mirror of
https://github.com/paparazzi/paparazzi.git
synced 2026-06-06 16:58:48 +08:00
Modified Files:
hw/in_progress/adxrs300_breakout.brd hw/in_progress/boozrotor_v1.2.brd hw/in_progress/boozrotor_v1.2.sch Added Files: sw/airborne/arm-linux/arm-linux_bootlog.txt Bootmessage Phytec lpc3180 dev Board sw/airborne/arm9/include/lpc318x.h * LPC318X.h: Header file for Philips LPC318x Family Microprocessors * The header file is the super set of all hardware definition of the * peripherals for the LPC318x family microprocessor. * Copyright(C) 2006, Philips Semiconductor * All rights reserved. * History * 2005.10.01 ver 1.00 Prelimnary version, first Release
This commit is contained in:
Andreas Kleinert
@@ -0,0 +1,232 @@
|
||||
My RootFS v0.1+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||||
|
||||
U-Boot 1.1.1 (Dec 21 2006 - 10:07:00)
|
||||
|
||||
U-Boot code: 81EC0000 -> 81EE7F5C BSS: -> 81EE97B4
|
||||
SDRAM : 32M detected
|
||||
RAM Configuration:
|
||||
Bank #0: 80000000 31 MB
|
||||
Bank #1: 00000000 0 kB
|
||||
Flash: 0 kB
|
||||
NAND:NAND device: Manufacturer ID: 0x20, Chip ID: 0x35 (ST Micro NAND 32MiB 1,8V 8-bit)
|
||||
Scanning device for bad blocks
|
||||
Bad eraseblock 218 at 0x00368000
|
||||
Bad eraseblock 882 at 0x00dc8000
|
||||
Using default environment
|
||||
|
||||
In: serial
|
||||
Out: serial
|
||||
Err: serial
|
||||
Hit any key to stop autoboot: 0
|
||||
Boot reached stage 1
|
||||
## Booting image at 80600000 ...
|
||||
Boot reached stage 2
|
||||
Boot reached stage 3
|
||||
Image Name: Linux-2.6.10
|
||||
Image Type: ARM Linux Kernel Image (uncompressed)
|
||||
Data Size: 887972 Bytes = 867.2 kB
|
||||
Load Address: 80008000
|
||||
Entry Point: 80008000
|
||||
Boot reached stage 4
|
||||
Boot reached stage 5
|
||||
Boot reached stage 6
|
||||
OK
|
||||
Boot reached stage 7
|
||||
Boot reached stage 8
|
||||
Boot reached stage 14
|
||||
Boot reached stage 15
|
||||
|
||||
Starting kernel ...
|
||||
|
||||
Uncompressing Linux........................................................... done, booting the kernel.
|
||||
Linux version 2.6.10 (root@localhost.localdomain) (gcc version 3.4.0 20040409 (CodeSourcery ARM Q1 2004)) #1 Thu Dec 21 10:23:48 CST 2006
|
||||
CPU: ARM926EJ-Sid(wt)RR [41069264] revision 4 (ARMv5TEJ)
|
||||
CPU: D VIVT write-back cache
|
||||
CPU: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
|
||||
CPU: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
|
||||
Machine: LPC3180
|
||||
serial : early init
|
||||
Memory policy: ECC disabled, Data cache writethrough
|
||||
Built 1 zonelists
|
||||
Kernel command line: console=ttyS0,115200n8 root=/dev/ram initrd=0x80800000,12M
|
||||
Interrupt masks are setup
|
||||
PID hash table entries: 128 (order: 7, 2048 bytes)
|
||||
Console: colour dummy device 80x30
|
||||
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
|
||||
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
|
||||
Memory: 31MB = 31MB total
|
||||
Memory: 17280KB available (1450K code, 299K data, 88K init)
|
||||
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
|
||||
CPU: Testing write buffer coherency: ok
|
||||
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
|
||||
Freeing initrd memory: 12288K
|
||||
NET: Registered protocol family 16
|
||||
late serial init
|
||||
serial : late init
|
||||
SD/MMC card sense IRQ=91
|
||||
start_module_gpio:601: LPC3180 GPIO driver
|
||||
start_module_gpio:602: Debug Level 0
|
||||
start_module_gpio:589: GPIO Userspace driver
|
||||
start_module_gpio:590: Debug Level 0
|
||||
SCSI subsystem initialized
|
||||
usbcore: registered new driver usbfs
|
||||
usbcore: registered new driver hub
|
||||
LPC3180 I2C-0: Master at 0xc0199780, irq 51.
|
||||
USB I2C-0: Master at 0xc0199980, irq 63.
|
||||
NetWinder Floating Point Emulator V0.97 (double precision)
|
||||
Serial: 8250/16550 driver $Revision$ 4 ports, IRQ sharing disabled
|
||||
ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
|
||||
ttyS1 at MMIO 0x0 (irq = 7) is a IP3106
|
||||
ttyS2 at MMIO 0x0 (irq = 8) is a IP3106
|
||||
ttyS3 at MMIO 0x0 (irq = 10) is a IP3106
|
||||
io scheduler noop registered
|
||||
io scheduler anticipatory registered
|
||||
io scheduler deadline registered
|
||||
io scheduler cfq registered
|
||||
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
|
||||
loop: loaded (max 8 devices)
|
||||
elevator: using anticipatory as default io scheduler
|
||||
nbd: registered device at major 43
|
||||
mice: PS/2 mouse device common for all mice
|
||||
i2c /dev entries driver
|
||||
Obelix: Driver for nxpp platform only
|
||||
|
||||
NET: Registered protocol family 2
|
||||
IP: routing cache hash table of 512 buckets, 4Kbytes
|
||||
TCP: Hash tables configured (established 2048 bind 4096)
|
||||
NET: Registered protocol family 1
|
||||
NET: Registered protocol family 17
|
||||
VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 1
|
||||
RAMDISK: Compressed image found at block 0
|
||||
VFS: Mounted root (ext2 filesystem).
|
||||
Freeing init memory: 88K
|
||||
INIT: version 2.85 booting
|
||||
dma-core : dma core init
|
||||
ARM PLL080 DMA Controller: Address = 31000000, irq = 28
|
||||
DMA Controller setup: 16 requestors,
|
||||
32-bit wide bus,
|
||||
2 master interfaces,
|
||||
8 channels
|
||||
lpc3180_kbd: Requesting IO Region: 40050000 - 0080
|
||||
|
||||
lpc3180_kbd: Memory mapped to c2006000
|
||||
|
||||
lpc3180_kbd: creating proc entry
|
||||
|
||||
keyboard-lpc3180: driver running on platform=lpc3180
|
||||
lpc3180_kbd: Setting up registers
|
||||
|
||||
lpc3180_kbd: initialising driver
|
||||
|
||||
lpc3180_kbd: registering device
|
||||
|
||||
lpc3180_kbd: lpc3180 keyboard open called
|
||||
|
||||
sysfs entry reg
|
||||
lpc3180_kbd: LPC3180 keyboard driver initialized
|
||||
|
||||
LPC3180 Event Router driver
|
||||
Debug Level 1
|
||||
Requesting IO Region: 4000C000 - 0018
|
||||
Memory mapped to c2008000
|
||||
Requesting IO Region: 40010000 - 0018
|
||||
Memory mapped to c200a000
|
||||
Requesting IO Region: 40008000 - 0018
|
||||
MIC Memory mapped to c200c000
|
||||
gpio_leds : driver compiled Dec 21 2006 at 10:21:21
|
||||
Initializing USB Mass Storage driver...
|
||||
usbcore: registered new driver usb-storage
|
||||
USB Mass Storage support registered.
|
||||
usbcore: registered new driver usbhid
|
||||
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
|
||||
About to register ohci_hcd_lpc3180_driver
|
||||
About to register ip3506_ohci
|
||||
ohci ohci1: at 0xf1020000, irq 59
|
||||
init_otg_dualrole_fsm
|
||||
usbcore: registered new driver catc
|
||||
drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
|
||||
usbcore: registered new driver kaweth
|
||||
drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
|
||||
usbcore: registered new driver rtl8150
|
||||
usbcore: registered new driver usbnet
|
||||
drivers/usb/net/pegasus.c: v0.5.12 (2003/06/06):Pegasus/Pegasus II USB Ethernet driver
|
||||
usbcore: registered new driver pegasus
|
||||
spi-lpc3180: SPI Test Dec 21 2006 CS driver running on platform=premo
|
||||
Found clock frequency for spi-1 is 104000000
|
||||
initialising CS table
|
||||
Found clock frequency for spi-2 is 104000000
|
||||
initialising CS table
|
||||
isp1301_generic 1-002d: chiprev 2.10, driver 26 May 2006
|
||||
pshs_uart probe: Using 7 dma req for TX and 8 dma req for RX
|
||||
ttyPSHS0 at MMIO 0x40018000 (irq = 25) is a PSHS
|
||||
pshs_uart probe: Using 9 dma req for TX and 10 dma req for RX
|
||||
ttyPSHS1 at MMIO 0x4001c000 (irq = 25) is a PSHS
|
||||
pshs_uart probe: Using 5 dma req for TX and 6 dma req for RX
|
||||
ttyPSHS2 at MMIO 0x40014000 (irq = 25) is a PSHS
|
||||
usbcore: registered new driver usbserial
|
||||
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
|
||||
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI SIO
|
||||
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI 8U232AM Compatible
|
||||
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT232BM Compatible
|
||||
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT2232C Compatible
|
||||
drivers/usb/serial/usb-serial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver
|
||||
drivers/usb/serial/usb-serial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver
|
||||
usbcore: registered new driver ftdi_sio
|
||||
drivers/usb/serial/ftdi_sio.c: v1.4.1:USB FTDI Serial Converters Driver
|
||||
drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303
|
||||
usbcore: registered new driver pl2303
|
||||
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.12
|
||||
usb_register_udc returned 0
|
||||
USB probe done
|
||||
gs_module_init: Gadget Serial v2.0 loaded
|
||||
ip3506: start_otg_ip3506
|
||||
|
||||
ip3506: ip3506_otg_probe
|
||||
|
||||
data->container = c0229244
|
||||
host = 1
|
||||
a_bus_req = 1
|
||||
gadget = 1
|
||||
id = 1
|
||||
ip3503_udc_notification: reason 0
|
||||
spi_init
|
||||
SPI : setting spi-1 control to 804E93
|
||||
Adapter c1b36078 Adapter spi-1 process c057faa0
|
||||
spi-lpc : Adapter spi-1 registered at 20088000 using irq 55
|
||||
SPI : setting spi-2 control to 804E93
|
||||
Adapter c168cce0 Adapter spi-2 process c057f820
|
||||
spi-lpc : Adapter spi-2 registered at 20090000 using irq 44
|
||||
spi-lpc : Driver version 1.5 registered
|
||||
setting divider code to 18 (ratio=38) using base clock = 104000000 freq out 2736842
|
||||
spi_readtest_init
|
||||
done spi_readtest_init
|
||||
NAND device: Manufacturer ID: 0x20, Chip ID: 0x35 (ST Micro NAND 32MiB 1,8V 8-bit)
|
||||
Scanning device for bad blocks
|
||||
Bad eraseblock 218 at 0x00368000
|
||||
Bad eraseblock 882 at 0x00dc8000
|
||||
Creating 1 MTD partitions on "NAND 32MiB 1,8V 8-bit":
|
||||
0x01000000-0x01f00000 : "LPC3180 NAND PART 0"
|
||||
CSLIP: code copyright 1989 Regents of the University of California
|
||||
PPP generic driver version 2.4.2
|
||||
PPP Deflate Compression module registered
|
||||
PPP BSD Compression module registered
|
||||
mmc-lpc3180: mmc/sd driver running on platform=lpc3180
|
||||
: MMCI rev 0 cfg 00 at 0x20098000 irq 15,13
|
||||
: host does not support reading read-only switch. assuming write-enable.
|
||||
mmcblk0: :e624 SD01G 992000KiB
|
||||
mmcblk0: p1
|
||||
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
|
||||
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
|
||||
running on [console=ttyS0,115200n8 root=/dev/ram initrd=0x80800000,12M]
|
||||
Mounting SD/USB storage
|
||||
VFS: Can't find an ext2 filesystem on dev mmcblk0p1.
|
||||
/dev/mmcblk0p1 on /mnt/mmc type vfat (rw)
|
||||
SD card mounted successfully
|
||||
No USB storage or unknown filesystem
|
||||
INIT: Entering runlevel: 2
|
||||
Creating the the /var/dev/ttySA* links
|
||||
Starting internet superserver: inetd.
|
||||
|
||||
Copacabana - ARM Embedded Linux version 1.1-vfp
|
||||
Monday 20 December 2004 @ 20:40
|
||||
(none) login:
|
||||
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user