTT_ROOT')
+Export('rtconfig')
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT)
+
+# make a building
+DoBuilding(TARGET, objs)

bsp/CME_M7/StdPeriph_Driver/SConscript

@@ -0,0 +1,14 @@
+import rtconfig
+Import('RTT_ROOT')
+from building import *
+
+# get current directory
+cwd = GetCurrentDir()
+
+src = Glob('src/*.c')
+
+path = [cwd + '/inc']
+
+group = DefineGroup('StdPeriph_Driver', src, depend = [''], CPPPATH = path)
+
+Return('group')

bsp/CME_M7/StdPeriph_Driver/inc/cmem7_aes.h

@@ -0,0 +1,52 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_aes.h
+	*
+	* @brief    CMEM7 AES header file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+	
+#ifndef __CMEM7_AES_H
+#define __CMEM7_AES_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "cmem7.h"
+#include "cmem7_conf.h"
+
+/**
+  * @brief  AES decryption
+	* @param[in] src A pointer to data to be decrypted
+	* @param[out] dst A user-allocated buffer to fetch decrypted data
+  * @param[in] len Expected data size to be decrypted, which should
+	*						 be multiply times of 16
+	* @retval BOOL True if succeed, or flase
+	*/
+BOOL AES_Decrypt(const void *src, void *dst, uint32_t len);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CMEM7_AES_H */
+

bsp/CME_M7/StdPeriph_Driver/inc/cmem7_conf.h

@@ -0,0 +1,108 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_conf.h
+	*
+	* @brief    CMEM7 config file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+
+#ifndef __CMEM7_CONF_H
+#define __CMEM7_CONF_H
+
+#define _ADC
+#define _AES
+#define _CAN
+#define _DDR
+#define _DMA
+#define _EFUSE
+#define _ETH
+#define _FLASH
+#define _GPIO
+#define _I2C
+#define _MISC
+#define _RTC
+#define _SPI
+#define _TIM
+#define _UART
+#define _USB
+#define _WDG
+
+#define USE_FULL_ASSERT    1 
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function which reports
+  *         the name of the source file and the source line number of the call
+  *         that failed. If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((unsigned char *)__FILE__, __LINE__))
+
+	static void assert_failed(unsigned char* file, unsigned long line) {
+		while (1) {
+			;
+		}
+	}
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+typedef enum _BOOL {FALSE = 0, TRUE = 1} BOOL;
+
+/**
+  * System clock frequency, unit is Hz.
+  */
+#define SYSTEM_CLOCK_FREQ         200000000
+
+/**
+  * @brief  usecond delay 
+	* @note 	It can't delay in an accurate time
+	* @param[in] usec usecond to be delay
+	* @retval None
+	*/
+static void udelay(unsigned long usec) {
+  unsigned long count = 0;
+  unsigned long utime = SYSTEM_CLOCK_FREQ / 1000000 * usec;
+
+  while(++count < utime) ;
+}
+
+/**
+  * UART definition for print
+	*/
+#define PRINT_UART							UART2
+
+/**
+  * DDR type definition
+  */
+#define DDR_TYPE				3	// 2 for DDR2, 3 for DDR3
+
+#if (DDR_TYPE == 3)
+# define DDR_SIZE				(256 << 20)
+#elif (DDR_TYPE == 2)
+# define DDR_SIZE				(128 << 20)
+#else
+# error
+#endif
+
+#endif /* __CMEM7_CONF_H */
+

bsp/CME_M7/StdPeriph_Driver/inc/cmem7_ddr.h

@@ -0,0 +1,185 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_ddr.h
+	*
+	* @brief    CMEM7 AES header file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+	
+#ifndef __CMEM7_DDR_H
+#define __CMEM7_DDR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "cmem7.h"
+#include "cmem7_conf.h"
+/** @defgroup _MEM_TYPE
+  * @{
+  */
+enum _MEM_TYPE 
+{
+	MEM_DDR2=1,
+	MEM_DDR3		
+} ;	
+/**
+  * @}
+  */
+
+/** @defgroup _BUS_WIDTH
+  * @{
+  */
+enum _BUS_WIDTH
+{
+	BUS_WIDTH_8,
+	BUS_WIDTH_16,
+	BUS_WIDTH_MAX
+};
+/**
+  * @}
+  */
+/** @defgroup _CHIP_TYPE
+  * @{
+  */  
+enum _CHIP_TYPE
+{
+	_32Mbx8,
+	_64Mbx8,
+	_128Mbx8,
+	_256Mbx8,
+	_512Mbx8,
+	_16Mbx16,
+	_32Mbx16,
+	_64Mbx16,
+	_128Mbx16,
+	_256Mbx16,
+	_512Mbx16,
+	CHIP_TYPE_MAX
+};
+/**
+  * @}
+  */
+
+/** @defgroup _CHIP_NUM
+  * @{
+  */  
+enum _CHIP_NUM
+{
+	CHIP_NUM_x1,
+	CHIP_NUM_x2,
+	CHIP_NUM_MAX
+};
+/**
+  * @}
+  */
+  
+/** @defgroup MEM_CHIP_INFO
+  * @{
+  */
+typedef struct {
+	uint8_t mem_type;     /*!< ddr type @ref _MEM_TYPE*/
+	uint8_t Bus_width;	/*!< ddr qs bus width @ref _BUS_WIDTH*/
+	uint8_t Chip_type;	/*!< chip type @ref _CHIP_TYPE*/
+	uint8_t Chip_num;	/*!< chip number @ref _CHIP_NUM*/
+	uint8_t Chip_bank;      /*!< chip bank number*/		
+} MEM_CHIP_INFO;								
+/**
+  * @}
+  */
+
+
+/** @defgroup DDR2MEM
+  * @{
+  */
+typedef struct {
+	uint32_t tCK;       		/*!< Period of clock(ps), not data period */ 
+	uint32_t tCL;						/*!< tCL */
+	uint32_t tRCD;						/*!< tRCD */
+	uint32_t tRP;						/*!< tRP */
+	uint32_t tRC;						/*!< tRC */
+	uint32_t tRAS;						/*!< tRAS */
+	uint32_t tWR;						/*!< tWR */
+	uint32_t tRRD;						/*!< tRRD */
+	uint32_t tWTR;						/*!< tWTR */
+	uint32_t tRTP;						/*!< tRTP */
+	uint32_t tFAW;						/*!< tFAW */
+} DDR2MEM;								/*!< DDR2ʱÐò¶¨Òå */
+/**
+  * @}
+  */
+
+/** @defgroup DDR3MEM
+  * @{
+  */
+typedef struct {
+	uint32_t tCK;       		/*!< Period of clock(ps), not data period */ 
+	uint32_t tCL;						/*!< tCL */
+	uint32_t tWCL;						/*!< tWCL */
+	uint32_t tRCD;						/*!< tRCD */
+	uint32_t tRAS;						/*!< tRAS */
+	uint32_t tRP;						/*!< tRP */
+	uint32_t tRC;						/*!< tRC */
+	uint32_t tRRD;						/*!< tRRD */
+	uint32_t tFAW;						/*!< tFAW */
+	uint32_t tWR;						/*!< tWR */
+	uint32_t tRTP;						/*!< tRTP */
+	uint32_t tZQoper;					/*!< tZQCL */
+	uint32_t tZQCS;						/*!< tZQCS */
+} DDR3MEM;								/*!< DDR3ʱÐò¶¨Òå */
+/**
+  * @}
+  */
+
+/** @defgroup DDR2PREDEF
+  * @{
+  */
+extern const DDR2MEM DDR2PREDEF[];		/*!< Pre-defined DDR2 Timing in library */
+#define DDR2_400C			0			/*!< sg5E: DDR2-400C CL=4, tCK=5000ps */
+
+/**
+  * @}
+  */
+
+/** @defgroup DDR3PREDEF
+  * @{
+  */
+extern const DDR3MEM DDR3PREDEF[];		/*!< Pre-defined DDR3 Timing in library */
+#define DDR3_400		  	0
+#define DDR3_667        1
+
+/**
+  * @}
+  */
+
+/**
+ * @brief DDR Timing Configuration
+   * @param[in] chip information ,A pointer to struct @ref MEM_CHIP_INFO
+   * @param[in] ddr A pointer to struct @ref DDR2MEM or @ref DDR3MEM that specified DDR Timing. Some typital DDR2/3 Timings are defined in arrays @ref DDR2PREDEF and @ref DDR3PREDEF.
+ * @retval void
+   */
+BOOL  DDR_Init(const MEM_CHIP_INFO *chip_info, const void *ddr);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CMEM7_DDR_H */
+

bsp/CME_M7/StdPeriph_Driver/inc/cmem7_dma.h

@@ -0,0 +1,116 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_dma.h
+	*
+	* @brief    CMEM7 DMA header file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+	
+#ifndef __CMEM7_DMA_H
+#define __CMEM7_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "cmem7.h"
+#include "cmem7_conf.h"
+
+/** @defgroup DMA_Int
+  * @{
+  */
+#define DMA_Int_TfrComplete                0x00000001    
+#define DMA_Int_Err                        0x00000002
+#define DMA_Int_All                        0x00000003
+
+#define IS_DMA_INT(INT)        (((INT) != 0) && (((INT) & ~DMA_Int_All) == 0))
+/**
+  * @}
+  */ 
+
+/**
+  * @brief  Descriptor structure
+	*	@note		DMA requires users provides a list of descriptors to operation.
+	*					Meanwhile, memory occupied by descriptors should be in physical
+	*					memory and keep valid during DMA transfer.
+	*/ 
+typedef struct {                      
+	uint32_t srcAddr;                  /*!< source address 														*/		
+	uint32_t dstAddr;                  /*!< destination address 											*/	
+	uint32_t number;                   /*!< block byte number, no more than 2K Bytes 	*/
+	uint32_t nextBlock;                /*!< next block descriptor 										*/
+	uint32_t padding;                  /*!< Nonsense, only used to fill 							*/
+} BLOCK_DESC;
+	
+/**
+  * @brief  DMA initialization
+  * @note   This function should be called at first before any other interfaces.
+	* @param  None
+	* @retval None
+	*/ 
+void DMA_Init(void);
+
+/**
+  * @brief  Enable or disable DMA interrupt. 
+	* @param[in] Int interrupt mask bits, which can be the combination of @ref DMA_Int
+	* @param[in] Enable The bit indicates if specific interrupts are enable or not
+  * @retval None
+	*/ 
+void DMA_EnableInt(uint32_t Int, BOOL enable);
+
+/**
+  * @brief  Check specific interrupts are set or not 
+	* @param[in] Int interrupt mask bits, which can be the combination of @ref DMA_Int
+  * @retval BOOL The bit indicates if specific interrupts are set or not
+	*/
+BOOL DMA_GetIntStatus(uint32_t Int);
+
+/**
+  * @brief  Clear specific interrupts
+	* @param[in] Int interrupt mask bits, which can be the combination of @ref DMA_Int
+  * @retval None
+	*/
+void DMA_ClearInt(uint32_t Int);
+
+/**
+  * @brief  DMA transfer
+	* @note		Make sure that memory occupied by descriptors should be in physical
+	*					memory and keep valid before DMA transfer is finished (Return false by
+	*					calling DMA_IsBusy after DMA transfer started).
+	* @param[in] blockList A pointer to header of list of BLOCK_DESC
+  * @retval BOOL The bit indicates if DMA begins to transfer
+	* @see		DMA_IsBusy
+	*/
+BOOL DMA_Transfer(BLOCK_DESC *blockList);
+
+/**
+  * @brief  DMA is busy or not
+  * @param  None
+	* @retval BOOL The bit indicates if DMA is busy or not
+	*/ 
+BOOL DMA_IsBusy(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CMEM7_DMA_H */
+

bsp/CME_M7/StdPeriph_Driver/inc/cmem7_efuse.h

@@ -0,0 +1,114 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_efuse.h
+	*
+	* @brief    CMEM7 EFUSE header file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+	
+#ifndef __CMEM7_EFUSE_H
+#define __CMEM7_EFUSE_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "cmem7.h"
+#include "cmem7_conf.h"
+
+/** @defgroup EFUSE_TMRF_R
+  * @{
+  */
+#define EFUSE_TMRF_R_3000                0
+#define EFUSE_TMRF_R_1200                1
+#define EFUSE_TMRF_R_750                 2
+
+#define IS_EFUSE_TMRF(R)                 (((R) == EFUSE_TMRF_R_3000) || \
+                                          ((R) == EFUSE_TMRF_R_1200) || \
+                                          ((R) == EFUSE_TMRF_R_750))
+/**
+  * @}
+  */
+
+/**
+  * @brief  EFUSE timing structure
+	*/
+typedef struct
+{
+	uint32_t EFUSE_Tpwph;                  /*!< Nano second                                    */
+  uint32_t EFUSE_Trac;                   /*!< Nano second                                    */
+	uint32_t EFUSE_Trah;                   /*!< Nano second                                    */
+	uint32_t EFUSE_Trpw;                   /*!< Nano second                                    */
+	uint32_t EFUSE_Trc;                    /*!< Nano second                                    */
+	uint32_t EFUSE_Tesr;                   /*!< Nano second                                    */
+	uint32_t EFUSE_Tprs;                   /*!< Nano second                                    */
+	uint32_t EFUSE_Tpi;                    /*!< Nano second                                    */
+	uint32_t EFUSE_Tpp;                    /*!< Nano second                                    */
+	uint32_t EFUSE_Teps;                   /*!< Nano second                                    */
+	uint32_t EFUSE_Tpwps;                  /*!< Nano second                                    */
+} EFUSE_Timing;
+
+/**
+  * @brief  EFUSE initialization structure
+	*/
+typedef struct
+{
+	uint8_t EFUSE_ClockDividor;       		 /*!< EFUSE clock dividor, 2 in n times */
+	uint8_t EFUSE_TMRF;                    /*!< EFUSE reference resistor select, @ref EFUSE_TMRF_R */
+  EFUSE_Timing* timing;                  /*!< Timing configuration, null if default           */
+} EFUSE_InitTypeDef;
+
+/**
+  * @brief  EFUSE key structure
+	*/
+typedef struct
+{
+	uint32_t key0;                         /*!< EFUSE AES key [31:0]                            */
+  uint32_t key1;                         /*!< EFUSE AES key [63:32]                           */
+	uint32_t key2;                         /*!< EFUSE AES key [95:64]                           */
+	uint32_t key3;                         /*!< EFUSE AES key [127:96]                          */
+	uint32_t key4;                         /*!< EFUSE AES key [159:128]                         */
+  uint32_t key5;                         /*!< EFUSE AES key [191:160]                         */
+	uint32_t key6;                         /*!< EFUSE AES key [223:192]                         */
+	uint32_t key7;                         /*!< EFUSE AES key [255:224]                         */
+} EFUSE_AesKey;
+
+/**
+  * @brief  EFUSE initialization
+  * @note   This function should be called at first before any other interfaces.
+	* @param[in] init A pointer to structure EFUSE_InitTypeDef
+  * @retval None
+	*/ 
+void EFUSE_Init(EFUSE_InitTypeDef* init);
+
+/**
+  * @brief  EFUSE initialization
+  * @param[in] key A pointer to EFUSE_AesKey to be compared
+  * @retval BOOL True if equal, or false if different
+	*/ 
+BOOL EFUSE_Compare(EFUSE_AesKey* key);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CMEM7_EFUSE_H */
+

bsp/CME_M7/StdPeriph_Driver/inc/cmem7_gpio.h

@@ -0,0 +1,148 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_gpio.h
+	*
+	* @brief    CMEM7 GPIO header file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+	
+#ifndef __CMEM7_GPIO_H
+#define __CMEM7_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "cmem7.h"
+#include "cmem7_conf.h"
+
+/** @defgroup GPIO_GROUP
+  * @{
+  */
+typedef enum {
+	GPIO_GROUP_GPIO,
+} GPIO_GROUP;
+
+#define IS_GPIO_GROUP(GROUP)  (((GROUP) == GPIO_GROUP_GPIO))
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_PWM_CHANNEL
+  * @{
+  */
+typedef enum {
+	GPIO_PWM_CHANNEL_GPIO_31,
+} GPIO_PWM_CHANNEL;
+        
+#define IS_GPIO_PWM_CHANNEL(CHANNEL)  (((CHANNEL) == GPIO_PWM_CHANNEL_GPIO_31))
+/**
+  * @}
+  */
+	
+/**
+  * @brief  GPIO initialization
+  * @note   This function should be called at first before any other interfaces.
+	* @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP
+	* @param[in] PositiveTrigger Positive edge interrupt trigger if true, or negative edge
+  * @retval None
+	*/ 	
+void GPIO_Init(uint8_t Group, uint32_t PositiveTrigger);
+
+/**
+  * @brief  Enable or disable GPIO output in the specific group. 
+	* @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP
+	* @param[in] Enable each bit indicates if the corresponding GPIO pin 
+	*						in the specific GPIO group is enable or not
+  * @retval None
+	*/ 
+void GPIO_EnableOutput(uint8_t Group, uint32_t Enable);
+
+/**
+  * @brief  Enable or disable GPIO interrupt in the specific group. 
+	* @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP
+	* @param[in] Enable each bit indicates if the corresponding GPIO pin interrupt 
+	*						in the specific GPIO group is enable or not
+  * @retval None
+	*/ 
+void GPIO_EnableInt(uint8_t Group, uint32_t Enable);
+
+/**
+  * @brief  Check specific interrupts are set or not 
+	* @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP
+	* @retval uint32_t each bit indicates if the corresponding GPIO pin interrupt 
+	*					in the specific GPIO group is set or not
+	*/
+uint32_t GPIO_GetIntStatus(uint8_t Group);
+
+/**
+  * @brief  Clear GPIO interrupt in the specific group. 
+	* @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP
+	* @param[in] Clear each bit indicates if the corresponding GPIO pin interrupt 
+	*						in the specific GPIO group is clear or not
+  * @retval None
+	*/ 
+void GPIO_ClearInt(uint8_t Group, uint32_t Clear);
+
+/**
+  * @brief  Get value of each GPIO pin in the specific group
+	* @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP
+	* @retval uint32_t each bit indicates value of the corresponding GPIO pin 
+	*					in the specific GPIO group
+	*/
+uint32_t GPIO_Read(uint8_t Group);
+
+/**
+  * @brief  Set value of each GPIO pin in the specific group
+	* @param[in] Group GPIO group, which is a value of @ref GPIO_GROUP
+	* @param[in] Unmask each bit indicates value of the corresponding GPIO pin 
+	*						 in the specific GPIO group is set or not
+	* @param[in] data each bit indicates value of the corresponding GPIO pin
+	*						 in the specific GPIO group to be set
+  * @retval None
+	*/ 
+void GPIO_Write(uint8_t Group, uint32_t Unmask, uint32_t data);
+
+/**
+  * @brief  Initialize PWM for the specific GPIO pin
+	* @note		It can work before call GPIO_EnableOutput for the specific GPIO pin
+	* @param[in] Channel PWM channel, which is a value of @ref GPIO_PWM_CHANNEL
+	* @param[in] HighLevelNanoSecond Nanosecond which high level lasts 
+	* @param[in] LowLevelNanoSecond Nanosecond which low level lasts 
+  * @retval None
+	* @see		GPIO_EnableOutput
+	*/ 
+void GPIO_InitPwm(uint8_t Channel, uint32_t HighLevelNanoSecond, uint32_t LowLevelNanoSecond);
+
+/**
+  * @brief  Enable or disable GPIO PWM in the specific channel. 
+	*	@param[in] Channel PWM channel, which is a value of @ref GPIO_PWM_CHANNEL
+	* @param[in] Enable The bit indicates if the specific channel is enable or not
+  * @retval None
+	*/ 
+void GPIO_EnablePwm(uint8_t Channel, BOOL Enable);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CMEM7_GPIO_H */
+

bsp/CME_M7/StdPeriph_Driver/inc/cmem7_includes.h

@@ -0,0 +1,110 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_includes.h
+	*
+	* @brief    CMEM7 includes file, easy to use CMEM7 library
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+
+#ifndef __CMEM7_INCLUDES_H
+#define __CMEM7_INCLUDES_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "cmem7_conf.h"
+#include "cmem7_it.h"
+	 
+#ifdef _ADC
+	#include "cmem7_adc.h"
+#endif
+	 
+#ifdef _AES
+	#include "cmem7_aes.h"
+#endif
+	 
+#ifdef _CAN
+	#include "cmem7_can.h"
+#endif
+	 
+#ifdef _DDR
+	#include "cmem7_ddr.h"
+#endif
+	 
+#ifdef _DMA
+	#include "cmem7_dma.h"
+#endif
+	 
+#ifdef _EFUSE
+	#include "cmem7_efuse.h"
+#endif
+	 
+#ifdef _ETH
+	#include "cmem7_eth.h"
+#endif
+	 
+#ifdef _FLASH
+	#include "cmem7_flash.h"
+#endif
+	 
+#ifdef _GPIO
+	#include "cmem7_gpio.h"
+#endif
+	 
+#ifdef _I2C
+	#include "cmem7_i2c.h"
+#endif
+	 
+#ifdef _MISC
+	#include "cmem7_misc.h"
+#endif
+	 
+#ifdef _RTC
+	#include "cmem7_rtc.h"
+#endif
+	 
+#ifdef _SPI
+	#include "cmem7_spi.h"
+#endif
+	 
+#ifdef _TIM
+	#include "cmem7_tim.h"
+#endif
+	 
+#ifdef _UART
+	#include "cmem7_uart.h"
+#endif
+
+#ifdef _USB
+	#include "cmem7_usb.h"
+#endif
+
+#ifdef _WDG
+	#include "cmem7_wdg.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CMEM7_INCLUDES_H */
+

bsp/CME_M7/StdPeriph_Driver/inc/cmem7_retarget.h

@@ -0,0 +1,87 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_retarget.h
+	*
+	* @brief    CMEM7 retarget header file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+
+#ifndef __CMEM7_RETARGET_H
+#define __CMEM7_RETARGET_H
+
+#include <stdio.h>
+#include "cmem7.h"
+#include "cmem7_conf.h"
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+#pragma import(__use_no_semihosting_swi)
+
+struct __FILE { int handle; /* Add whatever you need here */ };
+FILE __stdout;
+FILE __stdin;
+FILE __stderr;
+
+
+int fputc(int c, FILE *f) {
+  uint8_t ch = c;
+	if (c == '\n')  {
+		ch = '\r';
+    while (0 == UART_Write(PRINT_UART, 1, &ch));
+		ch = '\n';
+  }
+	
+	while (0 == UART_Write(PRINT_UART, 1, &ch)) ;
+  return ch;
+}
+
+
+int fgetc(FILE *f) {
+	uint8_t ch;
+	
+	while (0 == UART_Read(PRINT_UART, 1, &ch)) ;
+  return ch;
+}
+
+int ferror(FILE *f) {
+  /* Your implementation of ferror */
+  return EOF;
+}
+
+
+void _ttywrch(int c) {
+  while (0 == UART_Write(PRINT_UART, 1, (uint8_t *)&c));
+}
+
+
+void _sys_exit(int return_code) {
+label:  goto label;  /* endless loop */
+}
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CMEM7_RETARGET_H */

bsp/CME_M7/StdPeriph_Driver/inc/cmem7_rtc.h

@@ -0,0 +1,89 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_rtc.h
+	*
+	* @brief    CMEM7 RTC header file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+	
+#ifndef __CMEM7_RTC_H
+#define __CMEM7_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "cmem7.h"
+#include "cmem7_conf.h"
+
+/** @defgroup RTC_Int
+  * @{
+  */
+#define RTC_Int_Second                     ((uint32_t)0x00000001)
+#define RTC_Int_Microsecond                ((uint32_t)0x00000002)
+#define RTC_Int_All                        ((uint32_t)0x00000003)
+#define IS_RTC_INT(INT)                    (((INT) != 0) && (((INT) & ~RTC_Int_All) == 0))
+/**
+  * @}
+  */
+
+/**
+  * @brief  Enable or disable RTC interrupt. 
+	* @param[in] Int interrupt mask bits, which can be the combination of @ref RTC_Int
+	* @param[in] Enable The bit indicates if specific interrupts are enable or not
+  * @retval None
+	*/ 
+void RTC_EnableInt(uint32_t Int, BOOL Enable);
+
+/**
+  * @brief  Check specific interrupts are set or not 
+	* @param[in] Int interrupt mask bits, which can be the combination of @ref RTC_Int
+  * @retval BOOL The bit indicates if specific interrupts are set or not
+	*/
+BOOL RTC_GetIntStatus(uint32_t Int);
+
+/**
+  * @brief  Clear specific interrupts
+	* @param[in] Int interrupt mask bits, which can be the combination of @ref RTC_Int
+  * @retval None
+	*/
+void RTC_ClearInt(uint32_t Int);
+
+/**
+  * @brief  Get seconds since power up
+	* @param	None
+  * @retval uint32_t Seconds since power up
+	*/
+uint32_t RTC_GetSecond(void);
+
+/**
+  * @brief  Get current micro-seconds
+	* @param	None
+  * @retval uint32_t Current micro-seconds
+	*/
+uint16_t RTC_GetMicroSecond(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CMEM7_RTC_H */
+

bsp/CME_M7/StdPeriph_Driver/inc/cmem7_spi.h

@@ -0,0 +1,167 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_spi.h
+	*
+	* @brief    CMEM7 SPI header file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+	
+#ifndef __CMEM7_SPI_H
+#define __CMEM7_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "cmem7.h"
+#include "cmem7_conf.h"
+
+
+#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI0) || \
+                                   ((PERIPH) == SPI1))
+
+
+/** @defgroup SPI_MODE
+  * @{
+  */
+#define SPI_MODE_CPOL_0_CPHA_0         0   	/*!< CPOL : Idle clock level is low level. 
+																								 CPHA : Capture data at the first edge */
+#define SPI_MODE_CPOL_0_CPHA_1         1		/*!< CPOL : Idle clock level is low level. 
+																								 CPHA : Capture data at the second edge */	
+#define SPI_MODE_CPOL_1_CPHA_0         2		/*!< CPOL : Idle clock level is high level. 
+																								 CPHA : Capture data at the first edge */
+#define SPI_MODE_CPOL_1_CPHA_1         3	 	/*!< CPOL : Idle clock level is high level. 
+																								 CPHA : Capture data at the first edge */    
+#define IS_SPI_MODE(MODE)              (((MODE) == SPI_MODE_CPOL_0_CPHA_0) || \
+                                        ((MODE) == SPI_MODE_CPOL_0_CPHA_1) || \
+                                        ((MODE) == SPI_MODE_CPOL_1_CPHA_0) || \
+																				((MODE) == SPI_MODE_CPOL_1_CPHA_1))
+/**
+  * @}
+  */
+
+/** @defgroup SPI_INT
+  * @{
+  */	
+#define SPI_INT_RX_FIFO_UNDERFLOW      0x00000001    
+#define SPI_INT_RX_FIFO_OVERFLOW       0x00000002
+#define SPI_INT_RX_FIFO_ALMOST_FULL    0x00000004
+#define SPI_INT_TX_FIFO_UNDERFLOW      0x00000008    
+#define SPI_INT_TX_FIFO_OVERFLOW       0x00000010
+#define SPI_INT_TX_FIFO_ALMOST_FULL    0x00000020
+#define SPI_INT_DONE                   0x00000040
+#define SPI_INT_ALL                    0x0000007F
+
+#define IS_SPI_INT(INT)                (((INT) != 0) && (((INT) & ~SPI_INT_ALL) == 0))
+/**
+  * @}
+  */
+
+/**
+  * @brief  SPI initialization structure
+	*/ 
+typedef struct
+{
+  uint8_t SPI_Mode;                 /*!< indicates SPI's CPOL and CPHA, ref as @ref SPI_MODE */
+  BOOL SPI_RxEn;                    /*!< indicates if SPI receiver is enabled or not */
+  uint8_t SPI_BitLength;            /*!< bit length while transmitting and receiving */
+  uint8_t SPI_Gap;                  /*!< cycle number between continuous data frame */ 
+	uint8_t SPI_ClockDividor;         /*!< SPI clock dividor, 1 / ((1 + DIV) * 2) */
+} SPI_InitTypeDef;
+/**
+  * @}
+  */
+
+/**
+  * @brief  SPI initialization
+  * @note   This function should be called at first before any other interfaces.
+	* @param[in] SPIx SPI peripheral, which is SPI0 or SPI1
+	* @param[in] init A pointer to structure SPI_InitTypeDef
+  * @retval None
+	*/ 
+void SPI_Init(SPI0_Type* SPIx, SPI_InitTypeDef *init);
+
+/**
+  * @brief  Enable or disable SPI. 
+	* @param[in] SPIx SPI peripheral, which is SPI0 or SPI1
+	* @param[in] Enable The bit indicates if the specific SPI is enable or not
+  * @retval None
+	*/ 
+void SPI_Enable(SPI0_Type* SPIx, BOOL enable);
+
+/**
+  * @brief  Enable or disable SPI interrupt. 
+	* @param[in] SPIx SPI peripheral, which is SPI0 or SPI1
+	* @param[in] Int interrupt mask bits, which can be the combination of @ref SPI_Int
+	* @param[in] Enable The bit indicates if specific interrupts are enable or not
+  * @retval None
+	*/ 
+void SPI_EnableInt(SPI0_Type* SPIx, uint32_t Int, BOOL enable);
+
+/**
+  * @brief  Check specific interrupts are set or not 
+	* @param[in] SPIx SPI peripheral, which is SPI0 or SPI1
+	* @param[in] Int interrupt mask bits, which can be the combination of @ref SPI_Int
+  * @retval BOOL The bit indicates if specific interrupts are set or not
+	*/
+BOOL SPI_GetIntStatus(SPI0_Type* SPIx, uint32_t Int);
+
+/**
+  * @brief  Clear specific interrupts
+	* @param[in] SPIx SPI peripheral, which is SPI0 or SPI1
+	* @param[in] Int interrupt mask bits, which can be the combination of @ref SPI_Int
+  * @retval None
+	*/
+void SPI_ClearInt(SPI0_Type* SPIx, uint32_t Int);
+
+/**
+  * @brief  Read data from SPI FIFO
+	* @param[in] SPIx SPI peripheral, which is SPI0 or SPI1
+	* @param[in] size Expected data size to be read
+	* @param[out] data A user-allocated buffer to fetch data to be read
+  * @retval uint8_t Actual read data size
+	*/
+uint8_t SPI_ReadFifo(SPI0_Type* SPIx, uint8_t size, uint32_t* data);
+
+/**
+  * @brief  Write data to SPI FIFO
+	* @param[in] SPIx SPI peripheral, which is SPI0 or SPI1
+	* @param[in] size Expected data size to be written
+	* @param[in] data A pointer to the data to be written
+  * @retval uint8_t Actual written data size
+	*/
+uint8_t SPI_WriteFifo(SPI0_Type* SPIx, uint8_t Size, uint32_t* data);
+
+/**
+  * @brief  send a SPI transcation request 
+	* @param[in] SPIx SPI peripheral, which is SPI0 or SPI1
+	* @param[in] size Expected data size to be written and read
+	* @retval BOOL The bit indicates if the request is sent
+	*/
+BOOL SPI_Transcation(SPI0_Type* SPIx, uint8_t size);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__CMEM7_SPI_H */
+

bsp/CME_M7/StdPeriph_Driver/inc/cmem7_tim.h

@@ -0,0 +1,101 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_tim.h
+	*
+	* @brief    CMEM7 timer header file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+	
+#ifndef __CMEM7_TIM_H
+#define __CMEM7_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "cmem7.h"
+#include "cmem7_conf.h"
+
+
+#define IS_TIM_ALL_PERIPH(PERIPH) (((PERIPH) == TIMER0) || \
+                                   ((PERIPH) == TIMER1) || \
+                                   ((PERIPH) == TIMER2) || \
+                                   ((PERIPH) == TIMER3))
+																	 
+/**
+  * @brief  Timer initialization
+  * @note   This function should be called at first before any other interfaces.
+	* @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3
+	* @param[in] Ms overflow micro-seconds of the specific timer
+  * @retval None
+	*/
+void TIM_Init(TIMER0_Type* Timx, uint16_t Ms);
+
+/**
+  * @brief  Enable or disable timer interrupt. 
+	* @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3
+	* @param[in] Enable The bit indicates if the specific interrupt is enable or not
+  * @retval None
+	*/ 
+void TIM_EnableInt(TIMER0_Type* Timx, BOOL Enable);
+
+/**
+  * @brief  Check the specific interrupt is set or not 
+	* @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3
+	* @retval BOOL The bit indicates if the specific interrupt is set or not
+	*/
+BOOL TIM_GetIntStatus(TIMER0_Type* Timx);
+
+/**
+  * @brief  Clear specific interrupts
+	* @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3
+	* @retval None
+	*/
+void TIM_ClearInt(TIMER0_Type* Timx);
+
+/**
+  * @brief  Enable or disable timer. 
+	* @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3
+	* @param[in] Enable The bit indicates if the specific timer is enable or not
+  * @retval None
+	*/ 
+void TIM_Enable(TIMER0_Type* Timx, BOOL Enable);
+
+/**
+  * @brief  Check the specific timer is overflow or not 
+	* @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3
+	* @retval BOOL The bit indicates if the specific timer is overflow or not
+	*/
+BOOL TIM_IsOverflow(TIMER0_Type* Timx);
+
+/**
+  * @brief  Get current counter of timer
+	* @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3
+	* @retval uint32_t current counter
+	*/
+uint32_t TIM_GetCounter(TIMER0_Type* Timx);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__CMEM7_TIM_H */
+

bsp/CME_M7/StdPeriph_Driver/inc/cmem7_uart.h

@@ -0,0 +1,172 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_uart.h
+	*
+	* @brief    CMEM7 uart header file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+
+#ifndef __CMEM7_UART_H
+#define __CMEM7_UART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "cmem7.h"
+#include "cmem7_conf.h"
+
+#define IS_UART_ALL_PERIPH(PERIPH) (((PERIPH) == UART0) || \
+                                     ((PERIPH) == UART1) || \
+                                     ((PERIPH) == UART2))
+	
+/** @defgroup UART_StopBits
+  * @{
+  */
+#define UART_StopBits_0_5                 0
+#define UART_StopBits_1                   1
+#define UART_StopBits_1_5                 2
+#define UART_StopBits_2                   3
+#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_StopBits_1) || \
+                                     ((STOPBITS) == UART_StopBits_0_5) || \
+                                     ((STOPBITS) == UART_StopBits_2) || \
+                                     ((STOPBITS) == UART_StopBits_1_5))
+/**
+  * @}
+  */
+
+/** @defgroup UART_Parity
+  * @{
+  */
+#define UART_Parity_Even                  0
+#define UART_Parity_Odd                   1
+#define UART_Parity_None                  2
+#define IS_UART_PARITY(PARITY) (((PARITY) == UART_Parity_Even) || \
+                                 ((PARITY) == UART_Parity_Odd) || \
+																 ((PARITY) == UART_Parity_None))										 
+/**
+  * @}
+  */
+
+/** @defgroup UART_Int
+  * @{
+  */
+#define UART_Int_RxNotEmpty               0x00000001    
+#define UART_Int_TxEmpty                  0x00000002
+#define UART_Int_TxHalfEmpty              0x00000004
+#define UART_Int_TxTimeoutNotEmpty        0x00000008
+#define UART_Int_TxTimeoutEmpty           0x00000010
+#define UART_Int_RxHalfFull               0x00000020
+#define UART_Int_TxFull                   0x00000040
+#define UART_Int_ParityError              0x00000080
+#define UART_Int_FrameError               0x00000100
+#define UART_Int_OverrunError             0x00000200
+#define UART_Int_RxThresholdReach         0x00000400
+#define UART_Int_All                      0x000007FF
+
+#define IS_UART_INT(INT)        (((INT) != 0) && (((INT) & ~UART_Int_All) == 0))
+
+/**
+  * @}
+  */
+	
+/**
+  * @brief  UART initialization structure
+	*/ 
+typedef struct
+{
+	uint32_t UART_BaudRate;            /*!< Baudrate */																	  
+	uint8_t UART_StopBits;             /*!< Specifies the number of stop bits transmitted, 
+																					It's a value of @ref UART_StopBits */
+	uint8_t UART_Parity;               /*!< Specifies the parity mode. 
+																					It's a value of @ref UART_Parity */
+	BOOL UART_LoopBack;                /*!< loop back mode */
+	BOOL UART_RxEn;                    /*!< Receive enable bit */
+	BOOL UART_CtsEn;                   /*!< Clear to set */
+} UART_InitTypeDef;
+
+/**
+  * @brief  UART initialization
+  * @note   This function should be called at first before any other interfaces.
+	* @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2
+	* @param[in] init A pointer to structure UART_InitTypeDef
+  * @retval None
+	*/ 
+void UART_Init(UART0_Type* UARTx, UART_InitTypeDef *init);
+
+/**
+  * @brief  Enable or disable UART interrupt. 
+	* @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2
+	* @param[in] Int interrupt mask bits, which can be the combination of @ref UART_Int
+	* @param[in] Enable The bit indicates if specific interrupts are enable or not
+  * @retval None
+	*/ 
+void UART_EnableInt(UART0_Type* UARTx, uint32_t Int, BOOL Enable);
+
+/**
+  * @brief  Enable or disable UART. 
+	* @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2
+	* @param[in] Enable The bit indicates if the specific UART is enable or not
+  * @retval None
+	*/ 
+void UART_Enable(UART0_Type* UARTx, BOOL enable);
+
+/**
+  * @brief  Check specific interrupts are set or not 
+	* @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2
+	* @param[in] Int interrupt mask bits, which can be the combination of @ref UART_Int
+  * @retval BOOL The bit indicates if specific interrupts are set or not
+	*/
+BOOL UART_GetIntStatus(UART0_Type* UARTx, uint32_t Int);
+
+/**
+  * @brief  Clear specific interrupts
+	* @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2
+	* @param[in] Int interrupt mask bits, which can be the combination of @ref UART_Int
+  * @retval None
+	*/
+void UART_ClearInt(UART0_Type* UARTx, uint32_t Int);
+
+/**
+  * @brief  Write data to UART
+	* @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2
+	* @param[in] Size Expected data size to be written
+	* @param[in] Data A pointer to the data to be written
+  * @retval uint8_t Actual written data size
+	*/
+uint8_t UART_Write(UART0_Type* UARTx, uint8_t Size, uint8_t* Data);
+
+/**
+  * @brief  Read data from UART
+	* @param[in] UARTx UART peripheral, which is UART0, UART1 or UART2
+	* @param[in] Size Expected data size to be read
+	* @param[out] Data A user-allocated buffer to fetch data to be read
+  * @retval uint8_t Actual read data size
+	*/
+uint8_t UART_Read(UART0_Type* UARTx, uint8_t Size, uint8_t* Data);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CMEM7_UART_H */
+

bsp/CME_M7/StdPeriph_Driver/inc/cmem7_wdg.h

@@ -0,0 +1,103 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_wdg.h
+	*
+	* @brief    CMEM7 watchdog header file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+	
+#ifndef __CMEM7_WDG_H
+#define __CMEM7_WDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "cmem7.h"
+#include "cmem7_conf.h"
+
+/** @defgroup WDG_INT
+  * @{
+  */
+#define WDG_INT_QUARTER                 0
+#define WDG_INT_HALF                    1
+#define IS_WDG_INT(INT)                 (((INT) == WDG_INT_QUARTER) || \
+                                         ((INT) == WDG_INT_HALF))
+/**
+  * @}
+  */
+
+/** @defgroup WDG_TRIGGER_MODE
+  * @{
+  */
+#define WDG_TRIGGER_MODE_EDGE           0
+#define WDG_TRIGGER_MODE_LEVEL          1
+#define IS_WDG_TRIGGER_MODE(TRI)        (((TRI) == WDG_TRIGGER_MODE_EDGE) || \
+                                         ((TRI) == WDG_TRIGGER_MODE_LEVEL))
+/**
+  * @}
+  */
+
+/**
+  * @brief  Watchdog initialization
+  * @note   This function should be called at first before any other interfaces.
+	* @param[in] trigger Watchdog interrupt trigger mode, which is a value of @ref WDG_TRIGGER_MODE
+	* @param[in] ResetMicroSecond MicroSeconds lasts before global reset
+  * @retval None
+	*/ 
+void WDG_Init(uint8_t trigger, uint16_t ResetMicroSecond);
+
+/**
+  * @brief  Enable or disable watchdog interrupt. 
+	* @param[in] Int interrupt mask bits, which is a value of @ref WDG_INT
+	* @param[in] Enable The bit indicates if the specific interrupt are enable or not
+  * @retval None
+	*/ 
+void WDG_EnableInt(uint8_t Int, BOOL Enable);
+
+/**
+  * @brief  Check the specific interrupt are set or not 
+	* @param	None
+  * @retval BOOL The bit indicates if the specific interrupt are set or not
+	*/
+BOOL WDG_GetIntStatus(void);
+
+/**
+  * @brief  Clear the specific interrupt
+	* @param	None
+  * @retval None
+	*/
+void WDG_ClearInt(void);
+
+/**
+  * @brief  Enable or disable watchdog. 
+	* @param[in] Enable The bit indicates if watchdog is enable or not
+  * @retval None
+	*/ 
+void WDG_Enable(BOOL Enable);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CMEM7_WDG_H */
+

bsp/CME_M7/StdPeriph_Driver/inc/system_cmem7.h

@@ -0,0 +1,47 @@
+/**
+	*****************************************************************************
+	* @file     system_cmem7.h
+	*
+	* @brief    CMEM7 system initial header file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note      
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+
+#ifndef __SYSTEM_CMEM7_H
+#define __SYSTEM_CMEM7_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/**
+  * @brief  Setup the microcontroller system.
+  * @note   This function should be used only after reset.
+	* @param  None
+  * @retval None
+	*/  
+void SystemInit(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_CMEM7_H */
+

bsp/CME_M7/StdPeriph_Driver/src/cmem7_aes.c

@@ -0,0 +1,53 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_aes.c
+	*
+	* @brief    CMEM7 AES source file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+	
+#include "cmem7_aes.h"
+
+BOOL AES_Decrypt(const void *src, void *dst, uint32_t len)
+{
+	uint32_t *po = dst;
+	const uint32_t *pi = src;
+
+	if (len & 0xF)
+		return FALSE;
+
+	AES->FIFO_CLEAR = 1;
+	AES->FIFO_CLEAR = 0;
+	GLOBAL_CTRL->AES_BURST_TYPE = 0x1;						// Cannot be 0
+	while (len > 0) {
+		while (0 == GLOBAL_CTRL->AES_STATUS_b.IDLE);		// 0x41007010
+		udelay(2);
+		GLOBAL_CTRL->AES_TARGET_ADDR = (uint32_t)po;		// 0x41800000;
+		po += 4;
+		len -= 4 * sizeof(uint32_t);
+		while (0 == GLOBAL_CTRL->AES_STATUS_b.RD_EMPTY);	// 0x41007010
+		AES->FIFO = *pi++;
+		AES->FIFO = *pi++;
+		AES->FIFO = *pi++;
+		AES->FIFO = *pi++;
+	}
+	return TRUE;
+}

bsp/CME_M7/StdPeriph_Driver/src/cmem7_gpio.c

@@ -0,0 +1,181 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_gpio.c
+	*
+	* @brief    CMEM7 GPIO source file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+	
+#include "cmem7_gpio.h"
+
+#define GPIO_GROUP_GPIO_H 					(GPIO_GROUP_GPIO + 1)
+#define GPIO_GROUP_GPIO_N 					(GPIO_GROUP_GPIO + 2)
+
+#define IS_INNER_GPIO_GROUP(GROUP)  (((GROUP) == GPIO_GROUP_GPIO) || \
+																			((GROUP) == GPIO_GROUP_GPIO_H) || \
+																			((GROUP) == GPIO_GROUP_GPIO_N))
+
+#define GPIO_PWM_CHANNEL_GPIO_H_9 	(GPIO_PWM_CHANNEL_GPIO_31 + 1)
+#define GPIO_PWM_CHANNEL_GPIO_H_19 	(GPIO_PWM_CHANNEL_GPIO_31 + 2)
+#define GPIO_PWM_CHANNEL_GPIO_H_20 	(GPIO_PWM_CHANNEL_GPIO_31 + 3)
+        
+#define IS_INNER_GPIO_PWM_CHANNEL(CHANNEL)  (((CHANNEL) == GPIO_PWM_CHANNEL_GPIO_31) || \
+                                       ((CHANNEL) == GPIO_PWM_CHANNEL_GPIO_H_9) || \
+                                       ((CHANNEL) == GPIO_PWM_CHANNEL_GPIO_H_19) || \
+                                       ((CHANNEL) == GPIO_PWM_CHANNEL_GPIO_H_20))
+static uint32_t gpio_GetClock() {
+	return SYSTEM_CLOCK_FREQ / (1 << (GLOBAL_CTRL->CLK_SEL_0_b.GPIO_CLK + 1));
+}
+
+void GPIO_Init(uint8_t Group, uint32_t PositiveTrigger) {
+	assert_param(IS_GPIO_GROUP(Group));
+	
+	if (Group == GPIO_GROUP_GPIO) {
+	  GPIO->GPIO_POSITIVE_EDGE_INT_TRIGGER = PositiveTrigger;
+	} else if (Group == GPIO_GROUP_GPIO_H) {
+		GPIO->GPIO_H_POSITIVE_EDGE_INT_TRIGGER = PositiveTrigger;
+	} else {
+		GPIO->GPIO_N_POSITIVE_EDGE_INT_TRIGGER = PositiveTrigger;
+	}
+}
+
+void GPIO_EnableOutput(uint8_t Group, uint32_t Enable) {
+	assert_param(IS_GPIO_GROUP(Group));
+	
+	if (Group == GPIO_GROUP_GPIO) {
+	  GPIO->GPIO_OE = Enable;
+	} else if (Group == GPIO_GROUP_GPIO_H) {
+		GPIO->GPIO_H_OE = Enable;
+	} else {
+		GPIO->GPIO_N_OE = Enable;
+	}
+}
+
+void GPIO_EnableInt(uint8_t Group, uint32_t Enable) {
+	assert_param(IS_GPIO_GROUP(Group));
+	
+	if (Group == GPIO_GROUP_GPIO) {
+	  GPIO->GPIO_INT_MASK = ~Enable;
+	} else if (Group == GPIO_GROUP_GPIO_H) {
+		GPIO->GPIO_H_INT_MASK = ~Enable;
+	} else {
+		GPIO->GPIO_N_INT_MASK = ~Enable;
+	}
+}
+
+uint32_t GPIO_GetIntStatus(uint8_t Group) {
+	assert_param(IS_GPIO_GROUP(Group));
+	
+	if (Group == GPIO_GROUP_GPIO) {
+	  return GPIO->GPIO_INT_STATUS;
+	} else if (Group == GPIO_GROUP_GPIO_H) {
+		return GPIO->GPIO_H_INT_STATUS;
+	} 
+	
+	return GPIO->GPIO_N_INT_STATUS;
+}
+
+void GPIO_ClearInt(uint8_t Group, uint32_t Clear) {
+	assert_param(IS_GPIO_GROUP(Group));
+	
+	if (Group == GPIO_GROUP_GPIO) {
+	  GPIO->GPIO_INT_STATUS = Clear;
+	} else if (Group == GPIO_GROUP_GPIO_H) {
+		GPIO->GPIO_H_INT_STATUS = Clear;
+	} else {
+		GPIO->GPIO_N_INT_STATUS = Clear;
+	}
+}
+
+uint32_t GPIO_Read(uint8_t Group) {
+  uint32_t data;
+	
+	assert_param(IS_GPIO_GROUP(Group));
+	
+	if (Group == GPIO_GROUP_GPIO) {
+	  data = GPIO->GPIO_IN;
+	} else if (Group == GPIO_GROUP_GPIO_H) {
+		data = GPIO->GPIO_H_IN;
+	} else {
+		data = GPIO->GPIO_N_IN;
+	}
+	
+	return data;
+}
+
+void GPIO_Write(uint8_t Group, uint32_t Unmask, uint32_t data) {
+	assert_param(IS_GPIO_GROUP(Group));
+	
+	if (Group == GPIO_GROUP_GPIO) {
+		GPIO->GPIO_OUT_UNMASK = Unmask;
+	  GPIO->GPIO_OUT_DATA = data;
+	} else if (Group == GPIO_GROUP_GPIO_H) {
+		GPIO->GPIO_H_OUT_UNMASK = Unmask;
+	  GPIO->GPIO_H_OUT_DATA = data;
+	} else {
+		GPIO->GPIO_N_OUT_UNMASK = Unmask;
+	  GPIO->GPIO_N_OUT_DATA = data;
+	}
+}
+
+void GPIO_InitPwm(uint8_t Channel, uint32_t HighLevelNanoSecond, uint32_t LowLevelNanoSecond) {
+	uint16_t lowTick, highTick;
+	
+	assert_param(IS_GPIO_PWM_CHANNEL(Channel));
+	
+	lowTick = LowLevelNanoSecond * (gpio_GetClock() / 1000000) / 1000;
+	highTick = HighLevelNanoSecond * (gpio_GetClock() / 1000000) / 1000;
+	lowTick = (lowTick < 1) ? lowTick : lowTick - 1;
+	highTick = (highTick < 1) ? highTick : highTick - 1;
+	
+	if (Channel == GPIO_PWM_CHANNEL_GPIO_31) {
+		GPIO->PWM_OUT0_LEN_b.LOW_LEVEL_TICK = lowTick; 
+		GPIO->PWM_OUT0_LEN_b.HIGH_LEVEL_TICK = highTick; 
+	} else if (Channel == GPIO_PWM_CHANNEL_GPIO_H_9) {
+		GPIO->PWM_OUT1_LEN_b.LOW_LEVEL_TICK = lowTick; 
+		GPIO->PWM_OUT1_LEN_b.HIGH_LEVEL_TICK = highTick; 
+	} else if (Channel == GPIO_PWM_CHANNEL_GPIO_H_19) {
+		GPIO->PWM_OUT2_LEN_b.LOW_LEVEL_TICK = lowTick; 
+		GPIO->PWM_OUT2_LEN_b.HIGH_LEVEL_TICK = highTick; 
+  } else {
+		GPIO->PWM_OUT3_LEN_b.LOW_LEVEL_TICK = lowTick; 
+		GPIO->PWM_OUT3_LEN_b.HIGH_LEVEL_TICK = highTick; 
+	}
+}
+
+void GPIO_EnablePwm(uint8_t Channel, BOOL Enable) {
+	assert_param(IS_GPIO_PWM_CHANNEL(Channel));
+	
+	if (Channel == GPIO_PWM_CHANNEL_GPIO_31) {
+		GPIO->PWM_OUT_EN_b.GPIO_31 = Enable; 
+		GPIO->PWM_OUT_SEL_b.GPIO_31 = Enable; 
+	} else if (Channel == GPIO_PWM_CHANNEL_GPIO_H_9) {
+		GPIO->PWM_OUT_EN_b.GPIO_H_9 = Enable; 
+		GPIO->PWM_OUT_SEL_b.GPIO_H_9 = Enable;
+	} else if (Channel == GPIO_PWM_CHANNEL_GPIO_H_19) {
+		GPIO->PWM_OUT_EN_b.GPIO_H_19 = Enable;
+	GPIO->PWM_OUT_SEL_b.GPIO_H_19 = Enable;		
+  } else {
+		GPIO->PWM_OUT_EN_b.GPIO_H_20 = Enable; 
+		GPIO->PWM_OUT_SEL_b.GPIO_H_20 = Enable;
+	}
+}
+

bsp/CME_M7/StdPeriph_Driver/src/cmem7_misc.c

@@ -0,0 +1,139 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_misc.c
+	*
+	* @brief    CMEM7 miscellaneous file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+
+#include "cmem7_misc.h"
+
+#define AIRCR_VECTKEY_MASK    ((uint32_t)0x05FA0000)
+
+void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup));
+  
+  /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */
+  SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup;
+}
+
+void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
+{
+  uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F;
+  
+  /* Check the parameters */
+  assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority));  
+  assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority));
+    
+  if (NVIC_InitStruct->NVIC_IRQChannelCmd != FALSE)
+  {
+    /* Compute the Corresponding IRQ Priority --------------------------------*/    
+    tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08;
+    tmppre = (0x4 - tmppriority);
+    tmpsub = tmpsub >> tmppriority;
+
+    tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre;
+    tmppriority |=  NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub;
+    tmppriority = tmppriority << 0x04;
+        
+    NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority;
+    
+    /* Enable the Selected IRQ Channels --------------------------------------*/
+    NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
+      (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
+  }
+  else
+  {
+    /* Disable the Selected IRQ Channels -------------------------------------*/
+    NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
+      (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
+  }
+}
+
+void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
+{ 
+  /* Check the parameters */
+  assert_param(IS_NVIC_VECTTAB(NVIC_VectTab));
+  assert_param(IS_NVIC_OFFSET(Offset));  
+   
+  SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80);
+}
+
+void NVIC_SystemLPConfig(uint8_t LowPowerMode, BOOL NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_LP(LowPowerMode));
+  
+  if (!NewState)
+  {
+    SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);
+  } else {
+		SCB->SCR |= LowPowerMode;
+	}
+}
+
+void GLB_MMAP(uint32_t from, uint32_t to, BOOL isIcacheOn) {
+	int n;
+	
+	GLOBAL_CTRL->IBUSOFF = GLOBAL_CTRL->DBUSOFF = (from - to);
+	GLOBAL_CTRL->EXTADDR = to;
+	
+	// Delay several cycles 
+	for (n = 0; n < 100; n++);
+	GLOBAL_CTRL->ICACHE_b.EN = isIcacheOn;
+	for (n = 0; n < 100; n++);
+}
+
+void GLB_SetNmiIrqNum(uint32_t irq) {
+	GLOBAL_CTRL->NMI_SEL_b.NMI = irq;
+}
+
+void GLB_SelectSysClkSource(uint8_t source) {
+	switch (source) {
+	case SYS_CLK_SEL_DLL :
+		// M7's DLL clock should be fixed at PLL loation 2
+		// In constrast, it's C2R1.
+		// Wait DLL clock stable
+		while (PDLOCK->GCLK_b.C2R1D == 0) ;
+		GLOBAL_CTRL->CLK_SEL_1_b.SYS_CLK = SYS_CLK_SEL_DLL;
+		break;
+	case SYS_CLK_SEL_CRYSTAL :
+		GLOBAL_CTRL->CLK_SEL_1_b.SYS_CLK = SYS_CLK_SEL_CRYSTAL;
+		break;
+	case SYS_CLK_SEL_EXTERNAL :
+		// TODO, Add the condition that makes sure input
+		// external clock is stable
+		// For example :
+		//	PLL location 0
+		// 	while (PDLOCK->GCLK_b.C1R1P == 0) ;
+		// 	DLL location 0
+		// 	while (PDLOCK->GCLK_b.C1R1D == 0) ;
+		GLOBAL_CTRL->CLK_SEL_1_b.SYS_CLK = SYS_CLK_SEL_EXTERNAL;
+		break;
+	case SYS_CLK_SEL_OSC :
+		// Fall through
+	default :
+		GLOBAL_CTRL->CLK_SEL_1_b.SYS_CLK = SYS_CLK_SEL_OSC;
+		break;		
+	}
+}

bsp/CME_M7/StdPeriph_Driver/src/cmem7_rtc.c

@@ -0,0 +1,63 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_rtc.c
+	*
+	* @brief    CMEM7 RTC source file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+	
+#include "cmem7_rtc.h"
+
+#define SECONDS_IN_A_DAY                (86400)
+
+void RTC_EnableInt(uint32_t Int, BOOL Enable) {
+	assert_param(IS_RTC_INT(Int));  
+	
+	if (Enable) {
+	  GLOBAL_CTRL->RTC_INT_EN |= Int;
+	} else {
+		GLOBAL_CTRL->RTC_INT_EN &= ~Int;
+	}
+}
+
+BOOL RTC_GetIntStatus(uint32_t Int) {
+	assert_param(IS_RTC_INT(Int)); 
+	
+	if (0 != (RTC->INT_STATUS & Int)) {
+		return TRUE;
+	}
+	
+	return FALSE;
+}
+
+void RTC_ClearInt(uint32_t Int) {
+  assert_param(IS_RTC_INT(Int));  
+	
+	RTC->INT_STATUS = Int;
+}
+
+uint32_t RTC_GetSecond() {
+	return RTC->SECOND;
+}
+
+uint16_t RTC_GetMicroSecond() {
+	return RTC->MICROSECOND_b.MS;
+}

bsp/CME_M7/StdPeriph_Driver/src/cmem7_spi.c

@@ -0,0 +1,145 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_spi.c
+	*
+	* @brief    CMEM7 SPI source file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+	
+#include "cmem7_spi.h"
+
+void SPI_Init(SPI0_Type* SPIx, SPI_InitTypeDef *init) {
+	assert_param(IS_SPI_ALL_PERIPH(SPIx));
+	assert_param(init);
+	assert_param(IS_SPI_MODE(init->SPI_Mode));
+	assert_param(init->SPI_BitLength != 0);
+	
+	if (init->SPI_Mode == SPI_MODE_CPOL_0_CPHA_0) {
+		SPIx->CTRL_b.CLK_HIGH = FALSE;
+		SPIx->CTRL_b.NEG_EDGE = TRUE;
+  } else if (init->SPI_Mode == SPI_MODE_CPOL_0_CPHA_1) {
+		SPIx->CTRL_b.CLK_HIGH = FALSE;
+		SPIx->CTRL_b.NEG_EDGE = FALSE;
+  } else if (init->SPI_Mode == SPI_MODE_CPOL_1_CPHA_0) {
+		SPIx->CTRL_b.CLK_HIGH = TRUE;
+		SPIx->CTRL_b.NEG_EDGE = FALSE;
+  } else {
+		SPIx->CTRL_b.CLK_HIGH = TRUE;
+		SPIx->CTRL_b.NEG_EDGE = TRUE;
+  } 		
+
+	SPIx->CTRL_b.RX_EN = init->SPI_RxEn;
+	SPIx->BCNT_b.CNT = init->SPI_BitLength - 1;
+	SPIx->DIV = init->SPI_ClockDividor;
+	SPIx->GAP = (init->SPI_Gap == 0) ? 0 : init->SPI_Gap / 2 + 1;
+}
+
+void SPI_Enable(SPI0_Type* SPIx, BOOL enable) {
+	assert_param(IS_SPI_ALL_PERIPH(SPIx));
+	
+  SPIx->CTRL_b.EN = enable;
+}
+
+void SPI_EnableInt(SPI0_Type* SPIx, uint32_t Int, BOOL enable) {
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+	assert_param(IS_SPI_INT(Int));
+	
+  if (enable) {
+	  SPIx->INT_MASK &= ~Int;
+	} else {
+		SPIx->INT_MASK |= Int;
+	}
+	
+	SPIx->INT_MASK &= SPI_INT_ALL;
+}
+
+BOOL SPI_GetIntStatus(SPI0_Type* SPIx, uint32_t Int) {
+	assert_param(IS_SPI_ALL_PERIPH(SPIx));
+	assert_param(IS_SPI_INT(Int));
+	
+	if (0 != (SPIx->INT_STATUS & Int)) {
+		return TRUE;
+	}
+	
+	return FALSE;
+}
+void SPI_ClearInt(SPI0_Type* SPIx, uint32_t Int) {
+	assert_param(IS_SPI_ALL_PERIPH(SPIx));
+	assert_param(IS_SPI_INT(Int));
+	
+	SPIx->INT_STATUS = Int;
+}
+
+uint8_t SPI_ReadFifo(SPI0_Type* SPIx, uint8_t size, uint32_t* data) {
+	uint8_t count;
+	
+	assert_param(IS_SPI_ALL_PERIPH(SPIx));
+	assert_param(data);
+	
+	if (!SPIx->CTRL_b.EN) {
+		return 0;
+	}
+	
+	count = 0;
+	while (!SPIx->STATUS_b.RFIFO_EMPTY && count < size) {
+	  uint32_t d = SPIx->RW_DATA;
+	  d <<= (32 - SPIx->BCNT_b.CNT - 1);
+	  d >>= (32 - SPIx->BCNT_b.CNT - 1);
+		*(data + count++) = d;
+	}
+	
+	return count;
+}
+	
+uint8_t SPI_WriteFifo(SPI0_Type* SPIx, uint8_t Size, uint32_t* data) {
+	uint8_t count;
+	
+	assert_param(IS_SPI_ALL_PERIPH(SPIx));
+	assert_param(data);
+	
+	if (!SPIx->CTRL_b.EN) {
+		return 0;
+	}
+	
+	count = 0;
+	while (!SPIx->STATUS_b.TFIFO_FULL && count < Size) {
+	  uint32_t d = *(data + count++);
+		d <<= (32 - SPIx->BCNT_b.CNT - 1);
+		SPIx->RW_DATA = d;
+	}
+	
+	return count;
+}
+
+BOOL SPI_Transcation(SPI0_Type* SPIx, uint8_t size) {
+	assert_param(IS_SPI_ALL_PERIPH(SPIx));
+	assert_param(size);
+	
+	if (!SPIx->CTRL_b.EN) {
+		return FALSE;
+	}
+	
+	SPIx->TRANS_CNT = size - 1;
+	SPIx->TRANS_START_b.TX_TRIGGER = TRUE;
+	
+	return TRUE;
+}
+

bsp/CME_M7/StdPeriph_Driver/src/cmem7_tim.c

@@ -0,0 +1,80 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_tim.c
+	*
+	* @brief    CMEM7 timer source file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+	
+#include "cmem7_tim.h"
+
+static uint32_t tim_GetClock() {
+	return SYSTEM_CLOCK_FREQ / (1 << (GLOBAL_CTRL->CLK_SEL_0_b.TIMER_CLK + 1));
+}
+
+void TIM_Init(TIMER0_Type* Timx, uint16_t Ms) {
+	assert_param(IS_TIM_ALL_PERIPH(Timx));
+	
+	Timx->CTRL_b.EN = FALSE;
+	Timx->LEN = tim_GetClock() / 1000 * Ms;
+	Timx->TYPE_b.SIGNLE_SHOT = TRUE;
+}
+
+void TIM_EnableInt(TIMER0_Type* Timx, BOOL Enable) {
+	assert_param(IS_TIM_ALL_PERIPH(Timx));
+	
+	if (Enable == TRUE) {
+	  Timx->INT_EN_b.EN_REVERSE = FALSE;
+	} else {
+		Timx->INT_EN_b.EN_REVERSE = TRUE;
+	}
+}
+
+BOOL TIM_GetIntStatus(TIMER0_Type* Timx) {
+	assert_param(IS_TIM_ALL_PERIPH(Timx));
+	
+	return (Timx->INT_STA_b.STA ? TRUE : FALSE);
+}
+
+void TIM_ClearInt(TIMER0_Type* Timx) {
+	assert_param(IS_TIM_ALL_PERIPH(Timx));
+	
+	Timx->INT_STA_b.STA = 1;
+}
+
+void TIM_Enable(TIMER0_Type* Timx, BOOL Enable) {
+	assert_param(IS_TIM_ALL_PERIPH(Timx));
+	
+	Timx->CTRL_b.EN = Enable;
+}
+
+BOOL TIM_IsOverflow(TIMER0_Type* Timx) {
+	assert_param(IS_TIM_ALL_PERIPH(Timx));
+	
+	return (Timx->CNT == 0) ? TRUE : FALSE;
+}
+
+uint32_t TIM_GetCounter(TIMER0_Type* Timx) {
+	assert_param(IS_TIM_ALL_PERIPH(Timx));
+	
+	return Timx->CNT;
+}
+

bsp/CME_M7/StdPeriph_Driver/src/cmem7_uart.c

@@ -0,0 +1,177 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_uart.c
+	*
+	* @brief    CMEM7 uart file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+
+#include "cmem7_uart.h"
+
+#define UART_Mode_8b                        1
+#define UART_Mode_8b_Parity                 7
+
+#define UART_BaudMode_0                     0
+#define UART_BaudMode_1                     1
+#define UART_BaudMode_Division							19200
+
+#define UART_WR_MAX_FIFO_SIZE               16	
+
+static uint32_t UART_GetClock(UART0_Type* UARTx) {
+	uint32_t dividor;
+
+	if ((uint32_t)UARTx == (uint32_t)UART0) {
+		dividor = GLOBAL_CTRL->CLK_SEL_0_b.UART0_CLK;
+	} else if ((uint32_t)UARTx == (uint32_t)UART1) {
+		dividor = GLOBAL_CTRL->CLK_SEL_0_b.UART1_CLK;
+	} else if ((uint32_t)UARTx == (uint32_t)UART2) {
+		dividor = GLOBAL_CTRL->CLK_SEL_1_b.UART2_CLK;
+	}
+	
+	return SYSTEM_CLOCK_FREQ / (1 << (dividor + 1));
+}
+
+static uint16_t UART_CalcBaudrateReload(uint32_t FreqHz, uint32_t Baudrate) {
+  if (Baudrate <= UART_BaudMode_Division) {                     
+		/** reload in mode 0
+		  *    reload = FreqHz / 16 * Baudrate
+		  * round up 
+		  *    reload = FreqHz / 16 * Baudrate + 1/ 2
+		  *    reload = (2 * FreqHz + 16 * Baudrate) / 2 * 16 * Baudrate
+		  */
+		return ((FreqHz << 1) + (Baudrate << 4)) / (Baudrate << 5);
+	} 
+	
+	/** reload in mode 1
+		*    reload = Baudrate * 16 * 65536 / FreqHz
+		* round up 
+		*    reload = Baudrate * 16 * 65536 / FreqHz + 1/ 2
+		*    reload = (2 * Baudrate * 16 * 65536 + FreqHz) / 2 * FreqHz
+		*/
+	return ((((uint64_t)(Baudrate)) << 21) + FreqHz) / (FreqHz << 1);
+}
+            
+void UART_Init(UART0_Type* UARTx, UART_InitTypeDef *init) {
+ 	assert_param(IS_UART_ALL_PERIPH(UARTx));
+	assert_param(init);
+ 	assert_param(IS_UART_STOPBITS(init->UART_StopBits));
+ 	assert_param(IS_UART_PARITY(init->UART_Parity));
+	
+	/* TODO : assume clock is 50MHz */
+	UARTx->BAUDRATE = UART_CalcBaudrateReload(
+	  UART_GetClock(UARTx), init->UART_BaudRate);
+	UARTx->CTRL_b.MODE = 
+	  (init->UART_Parity == UART_Parity_None) ? 
+	  UART_Mode_8b : UART_Mode_8b_Parity;	
+	UARTx->CTRL_b.STOP = init->UART_StopBits;
+	UARTx->CTRL_b.PARITY = 
+	  (init->UART_Parity == UART_Parity_None) ? 
+	  UART_Parity_Even : init->UART_Parity;
+	UARTx->CTRL_b.LOOPBACK = init->UART_LoopBack;
+	UARTx->CTRL_b.RX_EN = init->UART_RxEn;
+	UARTx->CTRL_b.CTS = init->UART_CtsEn;
+	UARTx->CTRL_b.BAUD_MODE = 
+	  (init->UART_BaudRate > UART_BaudMode_Division) ? 
+	  UART_BaudMode_1 : UART_BaudMode_0;
+	UARTx->CTRL_b.FIFO_EN = TRUE;
+	UARTx->CTRL_b.RX_THRESHOLD = UART_WR_MAX_FIFO_SIZE;
+	UARTx->CTRL_b.RX_HALF_FULL = (UART_WR_MAX_FIFO_SIZE >> 1);
+	UARTx->TIMEOUT = 0xFF;
+	
+	UARTx->INT_MASK |= UART_Int_All;
+	UARTx->INT_SEEN &= UART_Int_All;
+}
+
+void UART_EnableInt(UART0_Type* UARTx, uint32_t Int, BOOL enable) {
+	assert_param(IS_UART_ALL_PERIPH(UARTx));
+	assert_param(IS_UART_INT(Int));
+	
+  if (enable) {
+	  UARTx->INT_MASK &= ~Int;
+	} else {
+		UARTx->INT_MASK |= Int;
+	}
+	
+	UARTx->INT_MASK &= UART_Int_All;
+}
+
+void UART_Enable(UART0_Type* UARTx, BOOL enable) {
+	assert_param(IS_UART_ALL_PERIPH(UARTx));
+	
+	UARTx->RUN_b.EN = enable;
+}
+
+BOOL UART_GetIntStatus(UART0_Type* UARTx, uint32_t Int) {
+	assert_param(IS_UART_ALL_PERIPH(UARTx));
+	assert_param(IS_UART_INT(Int));
+	
+	if (0 != (UARTx->INT_SEEN & Int)) {
+		return TRUE;
+	}
+	
+	return FALSE;
+}
+
+void UART_ClearInt(UART0_Type* UARTx, uint32_t Int) {
+	assert_param(IS_UART_ALL_PERIPH(UARTx));
+	assert_param(IS_UART_INT(Int));
+	
+	UARTx->INT_SEEN = Int;
+}
+
+uint8_t UART_Write(UART0_Type* UARTx, uint8_t Size, uint8_t* Data) {
+	uint8_t count;
+	
+	/* Check the parameters */
+  assert_param(IS_UART_ALL_PERIPH(UARTx));
+	assert_param(Data);
+	
+	if (!UARTx->RUN_b.EN) {
+		return 0;
+	}
+	
+	count = 0;
+	while (!UARTx->STATUS_b.TF && count < Size) {
+		UARTx->TX_BUF = *(Data + count++);
+	}
+  
+	return count;
+}
+
+/* return value is actual read data size */
+uint8_t UART_Read(UART0_Type* UARTx, uint8_t Size, uint8_t* Data) {
+	uint8_t count;
+	
+	assert_param(IS_UART_ALL_PERIPH(UARTx));
+	assert_param(Data);
+	
+	if (!UARTx->RUN_b.EN) {
+		return 0;
+	}
+	
+	count = 0;
+	while (UARTx->STATUS_b.RNE && count < Size) {
+		*(Data + count++) = (UARTx->RX_BUF & 0x00FF);
+	}
+	
+	return count;	
+}
+

bsp/CME_M7/StdPeriph_Driver/src/cmem7_wdg.c

@@ -0,0 +1,58 @@
+/**
+	*****************************************************************************
+	* @file     cmem7_wdg.c
+	*
+	* @brief    CMEM7 watchdog source file
+	*
+	*
+	* @version  V1.0
+	* @date     3. September 2013
+	*
+	* @note               
+	*           
+	*****************************************************************************
+	* @attention
+	*
+	* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+	* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+	* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
+	* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+	* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+	* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+	*
+	* <h2><center>&copy; COPYRIGHT 2013 Capital-micro </center></h2>
+	*****************************************************************************
+	*/
+	
+#include "cmem7_wdg.h"
+
+static uint32_t wdg_GetClock() {
+	return SYSTEM_CLOCK_FREQ / (1 << (GLOBAL_CTRL->CLK_SEL_0_b.WDG_CLK + 1));
+}
+
+void WDG_Init(uint8_t trigger, uint16_t ResetMicroSecond) {
+	assert_param(IS_WDG_TRIGGER_MODE(trigger));
+	
+	WDG->INT_CTRL_b.TRIGGER_MODE = trigger;
+	WDG->LEN = ((uint64_t)wdg_GetClock()) * ResetMicroSecond / 1000;
+}
+
+void WDG_EnableInt(uint8_t Int, BOOL Enable) {
+	assert_param(IS_WDG_INT(Int));
+	
+	WDG->CTRL_b.INT_LEN = Int;
+	WDG->INT_CTRL_b.MASK = !Enable;
+}
+
+BOOL WDG_GetIntStatus() {
+	return (WDG->INT_STA_b.STA == 1) ? TRUE : FALSE;
+}
+
+void WDG_ClearInt() {
+	WDG->INT_STA_b.STA = 1;
+}
+
+void WDG_Enable(BOOL Enable) {
+	WDG->CTRL_b.EN = Enable;
+}
+

bsp/CME_M7/applications/SConscript

@@ -0,0 +1,11 @@
+Import('RTT_ROOT')
+Import('rtconfig')
+from building import *
+
+cwd     = os.path.join(str(Dir('#')), 'applications')
+src	= Glob('*.c')
+CPPPATH = [cwd, str(Dir('#'))]
+
+group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')

bsp/CME_M7/applications/application.c

@@ -0,0 +1,48 @@
+/*
+ * File      : application.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006-2014, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2014-08-03     aozima       first implementation
+ */
+
+#include <board.h>
+#include <rtthread.h>
+
+#include <components.h>
+
+void rt_init_thread_entry(void* parameter)
+{
+    rt_components_init();
+
+#ifdef RT_USING_LWIP
+    cme_m7_eth_init();
+
+    set_if("e0", "192.168.1.99", "192.168.1.1", "255.255.255.0");
+#endif /* RT_USING_LWIP */
+}
+
+int rt_application_init()
+{
+    rt_thread_t tid;
+
+    tid = rt_thread_create("init",
+        rt_init_thread_entry,
+		RT_NULL,
+        2048,
+		RT_THREAD_PRIORITY_MAX/3,
+		20);
+
+    if (tid != RT_NULL)
+        rt_thread_startup(tid);
+
+    return 0;
+}
+
+/*@}*/

bsp/CME_M7/applications/led.c

@@ -0,0 +1,39 @@
+#include <rtthread.h>
+#include <board.h>
+
+static void led_thread_entry(void* parameter)
+{
+    /* Configure GPIO as Output mode */
+    GPIO_Init(GPIO_GROUP_GPIO, 0xFFFFFFFF);
+    GPIO_EnableOutput(GPIO_GROUP_GPIO, 0x81010101);
+
+    // LED4, 200ns period
+    GPIO_InitPwm(GPIO_PWM_CHANNEL_GPIO_31, 100, 100);
+    GPIO_EnablePwm(GPIO_PWM_CHANNEL_GPIO_31, TRUE);
+
+    while(1)
+    {
+        GPIO_Write(GPIO_GROUP_GPIO, 0x01010101, 0x55555555);
+        rt_thread_delay(RT_TICK_PER_SECOND/3);
+        GPIO_Write(GPIO_GROUP_GPIO, 0x01010101, 0xAAAAAAAA);
+        rt_thread_delay(RT_TICK_PER_SECOND/3);
+    }
+}
+
+static int led_thread_init(void)
+{
+    rt_thread_t tid;
+
+    tid = rt_thread_create("led",
+                           led_thread_entry,
+                           RT_NULL,
+                           2048,
+                           RT_THREAD_PRIORITY_MAX - 1,
+                           1);
+
+    if (tid != RT_NULL)
+        rt_thread_startup(tid);
+
+    return 0;
+}
+INIT_APP_EXPORT(led_thread_init);

bsp/CME_M7/applications/startup.c

@@ -0,0 +1,91 @@
+/*
+ * File      : startup.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006-2014, RT-Thread Develop Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://openlab.rt-thread.com/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2014-08-03     aozima       first implementation
+ */
+
+#include <rthw.h>
+#include <rtthread.h>
+
+#include "board.h"
+
+/**
+ * @addtogroup CME_M7
+ */
+
+/*@{*/
+
+extern int  rt_application_init(void);
+
+#ifdef __CC_ARM
+extern int Image$$RW_IRAM1$$ZI$$Limit;
+#define SRAM_BEGIN    (&Image$$RW_IRAM1$$ZI$$Limit)
+#elif __ICCARM__
+#pragma section="HEAP"
+#define SRAM_BEGIN    (__segment_end("HEAP"))
+#else
+extern int __bss_end;
+#define SRAM_BEGIN    (&__bss_end)
+#endif
+
+/**
+ * This function will startup RT-Thread RTOS.
+ */
+void rtthread_startup(void)
+{
+    /* init board */
+    rt_hw_board_init();
+
+    /* show version */
+    rt_show_version();
+
+    /* init tick */
+    rt_system_tick_init();
+
+    /* init kernel object */
+    rt_system_object_init();
+
+    /* init timer system */
+    rt_system_timer_init();
+
+    rt_system_heap_init((void*)SRAM_BEGIN, (void*)SRAM_END);
+
+    /* init scheduler system */
+    rt_system_scheduler_init();
+
+    /* init application */
+    rt_application_init();
+
+    /* init timer thread */
+    rt_system_timer_thread_init();
+
+    /* init idle thread */
+    rt_thread_idle_init();
+
+    /* start scheduler */
+    rt_system_scheduler_start();
+
+    /* never reach here */
+    return ;
+}
+
+int main(void)
+{
+    /* disable interrupt first */
+    rt_hw_interrupt_disable();
+
+    /* startup RT-Thread RTOS */
+    rtthread_startup();
+
+    return 0;
+}
+
+/*@}*/

bsp/CME_M7/drivers/SConscript

@@ -0,0 +1,20 @@
+Import('RTT_ROOT')
+Import('rtconfig')
+from building import *
+
+cwd     = os.path.join(str(Dir('#')), 'drivers')
+
+src	= ['board.c']
+
+# add uart driver.
+src	+= ['uart.c']
+
+# add EMAC driver for Lwip.
+if GetDepend('RT_USING_LWIP') == True:
+    src += ['emac.c', 'app_phy.c']
+
+CPPPATH = [cwd]
+
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')

bsp/CME_M7/drivers/app_phy.c

@@ -0,0 +1,125 @@
+#include <stdio.h>
+#include "app_phy.h"
+
+#define PHY_BASE_ADDR   						0x7
+
+#define PHY_REG_CONTROL             0x0
+#define PHY_REG_STATUS              0x1
+#define PHY_REG_ANE                 0x6
+#define PHY_REG_SPEC_STATUS         0x11
+#define PHY_REG_EXTEND_STATUS				0x1B
+
+#define PHY_BIT_CONTROL_RESET           0x8000			/*!< Control reg : reset */
+#define PHY_BIT_CONTROL_ANEN            0x1000			/*!< Control reg : auto-negotiation enable */
+#define PHY_BIT_CONTROL_RSAN            0x0200			/*!< Control reg : auto-negotiation restart */
+
+#define PHY_BIT_STATUS_ANC              0x0020			/*!< Status reg : auto-negotiation complete */
+#define PHY_BIT_STATUS_LINK             0x0004			/*!< Status reg : link is up */
+
+#define PHY_BIT_ANE_LPAN                0x0001			/*!< ANE reg : link partner can auto-neg */
+
+#define PHY_BIT_SPEED                   0xC000      /*!< specific status reg : speed */
+#define PHY_BIT_DUPLEX                  0x2000      /*!< specific status reg : duplex */
+
+#define PHY_BIT_AUTO_MEDIA_DISABLE      0x8000      /*!< extended status reg : auto media select disable */
+#define PHY_BIT_AUTO_MEDIA_REG_DISABLE  0x0200      /*!< extended status reg : auto media register select disable */
+
+void phy_Reset() {
+	ETH_PhyWrite(PHY_BASE_ADDR, PHY_REG_CONTROL, PHY_BIT_CONTROL_RESET);
+
+	while (1) {
+		uint32_t ret = ETH_PhyRead(PHY_BASE_ADDR, PHY_REG_CONTROL);
+	  if ((ret & PHY_BIT_CONTROL_RESET) == 0) {
+			break;
+		}
+	}
+}
+
+void phy_AutoMediaSelect() {
+	uint32_t data;
+
+	// auto media and auto media register selection
+	data = ETH_PhyRead(PHY_BASE_ADDR, PHY_REG_EXTEND_STATUS);
+	data &= ~PHY_BIT_AUTO_MEDIA_DISABLE;
+	data &= ~PHY_BIT_AUTO_MEDIA_REG_DISABLE;
+	ETH_PhyWrite(PHY_BASE_ADDR, PHY_REG_EXTEND_STATUS, data);
+}
+
+void phy_AutoNeg()
+{
+    uint32_t data;
+
+    data = ETH_PhyRead(PHY_BASE_ADDR, PHY_REG_CONTROL);
+    data |= (PHY_BIT_CONTROL_ANEN | PHY_BIT_CONTROL_RSAN);
+    ETH_PhyWrite(PHY_BASE_ADDR, PHY_REG_CONTROL, data);
+
+    while (1)
+    {
+        uint32_t ret = ETH_PhyRead(PHY_BASE_ADDR, PHY_REG_STATUS);
+        if ((ret & PHY_BIT_STATUS_ANC) == PHY_BIT_STATUS_ANC)
+        {
+            break;
+        }
+        rt_thread_delay(1);
+    }
+}
+
+BOOL phy_IsLink() {
+	uint32_t ret = ETH_PhyRead(PHY_BASE_ADDR, PHY_REG_STATUS);
+	return (ret & PHY_BIT_STATUS_LINK) ? TRUE : FALSE;
+}
+
+BOOL phy_PartnerCanAutoNeg() {
+	uint32_t ret = ETH_PhyRead(PHY_BASE_ADDR, PHY_REG_ANE);
+	return (ret & PHY_BIT_ANE_LPAN) ? TRUE : FALSE;
+}
+
+uint32_t phy_GetSpeed() {
+	uint32_t ret = ETH_PhyRead(PHY_BASE_ADDR, PHY_REG_SPEC_STATUS);
+	return ((ret & PHY_BIT_SPEED) >> 14);
+}
+
+uint32_t phy_GetDuplex() {
+	uint32_t ret = ETH_PhyRead(PHY_BASE_ADDR, PHY_REG_SPEC_STATUS);
+	return ((ret & PHY_BIT_DUPLEX) >> 13);
+}
+
+BOOL phy_Init() {
+	phy_AutoMediaSelect();
+	phy_AutoNeg();
+
+	if (!phy_PartnerCanAutoNeg()) {
+		printf("Warning:: PHY's partner can't do auto-negotiation\n");
+	}
+
+	if (!phy_IsLink()) {
+		printf("link is down\n");
+		return FALSE;
+	}
+
+	{
+		uint32_t speed = phy_GetSpeed();
+		if (speed == PHY_SPEED_10) {
+			speed = 10;
+		} else if (speed == PHY_SPEED_100) {
+			speed = 100;
+		} else if (speed == PHY_SPEED_1000) {
+			speed = 1000;
+		}
+
+		printf("PHY runs in %dM speed %s duplex\n",
+			speed, (phy_GetDuplex() == PHY_DUPLEX_HALF) ? "half" : "full");
+	}
+
+	// After auto-negcioation, Mawell PHY need some
+	// time to initial itself.
+	// So we have to delay some time since different
+	// connection way, such as direct wire, hub, switch.
+	// If not to delay, the first several sent frame
+	// may be lost.
+	// Please according to actual environment to tune
+	// this delay.
+	udelay(200000);
+
+	return TRUE;
+}

bsp/CME_M7/drivers/app_phy.h

@@ -0,0 +1,32 @@
+#ifndef __APP_PHY_H
+#define __APP_PHY_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "cmem7_includes.h"
+
+#define PHY_SPEED_10           			0x0         /*!< SPEED : 10M  */
+#define PHY_SPEED_100          			0x1         /*!< SPEED : 100M  */
+#define PHY_SPEED_1000         			0x2         /*!< SPEED : 1000M  */
+	 
+#define PHY_DUPLEX_HALF        			0x0         /*!< DUPLEX : half  */
+#define PHY_DUPLEX_FULL        			0x1         /*!< DUPLEX : full  */
+	 
+void phy_Reset(void);
+void phy_AutoNeg(void);
+BOOL phy_IsLink(void);
+BOOL phy_PartnerCanAutoNeg(void);
+uint32_t phy_GetSpeed(void);
+uint32_t phy_GetDuplex(void);
+BOOL phy_Init(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif 
+
+
+

bsp/CME_M7/drivers/board.c

@@ -0,0 +1,63 @@
+/*
+ * File      : board.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2009-2014, RT-Thread Develop Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2014-08-03     aozima       first implementation
+ */
+
+#include <rthw.h>
+#include <rtthread.h>
+#include <components.h>
+
+#include "board.h"
+
+/**
+ * @addtogroup CME_M7
+ */
+
+/*@{*/
+
+/**
+ * This is the timer interrupt service routine.
+ *
+ */
+void SysTick_Handler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    rt_tick_increase();
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+static void idle_hook(void)
+{
+    __WFI();
+}
+
+/**
+ * This function will initial board.
+ */
+void rt_hw_board_init()
+{
+    //rt_thread_idle_sethook(idle_hook);
+
+    /* Configure the NVIC Preemption Priority Bits */
+    NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);
+
+    SysTick_Config(SYSTEM_CLOCK_FREQ / RT_TICK_PER_SECOND);
+
+    rt_components_board_init();
+    rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
+}
+
+/*@}*/

bsp/CME_M7/drivers/board.h

@@ -0,0 +1,31 @@
+/*
+ * File      : board.h
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2009-2014, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2014-08-03     aozima       first implementation
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+#include "cmem7_includes.h"
+//#include "cmem7_retarget.h"
+
+#define SRAM_SIZE         64	// KB
+#define SRAM_END          (0x20000000 + SRAM_SIZE * 1024)
+
+//#define RT_USING_UART0
+//#define RT_USING_UART1
+#define RT_USING_UART2
+
+void rt_hw_board_init(void);
+
+#endif
+

bsp/CME_M7/rtconfig.h

@@ -0,0 +1,141 @@
+/* RT-Thread config file */
+#ifndef __RTTHREAD_CFG_H__
+#define __RTTHREAD_CFG_H__
+
+/* RT_NAME_MAX*/
+#define RT_NAME_MAX		8
+
+/* RT_ALIGN_SIZE*/
+#define RT_ALIGN_SIZE	4
+
+/* PRIORITY_MAX */
+#define RT_THREAD_PRIORITY_MAX	32
+
+/* Tick per Second */
+#define RT_TICK_PER_SECOND	100
+
+/* SECTION: RT_DEBUG */
+/* Thread Debug */
+#define RT_DEBUG
+#define RT_USING_OVERFLOW_CHECK
+
+/* Using Hook */
+#define RT_USING_HOOK
+
+/* SECTION: IPC */
+/* Using Semaphore*/
+#define RT_USING_SEMAPHORE
+
+/* Using Mutex */
+#define RT_USING_MUTEX
+
+/* Using Event */
+#define RT_USING_EVENT
+
+/* Using MailBox */
+#define RT_USING_MAILBOX
+
+/* Using Message Queue */
+#define RT_USING_MESSAGEQUEUE
+
+/* SECTION: Memory Management */
+/* Using Memory Pool Management*/
+#define RT_USING_MEMPOOL
+
+/* Using Dynamic Heap Management */
+#define RT_USING_HEAP
+
+/* Using Small MM */
+#define RT_USING_SMALL_MEM
+
+#define RT_USING_COMPONENTS_INIT
+
+/* SECTION: Device System */
+/* Using Device System */
+#define RT_USING_DEVICE
+#define RT_USING_DEVICE_IPC
+#define RT_USING_SERIAL
+
+/* SECTION: Console options */
+#define RT_USING_CONSOLE
+/* the buffer size of console*/
+#define RT_CONSOLEBUF_SIZE	128
+#define RT_CONSOLE_DEVICE_NAME	        "uart2"
+
+/* SECTION: finsh, a C-Express shell */
+#define RT_USING_FINSH
+/* Using symbol table */
+#define FINSH_USING_SYMTAB
+#define FINSH_USING_DESCRIPTION
+#define FINSH_USING_MSH
+//#define FINSH_USING_MSH_ONLY
+
+//#define RT_USING_NEWLIB
+#define RT_USING_ARM_LIBC
+
+/* SECTION: device filesystem */
+/* #define RT_USING_DFS */
+#define RT_USING_DFS_ELMFAT
+#define RT_DFS_ELM_REENTRANT
+#define RT_DFS_ELM_WORD_ACCESS
+#define RT_DFS_ELM_DRIVES			1
+#define RT_DFS_ELM_USE_LFN			2
+#define RT_DFS_ELM_MAX_LFN			255
+#define RT_DFS_ELM_MAX_SECTOR_SIZE  512
+
+/* the max number of mounted filesystem */
+#define DFS_FILESYSTEMS_MAX			2
+/* the max number of opened files 		*/
+#define DFS_FD_MAX					4
+
+/* SECTION: lwip, a lighwight TCP/IP protocol stack */
+#define RT_USING_LWIP
+/* LwIP uses RT-Thread Memory Management */
+// #define RT_LWIP_USING_RT_MEM
+/* Enable ICMP protocol*/
+#define RT_LWIP_ICMP
+/* Enable UDP protocol*/
+#define RT_LWIP_UDP
+/* Enable TCP protocol*/
+#define RT_LWIP_TCP
+/* Enable DNS */
+#define RT_LWIP_DNS
+/* Enable DHCP */
+// #define RT_LWIP_DHCP
+
+/* the number of simulatenously active TCP connections*/
+#define RT_LWIP_TCP_PCB_NUM		3
+
+/* ip address of target*/
+#define RT_LWIP_IPADDR0	192
+#define RT_LWIP_IPADDR1	168
+#define RT_LWIP_IPADDR2	1
+#define RT_LWIP_IPADDR3	30
+
+/* gateway address of target*/
+#define RT_LWIP_GWADDR0	192
+#define RT_LWIP_GWADDR1	168
+#define RT_LWIP_GWADDR2	1
+#define RT_LWIP_GWADDR3	1
+
+/* mask address of target*/
+#define RT_LWIP_MSKADDR0	255
+#define RT_LWIP_MSKADDR1	255
+#define RT_LWIP_MSKADDR2	255
+#define RT_LWIP_MSKADDR3	0
+
+/* tcp thread options */
+#define RT_LWIP_TCPTHREAD_PRIORITY		12
+#define RT_LWIP_TCPTHREAD_MBOX_SIZE		4
+#define RT_LWIP_TCPTHREAD_STACKSIZE		1024
+
+#define RT_LWIP_ETHTHREAD_PRIORITY		15
+#define RT_LWIP_ETHTHREAD_MBOX_SIZE		4
+#define RT_LWIP_ETHTHREAD_STACKSIZE		512
+
+// <bool name="RT_USING_CMSIS_OS" description="Using CMSIS OS API" default="true" />
+// #define RT_USING_CMSIS_OS
+// <bool name="RT_USING_RTT_CMSIS" description="Using CMSIS in RTT" default="true" />
+#define RT_USING_RTT_CMSIS
+
+#endif

bsp/CME_M7/rtconfig.py

@@ -0,0 +1,124 @@
+import os
+
+# toolchains options
+ARCH='arm'
+CPU='cortex-m3'
+CROSS_TOOL='keil'
+
+if os.getenv('RTT_CC'):
+	CROSS_TOOL = os.getenv('RTT_CC')
+
+if  CROSS_TOOL == 'gcc':
+	PLATFORM 	= 'gcc'
+	EXEC_PATH 	= r'C:\Program Files\GNU Tools ARM Embedded\4.8 2013q4\bin'
+elif CROSS_TOOL == 'keil':
+	PLATFORM 	= 'armcc'
+	EXEC_PATH 	= 'C:/Keil'
+elif CROSS_TOOL == 'iar':
+	PLATFORM 	= 'iar'
+	IAR_PATH 	= 'C:/Program Files/IAR Systems/Embedded Workbench 6.0 Evaluation'	
+
+if os.getenv('RTT_EXEC_PATH'):
+	EXEC_PATH = os.getenv('RTT_EXEC_PATH')
+
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+else:
+    RTT_ROOT = os.path.normpath(os.getcwd())
+
+BUILD = 'debug'
+
+if PLATFORM == 'gcc':
+    # toolchains
+    PREFIX = 'arm-none-eabi-'
+    CC = PREFIX + 'gcc'
+    AS = PREFIX + 'gcc'
+    AR = PREFIX + 'ar'
+    LINK = PREFIX + 'gcc'
+    TARGET_EXT = 'elf'
+    SIZE = PREFIX + 'size'
+    OBJDUMP = PREFIX + 'objdump'
+    OBJCPY = PREFIX + 'objcopy'
+
+    DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=softfp  -ffunction-sections -fdata-sections'
+    CFLAGS = DEVICE + ' -g -Wall  -D__FPU_USED'
+    AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb '
+    LFLAGS = DEVICE + ' -lm -lgcc -lc' + ' -nostartfiles  -Wl,--gc-sections,-Map=rtthread.map,-cref,-u,Reset_Handler -T nuc472_flash.ld'
+
+    CPATH = ''
+    LPATH = ''
+
+    if BUILD == 'debug':
+        CFLAGS += ' -O0 -gdwarf-2'
+        AFLAGS += ' -gdwarf-2'
+    else:
+        CFLAGS += ' -O3'
+
+    POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
+
+elif PLATFORM == 'armcc':
+    # toolchains
+    CC = 'armcc'
+    AS = 'armasm'
+    AR = 'armar'
+    LINK = 'armlink'
+    TARGET_EXT = 'axf'
+
+    DEVICE = ' --cortex-m4.fp'
+    CFLAGS = DEVICE + ' --c99 --apcs=interwork'
+    AFLAGS = DEVICE
+    LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers --list rtthread.map --scatter nuc472_flash.sct'
+
+    CFLAGS += ' -I' + EXEC_PATH + '/ARM/RV31/INC'
+    LFLAGS += ' --libpath ' + EXEC_PATH + '/ARM/RV31/LIB'
+
+    EXEC_PATH += '/arm/bin40/'
+
+    if BUILD == 'debug':
+        CFLAGS += ' -g -O0'
+        AFLAGS += ' -g'
+    else:
+        CFLAGS += ' -O2'
+
+    POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
+
+elif PLATFORM == 'iar':
+    # toolchains
+    CC = 'iccarm'
+    AS = 'iasmarm'
+    AR = 'iarchive'
+    LINK = 'ilinkarm'
+    TARGET_EXT = 'out'
+
+    DEVICE = ' -D USE_STDPERIPH_DRIVER'
+
+    CFLAGS = DEVICE
+    CFLAGS += ' --diag_suppress Pa050'
+    CFLAGS += ' --no_cse' 
+    CFLAGS += ' --no_unroll' 
+    CFLAGS += ' --no_inline' 
+    CFLAGS += ' --no_code_motion' 
+    CFLAGS += ' --no_tbaa' 
+    CFLAGS += ' --no_clustering' 
+    CFLAGS += ' --no_scheduling' 
+    CFLAGS += ' --debug' 
+    CFLAGS += ' --endian=little' 
+    CFLAGS += ' --cpu=Cortex-M3' 
+    CFLAGS += ' -e' 
+    CFLAGS += ' --fpu=None'
+    CFLAGS += ' --dlib_config "' + IAR_PATH + '/arm/INC/c/DLib_Config_Normal.h"'    
+    CFLAGS += ' -Ol'    
+        
+    AFLAGS = ''
+    AFLAGS += ' -s+' 
+    AFLAGS += ' -w+' 
+    AFLAGS += ' -r' 
+    AFLAGS += ' --cpu Cortex-M4' 
+    AFLAGS += ' --fpu None' 
+
+    LFLAGS = ' --config nuc472_flash.icf'
+    LFLAGS += ' --semihosting' 
+    LFLAGS += ' --entry __iar_program_start'    
+
+    EXEC_PATH = IAR_PATH + '/arm/bin/'
+    POST_ACTION = ''

bsp/CME_M7/template.uvopt

@@ -0,0 +1,170 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rtthread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>10000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>1</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>1</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>17</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>CapitalMicro\BIN\cmagdi.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>-S0 -C0 -P0 -FD20000000 -FC1000)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>Nu_Link</Key>
+          <Name>-S1 -B115200 -O0</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>1</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Source Group 1</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+  </Group>
+
+</ProjectOpt>