Mirrors_Framework/paparazzi
1
0
Fork 0
mirror of https://github.com/paparazzi/paparazzi.git synced 2026-06-04 13:55:40 +08:00
Code Issues Actions 31 Packages Projects Releases Wiki Activity
Files
93c0f4a970108d2ae0e6b96a77f6100370141754
paparazzi/CHANGELOG.md
T
Felix Ruess 12bd529071 v5.8 stable release
2015-12-20 15:06:08 +01:00

1602 lines
68 KiB
Markdown
Raw Blame History

Paparazzi v5.8.0_stable
=======================
Stable version release.
- module: nav_catapult: avoid conditional directives
[#1454] (https://github.com/paparazzi/paparazzi/pull/1454)
- module: gps_ubx_ucenter fix autobaud and autoconf for ublox-8
[#1480] (https://github.com/paparazzi/paparazzi/pull/1480)
- module: add stereocam2state which publishes a VELOCITY_ESTIMATE from stereocam
[#1486] (https://github.com/paparazzi/paparazzi/pull/1486)
- arch/linux: I2C: use repeated-start for transceive as required by some sensors
[#1469] (https://github.com/paparazzi/paparazzi/pull/1469)
- remove unused libeknav and fms folder
[#1487] (https://github.com/paparazzi/paparazzi/pull/1487)
Paparazzi 5.7.1_testing
=======================
Second release candidate for v5.8 stable release.
- SPI slave implemented and tested for STM32F4
[#1456] (https://github.com/paparazzi/paparazzi/pull/1456)
- Added support for Elle0 V1.2
[#1465] (https://github.com/paparazzi/paparazzi/pull/1465)
- Bebop: fix motor directions
[#1466] (https://github.com/paparazzi/paparazzi/pull/1466)
[#1468] (https://github.com/paparazzi/paparazzi/pull/1468)
[#1474] (https://github.com/paparazzi/paparazzi/pull/1474)
- stereo camera modules: obstacle avoidance and follow me
[#1462] (https://github.com/paparazzi/paparazzi/pull/1462)
[#1472] (https://github.com/paparazzi/paparazzi/pull/1472)
[#1473] (https://github.com/paparazzi/paparazzi/pull/1473)
- fix video_rtp_stream and bebop_front_camera if not using UDP for telemetry
- modules xml requires doc and description now
- Modules can be used like subsystems in airframe files
[#1471] (https://github.com/paparazzi/paparazzi/pull/1471)
- rotorcraft rate controller setpoints in deg/s
[#1479] (https://github.com/paparazzi/paparazzi/pull/1479)
- Guided mode for rotorcrafts
[#1457] (https://github.com/paparazzi/paparazzi/pull/1457)
- naze32: PPM input on PA0 by default
[#1481] (https://github.com/paparazzi/paparazzi/pull/1481)
Paparazzi 5.7.0_testing
=======================
First release candidate for v5.8 stable release.
General
-------
- Tell Black Magic probe to use the reset pin before scanning
[#1301] (https://github.com/paparazzi/paparazzi/pull/1301)
- Optitrack/Natnet: Implement smaller GPS messages from NATNET to PPRZ
[#1308] (https://github.com/paparazzi/paparazzi/pull/1308)
- Paparazzi Center: update list of settings on build
[#1331] (https://github.com/paparazzi/paparazzi/issues/1331)
- Paparazzi Center: add reload button
[#1359] (https://github.com/paparazzi/paparazzi/pull/1359)
- Paparazzi Center: easily create new aircraft by copying existing aircraft
[#1209] (https://github.com/paparazzi/paparazzi/issues/1209)
- python messages parser: add unit conversion coeffs
[#1340] (https://github.com/paparazzi/paparazzi/pull/1340)
- server: increase maximum Ivy message length for use with many settings
[#1344] (https://github.com/paparazzi/paparazzi/issues/1344)
- flight plans: add exec attribute to exceptions
[#1347] (https://github.com/paparazzi/paparazzi/pull/1347)
- python: compare and test different attitude reference models
[#1357] (https://github.com/paparazzi/paparazzi/pull/1357)
- GCS: only print bat warning every 10s
[#1358] (https://github.com/paparazzi/paparazzi/pull/1358)
- GCS: kill confirmation opitional with -no_confirm_kill option
[#873] (https://github.com/paparazzi/paparazzi/issues/873)
- GCS: load KML sectors for display in GCS
[#404] (https://github.com/paparazzi/paparazzi/issues/404)
- GCS: fix zoom of video papget
[#889] (https://github.com/paparazzi/paparazzi/issues/889)
- generators: check waypoint altitude against SRTM data
[#1361] (https://github.com/paparazzi/paparazzi/pull/1361)
- Add ADS-B parser and handling of INTRUDERS
[#1372] (https://github.com/paparazzi/paparazzi/pull/1372)
- logalizer: replay ground messages
[#1380] (https://github.com/paparazzi/paparazzi/pull/1380)
- messages: support multiple variable length arrays in telemetry
[#1385] (https://github.com/paparazzi/paparazzi/pull/1385)
- Docker: fix script to run Docker on OSX (with X-access)
[#1425] (https://github.com/paparazzi/paparazzi/pull/1425)
- python: fix messages/settings with wxgtk3.0
[#1435] (https://github.com/paparazzi/paparazzi/issues/1435)
- flight plans for fixedwing: force UTM zone of waypoints to same as ref point to fix waypoints across two UTM zones
[#303] (https://github.com/paparazzi/paparazzi/issues/303)
- realtime plotter: fix issue on Ubuntu with Unity
[#1446] (https://github.com/paparazzi/paparazzi/issues/1446)
Airborne
--------
- INS: vertical filter: rename VF_FLOAT_x defines to VFF_x
- persistent_settings: add settings_clear
[#1309] (https://github.com/paparazzi/paparazzi/pull/1309)
- electrical: fix non-real number possibility in current calculation
[#1314] (https://github.com/paparazzi/paparazzi/pull/1314)
- electrical: improve current estimation with MILLIAMP_AT_IDLE_THROTTLE
[#1319] (https://github.com/paparazzi/paparazzi/pull/1319)
- energy control: use ABI instead of IMU struct
[#1324] (https://github.com/paparazzi/paparazzi/pull/1324)
- state interface: pass basic types by value
[#1330] (https://github.com/paparazzi/paparazzi/pull/1330)
- settings: mark a lot more settings as persistent
[#1345] (https://github.com/paparazzi/paparazzi/pull/1345)
- add OPTICAL_FLOW and VELOCITY_ESTIMATE ABI messages
[#1350] (https://github.com/paparazzi/paparazzi/pull/1350)
- INS: use opticflow/VELOCITY_ESTIMATE in filter
[#1387] (https://github.com/paparazzi/paparazzi/issues/1387)
[#1412] (https://github.com/paparazzi/paparazzi/pull/1412)
- radio_control: change spektrum and superbitrf channel signs to conform to standard
[#1403] (https://github.com/paparazzi/paparazzi/pull/1403)
- actuators: add Spektrum output actuators
[#1411] (https://github.com/paparazzi/paparazzi/pull/1411)
- actuators: new AscTec ESC I2C protocol
[#1416] (https://github.com/paparazzi/paparazzi/pull/1416)
- periodic telemetry: possibility to register periodic message multiple times
[#1440] (https://github.com/paparazzi/paparazzi/pull/1440)
- AHRS/messages: add component/filter ID to AHRS messages
[#1441] (https://github.com/paparazzi/paparazzi/pull/1441)
- peridic telemetry: use msg ID instead of strings for matching (reduces size) and add support for mavlink
[#1448] (https://github.com/paparazzi/paparazzi/pull/1448)
- math: possibility to compress sine table for flash and RAM
[#1452] (https://github.com/paparazzi/paparazzi/pull/1452)
Rotorcraft firmware
-------------------
- navigation: tunable navigation parameters in airframe file
[#1315] (https://github.com/paparazzi/paparazzi/pull/1315)
- guidance: add a flip mode
[#1352] (https://github.com/paparazzi/paparazzi/pull/1352)
- guidance: add outer loop INDI control
[#1354] (https://github.com/paparazzi/paparazzi/pull/1354)
- stabilization: refactor attitude reference generation and runtime adjustable saturation
[#1374] (https://github.com/paparazzi/paparazzi/pull/1374)
[#1382] (https://github.com/paparazzi/paparazzi/pull/1382)
- radio control: possibility to use two 2way switches for mode
[#1375] (https://github.com/paparazzi/paparazzi/pull/1375)
- support dual-mcu setup with split autopilot (AP) and FlyByWire (FBW)
[#1423] (https://github.com/paparazzi/paparazzi/pull/1423)
- support for helicopter/swashplate mixing and throttle curves
[#1437] (https://github.com/paparazzi/paparazzi/pull/1437)
- tmtc/server: set course correctly from east/north velocity for correct ACINFO
[#1449] (https://github.com/paparazzi/paparazzi/pull/1449)
- possibility to use NAV mode without GPS (define NO_GPS_NEEDED_FOR_NAV)
[#1451] (https://github.com/paparazzi/paparazzi/issues/1451)
Modules
-------
- video_rtp_stream: make sending via RTP configurable and fix netcat option
[#1293] (https://github.com/paparazzi/paparazzi/pull/1293)
[#1426] (https://github.com/paparazzi/paparazzi/pull/1426)
- video_exif: Add GPS coordinates in JPEG images
[#1311] (https://github.com/paparazzi/paparazzi/pull/1311)
- bebop_front_camera: front camera streaming at low resolution
[#1313] (https://github.com/paparazzi/paparazzi/pull/1313)
- stereocam module: decode TUDelft stereocam messages
[#1317] (https://github.com/paparazzi/paparazzi/pull/1317)
[#1342] (https://github.com/paparazzi/paparazzi/pull/1342)
[#1362] (https://github.com/paparazzi/paparazzi/pull/1362)
[#1433] (https://github.com/paparazzi/paparazzi/pull/1433)
- digital_cam_video: trigger video_rtp_stream to store JPEG images
[#1323] (https://github.com/paparazzi/paparazzi/pull/1323)
- cv_qrcode: read QR code using libzbar
[#1327] (https://github.com/paparazzi/paparazzi/pull/1327)
- video_thread: simple framework to read video and add other computer vision modules
[#1328] (https://github.com/paparazzi/paparazzi/pull/1328)
- opticflow: add linear optical flow fit
[#1332] (https://github.com/paparazzi/paparazzi/pull/1332)
- cv_blob_locator: Find a colored item and track its geo-location and update a waypoint to it
[#1348] (https://github.com/paparazzi/paparazzi/pull/1348)
- dropzone: select a dropzone
[#1356] (https://github.com/paparazzi/paparazzi/pull/1356)
- logger_sd_spi_direct: high speed logging to SD Card (via SPI)
[#1392] (https://github.com/paparazzi/paparazzi/pull/1392)
- cleanup configure options for SPI/I2C devices
[#1424] (https://github.com/paparazzi/paparazzi/pull/1424)
- mavlink: modify waypoints and add Paparazzi specific SCRIPT messages to change blocks
[#1422] (https://github.com/paparazzi/paparazzi/pull/1422)
[#1434] (https://github.com/paparazzi/paparazzi/pull/1434)
Simulation
----------
- fixedwing sim: fix datalink_time
[#1394] (https://github.com/paparazzi/paparazzi/pull/1394)
- NPS: use UDP for telemetry/datalink
[#1404] (https://github.com/paparazzi/paparazzi/pull/1404)
Drivers/HW support
------------------
- peripherals: hmc58xx: only set data available if measurements were valid
- imu: booz2 v1.2 has HMC5843
[#1300] (https://github.com/paparazzi/paparazzi/pull/1300)
- STM32F4: added support for persistent settings
[#1302] (https://github.com/paparazzi/paparazzi/pull/1302)
- telemetry via Bluegiga bluetooth module (SPI)
[#1303] (https://github.com/paparazzi/paparazzi/pull/1303)
[#1325] (https://github.com/paparazzi/paparazzi/pull/1325)
[#1365] (https://github.com/paparazzi/paparazzi/pull/1365)
[#1388] (https://github.com/paparazzi/paparazzi/pull/1388)
[#1401] (https://github.com/paparazzi/paparazzi/pull/1401)
- INS: Vectornav VN-200 driver
[#1318] (https://github.com/paparazzi/paparazzi/pull/1318)
- apogee: IMU: test_baro_board with IMU
[#1310] (https://github.com/paparazzi/paparazzi/pull/1310/commits)
- Bebop: bottom camera with VGA resolution
[#1316] (https://github.com/paparazzi/paparazzi/pull/1316)
- Parrot drones: easier switching between bottom and front cameras
[#1333] (https://github.com/paparazzi/paparazzi/pull/1333)
- Bebop: fix RPM measurements
[#1400] (https://github.com/paparazzi/paparazzi/pull/1400)
- support for Bebop2
[#1429] (https://github.com/paparazzi/paparazzi/pull/1429)
- Improve Piksi GPS (DGPS, RTK) support
[#1349] (https://github.com/paparazzi/paparazzi/pull/1349)
[#1386] (https://github.com/paparazzi/paparazzi/pull/1386)
- STM32: fix ADC bug when trying to use higher channels
[#1366] (https://github.com/paparazzi/paparazzi/pull/1366)
- STM32: fix SPI slave initialization
[#1371] (https://github.com/paparazzi/paparazzi/pull/1371)
- boards: support for naze32, CC3D and CJMCU
[#1452] (https://github.com/paparazzi/paparazzi/pull/1452)
Paparazzi 5.6.0_stable
======================
Stable version release.
- compile/run paparazzi in a docker container
[#1272] (https://github.com/paparazzi/paparazzi/pull/1272)
- multimon: fix compilation with gcc 5.x
[#1276] (https://github.com/paparazzi/paparazzi/pull/1276)
- arch/linux: replace mcu event polling with threads
[#1277] (https://github.com/paparazzi/paparazzi/pull/1277)
- ardrone2: make UART1_DEV changeable from airframe file
- optitrack/natnet: update to version 2.7
[#1275] (https://github.com/paparazzi/paparazzi/pull/1275)
[#1284] (https://github.com/paparazzi/paparazzi/pull/1284)
- link/GCS: fix LINK_REPORT and display of link status in GCS
[#1279] (https://github.com/paparazzi/paparazzi/pull/1279)
- GPS: add hmsl to GPS_LLA message
[#1282] (https://github.com/paparazzi/paparazzi/pull/1282)
- modules: set nice level for viewvideo thread
[#1283] (https://github.com/paparazzi/paparazzi/pull/1283)
- arch/linux: Rename uart/udp_transmit to uart/udp_put_byte
[#1285] (https://github.com/paparazzi/paparazzi/pull/1285)
- GPS: NMEA parser fixes
[#1287] (https://github.com/paparazzi/paparazzi/pull/1287)
- modules: viewvideo, fix image path
[#1289] (https://github.com/paparazzi/paparazzi/issues/1289)
- simulator: FlightGear visualization using native-fdm for NPS
[#1290] (https://github.com/paparazzi/paparazzi/pull/1290)
- rotorcraft: INDI stabilization updates
[#1292] (https://github.com/paparazzi/paparazzi/pull/1292)
- boards: add support for ELLE0
[#1294] (https://github.com/paparazzi/paparazzi/pull/1294)
- arch/linux: uart: fix crash if device does not exist
[#1299] (https://github.com/paparazzi/paparazzi/pull/1299)
Paparazzi 5.5.2_testing
=======================
Thirst release canditate for v5.6 stable release.
- ardrone2 and bebop: disable even loop limiting again
[#1240] (https://github.com/paparazzi/paparazzi/pull/1240)
- bebop: finally fix I2C address for baro
- modules: update geo_mag to latest WMM2015 model
[#1270] (https://github.com/paparazzi/paparazzi/pull/1270)
- settings: add optional target attribute and calc MD5sum according to usable settings
[#1157] (https://github.com/paparazzi/paparazzi/pull/1157)
- stm32: improve I2C stability in case of stuck bus
[#1264] (https://github.com/paparazzi/paparazzi/pull/1264)
- i2c: cleanup I2C_ERRORS reporting
[#1268] (https://github.com/paparazzi/paparazzi/pull/1268)
- modules: add divergen calculation for opticflow
[#1262] (https://github.com/paparazzi/paparazzi/pull/1262)
- python: Add some utilities and a serial link interface to decode/encode PPRZ messages over a serial link
[#1261] (https://github.com/paparazzi/paparazzi/pull/1261)
- modules: mag_hmc58xx: configure MAG_HMC58XX_I2C_DEV
[#1274] (https://github.com/paparazzi/paparazzi/pull/1274)
- IMU: possibility to disable mag on aspirin 2
[#1273] (https://github.com/paparazzi/paparazzi/pull/1273)
- fixedwing: fix H_CTL_YAW_LOOP in stabilization adaptive
Paparazzi 5.5.1_testing
=======================
Second release candidate for v5.6 stable release.
- rotorcraft: fix stabilization INDI crash on takeoff bug
[#1255] (https://github.com/paparazzi/paparazzi/pull/1255)
- airborne: change ABI_BROADCAST id from 0 to 255 and introduce ABI_DISABLE
[#1260] (https://github.com/paparazzi/paparazzi/pull/1260)
- airframes: cleanup and use standard motor mixing types
[#1231] (https://github.com/paparazzi/paparazzi/pull/1231)
[#1249] (https://github.com/paparazzi/paparazzi/pull/1249)
- ahrs: reduced default ahrs align delay
[#1256] (https://github.com/paparazzi/paparazzi/pull/1256)
- add an optional board_init function and fix bat check on bebop
[#1253] (https://github.com/paparazzi/paparazzi/pull/1253)
- ARDrone2: fix battery checks, needs bat_voltage_ardrone2 module now
[#1252] (https://github.com/paparazzi/paparazzi/pull/1252)
- paparazzi center: improve handling of programs from control_panel.xml
[#1247] (https://github.com/paparazzi/paparazzi/pull/1247)
- server: set http port, replace -kml_port option with -port
[#1248] (https://github.com/paparazzi/paparazzi/pull/1248)
- logalizer: rename plot to logplotter for clarity
[#1226] (https://github.com/paparazzi/paparazzi/pull/1226
- GCS: don't prove airframe dtd if served via http
[#1246] (https://github.com/paparazzi/paparazzi/pull/1246)
- Fixed unsanctioned yaw unkill problem with uninitialised joysticks
[#1242] (https://github.com/paparazzi/paparazzi/pull/1242)
Paparazzi 5.5.0_testing
=======================
First release candidate for v5.6 stable release.
General
-------
- paparazzi center: disable build/upload buttons during build/upload
[#603] (https://github.com/paparazzi/paparazzi/issues/603)
- paparazzi center: case insensitive sort of airframe combobox
[#993] (https://github.com/paparazzi/paparazzi/issues/993)
- paparazzi center: add `@AIRCRAFT` and `@AC_ID` placeholders for generic sessions
[#1217] (https://github.com/paparazzi/paparazzi/pull/1217)
- GCS: improve papgets with multi aircraft support
[#1068] (https://github.com/paparazzi/paparazzi/pull/1068)
- GCS: fix undo for list of values
[#1054] (https://github.com/paparazzi/paparazzi/issues/1054)
- GCS: fix AIRCRAFTS syncronization issue with server (sometimes resulted in blank GCS)
[#1078] (https://github.com/paparazzi/paparazzi/issues/1078)
- GCS: set bat level to UNK/0 at startup
[#885] (https://github.com/paparazzi/paparazzi/issues/885)
- GCS: add -ac_ids option to specify displayed aircrafts
[#1173] (https://github.com/paparazzi/paparazzi/pull/1173)
- GCS: add new flat icon theme
[#1193] (https://github.com/paparazzi/paparazzi/pull/1193)
[#1234] (https://github.com/paparazzi/paparazzi/pull/1234)
- plotter: add support for adding constant curves via command line
[#1227] (https://github.com/paparazzi/paparazzi/pull/1227)
- logplotter: rename plot to logplotter for clarity
[#1226] (https://github.com/paparazzi/paparazzi/pull/1226)
- ground segment: add geometry param to messages and setttings agents
[#1232] (https://github.com/paparazzi/paparazzi/pull/1232)
- ground segment: improve Ivy efficiency
[#1082] (https://github.com/paparazzi/paparazzi/pull/1082)
- link: parameters for period of PING and LINK_REPORT messages
[#1037] (https://github.com/paparazzi/paparazzi/issues/1037)
- link: add '-ac_timeout' parameter after which AC is marked as dead
[#820] (https://github.com/paparazzi/paparazzi/issues/820)
- OCaml: try to live in harmony with the garbage collector
[#1076] (https://github.com/paparazzi/paparazzi/pull/1076)
- OCaml: use Array.make instead of deprecated Array.create
- OCaml: use camlp4 to ifdef around netclient/lablgtk version differences
[#1137] (https://github.com/paparazzi/paparazzi/pull/1137)
- OCaml: fix string formatting of values in pprz ocaml lib
[#1135] (https://github.com/paparazzi/paparazzi/pull/1138)
- OCaml: remove deprecated GnoDruid
- python: generate paparazzi math wrappers with SWIG
[#1066] (https://github.com/paparazzi/paparazzi/pull/1066)
- python: improve ivy messages interface
[#1073] (https://github.com/paparazzi/paparazzi/pull/1073)
- python: add simple ivy2redis script
[#1071] (https://github.com/paparazzi/paparazzi/pull/1071)
- python: add report tool for IMU scaled messages
[#1194] (https://github.com/paparazzi/paparazzi/pull/1194)
- build: Possibilty to specify conf.xml file for building aircrafts
[#1134] (https://github.com/paparazzi/paparazzi/pull/1134)
- build: use -ggdb3 DEBUG_FLAGS by default
[#1164] (https://github.com/paparazzi/paparazzi/pull/1164)
- build: use pkg-config for ivy-c if available
- joystick: add new RC USB joystick from HobbyKing
[#1088] (https://github.com/paparazzi/paparazzi/pull/1088)
- conf: add HooperFly quad/hexa/octo airframe/JSBSim configs and new GCS icons
[#1081] (https://github.com/paparazzi/paparazzi/pull/1081)
- flight plans: dynamic sectors and InsideX function for concave polygons
[#643] (https://github.com/paparazzi/paparazzi/issues/643)
[#605] (https://github.com/paparazzi/paparazzi/issues/605)
[#1204] (https://github.com/paparazzi/paparazzi/pull/1204)
- improve defining of arrays in the airframe file
[#564] (https://github.com/paparazzi/paparazzi/issues/564)
[#1192] (https://github.com/paparazzi/paparazzi/pull/1192)
- update udev rules
[#1165] (https://github.com/paparazzi/paparazzi/pull/1165)
- update google map version extraction script
Airborne
--------
- allow to pass variables by value to ABI callbacks
[#1087] (https://github.com/paparazzi/paparazzi/pull/1087)
- major refactoring of AHRS/INS interfaces using ABI, add dual AHRS support
[#856] (https://github.com/paparazzi/paparazzi/pull/856)
[#1130] (https://github.com/paparazzi/paparazzi/pull/1130)
- AHRS: add (yet another) AHRS based on an invariant filter
- GPS/IMU: directly send ABI messages from implementation
[#1153] (https://github.com/paparazzi/paparazzi/pull/1153)
[#1154] (https://github.com/paparazzi/paparazzi/pull/1154)
- refactoring, use the generic LinkDevice interface for receiving data streams
[#1140] (https://github.com/paparazzi/paparazzi/pull/1140)
- telemetry: store periodic telemetry msg names as const to save ram
[#1151] (https://github.com/paparazzi/paparazzi/pull/1151)
- actuators: dual dual pwm
[#1102] (https://github.com/paparazzi/paparazzi/pull/1102)
- GPS: NMEA parser improvements
[#1146] (https://github.com/paparazzi/paparazzi/pull/1146)
- GPS: fix furuno parser (Bebop)
[#1148] (https://github.com/paparazzi/paparazzi/pull/1148)
- INS: start considering BODY_TO_GPS translation
[#1080] (https://github.com/paparazzi/paparazzi/pull/1080)
- INS: update NED accel with ins_alt_float
[#1156] (https://github.com/paparazzi/paparazzi/pull/1156)
- INS: prevent propagation if there are no measurement updates
[#1241] (https://github.com/paparazzi/paparazzi/pull/1241)
- cleanup: remove unused/unmaintained beth and fms code
[#1162] (https://github.com/paparazzi/paparazzi/pull/1162)
- state interface: fix LLA calculation if only UTM origin initialized
[#1171] (https://github.com/paparazzi/paparazzi/pull/1171)
- chibios SD logger: fix bad file name problem
- fixedwing stabilization: yaw damper and active lift ctrl
[#1190] (https://github.com/paparazzi/paparazzi/pull/1190)
Rotorcraft firmware
-------------------
- fix attitude flight plan primitive (attitude_set_rpy_setpoint)
[#1103] (https://github.com/paparazzi/paparazzi/pull/1103)
- implement global waypoints for rotorcrafts
[#1065] (https://github.com/paparazzi/paparazzi/pull/1065)
- improve motor_mixing priorities
[#1170] (https://github.com/paparazzi/paparazzi/pull/1170)
- predefined motor_mixing for common configurations
[#1175] (https://github.com/paparazzi/paparazzi/pull/1175)
[#1244] (https://github.com/paparazzi/paparazzi/pull/1244)
- heading integration protection in RC-event
[#1174] (https://github.com/paparazzi/paparazzi/pull/1174)
- waypoint API function naming cleanup
[#1169] (https://github.com/paparazzi/paparazzi/pull/1169)
- guidance: fix max bank angle limit
- make the heading flight plan primitive usable
[#1218] (https://github.com/paparazzi/paparazzi/pull/1218)
- add simplified INDI (Incremental Nonlinear Dynamic Inversion) stabilization
[#1207] (https://github.com/paparazzi/paparazzi/pull/1207)
- stabilization quat_int: reduce integrator quantization error
[#1205] (https://github.com/paparazzi/paparazzi/pull/1205)
- fix arming with kill switch
[#1125] (https://github.com/paparazzi/paparazzi/pull/1125)
Modules
-------
- allow conditions in module defines and update meteo_stick
[#1092] (https://github.com/paparazzi/paparazzi/pull/1092)
- rewrite nav_bungee_takeoff
[#1074] (https://github.com/paparazzi/paparazzi/pull/1074)
- add video_usb_logger for ARDrone2
[#1086] (https://github.com/paparazzi/paparazzi/pull/1086)
- optic flow based hover for ARDrone2
[#1062] (https://github.com/paparazzi/paparazzi/pull/1062)
- airspeed_ets: add 3rd party mode support
[#1099] (https://github.com/paparazzi/paparazzi/pull/1099)
- refactor logger modules
[#1095] (https://github.com/paparazzi/paparazzi/pull/1095)
- AHRS: convert AHRS infrared to a module
[#1127] (https://github.com/paparazzi/paparazzi/pull/1127)
- create_module: enforce lowercase file and dir and function names
[#914] (https://github.com/paparazzi/paparazzi/issues/914)
- add flight_recorder, log to SD card or uart, configure via telemetry.xml
[#1114] (https://github.com/paparazzi/paparazzi/pull/1144)
- air_data: take geoid separation into account when calculating QNH
- air_data: use CAS/EAS for airspeed and send TAS in message
[#1155] (https://github.com/paparazzi/paparazzi/pull/1155)
- digital_cam: specify time in seconds
[#1172] (https://github.com/paparazzi/paparazzi/pull/1172)
- amsys baro/airspeed: fixed max pressure for 5812-0001-D
[#1181] (https://github.com/paparazzi/paparazzi/pull/1181/files)
- add survey rectangle module for rotorcrafts
[#1168] (https://github.com/paparazzi/paparazzi/pull/1168)
- fix mission module for rotorcrafts
Simulation
----------
- NPS: add possibility to simulate loss of datalink/downlink
[#1150] (https://github.com/paparazzi/paparazzi/pull/1150)
- NPS: update FDM bindings to be compatible with latest JSBSim
[#1118] (https://github.com/paparazzi/paparazzi/pull/1118)
- remove jsbsim target (fully replaced by NPS)
[#1123] (https://github.com/paparazzi/paparazzi/pull/1123)
- build: don't add full path to NPS object files
[#798] (https://github.com/paparazzi/paparazzi/issues/798)
- NPS simulator: fix sensor simulation issues
[#1131] (https://github.com/paparazzi/paparazzi/pull/1131)
[#1132] (https://github.com/paparazzi/paparazzi/pull/1132)
- NPS/FlightGear: add models for easystar (with ailerons) and Eternity
[#1159] (https://github.com/paparazzi/paparazzi/pull/1159)
- Updated FlightGear interface and removed obsolete HITL files
[#1196] (https://github.com/paparazzi/paparazzi/pull/1196)
- NPS: support gaia environment simulator
[#1219] (https://github.com/paparazzi/paparazzi/pull/1219)
Linux arch support
------------------
- rewrite of the linux video modules
[#1094] (https://github.com/paparazzi/paparazzi/pull/1094)
[#1143] (https://github.com/paparazzi/paparazzi/pull/1143)
- change the sys timer to a multi threaded implementation
[#1117] (https://github.com/paparazzi/paparazzi/pull/1117)
- implement persistent settings
[#1109] (https://github.com/paparazzi/paparazzi/pull/1109)
- refactor UDP support
[#1120] (https://github.com/paparazzi/paparazzi/pull/1120)
[#1122] (https://github.com/paparazzi/paparazzi/pull/1122)
[#1158] (https://github.com/paparazzi/paparazzi/pull/1158)
- fix UART driver
[#1110] (https://github.com/paparazzi/paparazzi/pull/1110)
- sys_time: get time from CLOCK_MONOTONIC
[#1128] (https://github.com/paparazzi/paparazzi/pull/1128)
- I2C: use 8 bit I2C address scheme for all drivers
[#1210] (https://github.com/paparazzi/paparazzi/issues/1210)
- limit main loop to 1kHz to prevent 100% cpu usage due to event polling
[#1240] (https://github.com/paparazzi/paparazzi/pull/1240)
other drivers/HW support
------------------------
- remove support for ARDrone2 SDK version
[#1222] (https://github.com/paparazzi/paparazzi/pull/1222)
- ARDrone2: add support for dynamic Ad-Hoc networking with OSLR
[#1097] (https://github.com/paparazzi/paparazzi/pull/1097)
- Parrot Bebop: support all sensors including sonar
[#1149] (https://github.com/paparazzi/paparazzi/issues/1149)
[#1182] (https://github.com/paparazzi/paparazzi/pull/1182)
- boards: add support for CC3D
- IMU: support for MPU9250 ins SPI mode
[#1161] (https://github.com/paparazzi/paparazzi/pull/1161)
- peripherals: ms5611 driver now also supports ms5607 (e.g. for Bebop)
[#1147] (https://github.com/paparazzi/paparazzi/pull/1147)
- mcu_periph: move mcu peripheral event functions to common mcu_event
- mcu_periph: increase max size for spi buffer length (8bits to 16bits)
- arch/stm32: use desig_get_unique_id from libopencm3
[#1018] (https://github.com/paparazzi/paparazzi/pull/1018)
- peripherals: SD Card SPI interface
[#1220] (https://github.com/paparazzi/paparazzi/pull/1220)
Paparazzi 5.4.2_stable
======================
Maintenance release
- GCS: fix undo for list of values
[#1054] (https://github.com/paparazzi/paparazzi/issues/1054)
- lisa_mx: fix secondary spektrum satellite UART AF
- logalizer: fix csv export after allowing description tag in messages
- nps: update nps_fdm_jsbsim to be compatible with latest jsbsim
[#1118] (https://github.com/paparazzi/paparazzi/pull/1118)
- rotorcraft: fix attitude flight plan primitive
[#1103] (https://github.com/paparazzi/paparazzi/pull/1103)
- flight plans: fix 'call' statement without loop
- generators: only include raw makefile part from modules if target matches
- GCS: GPS accuracy speech less verbose
[#1046] (https://github.com/paparazzi/paparazzi/issues/1046)
- GCS: call index of first/single link "single"
[#1098] (https://github.com/paparazzi/paparazzi/issues/1098)
Paparazzi 5.4.1_stable
======================
Maintenance release
- plot: fix loading of logs with strings that are not representing a float
- log: prevent display when no points
[#897] (https://github.com/paparazzi/paparazzi/issues/897)
- GCS: disable broken WP reordering in editor
- GCS: fix last known value was not returned with correct scale for saving
- paparazzi center: show build/run versions and update help
- messages: fix hide/show of notebook with multi A/C
- start.py: properly use Popen to start paparazzi subprocess
- bebop: actuators left/right reversed and fix NPS config
- ms5611 barometer peripheral: fix I2C transaction
- sdlog: call pprzlog_init if needed (and avoid segfault)
- datalink: fix extra_dl and pprzlog
- current sensor subsystem shared and not only for fixedwing
- arch/linux: GCC diagnostic pragma outside of i2c_submit function
- arch/linux: use same float_abi for linking as for compiling
- arch/stm32: fix spektrum binding on F4
[#780] (https://github.com/paparazzi/paparazzi/issues/780)
Paparazzi 5.4.0_stable
======================
Stable version release.
- messages: MOVE_WP and WP_MOVED_LLA with altitude in mm
- ins: immediately effective ins_reset_local_origin
- server: don't fail if settings_modules is missing
- python: messagesapp: growable value column width
- python: add python real time plotter to control panel
- module: mavlink, parse PARAM_SET, send origin and waypoints
- module: FLAPS, HATCH, BRAKE via RC in AUTO1
[#878] (https://github.com/paparazzi/paparazzi/pull/878)
- fixedwing: use min/max_cruise_throttle variables instead of defines
[#1057] (https://github.com/paparazzi/paparazzi/issues/1057)
- GCS: turn off search in flight plan panel to fix hotkeys
[#995] (https://github.com/paparazzi/paparazzi/issues/995)
[#1061] (https://github.com/paparazzi/paparazzi/pull/1061)
- GCS: fixes for flight plan editor and keeping map center on zoom
[#927] (https://github.com/paparazzi/paparazzi/issues/927)
[#1059] (https://github.com/paparazzi/paparazzi/pull/1059)
- stm32/luftboot: update libopencm3 to get usb control call back fix
[#1058] (https://github.com/paparazzi/paparazzi/pull/1058)
Paparazzi 5.3.3_testing
=======================
Fourth release candidate for v5.4 stable release.
- tmtc: fix rx_lost_time in link
- paparazzicenter: fix GLib-CRITICAL warning when running clean/build/upload
- server: write paparzzi_version as comment at beginning of log file
[#1049] (https://github.com/paparazzi/paparazzi/pull/1049)
- replace BOOT message with AUTOPILOT_VERSION, show in GCS and add build version
[#1050] (https://github.com/paparazzi/paparazzi/pull/1050)
- GCS: fix green color after colormap changes on some new systems
[#1051] (https://github.com/paparazzi/paparazzi/pull/1051)
[#575] (https://github.com/paparazzi/paparazzi/issues/575)
- settings: display ? for current value on undo
[#1054] (https://github.com/paparazzi/paparazzi/issues/1054)
- Add some more flexibility to conf and control_panel naming
[#1055] (https://github.com/paparazzi/paparazzi/pull/1055)
Paparazzi 5.3.2_testing
=======================
Third release candidate for v5.4 stable release.
- code style: fix in (nearly) all airborne code
- support Piksi GPS modules
[#1043] (https://github.com/paparazzi/paparazzi/pull/1043)
[#957] (https://github.com/paparazzi/paparazzi/issues/957)
- fixedwing: airspeed tuning
[#877] (https://github.com/paparazzi/paparazzi/pull/877)
- linux: handle SIGINT for console debug
[#1008] (https://github.com/paparazzi/paparazzi/pull/1008)
- rotorcraft: always allow to switch to MODE_MANUAL via RC
[#1036] (https://github.com/paparazzi/paparazzi/pull/1036)
- flight plan: use flight plan position in nps for most example files
- airframes: OBC example airframes
[#1044] (https://github.com/paparazzi/paparazzi/pull/1044)
- transitioning: fix transition offset handling
[#1045] (https://github.com/paparazzi/paparazzi/pull/1045)
Paparazzi 5.3.1_testing
=======================
Second release candidate for v5.4 stable release.
- modules: nav_survey_poly_osam improvements
[#938] (https://github.com/paparazzi/paparazzi/pull/938)
- ARDrone2: mag freeze detection
[#1025] (https://github.com/paparazzi/paparazzi/pull/1025)
[#1026] (https://github.com/paparazzi/paparazzi/pull/1026)
[#1030] (https://github.com/paparazzi/paparazzi/pull/1030)
- ARDrone2: remove unneeded last_checksum_wrong
[#1032] (https://github.com/paparazzi/paparazzi/pull/1032)
- rotorcraft: fix USE_KILL_SWITCH_FOR_MOTOR_ARMING
[#1038] (https://github.com/paparazzi/paparazzi/pull/1038)
- server: log LINK_REPORT message
[#1031] (https://github.com/paparazzi/paparazzi/issues/1031)
- stm32: partial Lisa MX luftboot support
[#1017] (https://github.com/paparazzi/paparazzi/pull/1017)
Paparazzi 5.3.0_testing
=======================
First release candidate for v5.4 stable release.
General
-------
- Flight plans: option to `call` functions once without checking return value
[830] (https://github.com/paparazzi/paparazzi/pull/830)
- Paparazzi Center settings improvements
[#834] (https://github.com/paparazzi/paparazzi/pull/834)
- replay: ignore non-telemetry messages to remove warnings
[#894] (https://github.com/paparazzi/paparazzi/issues/894)
- maps: put google tiles in var/maps/Google instead of var/maps
[#902] (https://github.com/paparazzi/paparazzi/issues/902)
- Paparazzi Center: improve warning coloring
[#910] (https://github.com/paparazzi/paparazzi/issues/910)
- add INFO_MSG with printing to GCS console
[#929] (https://github.com/paparazzi/paparazzi/pull/929)
- Remove array delimiters on Ivy messages
[#942] (https://github.com/paparazzi/paparazzi/pull/942)
- improve test framework
[#933] (https://github.com/paparazzi/paparazzi/pull/933)
[#945] (https://github.com/paparazzi/paparazzi/pull/945)
- GCS: save size in layout
[#968] (https://github.com/paparazzi/paparazzi/issues/968)
- link/GCS: improve datalink/telemetry report and display link page in GCS for single link
[#999] (https://github.com/paparazzi/paparazzi/pull/999)
- build: default to parallel make for aircrafts
[#1002] (https://github.com/paparazzi/paparazzi/pull/1002)
- select_conf.py fixes and also selects control_panel.xml
[#1001] (https://github.com/paparazzi/paparazzi/pull/1001)
- DFU flashing: CRC support and longer timeout for Krooz
[#997] (https://github.com/paparazzi/paparazzi/pull/997)
[#691] (https://github.com/paparazzi/paparazzi/pull/691)
- messages: possibility to add descriptions
[#987] (https://github.com/paparazzi/paparazzi/pull/987)
- messages: mission modules use LLA waypoints in 1e7deg instead of float
[#986] (https://github.com/paparazzi/paparazzi/pull/986)
- GCS: alert/console window: always insert messages at the end
[#996] (https://github.com/paparazzi/paparazzi/issues/996)
- improve dependency handling for modules
[#1007] (https://github.com/paparazzi/paparazzi/pull/1007)
- Settings: display unconfirmed settins with "?" as current value
[#1013] (https://github.com/paparazzi/paparazzi/pull/1023)
- messages/plotter: improve drag-and-drop of fields from messages to realtime plotter
[#1020] (https://github.com/paparazzi/paparazzi/pull/1020)
Simulation
----------
- OCaml sim: simulate sys_time
[#962] (https://github.com/paparazzi/paparazzi/issues/962)
- OCaml sim: use unconnected socket for flightgear viz
[#915] (https://github.com/paparazzi/paparazzi/issues/915)
- NPS: add commandline option to set time_factor
- radio_conrol spektrum for sim target
[#851] (https://github.com/paparazzi/paparazzi/pull/851)
- OCaml sim: sliders in simulated RC always sensitive
[#821] (https://github.com/paparazzi/paparazzi/issues/821)
Airborne
--------
- pass dt to ahrs/ins propagation
[#818] (https://github.com/paparazzi/paparazzi/pull/818)
- cleanup math lib and convert lots of macros to functions
[#819] (https://github.com/paparazzi/paparazzi/pull/819)
- radio_control spektrum also usable for intermcu
[#847] (https://github.com/paparazzi/paparazzi/pull/847)
- Replace telemetry macros with functions
[#931] (https://github.com/paparazzi/paparazzi/pull/931)
[#1027] (https://github.com/paparazzi/paparazzi/pull/1027)
- arch: rename arch/omap to arch/linux
[#982] (https://github.com/paparazzi/paparazzi/pull/982)
- radio_control: cleanup channel defines and possibility to send less than available via intermcu
[#975] (https://github.com/paparazzi/paparazzi/pull/975)
- state interface: change computation order in stateCalcPositionLla_i
[#1013] (https://github.com/paparazzi/paparazzi/pull/1013)
- ARDrone2: Handle memory full FTP upload error
[#967] (https://github.com/paparazzi/paparazzi/issues/967)
- rotorcraft: force MODE_STARTUP instead of KILL until ahrs is aligned
[#983] (https://github.com/paparazzi/paparazzi/pull/983)
- rotorcraft: fix NavCircleCount()
- rotorcraft: datalink: check ac_id of RC_4CH message
- rotorcraft: allow to turn off motors in failsafe mode
[#989] (https://github.com/paparazzi/paparazzi/pull/989)
Modules
-------
- Convert air_data subsystem to module with QNH and true airspeed support
[#853] (https://github.com/paparazzi/paparazzi/pull/853)
- add airspeed_ms45xx_i2c module
[#852] (https://github.com/paparazzi/paparazzi/pull/852)
- airspeed_ets, retry after failed transaction
- add temperature adc module
[#857] (https://github.com/paparazzi/paparazzi/pull/857)
- clean up digital_cam, usable for rotorcrafts, show real photo coordinates in GCS
[#936] (https://github.com/paparazzi/paparazzi/pull/936)
- modules: add basic mavlink module
[#1028] (https://github.com/paparazzi/paparazzi/pull/1028)
- modules: improved video/images sending for ARDrone2
[#1021]: (https://github.com/paparazzi/paparazzi/pull/1021)
Drivers/HW support
------------------
- stm32: usb_serial (CDC) impelmentation for transparent_usb telemetry
[#998] (https://github.com/paparazzi/paparazzi/pull/998)
- stm32: add usb_tunnel
[#1014] (https://github.com/paparazzi/paparazzi/pull/1014)
- Add Furuno NMEA based GPS
[#959] (https://github.com/paparazzi/paparazzi/pull/959)
- Driver for MPU9250
[#953] (https://github.com/paparazzi/paparazzi/pull/953)
- Driver for AKM8963 magnetometer
[#947] (https://github.com/paparazzi/paparazzi/pull/947)
- linux: add basic I2C and SPI drivers
[#961] (https://github.com/paparazzi/paparazzi/pull/961)
[#979] (https://github.com/paparazzi/paparazzi/pull/979)
- actuators: basic esc32 motor controller implementation via CAN for STM32F1
[#1004] (https://github.com/paparazzi/paparazzi/pull/1004)
- basic support for new Parrot Bebop
[#1003] (https://github.com/paparazzi/paparazzi/pull/1003)
Paparazzi 5.2.1_stable
======================
Maintenance release
- build system: remove 'load' target as it is a builtin directive in Make 4.0
- fix FlightGear visualization on 32bit systems
- flight plans: set primitive should not delay next stage
[#824] (https://github.com/paparazzi/paparazzi/pull/824)
- flight plans: fix return primitive
- generators: gen_airframe: don't force float if unit = code_unit
- sys_time: up to 16 sys_time timers by default (was 8)
- OCaml: fix Pprz.sprint_value for uint32, e.g. for NatNet
[#831] (https://github.com/paparazzi/paparazzi/issues/831)
- Rotorcraft: auto-enable UNLOCKED_HOME_MODE if HOME mode is used on RC
[#823] (https://github.com/paparazzi/paparazzi/issues/823)
- Rotorcraft: only go to HOME mode if in NAV
[#850] (https://github.com/paparazzi/paparazzi/issues/850)
- Fixedwing: If USE_BARO_BOARD: separate baro timer
Before baro_periodic was running at PERIODIC_FREQUENCY in sensors_task,
which is too fast for ms5611 if periodic freq is > 100Hz.
- INS alt_float: if USE_BARO_BOARD, dt is 1/BARO_PERIODIC_FREQUENCY
[#848] (https://github.com/paparazzi/paparazzi/pull/848)
- STM32: backport fix for using multiple ADs
[#822] (https://github.com/paparazzi/paparazzi/pull/822)
- LPC21: don't override T0CCR values when setting ppm and trig_ext
- IMU driver for Lisa/M/MX 2.1
[#817] (https://github.com/paparazzi/paparazzi/pull/817)
- support for HBmini board
[#864] (https://github.com/paparazzi/paparazzi/pull/864)
Paparazzi 5.2.0_stable
=======================
Stable version release.
General
-------
- ocaml/link: fix uint32 parsing
[#809] (https://github.com/paparazzi/paparazzi/pull/809)
- modules: use VPATH to make it easier to load external modules
[#760] (https://github.com/paparazzi/paparazzi/pull/760)
- ground_segment: try to update AGL even if GPS is lost
[#742] (https://github.com/paparazzi/paparazzi/issues/742)
- ground_segment: different icons for the different applications of paparazzi
[#787] (https://github.com/paparazzi/paparazzi/pull/787)
- generators: fix generated longitude in 1e7deg on 32bit systems
[#808] (https://github.com/paparazzi/paparazzi/issues/808)
- lat/lon int in 1e7deg instead of 1e7rad
[#810] (https://github.com/paparazzi/paparazzi/pull/810)
- GCS: fix inaccurate waypoint updates
[#762] (https://github.com/paparazzi/paparazzi/issues/762)
- GCS: add exponentiation operator to papgets
- logalizer: export lat/lon with 9 decimal places
- GCS: display AP mode forward correctly
[#748] (https://github.com/paparazzi/paparazzi/pull/748)
- GCS: also center aircraft on uppercase C and fix listed keys in help
[#803] (https://github.com/paparazzi/paparazzi/issues/803)
- settings: add spin button widget for numeric input instead of sliders
[#795] (https://github.com/paparazzi/paparazzi/issues/795)
- tools: flash via bmp: reset and detach from target after uploading
[#746] (https://github.com/paparazzi/paparazzi/issues/746)
- tools: DFU flashing: allow 1 BIT SQUARED vendor
[#778] (https://github.com/paparazzi/paparazzi/pull/778)
- tools: add tcp_aircraft_server
[#750] (https://github.com/paparazzi/paparazzi/pull/750)
- tools: add tool to syncronize video on replay
[#770] (https://github.com/paparazzi/paparazzi/pull/770)
[#776] (https://github.com/paparazzi/paparazzi/pull/776)
[#789] (https://github.com/paparazzi/paparazzi/pull/789)
- messages: rename class to msg_class
[#812] (https://github.com/paparazzi/paparazzi/pull/812)
- messages: add GEO_MAG message to send magnetic field
[#735] (https://github.com/paparazzi/paparazzi/pull/735)
- messages: add speed setpoint to GUIDANCE_H_REF_INT message
[#763] (https://github.com/paparazzi/paparazzi/issues/763)
- NPS: block and setting messages only parsed for correct AC_ID
[#777] (https://github.com/paparazzi/paparazzi/pull/777)
- NPS: fix warnings when compiling with clang
[#790] (https://github.com/paparazzi/paparazzi/pull/790)
- gaia: command line options for environment simulator
[#799] (https://github.com/paparazzi/paparazzi/issues/799)
- build: only set PAPARAZZI_SRC if not already externally set
[#800] (https://github.com/paparazzi/paparazzi/issues/800)
Airborne
--------
- fixedwing: correct altitude setpoint during NavGlide
[#785] (https://github.com/paparazzi/paparazzi/pull/785)
- flight plans: don't set nav_pitch to 0 at each stage init
[#727] (https://github.com/paparazzi/paparazzi/pull/727)
- modules: gps_ubx_ucenter: fix version check for Ublox 7
- modules: add HackHD digital camera control module
- modules: add CSV file logger for ARDrone
[#788] (https://github.com/paparazzi/paparazzi/pull/788)
- modules: geo_mag: fixedwing compatibility
[#806] (https://github.com/paparazzi/paparazzi/issues/806)
- ardrone2: mag freeze fix
[#767] (https://github.com/paparazzi/paparazzi/pull/767)
- boards: add support for navstik
[#744] (https://github.com/paparazzi/paparazzi/pull/744)
- boards: fix PWM on lisa_l
- boards: lisa_m_2.0: baro defaults to BARO_MS5611_SPI
- peripherals: ms5611: check temp an pressure range
[#758] (https://github.com/paparazzi/paparazzi/issues/758)
- imu: aspirin_2_spi: wait 1.5s before configuring mag
[#779] (https://github.com/paparazzi/paparazzi/pull/779)
- imu: body_to_imu adjustable during runtime via settings
[#783] (https://github.com/paparazzi/paparazzi/pull/783)
- ahrs: int_cmpl_quat: fix rate integration range/resolution
[#782] (https://github.com/paparazzi/paparazzi/pull/782)
- ins: properly define INS_VFF_R_GPS
[#741] (https://github.com/paparazzi/paparazzi/issues/741)
- ins: allow define of VFF_R_SONAR_OF_M
[#764] (https://github.com/paparazzi/paparazzi/issues/764)
- electrical: min bat level check
[#745] (https://github.com/paparazzi/paparazzi/issues/745)
- electrical: fix for negative currents
[#753] (https://github.com/paparazzi/paparazzi/issues/753)
- electrical: 32bit for bat low and critical counters for longer delays
[#805] (https://github.com/paparazzi/paparazzi/issues/805)
- messages: dist_home and dist_wp in meters for fixedwings and rotorcrafts
[#784] (https://github.com/paparazzi/paparazzi/pull/784)
- superbitrf: save bind settings to flash (if USE_PERSISTENT_SETTINGS)
[#792] (https://github.com/paparazzi/paparazzi/issues/792)
Rotorcraft Firmware
-------------------
- RC input: zero yaw command if throttle is zero
[#737] (https://github.com/paparazzi/paparazzi/pull/737)
- prevent motor arming in kill mode
[#740] (https://github.com/paparazzi/paparazzi/pull/740)
- change rotorcraft nav API to use points rather than wp id
[#749] (https://github.com/paparazzi/paparazzi/pull/749)
- use roll/pitch RC deadbands in attitude mode
[#773] (https://github.com/paparazzi/paparazzi/pull/773)
- route precision fix
[#775] (https://github.com/paparazzi/paparazzi/pull/775)
- guidance_v: limit z_ref in update_ref_from_zd_sp
[#754] (https://github.com/paparazzi/paparazzi/pull/754)
- mission module for rotorcrafts
[#759] (https://github.com/paparazzi/paparazzi/pull/759)
- guidance_v: only limit throttle if RC ok
[#766] (https://github.com/paparazzi/paparazzi/pull/766)
- navigation: fix waypoint initialization in ENU
[#791] (https://github.com/paparazzi/paparazzi/pull/791)
STM32 architecture
------------------
- fix I2C bitrate on F4
[#729] (https://github.com/paparazzi/paparazzi/pull/729)
- fix sys_time_usleep
[#739] (https://github.com/paparazzi/paparazzi/pull/739)
- fix spektrum on F4
[#732] (https://github.com/paparazzi/paparazzi/pull/732)
- timer frequency cleanup
[#734] (https://github.com/paparazzi/paparazzi/pull/734)
- split spektrum uart rx and config pin for Apogee
[#733] (https://github.com/paparazzi/paparazzi/pull/733)
- add suport for pwm input
- fix reset for I2C3
[#751] (https://github.com/paparazzi/paparazzi/pull/751)
- simplify actuators_pwm
[#757] (https://github.com/paparazzi/paparazzi/pull/757)
- boards: add files for Lisa/M and Lisa/MX v2.1
[#813] ((https://github.com/paparazzi/paparazzi/pull/813)
- spektrum: configure the bind pin to be pullup/pulldown
[#814] (https://github.com/paparazzi/paparazzi/pull/814)
Paparazzi 5.1.1_testing
=======================
Second release candidate for v5.2 stable release.
General
-------
- GCS: higher default maps zoom level
[#725] (https://github.com/paparazzi/paparazzi/pull/725)
- Allow settings/modules/flightplans outside the conf dir
[#723] (https://github.com/paparazzi/paparazzi/pull/723)
- optitrack: Give feedback about following drones and fix gps
[#718] (https://github.com/paparazzi/paparazzi/pull/718)
- dfu-util: only attempt verify for version >= 0.7
[#697] (https://github.com/paparazzi/paparazzi/issues/697)
- dfu-util: fix DFU_SIZE on OSX
- add prototype for python based airframe file editor
Airborne
--------
- Modules: rewrite humid_sht using gpio interface (supporting STM as well as LPC now)
[#721] (https://github.com/paparazzi/paparazzi/pull/721)
- INS int: removed INS_SONAR_VARIANCE_THRESHOLD, INS_SONAR_MIN_RANGE defaults to 1mm
- fix compilation of SuperbitRF telemetry subsystem
- possibility to poweron gps and imu via gpio at init
[#706] (https://github.com/paparazzi/paparazzi/pull/706)
- bmp085 peripheral: Fix calibration reading with errors
Simulation
----------
- NPS: simulate sonar sensor
[#720] (https://github.com/paparazzi/paparazzi/pull/720)
- JSBSim, NPS: fix roll input sign
- NPS: fixedwing simulation improvements
- If NPS_JSBSIM_LAUNCHSPEED is defined, set it as initial launchspeed.
- Only launch when launch button is pressed in GCS instead of immediately at takeoff block.
Rotorcraft firmware
-------------------
- add some functions to set heading via flight plan
[#724] (https://github.com/paparazzi/paparazzi/pull/724)
- fix reference in hover with USE_SPEED_REF, set DEFAULT_CIRCLE_RADIUS to 5m
[#716] (https://github.com/paparazzi/paparazzi/issues/716)
[#717] (https://github.com/paparazzi/paparazzi/pull/717)
- implement approaching_time for "go" flight plan primitve
[#715] (https://github.com/paparazzi/paparazzi/pull/715)
Fixedwing firmware
------------------
- stabilization adaptive: loiter correction and reference generator update
[#711] (https://github.com/paparazzi/paparazzi/pull/711)
- stabilization new/adaptive: USE_GYRO_PITCH_RATE defaults to TRUE
- dual mcu: Workaround RADIO_CONTROL_NB_CHANNELS differs in driver and radio.h
[#700] (https://github.com/paparazzi/paparazzi/pull/700)
Paparazzi 5.1.0_testing
=======================
First release candidate for next stable release.
General
-------
- lots of cleanup
- GCS: higher max zoom level
[#632] (https://github.com/paparazzi/paparazzi/issues/632)
- GCS: different aircraft icons (added flying wing, quadrotor)
- GCS: proper GPSd home icon resizing
[#601] (https://github.com/paparazzi/paparazzi/issues/601)
- GUI for selecting the desired active list of airframes (select_conf.py)
[#536] (https://github.com/paparazzi/paparazzi/issues/536)
- paparazzi center: flash mode selection via drop down menu
[#597] (https://github.com/paparazzi/paparazzi/pull/597)
- add support for new telemetry types
[#589] (https://github.com/paparazzi/paparazzi/pull/589)
- build aircraft firmware in var/aircrafts/'ac_name'
[#601] (https://github.com/paparazzi/paparazzi/issues/601)
- parallel build of firmwares with J=AUTO
[#683] (https://github.com/paparazzi/paparazzi/pull/683)
- add simple verify to flashing via dfu-util
[#673] (https://github.com/paparazzi/paparazzi/pull/673)
- app_server: connection between the ground station and a GCS Android application
(https://github.com/paparazzi/PPRZonDroid)
- GCS: adapt home (from GPSd) icon to zoom level
[#679] (https://github.com/paparazzi/paparazzi/issues/679)
Simulation
----------
- simulate datalink loss
[#631] (https://github.com/paparazzi/paparazzi/issues/631)
- FlightGear viz: daytime everywhere
[#555] (https://github.com/paparazzi/paparazzi/issues/555)
Hardware support
----------------
- remove sys_plugs for STM32, finally dropping old toolchain support
[#688] (https://github.com/paparazzi/paparazzi/pull/688)
- Support for all 3 ADCs of F4
[#551] (https://github.com/paparazzi/paparazzi/issues/551)
- new peripheral drivers:
- ST LIS302DL accelerometer (SPI)
- ST L3GD20 gyro (SPI)
- ST LSM303DLHC 3D accelerometer and magnetometer (I2C)
- converted barometers MS5611, BMP085 to generic peripherals
[#515] (https://github.com/paparazzi/paparazzi/pull/515)
- I2C watchdog for STM32
[#662] (https://github.com/paparazzi/paparazzi/pull/662)
- Dual PWM servo driver
[#678] (https://github.com/paparazzi/paparazzi/pull/678)
- SBus radio control driver (single and dual receivers)
[#485] (https://github.com/paparazzi/paparazzi/pull/485)
[#674] (https://github.com/paparazzi/paparazzi/pull/674)
[#693] (https://github.com/paparazzi/paparazzi/pull/693)
Airborne
--------
- API function to periodically send telemetry messages: register_periodic_telemetry
[#472] (https://github.com/paparazzi/paparazzi/pull/472)
- generic gpio interface
[#498] (https://github.com/paparazzi/paparazzi/issues/498)
[#651] (https://github.com/paparazzi/paparazzi/issues/651)
- gps_ubx_ucenter module improvements
[#646] (https://github.com/paparazzi/paparazzi/issues/646)
[#653] (https://github.com/paparazzi/paparazzi/issues/653)
- HOTT telemetry module added
[#591] (https://github.com/paparazzi/paparazzi/pull/591)
- GPS subsystem to stream external position data to the vehicle over UDP
[#630] (https://github.com/paparazzi/paparazzi/pull/630)
- INS reset/realign API updates
[#644] (https://github.com/paparazzi/paparazzi/pull/644)
- INS alt_float: remove ALT_KALMAN_ENABLED
[#594] (https://github.com/paparazzi/paparazzi/issues/594)
- IIR filter for horizontal position Kalman Filter
[#677] (https://github.com/paparazzi/paparazzi/pull/677)
- barometer interface via ABI
[#525] (https://github.com/paparazzi/paparazzi/pull/525)
- baros always output pressure in Pascal
- standard atmosphere model is used to convert pressure to altitude
- INS_BARO_SENS is hence not needed anymore
- sonar interface using ABI
[#654] (https://github.com/paparazzi/paparazzi/pull/654)
- AHRS int_cmpl_quat frequency scaling
[#371] (https://github.com/paparazzi/paparazzi/pull/371)
Rotorcraft firmware
-------------------
- AR Drone 2 updates
[#626] (https://github.com/paparazzi/paparazzi/issues/626)
[#598] (https://github.com/paparazzi/paparazzi/pull/598)
- guidance improvements
[#539] (https://github.com/paparazzi/paparazzi/pull/539)
[#546] (https://github.com/paparazzi/paparazzi/pull/546)
- horizontal guidance: dynamically adjustable max_speed
[#664] (https://github.com/paparazzi/paparazzi/pull/664)
- adaptive thrust estimation limits
[#495] (https://github.com/paparazzi/paparazzi/issues/495)
- improve in_flight detection heuristic
[#469] (https://github.com/paparazzi/paparazzi/pull/469)
- stabilization quaternion: fix scale of angle in 2nd order model
[#664] (https://github.com/paparazzi/paparazzi/pull/663)
- HITL using reference position to fake GPS
[#640] (https://github.com/paparazzi/paparazzi/pull/640)
- add a HOME mode
[#562] (https://github.com/paparazzi/paparazzi/pull/562)
- nav: split waypoint proximity check from time spend at waypoint
[#690] (https://github.com/paparazzi/paparazzi/pull/690)
Fixedwing firmware
------------------
- alt_float: remove ALT_KALMAN_ENABLED
[#594] (https://github.com/paparazzi/paparazzi/issues/594)
- extra navigation routines as modules
[#512] (https://github.com/paparazzi/paparazzi/pull/512)
- NavSetAltitudeReferenceHere added
Paparazzi 5.0.5_stable
======================
Maintenance release
- fix field order in HFF_DBG message
- fix altitude in some extra nav routines
- fix create_module tool
- fix RCLost macro
- add GetAltRef() for flight plan compatibility with v5.2
Paparazzi 5.0.4_stable
======================
Maintenance release
- fix perl script compile_all_test_targets
- add pcre lib to jsbsim, cleanup shell commands
- fix InsideX for sectors (GetPosX and GetPosY in nav.h (FW) are in local coordinates)
[#602] (https://github.com/paparazzi/paparazzi/issues/602)
- stm32: enable correct error interrupts for i2c2 and i2c3
Paparazzi 5.0.3_stable
======================
Maintenance release
- fix Paparazzi Center on Mac OS (detection of child processes exitting)
[#290] (https://github.com/paparazzi/paparazzi/issues/290)
- state interface: fix stateCalcHorizontalSpeedNorm_i
- fix/improve dependency generation for building firmware
- abort with meaningful error if ARM toolchain is not found
Paparazzi 5.0.2_stable
======================
Maintenance release
- add launch and noground options to pprzsim-launch
- fixedwing: fix initialzation of trim commands, including yaw
- fixedwing: fixes to use ins_alt_dot from ins_alt_float (with USE_BAROMETER)
[#511] (https://github.com/paparazzi/paparazzi/pull/511)
- state interface: fix local/global coordinate validity checks
- state interface: fix local ned/enu to ecef conversion
- lib/ocaml: update leap_seconds to 16 (last one was on June 30, 2012)
Paparazzi 5.0.1_stable
======================
Maintenance release
General
-------
- joystick hat support for input2ivy
[#460] (https://github.com/paparazzi/paparazzi/pull/460)
- high speed logger: fix mag channels
- math: fix ecef_of_[ned|enu]_i
- fix google maps version download parsing
Rotorcraft/Fixedwing firmwares
------------------------------
- rotorcraft: add MODE_STARTUP
[#467] (https://github.com/paparazzi/paparazzi/pull/467)
- ARDrone2: GPS satellite informaton
[#474] (https://github.com/paparazzi/paparazzi/pull/474)
- fixedwing: init state interface before sensors and ins
- fixedwing: don't overwrite yaw command with trim
Simulator
---------
- NPS: explicitly add pcre lib
- NPS: make radio_control tpye datalink work
- don't try to use ADC_CHANNEL_CURRENT in SITL
Drivers and architecture specific
---------------------------------
- fixes for imu_drotek_10dof_v2
- init spi_slave_hs for imu_chimu
- mpu60x0_i2c: only copy ext data if i2c_bypass is false
- aspirin_v2.2: unselect baro at startup
- aspirin_2_spi: default AHRS_PROPAGATE_FREQUENCY is 512
- STM32F4: fix ppm input timer frequency for TIM2
- add i2c3 initialization
Paparazzi 5.0.0_stable
======================
Stable version release
General
-------
- STM libs completely replaced by libopencm3
- [gcc-arm-embedded] (https://launchpad.net/gcc-arm-embedded) is the new recommended toolchain
- Use findlib (ocamlfind) for ocaml packages. Faster build.
[#274] (https://github.com/paparazzi/paparazzi/pull/274)
- Building/Running the groundsegment on an ARM (e.g. RaspberryPi).
- Input2ivy uses SDL for joysticks (cross-platform, works on OSX as well now)
[#220] (https://github.com/paparazzi/paparazzi/pull/220)
- Option to change text papget color using a combobox
[#194] (https://github.com/paparazzi/paparazzi/pull/194)
- Redundant communications
[#429] (https://github.com/paparazzi/paparazzi/pull/429)
- Log also contains includes like procedures now, so replay if these missions is possible.
[#227] (https://github.com/paparazzi/paparazzi/issues/227)
- Paparazzi Center
- New simulation launcher with dialog and detection of available ones.
[#354] (https://github.com/paparazzi/paparazzi/pull/354)
- Checkbox to print extra configuration information during build.
- GCS:
- Fix panning with mouse if there are no background tiles.
[#9] (https://github.com/paparazzi/paparazzi/issues/9)
- Higher zoom level for maps.
[#277] (https://github.com/paparazzi/paparazzi/issues/277)
Hardware support
----------------
- initial support for STM32F4
- Apogee autopilot
- KroozSD autopilot
- Parrot AR Drone 2 support: raw and sdk versions
- CH Robotics UM6 IMU/AHRS
- GPS/INS XSens Mti-G support
- GPS Sirf support
- GPS Skytraq now usable for fixedwings as well
[#167] (https://github.com/paparazzi/paparazzi/issues/167)
- Mikrokopter V2 BLDC
[#377] (https://github.com/paparazzi/paparazzi/pull/377)
- PX4Flow sensor
[#379] (https://github.com/paparazzi/paparazzi/pull/379)
- Dropped AVR support
Airborne
--------
- State interface with automatic coordinate transformations
[#237] (https://github.com/paparazzi/paparazzi/pull/237)
- New AHRS filter: Multiplicative quaternion linearized Kalman Filter
- New SPI driver with transaction queues.
- Fix transactions with zero length input.
[#348] (https://github.com/paparazzi/paparazzi/issues/348)
- Peripherals: Cleanup and refactoring.
- MPU60x0 peripheral supporting SPI and I2C with slave.
- UDP datalink.
- Magnetometer current offset calibration.
[#346] (https://github.com/paparazzi/paparazzi/pull/346)
- Gain scheduling module.
[#335] (https://github.com/paparazzi/paparazzi/pull/335)
Rotorcraft firmware specific
----------------------------
- Quadshot transitioning vehicle support.
- Care Free Mode
Paparazzi 4.2.2_stable
======================
Maintenance release
- DFU upload matches Lia board by default as well
- partial compatibilty with Aspirin2.2
[#369] (https://github.com/paparazzi/paparazzi/pull/369)
- fix failsafe vertical setpoint in rotorcraft firmware
- fix plotprofile building on Ubuntu 13.04
- circle-count without rewinding when flying in opposite direction
[#441] (https://github.com/paparazzi/paparazzi/pull/441)
- add yaw trim
[#444] (https://github.com/paparazzi/paparazzi/pull/444)
- add XSens Mti-G 700 support
[#443] (https://github.com/paparazzi/paparazzi/pull/443)
Paparazzi 4.2.1_stable
======================
Maintenance release
- fix elf PT_LOAD type in lpc21iap LPC USB download
- fix electrical.current estimate in sim
- fix LPC+xbee_api in rotorcraft
- fix conversion of vsupply to decivolts if offset is used
- more robust dfu flash script, only upload to Lisa/M
Paparazzi 4.2.0_stable
======================
Stable version release
Since last stable v4.0:
- Total energy control
- Improve Google map tiles download
- Several updates on the Digital Cam and photogrammetry modules
- WMM210 model
- Rate limiter in airframes control laws
- Uart flow control (stm32)
- Bug fix for INS and AHRS filters
- AP/FBW separation using spi or uart
- Sensors fix and addition (GPS, current, baro)
Paparazzi 4.1.1_testing
=======================
Second release candidate for next stable release.
- Run AP and FBW on separate boards
[#297] (https://github.com/paparazzi/paparazzi/pull/297)
- Separate Board Files for yapa_v2.0
[#303] (https://github.com/paparazzi/paparazzi/pull/303)
- Add UART hardware flow control (for STM32 only)
[#289] (https://github.com/paparazzi/paparazzi/pull/289)
- Add ezosd current sensor module
[#292] (https://github.com/paparazzi/paparazzi/pull/292)
- Paparazzi Center: fix coloration by passing input buffer line by line, set language to english
- Rate limiter bugfix
- DC_SHOT message photo numbers shown in GCS
- home mode height can be set different from security height
- Ahrs float_dcm uses magnetic heading while not inflight for better initial guess
[#299] (https://github.com/paparazzi/paparazzi/pull/299)
- Outback Challenge "Safety" Rules 1 and 2
- Added WMM2010 Geo model used in ahrs int_cmpl_quat for rotorcrafts
[#288] (https://github.com/paparazzi/paparazzi/pull/288)
- Fix missing gain definitions from airframe file in total energy control
- Added stm32loader to sw/tools
- Change vsupply to be a uint16 to enable reporting of voltages higher than 25.5V
[#294] (https://github.com/paparazzi/paparazzi/issues/294)
- Digital cam module: release camera button on init
- Fix second order term in propagation of x-position in HFF
Paparazzi 4.1.0_testing
=======================
First release candidate for next stable release.
- Total energy control
[#251] (https://github.com/paparazzi/paparazzi/pull/251)
- PPM input on UART1 RX for Lisa/M autopilots
- Rate Limiter for Flaps, Gears and servo hatches
[#252] (https://github.com/paparazzi/paparazzi/pull/252)
- GPS acceleration compensation in ahrs_float_dcm
[#255] (https://github.com/paparazzi/paparazzi/pull/255)
- Improved gravity heuristic for int_cmpl_quat
- Some updates on digital_cam and photogrammetry modules
[#250] (https://github.com/paparazzi/paparazzi/pull/250)
- Replace wget by OCaml Http_client from netclient lib to download files
[#276] (https://github.com/paparazzi/paparazzi/pull/276)
Paparazzi 4.0.4
===============
Maintenance release
- fix google map version parsing for new maps site using https
- minor fix for hff
- use GPS_TRIGGERED_FUNCTION for ins_chimu_spi
Paparazzi 4.0.3
===============
Maintenance release
- fix google map version download
- fix BMP scripts for stm32
- fix lisa/m 2.0 default voltage
- fix gpsd2ivy for libgps3.5
- improve some makefiles
Paparazzi 4.0.2
===============
Maintenance release
- fix some illegal xml chars in xml description for xtend_rssi and pwm_meas modules
- fix ins_arduimu_basic by adding an empty ahrs_update_gps function
- fix some ivy includes on OSX for weird installation cases
- fix ACTUATORS_PWM_NB for fixedwings with USE_SERVOS_7AND8
- updated kestrel weather meter agent
- fix uart_tunnel if leds are not available on some boards
- fix GPS_LLA message
- fix make failure when trying to get google maps version, but no internet connection
[#187] (https://github.com/paparazzi/paparazzi/issues/187)
Paparazzi 4.0.1
===============
Maintenance release
- Serious fix for settings:
- Handler was not called if module was not specfied as well.
Now an error is generated with info on which file to fix.
- Settings for adaptive fw stabilization fixed.
- Fixes for photogrammetry module.
- Fixes for digital_cam modules.
- Tool added: mergelogs
Paparazzi 4.0
=============
Changes since old_master tag
General
-------
- Settings for the telemetry modes are automatically generated from the XML file
[#118] (https://github.com/paparazzi/paparazzi/pull/118)
- Documentation node for modules
[#182] (https://github.com/paparazzi/paparazzi/pull/182)
- Automatic conversion of units in airframe file, settings and messages.
See http://paparazzi.enac.fr/wiki/Units
- Fix rc_settings: this enables you to change some settings in flight
directly from the RC, is useful if you are alone or don't have a GCS.
- Prefer compiler found in PATH over /opt/paparazzi/arm-multilib
[#231] (https://github.com/paparazzi/paparazzi/issues/231)
- Usability improvements for calibration scripts and
added 3D view of magnetometer data with fitted ellipsoid
New hardware support
--------------------
- Support for new autopilot boards
- [Umarim] (http://paparazzi.enac.fr/wiki/Umarim_v10)
- [Umarim Lite] (http://paparazzi.enac.fr/wiki/Umarim_Lite_v2)
- [NavGo] (http://paparazzi.enac.fr/wiki/NavGo_v3)
- [Lisa/M 2.0] (http://paparazzi.enac.fr/wiki/Lisa/M_v20)
- IMU Aspirin 2.1 support
- BlackMagicProbe JTAG support
Airborne
--------
- All control gains are now positive
[#127] (https://github.com/paparazzi/paparazzi/pull/127)
- RC input follows sign conventions
[#124] (https://github.com/paparazzi/paparazzi/issues/124)
- A modification of the transport layer (pprz and xbee)
in order to allow to select the device at the message level.
- New modules:
- xtend_rssi
[#88] (https://github.com/paparazzi/paparazzi/pull/88)
- open_log
[#82] (https://github.com/paparazzi/paparazzi/pull/82)
- Subsystem for new ahrs estimation algorithms: float_cmpl_rmat
- Improvements for AHRS int_cmpl_quat and float_cmpl_rmat
- Correction of centrifugal acceleration
- Proper handling of BODY_TO_IMU rotations
- All status LEDs configurable (with sensible defaults for the boards):
SYS_TIME_LED, AHRS_ALIGNER_LED, BARO_LED, GPS_LED, RADIO_CONTROL_LED
- Possibility to use two 2-way switches for the mode instead of one 3-way switch
- GPS NMEA parser usable for basic position and fix
[#120] (https://github.com/paparazzi/paparazzi/issues/120)
Rotorcraft firmware specific
----------------------------
- Stabilization/supervision commands with standard PPRZ range
[#169] (https://github.com/paparazzi/paparazzi/pull/169)
- Additional motor arming options
[#174] (https://github.com/paparazzi/paparazzi/pull/174)
- Replaced INV_M with NOMINAL_HOVER_THROTTLE (in %)
To use a fixed value instead of the adaptive vertical filter
[#177] (https://github.com/paparazzi/paparazzi/pull/177)
- Some fixes when changing vertical guidance modes
- Same behaviour (gains) for AP_MODE_HOVER and NAV when holding position
[#82] (https://github.com/paparazzi/paparazzi/pull/82)
Fixedwing firmware specific
---------------------------
- Using a gyro (with IR sensors) is done via imu subsystem now as well
Simulator
---------
- JSBSim interface updated for new FGAccelerations class
- FlightGear interface defaults to version 2.6, define FG_2_4 for 2.4
- NPS simulator [#205] (https://github.com/paparazzi/paparazzi/pull/205)
- has it's own nps target (instead of sim)
- fdm type renamed from nps to jsbsim
- waypoint altitude fixed
- Improved ground interaction for JSBSim, can now initialize on ground
[#222] (https://github.com/paparazzi/paparazzi/pull/222)
- Radio control via joystick now uses SDL (so works on OSX as well)
[#232] (https://github.com/paparazzi/paparazzi/pull/232)
STM32 architecture
------------------
- Luftboot USB bootloader
- Updated ADC defines for lisa/m
You should now be able to use ADC_1, ADC_2, ADC_3 for the ADCs on the ANALOG1
[#159] (https://github.com/paparazzi/paparazzi/issues/159)
- Enable second spektrum receiver via
```<configure name="USE_SECONDARY_SPEKTRUM_RECEIVER" value="1"/>```
- Enable new I2C driver via
```<configure name="USE_NEW_I2C_DRIVER"/>```
Reference in New Issue View Git Blame Copy Permalink