NoahWe
8511252b9b
* rotwing airframe files v3i-k and conf update repaired rotwing drones v3d an v3e turn calc asml baro to true for all rotwing airframes * remove old magneto calib v3d and v3e * v3e flown in VB * update imu filter v3i and v3j turn off highspeed logging imu calib all accelero on v3j add all 3 imu filters v3j * v3d all imu calibrations v3d magneto calib * turn off pfc debug, rotwing put air_data defines in common airframe file * add magneto rotation for i,j,d * merge with master * rotwing airframe files v3i-k and conf update repaired rotwing drones v3d an v3e turn calc asml baro to true for all rotwing airframes * try cube imu 1 on v3d * pull some things from v3b * small change in rotwing liftd eff scheduling * re-do v3j magneto calibration * v3e magneto rotation * fix consistency of defines * revert changes eff scheduling * make compatible with rebase
MAIN README
Paparazzi UAS
Paparazzi is a free open source software package for Unmanned (Air) Vehicle Systems. For many years, the system has been used successfuly by hobbyists, universities and companies all over the world, on vehicles of various sizes (11.9g to 25kg). Paparazzi supports fixed wing, rotorcraft, hybrids, flapping vehicles and it is even possible to use it for boats and surface vehicles.
Documentation is available here https://paparazzi-uav.readthedocs.io/en/latest/
More docs is also available on the wiki http://wiki.paparazziuav.org
To get in touch, subscribe to the mailing list [paparazzi-devel@nongnu.org] (http://savannah.nongnu.org/mail/?group=paparazzi), the IRC channel (freenode, #paparazzi) and Gitter (https://gitter.im/paparazzi/discuss).
Required software
Instructions for installation can be found on the wiki (http://wiki.paparazziuav.org/wiki/Installation).
Quick start:
git clone https://github.com/paparazzi/paparazzi.git
cd ./paparazzi
./install.sh
For Ubuntu users, required packages are available in the [paparazzi-uav PPA] (https://launchpad.net/~paparazzi-uav/+archive/ppa), Debian users can use the [OpenSUSE Build Service repository] (http://download.opensuse.org/repositories/home:/flixr:/paparazzi-uav/Debian_7.0/)
Debian/Ubuntu packages:
- paparazzi-dev is the meta-package on which the Paparazzi software depends to compile and run the ground segment and simulator.
- paparazzi-jsbsim is needed for using JSBSim as flight dynamics model for the simulator.
Recommended cross compiling toolchain: https://launchpad.net/gcc-arm-embedded
Directories quick and dirty description:
conf: the configuration directory (airframe, radio, ... descriptions).
data: where to put read-only data (e.g. maps, terrain elevation files, icons)
doc: documentation (diagrams, manual source files, ...)
sw: software (onboard, ground station, simulation, ...)
var: products of compilation, cache for the map tiles, ...
Compilation and demo simulation
-
type "make" in the top directory to compile all the libraries and tools.
-
"./paparazzi" to run the Paparazzi Center
-
Select the "Bixler" aircraft in the upper-left A/C combo box. Select "sim" from upper-middle "target" combo box. Click "Build". When the compilation is finished, select "Simulation" in Operation tab and click "Start Session".
-
In the GCS, wait about 10s for the aircraft to be in the "Holding point" navigation block. Switch to the "Takeoff" block (lower-left blue airway button in the strip). Takeoff with the green launch button.
Uploading the embedded software
-
Power the flight controller board while it is connected to the PC with the USB cable.
-
From the Paparazzi center, select the "ap" target, and click "Upload".
Flight
- From the Paparazzi Center, select the flight session and ... do the same as in simulation !