nuttx

analog

…

audio

include/nuttx/audio: Remove CONFIG_SCHED_WORKQUEUE check in pcm.h

2017-11-23 19:59:07 +09:00

binfmt

Documentation and comments updated to further enshrine exec() as an official NuttX interface.

2017-10-03 07:52:05 -06:00

can

…

contactless

…

crypto

…

drivers

…

eeprom

…

fs

Squashed commit of the following:

2018-01-03 16:03:56 -06:00

i2c

…

input

drivers/ft5x06: Add a polled mode of operation for the FT5x06 in attempt to work around the fact that the LPCXpresso-LPC54628 chose a non-interrupt pin for the FT5x06 interrupt. Driver is still not yet functional.

2017-12-18 08:58:07 -06:00

ioexpander

configs/stm32f103-minimum: Remove nonsensical #error.

2018-01-09 11:17:01 -06:00

lcd

drivers/lcd/max7219.c: Add support to MAX7219 LED Matrix as LCD interface

2017-11-04 07:54:48 -06:00

leds

…

lib

…

mm

mm: Add a debug assertin to check for integer overflow in malloc.

2017-11-21 07:24:10 -06:00

modem

…

mtd

drivers/mtd: Add a driver for Macronix MX35LFxGE4AB serial NAND flash.

2017-11-29 07:15:36 -06:00

net

arch/arm/src/lpc54xx: Add register level debug output for Ethernet testing. Fixed a few start up problems. Still hangs on start-up, however.

2017-12-31 11:11:57 -06:00

nx

Kconfigs: Add CONFIG_LCD_UPDATE that works like CONFIG_NX_UPDATE but can be enabled without enabling the graphics subsystem.

2017-11-04 14:08:21 -06:00

power

drivers/power/bq2429x.c: Add trickle charging mode

2017-12-18 06:38:41 -06:00

sensors

drivers/sensors/apds9960.c: Use work_queue to read/process data when receive an IRQ

2017-10-20 08:54:44 -06:00

serial

…

spi

…

syslog

…

timers

Cosmetic fixes to comments, README, and other trivial corrections.

2017-12-25 10:45:47 -06:00

usb

drivers/usbdev: Add RNDIS-over-USB driver

2017-09-24 07:24:34 -06:00

video

Framebuffer Driver: Small modification convention for multi-planar displays (of which there are none).

2017-11-29 07:06:53 -06:00

wireless

Merged in antmerlino/nuttx/mac802154dev-header-offset (pull request #538 )

2017-11-22 18:22:35 +00:00

.gitignore

…

addrenv.h

…

arch.h

…

ascii.h

…

board.h

XMC4 Serial: The Alternative Receive Interrupt was not being configured.

2017-11-25 12:21:33 -06:00

cancelpt.h

task: Add new cancellation point interface, check_cancellation_point().

2017-10-09 09:43:04 -06:00

clock.h

procfs: Fix uptime being close to maximum 32-bit value in certain config

2017-11-10 09:01:39 -06:00

compiler.h

compiler.h: Fix some GCC warnings introduced for SDCC support. Basically a naming collision.

2017-10-02 07:09:31 -06:00

init.h

…

irq.h

sched/irq: Add a configuration option to show interrupt information via a procfs file.

2018-01-12 18:26:46 -06:00

kmalloc.h

profcs: At file to should user space heap. This replaces the NSH free command.

2017-11-13 12:51:33 -06:00

kthread.h

kthread_create(): Rename kernel_thread() to kthread_create() for better naming consistency with task_create() and kthread_delete().

2017-10-16 11:38:00 -06:00

mmcsd.h

…

module.h

…

mqueue.h

mqueue.h edited online with Bitbucket

2017-10-11 02:49:20 +00:00

page.h

…

pgalloc.h

mm/mm_gran: Add a function to get information about the state of the granuale allocator.

2017-11-14 14:41:03 -06:00

poff.h

…

progmem.h

fs/procfs/fs_procfsprogrem: Add /proc/progmem. This is an alternative way to get the information that was previoulsy available in apps/system/free. apps/system/free was removed beause it made illegal calls into the OS violating the portable interface. This new procfs entry provides the same information with no such violation.

2017-11-13 09:08:39 -06:00

pthread.h

…

random.h

…

sched_note.h

…

sched.h

sched: move POSIX thread specific data from pthread TCB to common TCB structure. This change allows using pthread_getspecific/pthread_setspecific from main thread. Patch also enables using pthread data with config option CONFIG_DISABLE_PTHREAD=y.

2017-10-25 07:06:42 -06:00

scsi.h

…

sdio.h

arch/arm/src/lkpc54xx: In SDMMC driver, fix an error which was clobbering the interrupt mask register (xfrmask). Also, add a kludge for the missing DTO interrupt.

2017-12-20 18:39:10 -06:00

semaphore.h

libc and libnx: When the libraries are built into two libraries, a user space library and a OS space library (as in the PROTECTED and KERNEL build). Then the user space library must not use the OS internal interfaces; similarly, the OS must avoid using the userspace interfaces so that it does not muck the errno value or create spurious cancellation points.

2017-10-08 12:14:18 -06:00

signal.h

libc and libnx: When the libraries are built into two libraries, a user space library and a OS space library (as in the PROTECTED and KERNEL build). Then the user space library must not use the OS internal interfaces; similarly, the OS must avoid using the userspace interfaces so that it does not muck the errno value or create spurious cancellation points.

2017-10-08 12:14:18 -06:00

spawn.h

…

spinlock.h

…

streams.h

…

symtab.h

…

time.h

…

tls.h

…

tree.h

…

userspace.h

…

vt100.h

…

wdog.h

…

wqueue.h

…

zoneinfo.h

…