mirror of
https://github.com/RT-Thread/rt-thread.git
synced 2026-09-22 03:09:16 +08:00
[bsp][stm32] add stm32f407-st-discovery bsp
This commit is contained in:
SummerGift
@@ -0,0 +1,348 @@
|
||||
#
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# RT-Thread Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# RT-Thread Kernel
|
||||
#
|
||||
CONFIG_RT_NAME_MAX=8
|
||||
# CONFIG_RT_USING_SMP is not set
|
||||
CONFIG_RT_ALIGN_SIZE=4
|
||||
# CONFIG_RT_THREAD_PRIORITY_8 is not set
|
||||
CONFIG_RT_THREAD_PRIORITY_32=y
|
||||
# CONFIG_RT_THREAD_PRIORITY_256 is not set
|
||||
CONFIG_RT_THREAD_PRIORITY_MAX=32
|
||||
CONFIG_RT_TICK_PER_SECOND=1000
|
||||
CONFIG_RT_USING_OVERFLOW_CHECK=y
|
||||
CONFIG_RT_USING_HOOK=y
|
||||
CONFIG_RT_USING_IDLE_HOOK=y
|
||||
CONFIG_RT_IDEL_HOOK_LIST_SIZE=4
|
||||
CONFIG_IDLE_THREAD_STACK_SIZE=256
|
||||
# CONFIG_RT_USING_TIMER_SOFT is not set
|
||||
CONFIG_RT_DEBUG=y
|
||||
# CONFIG_RT_DEBUG_INIT_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_IPC_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_MEM_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
|
||||
# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
|
||||
|
||||
#
|
||||
# Inter-Thread communication
|
||||
#
|
||||
CONFIG_RT_USING_SEMAPHORE=y
|
||||
CONFIG_RT_USING_MUTEX=y
|
||||
CONFIG_RT_USING_EVENT=y
|
||||
CONFIG_RT_USING_MAILBOX=y
|
||||
CONFIG_RT_USING_MESSAGEQUEUE=y
|
||||
# CONFIG_RT_USING_SIGNALS is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
CONFIG_RT_USING_MEMPOOL=y
|
||||
# CONFIG_RT_USING_MEMHEAP is not set
|
||||
# CONFIG_RT_USING_NOHEAP is not set
|
||||
CONFIG_RT_USING_SMALL_MEM=y
|
||||
# CONFIG_RT_USING_SLAB is not set
|
||||
# CONFIG_RT_USING_MEMTRACE is not set
|
||||
CONFIG_RT_USING_HEAP=y
|
||||
|
||||
#
|
||||
# Kernel Device Object
|
||||
#
|
||||
CONFIG_RT_USING_DEVICE=y
|
||||
# CONFIG_RT_USING_DEVICE_OPS is not set
|
||||
# CONFIG_RT_USING_INTERRUPT_INFO is not set
|
||||
CONFIG_RT_USING_CONSOLE=y
|
||||
CONFIG_RT_CONSOLEBUF_SIZE=128
|
||||
CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
|
||||
CONFIG_RT_VER_NUM=0x40000
|
||||
CONFIG_ARCH_ARM=y
|
||||
CONFIG_ARCH_ARM_CORTEX_M=y
|
||||
CONFIG_ARCH_ARM_CORTEX_M4=y
|
||||
# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
|
||||
|
||||
#
|
||||
# RT-Thread Components
|
||||
#
|
||||
CONFIG_RT_USING_COMPONENTS_INIT=y
|
||||
CONFIG_RT_USING_USER_MAIN=y
|
||||
CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
|
||||
CONFIG_RT_MAIN_THREAD_PRIORITY=10
|
||||
|
||||
#
|
||||
# C++ features
|
||||
#
|
||||
# CONFIG_RT_USING_CPLUSPLUS is not set
|
||||
|
||||
#
|
||||
# Command shell
|
||||
#
|
||||
CONFIG_RT_USING_FINSH=y
|
||||
CONFIG_FINSH_THREAD_NAME="tshell"
|
||||
CONFIG_FINSH_USING_HISTORY=y
|
||||
CONFIG_FINSH_HISTORY_LINES=5
|
||||
CONFIG_FINSH_USING_SYMTAB=y
|
||||
CONFIG_FINSH_USING_DESCRIPTION=y
|
||||
# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
|
||||
CONFIG_FINSH_THREAD_PRIORITY=20
|
||||
CONFIG_FINSH_THREAD_STACK_SIZE=2048
|
||||
CONFIG_FINSH_CMD_SIZE=80
|
||||
# CONFIG_FINSH_USING_AUTH is not set
|
||||
CONFIG_FINSH_USING_MSH=y
|
||||
CONFIG_FINSH_USING_MSH_DEFAULT=y
|
||||
CONFIG_FINSH_USING_MSH_ONLY=y
|
||||
CONFIG_FINSH_ARG_MAX=10
|
||||
|
||||
#
|
||||
# Device virtual file system
|
||||
#
|
||||
# CONFIG_RT_USING_DFS is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_RT_USING_DEVICE_IPC=y
|
||||
CONFIG_RT_PIPE_BUFSZ=512
|
||||
CONFIG_RT_USING_SERIAL=y
|
||||
CONFIG_RT_SERIAL_USING_DMA=y
|
||||
# CONFIG_RT_USING_CAN is not set
|
||||
# CONFIG_RT_USING_HWTIMER is not set
|
||||
# CONFIG_RT_USING_CPUTIME is not set
|
||||
# CONFIG_RT_USING_I2C is not set
|
||||
CONFIG_RT_USING_PIN=y
|
||||
# CONFIG_RT_USING_ADC is not set
|
||||
# CONFIG_RT_USING_PWM is not set
|
||||
# CONFIG_RT_USING_MTD_NOR is not set
|
||||
# CONFIG_RT_USING_MTD_NAND is not set
|
||||
# CONFIG_RT_USING_MTD is not set
|
||||
# CONFIG_RT_USING_PM is not set
|
||||
# CONFIG_RT_USING_RTC is not set
|
||||
# CONFIG_RT_USING_SDIO is not set
|
||||
# CONFIG_RT_USING_SPI is not set
|
||||
# CONFIG_RT_USING_WDT is not set
|
||||
# CONFIG_RT_USING_AUDIO is not set
|
||||
|
||||
#
|
||||
# Using WiFi
|
||||
#
|
||||
# CONFIG_RT_USING_WIFI is not set
|
||||
|
||||
#
|
||||
# Using USB
|
||||
#
|
||||
# CONFIG_RT_USING_USB_HOST is not set
|
||||
# CONFIG_RT_USING_USB_DEVICE is not set
|
||||
|
||||
#
|
||||
# POSIX layer and C standard library
|
||||
#
|
||||
# CONFIG_RT_USING_LIBC is not set
|
||||
# CONFIG_RT_USING_PTHREADS is not set
|
||||
|
||||
#
|
||||
# Network
|
||||
#
|
||||
|
||||
#
|
||||
# Socket abstraction layer
|
||||
#
|
||||
# CONFIG_RT_USING_SAL is not set
|
||||
|
||||
#
|
||||
# light weight TCP/IP stack
|
||||
#
|
||||
# CONFIG_RT_USING_LWIP is not set
|
||||
|
||||
#
|
||||
# Modbus master and slave stack
|
||||
#
|
||||
# CONFIG_RT_USING_MODBUS is not set
|
||||
|
||||
#
|
||||
# AT commands
|
||||
#
|
||||
# CONFIG_RT_USING_AT is not set
|
||||
|
||||
#
|
||||
# VBUS(Virtual Software BUS)
|
||||
#
|
||||
# CONFIG_RT_USING_VBUS is not set
|
||||
|
||||
#
|
||||
# Utilities
|
||||
#
|
||||
# CONFIG_RT_USING_LOGTRACE is not set
|
||||
# CONFIG_RT_USING_RYM is not set
|
||||
# CONFIG_RT_USING_ULOG is not set
|
||||
# CONFIG_RT_USING_UTEST is not set
|
||||
|
||||
#
|
||||
# ARM CMSIS
|
||||
#
|
||||
# CONFIG_RT_USING_CMSIS_OS is not set
|
||||
# CONFIG_RT_USING_RTT_CMSIS is not set
|
||||
# CONFIG_RT_USING_LWP is not set
|
||||
|
||||
#
|
||||
# RT-Thread online packages
|
||||
#
|
||||
|
||||
#
|
||||
# IoT - internet of things
|
||||
#
|
||||
# CONFIG_PKG_USING_PAHOMQTT is not set
|
||||
# CONFIG_PKG_USING_WEBCLIENT is not set
|
||||
# CONFIG_PKG_USING_WEBNET is not set
|
||||
# CONFIG_PKG_USING_MONGOOSE is not set
|
||||
# CONFIG_PKG_USING_WEBTERMINAL is not set
|
||||
# CONFIG_PKG_USING_CJSON is not set
|
||||
# CONFIG_PKG_USING_JSMN is not set
|
||||
# CONFIG_PKG_USING_LJSON is not set
|
||||
# CONFIG_PKG_USING_EZXML is not set
|
||||
# CONFIG_PKG_USING_NANOPB is not set
|
||||
|
||||
#
|
||||
# Wi-Fi
|
||||
#
|
||||
|
||||
#
|
||||
# Marvell WiFi
|
||||
#
|
||||
# CONFIG_PKG_USING_WLANMARVELL is not set
|
||||
|
||||
#
|
||||
# Wiced WiFi
|
||||
#
|
||||
# CONFIG_PKG_USING_WLAN_WICED is not set
|
||||
# CONFIG_PKG_USING_COAP is not set
|
||||
# CONFIG_PKG_USING_NOPOLL is not set
|
||||
# CONFIG_PKG_USING_NETUTILS is not set
|
||||
# CONFIG_PKG_USING_AT_DEVICE is not set
|
||||
# CONFIG_PKG_USING_WIZNET is not set
|
||||
|
||||
#
|
||||
# IoT Cloud
|
||||
#
|
||||
# CONFIG_PKG_USING_ONENET is not set
|
||||
# CONFIG_PKG_USING_GAGENT_CLOUD is not set
|
||||
# CONFIG_PKG_USING_ALI_IOTKIT is not set
|
||||
# CONFIG_PKG_USING_AZURE is not set
|
||||
# CONFIG_PKG_USING_TENCENT_IOTKIT is not set
|
||||
|
||||
#
|
||||
# security packages
|
||||
#
|
||||
# CONFIG_PKG_USING_MBEDTLS is not set
|
||||
# CONFIG_PKG_USING_libsodium is not set
|
||||
# CONFIG_PKG_USING_TINYCRYPT is not set
|
||||
|
||||
#
|
||||
# language packages
|
||||
#
|
||||
# CONFIG_PKG_USING_LUA is not set
|
||||
# CONFIG_PKG_USING_JERRYSCRIPT is not set
|
||||
# CONFIG_PKG_USING_MICROPYTHON is not set
|
||||
|
||||
#
|
||||
# multimedia packages
|
||||
#
|
||||
# CONFIG_PKG_USING_OPENMV is not set
|
||||
# CONFIG_PKG_USING_MUPDF is not set
|
||||
|
||||
#
|
||||
# tools packages
|
||||
#
|
||||
# CONFIG_PKG_USING_CMBACKTRACE is not set
|
||||
# CONFIG_PKG_USING_EASYFLASH is not set
|
||||
# CONFIG_PKG_USING_EASYLOGGER is not set
|
||||
# CONFIG_PKG_USING_SYSTEMVIEW is not set
|
||||
# CONFIG_PKG_USING_RDB is not set
|
||||
# CONFIG_PKG_USING_QRCODE is not set
|
||||
# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
|
||||
|
||||
#
|
||||
# system packages
|
||||
#
|
||||
# CONFIG_PKG_USING_GUIENGINE is not set
|
||||
# CONFIG_PKG_USING_PERSIMMON is not set
|
||||
# CONFIG_PKG_USING_CAIRO is not set
|
||||
# CONFIG_PKG_USING_PIXMAN is not set
|
||||
# CONFIG_PKG_USING_LWEXT4 is not set
|
||||
# CONFIG_PKG_USING_PARTITION is not set
|
||||
# CONFIG_PKG_USING_FAL is not set
|
||||
# CONFIG_PKG_USING_SQLITE is not set
|
||||
# CONFIG_PKG_USING_RTI is not set
|
||||
# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
|
||||
# CONFIG_PKG_USING_CMSIS is not set
|
||||
# CONFIG_PKG_USING_DFS_YAFFS is not set
|
||||
# CONFIG_PKG_USING_LITTLEFS is not set
|
||||
|
||||
#
|
||||
# peripheral libraries and drivers
|
||||
#
|
||||
# CONFIG_PKG_USING_REALTEK_AMEBA is not set
|
||||
# CONFIG_PKG_USING_SHT2X is not set
|
||||
# CONFIG_PKG_USING_AHT10 is not set
|
||||
# CONFIG_PKG_USING_AP3216C is not set
|
||||
# CONFIG_PKG_USING_STM32_SDIO is not set
|
||||
# CONFIG_PKG_USING_ICM20608 is not set
|
||||
# CONFIG_PKG_USING_U8G2 is not set
|
||||
# CONFIG_PKG_USING_BUTTON is not set
|
||||
# CONFIG_PKG_USING_MPU6XXX is not set
|
||||
# CONFIG_PKG_USING_PCF8574 is not set
|
||||
# CONFIG_PKG_USING_KENDRYTE_SDK is not set
|
||||
|
||||
#
|
||||
# miscellaneous packages
|
||||
#
|
||||
# CONFIG_PKG_USING_LIBCSV is not set
|
||||
# CONFIG_PKG_USING_OPTPARSE is not set
|
||||
# CONFIG_PKG_USING_FASTLZ is not set
|
||||
# CONFIG_PKG_USING_MINILZO is not set
|
||||
# CONFIG_PKG_USING_QUICKLZ is not set
|
||||
# CONFIG_PKG_USING_MULTIBUTTON is not set
|
||||
# CONFIG_PKG_USING_CANFESTIVAL is not set
|
||||
# CONFIG_PKG_USING_ZLIB is not set
|
||||
# CONFIG_PKG_USING_DSTR is not set
|
||||
# CONFIG_PKG_USING_TINYFRAME is not set
|
||||
|
||||
#
|
||||
# samples: kernel and components samples
|
||||
#
|
||||
# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
|
||||
# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
|
||||
# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
|
||||
# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
|
||||
# CONFIG_PKG_USING_HELLO is not set
|
||||
CONFIG_SOC_FAMILY_STM32=y
|
||||
CONFIG_SOC_SERIES_STM32F4=y
|
||||
|
||||
#
|
||||
# Hardware Drivers Config
|
||||
#
|
||||
CONFIG_SOC_STM32F407VG=y
|
||||
|
||||
#
|
||||
# Onboard Peripheral Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# On-chip Peripheral Drivers
|
||||
#
|
||||
CONFIG_BSP_USING_GPIO=y
|
||||
CONFIG_BSP_USING_UART1=y
|
||||
# CONFIG_BSP_UART_USING_DMA_RX is not set
|
||||
# CONFIG_BSP_USING_SPI1 is not set
|
||||
# CONFIG_BSP_SPI_USING_DMA is not set
|
||||
# CONFIG_BSP_USING_I2C1 is not set
|
||||
|
||||
#
|
||||
# Board extended module Drivers
|
||||
#
|
||||
@@ -0,0 +1,42 @@
|
||||
*.pyc
|
||||
*.map
|
||||
*.dblite
|
||||
*.elf
|
||||
*.bin
|
||||
*.hex
|
||||
*.axf
|
||||
*.exe
|
||||
*.pdb
|
||||
*.idb
|
||||
*.ilk
|
||||
*.old
|
||||
build
|
||||
Debug
|
||||
documentation/html
|
||||
packages/
|
||||
*~
|
||||
*.o
|
||||
*.obj
|
||||
*.out
|
||||
*.bak
|
||||
*.dep
|
||||
*.lib
|
||||
*.i
|
||||
*.d
|
||||
.DS_Stor*
|
||||
.config 3
|
||||
.config 4
|
||||
.config 5
|
||||
Midea-X1
|
||||
*.uimg
|
||||
GPATH
|
||||
GRTAGS
|
||||
GTAGS
|
||||
.vscode
|
||||
JLinkLog.txt
|
||||
JLinkSettings.ini
|
||||
DebugConfig/
|
||||
RTE/
|
||||
settings/
|
||||
*.uvguix*
|
||||
cconfig.h
|
||||
@@ -0,0 +1,21 @@
|
||||
mainmenu "RT-Thread Configuration"
|
||||
|
||||
config $BSP_DIR
|
||||
string
|
||||
option env="BSP_ROOT"
|
||||
default "."
|
||||
|
||||
config $RTT_DIR
|
||||
string
|
||||
option env="RTT_ROOT"
|
||||
default "../../.."
|
||||
|
||||
config $PKGS_DIR
|
||||
string
|
||||
option env="PKGS_ROOT"
|
||||
default "packages"
|
||||
|
||||
source "$RTT_DIR/Kconfig"
|
||||
source "$PKGS_DIR/Kconfig"
|
||||
source "../libraries/Kconfig"
|
||||
source "board/Kconfig"
|
||||
@@ -0,0 +1,106 @@
|
||||
# STM32F4DISCOVERY 开发板 BSP 说明
|
||||
|
||||
## 简介
|
||||
|
||||
本文档为 RT-Thread 开发团队为 STM32F4DISCOVERY 开发板提供的 BSP (板级支持包) 说明。
|
||||
|
||||
主要内容如下：
|
||||
|
||||
- 开发板资源介绍
|
||||
- BSP 快速上手
|
||||
- 进阶使用方法
|
||||
|
||||
通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。
|
||||
|
||||
## 开发板介绍
|
||||
|
||||
STM32F4DISCOVERY 是 ST 推出的一款基于 ARM Cortex-M4 内核的开发板，最高主频为 168Mhz，该开发板具有丰富的板载资源，可以充分发挥 STM32F407 的芯片性能。
|
||||
|
||||
开发板外观如下图所示：
|
||||
|
||||
|
||||
|
||||
该开发板常用 **板载资源** 如下：
|
||||
|
||||
- MCU：STM32F407VGT6，主频 168MHz，1024KB FLASH ，192KB RAM
|
||||
- 常用外设
|
||||
- LED：4个用户 LEDs， LD3（orange，PD13），LD4(green，PD12)，LD5 (red,PD14) and LD6 (blue，PD15)。
|
||||
- 按键，2个，Reset 和 User。
|
||||
- 调试接口，板载 ST-LINK/V2调试器，使用SWD调试模式。
|
||||
|
||||
开发板更多详细信息请参考 ST 官方 [STM32F4DISCOVERY开发板介绍](https://www.st.com/content/st_com/en/products/evaluation-tools/product-evaluation-tools/mcu-eval-tools/stm32-mcu-eval-tools/stm32-mcu-discovery-kits/stm32f4discovery.html)。
|
||||
|
||||
## 外设支持
|
||||
|
||||
本 BSP 目前对外设的支持情况如下：
|
||||
|
||||
| **片上外设** | **支持情况** | **备注** |
|
||||
| :------------ | :----------: | :-----------------------------------: |
|
||||
| GPIO | 支持 | PA0, PA1... PH1 ---> PIN: 0, 1...144 |
|
||||
| UART | 支持 | UART1 |
|
||||
| SPI | 支持 | SPI1 |
|
||||
| I2C | 支持 | 软件 I2C |
|
||||
|
||||
## 使用说明
|
||||
|
||||
使用说明分为如下两个章节：
|
||||
|
||||
- 快速上手
|
||||
|
||||
本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。
|
||||
|
||||
- 进阶使用
|
||||
|
||||
本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。
|
||||
|
||||
|
||||
### 快速上手
|
||||
|
||||
本 BSP 为开发者提供 MDK4、MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。
|
||||
|
||||
#### 硬件连接
|
||||
|
||||
使用数据线连接开发板到 PC，打开电源开关。
|
||||
|
||||
#### 编译下载
|
||||
|
||||
双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。
|
||||
|
||||
> 工程默认配置使用 ST-LINK 下载程序，在通过ST-LINK 连接开发板的基础上，点击下载按钮即可下载程序到开发板
|
||||
|
||||
#### 运行结果
|
||||
|
||||
下载程序成功之后，系统会自动运行，观察开发板上 LED 的运行效果，红色 LD1 和 LD2 常亮，红色 LD5 会周期性闪烁。
|
||||
|
||||
连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息:
|
||||
|
||||
```c
|
||||
\ | /
|
||||
- RT - Thread Operating System
|
||||
/ | \ 3.1.1 build Nov 19 2018
|
||||
2006 - 2018 Copyright by rt-thread team
|
||||
msh >
|
||||
```
|
||||
### 进阶使用
|
||||
|
||||
此 BSP 默认只开启了 GPIO 和 串口1 的功能，更多高级功能，需要利用 ENV 工具对 BSP 进行配置，步骤如下：
|
||||
|
||||
1. 在 bsp 下打开 env 工具。
|
||||
|
||||
2. 输入`menuconfig`命令配置工程，配置好之后保存退出。
|
||||
|
||||
3. 输入`pkgs --update`命令更新软件包。
|
||||
|
||||
4. 输入`scons --target=mdk4/mdk5/iar` 命令重新生成工程。
|
||||
|
||||
本章节更多详细的介绍请参考 [BSP 进阶使用指南](../docs/BSP进阶使用指南.md)。
|
||||
|
||||
## 注意事项
|
||||
|
||||
暂无
|
||||
|
||||
## 联系人信息
|
||||
|
||||
维护人:
|
||||
|
||||
- [misonyo](https://github.com/misonyo)
|
||||
@@ -0,0 +1,14 @@
|
||||
# for module compiling
|
||||
import os
|
||||
Import('RTT_ROOT')
|
||||
|
||||
cwd = str(Dir('#'))
|
||||
objs = []
|
||||
list = os.listdir(cwd)
|
||||
|
||||
for d in list:
|
||||
path = os.path.join(cwd, d)
|
||||
if os.path.isfile(os.path.join(path, 'SConscript')):
|
||||
objs = objs + SConscript(os.path.join(d, 'SConscript'))
|
||||
|
||||
Return('objs')
|
||||
@@ -0,0 +1,58 @@
|
||||
import os
|
||||
import sys
|
||||
import rtconfig
|
||||
|
||||
if os.getenv('RTT_ROOT'):
|
||||
RTT_ROOT = os.getenv('RTT_ROOT')
|
||||
else:
|
||||
RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..')
|
||||
|
||||
sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
|
||||
try:
|
||||
from building import *
|
||||
except:
|
||||
print('Cannot found RT-Thread root directory, please check RTT_ROOT')
|
||||
print(RTT_ROOT)
|
||||
exit(-1)
|
||||
|
||||
TARGET = 'rtthread.' + rtconfig.TARGET_EXT
|
||||
|
||||
env = Environment(tools = ['mingw'],
|
||||
AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
|
||||
CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
|
||||
AR = rtconfig.AR, ARFLAGS = '-rc',
|
||||
LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
|
||||
env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
|
||||
|
||||
if rtconfig.PLATFORM == 'iar':
|
||||
env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
|
||||
env.Replace(ARFLAGS = [''])
|
||||
env.Replace(LINKCOM = ['$LINK $SOURCES $LINKFLAGS -o $TARGET --map rtthread.map'])
|
||||
|
||||
Export('RTT_ROOT')
|
||||
Export('rtconfig')
|
||||
|
||||
SDK_ROOT = os.path.abspath('./')
|
||||
|
||||
if os.path.exists(SDK_ROOT + '/libraries'):
|
||||
libraries_path_prefix = SDK_ROOT + '/libraries'
|
||||
else:
|
||||
libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries'
|
||||
|
||||
SDK_LIB = libraries_path_prefix
|
||||
Export('SDK_LIB')
|
||||
|
||||
# prepare building environment
|
||||
objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
|
||||
|
||||
stm32_library = 'STM32F4xx_HAL'
|
||||
rtconfig.BSP_LIBRARY_TYPE = stm32_library
|
||||
|
||||
# include libraries
|
||||
objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript')))
|
||||
|
||||
# include drivers
|
||||
objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript')))
|
||||
|
||||
# make a building
|
||||
DoBuilding(TARGET, objs)
|
||||
@@ -0,0 +1,12 @@
|
||||
import rtconfig
|
||||
from building import *
|
||||
|
||||
cwd = GetCurrentDir()
|
||||
CPPPATH = [cwd, str(Dir('#'))]
|
||||
src = Split("""
|
||||
main.c
|
||||
""")
|
||||
|
||||
group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
|
||||
|
||||
Return('group')
|
||||
@@ -0,0 +1,34 @@
|
||||
/*
|
||||
* Copyright (c) 2006-2018, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2018-11-06 misonyo first version
|
||||
*/
|
||||
|
||||
#include <rtthread.h>
|
||||
#include <rtdevice.h>
|
||||
#include <board.h>
|
||||
#include "drv_gpio.h"
|
||||
|
||||
/* defined the LED0 pin: PD14 */
|
||||
#define LED0_PIN GET_PIN(D, 14)
|
||||
|
||||
int main(void)
|
||||
{
|
||||
int count = 1;
|
||||
/* set LED0 pin mode to output */
|
||||
rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT);
|
||||
|
||||
while (count++)
|
||||
{
|
||||
rt_pin_write(LED0_PIN, PIN_HIGH);
|
||||
rt_thread_mdelay(500);
|
||||
rt_pin_write(LED0_PIN, PIN_LOW);
|
||||
rt_thread_mdelay(500);
|
||||
}
|
||||
|
||||
return RT_EOK;
|
||||
}
|
||||
File diff suppressed because one or more lines are too long
@@ -0,0 +1,174 @@
|
||||
#MicroXplorer Configuration settings - do not modify
|
||||
File.Version=6
|
||||
KeepUserPlacement=true
|
||||
Mcu.Family=STM32F4
|
||||
Mcu.IP0=NVIC
|
||||
Mcu.IP1=RCC
|
||||
Mcu.IP2=SPI1
|
||||
Mcu.IP3=SYS
|
||||
Mcu.IP4=USART1
|
||||
Mcu.IPNb=5
|
||||
Mcu.Name=STM32F407V(E-G)Tx
|
||||
Mcu.Package=LQFP100
|
||||
Mcu.Pin0=PH0-OSC_IN
|
||||
Mcu.Pin1=PH1-OSC_OUT
|
||||
Mcu.Pin10=VP_SYS_VS_Systick
|
||||
Mcu.Pin2=PA5
|
||||
Mcu.Pin3=PA6
|
||||
Mcu.Pin4=PA7
|
||||
Mcu.Pin5=PA13
|
||||
Mcu.Pin6=PA14
|
||||
Mcu.Pin7=PB3
|
||||
Mcu.Pin8=PB6
|
||||
Mcu.Pin9=PB7
|
||||
Mcu.PinsNb=11
|
||||
Mcu.ThirdPartyNb=0
|
||||
Mcu.UserConstants=
|
||||
Mcu.UserName=STM32F407VGTx
|
||||
MxCube.Version=5.0.0
|
||||
MxDb.Version=DB.5.0.0
|
||||
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true
|
||||
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true
|
||||
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true
|
||||
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true
|
||||
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true
|
||||
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true
|
||||
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_0
|
||||
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true
|
||||
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true
|
||||
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true
|
||||
PA13.GPIOParameters=GPIO_Label
|
||||
PA13.GPIO_Label=SWDIO
|
||||
PA13.Locked=true
|
||||
PA13.Mode=Serial_Wire
|
||||
PA13.Signal=SYS_JTMS-SWDIO
|
||||
PA14.GPIOParameters=GPIO_Label
|
||||
PA14.GPIO_Label=SWCLK
|
||||
PA14.Locked=true
|
||||
PA14.Mode=Serial_Wire
|
||||
PA14.Signal=SYS_JTCK-SWCLK
|
||||
PA5.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
|
||||
PA5.GPIO_Label=SPI1_SCK [LIS302DL_SCL/SPC]
|
||||
PA5.GPIO_Mode=GPIO_MODE_AF_PP
|
||||
PA5.GPIO_PuPd=GPIO_NOPULL
|
||||
PA5.GPIO_Speed=GPIO_SPEED_FREQ_LOW
|
||||
PA5.Locked=true
|
||||
PA5.Mode=Full_Duplex_Master
|
||||
PA5.Signal=SPI1_SCK
|
||||
PA6.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
|
||||
PA6.GPIO_Label=SPI1_MISO [LIS302DL_SDO]
|
||||
PA6.GPIO_Mode=GPIO_MODE_AF_PP
|
||||
PA6.GPIO_PuPd=GPIO_NOPULL
|
||||
PA6.GPIO_Speed=GPIO_SPEED_FREQ_LOW
|
||||
PA6.Locked=true
|
||||
PA6.Mode=Full_Duplex_Master
|
||||
PA6.Signal=SPI1_MISO
|
||||
PA7.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode
|
||||
PA7.GPIO_Label=SPI1_MOSI [LIS302DL_SDA/SDI/SDO]
|
||||
PA7.GPIO_Mode=GPIO_MODE_AF_PP
|
||||
PA7.GPIO_PuPd=GPIO_NOPULL
|
||||
PA7.GPIO_Speed=GPIO_SPEED_FREQ_LOW
|
||||
PA7.Locked=true
|
||||
PA7.Mode=Full_Duplex_Master
|
||||
PA7.Signal=SPI1_MOSI
|
||||
PB3.GPIOParameters=GPIO_Label
|
||||
PB3.GPIO_Label=SWO
|
||||
PB3.Locked=true
|
||||
PB3.Signal=SYS_JTDO-SWO
|
||||
PB6.Mode=Asynchronous
|
||||
PB6.Signal=USART1_TX
|
||||
PB7.Mode=Asynchronous
|
||||
PB7.Signal=USART1_RX
|
||||
PCC.Checker=false
|
||||
PCC.Line=STM32F407/417
|
||||
PCC.MCU=STM32F407V(E-G)Tx
|
||||
PCC.PartNumber=STM32F407VGTx
|
||||
PCC.Seq0=0
|
||||
PCC.Series=STM32F4
|
||||
PCC.Temperature=25
|
||||
PCC.Vdd=3.3
|
||||
PH0-OSC_IN.GPIOParameters=GPIO_Label
|
||||
PH0-OSC_IN.GPIO_Label=PH0-OSC_IN
|
||||
PH0-OSC_IN.Locked=true
|
||||
PH0-OSC_IN.Mode=HSE-External-Oscillator
|
||||
PH0-OSC_IN.Signal=RCC_OSC_IN
|
||||
PH1-OSC_OUT.GPIOParameters=GPIO_Label
|
||||
PH1-OSC_OUT.GPIO_Label=PH1-OSC_OUT
|
||||
PH1-OSC_OUT.Locked=true
|
||||
PH1-OSC_OUT.Mode=HSE-External-Oscillator
|
||||
PH1-OSC_OUT.Signal=RCC_OSC_OUT
|
||||
PinOutPanel.RotationAngle=0
|
||||
ProjectManager.AskForMigrate=true
|
||||
ProjectManager.BackupPrevious=false
|
||||
ProjectManager.CompilerOptimize=6
|
||||
ProjectManager.ComputerToolchain=false
|
||||
ProjectManager.CoupleFile=false
|
||||
ProjectManager.CustomerFirmwarePackage=..\\..\\..\\..\\..\\..\\..\\..\\board\\stm32cubefx-repo\\STM32Cube_FW_F4_V1.11.0
|
||||
ProjectManager.DefaultFWLocation=false
|
||||
ProjectManager.DeletePrevious=true
|
||||
ProjectManager.DeviceId=STM32F407VGTx
|
||||
ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.22.0
|
||||
ProjectManager.FreePins=false
|
||||
ProjectManager.HalAssertFull=false
|
||||
ProjectManager.HeapSize=0x200
|
||||
ProjectManager.KeepUserCode=true
|
||||
ProjectManager.LastFirmware=false
|
||||
ProjectManager.LibraryCopy=0
|
||||
ProjectManager.MainLocation=Src
|
||||
ProjectManager.NoMain=false
|
||||
ProjectManager.PreviousToolchain=
|
||||
ProjectManager.ProjectBuild=false
|
||||
ProjectManager.ProjectFileName=CubeMX_Config.ioc
|
||||
ProjectManager.ProjectName=CubeMX_Config
|
||||
ProjectManager.StackSize=0x400
|
||||
ProjectManager.TargetToolchain=MDK-ARM V5
|
||||
ProjectManager.ToolChainLocation=
|
||||
ProjectManager.UnderRoot=false
|
||||
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_SPI1_Init-SPI1-false-HAL-true,4-MX_USART1_UART_Init-USART1-false-HAL-true
|
||||
RCC.48MHZClocksFreq_Value=48000000
|
||||
RCC.AHBFreq_Value=168000000
|
||||
RCC.APB1CLKDivider=RCC_HCLK_DIV4
|
||||
RCC.APB1Freq_Value=42000000
|
||||
RCC.APB1TimFreq_Value=84000000
|
||||
RCC.APB2CLKDivider=RCC_HCLK_DIV2
|
||||
RCC.APB2Freq_Value=84000000
|
||||
RCC.APB2TimFreq_Value=168000000
|
||||
RCC.CortexFreq_Value=168000000
|
||||
RCC.EthernetFreq_Value=168000000
|
||||
RCC.FCLKCortexFreq_Value=168000000
|
||||
RCC.FamilyName=M
|
||||
RCC.HCLKFreq_Value=168000000
|
||||
RCC.HSE_VALUE=8000000
|
||||
RCC.HSI_VALUE=16000000
|
||||
RCC.I2SClocksFreq_Value=96000000
|
||||
RCC.IPParameters=48MHZClocksFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2SClocksFreq_Value,LSE_VALUE,LSI_VALUE,MCO2PinFreq_Value,PLLCLKFreq_Value,PLLM,PLLN,PLLQ,PLLQCLKFreq_Value,PLLSourceVirtual,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VcooutputI2S
|
||||
RCC.LSE_VALUE=32768
|
||||
RCC.LSI_VALUE=32000
|
||||
RCC.MCO2PinFreq_Value=168000000
|
||||
RCC.PLLCLKFreq_Value=168000000
|
||||
RCC.PLLM=8
|
||||
RCC.PLLN=336
|
||||
RCC.PLLQ=7
|
||||
RCC.PLLQCLKFreq_Value=48000000
|
||||
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
|
||||
RCC.RTCFreq_Value=32000
|
||||
RCC.RTCHSEDivFreq_Value=4000000
|
||||
RCC.SYSCLKFreq_VALUE=168000000
|
||||
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
|
||||
RCC.VCOI2SOutputFreq_Value=192000000
|
||||
RCC.VCOInputFreq_Value=1000000
|
||||
RCC.VCOOutputFreq_Value=336000000
|
||||
RCC.VcooutputI2S=96000000
|
||||
SPI1.BaudRatePrescaler-Full_Duplex_Master=SPI_BAUDRATEPRESCALER_2
|
||||
SPI1.CalculateBaudRate-Full_Duplex_Master=42.0 MBits/s
|
||||
SPI1.Direction=SPI_DIRECTION_2LINES
|
||||
SPI1.IPParameters=CalculateBaudRate-Full_Duplex_Master,BaudRatePrescaler-Full_Duplex_Master,Mode-Full_Duplex_Master,Mode,VirtualType,Direction
|
||||
SPI1.Mode=SPI_MODE_MASTER
|
||||
SPI1.Mode-Full_Duplex_Master=SPI_MODE_MASTER
|
||||
SPI1.VirtualType=VM_MASTER
|
||||
USART1.IPParameters=VirtualMode
|
||||
USART1.VirtualMode=VM_ASYNC
|
||||
VP_SYS_VS_Systick.Mode=SysTick
|
||||
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
|
||||
board=STM32F4DISCOVERY
|
||||
boardIOC=true
|
||||
@@ -0,0 +1,117 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.h
|
||||
* @brief : Header for main.c file.
|
||||
* This file contains the common defines of the application.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __MAIN_H
|
||||
#define __MAIN_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void Error_Handler(void);
|
||||
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
#define PH0_OSC_IN_Pin GPIO_PIN_0
|
||||
#define PH0_OSC_IN_GPIO_Port GPIOH
|
||||
#define PH1_OSC_OUT_Pin GPIO_PIN_1
|
||||
#define PH1_OSC_OUT_GPIO_Port GPIOH
|
||||
#define SPI1_SCK_Pin GPIO_PIN_5
|
||||
#define SPI1_SCK_GPIO_Port GPIOA
|
||||
#define SPI1_MISO_Pin GPIO_PIN_6
|
||||
#define SPI1_MISO_GPIO_Port GPIOA
|
||||
#define SPI1_MOSI_Pin GPIO_PIN_7
|
||||
#define SPI1_MOSI_GPIO_Port GPIOA
|
||||
#define SWDIO_Pin GPIO_PIN_13
|
||||
#define SWDIO_GPIO_Port GPIOA
|
||||
#define SWCLK_Pin GPIO_PIN_14
|
||||
#define SWCLK_GPIO_Port GPIOA
|
||||
#define SWO_Pin GPIO_PIN_3
|
||||
#define SWO_GPIO_Port GPIOB
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __MAIN_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,451 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_conf.h
|
||||
* @brief HAL configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2018 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_CONF_H
|
||||
#define __STM32F4xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
|
||||
/* #define HAL_ADC_MODULE_ENABLED */
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
/* #define HAL_CAN_MODULE_ENABLED */
|
||||
/* #define HAL_CRC_MODULE_ENABLED */
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
/* #define HAL_DAC_MODULE_ENABLED */
|
||||
/* #define HAL_DCMI_MODULE_ENABLED */
|
||||
/* #define HAL_DMA2D_MODULE_ENABLED */
|
||||
/* #define HAL_ETH_MODULE_ENABLED */
|
||||
/* #define HAL_NAND_MODULE_ENABLED */
|
||||
/* #define HAL_NOR_MODULE_ENABLED */
|
||||
/* #define HAL_PCCARD_MODULE_ENABLED */
|
||||
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||
/* #define HAL_HASH_MODULE_ENABLED */
|
||||
/* #define HAL_I2C_MODULE_ENABLED */
|
||||
/* #define HAL_I2S_MODULE_ENABLED */
|
||||
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||
/* #define HAL_LTDC_MODULE_ENABLED */
|
||||
/* #define HAL_RNG_MODULE_ENABLED */
|
||||
/* #define HAL_RTC_MODULE_ENABLED */
|
||||
/* #define HAL_SAI_MODULE_ENABLED */
|
||||
/* #define HAL_SD_MODULE_ENABLED */
|
||||
/* #define HAL_MMC_MODULE_ENABLED */
|
||||
#define HAL_SPI_MODULE_ENABLED
|
||||
/* #define HAL_TIM_MODULE_ENABLED */
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
/* #define HAL_PCD_MODULE_ENABLED */
|
||||
/* #define HAL_HCD_MODULE_ENABLED */
|
||||
/* #define HAL_DSI_MODULE_ENABLED */
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
/* #define HAL_CEC_MODULE_ENABLED */
|
||||
/* #define HAL_FMPI2C_MODULE_ENABLED */
|
||||
/* #define HAL_SPDIFRX_MODULE_ENABLED */
|
||||
/* #define HAL_DFSDM_MODULE_ENABLED */
|
||||
/* #define HAL_LPTIM_MODULE_ENABLED */
|
||||
/* #define HAL_EXTI_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
|
||||
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#if !defined (EXTERNAL_CLOCK_VALUE)
|
||||
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## Ethernet peripheral configuration ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2U
|
||||
#define MAC_ADDR1 0U
|
||||
#define MAC_ADDR2 0U
|
||||
#define MAC_ADDR3 0U
|
||||
#define MAC_ADDR4 0U
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848_PHY_ADDRESS Address*/
|
||||
#define DP83848_PHY_ADDRESS 0x01U
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
|
||||
|
||||
#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
|
||||
#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
|
||||
|
||||
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 0U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma2d.h"
|
||||
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SDRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sdram.h"
|
||||
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_ltdc.h"
|
||||
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DSI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dsi.h"
|
||||
#endif /* HAL_DSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FMPI2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_fmpi2c.h"
|
||||
#endif /* HAL_FMPI2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPDIFRX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spdifrx.h"
|
||||
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dfsdm.h"
|
||||
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr: If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_CONF_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,84 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_it.h
|
||||
* @brief This file contains the headers of the interrupt handlers.
|
||||
******************************************************************************
|
||||
*
|
||||
* COPYRIGHT(c) 2018 STMicroelectronics
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_IT_H
|
||||
#define __STM32F4xx_IT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void NMI_Handler(void);
|
||||
void HardFault_Handler(void);
|
||||
void MemManage_Handler(void);
|
||||
void BusFault_Handler(void);
|
||||
void UsageFault_Handler(void);
|
||||
void SVC_Handler(void);
|
||||
void DebugMon_Handler(void);
|
||||
void PendSV_Handler(void);
|
||||
void SysTick_Handler(void);
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_IT_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,303 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
SPI_HandleTypeDef hspi1;
|
||||
|
||||
UART_HandleTypeDef huart1;
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
static void MX_GPIO_Init(void);
|
||||
static void MX_SPI1_Init(void);
|
||||
static void MX_USART1_UART_Init(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
MX_SPI1_Init();
|
||||
MX_USART1_UART_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/**Configure the main internal regulator output voltage
|
||||
*/
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
/**Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 8;
|
||||
RCC_OscInitStruct.PLL.PLLN = 336;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 7;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/**Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SPI1 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_SPI1_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN SPI1_Init 0 */
|
||||
|
||||
/* USER CODE END SPI1_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN SPI1_Init 1 */
|
||||
|
||||
/* USER CODE END SPI1_Init 1 */
|
||||
/* SPI1 parameter configuration*/
|
||||
hspi1.Instance = SPI1;
|
||||
hspi1.Init.Mode = SPI_MODE_MASTER;
|
||||
hspi1.Init.Direction = SPI_DIRECTION_2LINES;
|
||||
hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
|
||||
hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
|
||||
hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
|
||||
hspi1.Init.NSS = SPI_NSS_SOFT;
|
||||
hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
|
||||
hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||||
hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||
hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||||
hspi1.Init.CRCPolynomial = 10;
|
||||
if (HAL_SPI_Init(&hspi1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN SPI1_Init 2 */
|
||||
|
||||
/* USER CODE END SPI1_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USART1 Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_USART1_UART_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN USART1_Init 0 */
|
||||
|
||||
/* USER CODE END USART1_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN USART1_Init 1 */
|
||||
|
||||
/* USER CODE END USART1_Init 1 */
|
||||
huart1.Instance = USART1;
|
||||
huart1.Init.BaudRate = 115200;
|
||||
huart1.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart1.Init.StopBits = UART_STOPBITS_1;
|
||||
huart1.Init.Parity = UART_PARITY_NONE;
|
||||
huart1.Init.Mode = UART_MODE_TX_RX;
|
||||
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
if (HAL_UART_Init(&huart1) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN USART1_Init 2 */
|
||||
|
||||
/* USER CODE END USART1_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief GPIO Initialization Function
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void MX_GPIO_Init(void)
|
||||
{
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOH_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,254 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : stm32f4xx_hal_msp.c
|
||||
* Description : This file provides code for the MSP Initialization
|
||||
* and de-Initialization codes.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Define */
|
||||
|
||||
/* USER CODE END Define */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Macro */
|
||||
|
||||
/* USER CODE END Macro */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* External functions --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ExternalFunctions */
|
||||
|
||||
/* USER CODE END ExternalFunctions */
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
/**
|
||||
* Initializes the Global MSP.
|
||||
*/
|
||||
void HAL_MspInit(void)
|
||||
{
|
||||
/* USER CODE BEGIN MspInit 0 */
|
||||
|
||||
/* USER CODE END MspInit 0 */
|
||||
|
||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_0);
|
||||
|
||||
/* System interrupt init*/
|
||||
|
||||
/* USER CODE BEGIN MspInit 1 */
|
||||
|
||||
/* USER CODE END MspInit 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SPI MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param hspi: SPI handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(hspi->Instance==SPI1)
|
||||
{
|
||||
/* USER CODE BEGIN SPI1_MspInit 0 */
|
||||
|
||||
/* USER CODE END SPI1_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_SPI1_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
/**SPI1 GPIO Configuration
|
||||
PA5 ------> SPI1_SCK
|
||||
PA6 ------> SPI1_MISO
|
||||
PA7 ------> SPI1_MOSI
|
||||
*/
|
||||
GPIO_InitStruct.Pin = SPI1_SCK_Pin|SPI1_MISO_Pin|SPI1_MOSI_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN SPI1_MspInit 1 */
|
||||
|
||||
/* USER CODE END SPI1_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SPI MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param hspi: SPI handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
|
||||
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
|
||||
{
|
||||
|
||||
if(hspi->Instance==SPI1)
|
||||
{
|
||||
/* USER CODE BEGIN SPI1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END SPI1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_SPI1_CLK_DISABLE();
|
||||
|
||||
/**SPI1 GPIO Configuration
|
||||
PA5 ------> SPI1_SCK
|
||||
PA6 ------> SPI1_MISO
|
||||
PA7 ------> SPI1_MOSI
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, SPI1_SCK_Pin|SPI1_MISO_Pin|SPI1_MOSI_Pin);
|
||||
|
||||
/* USER CODE BEGIN SPI1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END SPI1_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief UART MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param huart: UART handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(huart->Instance==USART1)
|
||||
{
|
||||
/* USER CODE BEGIN USART1_MspInit 0 */
|
||||
|
||||
/* USER CODE END USART1_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_USART1_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/**USART1 GPIO Configuration
|
||||
PB6 ------> USART1_TX
|
||||
PB7 ------> USART1_RX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN USART1_MspInit 1 */
|
||||
|
||||
/* USER CODE END USART1_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief UART MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param huart: UART handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
|
||||
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
||||
{
|
||||
|
||||
if(huart->Instance==USART1)
|
||||
{
|
||||
/* USER CODE BEGIN USART1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END USART1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_USART1_CLK_DISABLE();
|
||||
|
||||
/**USART1 GPIO Configuration
|
||||
PB6 ------> USART1_TX
|
||||
PB7 ------> USART1_RX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_7);
|
||||
|
||||
/* USER CODE BEGIN USART1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END USART1_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,217 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_it.c
|
||||
* @brief Interrupt Service Routines.
|
||||
******************************************************************************
|
||||
*
|
||||
* COPYRIGHT(c) 2018 STMicroelectronics
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "stm32f4xx_it.h"
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EV */
|
||||
|
||||
/* USER CODE END EV */
|
||||
|
||||
/******************************************************************************/
|
||||
/* Cortex-M4 Processor Interruption and Exception Handlers */
|
||||
/******************************************************************************/
|
||||
/**
|
||||
* @brief This function handles Non maskable interrupt.
|
||||
*/
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Hard fault interrupt.
|
||||
*/
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN HardFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END HardFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
|
||||
/* USER CODE END W1_HardFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Memory management fault.
|
||||
*/
|
||||
void MemManage_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN MemoryManagement_IRQn 0 */
|
||||
|
||||
/* USER CODE END MemoryManagement_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
|
||||
/* USER CODE END W1_MemoryManagement_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pre-fetch fault, memory access fault.
|
||||
*/
|
||||
void BusFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN BusFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END BusFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_BusFault_IRQn 0 */
|
||||
/* USER CODE END W1_BusFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Undefined instruction or illegal state.
|
||||
*/
|
||||
void UsageFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN UsageFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END UsageFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_UsageFault_IRQn 0 */
|
||||
/* USER CODE END W1_UsageFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System service call via SWI instruction.
|
||||
*/
|
||||
void SVC_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SVCall_IRQn 0 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 0 */
|
||||
/* USER CODE BEGIN SVCall_IRQn 1 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Debug monitor.
|
||||
*/
|
||||
void DebugMon_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 0 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 0 */
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pendable request for system service.
|
||||
*/
|
||||
void PendSV_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN PendSV_IRQn 0 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 0 */
|
||||
/* USER CODE BEGIN PendSV_IRQn 1 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System tick timer.
|
||||
*/
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SysTick_IRQn 0 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 0 */
|
||||
HAL_IncTick();
|
||||
/* USER CODE BEGIN SysTick_IRQn 1 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 1 */
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* STM32F4xx Peripheral Interrupt Handlers */
|
||||
/* Add here the Interrupt Handlers for the used peripherals. */
|
||||
/* For the available peripheral interrupt handler names, */
|
||||
/* please refer to the startup file (startup_stm32f4xx.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,60 @@
|
||||
menu "Hardware Drivers Config"
|
||||
|
||||
config SOC_STM32F407VG
|
||||
bool
|
||||
select SOC_SERIES_STM32F4
|
||||
default y
|
||||
|
||||
menu "Onboard Peripheral Drivers"
|
||||
|
||||
endmenu
|
||||
|
||||
menu "On-chip Peripheral Drivers"
|
||||
|
||||
config BSP_USING_GPIO
|
||||
bool "Enable GPIO"
|
||||
select RT_USING_PIN
|
||||
default y
|
||||
|
||||
config BSP_USING_UART1
|
||||
bool "Enable UART1"
|
||||
select RT_USING_SERIAL
|
||||
default y
|
||||
|
||||
config BSP_UART_USING_DMA_RX
|
||||
bool "Enable UART RX DMA support"
|
||||
default n
|
||||
|
||||
config BSP_USING_SPI1
|
||||
bool "Enable SPI1 BUS"
|
||||
select RT_USING_SPI
|
||||
default n
|
||||
|
||||
config BSP_SPI_USING_DMA
|
||||
bool "Enable SPI DMA support"
|
||||
default n
|
||||
|
||||
menuconfig BSP_USING_I2C1
|
||||
bool "Enable I2C1 BUS (software simulation)"
|
||||
default n
|
||||
select RT_USING_I2C
|
||||
select RT_USING_I2C_BITOPS
|
||||
select RT_USING_PIN
|
||||
if BSP_USING_I2C1
|
||||
config BSP_I2C1_SCL_PIN
|
||||
int "i2c1 scl pin number"
|
||||
range 1 216
|
||||
default 24
|
||||
config BSP_I2C1_SDA_PIN
|
||||
int "I2C1 sda pin number"
|
||||
range 1 216
|
||||
default 25
|
||||
endif
|
||||
|
||||
endmenu
|
||||
|
||||
menu "Board extended module Drivers"
|
||||
|
||||
endmenu
|
||||
|
||||
endmenu
|
||||
@@ -0,0 +1,30 @@
|
||||
import os
|
||||
import rtconfig
|
||||
from building import *
|
||||
|
||||
Import('SDK_LIB')
|
||||
|
||||
cwd = GetCurrentDir()
|
||||
|
||||
# add general drivers
|
||||
src = Split('''
|
||||
board.c
|
||||
CubeMX_Config/Src/stm32f4xx_hal_msp.c
|
||||
''')
|
||||
|
||||
path = [cwd]
|
||||
path += [cwd + '/CubeMX_Config/Inc']
|
||||
|
||||
startup_path_prefix = SDK_LIB
|
||||
|
||||
if rtconfig.CROSS_TOOL == 'gcc':
|
||||
src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/startup_stm32f407xx.s']
|
||||
elif rtconfig.CROSS_TOOL == 'keil':
|
||||
src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/arm/startup_stm32f407xx.s']
|
||||
elif rtconfig.CROSS_TOOL == 'iar':
|
||||
src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/iar/startup_stm32f407xx.s']
|
||||
|
||||
CPPDEFINES = ['STM32F407xx']
|
||||
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
|
||||
|
||||
Return('group')
|
||||
@@ -0,0 +1,51 @@
|
||||
/*
|
||||
* Copyright (c) 2006-2018, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2018-11-06 SummerGift change to new framework
|
||||
*/
|
||||
|
||||
#include "board.h"
|
||||
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/**Configure the main internal regulator output voltage
|
||||
*/
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
/**Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 8;
|
||||
RCC_OscInitStruct.PLL.PLLN = 336;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 7;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/**Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@@ -0,0 +1,37 @@
|
||||
/*
|
||||
* Copyright (c) 2006-2018, RT-Thread Development Team
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Change Logs:
|
||||
* Date Author Notes
|
||||
* 2018-11-5 misonyo change to new framework
|
||||
*/
|
||||
|
||||
#ifndef __BOARD_H__
|
||||
#define __BOARD_H__
|
||||
|
||||
#include <rtthread.h>
|
||||
#include <stm32f4xx.h>
|
||||
#include "drv_common.h"
|
||||
|
||||
#define STM32_SRAM_SIZE (128)
|
||||
#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024)
|
||||
|
||||
#if defined(__CC_ARM) || defined(__CLANG_ARM)
|
||||
extern int Image$$RW_IRAM1$$ZI$$Limit;
|
||||
#define HEAP_BEGIN (&Image$$RW_IRAM1$$ZI$$Limit)
|
||||
#elif __ICCARM__
|
||||
#pragma section="CSTACK"
|
||||
#define HEAP_BEGIN (__segment_end("CSTACK"))
|
||||
#else
|
||||
extern int __bss_end;
|
||||
#define HEAP_BEGIN (&__bss_end)
|
||||
#endif
|
||||
|
||||
#define HEAP_END STM32_SRAM_END
|
||||
|
||||
void SystemClock_Config(void);
|
||||
|
||||
#endif
|
||||
|
||||
@@ -0,0 +1,30 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
|
||||
define symbol __ICFEDIT_region_RAM1_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM1_end__ = 0x2001FFFF;
|
||||
define symbol __ICFEDIT_region_RAM2_start__ = 0x10000000;
|
||||
define symbol __ICFEDIT_region_RAM2_end__ = 0x1000FFFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x0400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x0000;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM1_region = mem:[from __ICFEDIT_region_RAM1_start__ to __ICFEDIT_region_RAM1_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM1_region { readwrite, last block CSTACK };
|
||||
@@ -0,0 +1,145 @@
|
||||
/*
|
||||
* linker script for STM32F4xx with GNU ld
|
||||
* bernard.xiong 2009-10-14
|
||||
*/
|
||||
|
||||
/* Program Entry, set to mark it as "used" and avoid gc */
|
||||
MEMORY
|
||||
{
|
||||
CODE (rx) : ORIGIN = 0x08000000, LENGTH = 1024k /* 1024KB flash */
|
||||
RAM1 (rw) : ORIGIN = 0x20000000, LENGTH = 128k /* 128K sram */
|
||||
RAM2 (rw) : ORIGIN = 0x10000000, LENGTH = 64k /* 64K sram */
|
||||
}
|
||||
ENTRY(Reset_Handler)
|
||||
_system_stack_size = 0x200;
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_stext = .;
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
|
||||
. = ALIGN(4);
|
||||
*(.text) /* remaining code */
|
||||
*(.text.*) /* remaining code */
|
||||
*(.rodata) /* read-only data (constants) */
|
||||
*(.rodata*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.gnu.linkonce.t*)
|
||||
|
||||
/* section information for finsh shell */
|
||||
. = ALIGN(4);
|
||||
__fsymtab_start = .;
|
||||
KEEP(*(FSymTab))
|
||||
__fsymtab_end = .;
|
||||
|
||||
. = ALIGN(4);
|
||||
__vsymtab_start = .;
|
||||
KEEP(*(VSymTab))
|
||||
__vsymtab_end = .;
|
||||
|
||||
/* section information for initial. */
|
||||
. = ALIGN(4);
|
||||
__rt_init_start = .;
|
||||
KEEP(*(SORT(.rti_fn*)))
|
||||
__rt_init_end = .;
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .;
|
||||
} > CODE = 0
|
||||
|
||||
/* .ARM.exidx is sorted, so has to go in its own output section. */
|
||||
__exidx_start = .;
|
||||
.ARM.exidx :
|
||||
{
|
||||
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
|
||||
|
||||
/* This is used by the startup in order to initialize the .data secion */
|
||||
_sidata = .;
|
||||
} > CODE
|
||||
__exidx_end = .;
|
||||
|
||||
/* .data section which is used for initialized data */
|
||||
|
||||
.data : AT (_sidata)
|
||||
{
|
||||
. = ALIGN(4);
|
||||
/* This is used by the startup in order to initialize the .data secion */
|
||||
_sdata = . ;
|
||||
|
||||
*(.data)
|
||||
*(.data.*)
|
||||
*(.gnu.linkonce.d*)
|
||||
|
||||
. = ALIGN(4);
|
||||
/* This is used by the startup in order to initialize the .data secion */
|
||||
_edata = . ;
|
||||
} >RAM1
|
||||
|
||||
.stack :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sstack = .;
|
||||
. = . + _system_stack_size;
|
||||
. = ALIGN(4);
|
||||
_estack = .;
|
||||
} >RAM1
|
||||
|
||||
__bss_start = .;
|
||||
.bss :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
/* This is used by the startup in order to initialize the .bss secion */
|
||||
_sbss = .;
|
||||
|
||||
*(.bss)
|
||||
*(.bss.*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
/* This is used by the startup in order to initialize the .bss secion */
|
||||
_ebss = . ;
|
||||
|
||||
*(.bss.init)
|
||||
} > RAM1
|
||||
__bss_end = .;
|
||||
|
||||
_end = .;
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
/* DWARF debug sections.
|
||||
* Symbols in the DWARF debugging sections are relative to the beginning
|
||||
* of the section so we begin them at 0. */
|
||||
/* DWARF 1 */
|
||||
.debug 0 : { *(.debug) }
|
||||
.line 0 : { *(.line) }
|
||||
/* GNU DWARF 1 extensions */
|
||||
.debug_srcinfo 0 : { *(.debug_srcinfo) }
|
||||
.debug_sfnames 0 : { *(.debug_sfnames) }
|
||||
/* DWARF 1.1 and DWARF 2 */
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
/* DWARF 2 */
|
||||
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_frame 0 : { *(.debug_frame) }
|
||||
.debug_str 0 : { *(.debug_str) }
|
||||
.debug_loc 0 : { *(.debug_loc) }
|
||||
.debug_macinfo 0 : { *(.debug_macinfo) }
|
||||
/* SGI/MIPS DWARF 2 extensions */
|
||||
.debug_weaknames 0 : { *(.debug_weaknames) }
|
||||
.debug_funcnames 0 : { *(.debug_funcnames) }
|
||||
.debug_typenames 0 : { *(.debug_typenames) }
|
||||
.debug_varnames 0 : { *(.debug_varnames) }
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
; *************************************************************
|
||||
; *** Scatter-Loading Description File generated by uVision ***
|
||||
; *************************************************************
|
||||
|
||||
LR_IROM1 0x08000000 0x00100000 { ; load region size_region
|
||||
ER_IROM1 0x08000000 0x00100000 { ; load address = execution address
|
||||
*.o (RESET, +First)
|
||||
*(InRoot$$Sections)
|
||||
.ANY (+RO)
|
||||
}
|
||||
RW_IRAM1 0x20000000 0x00020000 { ; RW data
|
||||
.ANY (+RW +ZI)
|
||||
}
|
||||
}
|
||||
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 380 KiB |
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,10 @@
|
||||
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||
|
||||
<workspace>
|
||||
<project>
|
||||
<path>$WS_DIR$\project.ewp</path>
|
||||
</project>
|
||||
<batchBuild/>
|
||||
</workspace>
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,171 @@
|
||||
#ifndef RT_CONFIG_H__
|
||||
#define RT_CONFIG_H__
|
||||
|
||||
/* Automatically generated file; DO NOT EDIT. */
|
||||
/* RT-Thread Configuration */
|
||||
|
||||
/* RT-Thread Kernel */
|
||||
|
||||
#define RT_NAME_MAX 8
|
||||
#define RT_ALIGN_SIZE 4
|
||||
#define RT_THREAD_PRIORITY_32
|
||||
#define RT_THREAD_PRIORITY_MAX 32
|
||||
#define RT_TICK_PER_SECOND 1000
|
||||
#define RT_USING_OVERFLOW_CHECK
|
||||
#define RT_USING_HOOK
|
||||
#define RT_USING_IDLE_HOOK
|
||||
#define RT_IDEL_HOOK_LIST_SIZE 4
|
||||
#define IDLE_THREAD_STACK_SIZE 256
|
||||
#define RT_DEBUG
|
||||
|
||||
/* Inter-Thread communication */
|
||||
|
||||
#define RT_USING_SEMAPHORE
|
||||
#define RT_USING_MUTEX
|
||||
#define RT_USING_EVENT
|
||||
#define RT_USING_MAILBOX
|
||||
#define RT_USING_MESSAGEQUEUE
|
||||
|
||||
/* Memory Management */
|
||||
|
||||
#define RT_USING_MEMPOOL
|
||||
#define RT_USING_SMALL_MEM
|
||||
#define RT_USING_HEAP
|
||||
|
||||
/* Kernel Device Object */
|
||||
|
||||
#define RT_USING_DEVICE
|
||||
#define RT_USING_CONSOLE
|
||||
#define RT_CONSOLEBUF_SIZE 128
|
||||
#define RT_CONSOLE_DEVICE_NAME "uart1"
|
||||
#define RT_VER_NUM 0x40000
|
||||
#define ARCH_ARM
|
||||
#define ARCH_ARM_CORTEX_M
|
||||
#define ARCH_ARM_CORTEX_M4
|
||||
|
||||
/* RT-Thread Components */
|
||||
|
||||
#define RT_USING_COMPONENTS_INIT
|
||||
#define RT_USING_USER_MAIN
|
||||
#define RT_MAIN_THREAD_STACK_SIZE 2048
|
||||
#define RT_MAIN_THREAD_PRIORITY 10
|
||||
|
||||
/* C++ features */
|
||||
|
||||
|
||||
/* Command shell */
|
||||
|
||||
#define RT_USING_FINSH
|
||||
#define FINSH_THREAD_NAME "tshell"
|
||||
#define FINSH_USING_HISTORY
|
||||
#define FINSH_HISTORY_LINES 5
|
||||
#define FINSH_USING_SYMTAB
|
||||
#define FINSH_USING_DESCRIPTION
|
||||
#define FINSH_THREAD_PRIORITY 20
|
||||
#define FINSH_THREAD_STACK_SIZE 2048
|
||||
#define FINSH_CMD_SIZE 80
|
||||
#define FINSH_USING_MSH
|
||||
#define FINSH_USING_MSH_DEFAULT
|
||||
#define FINSH_USING_MSH_ONLY
|
||||
#define FINSH_ARG_MAX 10
|
||||
|
||||
/* Device virtual file system */
|
||||
|
||||
|
||||
/* Device Drivers */
|
||||
|
||||
#define RT_USING_DEVICE_IPC
|
||||
#define RT_PIPE_BUFSZ 512
|
||||
#define RT_USING_SERIAL
|
||||
#define RT_SERIAL_USING_DMA
|
||||
#define RT_USING_PIN
|
||||
|
||||
/* Using WiFi */
|
||||
|
||||
|
||||
/* Using USB */
|
||||
|
||||
|
||||
/* POSIX layer and C standard library */
|
||||
|
||||
|
||||
/* Network */
|
||||
|
||||
/* Socket abstraction layer */
|
||||
|
||||
|
||||
/* light weight TCP/IP stack */
|
||||
|
||||
|
||||
/* Modbus master and slave stack */
|
||||
|
||||
|
||||
/* AT commands */
|
||||
|
||||
|
||||
/* VBUS(Virtual Software BUS) */
|
||||
|
||||
|
||||
/* Utilities */
|
||||
|
||||
|
||||
/* ARM CMSIS */
|
||||
|
||||
|
||||
/* RT-Thread online packages */
|
||||
|
||||
/* IoT - internet of things */
|
||||
|
||||
|
||||
/* Wi-Fi */
|
||||
|
||||
/* Marvell WiFi */
|
||||
|
||||
|
||||
/* Wiced WiFi */
|
||||
|
||||
|
||||
/* IoT Cloud */
|
||||
|
||||
|
||||
/* security packages */
|
||||
|
||||
|
||||
/* language packages */
|
||||
|
||||
|
||||
/* multimedia packages */
|
||||
|
||||
|
||||
/* tools packages */
|
||||
|
||||
|
||||
/* system packages */
|
||||
|
||||
|
||||
/* peripheral libraries and drivers */
|
||||
|
||||
|
||||
/* miscellaneous packages */
|
||||
|
||||
|
||||
/* samples: kernel and components samples */
|
||||
|
||||
#define SOC_FAMILY_STM32
|
||||
#define SOC_SERIES_STM32F4
|
||||
|
||||
/* Hardware Drivers Config */
|
||||
|
||||
#define SOC_STM32F407VG
|
||||
|
||||
/* Onboard Peripheral Drivers */
|
||||
|
||||
/* On-chip Peripheral Drivers */
|
||||
|
||||
#define BSP_USING_GPIO
|
||||
#define BSP_USING_UART1
|
||||
|
||||
/* Board extended module Drivers */
|
||||
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,134 @@
|
||||
import os
|
||||
|
||||
# toolchains options
|
||||
ARCH='arm'
|
||||
CPU='cortex-m4'
|
||||
CROSS_TOOL='gcc'
|
||||
|
||||
# bsp lib config
|
||||
BSP_LIBRARY_TYPE = None
|
||||
|
||||
if os.getenv('RTT_CC'):
|
||||
CROSS_TOOL = os.getenv('RTT_CC')
|
||||
if os.getenv('RTT_ROOT'):
|
||||
RTT_ROOT = os.getenv('RTT_ROOT')
|
||||
|
||||
# cross_tool provides the cross compiler
|
||||
# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
|
||||
if CROSS_TOOL == 'gcc':
|
||||
PLATFORM = 'gcc'
|
||||
EXEC_PATH = r'C:\Users\XXYYZZ'
|
||||
elif CROSS_TOOL == 'keil':
|
||||
PLATFORM = 'armcc'
|
||||
EXEC_PATH = r'C:/Keil_v5'
|
||||
elif CROSS_TOOL == 'iar':
|
||||
PLATFORM = 'iar'
|
||||
EXEC_PATH = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.0'
|
||||
|
||||
if os.getenv('RTT_EXEC_PATH'):
|
||||
EXEC_PATH = os.getenv('RTT_EXEC_PATH')
|
||||
|
||||
BUILD = 'debug'
|
||||
|
||||
if PLATFORM == 'gcc':
|
||||
# toolchains
|
||||
PREFIX = 'arm-none-eabi-'
|
||||
CC = PREFIX + 'gcc'
|
||||
AS = PREFIX + 'gcc'
|
||||
AR = PREFIX + 'ar'
|
||||
CXX = PREFIX + 'g++'
|
||||
LINK = PREFIX + 'gcc'
|
||||
TARGET_EXT = 'elf'
|
||||
SIZE = PREFIX + 'size'
|
||||
OBJDUMP = PREFIX + 'objdump'
|
||||
OBJCPY = PREFIX + 'objcopy'
|
||||
|
||||
DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections'
|
||||
CFLAGS = DEVICE + ' -std=c99 -Dgcc'
|
||||
AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb '
|
||||
LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rtthread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds'
|
||||
|
||||
CPATH = ''
|
||||
LPATH = ''
|
||||
|
||||
if BUILD == 'debug':
|
||||
CFLAGS += ' -O0 -gdwarf-2 -g'
|
||||
AFLAGS += ' -gdwarf-2'
|
||||
else:
|
||||
CFLAGS += ' -O2'
|
||||
|
||||
POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
|
||||
|
||||
elif PLATFORM == 'armcc':
|
||||
# toolchains
|
||||
CC = 'armcc'
|
||||
AS = 'armasm'
|
||||
AR = 'armar'
|
||||
LINK = 'armlink'
|
||||
TARGET_EXT = 'axf'
|
||||
|
||||
DEVICE = ' --cpu Cortex-M4.fp '
|
||||
CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99'
|
||||
AFLAGS = DEVICE + ' --apcs=interwork '
|
||||
LFLAGS = DEVICE + ' --scatter "board\linker_scripts\link.sct" --info sizes --info totals --info unused --info veneers --list rtthread.map --strict'
|
||||
CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include'
|
||||
LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib'
|
||||
|
||||
CFLAGS += ' -D__MICROLIB '
|
||||
AFLAGS += ' --pd "__MICROLIB SETA 1" '
|
||||
LFLAGS += ' --library_type=microlib '
|
||||
EXEC_PATH += '/ARM/ARMCC/bin/'
|
||||
|
||||
if BUILD == 'debug':
|
||||
CFLAGS += ' -g -O0'
|
||||
AFLAGS += ' -g'
|
||||
else:
|
||||
CFLAGS += ' -O2'
|
||||
|
||||
POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
|
||||
|
||||
elif PLATFORM == 'iar':
|
||||
# toolchains
|
||||
CC = 'iccarm'
|
||||
AS = 'iasmarm'
|
||||
AR = 'iarchive'
|
||||
LINK = 'ilinkarm'
|
||||
TARGET_EXT = 'out'
|
||||
|
||||
DEVICE = '-Dewarm'
|
||||
|
||||
CFLAGS = DEVICE
|
||||
CFLAGS += ' --diag_suppress Pa050'
|
||||
CFLAGS += ' --no_cse'
|
||||
CFLAGS += ' --no_unroll'
|
||||
CFLAGS += ' --no_inline'
|
||||
CFLAGS += ' --no_code_motion'
|
||||
CFLAGS += ' --no_tbaa'
|
||||
CFLAGS += ' --no_clustering'
|
||||
CFLAGS += ' --no_scheduling'
|
||||
CFLAGS += ' --endian=little'
|
||||
CFLAGS += ' --cpu=Cortex-M4'
|
||||
CFLAGS += ' -e'
|
||||
CFLAGS += ' --fpu=VFPv4_sp'
|
||||
CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"'
|
||||
CFLAGS += ' --silent'
|
||||
|
||||
AFLAGS = DEVICE
|
||||
AFLAGS += ' -s+'
|
||||
AFLAGS += ' -w+'
|
||||
AFLAGS += ' -r'
|
||||
AFLAGS += ' --cpu Cortex-M4'
|
||||
AFLAGS += ' --fpu VFPv4_sp'
|
||||
AFLAGS += ' -S'
|
||||
|
||||
if BUILD == 'debug':
|
||||
CFLAGS += ' --debug'
|
||||
CFLAGS += ' -On'
|
||||
else:
|
||||
CFLAGS += ' -Oh'
|
||||
|
||||
LFLAGS = ' --config "board/linker_scripts/link.icf"'
|
||||
LFLAGS += ' --entry __iar_program_start'
|
||||
|
||||
EXEC_PATH = EXEC_PATH + '/arm/bin/'
|
||||
POST_ACTION = 'ielftool --bin $TARGET rtthread.bin'
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,10 @@
|
||||
<?xml version="1.0" encoding="iso-8859-1"?>
|
||||
|
||||
<workspace>
|
||||
<project>
|
||||
<path>$WS_DIR$\template.ewp</path>
|
||||
</project>
|
||||
<batchBuild/>
|
||||
</workspace>
|
||||
|
||||
|
||||
@@ -0,0 +1,184 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||
<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
|
||||
|
||||
<SchemaVersion>1.0</SchemaVersion>
|
||||
|
||||
<Header>### uVision Project, (C) Keil Software</Header>
|
||||
|
||||
<Extensions>
|
||||
<cExt>*.c</cExt>
|
||||
<aExt>*.s*; *.src; *.a*</aExt>
|
||||
<oExt>*.obj</oExt>
|
||||
<lExt>*.lib</lExt>
|
||||
<tExt>*.txt; *.h; *.inc</tExt>
|
||||
<pExt>*.plm</pExt>
|
||||
<CppX>*.cpp</CppX>
|
||||
</Extensions>
|
||||
|
||||
<DaveTm>
|
||||
<dwLowDateTime>0</dwLowDateTime>
|
||||
<dwHighDateTime>0</dwHighDateTime>
|
||||
</DaveTm>
|
||||
|
||||
<Target>
|
||||
<TargetName>rtthread</TargetName>
|
||||
<ToolsetNumber>0x4</ToolsetNumber>
|
||||
<ToolsetName>ARM-ADS</ToolsetName>
|
||||
<TargetOption>
|
||||
<CLKADS>25000000</CLKADS>
|
||||
<OPTTT>
|
||||
<gFlags>1</gFlags>
|
||||
<BeepAtEnd>1</BeepAtEnd>
|
||||
<RunSim>1</RunSim>
|
||||
<RunTarget>0</RunTarget>
|
||||
</OPTTT>
|
||||
<OPTHX>
|
||||
<HexSelection>1</HexSelection>
|
||||
<FlashByte>65535</FlashByte>
|
||||
<HexRangeLowAddress>0</HexRangeLowAddress>
|
||||
<HexRangeHighAddress>0</HexRangeHighAddress>
|
||||
<HexOffset>0</HexOffset>
|
||||
</OPTHX>
|
||||
<OPTLEX>
|
||||
<PageWidth>79</PageWidth>
|
||||
<PageLength>66</PageLength>
|
||||
<TabStop>8</TabStop>
|
||||
<ListingPath>.\build\keil\List\</ListingPath>
|
||||
</OPTLEX>
|
||||
<ListingPage>
|
||||
<CreateCListing>1</CreateCListing>
|
||||
<CreateAListing>1</CreateAListing>
|
||||
<CreateLListing>1</CreateLListing>
|
||||
<CreateIListing>0</CreateIListing>
|
||||
<AsmCond>1</AsmCond>
|
||||
<AsmSymb>1</AsmSymb>
|
||||
<AsmXref>0</AsmXref>
|
||||
<CCond>1</CCond>
|
||||
<CCode>0</CCode>
|
||||
<CListInc>0</CListInc>
|
||||
<CSymb>0</CSymb>
|
||||
<LinkerCodeListing>0</LinkerCodeListing>
|
||||
</ListingPage>
|
||||
<OPTXL>
|
||||
<LMap>1</LMap>
|
||||
<LComments>1</LComments>
|
||||
<LGenerateSymbols>1</LGenerateSymbols>
|
||||
<LLibSym>1</LLibSym>
|
||||
<LLines>1</LLines>
|
||||
<LLocSym>1</LLocSym>
|
||||
<LPubSym>1</LPubSym>
|
||||
<LXref>0</LXref>
|
||||
<LExpSel>0</LExpSel>
|
||||
</OPTXL>
|
||||
<OPTFL>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<IsCurrentTarget>1</IsCurrentTarget>
|
||||
</OPTFL>
|
||||
<CpuCode>255</CpuCode>
|
||||
<Books>
|
||||
<Book>
|
||||
<Number>0</Number>
|
||||
<Title>Datasheet</Title>
|
||||
<Path>DATASHTS\ST\STM32F4xx\DM00037051.pdf</Path>
|
||||
</Book>
|
||||
<Book>
|
||||
<Number>1</Number>
|
||||
<Title>Reference Manual</Title>
|
||||
<Path>DATASHTS\ST\STM32F4xx\DM00031020.pdf</Path>
|
||||
</Book>
|
||||
<Book>
|
||||
<Number>2</Number>
|
||||
<Title>Technical Reference Manual</Title>
|
||||
<Path>datashts\arm\cortex_m4\r0p1\DDI0439C_CORTEX_M4_R0P1_TRM.PDF</Path>
|
||||
</Book>
|
||||
<Book>
|
||||
<Number>3</Number>
|
||||
<Title>Generic User Guide</Title>
|
||||
<Path>datashts\arm\cortex_m4\r0p1\DUI0553A_CORTEX_M4_DGUG.PDF</Path>
|
||||
</Book>
|
||||
</Books>
|
||||
<DebugOpt>
|
||||
<uSim>0</uSim>
|
||||
<uTrg>1</uTrg>
|
||||
<sLdApp>1</sLdApp>
|
||||
<sGomain>1</sGomain>
|
||||
<sRbreak>1</sRbreak>
|
||||
<sRwatch>1</sRwatch>
|
||||
<sRmem>1</sRmem>
|
||||
<sRfunc>1</sRfunc>
|
||||
<sRbox>1</sRbox>
|
||||
<tLdApp>1</tLdApp>
|
||||
<tGomain>1</tGomain>
|
||||
<tRbreak>1</tRbreak>
|
||||
<tRwatch>1</tRwatch>
|
||||
<tRmem>1</tRmem>
|
||||
<tRfunc>0</tRfunc>
|
||||
<tRbox>1</tRbox>
|
||||
<tRtrace>0</tRtrace>
|
||||
<sRSysVw>1</sRSysVw>
|
||||
<tRSysVw>1</tRSysVw>
|
||||
<tPdscDbg>0</tPdscDbg>
|
||||
<sRunDeb>0</sRunDeb>
|
||||
<sLrtime>0</sLrtime>
|
||||
<nTsel>11</nTsel>
|
||||
<sDll></sDll>
|
||||
<sDllPa></sDllPa>
|
||||
<sDlgDll></sDlgDll>
|
||||
<sDlgPa></sDlgPa>
|
||||
<sIfile></sIfile>
|
||||
<tDll></tDll>
|
||||
<tDllPa></tDllPa>
|
||||
<tDlgDll></tDlgDll>
|
||||
<tDlgPa></tDlgPa>
|
||||
<tIfile></tIfile>
|
||||
<pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
|
||||
</DebugOpt>
|
||||
<TargetDriverDllRegistry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>ST-LINKIII-KEIL_SWO</Key>
|
||||
<Name>-U -O207 -S0 -C0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000</Name>
|
||||
</SetRegEntry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>UL2CM3</Key>
|
||||
<Name>-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</Name>
|
||||
</SetRegEntry>
|
||||
</TargetDriverDllRegistry>
|
||||
<Breakpoint/>
|
||||
<Tracepoint>
|
||||
<THDelay>0</THDelay>
|
||||
</Tracepoint>
|
||||
<DebugFlag>
|
||||
<trace>0</trace>
|
||||
<periodic>0</periodic>
|
||||
<aLwin>0</aLwin>
|
||||
<aCover>0</aCover>
|
||||
<aSer1>0</aSer1>
|
||||
<aSer2>0</aSer2>
|
||||
<aPa>0</aPa>
|
||||
<viewmode>0</viewmode>
|
||||
<vrSel>0</vrSel>
|
||||
<aSym>0</aSym>
|
||||
<aTbox>0</aTbox>
|
||||
<AscS1>0</AscS1>
|
||||
<AscS2>0</AscS2>
|
||||
<AscS3>0</AscS3>
|
||||
<aSer3>0</aSer3>
|
||||
<eProf>0</eProf>
|
||||
<aLa>0</aLa>
|
||||
<aPa1>0</aPa1>
|
||||
<AscS4>0</AscS4>
|
||||
<aSer4>0</aSer4>
|
||||
<StkLoc>0</StkLoc>
|
||||
<TrcWin>0</TrcWin>
|
||||
<newCpu>0</newCpu>
|
||||
<uProt>0</uProt>
|
||||
</DebugFlag>
|
||||
<LintExecutable></LintExecutable>
|
||||
<LintConfigFile></LintConfigFile>
|
||||
</TargetOption>
|
||||
</Target>
|
||||
|
||||
</ProjectOpt>
|
||||
@@ -0,0 +1,183 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||
<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
|
||||
|
||||
<SchemaVersion>1.0</SchemaVersion>
|
||||
|
||||
<Header>### uVision Project, (C) Keil Software</Header>
|
||||
|
||||
<Extensions>
|
||||
<cExt>*.c</cExt>
|
||||
<aExt>*.s*; *.src; *.a*</aExt>
|
||||
<oExt>*.obj; *.o</oExt>
|
||||
<lExt>*.lib</lExt>
|
||||
<tExt>*.txt; *.h; *.inc</tExt>
|
||||
<pExt>*.plm</pExt>
|
||||
<CppX>*.cpp</CppX>
|
||||
<nMigrate>0</nMigrate>
|
||||
</Extensions>
|
||||
|
||||
<DaveTm>
|
||||
<dwLowDateTime>0</dwLowDateTime>
|
||||
<dwHighDateTime>0</dwHighDateTime>
|
||||
</DaveTm>
|
||||
|
||||
<Target>
|
||||
<TargetName>rtthread</TargetName>
|
||||
<ToolsetNumber>0x4</ToolsetNumber>
|
||||
<ToolsetName>ARM-ADS</ToolsetName>
|
||||
<TargetOption>
|
||||
<CLKADS>12000000</CLKADS>
|
||||
<OPTTT>
|
||||
<gFlags>1</gFlags>
|
||||
<BeepAtEnd>1</BeepAtEnd>
|
||||
<RunSim>0</RunSim>
|
||||
<RunTarget>1</RunTarget>
|
||||
<RunAbUc>0</RunAbUc>
|
||||
</OPTTT>
|
||||
<OPTHX>
|
||||
<HexSelection>1</HexSelection>
|
||||
<FlashByte>65535</FlashByte>
|
||||
<HexRangeLowAddress>0</HexRangeLowAddress>
|
||||
<HexRangeHighAddress>0</HexRangeHighAddress>
|
||||
<HexOffset>0</HexOffset>
|
||||
</OPTHX>
|
||||
<OPTLEX>
|
||||
<PageWidth>79</PageWidth>
|
||||
<PageLength>66</PageLength>
|
||||
<TabStop>8</TabStop>
|
||||
<ListingPath>.\build\keil\List\</ListingPath>
|
||||
</OPTLEX>
|
||||
<ListingPage>
|
||||
<CreateCListing>1</CreateCListing>
|
||||
<CreateAListing>1</CreateAListing>
|
||||
<CreateLListing>1</CreateLListing>
|
||||
<CreateIListing>0</CreateIListing>
|
||||
<AsmCond>1</AsmCond>
|
||||
<AsmSymb>1</AsmSymb>
|
||||
<AsmXref>0</AsmXref>
|
||||
<CCond>1</CCond>
|
||||
<CCode>0</CCode>
|
||||
<CListInc>0</CListInc>
|
||||
<CSymb>0</CSymb>
|
||||
<LinkerCodeListing>0</LinkerCodeListing>
|
||||
</ListingPage>
|
||||
<OPTXL>
|
||||
<LMap>1</LMap>
|
||||
<LComments>1</LComments>
|
||||
<LGenerateSymbols>1</LGenerateSymbols>
|
||||
<LLibSym>1</LLibSym>
|
||||
<LLines>1</LLines>
|
||||
<LLocSym>1</LLocSym>
|
||||
<LPubSym>1</LPubSym>
|
||||
<LXref>0</LXref>
|
||||
<LExpSel>0</LExpSel>
|
||||
</OPTXL>
|
||||
<OPTFL>
|
||||
<tvExp>0</tvExp>
|
||||
<tvExpOptDlg>0</tvExpOptDlg>
|
||||
<IsCurrentTarget>1</IsCurrentTarget>
|
||||
</OPTFL>
|
||||
<CpuCode>18</CpuCode>
|
||||
<DebugOpt>
|
||||
<uSim>0</uSim>
|
||||
<uTrg>1</uTrg>
|
||||
<sLdApp>1</sLdApp>
|
||||
<sGomain>1</sGomain>
|
||||
<sRbreak>1</sRbreak>
|
||||
<sRwatch>1</sRwatch>
|
||||
<sRmem>1</sRmem>
|
||||
<sRfunc>1</sRfunc>
|
||||
<sRbox>1</sRbox>
|
||||
<tLdApp>1</tLdApp>
|
||||
<tGomain>1</tGomain>
|
||||
<tRbreak>1</tRbreak>
|
||||
<tRwatch>1</tRwatch>
|
||||
<tRmem>1</tRmem>
|
||||
<tRfunc>0</tRfunc>
|
||||
<tRbox>1</tRbox>
|
||||
<tRtrace>0</tRtrace>
|
||||
<sRSysVw>1</sRSysVw>
|
||||
<tRSysVw>1</tRSysVw>
|
||||
<sRunDeb>0</sRunDeb>
|
||||
<sLrtime>0</sLrtime>
|
||||
<bEvRecOn>1</bEvRecOn>
|
||||
<bSchkAxf>0</bSchkAxf>
|
||||
<bTchkAxf>0</bTchkAxf>
|
||||
<nTsel>6</nTsel>
|
||||
<sDll></sDll>
|
||||
<sDllPa></sDllPa>
|
||||
<sDlgDll></sDlgDll>
|
||||
<sDlgPa></sDlgPa>
|
||||
<sIfile></sIfile>
|
||||
<tDll></tDll>
|
||||
<tDllPa></tDllPa>
|
||||
<tDlgDll></tDlgDll>
|
||||
<tDlgPa></tDlgPa>
|
||||
<tIfile></tIfile>
|
||||
<pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
|
||||
</DebugOpt>
|
||||
<TargetDriverDllRegistry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>ST-LINKIII-KEIL_SWO</Key>
|
||||
<Name>-U-O206 -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024.FLM -FS08000000 -FL0100000 -FP0($$Device:STM32F407VGTx$CMSIS\Flash\STM32F4xx_1024.FLM)</Name>
|
||||
</SetRegEntry>
|
||||
<SetRegEntry>
|
||||
<Number>0</Number>
|
||||
<Key>UL2CM3</Key>
|
||||
<Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F407VGTx$CMSIS\Flash\STM32F4xx_1024.FLM))</Name>
|
||||
</SetRegEntry>
|
||||
</TargetDriverDllRegistry>
|
||||
<Breakpoint/>
|
||||
<Tracepoint>
|
||||
<THDelay>0</THDelay>
|
||||
</Tracepoint>
|
||||
<DebugFlag>
|
||||
<trace>0</trace>
|
||||
<periodic>0</periodic>
|
||||
<aLwin>0</aLwin>
|
||||
<aCover>0</aCover>
|
||||
<aSer1>0</aSer1>
|
||||
<aSer2>0</aSer2>
|
||||
<aPa>0</aPa>
|
||||
<viewmode>0</viewmode>
|
||||
<vrSel>0</vrSel>
|
||||
<aSym>0</aSym>
|
||||
<aTbox>0</aTbox>
|
||||
<AscS1>0</AscS1>
|
||||
<AscS2>0</AscS2>
|
||||
<AscS3>0</AscS3>
|
||||
<aSer3>0</aSer3>
|
||||
<eProf>0</eProf>
|
||||
<aLa>0</aLa>
|
||||
<aPa1>0</aPa1>
|
||||
<AscS4>0</AscS4>
|
||||
<aSer4>0</aSer4>
|
||||
<StkLoc>0</StkLoc>
|
||||
<TrcWin>0</TrcWin>
|
||||
<newCpu>0</newCpu>
|
||||
<uProt>0</uProt>
|
||||
</DebugFlag>
|
||||
<LintExecutable></LintExecutable>
|
||||
<LintConfigFile></LintConfigFile>
|
||||
<bLintAuto>0</bLintAuto>
|
||||
<bAutoGenD>0</bAutoGenD>
|
||||
<LntExFlags>0</LntExFlags>
|
||||
<pMisraName></pMisraName>
|
||||
<pszMrule></pszMrule>
|
||||
<pSingCmds></pSingCmds>
|
||||
<pMultCmds></pMultCmds>
|
||||
<pMisraNamep></pMisraNamep>
|
||||
<pszMrulep></pszMrulep>
|
||||
<pSingCmdsp></pSingCmdsp>
|
||||
<pMultCmdsp></pMultCmdsp>
|
||||
<DebugDescription>
|
||||
<Enable>1</Enable>
|
||||
<EnableLog>0</EnableLog>
|
||||
<Protocol>2</Protocol>
|
||||
<DbgClock>10000000</DbgClock>
|
||||
</DebugDescription>
|
||||
</TargetOption>
|
||||
</Target>
|
||||
|
||||
</ProjectOpt>
|
||||
@@ -0,0 +1,407 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
|
||||
|
||||
<SchemaVersion>1.1</SchemaVersion>
|
||||
|
||||
<Header>### uVision Project, (C) Keil Software</Header>
|
||||
|
||||
<Targets>
|
||||
<Target>
|
||||
<TargetName>rtthread</TargetName>
|
||||
<ToolsetNumber>0x4</ToolsetNumber>
|
||||
<ToolsetName>ARM-ADS</ToolsetName>
|
||||
<TargetOption>
|
||||
<TargetCommonOption>
|
||||
<Device>STM32F407VG</Device>
|
||||
<Vendor>STMicroelectronics</Vendor>
|
||||
<Cpu>IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
|
||||
<FlashUtilSpec></FlashUtilSpec>
|
||||
<StartupFile>"Startup\ST\STM32F4xx\startup_stm32f40_41xxx.s" ("STM32F40/41xxx Startup Code")</StartupFile>
|
||||
<FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000)</FlashDriverDll>
|
||||
<DeviceId>6103</DeviceId>
|
||||
<RegisterFile>stm32f4xx.h</RegisterFile>
|
||||
<MemoryEnv></MemoryEnv>
|
||||
<Cmp></Cmp>
|
||||
<Asm></Asm>
|
||||
<Linker></Linker>
|
||||
<OHString></OHString>
|
||||
<InfinionOptionDll></InfinionOptionDll>
|
||||
<SLE66CMisc>-DSTM32F40_41xxx</SLE66CMisc>
|
||||
<SLE66AMisc></SLE66AMisc>
|
||||
<SLE66LinkerMisc></SLE66LinkerMisc>
|
||||
<SFDFile>SFD\ST\STM32F4xx\STM32F40x.sfr</SFDFile>
|
||||
<bCustSvd>0</bCustSvd>
|
||||
<UseEnv>0</UseEnv>
|
||||
<BinPath></BinPath>
|
||||
<IncludePath></IncludePath>
|
||||
<LibPath></LibPath>
|
||||
<RegisterFilePath>ST\STM32F4xx\</RegisterFilePath>
|
||||
<DBRegisterFilePath>ST\STM32F4xx\</DBRegisterFilePath>
|
||||
<TargetStatus>
|
||||
<Error>0</Error>
|
||||
<ExitCodeStop>0</ExitCodeStop>
|
||||
<ButtonStop>0</ButtonStop>
|
||||
<NotGenerated>0</NotGenerated>
|
||||
<InvalidFlash>1</InvalidFlash>
|
||||
</TargetStatus>
|
||||
<OutputDirectory>.\build\keil\Obj\</OutputDirectory>
|
||||
<OutputName>rtthread</OutputName>
|
||||
<CreateExecutable>1</CreateExecutable>
|
||||
<CreateLib>0</CreateLib>
|
||||
<CreateHexFile>0</CreateHexFile>
|
||||
<DebugInformation>1</DebugInformation>
|
||||
<BrowseInformation>0</BrowseInformation>
|
||||
<ListingPath>.\build\keil\List\</ListingPath>
|
||||
<HexFormatSelection>1</HexFormatSelection>
|
||||
<Merge32K>0</Merge32K>
|
||||
<CreateBatchFile>0</CreateBatchFile>
|
||||
<BeforeCompile>
|
||||
<RunUserProg1>0</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name></UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopU1X>0</nStopU1X>
|
||||
<nStopU2X>0</nStopU2X>
|
||||
</BeforeCompile>
|
||||
<BeforeMake>
|
||||
<RunUserProg1>0</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name></UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
</BeforeMake>
|
||||
<AfterMake>
|
||||
<RunUserProg1>1</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
</AfterMake>
|
||||
<SelectedForBatchBuild>0</SelectedForBatchBuild>
|
||||
<SVCSIdString></SVCSIdString>
|
||||
</TargetCommonOption>
|
||||
<CommonProperty>
|
||||
<UseCPPCompiler>0</UseCPPCompiler>
|
||||
<RVCTCodeConst>0</RVCTCodeConst>
|
||||
<RVCTZI>0</RVCTZI>
|
||||
<RVCTOtherData>0</RVCTOtherData>
|
||||
<ModuleSelection>0</ModuleSelection>
|
||||
<IncludeInBuild>1</IncludeInBuild>
|
||||
<AlwaysBuild>0</AlwaysBuild>
|
||||
<GenerateAssemblyFile>0</GenerateAssemblyFile>
|
||||
<AssembleAssemblyFile>0</AssembleAssemblyFile>
|
||||
<PublicsOnly>0</PublicsOnly>
|
||||
<StopOnExitCode>3</StopOnExitCode>
|
||||
<CustomArgument></CustomArgument>
|
||||
<IncludeLibraryModules></IncludeLibraryModules>
|
||||
<ComprImg>1</ComprImg>
|
||||
</CommonProperty>
|
||||
<DllOption>
|
||||
<SimDllName>SARMCM3.DLL</SimDllName>
|
||||
<SimDllArguments>-MPU -REMAP</SimDllArguments>
|
||||
<SimDlgDll>DCM.DLL</SimDlgDll>
|
||||
<SimDlgDllArguments>-pCM4</SimDlgDllArguments>
|
||||
<TargetDllName>SARMCM3.DLL</TargetDllName>
|
||||
<TargetDllArguments>-MPU</TargetDllArguments>
|
||||
<TargetDlgDll>TCM.DLL</TargetDlgDll>
|
||||
<TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
|
||||
</DllOption>
|
||||
<DebugOption>
|
||||
<OPTHX>
|
||||
<HexSelection>1</HexSelection>
|
||||
<HexRangeLowAddress>0</HexRangeLowAddress>
|
||||
<HexRangeHighAddress>0</HexRangeHighAddress>
|
||||
<HexOffset>0</HexOffset>
|
||||
<Oh166RecLen>16</Oh166RecLen>
|
||||
</OPTHX>
|
||||
<Simulator>
|
||||
<UseSimulator>0</UseSimulator>
|
||||
<LoadApplicationAtStartup>1</LoadApplicationAtStartup>
|
||||
<RunToMain>1</RunToMain>
|
||||
<RestoreBreakpoints>1</RestoreBreakpoints>
|
||||
<RestoreWatchpoints>1</RestoreWatchpoints>
|
||||
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
|
||||
<RestoreFunctions>1</RestoreFunctions>
|
||||
<RestoreToolbox>1</RestoreToolbox>
|
||||
<LimitSpeedToRealTime>0</LimitSpeedToRealTime>
|
||||
<RestoreSysVw>1</RestoreSysVw>
|
||||
</Simulator>
|
||||
<Target>
|
||||
<UseTarget>1</UseTarget>
|
||||
<LoadApplicationAtStartup>1</LoadApplicationAtStartup>
|
||||
<RunToMain>1</RunToMain>
|
||||
<RestoreBreakpoints>1</RestoreBreakpoints>
|
||||
<RestoreWatchpoints>1</RestoreWatchpoints>
|
||||
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
|
||||
<RestoreFunctions>0</RestoreFunctions>
|
||||
<RestoreToolbox>1</RestoreToolbox>
|
||||
<RestoreTracepoints>0</RestoreTracepoints>
|
||||
<RestoreSysVw>1</RestoreSysVw>
|
||||
<UsePdscDebugDescription>0</UsePdscDebugDescription>
|
||||
</Target>
|
||||
<RunDebugAfterBuild>0</RunDebugAfterBuild>
|
||||
<TargetSelection>11</TargetSelection>
|
||||
<SimDlls>
|
||||
<CpuDll></CpuDll>
|
||||
<CpuDllArguments></CpuDllArguments>
|
||||
<PeripheralDll></PeripheralDll>
|
||||
<PeripheralDllArguments></PeripheralDllArguments>
|
||||
<InitializationFile></InitializationFile>
|
||||
</SimDlls>
|
||||
<TargetDlls>
|
||||
<CpuDll></CpuDll>
|
||||
<CpuDllArguments></CpuDllArguments>
|
||||
<PeripheralDll></PeripheralDll>
|
||||
<PeripheralDllArguments></PeripheralDllArguments>
|
||||
<InitializationFile></InitializationFile>
|
||||
<Driver>STLink\ST-LINKIII-KEIL_SWO.dll</Driver>
|
||||
</TargetDlls>
|
||||
</DebugOption>
|
||||
<Utilities>
|
||||
<Flash1>
|
||||
<UseTargetDll>1</UseTargetDll>
|
||||
<UseExternalTool>0</UseExternalTool>
|
||||
<RunIndependent>0</RunIndependent>
|
||||
<UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
|
||||
<Capability>1</Capability>
|
||||
<DriverSelection>4096</DriverSelection>
|
||||
</Flash1>
|
||||
<bUseTDR>1</bUseTDR>
|
||||
<Flash2>BIN\UL2CM3.DLL</Flash2>
|
||||
<Flash3>"" ()</Flash3>
|
||||
<Flash4></Flash4>
|
||||
<pFcarmOut></pFcarmOut>
|
||||
<pFcarmGrp></pFcarmGrp>
|
||||
<pFcArmRoot></pFcArmRoot>
|
||||
<FcArmLst>0</FcArmLst>
|
||||
</Utilities>
|
||||
<TargetArmAds>
|
||||
<ArmAdsMisc>
|
||||
<GenerateListings>0</GenerateListings>
|
||||
<asHll>1</asHll>
|
||||
<asAsm>1</asAsm>
|
||||
<asMacX>1</asMacX>
|
||||
<asSyms>1</asSyms>
|
||||
<asFals>1</asFals>
|
||||
<asDbgD>1</asDbgD>
|
||||
<asForm>1</asForm>
|
||||
<ldLst>0</ldLst>
|
||||
<ldmm>1</ldmm>
|
||||
<ldXref>1</ldXref>
|
||||
<BigEnd>0</BigEnd>
|
||||
<AdsALst>1</AdsALst>
|
||||
<AdsACrf>1</AdsACrf>
|
||||
<AdsANop>0</AdsANop>
|
||||
<AdsANot>0</AdsANot>
|
||||
<AdsLLst>1</AdsLLst>
|
||||
<AdsLmap>1</AdsLmap>
|
||||
<AdsLcgr>1</AdsLcgr>
|
||||
<AdsLsym>1</AdsLsym>
|
||||
<AdsLszi>1</AdsLszi>
|
||||
<AdsLtoi>1</AdsLtoi>
|
||||
<AdsLsun>1</AdsLsun>
|
||||
<AdsLven>1</AdsLven>
|
||||
<AdsLsxf>1</AdsLsxf>
|
||||
<RvctClst>0</RvctClst>
|
||||
<GenPPlst>0</GenPPlst>
|
||||
<AdsCpuType>"Cortex-M4"</AdsCpuType>
|
||||
<RvctDeviceName></RvctDeviceName>
|
||||
<mOS>0</mOS>
|
||||
<uocRom>0</uocRom>
|
||||
<uocRam>0</uocRam>
|
||||
<hadIROM>1</hadIROM>
|
||||
<hadIRAM>1</hadIRAM>
|
||||
<hadXRAM>0</hadXRAM>
|
||||
<uocXRam>0</uocXRam>
|
||||
<RvdsVP>2</RvdsVP>
|
||||
<hadIRAM2>1</hadIRAM2>
|
||||
<hadIROM2>0</hadIROM2>
|
||||
<StupSel>8</StupSel>
|
||||
<useUlib>0</useUlib>
|
||||
<EndSel>0</EndSel>
|
||||
<uLtcg>0</uLtcg>
|
||||
<RoSelD>3</RoSelD>
|
||||
<RwSelD>3</RwSelD>
|
||||
<CodeSel>0</CodeSel>
|
||||
<OptFeed>0</OptFeed>
|
||||
<NoZi1>0</NoZi1>
|
||||
<NoZi2>0</NoZi2>
|
||||
<NoZi3>0</NoZi3>
|
||||
<NoZi4>0</NoZi4>
|
||||
<NoZi5>0</NoZi5>
|
||||
<Ro1Chk>0</Ro1Chk>
|
||||
<Ro2Chk>0</Ro2Chk>
|
||||
<Ro3Chk>0</Ro3Chk>
|
||||
<Ir1Chk>1</Ir1Chk>
|
||||
<Ir2Chk>0</Ir2Chk>
|
||||
<Ra1Chk>0</Ra1Chk>
|
||||
<Ra2Chk>0</Ra2Chk>
|
||||
<Ra3Chk>0</Ra3Chk>
|
||||
<Im1Chk>1</Im1Chk>
|
||||
<Im2Chk>0</Im2Chk>
|
||||
<OnChipMemories>
|
||||
<Ocm1>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm1>
|
||||
<Ocm2>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm2>
|
||||
<Ocm3>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm3>
|
||||
<Ocm4>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm4>
|
||||
<Ocm5>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm5>
|
||||
<Ocm6>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm6>
|
||||
<IRAM>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x20000000</StartAddress>
|
||||
<Size>0x20000</Size>
|
||||
</IRAM>
|
||||
<IROM>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x8000000</StartAddress>
|
||||
<Size>0x100000</Size>
|
||||
</IROM>
|
||||
<XRAM>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</XRAM>
|
||||
<OCR_RVCT1>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT1>
|
||||
<OCR_RVCT2>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT2>
|
||||
<OCR_RVCT3>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT3>
|
||||
<OCR_RVCT4>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x8000000</StartAddress>
|
||||
<Size>0x100000</Size>
|
||||
</OCR_RVCT4>
|
||||
<OCR_RVCT5>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT5>
|
||||
<OCR_RVCT6>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT6>
|
||||
<OCR_RVCT7>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT7>
|
||||
<OCR_RVCT8>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT8>
|
||||
<OCR_RVCT9>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x20000000</StartAddress>
|
||||
<Size>0x20000</Size>
|
||||
</OCR_RVCT9>
|
||||
<OCR_RVCT10>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x10000000</StartAddress>
|
||||
<Size>0x10000</Size>
|
||||
</OCR_RVCT10>
|
||||
</OnChipMemories>
|
||||
<RvctStartVector></RvctStartVector>
|
||||
</ArmAdsMisc>
|
||||
<Cads>
|
||||
<interw>1</interw>
|
||||
<Optim>1</Optim>
|
||||
<oTime>0</oTime>
|
||||
<SplitLS>0</SplitLS>
|
||||
<OneElfS>1</OneElfS>
|
||||
<Strict>0</Strict>
|
||||
<EnumInt>0</EnumInt>
|
||||
<PlainCh>0</PlainCh>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<wLevel>0</wLevel>
|
||||
<uThumb>0</uThumb>
|
||||
<uSurpInc>0</uSurpInc>
|
||||
<uC99>1</uC99>
|
||||
<useXO>0</useXO>
|
||||
<VariousControls>
|
||||
<MiscControls></MiscControls>
|
||||
<Define></Define>
|
||||
<Undefine></Undefine>
|
||||
<IncludePath></IncludePath>
|
||||
</VariousControls>
|
||||
</Cads>
|
||||
<Aads>
|
||||
<interw>1</interw>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<thumb>0</thumb>
|
||||
<SplitLS>0</SplitLS>
|
||||
<SwStkChk>0</SwStkChk>
|
||||
<NoWarn>0</NoWarn>
|
||||
<uSurpInc>0</uSurpInc>
|
||||
<useXO>0</useXO>
|
||||
<VariousControls>
|
||||
<MiscControls></MiscControls>
|
||||
<Define></Define>
|
||||
<Undefine></Undefine>
|
||||
<IncludePath></IncludePath>
|
||||
</VariousControls>
|
||||
</Aads>
|
||||
<LDads>
|
||||
<umfTarg>0</umfTarg>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<noStLib>0</noStLib>
|
||||
<RepFail>1</RepFail>
|
||||
<useFile>0</useFile>
|
||||
<TextAddressRange>0x08000000</TextAddressRange>
|
||||
<DataAddressRange>0x20000000</DataAddressRange>
|
||||
<pXoBase></pXoBase>
|
||||
<ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
|
||||
<IncludeLibs></IncludeLibs>
|
||||
<IncludeLibsPath></IncludeLibsPath>
|
||||
<Misc></Misc>
|
||||
<LinkerInputFile></LinkerInputFile>
|
||||
<DisabledWarnings></DisabledWarnings>
|
||||
</LDads>
|
||||
</TargetArmAds>
|
||||
</TargetOption>
|
||||
</Target>
|
||||
</Targets>
|
||||
|
||||
</Project>
|
||||
@@ -0,0 +1,387 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
|
||||
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
|
||||
|
||||
<SchemaVersion>2.1</SchemaVersion>
|
||||
|
||||
<Header>### uVision Project, (C) Keil Software</Header>
|
||||
|
||||
<Targets>
|
||||
<Target>
|
||||
<TargetName>rtthread</TargetName>
|
||||
<ToolsetNumber>0x4</ToolsetNumber>
|
||||
<ToolsetName>ARM-ADS</ToolsetName>
|
||||
<uAC6>0</uAC6>
|
||||
<TargetOption>
|
||||
<TargetCommonOption>
|
||||
<Device>STM32F407VGTx</Device>
|
||||
<Vendor>STMicroelectronics</Vendor>
|
||||
<PackID>Keil.STM32F4xx_DFP.2.12.0</PackID>
|
||||
<PackURL>http://www.keil.com/pack</PackURL>
|
||||
<Cpu>IRAM(0x20000000,0x00020000) IRAM2(0x10000000,0x00010000) IROM(0x08000000,0x00100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
|
||||
<FlashUtilSpec></FlashUtilSpec>
|
||||
<StartupFile></StartupFile>
|
||||
<FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F407VGTx$CMSIS\Flash\STM32F4xx_1024.FLM))</FlashDriverDll>
|
||||
<DeviceId>0</DeviceId>
|
||||
<RegisterFile>$$Device:STM32F407VGTx$Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h</RegisterFile>
|
||||
<MemoryEnv></MemoryEnv>
|
||||
<Cmp></Cmp>
|
||||
<Asm></Asm>
|
||||
<Linker></Linker>
|
||||
<OHString></OHString>
|
||||
<InfinionOptionDll></InfinionOptionDll>
|
||||
<SLE66CMisc></SLE66CMisc>
|
||||
<SLE66AMisc></SLE66AMisc>
|
||||
<SLE66LinkerMisc></SLE66LinkerMisc>
|
||||
<SFDFile>$$Device:STM32F407VGTx$CMSIS\SVD\STM32F40x.svd</SFDFile>
|
||||
<bCustSvd>0</bCustSvd>
|
||||
<UseEnv>0</UseEnv>
|
||||
<BinPath></BinPath>
|
||||
<IncludePath></IncludePath>
|
||||
<LibPath></LibPath>
|
||||
<RegisterFilePath></RegisterFilePath>
|
||||
<DBRegisterFilePath></DBRegisterFilePath>
|
||||
<TargetStatus>
|
||||
<Error>0</Error>
|
||||
<ExitCodeStop>0</ExitCodeStop>
|
||||
<ButtonStop>0</ButtonStop>
|
||||
<NotGenerated>0</NotGenerated>
|
||||
<InvalidFlash>1</InvalidFlash>
|
||||
</TargetStatus>
|
||||
<OutputDirectory>.\build\keil\Obj\</OutputDirectory>
|
||||
<OutputName>rtthread</OutputName>
|
||||
<CreateExecutable>1</CreateExecutable>
|
||||
<CreateLib>0</CreateLib>
|
||||
<CreateHexFile>0</CreateHexFile>
|
||||
<DebugInformation>1</DebugInformation>
|
||||
<BrowseInformation>0</BrowseInformation>
|
||||
<ListingPath>.\build\keil\List\</ListingPath>
|
||||
<HexFormatSelection>1</HexFormatSelection>
|
||||
<Merge32K>0</Merge32K>
|
||||
<CreateBatchFile>0</CreateBatchFile>
|
||||
<BeforeCompile>
|
||||
<RunUserProg1>0</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name></UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopU1X>0</nStopU1X>
|
||||
<nStopU2X>0</nStopU2X>
|
||||
</BeforeCompile>
|
||||
<BeforeMake>
|
||||
<RunUserProg1>0</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name></UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopB1X>0</nStopB1X>
|
||||
<nStopB2X>0</nStopB2X>
|
||||
</BeforeMake>
|
||||
<AfterMake>
|
||||
<RunUserProg1>1</RunUserProg1>
|
||||
<RunUserProg2>0</RunUserProg2>
|
||||
<UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
|
||||
<UserProg2Name></UserProg2Name>
|
||||
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
|
||||
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
|
||||
<nStopA1X>0</nStopA1X>
|
||||
<nStopA2X>0</nStopA2X>
|
||||
</AfterMake>
|
||||
<SelectedForBatchBuild>0</SelectedForBatchBuild>
|
||||
<SVCSIdString></SVCSIdString>
|
||||
</TargetCommonOption>
|
||||
<CommonProperty>
|
||||
<UseCPPCompiler>0</UseCPPCompiler>
|
||||
<RVCTCodeConst>0</RVCTCodeConst>
|
||||
<RVCTZI>0</RVCTZI>
|
||||
<RVCTOtherData>0</RVCTOtherData>
|
||||
<ModuleSelection>0</ModuleSelection>
|
||||
<IncludeInBuild>1</IncludeInBuild>
|
||||
<AlwaysBuild>0</AlwaysBuild>
|
||||
<GenerateAssemblyFile>0</GenerateAssemblyFile>
|
||||
<AssembleAssemblyFile>0</AssembleAssemblyFile>
|
||||
<PublicsOnly>0</PublicsOnly>
|
||||
<StopOnExitCode>3</StopOnExitCode>
|
||||
<CustomArgument></CustomArgument>
|
||||
<IncludeLibraryModules></IncludeLibraryModules>
|
||||
<ComprImg>1</ComprImg>
|
||||
</CommonProperty>
|
||||
<DllOption>
|
||||
<SimDllName>SARMCM3.DLL</SimDllName>
|
||||
<SimDllArguments>-MPU -REMAP</SimDllArguments>
|
||||
<SimDlgDll>DCM.DLL</SimDlgDll>
|
||||
<SimDlgDllArguments>-pCM4</SimDlgDllArguments>
|
||||
<TargetDllName>SARMCM3.DLL</TargetDllName>
|
||||
<TargetDllArguments>-MPU</TargetDllArguments>
|
||||
<TargetDlgDll>TCM.DLL</TargetDlgDll>
|
||||
<TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
|
||||
</DllOption>
|
||||
<DebugOption>
|
||||
<OPTHX>
|
||||
<HexSelection>1</HexSelection>
|
||||
<HexRangeLowAddress>0</HexRangeLowAddress>
|
||||
<HexRangeHighAddress>0</HexRangeHighAddress>
|
||||
<HexOffset>0</HexOffset>
|
||||
<Oh166RecLen>16</Oh166RecLen>
|
||||
</OPTHX>
|
||||
</DebugOption>
|
||||
<Utilities>
|
||||
<Flash1>
|
||||
<UseTargetDll>1</UseTargetDll>
|
||||
<UseExternalTool>0</UseExternalTool>
|
||||
<RunIndependent>0</RunIndependent>
|
||||
<UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
|
||||
<Capability>1</Capability>
|
||||
<DriverSelection>4096</DriverSelection>
|
||||
</Flash1>
|
||||
<bUseTDR>1</bUseTDR>
|
||||
<Flash2>BIN\UL2CM3.DLL</Flash2>
|
||||
<Flash3>"" ()</Flash3>
|
||||
<Flash4></Flash4>
|
||||
<pFcarmOut></pFcarmOut>
|
||||
<pFcarmGrp></pFcarmGrp>
|
||||
<pFcArmRoot></pFcArmRoot>
|
||||
<FcArmLst>0</FcArmLst>
|
||||
</Utilities>
|
||||
<TargetArmAds>
|
||||
<ArmAdsMisc>
|
||||
<GenerateListings>0</GenerateListings>
|
||||
<asHll>1</asHll>
|
||||
<asAsm>1</asAsm>
|
||||
<asMacX>1</asMacX>
|
||||
<asSyms>1</asSyms>
|
||||
<asFals>1</asFals>
|
||||
<asDbgD>1</asDbgD>
|
||||
<asForm>1</asForm>
|
||||
<ldLst>0</ldLst>
|
||||
<ldmm>1</ldmm>
|
||||
<ldXref>1</ldXref>
|
||||
<BigEnd>0</BigEnd>
|
||||
<AdsALst>1</AdsALst>
|
||||
<AdsACrf>1</AdsACrf>
|
||||
<AdsANop>0</AdsANop>
|
||||
<AdsANot>0</AdsANot>
|
||||
<AdsLLst>1</AdsLLst>
|
||||
<AdsLmap>1</AdsLmap>
|
||||
<AdsLcgr>1</AdsLcgr>
|
||||
<AdsLsym>1</AdsLsym>
|
||||
<AdsLszi>1</AdsLszi>
|
||||
<AdsLtoi>1</AdsLtoi>
|
||||
<AdsLsun>1</AdsLsun>
|
||||
<AdsLven>1</AdsLven>
|
||||
<AdsLsxf>1</AdsLsxf>
|
||||
<RvctClst>0</RvctClst>
|
||||
<GenPPlst>0</GenPPlst>
|
||||
<AdsCpuType>"Cortex-M4"</AdsCpuType>
|
||||
<RvctDeviceName></RvctDeviceName>
|
||||
<mOS>0</mOS>
|
||||
<uocRom>0</uocRom>
|
||||
<uocRam>0</uocRam>
|
||||
<hadIROM>1</hadIROM>
|
||||
<hadIRAM>1</hadIRAM>
|
||||
<hadXRAM>0</hadXRAM>
|
||||
<uocXRam>0</uocXRam>
|
||||
<RvdsVP>2</RvdsVP>
|
||||
<hadIRAM2>1</hadIRAM2>
|
||||
<hadIROM2>0</hadIROM2>
|
||||
<StupSel>8</StupSel>
|
||||
<useUlib>0</useUlib>
|
||||
<EndSel>0</EndSel>
|
||||
<uLtcg>0</uLtcg>
|
||||
<nSecure>0</nSecure>
|
||||
<RoSelD>3</RoSelD>
|
||||
<RwSelD>3</RwSelD>
|
||||
<CodeSel>0</CodeSel>
|
||||
<OptFeed>0</OptFeed>
|
||||
<NoZi1>0</NoZi1>
|
||||
<NoZi2>0</NoZi2>
|
||||
<NoZi3>0</NoZi3>
|
||||
<NoZi4>0</NoZi4>
|
||||
<NoZi5>0</NoZi5>
|
||||
<Ro1Chk>0</Ro1Chk>
|
||||
<Ro2Chk>0</Ro2Chk>
|
||||
<Ro3Chk>0</Ro3Chk>
|
||||
<Ir1Chk>1</Ir1Chk>
|
||||
<Ir2Chk>0</Ir2Chk>
|
||||
<Ra1Chk>0</Ra1Chk>
|
||||
<Ra2Chk>0</Ra2Chk>
|
||||
<Ra3Chk>0</Ra3Chk>
|
||||
<Im1Chk>1</Im1Chk>
|
||||
<Im2Chk>0</Im2Chk>
|
||||
<OnChipMemories>
|
||||
<Ocm1>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm1>
|
||||
<Ocm2>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm2>
|
||||
<Ocm3>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm3>
|
||||
<Ocm4>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm4>
|
||||
<Ocm5>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm5>
|
||||
<Ocm6>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</Ocm6>
|
||||
<IRAM>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x20000000</StartAddress>
|
||||
<Size>0x20000</Size>
|
||||
</IRAM>
|
||||
<IROM>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x8000000</StartAddress>
|
||||
<Size>0x100000</Size>
|
||||
</IROM>
|
||||
<XRAM>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</XRAM>
|
||||
<OCR_RVCT1>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT1>
|
||||
<OCR_RVCT2>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT2>
|
||||
<OCR_RVCT3>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT3>
|
||||
<OCR_RVCT4>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x8000000</StartAddress>
|
||||
<Size>0x100000</Size>
|
||||
</OCR_RVCT4>
|
||||
<OCR_RVCT5>
|
||||
<Type>1</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT5>
|
||||
<OCR_RVCT6>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT6>
|
||||
<OCR_RVCT7>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT7>
|
||||
<OCR_RVCT8>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x0</StartAddress>
|
||||
<Size>0x0</Size>
|
||||
</OCR_RVCT8>
|
||||
<OCR_RVCT9>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x20000000</StartAddress>
|
||||
<Size>0x20000</Size>
|
||||
</OCR_RVCT9>
|
||||
<OCR_RVCT10>
|
||||
<Type>0</Type>
|
||||
<StartAddress>0x10000000</StartAddress>
|
||||
<Size>0x10000</Size>
|
||||
</OCR_RVCT10>
|
||||
</OnChipMemories>
|
||||
<RvctStartVector></RvctStartVector>
|
||||
</ArmAdsMisc>
|
||||
<Cads>
|
||||
<interw>1</interw>
|
||||
<Optim>1</Optim>
|
||||
<oTime>0</oTime>
|
||||
<SplitLS>0</SplitLS>
|
||||
<OneElfS>0</OneElfS>
|
||||
<Strict>0</Strict>
|
||||
<EnumInt>0</EnumInt>
|
||||
<PlainCh>0</PlainCh>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<wLevel>0</wLevel>
|
||||
<uThumb>0</uThumb>
|
||||
<uSurpInc>0</uSurpInc>
|
||||
<uC99>1</uC99>
|
||||
<useXO>0</useXO>
|
||||
<v6Lang>1</v6Lang>
|
||||
<v6LangP>1</v6LangP>
|
||||
<vShortEn>1</vShortEn>
|
||||
<vShortWch>1</vShortWch>
|
||||
<v6Lto>0</v6Lto>
|
||||
<v6WtE>0</v6WtE>
|
||||
<v6Rtti>0</v6Rtti>
|
||||
<VariousControls>
|
||||
<MiscControls></MiscControls>
|
||||
<Define></Define>
|
||||
<Undefine></Undefine>
|
||||
<IncludePath></IncludePath>
|
||||
</VariousControls>
|
||||
</Cads>
|
||||
<Aads>
|
||||
<interw>1</interw>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<thumb>0</thumb>
|
||||
<SplitLS>0</SplitLS>
|
||||
<SwStkChk>0</SwStkChk>
|
||||
<NoWarn>0</NoWarn>
|
||||
<uSurpInc>0</uSurpInc>
|
||||
<useXO>0</useXO>
|
||||
<uClangAs>0</uClangAs>
|
||||
<VariousControls>
|
||||
<MiscControls></MiscControls>
|
||||
<Define></Define>
|
||||
<Undefine></Undefine>
|
||||
<IncludePath></IncludePath>
|
||||
</VariousControls>
|
||||
</Aads>
|
||||
<LDads>
|
||||
<umfTarg>0</umfTarg>
|
||||
<Ropi>0</Ropi>
|
||||
<Rwpi>0</Rwpi>
|
||||
<noStLib>0</noStLib>
|
||||
<RepFail>1</RepFail>
|
||||
<useFile>0</useFile>
|
||||
<TextAddressRange>0x08000000</TextAddressRange>
|
||||
<DataAddressRange>0x20000000</DataAddressRange>
|
||||
<pXoBase></pXoBase>
|
||||
<ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
|
||||
<IncludeLibs></IncludeLibs>
|
||||
<IncludeLibsPath></IncludeLibsPath>
|
||||
<Misc></Misc>
|
||||
<LinkerInputFile></LinkerInputFile>
|
||||
<DisabledWarnings></DisabledWarnings>
|
||||
</LDads>
|
||||
</TargetArmAds>
|
||||
</TargetOption>
|
||||
</Target>
|
||||
</Targets>
|
||||
|
||||
<RTE>
|
||||
<apis/>
|
||||
<components/>
|
||||
<files/>
|
||||
</RTE>
|
||||
|
||||
</Project>
|
||||
Reference in New Issue
Block a user