mirror of
https://github.com/RT-Thread/rt-thread.git
synced 2026-11-16 01:05:15 +08:00
[utest][can] Add CAN send and receive tests (#11752)
* [utest][can] Add CAN send and receive tests * [utest][can] Fix external CAN FD receive timeout Check the no-progress timeout after duplicate or unmatched frames, and only wait on the receive semaphore when no complete frame is available. Exit immediately once all expected patterns have been received. Format the test with the current mainline configuration and clang-format 22.1.8. Validation: reproduced the original duplicate/unmatched-frame hang with a 50-tick timeout and a 1000-tick watchdog. All 22 host-stub scenarios pass, including timeout renewal, tick wraparound, empty reads, error propagation, and successful reception. The mainline formatting check also passes. No full BSP build or hardware test was performed.
This commit is contained in:
5 files changed
+1792
No files matched your search
@@ -1,3 +1,4 @@
|
||||
import os
|
||||
from building import *
|
||||
|
||||
cwd = GetCurrentDir()
|
||||
@@ -9,4 +10,9 @@ if not GetDepend('RT_USING_DM'):
|
||||
|
||||
group = DefineGroup('DeviceDrivers', src, depend = ['RT_USING_CAN'], CPPPATH = CPPPATH)
|
||||
|
||||
list = os.listdir(cwd)
|
||||
for item in list:
|
||||
if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
|
||||
group = group + SConscript(os.path.join(item, 'SConscript'))
|
||||
|
||||
Return('group')
|
||||
@@ -0,0 +1,200 @@
|
||||
menu "CAN Test"
|
||||
|
||||
config RT_UTEST_CAN
|
||||
bool "CAN Send and Receive Test"
|
||||
default n
|
||||
select RT_USING_CAN
|
||||
|
||||
if RT_UTEST_CAN
|
||||
|
||||
choice
|
||||
prompt "CAN Test Topology"
|
||||
default RT_CAN_TC_USING_SELF_LOOPBACK
|
||||
|
||||
config RT_CAN_TC_USING_SELF_LOOPBACK
|
||||
bool "Single CAN Self Loopback"
|
||||
help
|
||||
Use one CAN controller to send and receive its own frame. This
|
||||
mode uses CAN loopback configuration and is suitable for boards
|
||||
that support controller loopback or TX/RX self-loop wiring.
|
||||
|
||||
config RT_CAN_TC_USING_EXTERNAL_DEVICE
|
||||
bool "Single CAN with External CAN Device"
|
||||
help
|
||||
Use one CAN controller connected through a CAN transceiver to an
|
||||
external CAN node. The external node must follow the configured
|
||||
transmit and receive frame agreement.
|
||||
|
||||
config RT_CAN_TC_USING_DUAL_DEVICE
|
||||
bool "Two Connected CAN Devices"
|
||||
help
|
||||
Use two CAN controllers connected to the same CAN bus and verify
|
||||
frame transfer in both directions.
|
||||
|
||||
endchoice
|
||||
|
||||
config RT_CAN_TC_DEVICE_NAME
|
||||
string "Device Name for Single CAN Test"
|
||||
default "can1"
|
||||
depends on RT_CAN_TC_USING_SELF_LOOPBACK || RT_CAN_TC_USING_EXTERNAL_DEVICE
|
||||
|
||||
config RT_CAN_TC_TX_DEVICE_NAME
|
||||
string "TX Device Name for Two CAN Test"
|
||||
default "can1"
|
||||
depends on RT_CAN_TC_USING_DUAL_DEVICE
|
||||
|
||||
config RT_CAN_TC_RX_DEVICE_NAME
|
||||
string "RX Device Name for Two CAN Test"
|
||||
default "can2"
|
||||
depends on RT_CAN_TC_USING_DUAL_DEVICE
|
||||
|
||||
config RT_CAN_TC_EXTERNAL_USING_SEND_TEST
|
||||
bool "Enable External Device Send Test"
|
||||
default y
|
||||
depends on RT_CAN_TC_USING_EXTERNAL_DEVICE
|
||||
help
|
||||
Send one standard data frame to the external CAN node. The external
|
||||
node should receive standard ID RT_CAN_TC_TX_FRAME_ID with DLC 8 and
|
||||
payload 0x10, 0x11, ..., 0x17.
|
||||
|
||||
config RT_CAN_TC_EXTERNAL_USING_RECEIVE_TEST
|
||||
bool "Enable External Device Receive Test"
|
||||
default y
|
||||
depends on RT_CAN_TC_USING_EXTERNAL_DEVICE
|
||||
help
|
||||
Wait for one standard data frame from the external CAN node. The
|
||||
external node should send standard ID RT_CAN_TC_RX_FRAME_ID with DLC
|
||||
8 and payload 0x20, 0x21, ..., 0x27.
|
||||
|
||||
config RT_CAN_TC_USING_NONBLOCKING_SEND_TEST
|
||||
bool "Enable Nonblocking Send Test"
|
||||
default n
|
||||
help
|
||||
Send one standard data frame with rt_can_msg.nonblocking set to 1.
|
||||
Self-loopback and dual-device tests verify the frame end to end.
|
||||
The external-device test only verifies that the frame is accepted or
|
||||
queued because the common CAN API has no TX-complete wait interface.
|
||||
Enable this only when the CAN driver implements sendmsg_nonblocking.
|
||||
|
||||
config RT_CAN_TC_TX_FRAME_ID
|
||||
hex "External Device TX Frame ID"
|
||||
range 0 0x7FF
|
||||
default 0x321
|
||||
depends on RT_CAN_TC_USING_EXTERNAL_DEVICE
|
||||
|
||||
config RT_CAN_TC_RX_FRAME_ID
|
||||
hex "External Device RX Frame ID"
|
||||
range 0 0x7FF
|
||||
default 0x322
|
||||
depends on RT_CAN_TC_USING_EXTERNAL_DEVICE
|
||||
|
||||
config RT_CAN_TC_NONBLOCKING_TX_FRAME_ID
|
||||
hex "Nonblocking TX Frame ID"
|
||||
range 0 0x7FF
|
||||
default 0x323
|
||||
depends on RT_CAN_TC_USING_NONBLOCKING_SEND_TEST
|
||||
|
||||
config RT_CAN_TC_BAUD_RATE
|
||||
int "Primary Arbitration Baud Rate for CAN Test"
|
||||
range 10000 1000000
|
||||
default 500000
|
||||
help
|
||||
Select one of the standard CAN rates: 10000, 20000, 50000, 100000,
|
||||
125000, 250000, 500000, 800000, or 1000000 bit/s. This rate is
|
||||
always tested. Self-loopback and dual-device tests can select
|
||||
additional rates. The external-device topology uses only this rate
|
||||
because the peer cannot be switched automatically.
|
||||
|
||||
menu "Additional Arbitration Baud Rates"
|
||||
depends on RT_CAN_TC_USING_SELF_LOOPBACK || RT_CAN_TC_USING_DUAL_DEVICE
|
||||
|
||||
config RT_CAN_TC_TEST_BAUD_RATE_10K
|
||||
bool "Test 10 kbit/s"
|
||||
default n
|
||||
|
||||
config RT_CAN_TC_TEST_BAUD_RATE_20K
|
||||
bool "Test 20 kbit/s"
|
||||
default n
|
||||
|
||||
config RT_CAN_TC_TEST_BAUD_RATE_50K
|
||||
bool "Test 50 kbit/s"
|
||||
default n
|
||||
|
||||
config RT_CAN_TC_TEST_BAUD_RATE_100K
|
||||
bool "Test 100 kbit/s"
|
||||
default n
|
||||
|
||||
config RT_CAN_TC_TEST_BAUD_RATE_125K
|
||||
bool "Test 125 kbit/s"
|
||||
default n
|
||||
|
||||
config RT_CAN_TC_TEST_BAUD_RATE_250K
|
||||
bool "Test 250 kbit/s"
|
||||
default n
|
||||
|
||||
config RT_CAN_TC_TEST_BAUD_RATE_500K
|
||||
bool "Test 500 kbit/s"
|
||||
default n
|
||||
|
||||
config RT_CAN_TC_TEST_BAUD_RATE_800K
|
||||
bool "Test 800 kbit/s"
|
||||
default n
|
||||
|
||||
config RT_CAN_TC_TEST_BAUD_RATE_1M
|
||||
bool "Test 1 Mbit/s"
|
||||
default n
|
||||
|
||||
comment "The primary arbitration rate is always tested"
|
||||
|
||||
endmenu
|
||||
|
||||
config RT_CAN_TC_USING_CANFD
|
||||
bool "Enable CAN FD Test"
|
||||
depends on RT_CAN_USING_CANFD
|
||||
default n
|
||||
help
|
||||
In addition to classic CAN frames, verify CAN FD frames with an
|
||||
extended payload. This is an explicit per-device capability test;
|
||||
enable it only for CAN FD capable controllers and drivers. CAN FD
|
||||
frames are tested only at the primary arbitration rate.
|
||||
|
||||
config RT_CAN_TC_CANFD_DATA_BAUD_RATE
|
||||
int "CAN FD Data Phase Baud Rate"
|
||||
range 10000 10000000
|
||||
default 2000000
|
||||
depends on RT_CAN_TC_USING_CANFD
|
||||
help
|
||||
The data phase may use the same rate as the arbitration phase.
|
||||
Select a higher rate when testing effective bit-rate switching.
|
||||
|
||||
config RT_CAN_TC_CANFD_DATA_LENGTH
|
||||
int "Maximum CAN FD Payload Length"
|
||||
range 12 64
|
||||
default 16
|
||||
depends on RT_CAN_TC_USING_CANFD
|
||||
help
|
||||
Valid CAN FD payload lengths are 12, 16, 20, 24, 32, 48, and 64
|
||||
bytes. Other values in the numeric range are rejected at runtime.
|
||||
|
||||
config RT_CAN_TC_CANFD_BRS
|
||||
bool "Enable CAN FD Bit Rate Switching"
|
||||
default y
|
||||
depends on RT_CAN_TC_USING_CANFD
|
||||
|
||||
config RT_CAN_TC_EXTERNAL_READY_DELAY_MS
|
||||
int "External Node Ready Delay in Milliseconds"
|
||||
range 0 60000
|
||||
default 1000
|
||||
depends on RT_CAN_TC_USING_EXTERNAL_DEVICE
|
||||
help
|
||||
Delay after the DUT is configured and prints the frame agreement.
|
||||
This gives the external node time to start its ordered frame sequence.
|
||||
|
||||
config RT_CAN_TC_TIMEOUT_MS
|
||||
int "RX Timeout in Milliseconds"
|
||||
range 1000 60000
|
||||
default 10000
|
||||
|
||||
endif
|
||||
|
||||
endmenu
|
||||
@@ -0,0 +1,13 @@
|
||||
Import('rtconfig')
|
||||
from building import *
|
||||
|
||||
cwd = GetCurrentDir()
|
||||
src = []
|
||||
CPPPATH = [cwd, cwd + '/../../include']
|
||||
|
||||
if GetDepend(['RT_UTEST_CAN']):
|
||||
src += Glob('*.c')
|
||||
|
||||
group = DefineGroup('utestcases', src, depend = ['RT_USING_UTESTCASES', 'RT_USING_CAN'], CPPPATH = CPPPATH)
|
||||
|
||||
Return('group')
|
||||
File diff suppressed because it is too large.
Load diff
@@ -15,6 +15,7 @@ menu "RT-Thread Utestcases"
|
||||
menu "Drivers"
|
||||
rsource "../../../components/drivers/core/utest/Kconfig"
|
||||
rsource "../../../components/drivers/audio/utest/Kconfig"
|
||||
rsource "../../../components/drivers/can/utest/Kconfig"
|
||||
rsource "../../../components/drivers/ipc/utest/Kconfig"
|
||||
rsource "../../../components/drivers/misc/utest/Kconfig"
|
||||
rsource "../../../components/drivers/pin/utest/Kconfig"
|
||||
|
||||
Reference in new issue
Block a user