rename from lm3s to lm3s8962

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1530 bbd45198-f89e-11dd-88c7-29a3b14d5316
2026-11-09 20:45:41 +08:00 · 2011-06-23 13:31:44 +00:00
1 parent 8c45ba5874
commit 11eb2454a7
@@ -0,0 +1,36 @@
+Import('RTT_ROOT')
+Import('rtconfig')
+from building import *
+
+# The set of source files associated with this SConscript file.
+src = Split("""
+	driverlib/adc.c
+	driverlib/can.c
+	driverlib/comp.c
+	driverlib/cpu.c
+	driverlib/epi.c
+	driverlib/ethernet.c
+	driverlib/flash.c
+	driverlib/gpio.c
+	driverlib/hibernate.c
+	driverlib/i2c.c
+	driverlib/i2s.c
+	driverlib/interrupt.c
+	driverlib/mpu.c
+	driverlib/pwm.c
+	driverlib/qei.c
+	driverlib/ssi.c
+	driverlib/sysctl.c
+	driverlib/systick.c
+	driverlib/timer.c
+	driverlib/uart.c
+	driverlib/udma.c
+	driverlib/usb.c
+	driverlib/watchdog.c
+""")
+
+CPPPATH = [RTT_ROOT + '/bsp/lm3s/Libraries/inc', RTT_ROOT + '/bsp/lm3s/Libraries', RTT_ROOT + '/bsp/lm3s/Libraries/driverlib']
+
+group = DefineGroup('library', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')
@@ -0,0 +1,130 @@
+//*****************************************************************************
+//
+// comp.h - Prototypes for the analog comparator driver.
+//
+// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __COMP_H__
+#define __COMP_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Values that can be passed to ComparatorConfigure() as the ulConfig
+// parameter.  For each group (i.e. COMP_TRIG_xxx, COMP_INT_xxx, etc.), one of
+// the values may be selected and combined together with values from the other
+// groups via a logical OR.
+//
+//*****************************************************************************
+#define COMP_TRIG_NONE          0x00000000  // No ADC trigger
+#define COMP_TRIG_HIGH          0x00000880  // Trigger when high
+#define COMP_TRIG_LOW           0x00000800  // Trigger when low
+#define COMP_TRIG_FALL          0x00000820  // Trigger on falling edge
+#define COMP_TRIG_RISE          0x00000840  // Trigger on rising edge
+#define COMP_TRIG_BOTH          0x00000860  // Trigger on both edges
+#define COMP_INT_HIGH           0x00000010  // Interrupt when high
+#define COMP_INT_LOW            0x00000000  // Interrupt when low
+#define COMP_INT_FALL           0x00000004  // Interrupt on falling edge
+#define COMP_INT_RISE           0x00000008  // Interrupt on rising edge
+#define COMP_INT_BOTH           0x0000000C  // Interrupt on both edges
+#define COMP_ASRCP_PIN          0x00000000  // Dedicated Comp+ pin
+#define COMP_ASRCP_PIN0         0x00000200  // Comp0+ pin
+#define COMP_ASRCP_REF          0x00000400  // Internal voltage reference
+#ifndef DEPRECATED
+#define COMP_OUTPUT_NONE        0x00000000  // No comparator output
+#endif
+#define COMP_OUTPUT_NORMAL      0x00000000  // Comparator output normal
+#define COMP_OUTPUT_INVERT      0x00000002  // Comparator output inverted
+
+//*****************************************************************************
+//
+// Values that can be passed to ComparatorSetRef() as the ulRef parameter.
+//
+//*****************************************************************************
+#define COMP_REF_OFF            0x00000000  // Turn off the internal reference
+#define COMP_REF_0V             0x00000300  // Internal reference of 0V
+#define COMP_REF_0_1375V        0x00000301  // Internal reference of 0.1375V
+#define COMP_REF_0_275V         0x00000302  // Internal reference of 0.275V
+#define COMP_REF_0_4125V        0x00000303  // Internal reference of 0.4125V
+#define COMP_REF_0_55V          0x00000304  // Internal reference of 0.55V
+#define COMP_REF_0_6875V        0x00000305  // Internal reference of 0.6875V
+#define COMP_REF_0_825V         0x00000306  // Internal reference of 0.825V
+#define COMP_REF_0_928125V      0x00000201  // Internal reference of 0.928125V
+#define COMP_REF_0_9625V        0x00000307  // Internal reference of 0.9625V
+#define COMP_REF_1_03125V       0x00000202  // Internal reference of 1.03125V
+#define COMP_REF_1_134375V      0x00000203  // Internal reference of 1.134375V
+#define COMP_REF_1_1V           0x00000308  // Internal reference of 1.1V
+#define COMP_REF_1_2375V        0x00000309  // Internal reference of 1.2375V
+#define COMP_REF_1_340625V      0x00000205  // Internal reference of 1.340625V
+#define COMP_REF_1_375V         0x0000030A  // Internal reference of 1.375V
+#define COMP_REF_1_44375V       0x00000206  // Internal reference of 1.44375V
+#define COMP_REF_1_5125V        0x0000030B  // Internal reference of 1.5125V
+#define COMP_REF_1_546875V      0x00000207  // Internal reference of 1.546875V
+#define COMP_REF_1_65V          0x0000030C  // Internal reference of 1.65V
+#define COMP_REF_1_753125V      0x00000209  // Internal reference of 1.753125V
+#define COMP_REF_1_7875V        0x0000030D  // Internal reference of 1.7875V
+#define COMP_REF_1_85625V       0x0000020A  // Internal reference of 1.85625V
+#define COMP_REF_1_925V         0x0000030E  // Internal reference of 1.925V
+#define COMP_REF_1_959375V      0x0000020B  // Internal reference of 1.959375V
+#define COMP_REF_2_0625V        0x0000030F  // Internal reference of 2.0625V
+#define COMP_REF_2_165625V      0x0000020D  // Internal reference of 2.165625V
+#define COMP_REF_2_26875V       0x0000020E  // Internal reference of 2.26875V
+#define COMP_REF_2_371875V      0x0000020F  // Internal reference of 2.371875V
+
+//*****************************************************************************
+//
+// Prototypes for the APIs.
+//
+//*****************************************************************************
+extern void ComparatorConfigure(unsigned long ulBase, unsigned long ulComp,
+                                unsigned long ulConfig);
+extern void ComparatorRefSet(unsigned long ulBase, unsigned long ulRef);
+extern tBoolean ComparatorValueGet(unsigned long ulBase, unsigned long ulComp);
+extern void ComparatorIntRegister(unsigned long ulBase, unsigned long ulComp,
+                                  void (*pfnHandler)(void));
+extern void ComparatorIntUnregister(unsigned long ulBase,
+                                    unsigned long ulComp);
+extern void ComparatorIntEnable(unsigned long ulBase, unsigned long ulComp);
+extern void ComparatorIntDisable(unsigned long ulBase, unsigned long ulComp);
+extern tBoolean ComparatorIntStatus(unsigned long ulBase, unsigned long ulComp,
+                                    tBoolean bMasked);
+extern void ComparatorIntClear(unsigned long ulBase, unsigned long ulComp);
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __COMP_H__
@@ -0,0 +1,60 @@
+//*****************************************************************************
+//
+// cpu.h - Prototypes for the CPU instruction wrapper functions.
+//
+// Copyright (c) 2006-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __CPU_H__
+#define __CPU_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Prototypes.
+//
+//*****************************************************************************
+extern unsigned long CPUcpsid(void);
+extern unsigned long CPUcpsie(void);
+extern unsigned long CPUprimask(void);
+extern void CPUwfi(void);
+extern unsigned long CPUbasepriGet(void);
+extern void CPUbasepriSet(unsigned long ulNewBasepri);
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __CPU_H__
@@ -0,0 +1,71 @@
+<!--
+Configuration file for Code Red project libdriver
+
+Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+-->
+
+<project chip="LM3S101"
+         target="driver"
+         type="Static library"
+         vendor="LMI">
+  <import src=".">
+    <exclude>{(Makefile|ccs|codered|ewarm|gcc|rvmdk|sourcerygxx)}</exclude>
+    <exclude>{.*\.(ewd|ewp|eww|icf|Opt|sct|sgxx|Uv2|uvopt|uvproj|xml|ld|cmd)}</exclude>
+  </import>
+  <requires>
+    <value>inc</value>
+  </requires>
+  <setting id="assembler.def">
+    <value>codered</value>
+  </setting>
+  <setting id="compiler.def"
+           buildType="Debug"
+           mode="replace">
+    <value>DEBUG</value>
+  </setting>
+  <setting id="compiler.def"
+           buildType="Release"
+           mode="replace">
+    <value>NDEBUG</value>
+  </setting>
+  <setting id="compiler.def">
+    <value>__CODE_RED</value>
+    <value>codered</value>
+    <value>PART_LM3S101</value>
+  </setting>
+  <setting id="compiler.opt"
+           buildType="Debug">
+    <value>-Os</value>
+  </setting>
+  <setting id="compiler.opt"
+           buildType="Release">
+    <value>-Os</value>
+  </setting>
+  <setting id="compiler.flags"
+           buildType="Debug">
+    <value>-Os</value>
+  </setting>
+  <setting id="compiler.flags"
+           buildType="Release">
+    <value>-Os</value>
+  </setting>
+  <setting id="compiler.inc">
+    <value>${workspace_loc:/}</value>
+  </setting>
+</project>
@@ -0,0 +1,53 @@
+//*****************************************************************************
+//
+// debug.h - Macros for assisting debug of the driver library.
+//
+// Copyright (c) 2006-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __DEBUG_H__
+#define __DEBUG_H__
+
+//*****************************************************************************
+//
+// Prototype for the function that is called when an invalid argument is passed
+// to an API.  This is only used when doing a DEBUG build.
+//
+//*****************************************************************************
+extern void __error__(char *pcFilename, unsigned long ulLine);
+
+//*****************************************************************************
+//
+// The ASSERT macro, which does the actual assertion checking.  Typically, this
+// will be for procedure arguments.
+//
+//*****************************************************************************
+#ifdef DEBUG
+#define ASSERT(expr) {                                      \
+                         if(!(expr))                        \
+                         {                                  \
+                             __error__(__FILE__, __LINE__); \
+                         }                                  \
+                     }
+#else
+#define ASSERT(expr)
+#endif
+
+#endif // __DEBUG_H__
@@ -0,0 +1,59 @@
+### uVision2 Project, (C) Keil Software
+### Do not modify !
+
+ cExt (*.c)
+ aExt (*.s*; *.src; *.a*)
+ oExt (*.obj)
+ lExt (*.lib)
+ tExt (*.txt; *.h; *.inc)
+ pExt (*.plm)
+ CppX (*.cpp)
+ DaveTm { 0,0,0,0,0,0,0,0 }
+
+Target (driverlib), 0x0004 // Tools: 'ARM-ADS'
+GRPOPT 1,(Source),1,0,0
+GRPOPT 2,(Documentation),1,0,0
+
+OPTFFF 1,1,1,0,0,0,0,0,<.\adc.c><adc.c>
+OPTFFF 1,2,1,0,0,0,0,0,<.\can.c><can.c>
+OPTFFF 1,3,1,0,0,0,0,0,<.\comp.c><comp.c>
+OPTFFF 1,4,1,0,0,0,0,0,<.\cpu.c><cpu.c>
+OPTFFF 1,5,1,0,0,0,0,0,<.\epi.c><epi.c>
+OPTFFF 1,6,1,0,0,0,0,0,<.\ethernet.c><ethernet.c>
+OPTFFF 1,7,1,0,0,0,0,0,<.\flash.c><flash.c>
+OPTFFF 1,8,1,0,0,0,0,0,<.\gpio.c><gpio.c>
+OPTFFF 1,9,1,0,0,0,0,0,<.\hibernate.c><hibernate.c>
+OPTFFF 1,10,1,0,0,0,0,0,<.\i2c.c><i2c.c>
+OPTFFF 1,11,1,0,0,0,0,0,<.\i2s.c><i2s.c>
+OPTFFF 1,12,1,0,0,0,0,0,<.\interrupt.c><interrupt.c>
+OPTFFF 1,13,1,0,0,0,0,0,<.\mpu.c><mpu.c>
+OPTFFF 1,14,1,0,0,0,0,0,<.\pwm.c><pwm.c>
+OPTFFF 1,15,1,0,0,0,0,0,<.\qei.c><qei.c>
+OPTFFF 1,16,1,0,0,0,0,0,<.\ssi.c><ssi.c>
+OPTFFF 1,17,1,0,0,0,0,0,<.\sysctl.c><sysctl.c>
+OPTFFF 1,18,1,0,0,0,0,0,<.\systick.c><systick.c>
+OPTFFF 1,19,1,0,0,0,0,0,<.\timer.c><timer.c>
+OPTFFF 1,20,1,0,0,0,0,0,<.\uart.c><uart.c>
+OPTFFF 1,21,1,0,0,0,0,0,<.\udma.c><udma.c>
+OPTFFF 1,22,1,0,0,0,0,0,<.\usb.c><usb.c>
+OPTFFF 1,23,1,0,0,0,0,0,<.\watchdog.c><watchdog.c>
+OPTFFF 2,24,5,2,0,1,1,0,<.\readme.txt><readme.txt> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0,0,0,0,0,0,0,0,217,2,0,0,44,1,0,0 }
+
+ExtF <.\readme.txt> 1,1,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0,0,0,0,0,0,0,0,217,2,0,0,44,1,0,0 }
+
+TARGOPT 1, (driverlib)
+ ADSCLK=20000000
+  OPTTT 1,1,1,0
+  OPTHX 1,65535,0,0,0
+  OPTLX 79,66,8,<.\rvmdk\>
+  OPTOX 16
+  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
+  OPTXL 1,1,1,1,1,1,1,0,0
+  OPTFL 1,0,1
+  OPTBL 0,(Data Sheet)<DATASHTS\Luminary\LM3S101.PDF>
+  OPTDL (SARMCM3.DLL)()(DLM.DLL)(-pLM3S101)(SARMCM3.DLL)()(TLM.DLL)(-pLM3S101)
+  OPTDBG 48125,1,()()()()()()()()()() (BIN\UL2CM3.DLL)()()()
+  OPTDF 0x40000002
+  OPTLE <>
+  OPTLC <>
+EndOpt
@@ -0,0 +1,122 @@
+### uVision2 Project, (C) Keil Software
+### Do not modify !
+
+Target (driverlib), 0x0004 // Tools: 'ARM-ADS'
+
+Group (Source)
+Group (Documentation)
+
+File 1,1,<.\adc.c><adc.c> 0x0
+File 1,1,<.\can.c><can.c> 0x0
+File 1,1,<.\comp.c><comp.c> 0x0
+File 1,1,<.\cpu.c><cpu.c> 0x0
+File 1,1,<.\epi.c><epi.c> 0x0
+File 1,1,<.\ethernet.c><ethernet.c> 0x0
+File 1,1,<.\flash.c><flash.c> 0x0
+File 1,1,<.\gpio.c><gpio.c> 0x0
+File 1,1,<.\hibernate.c><hibernate.c> 0x0
+File 1,1,<.\i2c.c><i2c.c> 0x0
+File 1,1,<.\i2s.c><i2s.c> 0x0
+File 1,1,<.\interrupt.c><interrupt.c> 0x0
+File 1,1,<.\mpu.c><mpu.c> 0x0
+File 1,1,<.\pwm.c><pwm.c> 0x0
+File 1,1,<.\qei.c><qei.c> 0x0
+File 1,1,<.\ssi.c><ssi.c> 0x0
+File 1,1,<.\sysctl.c><sysctl.c> 0x0
+File 1,1,<.\systick.c><systick.c> 0x0
+File 1,1,<.\timer.c><timer.c> 0x0
+File 1,1,<.\uart.c><uart.c> 0x0
+File 1,1,<.\udma.c><udma.c> 0x0
+File 1,1,<.\usb.c><usb.c> 0x0
+File 1,1,<.\watchdog.c><watchdog.c> 0x0
+File 2,5,<.\readme.txt><readme.txt> 0x0
+
+
+Options 1,0,0  // Target 'driverlib'
+ Device (LM3S101)
+ Vendor (Luminary Micro)
+ Cpu (IRAM(0x20000000-0x200007FF) IROM(0-0x1FFF) CLOCK(20000000) CPUTYPE("Cortex-M3"))
+ FlashUt ()
+ StupF ("STARTUP\Luminary\Startup.s" ("Luminary Startup Code"))
+ FlashDR (UL2CM3(-UU0101L5E -O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0LM3S_8 -FS00 -FL02000))
+ DevID (4079)
+ Rgf (LM3Sxxx.H)
+ Mem ()
+ C ()
+ A ()
+ RL ()
+ OH ()
+ DBC_IFX ()
+ DBC_CMS ()
+ DBC_AMS ()
+ DBC_LMS ()
+ UseEnv=0
+ EnvBin ()
+ EnvInc ()
+ EnvLib ()
+ EnvReg (ÿLuminary\)
+ OrgReg (ÿLuminary\)
+ TgStat=0
+ OutDir (.\rvmdk\)
+ OutName (driverlib)
+ GenApp=0
+ GenLib=1
+ GenHex=0
+ Debug=1
+ Browse=1
+ LstDir (.\rvmdk\)
+ HexSel=1
+ MG32K=0
+ TGMORE=0
+ RunUsr 0 0 <>
+ RunUsr 1 0 <>
+ BrunUsr 0 0 <>
+ BrunUsr 1 0 <>
+ CrunUsr 0 0 <>
+ CrunUsr 1 0 <>
+ SVCSID <>
+ GLFLAGS=1790
+ ADSFLGA { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ACPUTYP (Cortex-M3)
+ ADSTFLGA { 0,12,0,18,99,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 }
+ OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ OCMADSIRAM { 0,0,0,0,32,0,128,0,0 }
+ OCMADSIROM { 1,0,0,0,0,0,120,1,0 }
+ OCMADSXRAM { 0,0,0,0,0,0,0,0,0 }
+ OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,8,0,0,0,0,0,0,0,0,0,0,0 }
+ RV_STAVEC ()
+ ADSCCFLG { 12,34,0,4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ADSCMISC ()
+ ADSCDEFN (rvmdk)
+ ADSCUDEF ()
+ ADSCINCD (..;)
+ ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ADSAMISC ()
+ ADSADEFN ()
+ ADSAUDEF ()
+ ADSAINCD ()
+ PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ IncBld=1
+ AlwaysBuild=0
+ GenAsm=0
+ AsmAsm=0
+ PublicsOnly=0
+ StopCode=3
+ CustArgs ()
+ LibMods ()
+ ADSLDFG { 16,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ADSLDTA (0x00000000)
+ ADSLDDA (0x20000000)
+ ADSLDSC ()
+ ADSLDIB ()
+ ADSLDIC ()
+ ADSLDMC ()
+ ADSLDIF ()
+ ADSLDDW ()
+  OPTDL (SARMCM3.DLL)()(DLM.DLL)(-pLM3S101)(SARMCM3.DLL)()(TLM.DLL)(-pLM3S101)
+  OPTDBG 48125,1,()()()()()()()()()() (BIN\UL2CM3.DLL)()()()
+ FLASH1 { 1,0,0,0,1,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0 }
+ FLASH2 (BIN\UL2CM3.DLL)
+ FLASH3 ("" ())
+ FLASH4 ()
+EndOpt
@@ -0,0 +1,169 @@
+//*****************************************************************************
+//
+// ethernet.h - Defines and Macros for the ethernet module.
+//
+// Copyright (c) 2006-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __ETHERNET_H__
+#define __ETHERNET_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Values that can be passed to EthernetConfigSet as the ulConfig value, and
+// returned from EthernetConfigGet.
+//
+//*****************************************************************************
+#define ETH_CFG_TS_TSEN         0x010000    // Enable Timestamp (CCP)
+#define ETH_CFG_RX_BADCRCDIS    0x000800    // Disable RX BAD CRC Packets
+#define ETH_CFG_RX_PRMSEN       0x000400    // Enable RX Promiscuous
+#define ETH_CFG_RX_AMULEN       0x000200    // Enable RX Multicast
+#define ETH_CFG_TX_DPLXEN       0x000010    // Enable TX Duplex Mode
+#define ETH_CFG_TX_CRCEN        0x000004    // Enable TX CRC Generation
+#define ETH_CFG_TX_PADEN        0x000002    // Enable TX Padding
+
+//*****************************************************************************
+//
+// Values that can be passed to EthernetIntEnable, EthernetIntDisable, and
+// EthernetIntClear as the ulIntFlags parameter, and returned from
+// EthernetIntStatus.
+//
+//*****************************************************************************
+#define ETH_INT_PHY             0x040       // PHY Event/Interrupt
+#define ETH_INT_MDIO            0x020       // Management Transaction
+#define ETH_INT_RXER            0x010       // RX Error
+#define ETH_INT_RXOF            0x008       // RX FIFO Overrun
+#define ETH_INT_TX              0x004       // TX Complete
+#define ETH_INT_TXER            0x002       // TX Error
+#define ETH_INT_RX              0x001       // RX Complete
+
+//*****************************************************************************
+//
+// Helper Macros for Ethernet Processing
+//
+//*****************************************************************************
+//
+// htonl/ntohl - big endian/little endian byte swapping macros for
+// 32-bit (long) values
+//
+//*****************************************************************************
+#ifndef htonl
+    #define htonl(a)                    \
+        ((((a) >> 24) & 0x000000ff) |   \
+         (((a) >>  8) & 0x0000ff00) |   \
+         (((a) <<  8) & 0x00ff0000) |   \
+         (((a) << 24) & 0xff000000))
+#endif
+
+#ifndef ntohl
+    #define ntohl(a)    htonl((a))
+#endif
+
+//*****************************************************************************
+//
+// htons/ntohs - big endian/little endian byte swapping macros for
+// 16-bit (short) values
+//
+//*****************************************************************************
+#ifndef htons
+    #define htons(a)                \
+        ((((a) >> 8) & 0x00ff) |    \
+         (((a) << 8) & 0xff00))
+#endif
+
+#ifndef ntohs
+    #define ntohs(a)    htons((a))
+#endif
+
+//*****************************************************************************
+//
+// API Function prototypes
+//
+//*****************************************************************************
+extern void EthernetInitExpClk(unsigned long ulBase, unsigned long ulEthClk);
+extern void EthernetConfigSet(unsigned long ulBase, unsigned long ulConfig);
+extern unsigned long EthernetConfigGet(unsigned long ulBase);
+extern void EthernetMACAddrSet(unsigned long ulBase,
+                               unsigned char *pucMACAddr);
+extern void EthernetMACAddrGet(unsigned long ulBase,
+                               unsigned char *pucMACAddr);
+extern void EthernetEnable(unsigned long ulBase);
+extern void EthernetDisable(unsigned long ulBase);
+extern tBoolean EthernetPacketAvail(unsigned long ulBase);
+extern tBoolean EthernetSpaceAvail(unsigned long ulBase);
+extern long EthernetPacketGetNonBlocking(unsigned long ulBase,
+                                         unsigned char *pucBuf,
+                                         long lBufLen);
+extern long EthernetPacketGet(unsigned long ulBase, unsigned char *pucBuf,
+                              long lBufLen);
+extern long EthernetPacketPutNonBlocking(unsigned long ulBase,
+                                         unsigned char *pucBuf,
+                                         long lBufLen);
+extern long EthernetPacketPut(unsigned long ulBase, unsigned char *pucBuf,
+                              long lBufLen);
+extern void EthernetIntRegister(unsigned long ulBase,
+                                void (*pfnHandler)(void));
+extern void EthernetIntUnregister(unsigned long ulBase);
+extern void EthernetIntEnable(unsigned long ulBase, unsigned long ulIntFlags);
+extern void EthernetIntDisable(unsigned long ulBase, unsigned long ulIntFlags);
+extern unsigned long EthernetIntStatus(unsigned long ulBase, tBoolean bMasked);
+extern void EthernetIntClear(unsigned long ulBase, unsigned long ulIntFlags);
+extern void EthernetPHYWrite(unsigned long ulBase, unsigned char ucRegAddr,
+                             unsigned long ulData);
+extern unsigned long EthernetPHYRead(unsigned long ulBase,
+                                     unsigned char ucRegAddr);
+
+//*****************************************************************************
+//
+// Several Ethernet APIs have been renamed, with the original function name
+// being deprecated.  These defines provide backward compatibility.
+//
+//*****************************************************************************
+#ifndef DEPRECATED
+#include "driverlib/sysctl.h"
+#define EthernetInit(a)                         \
+        EthernetInitExpClk(a, SysCtlClockGet())
+#define EthernetPacketNonBlockingGet(a, b, c) \
+        EthernetPacketGetNonBlocking(a, b, c)
+#define EthernetPacketNonBlockingPut(a, b, c) \
+        EthernetPacketPutNonBlocking(a, b, c)
+#endif
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif //  __ETHERNET_H__
@@ -0,0 +1,106 @@
+//*****************************************************************************
+//
+// flash.h - Prototypes for the flash driver.
+//
+// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __FLASH_H__
+#define __FLASH_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Values that can be passed to FlashProtectSet(), and returned by
+// FlashProtectGet().
+//
+//*****************************************************************************
+typedef enum
+{
+    FlashReadWrite,                         // Flash can be read and written
+    FlashReadOnly,                          // Flash can only be read
+    FlashExecuteOnly                        // Flash can only be executed
+}
+tFlashProtection;
+
+//*****************************************************************************
+//
+// Values passed to FlashIntEnable(), FlashIntDisable() and FlashIntClear() and
+// returned from FlashIntStatus().
+//
+//*****************************************************************************
+#define FLASH_INT_PROGRAM       0x00000002  // Programming Interrupt Mask
+#define FLASH_INT_ACCESS        0x00000001  // Access Interrupt Mask
+
+//*****************************************************************************
+//
+// Prototypes for the APIs.
+//
+//*****************************************************************************
+extern unsigned long FlashUsecGet(void);
+extern void FlashUsecSet(unsigned long ulClocks);
+extern long FlashErase(unsigned long ulAddress);
+extern long FlashProgram(unsigned long *pulData, unsigned long ulAddress,
+                         unsigned long ulCount);
+extern tFlashProtection FlashProtectGet(unsigned long ulAddress);
+extern long FlashProtectSet(unsigned long ulAddress,
+                            tFlashProtection eProtect);
+extern long FlashProtectSave(void);
+extern long FlashUserGet(unsigned long *pulUser0, unsigned long *pulUser1);
+extern long FlashUserSet(unsigned long ulUser0, unsigned long ulUser1);
+extern long FlashUserSave(void);
+extern void FlashIntRegister(void (*pfnHandler)(void));
+extern void FlashIntUnregister(void);
+extern void FlashIntEnable(unsigned long ulIntFlags);
+extern void FlashIntDisable(unsigned long ulIntFlags);
+extern unsigned long FlashIntStatus(tBoolean bMasked);
+extern void FlashIntClear(unsigned long ulIntFlags);
+
+//*****************************************************************************
+//
+// Deprecated function names.  These definitions ensure backwards compatibility
+// but new code should avoid using deprecated function names since these will
+// be removed at some point in the future.
+//
+//*****************************************************************************
+#ifndef DEPRECATED
+#define FlashIntGetStatus       FlashIntStatus
+#endif
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __FLASH_H__
@@ -0,0 +1,127 @@
+//*****************************************************************************
+//
+// hibernate.h - API definition for the Hibernation module.
+//
+// Copyright (c) 2007-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __HIBERNATE_H__
+#define __HIBERNATE_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Macros needed for selecting the clock source for HibernateClockSelect()
+//
+//*****************************************************************************
+#define HIBERNATE_CLOCK_SEL_RAW         0x04
+#define HIBERNATE_CLOCK_SEL_DIV128      0x00
+
+//*****************************************************************************
+//
+// Macros need to configure wake events for HibernateWakeSet()
+//
+//*****************************************************************************
+#define HIBERNATE_WAKE_PIN              0x10
+#define HIBERNATE_WAKE_RTC              0x08
+
+//*****************************************************************************
+//
+// Macros needed to configure low battery detect for HibernateLowBatSet()
+//
+//*****************************************************************************
+#define HIBERNATE_LOW_BAT_DETECT        0x20
+#define HIBERNATE_LOW_BAT_ABORT         0xA0
+
+//*****************************************************************************
+//
+// Macros defining interrupt source bits for the interrupt functions.
+//
+//*****************************************************************************
+#define HIBERNATE_INT_PIN_WAKE          0x08
+#define HIBERNATE_INT_LOW_BAT           0x04
+#define HIBERNATE_INT_RTC_MATCH_0       0x01
+#define HIBERNATE_INT_RTC_MATCH_1       0x02
+
+//*****************************************************************************
+//
+// API Function prototypes
+//
+//*****************************************************************************
+extern void HibernateEnableExpClk(unsigned long ulHibClk);
+extern void HibernateDisable(void);
+extern void HibernateClockSelect(unsigned long ulClockInput);
+extern void HibernateRTCEnable(void);
+extern void HibernateRTCDisable(void);
+extern void HibernateWakeSet(unsigned long ulWakeFlags);
+extern unsigned long HibernateWakeGet(void);
+extern void HibernateLowBatSet(unsigned long ulLowBatFlags);
+extern unsigned long HibernateLowBatGet(void);
+extern void HibernateRTCSet(unsigned long ulRTCValue);
+extern unsigned long HibernateRTCGet(void);
+extern void HibernateRTCMatch0Set(unsigned long ulMatch);
+extern unsigned long HibernateRTCMatch0Get(void);
+extern void HibernateRTCMatch1Set(unsigned long ulMatch);
+extern unsigned long HibernateRTCMatch1Get(void);
+extern void HibernateRTCTrimSet(unsigned long ulTrim);
+extern unsigned long HibernateRTCTrimGet(void);
+extern void HibernateDataSet(unsigned long *pulData, unsigned long ulCount);
+extern void HibernateDataGet(unsigned long *pulData, unsigned long ulCount);
+extern void HibernateRequest(void);
+extern void HibernateIntEnable(unsigned long ulIntFlags);
+extern void HibernateIntDisable(unsigned long ulIntFlags);
+extern void HibernateIntRegister(void (*pfnHandler)(void));
+extern void HibernateIntUnregister(void);
+extern unsigned long HibernateIntStatus(tBoolean bMasked);
+extern void HibernateIntClear(unsigned long ulIntFlags);
+extern unsigned int HibernateIsActive(void);
+
+//*****************************************************************************
+//
+// Several Hibernate module APIs have been renamed, with the original function
+// name being deprecated.  These defines provide backward compatibility.
+//
+//*****************************************************************************
+#ifndef DEPRECATED
+#include "driverlib/sysctl.h"
+#define HibernateEnable(a)                         \
+        HibernateEnableExpClk(a, SysCtlClockGet())
+#endif
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif  // __HIBERNATE_H__
@@ -0,0 +1,177 @@
+//*****************************************************************************
+//
+// i2c.h - Prototypes for the I2C Driver.
+//
+// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __I2C_H__
+#define __I2C_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Defines for the API.
+//
+//*****************************************************************************
+
+//*****************************************************************************
+//
+// Interrupt defines.
+//
+//*****************************************************************************
+#define I2C_INT_MASTER          0x00000001
+#define I2C_INT_SLAVE           0x00000002
+
+//*****************************************************************************
+//
+// I2C Master commands.
+//
+//*****************************************************************************
+#define I2C_MASTER_CMD_SINGLE_SEND                                            \
+                                0x00000007
+#define I2C_MASTER_CMD_SINGLE_RECEIVE                                         \
+                                0x00000007
+#define I2C_MASTER_CMD_BURST_SEND_START                                       \
+                                0x00000003
+#define I2C_MASTER_CMD_BURST_SEND_CONT                                        \
+                                0x00000001
+#define I2C_MASTER_CMD_BURST_SEND_FINISH                                      \
+                                0x00000005
+#define I2C_MASTER_CMD_BURST_SEND_ERROR_STOP                                  \
+                                0x00000004
+#define I2C_MASTER_CMD_BURST_RECEIVE_START                                    \
+                                0x0000000b
+#define I2C_MASTER_CMD_BURST_RECEIVE_CONT                                     \
+                                0x00000009
+#define I2C_MASTER_CMD_BURST_RECEIVE_FINISH                                   \
+                                0x00000005
+#define I2C_MASTER_CMD_BURST_RECEIVE_ERROR_STOP                               \
+                                0x00000004
+
+//*****************************************************************************
+//
+// I2C Master error status.
+//
+//*****************************************************************************
+#define I2C_MASTER_ERR_NONE     0
+#define I2C_MASTER_ERR_ADDR_ACK 0x00000004
+#define I2C_MASTER_ERR_DATA_ACK 0x00000008
+#define I2C_MASTER_ERR_ARB_LOST 0x00000010
+
+//*****************************************************************************
+//
+// I2C Slave action requests
+//
+//*****************************************************************************
+#define I2C_SLAVE_ACT_NONE      0
+#define I2C_SLAVE_ACT_RREQ      0x00000001  // Master has sent data
+#define I2C_SLAVE_ACT_TREQ      0x00000002  // Master has requested data
+#define I2C_SLAVE_ACT_RREQ_FBR  0x00000005  // Master has sent first byte
+
+//*****************************************************************************
+//
+// Miscellaneous I2C driver definitions.
+//
+//*****************************************************************************
+#define I2C_MASTER_MAX_RETRIES  1000        // Number of retries
+
+//*****************************************************************************
+//
+// I2C Slave interrupts.
+//
+//*****************************************************************************
+#define I2C_SLAVE_INT_STOP      0x00000004  // Stop Condition Interrupt.
+#define I2C_SLAVE_INT_START     0x00000002  // Start Condition Interrupt.
+#define I2C_SLAVE_INT_DATA      0x00000001  // Data Interrupt.
+
+//*****************************************************************************
+//
+// Prototypes for the APIs.
+//
+//*****************************************************************************
+extern void I2CIntRegister(unsigned long ulBase, void(fnHandler)(void));
+extern void I2CIntUnregister(unsigned long ulBase);
+extern tBoolean I2CMasterBusBusy(unsigned long ulBase);
+extern tBoolean I2CMasterBusy(unsigned long ulBase);
+extern void I2CMasterControl(unsigned long ulBase, unsigned long ulCmd);
+extern unsigned long I2CMasterDataGet(unsigned long ulBase);
+extern void I2CMasterDataPut(unsigned long ulBase, unsigned char ucData);
+extern void I2CMasterDisable(unsigned long ulBase);
+extern void I2CMasterEnable(unsigned long ulBase);
+extern unsigned long I2CMasterErr(unsigned long ulBase);
+extern void I2CMasterInitExpClk(unsigned long ulBase, unsigned long ulI2CClk,
+                                tBoolean bFast);
+extern void I2CMasterIntClear(unsigned long ulBase);
+extern void I2CMasterIntDisable(unsigned long ulBase);
+extern void I2CMasterIntEnable(unsigned long ulBase);
+extern tBoolean I2CMasterIntStatus(unsigned long ulBase, tBoolean bMasked);
+extern void I2CMasterSlaveAddrSet(unsigned long ulBase,
+                                  unsigned char ucSlaveAddr,
+                                  tBoolean bReceive);
+extern unsigned long I2CSlaveDataGet(unsigned long ulBase);
+extern void I2CSlaveDataPut(unsigned long ulBase, unsigned char ucData);
+extern void I2CSlaveDisable(unsigned long ulBase);
+extern void I2CSlaveEnable(unsigned long ulBase);
+extern void I2CSlaveInit(unsigned long ulBase, unsigned char ucSlaveAddr);
+extern void I2CSlaveIntClear(unsigned long ulBase);
+extern void I2CSlaveIntDisable(unsigned long ulBase);
+extern void I2CSlaveIntEnable(unsigned long ulBase);
+extern void I2CSlaveIntClearEx(unsigned long ulBase, unsigned long ulIntFlags);
+extern void I2CSlaveIntDisableEx(unsigned long ulBase,
+                                 unsigned long ulIntFlags);
+extern void I2CSlaveIntEnableEx(unsigned long ulBase, unsigned long ulIntFlags);
+extern tBoolean I2CSlaveIntStatus(unsigned long ulBase, tBoolean bMasked);
+extern unsigned long I2CSlaveIntStatusEx(unsigned long ulBase,
+                                         tBoolean bMasked);
+extern unsigned long I2CSlaveStatus(unsigned long ulBase);
+
+//*****************************************************************************
+//
+// Several I2C APIs have been renamed, with the original function name being
+// deprecated.  These defines provide backward compatibility.
+//
+//*****************************************************************************
+#ifndef DEPRECATED
+#include "driverlib/sysctl.h"
+#define I2CMasterInit(a, b)                         \
+        I2CMasterInitExpClk(a, SysCtlClockGet(), b)
+#endif
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __I2C_H__
@@ -0,0 +1,154 @@
+//*****************************************************************************
+//
+// i2s.h - Prototypes and macros for the I2S controller.
+//
+// Copyright (c) 2008-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __I2S_H__
+#define __I2S_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Values that can be passed to I2STxConfigSet() and I2SRxConfigSet()
+//
+//*****************************************************************************
+#define I2S_CONFIG_FORMAT_MASK  0x3C000000  //  JST,  DLY,  SCP,  LRP
+#define I2S_CONFIG_FORMAT_I2S   0x14000000  // !JST,  DLY, !SCP,  LRP
+#define I2S_CONFIG_FORMAT_LEFT_JUST \
+                                0x00000000  // !JST, !DLY, !SCP, !LRP
+#define I2S_CONFIG_FORMAT_RIGHT_JUST \
+                                0x20000000  //  JST, !DLY, !SCP, !LRP
+
+#define I2S_CONFIG_SCLK_INVERT  0x08000000
+
+#define I2S_CONFIG_MODE_MASK    0x03000000
+#define I2S_CONFIG_MODE_DUAL    0x00000000
+#define I2S_CONFIG_MODE_COMPACT_16 \
+                                0x01000000
+#define I2S_CONFIG_MODE_COMPACT_8 \
+                                0x03000000
+#define I2S_CONFIG_MODE_MONO    0x02000000
+
+#define I2S_CONFIG_EMPTY_MASK   0x00800000
+#define I2S_CONFIG_EMPTY_ZERO   0x00000000
+#define I2S_CONFIG_EMPTY_REPEAT 0x00800000
+
+#define I2S_CONFIG_CLK_MASK     0x00400000
+#define I2S_CONFIG_CLK_MASTER   0x00400000
+#define I2S_CONFIG_CLK_SLAVE    0x00000000
+
+#define I2S_CONFIG_SAMPLE_SIZE_MASK \
+                                0x0000FC00
+#define I2S_CONFIG_SAMPLE_SIZE_32 \
+                                0x00007C00
+#define I2S_CONFIG_SAMPLE_SIZE_24 \
+                                0x00005C00
+#define I2S_CONFIG_SAMPLE_SIZE_20 \
+                                0x00004C00
+#define I2S_CONFIG_SAMPLE_SIZE_16 \
+                                0x00003C00
+#define I2S_CONFIG_SAMPLE_SIZE_8 \
+                                0x00001C00
+
+#define I2S_CONFIG_WIRE_SIZE_MASK \
+                                0x000003F0
+#define I2S_CONFIG_WIRE_SIZE_32 0x000001F0
+#define I2S_CONFIG_WIRE_SIZE_24 0x00000170
+#define I2S_CONFIG_WIRE_SIZE_20 0x00000130
+#define I2S_CONFIG_WIRE_SIZE_16 0x000000F0
+#define I2S_CONFIG_WIRE_SIZE_8  0x00000070
+
+//*****************************************************************************
+//
+// Values that can be passed to I2SMasterClockSelect()
+//
+//*****************************************************************************
+#define I2S_TX_MCLK_EXT         0x00000010
+#define I2S_TX_MCLK_INT         0x00000000
+#define I2S_RX_MCLK_EXT         0x00000020
+#define I2S_RX_MCLK_INT         0x00000000
+
+//*****************************************************************************
+//
+// Values that can be passed to I2SIntEnable(), I2SIntDisable(), and
+// I2SIntClear()
+//
+//*****************************************************************************
+#define I2S_INT_RXERR           0x00000020
+#define I2S_INT_RXREQ           0x00000010
+#define I2S_INT_TXERR           0x00000002
+#define I2S_INT_TXREQ           0x00000001
+
+//*****************************************************************************
+//
+// API Function prototypes
+//
+//*****************************************************************************
+extern void I2STxEnable(unsigned long ulBase);
+extern void I2STxDisable(unsigned long ulBase);
+extern void I2STxDataPut(unsigned long ulBase, unsigned long ulData);
+extern long I2STxDataPutNonBlocking(unsigned long ulBase,
+                                    unsigned long ulData);
+extern void I2STxConfigSet(unsigned long ulBase, unsigned long ulConfig);
+extern void I2STxFIFOLimitSet(unsigned long ulBase, unsigned long ulLevel);
+extern unsigned long I2STxFIFOLimitGet(unsigned long ulBase);
+extern unsigned long I2STxFIFOLevelGet(unsigned long ulBase);
+extern void I2SRxEnable(unsigned long ulBase);
+extern void I2SRxDisable(unsigned long ulBase);
+extern void I2SRxDataGet(unsigned long ulBase, unsigned long *pulData);
+extern long I2SRxDataGetNonBlocking(unsigned long ulBase,
+                                    unsigned long *pulData);
+extern void I2SRxConfigSet(unsigned long ulBase, unsigned long ulConfig);
+extern void I2SRxFIFOLimitSet(unsigned long ulBase, unsigned long ulLevel);
+extern unsigned long I2SRxFIFOLimitGet(unsigned long ulBase);
+extern unsigned long I2SRxFIFOLevelGet(unsigned long ulBase);
+extern void I2STxRxEnable(unsigned long ulBase);
+extern void I2STxRxDisable(unsigned long ulBase);
+extern void I2STxRxConfigSet(unsigned long ulBase, unsigned long ulConfig);
+extern void I2SMasterClockSelect(unsigned long ulBase, unsigned long ulMClock);
+extern void I2SIntEnable(unsigned long ulBase, unsigned long ulIntFlags);
+extern void I2SIntDisable(unsigned long ulBase, unsigned long ulIntFlags);
+extern unsigned long I2SIntStatus(unsigned long ulBase, tBoolean bMasked);
+extern void I2SIntClear(unsigned long ulBase, unsigned long ulIntFlags);
+extern void I2SIntRegister(unsigned long ulBase, void (*pfnHandler)(void));
+extern void I2SIntUnregister(unsigned long ulBase);
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif //  __I2S_H__
@@ -0,0 +1,77 @@
+//*****************************************************************************
+//
+// interrupt.h - Prototypes for the NVIC Interrupt Controller Driver.
+//
+// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __INTERRUPT_H__
+#define __INTERRUPT_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Macro to generate an interrupt priority mask based on the number of bits
+// of priority supported by the hardware.
+//
+//*****************************************************************************
+#define INT_PRIORITY_MASK       ((0xFF << (8 - NUM_PRIORITY_BITS)) & 0xFF)
+
+//*****************************************************************************
+//
+// Prototypes for the APIs.
+//
+//*****************************************************************************
+extern tBoolean IntMasterEnable(void);
+extern tBoolean IntMasterDisable(void);
+extern void IntRegister(unsigned long ulInterrupt, void (*pfnHandler)(void));
+extern void IntUnregister(unsigned long ulInterrupt);
+extern void IntPriorityGroupingSet(unsigned long ulBits);
+extern unsigned long IntPriorityGroupingGet(void);
+extern void IntPrioritySet(unsigned long ulInterrupt,
+                           unsigned char ucPriority);
+extern long IntPriorityGet(unsigned long ulInterrupt);
+extern void IntEnable(unsigned long ulInterrupt);
+extern void IntDisable(unsigned long ulInterrupt);
+extern void IntPendSet(unsigned long ulInterrupt);
+extern void IntPendClear(unsigned long ulInterrupt);
+extern void IntPriorityMaskSet(unsigned long ulPriorityMask);
+extern unsigned long IntPriorityMaskGet(void);
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __INTERRUPT_H__
@@ -0,0 +1,147 @@
+//*****************************************************************************
+//
+// mpu.h - Defines and Macros for the memory protection unit.
+//
+// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __MPU_H__
+#define __MPU_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Flags that can be passed to MPUEnable.
+//
+//*****************************************************************************
+#define MPU_CONFIG_PRIV_DEFAULT     4
+#define MPU_CONFIG_HARDFLT_NMI      2
+#define MPU_CONFIG_NONE             0
+
+//*****************************************************************************
+//
+// Flags for the region size to be passed to MPURegionSet.
+//
+//*****************************************************************************
+#define MPU_RGN_SIZE_32B            (4 << 1)
+#define MPU_RGN_SIZE_64B            (5 << 1)
+#define MPU_RGN_SIZE_128B           (6 << 1)
+#define MPU_RGN_SIZE_256B           (7 << 1)
+#define MPU_RGN_SIZE_512B           (8 << 1)
+
+#define MPU_RGN_SIZE_1K             (9 << 1)
+#define MPU_RGN_SIZE_2K             (10 << 1)
+#define MPU_RGN_SIZE_4K             (11 << 1)
+#define MPU_RGN_SIZE_8K             (12 << 1)
+#define MPU_RGN_SIZE_16K            (13 << 1)
+#define MPU_RGN_SIZE_32K            (14 << 1)
+#define MPU_RGN_SIZE_64K            (15 << 1)
+#define MPU_RGN_SIZE_128K           (16 << 1)
+#define MPU_RGN_SIZE_256K           (17 << 1)
+#define MPU_RGN_SIZE_512K           (18 << 1)
+
+#define MPU_RGN_SIZE_1M             (19 << 1)
+#define MPU_RGN_SIZE_2M             (20 << 1)
+#define MPU_RGN_SIZE_4M             (21 << 1)
+#define MPU_RGN_SIZE_8M             (22 << 1)
+#define MPU_RGN_SIZE_16M            (23 << 1)
+#define MPU_RGN_SIZE_32M            (24 << 1)
+#define MPU_RGN_SIZE_64M            (25 << 1)
+#define MPU_RGN_SIZE_128M           (26 << 1)
+#define MPU_RGN_SIZE_256M           (27 << 1)
+#define MPU_RGN_SIZE_512M           (28 << 1)
+
+#define MPU_RGN_SIZE_1G             (29 << 1)
+#define MPU_RGN_SIZE_2G             (30 << 1)
+#define MPU_RGN_SIZE_4G             (31 << 1)
+
+//*****************************************************************************
+//
+// Flags for the permissions to be passed to MPURegionSet.
+//
+//*****************************************************************************
+#define MPU_RGN_PERM_EXEC           0x00000000
+#define MPU_RGN_PERM_NOEXEC         0x10000000
+#define MPU_RGN_PERM_PRV_NO_USR_NO  0x00000000
+#define MPU_RGN_PERM_PRV_RW_USR_NO  0x01000000
+#define MPU_RGN_PERM_PRV_RW_USR_RO  0x02000000
+#define MPU_RGN_PERM_PRV_RW_USR_RW  0x03000000
+#define MPU_RGN_PERM_PRV_RO_USR_NO  0x05000000
+#define MPU_RGN_PERM_PRV_RO_USR_RO  0x06000000
+
+//*****************************************************************************
+//
+// Flags for the sub-region to be passed to MPURegionSet.
+//
+//*****************************************************************************
+#define MPU_SUB_RGN_DISABLE_0       0x00000100
+#define MPU_SUB_RGN_DISABLE_1       0x00000200
+#define MPU_SUB_RGN_DISABLE_2       0x00000400
+#define MPU_SUB_RGN_DISABLE_3       0x00000800
+#define MPU_SUB_RGN_DISABLE_4       0x00001000
+#define MPU_SUB_RGN_DISABLE_5       0x00002000
+#define MPU_SUB_RGN_DISABLE_6       0x00004000
+#define MPU_SUB_RGN_DISABLE_7       0x00008000
+
+//*****************************************************************************
+//
+// Flags to enable or disable a region, to be passed to MPURegionSet.
+//
+//*****************************************************************************
+#define MPU_RGN_ENABLE              1
+#define MPU_RGN_DISABLE             0
+
+//*****************************************************************************
+//
+// API Function prototypes
+//
+//*****************************************************************************
+extern void MPUEnable(unsigned long ulMPUConfig);
+extern void MPUDisable(void);
+extern unsigned long MPURegionCountGet(void);
+extern void MPURegionEnable(unsigned long ulRegion);
+extern void MPURegionDisable(unsigned long ulRegion);
+extern void MPURegionSet(unsigned long ulRegion, unsigned long ulAddr,
+                         unsigned long ulFlags);
+extern void MPURegionGet(unsigned long ulRegion, unsigned long *pulAddr,
+                         unsigned long *pulFlags);
+extern void MPUIntRegister(void (*pfnHandler)(void));
+extern void MPUIntUnregister(void);
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif //  __MPU_H__
@@ -0,0 +1,112 @@
+//*****************************************************************************
+//
+// qei.h - Prototypes for the Quadrature Encoder Driver.
+//
+// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __QEI_H__
+#define __QEI_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Values that can be passed to QEIConfigure as the ulConfig paramater.
+//
+//*****************************************************************************
+#define QEI_CONFIG_CAPTURE_A    0x00000000  // Count on ChA edges only
+#define QEI_CONFIG_CAPTURE_A_B  0x00000008  // Count on ChA and ChB edges
+#define QEI_CONFIG_NO_RESET     0x00000000  // Do not reset on index pulse
+#define QEI_CONFIG_RESET_IDX    0x00000010  // Reset position on index pulse
+#define QEI_CONFIG_QUADRATURE   0x00000000  // ChA and ChB are quadrature
+#define QEI_CONFIG_CLOCK_DIR    0x00000004  // ChA and ChB are clock and dir
+#define QEI_CONFIG_NO_SWAP      0x00000000  // Do not swap ChA and ChB
+#define QEI_CONFIG_SWAP         0x00000002  // Swap ChA and ChB
+
+//*****************************************************************************
+//
+// Values that can be passed to QEIVelocityConfigure as the ulPreDiv parameter.
+//
+//*****************************************************************************
+#define QEI_VELDIV_1            0x00000000  // Predivide by 1
+#define QEI_VELDIV_2            0x00000040  // Predivide by 2
+#define QEI_VELDIV_4            0x00000080  // Predivide by 4
+#define QEI_VELDIV_8            0x000000C0  // Predivide by 8
+#define QEI_VELDIV_16           0x00000100  // Predivide by 16
+#define QEI_VELDIV_32           0x00000140  // Predivide by 32
+#define QEI_VELDIV_64           0x00000180  // Predivide by 64
+#define QEI_VELDIV_128          0x000001C0  // Predivide by 128
+
+//*****************************************************************************
+//
+// Values that can be passed to QEIEnableInts, QEIDisableInts, and QEIClearInts
+// as the ulIntFlags parameter, and returned by QEIGetIntStatus.
+//
+//*****************************************************************************
+#define QEI_INTERROR            0x00000008  // Phase error detected
+#define QEI_INTDIR              0x00000004  // Direction change
+#define QEI_INTTIMER            0x00000002  // Velocity timer expired
+#define QEI_INTINDEX            0x00000001  // Index pulse detected
+
+//*****************************************************************************
+//
+// Prototypes for the APIs.
+//
+//*****************************************************************************
+extern void QEIEnable(unsigned long ulBase);
+extern void QEIDisable(unsigned long ulBase);
+extern void QEIConfigure(unsigned long ulBase, unsigned long ulConfig,
+                         unsigned long ulMaxPosition);
+extern unsigned long QEIPositionGet(unsigned long ulBase);
+extern void QEIPositionSet(unsigned long ulBase, unsigned long ulPosition);
+extern long QEIDirectionGet(unsigned long ulBase);
+extern tBoolean QEIErrorGet(unsigned long ulBase);
+extern void QEIVelocityEnable(unsigned long ulBase);
+extern void QEIVelocityDisable(unsigned long ulBase);
+extern void QEIVelocityConfigure(unsigned long ulBase, unsigned long ulPreDiv,
+                                 unsigned long ulPeriod);
+extern unsigned long QEIVelocityGet(unsigned long ulBase);
+extern void QEIIntRegister(unsigned long ulBase, void (*pfnHandler)(void));
+extern void QEIIntUnregister(unsigned long ulBase);
+extern void QEIIntEnable(unsigned long ulBase, unsigned long ulIntFlags);
+extern void QEIIntDisable(unsigned long ulBase, unsigned long ulIntFlags);
+extern unsigned long QEIIntStatus(unsigned long ulBase, tBoolean bMasked);
+extern void QEIIntClear(unsigned long ulBase, unsigned long ulIntFlags);
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __QEI_H__
@@ -0,0 +1,21 @@
+This project will build the Stellaris Peripheral Driver Library.
+
+-------------------------------------------------------------------------------
+
+Copyright (c) 2006-2010 Texas Instruments Incorporated.  All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 6459 of the Stellaris Peripheral Driver Library.
@@ -0,0 +1,125 @@
+//*****************************************************************************
+//
+// ssi.h - Prototypes for the Synchronous Serial Interface Driver.
+//
+// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __SSI_H__
+#define __SSI_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Values that can be passed to SSIIntEnable, SSIIntDisable, and SSIIntClear
+// as the ulIntFlags parameter, and returned by SSIIntStatus.
+//
+//*****************************************************************************
+#define SSI_TXFF                0x00000008  // TX FIFO half full or less
+#define SSI_RXFF                0x00000004  // RX FIFO half full or more
+#define SSI_RXTO                0x00000002  // RX timeout
+#define SSI_RXOR                0x00000001  // RX overrun
+
+//*****************************************************************************
+//
+// Values that can be passed to SSIConfigSetExpClk.
+//
+//*****************************************************************************
+#define SSI_FRF_MOTO_MODE_0     0x00000000  // Moto fmt, polarity 0, phase 0
+#define SSI_FRF_MOTO_MODE_1     0x00000002  // Moto fmt, polarity 0, phase 1
+#define SSI_FRF_MOTO_MODE_2     0x00000001  // Moto fmt, polarity 1, phase 0
+#define SSI_FRF_MOTO_MODE_3     0x00000003  // Moto fmt, polarity 1, phase 1
+#define SSI_FRF_TI              0x00000010  // TI frame format
+#define SSI_FRF_NMW             0x00000020  // National MicroWire frame format
+
+#define SSI_MODE_MASTER         0x00000000  // SSI master
+#define SSI_MODE_SLAVE          0x00000001  // SSI slave
+#define SSI_MODE_SLAVE_OD       0x00000002  // SSI slave with output disabled
+
+//*****************************************************************************
+//
+// Values that can be passed to SSIDMAEnable() and SSIDMADisable().
+//
+//*****************************************************************************
+#define SSI_DMA_TX              0x00000002  // Enable DMA for transmit
+#define SSI_DMA_RX              0x00000001  // Enable DMA for receive
+
+//*****************************************************************************
+//
+// Prototypes for the APIs.
+//
+//*****************************************************************************
+extern void SSIConfigSetExpClk(unsigned long ulBase, unsigned long ulSSIClk,
+                               unsigned long ulProtocol, unsigned long ulMode,
+                               unsigned long ulBitRate,
+                               unsigned long ulDataWidth);
+extern void SSIDataGet(unsigned long ulBase, unsigned long *pulData);
+extern long SSIDataGetNonBlocking(unsigned long ulBase,
+                                  unsigned long *pulData);
+extern void SSIDataPut(unsigned long ulBase, unsigned long ulData);
+extern long SSIDataPutNonBlocking(unsigned long ulBase, unsigned long ulData);
+extern void SSIDisable(unsigned long ulBase);
+extern void SSIEnable(unsigned long ulBase);
+extern void SSIIntClear(unsigned long ulBase, unsigned long ulIntFlags);
+extern void SSIIntDisable(unsigned long ulBase, unsigned long ulIntFlags);
+extern void SSIIntEnable(unsigned long ulBase, unsigned long ulIntFlags);
+extern void SSIIntRegister(unsigned long ulBase, void(*pfnHandler)(void));
+extern unsigned long SSIIntStatus(unsigned long ulBase, tBoolean bMasked);
+extern void SSIIntUnregister(unsigned long ulBase);
+extern void SSIDMAEnable(unsigned long ulBase, unsigned long ulDMAFlags);
+extern void SSIDMADisable(unsigned long ulBase, unsigned long ulDMAFlags);
+extern tBoolean SSIBusy(unsigned long ulBase);
+
+//*****************************************************************************
+//
+// Several SSI APIs have been renamed, with the original function name being
+// deprecated.  These defines provide backward compatibility.
+//
+//*****************************************************************************
+#ifndef DEPRECATED
+#include "driverlib/sysctl.h"
+#define SSIConfig(a, b, c, d, e)                            \
+        SSIConfigSetExpClk(a, SysCtlClockGet(), b, c, d, e)
+#define SSIDataNonBlockingGet(a, b) \
+        SSIDataGetNonBlocking(a, b)
+#define SSIDataNonBlockingPut(a, b) \
+        SSIDataPutNonBlocking(a, b)
+#endif
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __SSI_H__
@@ -0,0 +1,63 @@
+//*****************************************************************************
+//
+// systick.h - Prototypes for the SysTick driver.
+//
+// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __SYSTICK_H__
+#define __SYSTICK_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Prototypes for the APIs.
+//
+//*****************************************************************************
+extern void SysTickEnable(void);
+extern void SysTickDisable(void);
+extern void SysTickIntRegister(void (*pfnHandler)(void));
+extern void SysTickIntUnregister(void);
+extern void SysTickIntEnable(void);
+extern void SysTickIntDisable(void);
+extern void SysTickPeriodSet(unsigned long ulPeriod);
+extern unsigned long SysTickPeriodGet(void);
+extern unsigned long SysTickValueGet(void);
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __SYSTICK_H__
@@ -0,0 +1,165 @@
+//*****************************************************************************
+//
+// timer.h - Prototypes for the timer module
+//
+// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __TIMER_H__
+#define __TIMER_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Values that can be passed to TimerConfigure as the ulConfig parameter.
+//
+//*****************************************************************************
+#define TIMER_CFG_32_BIT_OS     0x00000001  // 32-bit one-shot timer
+#define TIMER_CFG_32_BIT_OS_UP  0x00000011  // 32-bit one-shot up-count timer
+#define TIMER_CFG_32_BIT_PER    0x00000002  // 32-bit periodic timer
+#define TIMER_CFG_32_BIT_PER_UP 0x00000012  // 32-bit periodic up-count timer
+#define TIMER_CFG_32_RTC        0x01000000  // 32-bit RTC timer
+#define TIMER_CFG_16_BIT_PAIR   0x04000000  // Two 16-bit timers
+#define TIMER_CFG_A_ONE_SHOT    0x00000001  // Timer A one-shot timer
+#define TIMER_CFG_A_ONE_SHOT_UP 0x00000011  // Timer A one-shot up-count timer
+#define TIMER_CFG_A_PERIODIC    0x00000002  // Timer A periodic timer
+#define TIMER_CFG_A_PERIODIC_UP 0x00000012  // Timer A periodic up-count timer
+#define TIMER_CFG_A_CAP_COUNT   0x00000003  // Timer A event counter
+#define TIMER_CFG_A_CAP_TIME    0x00000007  // Timer A event timer
+#define TIMER_CFG_A_PWM         0x0000000A  // Timer A PWM output
+#define TIMER_CFG_B_ONE_SHOT    0x00000100  // Timer B one-shot timer
+#define TIMER_CFG_B_ONE_SHOT_UP 0x00001100  // Timer B one-shot up-count timer
+#define TIMER_CFG_B_PERIODIC    0x00000200  // Timer B periodic timer
+#define TIMER_CFG_B_PERIODIC_UP 0x00001200  // Timer B periodic up-count timer
+#define TIMER_CFG_B_CAP_COUNT   0x00000300  // Timer B event counter
+#define TIMER_CFG_B_CAP_TIME    0x00000700  // Timer B event timer
+#define TIMER_CFG_B_PWM         0x00000A00  // Timer B PWM output
+
+//*****************************************************************************
+//
+// Values that can be passed to TimerIntEnable, TimerIntDisable, and
+// TimerIntClear as the ulIntFlags parameter, and returned from TimerIntStatus.
+//
+//*****************************************************************************
+#define TIMER_TIMB_MATCH        0x00000800  // TimerB match interrupt
+#define TIMER_CAPB_EVENT        0x00000400  // CaptureB event interrupt
+#define TIMER_CAPB_MATCH        0x00000200  // CaptureB match interrupt
+#define TIMER_TIMB_TIMEOUT      0x00000100  // TimerB time out interrupt
+#define TIMER_TIMA_MATCH        0x00000010  // TimerA match interrupt
+#define TIMER_RTC_MATCH         0x00000008  // RTC interrupt mask
+#define TIMER_CAPA_EVENT        0x00000004  // CaptureA event interrupt
+#define TIMER_CAPA_MATCH        0x00000002  // CaptureA match interrupt
+#define TIMER_TIMA_TIMEOUT      0x00000001  // TimerA time out interrupt
+
+//*****************************************************************************
+//
+// Values that can be passed to TimerControlEvent as the ulEvent parameter.
+//
+//*****************************************************************************
+#define TIMER_EVENT_POS_EDGE    0x00000000  // Count positive edges
+#define TIMER_EVENT_NEG_EDGE    0x00000404  // Count negative edges
+#define TIMER_EVENT_BOTH_EDGES  0x00000C0C  // Count both edges
+
+//*****************************************************************************
+//
+// Values that can be passed to most of the timer APIs as the ulTimer
+// parameter.
+//
+//*****************************************************************************
+#define TIMER_A                 0x000000ff  // Timer A
+#define TIMER_B                 0x0000ff00  // Timer B
+#define TIMER_BOTH              0x0000ffff  // Timer Both
+
+//*****************************************************************************
+//
+// Prototypes for the APIs.
+//
+//*****************************************************************************
+extern void TimerEnable(unsigned long ulBase, unsigned long ulTimer);
+extern void TimerDisable(unsigned long ulBase, unsigned long ulTimer);
+extern void TimerConfigure(unsigned long ulBase, unsigned long ulConfig);
+extern void TimerControlLevel(unsigned long ulBase, unsigned long ulTimer,
+                              tBoolean bInvert);
+extern void TimerControlTrigger(unsigned long ulBase, unsigned long ulTimer,
+                                tBoolean bEnable);
+extern void TimerControlEvent(unsigned long ulBase, unsigned long ulTimer,
+                              unsigned long ulEvent);
+extern void TimerControlStall(unsigned long ulBase, unsigned long ulTimer,
+                              tBoolean bStall);
+extern void TimerControlWaitOnTrigger(unsigned long ulBase,
+                                      unsigned long ulTimer,
+                                      tBoolean bWait);
+extern void TimerRTCEnable(unsigned long ulBase);
+extern void TimerRTCDisable(unsigned long ulBase);
+extern void TimerPrescaleSet(unsigned long ulBase, unsigned long ulTimer,
+                             unsigned long ulValue);
+extern unsigned long TimerPrescaleGet(unsigned long ulBase,
+                                      unsigned long ulTimer);
+extern void TimerPrescaleMatchSet(unsigned long ulBase, unsigned long ulTimer,
+                                  unsigned long ulValue);
+extern unsigned long TimerPrescaleMatchGet(unsigned long ulBase,
+                                           unsigned long ulTimer);
+extern void TimerLoadSet(unsigned long ulBase, unsigned long ulTimer,
+                         unsigned long ulValue);
+extern unsigned long TimerLoadGet(unsigned long ulBase, unsigned long ulTimer);
+extern unsigned long TimerValueGet(unsigned long ulBase,
+                                   unsigned long ulTimer);
+extern void TimerMatchSet(unsigned long ulBase, unsigned long ulTimer,
+                          unsigned long ulValue);
+extern unsigned long TimerMatchGet(unsigned long ulBase,
+                                   unsigned long ulTimer);
+extern void TimerIntRegister(unsigned long ulBase, unsigned long ulTimer,
+                             void (*pfnHandler)(void));
+extern void TimerIntUnregister(unsigned long ulBase, unsigned long ulTimer);
+extern void TimerIntEnable(unsigned long ulBase, unsigned long ulIntFlags);
+extern void TimerIntDisable(unsigned long ulBase, unsigned long ulIntFlags);
+extern unsigned long TimerIntStatus(unsigned long ulBase, tBoolean bMasked);
+extern void TimerIntClear(unsigned long ulBase, unsigned long ulIntFlags);
+
+//*****************************************************************************
+//
+// TimerQuiesce() has been deprecated.  SysCtlPeripheralReset() should be used
+// instead to return the timer to its reset state.
+//
+//*****************************************************************************
+#ifndef DEPRECATED
+extern void TimerQuiesce(unsigned long ulBase);
+#endif
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __TIMER_H__
@@ -0,0 +1,71 @@
+//*****************************************************************************
+//
+// watchdog.h - Prototypes for the Watchdog Timer API
+//
+// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Peripheral Driver Library.
+//
+//*****************************************************************************
+
+#ifndef __WATCHDOG_H__
+#define __WATCHDOG_H__
+
+//*****************************************************************************
+//
+// If building with a C++ compiler, make all of the definitions in this header
+// have a C binding.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+//*****************************************************************************
+//
+// Prototypes for the APIs.
+//
+//*****************************************************************************
+extern tBoolean WatchdogRunning(unsigned long ulBase);
+extern void WatchdogEnable(unsigned long ulBase);
+extern void WatchdogResetEnable(unsigned long ulBase);
+extern void WatchdogResetDisable(unsigned long ulBase);
+extern void WatchdogLock(unsigned long ulBase);
+extern void WatchdogUnlock(unsigned long ulBase);
+extern tBoolean WatchdogLockState(unsigned long ulBase);
+extern void WatchdogReloadSet(unsigned long ulBase, unsigned long ulLoadVal);
+extern unsigned long WatchdogReloadGet(unsigned long ulBase);
+extern unsigned long WatchdogValueGet(unsigned long ulBase);
+extern void WatchdogIntRegister(unsigned long ulBase, void(*pfnHandler)(void));
+extern void WatchdogIntUnregister(unsigned long ulBase);
+extern void WatchdogIntEnable(unsigned long ulBase);
+extern unsigned long WatchdogIntStatus(unsigned long ulBase, tBoolean bMasked);
+extern void WatchdogIntClear(unsigned long ulBase);
+extern void WatchdogStallEnable(unsigned long ulBase);
+extern void WatchdogStallDisable(unsigned long ulBase);
+
+//*****************************************************************************
+//
+// Mark the end of the C bindings section for C++ compilers.
+//
+//*****************************************************************************
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __WATCHDOG_H__
@@ -0,0 +1,26 @@
+<!--
+Configuration file for Code Red project inc
+
+Copyright (c) 2008-2010 Texas Instruments Incorporated.  All rights reserved.
+Software License Agreement
+
+Texas Instruments (TI) is supplying this software for use solely and
+exclusively on TI's microcontroller products. The software is owned by
+TI and/or its suppliers, and is protected under applicable copyright
+laws. You may not combine this software with "viral" open-source
+software in order to form a larger program.
+
+THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, FOR ANY REASON WHATSOEVER.
+
+This is part of revision 6459 of the Stellaris Firmware Development Package.
+-->
+
+<project>
+  <import src=".">
+  </import>
+</project>
@@ -0,0 +1,141 @@
+//*****************************************************************************
+//
+// hw_ints.h - Macros that define the interrupt assignment on Stellaris.
+//
+// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Firmware Development Package.
+//
+//*****************************************************************************
+
+#ifndef __HW_INTS_H__
+#define __HW_INTS_H__
+
+//*****************************************************************************
+//
+// The following are defines for the fault assignments.
+//
+//*****************************************************************************
+#define FAULT_NMI               2           // NMI fault
+#define FAULT_HARD              3           // Hard fault
+#define FAULT_MPU               4           // MPU fault
+#define FAULT_BUS               5           // Bus fault
+#define FAULT_USAGE             6           // Usage fault
+#define FAULT_SVCALL            11          // SVCall
+#define FAULT_DEBUG             12          // Debug monitor
+#define FAULT_PENDSV            14          // PendSV
+#define FAULT_SYSTICK           15          // System Tick
+
+//*****************************************************************************
+//
+// The following are defines for the interrupt assignments.
+//
+//*****************************************************************************
+#define INT_GPIOA               16          // GPIO Port A
+#define INT_GPIOB               17          // GPIO Port B
+#define INT_GPIOC               18          // GPIO Port C
+#define INT_GPIOD               19          // GPIO Port D
+#define INT_GPIOE               20          // GPIO Port E
+#define INT_UART0               21          // UART0 Rx and Tx
+#define INT_UART1               22          // UART1 Rx and Tx
+#define INT_SSI0                23          // SSI0 Rx and Tx
+#define INT_I2C0                24          // I2C0 Master and Slave
+#define INT_PWM_FAULT           25          // PWM Fault
+#define INT_PWM0                26          // PWM Generator 0
+#define INT_PWM1                27          // PWM Generator 1
+#define INT_PWM2                28          // PWM Generator 2
+#define INT_QEI0                29          // Quadrature Encoder 0
+#define INT_ADC0SS0             30          // ADC0 Sequence 0
+#define INT_ADC0SS1             31          // ADC0 Sequence 1
+#define INT_ADC0SS2             32          // ADC0 Sequence 2
+#define INT_ADC0SS3             33          // ADC0 Sequence 3
+#define INT_WATCHDOG            34          // Watchdog timer
+#define INT_TIMER0A             35          // Timer 0 subtimer A
+#define INT_TIMER0B             36          // Timer 0 subtimer B
+#define INT_TIMER1A             37          // Timer 1 subtimer A
+#define INT_TIMER1B             38          // Timer 1 subtimer B
+#define INT_TIMER2A             39          // Timer 2 subtimer A
+#define INT_TIMER2B             40          // Timer 2 subtimer B
+#define INT_COMP0               41          // Analog Comparator 0
+#define INT_COMP1               42          // Analog Comparator 1
+#define INT_COMP2               43          // Analog Comparator 2
+#define INT_SYSCTL              44          // System Control (PLL, OSC, BO)
+#define INT_FLASH               45          // FLASH Control
+#define INT_GPIOF               46          // GPIO Port F
+#define INT_GPIOG               47          // GPIO Port G
+#define INT_GPIOH               48          // GPIO Port H
+#define INT_UART2               49          // UART2 Rx and Tx
+#define INT_SSI1                50          // SSI1 Rx and Tx
+#define INT_TIMER3A             51          // Timer 3 subtimer A
+#define INT_TIMER3B             52          // Timer 3 subtimer B
+#define INT_I2C1                53          // I2C1 Master and Slave
+#define INT_QEI1                54          // Quadrature Encoder 1
+#define INT_CAN0                55          // CAN0
+#define INT_CAN1                56          // CAN1
+#define INT_CAN2                57          // CAN2
+#define INT_ETH                 58          // Ethernet
+#define INT_HIBERNATE           59          // Hibernation module
+#define INT_USB0                60          // USB 0 Controller
+#define INT_PWM3                61          // PWM Generator 3
+#define INT_UDMA                62          // uDMA controller
+#define INT_UDMAERR             63          // uDMA Error
+#define INT_ADC1SS0             64          // ADC1 Sequence 0
+#define INT_ADC1SS1             65          // ADC1 Sequence 1
+#define INT_ADC1SS2             66          // ADC1 Sequence 2
+#define INT_ADC1SS3             67          // ADC1 Sequence 3
+#define INT_I2S0                68          // I2S0
+#define INT_EPI0                69          // EPI0
+#define INT_GPIOJ               70          // GPIO Port J
+
+//*****************************************************************************
+//
+// The following are defines for the total number of interrupts.
+//
+//*****************************************************************************
+#define NUM_INTERRUPTS          71
+
+//*****************************************************************************
+//
+// The following are defines for the total number of priority levels.
+//
+//*****************************************************************************
+#define NUM_PRIORITY            8
+#define NUM_PRIORITY_BITS       3
+
+//*****************************************************************************
+//
+// The following definitions are deprecated.
+//
+//*****************************************************************************
+#ifndef DEPRECATED
+
+//*****************************************************************************
+//
+// The following are deprecated defines for the interrupt assignments.
+//
+//*****************************************************************************
+#define INT_SSI                 23          // SSI Rx and Tx
+#define INT_I2C                 24          // I2C Master and Slave
+#define INT_QEI                 29          // Quadrature Encoder
+#define INT_ADC0                30          // ADC Sequence 0
+#define INT_ADC1                31          // ADC Sequence 1
+#define INT_ADC2                32          // ADC Sequence 2
+#define INT_ADC3                33          // ADC Sequence 3
+
+#endif
+
+#endif // __HW_INTS_H__
@@ -0,0 +1,115 @@
+//*****************************************************************************
+//
+// hw_memmap.h - Macros defining the memory map of Stellaris.
+//
+// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Firmware Development Package.
+//
+//*****************************************************************************
+
+#ifndef __HW_MEMMAP_H__
+#define __HW_MEMMAP_H__
+
+//*****************************************************************************
+//
+// The following are defines for the base address of the memories and
+// peripherals.
+//
+//*****************************************************************************
+#define FLASH_BASE              0x00000000  // FLASH memory
+#define SRAM_BASE               0x20000000  // SRAM memory
+#define WATCHDOG0_BASE          0x40000000  // Watchdog0
+#define WATCHDOG1_BASE          0x40001000  // Watchdog1
+#define GPIO_PORTA_BASE         0x40004000  // GPIO Port A
+#define GPIO_PORTB_BASE         0x40005000  // GPIO Port B
+#define GPIO_PORTC_BASE         0x40006000  // GPIO Port C
+#define GPIO_PORTD_BASE         0x40007000  // GPIO Port D
+#define SSI0_BASE               0x40008000  // SSI0
+#define SSI1_BASE               0x40009000  // SSI1
+#define UART0_BASE              0x4000C000  // UART0
+#define UART1_BASE              0x4000D000  // UART1
+#define UART2_BASE              0x4000E000  // UART2
+#define I2C0_MASTER_BASE        0x40020000  // I2C0 Master
+#define I2C0_SLAVE_BASE         0x40020800  // I2C0 Slave
+#define I2C1_MASTER_BASE        0x40021000  // I2C1 Master
+#define I2C1_SLAVE_BASE         0x40021800  // I2C1 Slave
+#define GPIO_PORTE_BASE         0x40024000  // GPIO Port E
+#define GPIO_PORTF_BASE         0x40025000  // GPIO Port F
+#define GPIO_PORTG_BASE         0x40026000  // GPIO Port G
+#define GPIO_PORTH_BASE         0x40027000  // GPIO Port H
+#define PWM_BASE                0x40028000  // PWM
+#define QEI0_BASE               0x4002C000  // QEI0
+#define QEI1_BASE               0x4002D000  // QEI1
+#define TIMER0_BASE             0x40030000  // Timer0
+#define TIMER1_BASE             0x40031000  // Timer1
+#define TIMER2_BASE             0x40032000  // Timer2
+#define TIMER3_BASE             0x40033000  // Timer3
+#define ADC0_BASE               0x40038000  // ADC0
+#define ADC1_BASE               0x40039000  // ADC1
+#define COMP_BASE               0x4003C000  // Analog comparators
+#define GPIO_PORTJ_BASE         0x4003D000  // GPIO Port J
+#define CAN0_BASE               0x40040000  // CAN0
+#define CAN1_BASE               0x40041000  // CAN1
+#define CAN2_BASE               0x40042000  // CAN2
+#define ETH_BASE                0x40048000  // Ethernet
+#define MAC_BASE                0x40048000  // Ethernet
+#define USB0_BASE               0x40050000  // USB 0 Controller
+#define I2S0_BASE               0x40054000  // I2S0
+#define GPIO_PORTA_AHB_BASE     0x40058000  // GPIO Port A (high speed)
+#define GPIO_PORTB_AHB_BASE     0x40059000  // GPIO Port B (high speed)
+#define GPIO_PORTC_AHB_BASE     0x4005A000  // GPIO Port C (high speed)
+#define GPIO_PORTD_AHB_BASE     0x4005B000  // GPIO Port D (high speed)
+#define GPIO_PORTE_AHB_BASE     0x4005C000  // GPIO Port E (high speed)
+#define GPIO_PORTF_AHB_BASE     0x4005D000  // GPIO Port F (high speed)
+#define GPIO_PORTG_AHB_BASE     0x4005E000  // GPIO Port G (high speed)
+#define GPIO_PORTH_AHB_BASE     0x4005F000  // GPIO Port H (high speed)
+#define GPIO_PORTJ_AHB_BASE     0x40060000  // GPIO Port J (high speed)
+#define EPI0_BASE               0x400D0000  // EPI0
+#define HIB_BASE                0x400FC000  // Hibernation Module
+#define FLASH_CTRL_BASE         0x400FD000  // FLASH Controller
+#define SYSCTL_BASE             0x400FE000  // System Control
+#define UDMA_BASE               0x400FF000  // uDMA Controller
+#define ITM_BASE                0xE0000000  // Instrumentation Trace Macrocell
+#define DWT_BASE                0xE0001000  // Data Watchpoint and Trace
+#define FPB_BASE                0xE0002000  // FLASH Patch and Breakpoint
+#define NVIC_BASE               0xE000E000  // Nested Vectored Interrupt Ctrl
+#define TPIU_BASE               0xE0040000  // Trace Port Interface Unit
+
+//*****************************************************************************
+//
+// The following definitions are deprecated.
+//
+//*****************************************************************************
+#ifndef DEPRECATED
+
+//*****************************************************************************
+//
+// The following are deprecated defines for the base address of the memories
+// and peripherals.
+//
+//*****************************************************************************
+#define WATCHDOG_BASE           0x40000000  // Watchdog
+#define SSI_BASE                0x40008000  // SSI
+#define I2C_MASTER_BASE         0x40020000  // I2C Master
+#define I2C_SLAVE_BASE          0x40020800  // I2C Slave
+#define QEI_BASE                0x4002C000  // QEI
+#define ADC_BASE                0x40038000  // ADC
+
+#endif
+
+#endif // __HW_MEMMAP_H__
@@ -0,0 +1,179 @@
+//*****************************************************************************
+//
+// hw_types.h - Common types and macros.
+//
+// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Firmware Development Package.
+//
+//*****************************************************************************
+
+#ifndef __HW_TYPES_H__
+#define __HW_TYPES_H__
+
+//*****************************************************************************
+//
+// Define a boolean type, and values for true and false.
+//
+//*****************************************************************************
+typedef unsigned char tBoolean;
+
+#ifndef true
+#define true 1
+#endif
+
+#ifndef false
+#define false 0
+#endif
+
+//*****************************************************************************
+//
+// Macros for hardware access, both direct and via the bit-band region.
+//
+//*****************************************************************************
+#define HWREG(x)                                                              \
+        (*((volatile unsigned long *)(x)))
+#define HWREGH(x)                                                             \
+        (*((volatile unsigned short *)(x)))
+#define HWREGB(x)                                                             \
+        (*((volatile unsigned char *)(x)))
+#define HWREGBITW(x, b)                                                       \
+        HWREG(((unsigned long)(x) & 0xF0000000) | 0x02000000 |                \
+              (((unsigned long)(x) & 0x000FFFFF) << 5) | ((b) << 2))
+#define HWREGBITH(x, b)                                                       \
+        HWREGH(((unsigned long)(x) & 0xF0000000) | 0x02000000 |               \
+               (((unsigned long)(x) & 0x000FFFFF) << 5) | ((b) << 2))
+#define HWREGBITB(x, b)                                                       \
+        HWREGB(((unsigned long)(x) & 0xF0000000) | 0x02000000 |               \
+               (((unsigned long)(x) & 0x000FFFFF) << 5) | ((b) << 2))
+
+//*****************************************************************************
+//
+// Helper Macros for determining silicon revisions, etc.
+//
+// These macros will be used by Driverlib at "run-time" to create necessary
+// conditional code blocks that will allow a single version of the Driverlib
+// "binary" code to support multiple(all) Stellaris silicon revisions.
+//
+// It is expected that these macros will be used inside of a standard 'C'
+// conditional block of code, e.g.
+//
+//     if(CLASS_IS_SANDSTORM)
+//     {
+//         do some Sandstorm-class specific code here.
+//     }
+//
+// By default, these macros will be defined as run-time checks of the
+// appropriate register(s) to allow creation of run-time conditional code
+// blocks for a common DriverLib across the entire Stellaris family.
+//
+// However, if code-space optimization is required, these macros can be "hard-
+// coded" for a specific version of Stellaris silicon.  Many compilers will
+// then detect the "hard-coded" conditionals, and appropriately optimize the
+// code blocks, eliminating any "unreachable" code.  This would result in
+// a smaller Driverlib, thus producing a smaller final application size, but
+// at the cost of limiting the Driverlib binary to a specific Stellaris
+// silicon revision.
+//
+//*****************************************************************************
+#ifndef CLASS_IS_SANDSTORM
+#define CLASS_IS_SANDSTORM                                                    \
+        (((HWREG(SYSCTL_DID0) & SYSCTL_DID0_VER_M) == SYSCTL_DID0_VER_0) ||   \
+         ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_VER_M | SYSCTL_DID0_CLASS_M)) == \
+          (SYSCTL_DID0_VER_1 | SYSCTL_DID0_CLASS_SANDSTORM)))
+#endif
+
+#ifndef CLASS_IS_FURY
+#define CLASS_IS_FURY                                                        \
+        ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_VER_M | SYSCTL_DID0_CLASS_M)) == \
+         (SYSCTL_DID0_VER_1 | SYSCTL_DID0_CLASS_FURY))
+#endif
+
+#ifndef CLASS_IS_DUSTDEVIL
+#define CLASS_IS_DUSTDEVIL                                                   \
+        ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_VER_M | SYSCTL_DID0_CLASS_M)) == \
+         (SYSCTL_DID0_VER_1 | SYSCTL_DID0_CLASS_DUSTDEVIL))
+#endif
+
+#ifndef CLASS_IS_TEMPEST
+#define CLASS_IS_TEMPEST                                                     \
+        ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_VER_M | SYSCTL_DID0_CLASS_M)) == \
+         (SYSCTL_DID0_VER_1 | SYSCTL_DID0_CLASS_TEMPEST))
+#endif
+
+#ifndef REVISION_IS_A0
+#define REVISION_IS_A0                                                     \
+        ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \
+         (SYSCTL_DID0_MAJ_REVA | SYSCTL_DID0_MIN_0))
+#endif
+
+#ifndef REVISION_IS_A1
+#define REVISION_IS_A1                                                     \
+        ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \
+         (SYSCTL_DID0_MAJ_REVA | SYSCTL_DID0_MIN_0))
+#endif
+
+#ifndef REVISION_IS_A2
+#define REVISION_IS_A2                                                     \
+        ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \
+         (SYSCTL_DID0_MAJ_REVA | SYSCTL_DID0_MIN_2))
+#endif
+
+#ifndef REVISION_IS_B0
+#define REVISION_IS_B0                                                     \
+        ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \
+         (SYSCTL_DID0_MAJ_REVB | SYSCTL_DID0_MIN_0))
+#endif
+
+#ifndef REVISION_IS_B1
+#define REVISION_IS_B1                                                     \
+        ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \
+         (SYSCTL_DID0_MAJ_REVB | SYSCTL_DID0_MIN_1))
+#endif
+
+#ifndef REVISION_IS_C0
+#define REVISION_IS_C0                                                     \
+        ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \
+         (SYSCTL_DID0_MAJ_REVC | SYSCTL_DID0_MIN_0))
+#endif
+
+#ifndef REVISION_IS_C1
+#define REVISION_IS_C1                                                     \
+        ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \
+         (SYSCTL_DID0_MAJ_REVC | SYSCTL_DID0_MIN_1))
+#endif
+
+#ifndef REVISION_IS_C2
+#define REVISION_IS_C2                                                     \
+        ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \
+         (SYSCTL_DID0_MAJ_REVC | SYSCTL_DID0_MIN_2))
+#endif
+
+//*****************************************************************************
+//
+// Deprecated silicon class and revision detection macros.
+//
+//*****************************************************************************
+#ifndef DEPRECATED
+#define DEVICE_IS_SANDSTORM     CLASS_IS_SANDSTORM
+#define DEVICE_IS_FURY          CLASS_IS_FURY
+#define DEVICE_IS_REVA2         REVISION_IS_A2
+#define DEVICE_IS_REVC1         REVISION_IS_C1
+#define DEVICE_IS_REVC2         REVISION_IS_C2
+#endif
+
+#endif // __HW_TYPES_H__
@@ -0,0 +1,175 @@
+//*****************************************************************************
+//
+// hw_watchdog.h - Macros used when accessing the Watchdog Timer hardware.
+//
+// Copyright (c) 2005-2010 Texas Instruments Incorporated.  All rights reserved.
+// Software License Agreement
+// 
+// Texas Instruments (TI) is supplying this software for use solely and
+// exclusively on TI's microcontroller products. The software is owned by
+// TI and/or its suppliers, and is protected under applicable copyright
+// laws. You may not combine this software with "viral" open-source
+// software in order to form a larger program.
+// 
+// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
+// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
+// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
+// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
+// DAMAGES, FOR ANY REASON WHATSOEVER.
+// 
+// This is part of revision 6459 of the Stellaris Firmware Development Package.
+//
+//*****************************************************************************
+
+#ifndef __HW_WATCHDOG_H__
+#define __HW_WATCHDOG_H__
+
+//*****************************************************************************
+//
+// The following are defines for the Watchdog Timer register offsets.
+//
+//*****************************************************************************
+#define WDT_O_LOAD              0x00000000  // Watchdog Load
+#define WDT_O_VALUE             0x00000004  // Watchdog Value
+#define WDT_O_CTL               0x00000008  // Watchdog Control
+#define WDT_O_ICR               0x0000000C  // Watchdog Interrupt Clear
+#define WDT_O_RIS               0x00000010  // Watchdog Raw Interrupt Status
+#define WDT_O_MIS               0x00000014  // Watchdog Masked Interrupt Status
+#define WDT_O_TEST              0x00000418  // Watchdog Test
+#define WDT_O_LOCK              0x00000C00  // Watchdog Lock
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the WDT_O_LOAD register.
+//
+//*****************************************************************************
+#define WDT_LOAD_M              0xFFFFFFFF  // Watchdog Load Value
+#define WDT_LOAD_S              0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the WDT_O_VALUE register.
+//
+//*****************************************************************************
+#define WDT_VALUE_M             0xFFFFFFFF  // Watchdog Value
+#define WDT_VALUE_S             0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the WDT_O_CTL register.
+//
+//*****************************************************************************
+#define WDT_CTL_WRC             0x80000000  // Write Complete
+#define WDT_CTL_RESEN           0x00000002  // Watchdog Reset Enable
+#define WDT_CTL_INTEN           0x00000001  // Watchdog Interrupt Enable
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the WDT_O_ICR register.
+//
+//*****************************************************************************
+#define WDT_ICR_M               0xFFFFFFFF  // Watchdog Interrupt Clear
+#define WDT_ICR_S               0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the WDT_O_RIS register.
+//
+//*****************************************************************************
+#define WDT_RIS_WDTRIS          0x00000001  // Watchdog Raw Interrupt Status
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the WDT_O_MIS register.
+//
+//*****************************************************************************
+#define WDT_MIS_WDTMIS          0x00000001  // Watchdog Masked Interrupt Status
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the WDT_O_TEST register.
+//
+//*****************************************************************************
+#define WDT_TEST_STALL          0x00000100  // Watchdog Stall Enable
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the WDT_O_LOCK register.
+//
+//*****************************************************************************
+#define WDT_LOCK_M              0xFFFFFFFF  // Watchdog Lock
+#define WDT_LOCK_UNLOCKED       0x00000000  // Unlocked
+#define WDT_LOCK_LOCKED         0x00000001  // Locked
+#define WDT_LOCK_UNLOCK         0x1ACCE551  // Unlocks the watchdog timer
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the WDT_ISR, WDT_RIS, and
+// WDT_MIS registers.
+//
+//*****************************************************************************
+#define WDT_INT_TIMEOUT         0x00000001  // Watchdog timer expired
+
+//*****************************************************************************
+//
+// The following definitions are deprecated.
+//
+//*****************************************************************************
+#ifndef DEPRECATED
+
+//*****************************************************************************
+//
+// The following are deprecated defines for the Watchdog Timer register
+// offsets.
+//
+//*****************************************************************************
+#define WDT_O_PeriphID4         0x00000FD0
+#define WDT_O_PeriphID5         0x00000FD4
+#define WDT_O_PeriphID6         0x00000FD8
+#define WDT_O_PeriphID7         0x00000FDC
+#define WDT_O_PeriphID0         0x00000FE0
+#define WDT_O_PeriphID1         0x00000FE4
+#define WDT_O_PeriphID2         0x00000FE8
+#define WDT_O_PeriphID3         0x00000FEC
+#define WDT_O_PCellID0          0x00000FF0
+#define WDT_O_PCellID1          0x00000FF4
+#define WDT_O_PCellID2          0x00000FF8
+#define WDT_O_PCellID3          0x00000FFC
+
+//*****************************************************************************
+//
+// The following are deprecated defines for the bit fields in the WDT_O_TEST
+// register.
+//
+//*****************************************************************************
+#define WDT_TEST_STALL_EN       0x00000100  // Watchdog stall enable
+
+//*****************************************************************************
+//
+// The following are deprecated defines for the reset values for the WDT
+// registers.
+//
+//*****************************************************************************
+#define WDT_RV_VALUE            0xFFFFFFFF  // Current value register
+#define WDT_RV_LOAD             0xFFFFFFFF  // Load register
+#define WDT_RV_PCellID1         0x000000F0
+#define WDT_RV_PCellID3         0x000000B1
+#define WDT_RV_PeriphID1        0x00000018
+#define WDT_RV_PeriphID2        0x00000018
+#define WDT_RV_PCellID0         0x0000000D
+#define WDT_RV_PCellID2         0x00000005
+#define WDT_RV_PeriphID0        0x00000005
+#define WDT_RV_PeriphID3        0x00000001
+#define WDT_RV_PeriphID5        0x00000000
+#define WDT_RV_RIS              0x00000000  // Raw interrupt status register
+#define WDT_RV_CTL              0x00000000  // Control register
+#define WDT_RV_PeriphID4        0x00000000
+#define WDT_RV_PeriphID6        0x00000000
+#define WDT_RV_PeriphID7        0x00000000
+#define WDT_RV_LOCK             0x00000000  // Lock register
+#define WDT_RV_MIS              0x00000000  // Masked interrupt status register
+
+#endif
+
+#endif // __HW_WATCHDOG_H__
@@ -0,0 +1,19 @@
+import rtconfig
+Import('RTT_ROOT')
+from building import *
+
+src_bsp = ['application.c', 'startup.c', 'board.c']
+
+src_drv = []
+if GetDepend('RT_USING_DFS'):
+	src_drv += ['sdcard.c']
+
+if GetDepend('RT_USING_LWIP'):
+
+	src_drv += ['luminaryif.c']
+
+src	= File(src_bsp + src_drv)
+CPPPATH = [RTT_ROOT + '/bsp/lm3s']
+group = DefineGroup('Startup', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')
@@ -0,0 +1,29 @@
+import os
+import sys
+import rtconfig
+
+RTT_ROOT = os.path.normpath(os.getcwd() + '/../..')
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+from building import *
+
+TARGET = 'rtthread-lm3s.' + rtconfig.TARGET_EXT
+
+env = Environment(tools = ['mingw'],
+	AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+	CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
+	AR = rtconfig.AR, ARFLAGS = '-rc',
+	LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+
+Export('RTT_ROOT')
+Export('rtconfig')
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT)
+
+objs = objs + SConscript(('bsp/lm3s/Libraries/SConscript'), variant_dir='build/bsp/Libraries', duplicate=0)
+
+env.Program(TARGET, objs)
+
+# end building 
+EndBuilding(TARGET)
@@ -0,0 +1,83 @@
+/*
+ * File      : app.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://openlab.rt-thread.com/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2009-01-05     Bernard      the first version
+ */
+
+/**
+ * @addtogroup LM3S
+ */
+/*@{*/
+
+#include <rthw.h>
+#include <rtthread.h>
+
+#ifdef RT_USING_DFS
+/* dfs init */
+#include <dfs_init.h>
+/* dfs filesystem:ELM FatFs filesystem init */
+#include <dfs_elm.h>
+/* dfs Filesystem APIs */
+#include <dfs_fs.h>
+#endif
+
+#ifdef RT_USING_LWIP
+#include <lwip/sys.h>
+#include <lwip/api.h>
+#endif
+
+/* thread phase init */
+void rt_init_thread_entry(void *parameter)
+{
+/* Filesystem Initialization */
+#ifdef RT_USING_DFS
+	{
+		/* init the device filesystem */
+		dfs_init();
+#ifdef RT_USING_DFS_ELMFAT
+		/* init the elm chan FatFs filesystam*/
+		elm_init();
+
+		/* mount sd card fat partition 1 as root directory */
+		if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
+		{
+			rt_kprintf("File System initialized!\n");
+		}
+		else
+			rt_kprintf("File System initialzation failed!\n");
+#endif
+	}
+#endif
+
+/* LwIP Initialization */
+#ifdef RT_USING_LWIP
+	{
+		extern void lwip_sys_init(void);
+				
+		/* init lwip system */
+		lwip_sys_init();
+		rt_kprintf("TCP/IP initialized!\n");
+	}
+#endif
+}
+
+int rt_application_init()
+{
+	rt_thread_t init_thread;
+
+	init_thread = rt_thread_create("init",
+								rt_init_thread_entry, RT_NULL,
+								1024, 21, 20);
+	rt_thread_startup(init_thread);
+
+	return 0;
+}
+/*@}*/
@@ -0,0 +1,132 @@
+/*
+ * File      : board.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006 - 2009 RT-Thread Develop Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://openlab.rt-thread.com/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2009-05-16     Bernard      first implementation
+ */
+
+#include <rthw.h>
+#include <rtthread.h>
+#include <board.h>
+
+#include <inc/hw_types.h>
+#include <inc/hw_memmap.h>
+#include <inc/hw_uart.h>
+#include <driverlib/uart.h>
+#include <driverlib/gpio.h>
+#include <driverlib/sysctl.h>
+#include <driverlib/systick.h>
+#include <driverlib/interrupt.h>
+
+
+static void rt_hw_console_init(void);
+
+/**
+ * @addtogroup LM3S
+ */
+
+/*@{*/
+
+extern void rt_hw_interrupt_thread_switch(void);
+/**
+ * This is the timer interrupt service routine.
+ * 
+ */
+void rt_hw_timer_handler(void)
+{
+	/* enter interrupt */
+	rt_interrupt_enter();
+
+	rt_tick_increase();
+	
+	/* leave interrupt */
+	rt_interrupt_leave();
+	rt_hw_interrupt_thread_switch();
+}
+
+/**
+ * This is the ethernet interrupt service routine.
+ * 
+ */
+void rt_hw_eth_handler(void)
+{
+#ifdef RT_USING_LWIP
+		/* luminary ethernet interface */
+		extern void luminaryif_isr(void);
+		luminaryif_isr();
+#endif	
+}
+
+/**
+ * This function will initial LM3S board.
+ */
+void rt_hw_board_init()
+{
+	/* set ldo */
+	SysCtlLDOSet(SYSCTL_LDO_2_50V);
+	/* set clock */
+	SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN |
+                   LM3S_XTAL_TYPE);
+
+	/* init systick */
+	SysTickDisable();
+	SysTickPeriodSet(SysCtlClockGet()/RT_TICK_PER_SECOND);
+	SysTickIntEnable();
+	SysTickEnable();
+
+	/* enable ssio */
+	SysCtlPeripheralEnable(SYSCTL_PERIPH_SSI0);
+	
+	/* init console */
+	rt_hw_console_init();
+
+	/* enable interrupt */
+	IntMasterEnable();
+}
+
+/* init console to support rt_kprintf */
+static void rt_hw_console_init()
+{
+	/* Enable the UART0 peripherals */
+	SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
+	SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
+
+	/* Set GPIO A0 and A1 as UART pins. */
+	GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
+
+	/* Configure the UART for 115,200, 8-N-1 operation. */
+	UARTConfigSetExpClk(UART0_BASE, SysCtlClockGet(), 115200,
+	                    (UART_CONFIG_WLEN_8 | UART_CONFIG_STOP_ONE |
+	                     UART_CONFIG_PAR_NONE));
+}
+
+/* write one character to serial, must not trigger interrupt */
+static void rt_hw_console_putc(const char c)
+{
+	if (c == '\n')
+		while(UARTCharPutNonBlocking(UART0_BASE, '\r') == false);
+
+	while(UARTCharPutNonBlocking(UART0_BASE, c) == false);
+}
+
+/**
+ * This function is used by rt_kprintf to display a string on console.
+ *
+ * @param str the displayed string
+ */
+void rt_hw_console_output(const char* str)
+{
+	while (*str)
+	{
+		rt_hw_console_putc (*str++);
+	}
+}
+
+/*@}*/
@@ -0,0 +1,35 @@
+/*
+ * File      : board.h
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006, RT-Thread Develop Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://openlab.rt-thread.com/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2006-10-08     Bernard      add board.h to this bsp
+ * 2009-12-25     yi.qiu          add LM3S configration
+ */
+
+// <<< Use Configuration Wizard in Context Menu >>>
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+// <o> Internal SRAM memory size[Kbytes] <8-64>
+//	<i>Default: 64
+#define LM3S_SRAM_SIZE         64
+#define LM3S_SRAM_END          (0x20000000 + LM3S_SRAM_SIZE * 1024)
+
+// For lm3s8962, it should be SYSCTL_XTAL_8MHZ
+#define LM3S_XTAL_TYPE      	SYSCTL_XTAL_8MHZ
+
+void rt_hw_board_led_on(int n);
+void rt_hw_board_led_off(int n);
+void rt_hw_board_init(void);
+
+void rt_hw_usart_init(void);
+void rt_hw_sdcard_init(void);
+
+#endif
@@ -0,0 +1,123 @@
+/*
+ * linker script for LM3S with GNU ld
+ * yi.qiu 2009-12-26 modified from Bernard's stm32 version
+ */
+
+/* Program Entry, set to mark it as "used" and avoid gc */
+MEMORY
+{
+    CODE (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000
+    DATA (rw) : ORIGIN = 0x20000000, LENGTH = 0x00010000
+}
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+    .text :
+    {
+        . = ALIGN(4);
+        KEEP(*(.isr_vector))            /* Startup code */
+        . = ALIGN(4);
+        *(.text)                        /* remaining code */
+        *(.text.*)                      /* remaining code */
+        *(.rodata)                      /* read-only data (constants) */
+        *(.rodata*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+
+        /* section information for finsh shell */
+        . = ALIGN(4);
+        __fsymtab_start = .;
+        KEEP(*(FSymTab))
+        __fsymtab_end = .;
+        . = ALIGN(4);
+        __vsymtab_start = .;
+        KEEP(*(VSymTab))
+        __vsymtab_end = .;
+        . = ALIGN(4);
+
+        _etext = .;
+    } > CODE = 0
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+
+        /* This is used by the startup in order to initialize the .data secion */
+        _sidata = .;
+    } > CODE
+    __exidx_end = .;
+
+    /* .data section which is used for initialized data */
+    .data : AT (_sidata)
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _sdata = . ;
+
+        *(.data)
+        *(.data.*)
+
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _edata = . ;
+    } >DATA
+
+    __bss_start = .;
+    .bss :
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _sbss = .;
+
+        *(.bss)
+        *(COMMON)
+
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _ebss = . ;
+        _estack = .;
+        
+        *(.bss.init)
+    } > DATA
+    __bss_end = .;
+
+    _end = .;
+
+    /* Stabs debugging sections.  */
+    .stab          0 : { *(.stab) }
+    .stabstr       0 : { *(.stabstr) }
+    .stab.excl     0 : { *(.stab.excl) }
+    .stab.exclstr  0 : { *(.stab.exclstr) }
+    .stab.index    0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment       0 : { *(.comment) }
+    /* DWARF debug sections.
+     * Symbols in the DWARF debugging sections are relative to the beginning
+     * of the section so we begin them at 0.  */
+    /* DWARF 1 */
+    .debug          0 : { *(.debug) }
+    .line           0 : { *(.line) }
+    /* GNU DWARF 1 extensions */
+    .debug_srcinfo  0 : { *(.debug_srcinfo) }
+    .debug_sfnames  0 : { *(.debug_sfnames) }
+    /* DWARF 1.1 and DWARF 2 */
+    .debug_aranges  0 : { *(.debug_aranges) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    /* DWARF 2 */
+    .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+    .debug_abbrev   0 : { *(.debug_abbrev) }
+    .debug_line     0 : { *(.debug_line) }
+    .debug_frame    0 : { *(.debug_frame) }
+    .debug_str      0 : { *(.debug_str) }
+    .debug_loc      0 : { *(.debug_loc) }
+    .debug_macinfo  0 : { *(.debug_macinfo) }
+    /* SGI/MIPS DWARF 2 extensions */
+    .debug_weaknames 0 : { *(.debug_weaknames) }
+    .debug_funcnames 0 : { *(.debug_funcnames) }
+    .debug_typenames 0 : { *(.debug_typenames) }
+    .debug_varnames  0 : { *(.debug_varnames) }
+}
@@ -0,0 +1,15 @@
+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x00000000 0x00040000  {    ; load region size_region
+  ER_IROM1 0x00000000 0x00040000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+  RW_IRAM1 0x20000000 0x00010000  {  ; RW data
+   .ANY (+RW +ZI)
+  }
+}
+
@@ -0,0 +1,12 @@
+//*****************************************************************************
+//
+// luminaryif.h - Prototypes for the Luminary Micro Ethernet interface.
+//
+//*****************************************************************************
+
+#ifndef __LUMINARYIF_H__
+#define __LUMINARYIF_H__
+
+int rt_hw_luminaryif_init(void);
+
+#endif // __LUMINARYIF_H__
@@ -0,0 +1,153 @@
+/* RT-Thread config file */
+#ifndef __RTTHREAD_CFG_H__
+#define __RTTHREAD_CFG_H__
+
+/* RT_NAME_MAX*/
+#define RT_NAME_MAX	8
+
+/* RT_ALIGN_SIZE*/
+#define RT_ALIGN_SIZE	4
+
+/* PRIORITY_MAX*/
+#define RT_THREAD_PRIORITY_MAX	32
+
+/* Tick per Second*/
+#define RT_TICK_PER_SECOND	100
+
+/* SECTION: RT_DEBUG */
+/* Thread Debug*/
+/* #define RT_DEBUG */
+/* #define RT_THREAD_DEBUG */
+
+/* Using Hook*/
+#define RT_USING_HOOK
+
+/* SECTION: IPC */
+/* Using Semaphore*/
+#define RT_USING_SEMAPHORE
+
+/* Using Mutex*/
+#define RT_USING_MUTEX
+
+/* Using Event*/
+#define RT_USING_EVENT
+
+/* Using Faset Event*/
+/* #define RT_USING_FASTEVENT */
+
+/* Using MailBox*/
+#define RT_USING_MAILBOX
+
+/* Using Message Queue*/
+#define RT_USING_MESSAGEQUEUE
+
+/* SECTION: Memory Management */
+/* Using Memory Pool Management*/
+#define RT_USING_MEMPOOL
+
+/* Using Dynamic Heap Management*/
+#define RT_USING_HEAP
+
+/* Using Small MM*/
+#define RT_USING_SMALL_MEM
+
+/* Using SLAB Allocator*/
+/* #define RT_USING_SLAB */
+
+/* SECTION: Device System */
+/* Using Device System*/
+#define RT_USING_DEVICE
+
+#define RT_USING_UART1
+// #define RT_USING_UART2
+// #define RT_USING_UART3
+
+/* SECTION: Console options */
+#define RT_USING_CONSOLE
+/* the buffer size of console*/
+#define RT_CONSOLEBUF_SIZE	128
+
+/* SECTION: FinSH shell options */
+/* Using FinSH as Shell*/
+#define RT_USING_FINSH
+/* Using symbol table */
+#define FINSH_USING_SYMTAB
+#define FINSH_USING_DESCRIPTION
+
+#define RT_USING_DFS
+/* SECTION: DFS options */
+#define RT_USING_DFS_ELMFAT
+#define RT_DFS_ELM_WORD_ACCESS
+
+/* the max number of mounted filesystem */
+#define DFS_FILESYSTEMS_MAX		1
+/* the max number of opened files 		*/
+#define DFS_FD_MAX					4
+/* the max number of cached sector 		*/
+#define DFS_CACHE_MAX_NUM   		4
+
+/* SECTION: lwip, a lighwight TCP/IP protocol stack */
+/* Using lighweight TCP/IP protocol stack*/
+#define RT_USING_LWIP
+
+/* Trace LwIP protocol*/
+/* #define RT_LWIP_DEBUG */
+
+#define RT_LWIP_USING_RT_MEM
+
+/* Enable ICMP protocol*/
+#define RT_LWIP_ICMP
+
+/* Enable IGMP protocol*/
+#define RT_LWIP_IGMP
+
+/* Enable UDP protocol*/
+#define RT_LWIP_UDP
+
+/* Enable TCP protocol*/
+#define RT_LWIP_TCP
+
+/* the number of simulatenously active TCP connections*/
+#define RT_LWIP_TCP_PCB_NUM	5
+
+/* Ethernet padding size */
+#define RT_LWIP_ETH_PAD_SIZE 2
+
+/* TCP sender buffer space*/
+#define RT_LWIP_TCP_SND_BUF	1024*8
+/* Enable SNMP protocol*/
+#define RT_LWIP_SNMP
+
+/* Using DHCP*/
+/* #define RT_LWIP_DHCP */
+
+#define RT_LWIP_DNS
+
+/* ip address of target*/
+#define RT_LWIP_IPADDR0	192
+#define RT_LWIP_IPADDR1	168
+#define RT_LWIP_IPADDR2	1
+#define RT_LWIP_IPADDR3	30
+
+/* gateway address of target*/
+#define RT_LWIP_GWADDR0	192
+#define RT_LWIP_GWADDR1	168
+#define RT_LWIP_GWADDR2	1
+#define RT_LWIP_GWADDR3	1
+
+/* mask address of target*/
+#define RT_LWIP_MSKADDR0	255
+#define RT_LWIP_MSKADDR1	255
+#define RT_LWIP_MSKADDR2	255
+#define RT_LWIP_MSKADDR3	0
+
+/* tcp thread options */
+#define RT_LWIP_TCPTHREAD_PRIORITY		22
+#define RT_LWIP_TCPTHREAD_MBOX_SIZE		4
+#define RT_LWIP_TCPTHREAD_STACKSIZE		1024
+
+/* ethernet if thread options */
+#define RT_LWIP_ETHTHREAD_PRIORITY		23
+#define RT_LWIP_ETHTHREAD_MBOX_SIZE		4
+#define RT_LWIP_ETHTHREAD_STACKSIZE		512
+#endif
@@ -0,0 +1,67 @@
+# toolchains options
+ARCH='arm'
+CPU='lm3s'
+CROSS_TOOL 	= 'gcc'
+
+if  CROSS_TOOL == 'gcc':
+	PLATFORM 	= 'gcc'
+	EXEC_PATH 	= 'E:/Program Files/CodeSourcery/Sourcery G++ Lite/bin'
+elif CROSS_TOOL == 'keil':
+	PLATFORM 	= 'armcc'
+	EXEC_PATH 	= 'E:/Keil'
+BUILD = 'debug'
+
+if PLATFORM == 'gcc':
+    # toolchains
+    PREFIX = 'arm-none-eabi-'
+    CC = PREFIX + 'gcc'
+    AS = PREFIX + 'gcc'
+    AR = PREFIX + 'ar'
+    LINK = PREFIX + 'gcc'
+    TARGET_EXT = 'axf'
+    SIZE = PREFIX + 'size'
+    OBJDUMP = PREFIX + 'objdump'
+    OBJCPY = PREFIX + 'objcopy'
+
+    DEVICE = ' -mcpu=cortex-m3 -mthumb'
+    CFLAGS = DEVICE + ' -Dsourcerygxx -ffunction-sections -fdata-sections'
+    AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp'
+    LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rtthread-lm3s.map,-cref,-u,Reset_Handler -T lm3s_rom.ld'
+
+    CPATH = ''
+    LPATH = ''
+
+    if BUILD == 'debug':
+        CFLAGS += ' -O0 -gdwarf-2'
+        AFLAGS += ' -gdwarf-2'
+    else:
+        CFLAGS += ' -O2'
+
+    POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
+
+elif PLATFORM == 'armcc':
+    # toolchains
+    CC = 'armcc'
+    AS = 'armasm'
+    AR = 'armar'
+    LINK = 'armlink'
+    TARGET_EXT = 'axf'
+
+    DEVICE = ' --device DLM'
+    CFLAGS = DEVICE + ' --apcs=interwork'
+    AFLAGS = DEVICE
+    LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers --list rtthread-lm3s.map --scatter lm3s_rom.sct'
+
+    CFLAGS += ' -I' + EXEC_PATH + '/ARM/RV31/INC'
+    LFLAGS += ' --libpath ' + EXEC_PATH + '/ARM/RV31/LIB'
+
+    EXEC_PATH += '/arm/bin40/'
+
+    if BUILD == 'debug':
+        CFLAGS += ' -g -O0'
+        AFLAGS += ' -g'
+    else:
+        CFLAGS += ' -O2'
+
+    RT_USING_MINILIBC = False
+    POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
@@ -0,0 +1,151 @@
+/*
+ * File      : startup.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006, RT-Thread Develop Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://openlab.rt-thread.com/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2006-08-31     Bernard      first implementation
+ */
+
+#include <rthw.h>
+#include <rtthread.h>
+
+#include "board.h"
+
+#ifdef RT_USING_LWIP
+#include <lwip/sys.h>
+#include <netif/ethernetif.h>
+#endif
+
+/**
+ * @addtogroup LM3S
+ */
+
+extern void rt_hw_serial_init(void);
+
+/*@{*/
+#ifdef RT_USING_FINSH
+extern void finsh_system_init(void);
+extern void finsh_set_device(char* device);
+#endif
+
+extern int rt_application_init(void);
+extern void rt_hw_sdcard_init(void);
+extern int rt_hw_luminaryif_init(void);
+
+#ifdef __CC_ARM
+extern int Image$$RW_IRAM1$$ZI$$Limit;
+#elif __ICCARM__
+#pragma section="HEAP"
+#else
+extern int __bss_end;
+#endif
+
+#ifdef  DEBUG
+/*******************************************************************************
+* Function Name  : assert_failed
+* Description    : Reports the name of the source file and the source line number
+*                  where the assert error has occurred.
+* Input          : - file: pointer to the source file name
+*                  - line: assert error line source number
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void assert_failed(u8* file, u32 line)
+{
+	rt_kprintf("\n\r Wrong parameter value detected on\r\n");
+	rt_kprintf("       file  %s\r\n", file);
+	rt_kprintf("       line  %d\r\n", line);
+
+	while (1) ;
+}
+#endif
+
+/**
+ * This function will startup RT-Thread RTOS.
+ */
+void rtthread_startup(void)
+{
+	/* init board */
+	rt_hw_board_init();
+
+	/* show version */
+	rt_show_version();
+
+	/* init tick */
+	rt_system_tick_init();
+
+	/* init kernel object */
+	rt_system_object_init();
+
+	/* init timer system */
+	rt_system_timer_init();
+
+#ifdef RT_USING_HEAP
+#ifdef __CC_ARM
+	rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)LM3S_SRAM_END);
+#elif __ICCARM__
+	rt_system_heap_init(__segment_end("HEAP"), (void*)LM3S_SRAM_END);
+#else
+	/* init memory system */
+	rt_system_heap_init((void*)&__bss_end, (void*)LM3S_SRAM_END);
+#endif
+#endif
+
+	/* init scheduler system */
+	rt_system_scheduler_init();
+
+#ifdef RT_USING_LWIP
+	eth_system_device_init();
+
+	/* register ethernetif device */
+	rt_hw_luminaryif_init();
+#endif
+
+	/* init hardware serial device */
+	rt_hw_serial_init();
+#ifdef RT_USING_DFS
+	/* init sd card device */
+	rt_hw_sdcard_init();
+#endif
+	/* init all device */
+	rt_device_init_all();
+
+	/* init application */
+	rt_application_init();
+
+#ifdef RT_USING_FINSH
+	/* init finsh */
+	finsh_system_init();
+#ifdef RT_USING_DEVICE
+	finsh_set_device("uart1");
+#endif
+#endif
+
+	/* init idle thread */
+	rt_thread_idle_init();
+
+	/* start scheduler */
+	rt_system_scheduler_start();
+
+	/* never reach here */
+	return ;
+}
+
+int main(void)
+{
+	rt_uint32_t level UNUSED;
+
+	/* disable interrupt first */
+	level = rt_hw_interrupt_disable();
+	rtthread_startup();
+	
+	return 0;
+}
+
+/*@}*/
@@ -0,0 +1,98 @@
+### uVision2 Project, (C) Keil Software
+### Do not modify !
+
+Target (RT-Thread-lm3s), 0x0004 // Tools: 'ARM-ADS'
+
+
+
+
+Options 1,0,0  // Target 'RT-Thread-lm3s'
+ Device (LM3S8962)
+ Vendor (Luminary Micro)
+ Cpu (IRAM(0x20000000-0x2000FFFF) IROM(0-0x3FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3"))
+ FlashUt ()
+ StupF ("STARTUP\Luminary\Startup.s" ("Luminary Startup Code"))
+ FlashDR (UL2CM3(-UU0101L5E -O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0LM3S_256 -FS00 -FL040000))
+ DevID (4285)
+ Rgf (LM3Sxxx.H)
+ Mem ()
+ C ()
+ A ()
+ RL ()
+ OH ()
+ DBC_IFX ()
+ DBC_CMS ()
+ DBC_AMS ()
+ DBC_LMS ()
+ UseEnv=0
+ EnvBin ()
+ EnvInc ()
+ EnvLib ()
+ EnvReg (Luminary\)
+ OrgReg (Luminary\)
+ TgStat=16
+ OutDir (.\objs\)
+ OutName (rtthread-lm3s)
+ GenApp=1
+ GenLib=0
+ GenHex=0
+ Debug=1
+ Browse=1
+ LstDir (.\objs\)
+ HexSel=1
+ MG32K=0
+ TGMORE=0
+ RunUsr 0 0 <>
+ RunUsr 1 0 <>
+ BrunUsr 0 0 <>
+ BrunUsr 1 0 <>
+ CrunUsr 0 0 <>
+ CrunUsr 1 0 <>
+ SVCSID <>
+ GLFLAGS=1790
+ ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ACPUTYP ("Cortex-M3")
+ RVDEV ()
+ ADSTFLGA { 0,12,0,0,160,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 }
+ OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ OCMADSIRAM { 0,0,0,0,32,0,0,1,0 }
+ OCMADSIROM { 1,0,0,0,0,0,0,4,0 }
+ OCMADSXRAM { 0,0,0,0,0,0,0,0,0 }
+ OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,4,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0 }
+ RV_STAVEC ()
+ ADSCCFLG { 5,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ADSCMISC ()
+ ADSCDEFN ()
+ ADSCUDEF ()
+ ADSCINCD ()
+ ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ADSAMISC ()
+ ADSADEFN ()
+ ADSAUDEF ()
+ ADSAINCD ()
+ PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ IncBld=1
+ AlwaysBuild=0
+ GenAsm=0
+ AsmAsm=0
+ PublicsOnly=0
+ StopCode=3
+ CustArgs ()
+ LibMods ()
+ ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ADSLDTA (0x00000000)
+ ADSLDDA (0x00000000)
+ ADSLDSC ()
+ ADSLDIB ()
+ ADSLDIC ()
+ ADSLDMC ()
+ ADSLDIF ()
+ ADSLDDW ()
+  OPTDL (SARMCM3.DLL)()(DLM.DLL)(-pLM3S8962)(SARMCM3.DLL)()(TLM.DLL)(-pLM3S8962)
+  OPTDBG 48118,4,()()()()()()()()()() (BIN\lmidk-agdi.dll)()()()
+ FLASH1 { 1,0,0,0,1,0,0,0,3,16,0,0,0,0,0,0,0,0,0,0 }
+ FLASH2 (BIN\lmidk-agdi.dll)
+ FLASH3 ()
+ FLASH4 ()
+EndOpt
+