Updated for 0.2.4 release

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@192 42af7a65-404d-4744-a932-0658087f49c3

ChangeLog

@@ -111,6 +111,16 @@
 	  pthread_join.  In the failure condition, memory was being
 	  deallocated while still in use.
 
-0.2.4 2007-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
+0.2.4 2007-04-28 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Verfied c5471 build under Cygwin on WinXP
+	* Makesystem changes to better support different SoCs.
+	* Made arch/c5471/include and arch/dm320/include identical in
+	  preparation for merging into arch/arm
+	* Logic from arch/c5471 and arch/dm320 combined into arch/arm.
+	  arch/c5471 and arch/dm320 are deprecated and will be removed
+	  when the new c5471 and dm320 logic is verified.
+
+0.2.5 2007-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
 
 	* Started m68322

Documentation/NuttX.html

@@ -180,7 +180,7 @@
 </table>
 
 <p>
-   The sixth release of NuttX (nuttx-0.2.3) is available for download
+   The seventh release of NuttX (nuttx-0.2.4) is available for download
    from the <a href="http://sourceforge.net/project/showfiles.php?group_id=189573">SourceForge</a>
    website.
 </p>
@@ -472,7 +472,17 @@ Other memory:
 	  pthread_join.  In the failure condition, memory was being
 	  deallocated while still in use.
 
-0.2.4 2007-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
+0.2.4 2007-04-28 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* Verfied c5471 build under Cygwin on WinXP
+	* Makesystem changes to better support different SoCs.
+	* Made arch/c5471/include and arch/dm320/include identical in
+	  preparation for merging into arch/arm
+	* Logic from arch/c5471 and arch/dm320 combined into arch/arm.
+	  arch/c5471 and arch/dm320 are deprecated and will be removed
+	  when the new c5471 and dm320 logic is verified.
+
+0.2.5 2007-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
 
 	* Started m68322
 </pre></ul>

Documentation/NuttxPortingGuide.html

@@ -16,7 +16,7 @@
   </b></big>
   <p><small>by</small></p>
   <p>Gregory Nutt</p>
-  <p><small>Last Update: March 26, 2007</small></p>
+  <p><small>Last Update: April 30, 2007</small></p>
 </center>
 
 <center><h1>Table of Contents</h1></center>
@@ -325,24 +325,75 @@
 </ul>
 
 <h3><a name="supportedarchitectures">2.2.3 Supported Architectures</a></h3>
+<p>
+   <b>Archictecture- and Chip-Specific Directories</b>.
+   All processor architecture-specific directories are maintained in sub-directories of
+   the <code>arch/</code> directory.
+   Different chips or SoC's may implement the same processor core.
+   Chip-specific logic can be found in sub-directories under the architecture
+   directory.
+   Current architecture/chip directories are summarized below:
+</p>
 <ul>
   <li><code>arch/sim</code>:
     A user-mode port of NuttX to the x86 Linux platform is available.
     The purpose of this port is primarily to support OS feature developement.
     This port does not support interrupts or a real timer (and hence no
     round robin scheduler)  Otherwise, it is complete.
-  <li><code>arch/c5471</code>:
-    TI TMS320C5471 (also called TMS320DM180 or just C5471).
-    NuttX operates on the ARM7 of this dual core processor.
-    This port is complete, verified, and included in the NuttX release 0.1.1.
-  <li><code>arch/dm320</code>:
-      TI TMS320DM320 (also called just DM320).
-      NuttX operates on the ARM9EJS of this dual core processor.
-      This port complete, verified, and included in the NuttX release 0.2.1.
+  </li>
+
+  <li><code>arch/arm</code>:
+    This directory holds common ARM architectures.  At present, this includes
+    the following subdirectories:
+    <ul>
+      <li><code>arch/arm/include</code> and <code>arch/arm/common</code>:
+          Common ARM logic.
+      </li>
+
+      <li><code>arch/arm/include/c5471</code> and <code>arch/arm/src/c5471</code>:
+        TI TMS320C5471 (also called TMS320DM180 or just C5471).
+        NuttX operates on the ARM7 of this dual core processor.
+        This port is complete, verified, and included in the NuttX release 0.1.1.
+      </li>
+
+      <li><code>arch/arm/include/dm320</code> and <code>arch/arm/src/dm320</code>:
+        TI TMS320DM320 (also called just DM320).
+        NuttX operates on the ARM9EJS of this dual core processor.
+        This port complete, verified, and included in the NuttX release 0.2.1.
+      </li>
+    </ul>
+  </li>
+
+  <li><code>configs/mcu123-lpc214x</code>:
+    The mcu123.com lpc214x development board.
+    This is a work in progress.
+  </li>
+
   <li><code>arch/m68322</code>
-      A work in progress.</li>
+    A work in progress.</li>
+  </li>
+
   <li><code>arch/pjrc-8051</code>:
     8051 Microcontroller.  This port is not quite ready for prime time.</li>
+  </li>
+</ul>
+
+<p>
+  <b>Deprecated Architecture Directories</b>.
+  The following architecture directories are deprecated.  They have been
+  replaced by the logic in <code>arm/arm</code> and will deleted when
+  <code>arch/arm</code> is fully verified.
+</p>
+<ul>
+  <li><code>arch/c5471</code>:
+    Replaced with <code>arch/arm/include/c5471</code> and
+    <code>arch/arm/src/c5471<code>.
+  </li>
+
+  <li><code>arch/dm320</code>:
+    Replaced with <code>arch/arm/include/dm320</code> and
+    <code>arch/arm/src/dm320<code>.
+  </li>
 </ul>
 <p>
   Other ports for the for the TI TMS320DM270 and for MIPS are in various states
@@ -463,6 +514,10 @@
     with a GNU arm-elf toolchain*. This port is complete, verified, and
     included in the NuttX release.</li>
 
+  <li><code>configs/mcu123-lpc214x</code>:
+    This is a port to the mcu123.com lpc214x development board.
+    This OS is also built with the arm-elf toolchain*.</li>
+
   <li><code>configs/ntosd-dm320</code>:
     This port uses the Neuros OSD with a GNU arm-elf toolchain*.
     See <a href="http://wiki.neurostechnology.com/index.php/Developer_Welcome">Neuros Wiki</a>
@@ -1033,10 +1088,36 @@ The system can be re-made subsequently by just typing <code>make</code>.
 </p>
 
 <h2>Architecture selection</h2>
-
+<p>
+  The following configuration itemes select the architecture, chip, and
+  board configuration for the build.
+</p>
 <ul>
-  <li><code>CONFIG_ARCH</code>: identifies the arch subdirectory
-  <li><code>CONFIG_ARCH_name</code>: for use in C code
+  <li><code>CONFIG_ARCH</code>:
+    Identifies the arch subdirectory</li>
+  <li><code>CONFIG_ARCH_name</code>:
+    For use in C code</li>
+  <li><code>CONFIG_ARCH_CHIP</code>:
+    Identifies the arch/*/chip subdirectory</li>
+  <li><code>CONFIG_ARCH_CHIP_name</code>:
+    For use in C code</li>
+  <li><code>CONFIG_ARCH_BOARD</code>:
+     Identifies the configs subdirectory and hence, the board that supports
+     the particular chip or SoC.</li>
+  <li><code>CONFIG_ARCH_BOARD_name</code>:
+     For use in C code</li>
+</ul>
+
+<p>
+  Some architectures require a description of the the RAM configuration:
+</p>
+<ul>
+  <li><code>CONFIG_DRAM_SIZE</code>:
+    Describes the installed DRAM.</li>
+  <li><code>CONFIG_DRAM_START</code>:
+    The start address of DRAM (physical)</li>
+  <li><code>CONFIG_DRAM_VSTART</code>:
+    The startaddress of DRAM (virtual)</li>
 </ul>
 
 <h2>General OS setup</h2>

Makefile

@@ -40,7 +40,7 @@ TOPDIR		= ${shell pwd}
 ARCH_DIR	= arch/$(CONFIG_ARCH)
 ARCH_SRC	= $(ARCH_DIR)/src
 ARCH_INC	= $(ARCH_DIR)/include
-BOARD_DIR	= configs/$(CONFIG_BOARD)
+BOARD_DIR	= configs/$(CONFIG_ARCH_BOARD)
 
 SUBDIRS		= sched lib $(ARCH_SRC) mm fs drivers examples/$(CONFIG_EXAMPLE)
 
@@ -53,12 +53,15 @@ BIN		= nuttx$(EXEEXT)
 all: $(BIN)
 .PHONY: clean context clean_context distclean
 
+# Build the mkconfig tool used to create include/nuttx/config.h
 tools/mkconfig:
 	$(MAKE) -C tools -f Makefile.mkconfig TOPDIR=$(TOPDIR)  mkconfig
 
+# Create the include/nuttx/config.h file
 include/nuttx/config.h: $(TOPDIR)/.config tools/mkconfig
 	tools/mkconfig $(TOPDIR) > include/nuttx/config.h
 
+# link the arch/<arch-name>/include dir to include/arch
 include/arch: Make.defs
 	@if [ -e include/arch ]; then \
 		if [ -h include/arch ]; then \
@@ -70,6 +73,7 @@ include/arch: Make.defs
 	fi
 	@ln -s $(TOPDIR)/$(ARCH_DIR)/include include/arch
 
+# Link the configs/<board-name>/include dir to include/arch/board
 include/arch/board: Make.defs include/arch
 	@if [ -e include/arch/board ]; then \
 		if [ -h include/arch/board ]; then \
@@ -81,21 +85,57 @@ include/arch/board: Make.defs include/arch
 	fi
 	@ln -s $(TOPDIR)/$(BOARD_DIR)/include include/arch/board
 
+# Link the configs/<board-name>/src dir to arch/<arch-name>/src/board
 $(ARCH_SRC)/board: Make.defs
-	@if [ -e $(ARCH_SRC)/board ]; then \
-		if [ -h $(ARCH_SRC)/board ]; then \
-			rm -f $(ARCH_SRC)/board ; \
-		else \
+	@if [ -h $(ARCH_SRC)/board ]; then \
+		rm -f $(ARCH_SRC)/board ; \
+	else \
+		if [ -e $(ARCH_SRC)/board ]; then \
 			echo "$(ARCH_SRC)/board exists but is not a symbolic link" ; \
 			exit 1 ; \
 		fi ; \
 	fi
 	@ln -s $(TOPDIR)/$(BOARD_DIR)/src $(ARCH_SRC)/board
 
-context: check_context include/nuttx/config.h include/arch include/arch/board $(ARCH_SRC)/board
+# Link arch/<arch-name>/include/<chip-name> to arch/<arch-name>/include/chip
+$(ARCH_SRC)/chip: Make.defs
+ifneq ($(CONFIG_ARCH_CHIP),)
+	@if [ -h $(ARCH_SRC)/chip ]; then \
+		rm -f $(ARCH_SRC)/chip ; \
+	else \
+		if [ -e $(ARCH_SRC)/chip ]; then \
+			echo "$(ARCH_SRC)/chip exists but is not a symbolic link" ; \
+			exit 1 ; \
+		fi ; \
+	fi
+	@ln -s $(CONFIG_ARCH_CHIP) $(ARCH_SRC)/chip
+endif
+
+# Link arch/<arch-name>/src/<chip-name> to arch/<arch-name>/src/chip
+$(ARCH_INC)/chip: Make.defs
+ifneq ($(CONFIG_ARCH_CHIP),)
+	@if [ -e $(ARCH_INC)/chip ]; then \
+		if [ -h $(ARCH_INC)/chip ]; then \
+			rm -f $(ARCH_INC)/chip ; \
+		else \
+			echo "$(ARCH_INC)/chip exists but is not a symbolic link" ; \
+			exit 1 ; \
+		fi ; \
+	fi
+	@ln -s $(CONFIG_ARCH_CHIP) $(ARCH_INC)/chip
+endif
+
+dirlinks: include/arch include/arch/board $(ARCH_SRC)/board $(ARCH_SRC)/chip $(ARCH_INC)/chip
+
+context: check_context include/nuttx/config.h dirlinks
 
 clean_context:
-	rm -f include/nuttx/config.h include/arch $(ARCH_INC)/board $(ARCH_SRC)/board
+	@rm -f include/nuttx/config.h include/arch
+	@if [ -h include/arch ]; then rm -f include/arch ; fi
+	@if [ -h $(ARCH_INC)/board ]; then rm -f $(ARCH_INC)/board ; fi
+	@if [ -h $(ARCH_SRC)/board ]; then rm -f $(ARCH_SRC)/board ; fi
+	@if [ -h $(ARCH_INC)/chip ]; then rm -f $(ARCH_INC)/chip ; fi
+	@if [ -h $(ARCH_SRC)/chip ]; then rm -f $(ARCH_SRC)/chip ; fi
 
 check_context:
 	@if [ ! -e ${TOPDIR}/.config -o ! -e ${TOPDIR}/Make.defs ]; then \

ReleaseNotes

@@ -1,18 +1,20 @@
-nuttx-0.2.3
+nuttx-0.2.4
 ^^^^^^^^^^^^
 
-This is the sixth release of NuttX.  This release is primarily
-a bugfix release.  Numerous problems were fixed as detailed
-in the change log.  New functionaliy includes support for
-timed messsage queues.
+This is the 7th release of NuttX.  This release is only to roll out
+build changes to better support different SoC's that use the same
+processor architecture.  In particular, the two existing ARM architectures,
+c5471 and DM320 were combined into a single ARM directory.  This was done
+in preparation for an LPC2148 port that is currently in progress.  There
+is NO new functionality or significant bufixes in this release.
 
 See the ChangeLog for a complete list of changes.
 
 This release has been verified on the Linux user-mode platform
 and the Neuros OSD using the test program under examples/ostest.
 The results of the testing is available in the source tree under
-configs/ntosd-dm320/doc/test-results. There are no known,
-critical defects but the project development status remains at
-'beta' status pending further test and evaluation.
+configs/ntosd-dm320/doc/test-results and under configs/sim/doc/test-results.
+There are no known, critical defects but the project development status
+remains at 'beta' status pending further test and evaluation.
 
-This tarball contains a complete CVS snapshot from March 29, 2007.
+This tarball contains a complete CVS snapshot from April 28, 2007.

TODO

@@ -13,6 +13,7 @@ o Task/Scheduler
    MSEC_PER_TICK in sched/clock_internal.h
 - Consider implementing wait, waitpid, waitid.  At present, a parent has
   no information about child tasks.
+- Several APIs do not set errno.  Need to review all APIs.
 
 o Memory Managment
 - Add an option to free all memory allocated by a task when the task exits.
@@ -24,6 +25,11 @@ o Signals
 o pthreads
 - pthread_cancel():  Should implemenent cancellation points and pthread_testcancel()
 
+o Network
+- Port FreeBSD TCP/IP stack
+
+o USB
+
 o Libraries
 
 o File system
@@ -37,11 +43,10 @@ o Documentation
 
 o Build system
 - Names under arch are incorrect.  These should hold processor architectures.
-  c5471 should be arm7
-  dm320 should be arm9
+  c5471 and dm320 should be arm
   pjrc-8051 should be 805x
 - SoC-specific logic should be in subdirectories under arch/<processor-name>.
-  Eg. arm7/include/c5471 should hold c5471 specific header files
+  Eg. arm/include/c5471 should hold c5471 specific header files
 - configs/pjrc-8051 should be configs/pjrc-87c52
 
 o Applications & Tests

arch/README.txt

@@ -129,15 +129,22 @@ arch/sim
     This port does not support interrupts or a real timer (and hence no
     round robin scheduler)  Otherwise, it is complete.
 
-arch/c5471
-    TI TMS320C5471 (also called TMS320DM180 or just C5471).
-    NuttX operates on the ARM7 of this dual core processor. This port
-    complete, verified, and included in the NuttX release 0.1.1.
+arch/arm
+    This directory holds common ARM architectures.  At present, this includes
+    the following subdirectories:
 
-arch/dm320
-    TI TMS320DM320 (also called just DM320).
-    NuttX operates on the ARM9EJS of this dual core processor.  This port
-    complete, verified, and included in the NuttX release 0.2.1.
+    arch/arm/include and arch/arm/common
+        Common ARM logic.
+
+    arch/arm/include/c5471 and arch/arm/src/c5471
+        TI TMS320C5471 (also called TMS320DM180 or just C5471).
+        NuttX operates on the ARM7 of this dual core processor. This port
+        complete, verified, and included in the NuttX release 0.1.1.
+
+    arch/arm/include/dm320 and arch/arm/src/dm320
+        TI TMS320DM320 (also called just DM320).
+        NuttX operates on the ARM9EJS of this dual core processor.  This port
+        complete, verified, and included in the NuttX release 0.2.1.
 
 arch/m68322
     A work in progress.
@@ -145,6 +152,16 @@ arch/m68322
 arch/pjrc-8051
     8051 Microcontroller.  This port is not quite ready for prime time.
 
+The following architecture directories are deprecated.  They have been
+replaced by the logic in arm/arm and will deleted when arch/arm is fully
+verified.
+
+arch/c5471
+    Replaced with arch/arm/include/c5471 and arch/arm/src/c5471
+
+arch/dm320
+    Replaced with arch/arm/include/dm320 and arch/arm/src/dm320
+
 Other ports for the for the TI TMS320DM270 and for MIPS are in various states
 of progress
 

arch/arm/include/arch.h

@@ -0,0 +1,80 @@
+/************************************************************
+ * arch/arch.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/* This file should never be included directed but, rather,
+ * only indirectly through nuttx/arch.h
+ */
+
+#ifndef __ARCH_ARCH_H
+#define __ARCH_ARCH_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/************************************************************
+ * Inline functions
+ ************************************************************/
+
+/************************************************************
+ * Public Types
+ ************************************************************/
+
+/************************************************************
+ * Public Variables
+ ************************************************************/
+
+/************************************************************
+ * Public Function Prototypes
+ ************************************************************/
+
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ARCH_ARCH_H */
+

arch/arm/include/c5471/irq.h

@@ -0,0 +1,105 @@
+/************************************************************
+ * arch/c5471/irq.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/* This file should never be included directed but, rather,
+ * only indirectly through nuttx/irq.h
+ */
+
+#ifndef __ARCH_C5471_IRQ_H
+#define __ARCH_C5471_IRQ_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* C5471 Interrupts */
+
+#define C5471_IRQ_TIMER0         0
+#define C5471_IRQ_TIMER1         1
+#define C5471_IRQ_TIMER2         2
+#define C5471_IRQ_GPIO0          3
+#define C5471_IRQ_ETHER          4
+#define C5471_IRQ_KBGPIO_0_7     5
+#define C5471_IRQ_UART           6
+#define C5471_IRQ_UART_IRDA      7
+#define C5471_IRQ_KBGPIO_8_15    8
+#define C5471_IRQ_GPIO3          9
+#define C5471_IRQ_GPIO2         10
+#define C5471_IRQ_I2C           11
+#define C5471_IRQ_GPIO1         12
+#define C5471_IRQ_SPI           13
+#define C5471_IRQ_GPIO_4_19     14
+#define C5471_IRQ_API           15
+
+#define C5471_IRQ_WATCHDOG      C5471_IRQ_TIMER0
+#define C5471_IRQ_SYSTIMER      C5471_IRQ_TIMER2
+#define NR_IRQS                 (C5471_IRQ_API+1)
+
+/************************************************************
+ * Public Types
+ ************************************************************/
+
+/************************************************************
+ * Inline functions
+ ************************************************************/
+
+/************************************************************
+ * Public Variables
+ ************************************************************/
+
+/************************************************************
+ * Public Function Prototypes
+ ************************************************************/
+
+#ifndef __ASSEMBLY__
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+#endif /* __ARCH_C5471_IRQ_H */
+

arch/arm/include/dm320/irq.h

@@ -0,0 +1,134 @@
+/************************************************************
+ * arch/dm320/irq.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/* This file should never be included directed but, rather,
+ * only indirectly through nuttx/irq.h
+ */
+
+#ifndef __ARCH_DM320_IRQ_H
+#define __ARCH_DM320_IRQ_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* DM320 Interrupts */
+
+#define DM320_IRQ_TMR0      0 /* IRQ0:  Timer 0 Interrupt */
+#define DM320_IRQ_TMR1      1 /* IRQ1:  Timer 1 Interrupt */
+#define DM320_IRQ_TMR2      2 /* IRQ2:  Timer 2 Interrupt (CCD timer 0) */
+#define DM320_IRQ_TMR3      3 /* IRQ3:  Timer 3 Interrupt (CCD timer 1) */
+#define DM320_IRQ_CCDVD0    4 /* IRQ4:  CCD VD Interrupt #0 */
+#define DM320_IRQ_CCDVD1    5 /* IRQ5:  CCD VD Interrupt #1 */
+#define DM320_IRQ_CCDWEN    6 /* IRQ6:  CCD WEN Interrupt */
+#define DM320_IRQ_VENC      7 /* IRQ7:  Video Encoder Interrupt */
+#define DM320_IRQ_SP0       8 /* IRQ8:  Serial Port 0 Interrupt (with DMA) */
+#define DM320_IRQ_SP1       9 /* IRQ9:  Serial Port 1 Interrupt */
+#define DM320_IRQ_EXTHOST  10 /* IRQ10: External host interrupt */
+#define DM320_IRQ_IMGBUF   11 /* IRQ11: Image Buffer */
+#define DM320_IRQ_UART0    12 /* IRQ12: UART0 Interrupt */
+#define DM320_IRQ_UART1    13 /* IRQ13: UART1 Interrupt */
+#define DM320_IRQ_USB0     14 /* IRQ14: USB 0 Interrupt (DMA) */
+#define DM320_IRQ_USB1     15 /* IRQ15: USB 1 Interrupt (Core) */
+#define DM320_IRQ_VLYNQ    16 /* IRQ16: VLYNQ Interrupt */
+#define DM320_IRQ_MTC0     17 /* IRQ17: Memory Traffic Controller 0 (DMA) */
+#define DM320_IRQ_MTC1     18 /* IRQ18: Memory Traffic Controller 1 (CFC_RDY) */
+#define DM320_IRQ_MMCSD0   19 /* IRQ19: MMC/SD or MS 0 Interrupt */
+#define DM320_IRQ_MMCSD1   20 /* IRQ20: MMC/SD or MS 1 Interrupt */
+#define DM320_IRQ_EXT0     21 /* IRQ21: External Interrupt #0 (GIO0) */
+#define DM320_IRQ_EXT1     22 /* IRQ22: External Interrupt #1 (GIO1) */
+#define DM320_IRQ_EXT2     23 /* IRQ23: External Interrupt #2 (GIO2) */
+#define DM320_IRQ_EXT3     24 /* IRQ24: External Interrupt #3 (GIO3) */
+#define DM320_IRQ_EXT4     25 /* IRQ25: External Interrupt #4 (GIO4) */
+#define DM320_IRQ_EXT5     26 /* IRQ26: External Interrupt #5 (GIO5) */
+#define DM320_IRQ_EXT6     27 /* IRQ27: External Interrupt #6 (GIO6) */
+#define DM320_IRQ_EXT7     28 /* IRQ28: External Interrupt #7 (GIO7) */
+#define DM320_IRQ_EXT8     29 /* IRQ29: External Interrupt #8 (GIO8) */
+#define DM320_IRQ_EXT9     30 /* IRQ30: External Interrupt #9 (GIO9) */
+#define DM320_IRQ_EXT10    31 /* IRQ31: External Interrupt #10 (GIO10) */
+#define DM320_IRQ_EXT11    32 /* IRQ32: External Interrupt #11 (GIO11) */
+#define DM320_IRQ_EXT12    33 /* IRQ33: External Interrupt #12 (GIO12) */
+#define DM320_IRQ_EXT13    34 /* IRQ34: External Interrupt #13 (GIO13) */
+#define DM320_IRQ_EXT14    35 /* IRQ35: External Interrupt #14 (GIO14) */
+#define DM320_IRQ_EXT15    36 /* IRQ36: External Interrupt #15 (GIO15) */
+#define DM320_IRQ_PREV0    37 /* IRQ37: Preview Engine 0 (Preview Over) */
+#define DM320_IRQ_PREV1    38 /* IRQ38: Preview Engine 1 (Preview Historgram Over) */
+#define DM320_IRQ_WDT      39 /* IRQ39: Watchdog Timer Interrupt */
+#define DM320_IRQ_I2C      40 /* IRQ40: I2C Interrupt */
+#define DM320_IRQ_CLKC     41 /* IRQ41: Clock controller Interrupt (wake up) */
+#define DM320_IRQ_E2ICE    42 /* IRQ42: Embedded ICE Interrupt */
+#define DM320_IRQ_ARMCOMRX 43 /* IRQ43: ARMCOMM Receive Interrupt */
+#define DM320_IRQ_ARMCOMTX 44 /* IRQ44: ARMCOMM Transmit Interrupt */
+#define DM320_IRQ_RSV      45 /* IRQ45: Reserved Interrupt */
+
+#define DM320_IRQ_SYSTIMER DM320_IRQ_TMR0
+#define NR_IRQS            (DM320_IRQ_RSV+1)
+
+/************************************************************
+ * Public Types
+ ************************************************************/
+
+/************************************************************
+ * Inline functions
+ ************************************************************/
+
+/************************************************************
+ * Public Variables
+ ************************************************************/
+
+/************************************************************
+ * Public Function Prototypes
+ ************************************************************/
+
+#ifndef __ASSEMBLY__
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+#endif /* __ARCH_DM320_IRQ_H */
+

arch/arm/include/irq.h

@@ -0,0 +1,226 @@
+/************************************************************
+ * arch/irq.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/* This file should never be included directed but, rather,
+ * only indirectly through nuttx/irq.h
+ */
+
+#ifndef __ARCH_IRQ_H
+#define __ARCH_IRQ_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <arch/chip/irq.h>
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* IRQ Stack Frame Format:
+ *
+ * Context is always saved/restored in the same way:
+ *
+ *   (1) stmia rx, {r0-r14}
+ *   (2) then the PC and CPSR
+ *
+ * This results in the following set of indices that
+ * can be used to access individual registers in the
+ * xcp.regs array:
+ */
+
+#define REG_R0              (0)
+#define REG_R1              (1)
+#define REG_R2              (2)
+#define REG_R3              (3)
+#define REG_R4              (4)
+#define REG_R5              (5)
+#define REG_R6              (6)
+#define REG_R7              (7)
+#define REG_R8              (8)
+#define REG_R9              (9)
+#define REG_R10             (10)
+#define REG_R11             (11)
+#define REG_R12             (12)
+#define REG_R13             (13)
+#define REG_R14             (14)
+#define REG_R15             (15)
+#define REG_CPSR            (16)
+
+#define XCPTCONTEXT_REGS    (17)
+#define XCPTCONTEXT_SIZE    (4 * XCPTCONTEXT_REGS)
+
+#define REG_A1              REG_R0
+#define REG_A2              REG_R1
+#define REG_A3              REG_R2
+#define REG_A4              REG_R3
+#define REG_V1              REG_R4
+#define REG_V2              REG_R5
+#define REG_V3              REG_R6
+#define REG_V4              REG_R7
+#define REG_V5              REG_R8
+#define REG_V6              REG_R9
+#define REG_V7              REG_R10
+#define REG_SB              REG_R9
+#define REG_SL              REG_R10
+#define REG_FP              REG_R11
+#define REG_IP              REG_R12
+#define REG_SP              REG_R13
+#define REG_LR              REG_R14
+#define REG_PC              REG_R15
+
+/************************************************************
+ * Public Types
+ ************************************************************/
+
+/* This struct defines the way the registers are stored.  We
+ * need to save:
+ *
+ *  1	CPSR
+ *  7	Static registers, v1-v7 (aka r4-r10)
+ *  1	Frame pointer, fp (aka r11)
+ *  1	Stack pointer, sp (aka r13)
+ *  1	Return address, lr (aka r14)
+ * ---
+ * 11	(XCPTCONTEXT_USER_REG)
+ *
+ * On interrupts, we also need to save:
+ *  4	Volatile registers, a1-a4 (aka r0-r3)
+ *  1	Scratch Register, ip (aka r12)
+ *---
+ *  5	(XCPTCONTEXT_IRQ_REGS)
+ *
+ * For a total of 17 (XCPTCONTEXT_REGS)
+ */
+
+#ifndef __ASSEMBLY__
+struct xcptcontext
+{
+  /* The following function pointer is non-zero if there
+   * are pending signals to be processed.
+   */
+
+  void *sigdeliver; /* Actual type is sig_deliver_t */
+
+  /* These are saved copies of LR and CPSR used during
+   * signal processing.
+   */
+
+  uint32 saved_pc;
+  uint32 saved_cpsr;
+
+  /* Register save area */
+
+  uint32 regs[XCPTCONTEXT_REGS];
+};
+#endif
+
+/************************************************************
+ * Inline functions
+ ************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/* Save the current interrupt enable state & disable IRQs */
+
+static inline irqstate_t irqsave(void)
+{
+  unsigned int flags;
+  unsigned int temp;
+  __asm__ __volatile__
+    (
+     "\tmrs    %0, cpsr\n"
+     "\torr    %1, %0, #128\n"
+     "\tmsr    cpsr_c, %1"
+     : "=r" (flags), "=r" (temp)
+     :
+     : "memory");
+  return flags;
+}
+
+/* Restore saved IRQ & FIQ state */
+
+static inline void irqrestore(irqstate_t flags)
+{
+  __asm__ __volatile__
+    (
+     "msr    cpsr_c, %0"
+     :
+     : "r" (flags)
+     : "memory");
+}
+
+static inline void system_call(swint_t func, int parm1,
+			       int parm2, int parm3)
+{
+  __asm__ __volatile__
+    (
+     "mov\tr0,%0\n\t"
+     "mov\tr1,%1\n\t"
+     "mov\tr2,%2\n\t"
+     "mov\tr3,%3\n\t"
+     "swi\t0x900001\n\t"
+     :
+     : "r" ((long)(func)),  "r" ((long)(parm1)),
+       "r" ((long)(parm2)), "r" ((long)(parm3))
+     : "r0", "r1", "r2", "r3", "lr");
+}
+#endif
+
+/************************************************************
+ * Public Variables
+ ************************************************************/
+
+/************************************************************
+ * Public Function Prototypes
+ ************************************************************/
+
+#ifndef __ASSEMBLY__
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+#endif /* __ARCH_IRQ_H */
+

arch/arm/include/limits.h

@@ -0,0 +1,75 @@
+/************************************************************
+ * limits.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+#ifndef __ARCH_LIMITS_H
+#define __ARCH_LIMITS_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+#define CHAR_BIT        8
+#define SCHAR_MIN	0x80
+#define SCHAR_MAX	0x7f
+#define UCHAR_MAX	0xff
+
+/* These could be different on machines where char is unsigned */
+
+#define CHAR_MIN	SCHAR_MIN
+#define CHAR_MAX	SCHAR_MAX
+
+#define SHRT_MIN	0x8000
+#define SHRT_MAX	0x7fff
+#define USHRT_MAX	0xffff
+
+#define INT_MIN         0x80000000
+#define INT_MAX         0x7fffffff
+#define UINT_MAX	0xffffffff
+
+/* These change on 32-bit and 64-bit platforms */
+
+#define LONG_MAX	0x80000000
+#define LONG_MIN	0x7fffffff
+#define ULONG_MAX	0xffffffff
+
+#define LLONG_MAX	0x8000000000000000
+#define LLONG_MIN	0x7fffffffffffffff
+#define ULLONG_MAX	0xffffffffffffffff
+
+#endif /* __ARCH_LIMITS_H */

arch/arm/include/serial.h

@@ -0,0 +1,61 @@
+/************************************************************
+ * arch/serial.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+#ifndef __ARCH_SERIAL_H
+#define __ARCH_SERIAL_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* IOCTL commands supported by the ARM serial driver */
+
+#define TIOCSBRK        0x5401  /* BSD compatibility */
+#define TIOCCBRK        0x5402  /* " " "           " */
+#define TIOCSERGSTRUCT  0x5403  /* Get up_dev_t for port */
+
+/************************************************************
+ * Public Data
+ ************************************************************/
+
+/************************************************************
+ * Public Functions
+ ************************************************************/
+
+#endif /* __ARCH_SERIAL_H */

arch/arm/include/types.h

@@ -0,0 +1,82 @@
+/************************************************************
+ * arch/types.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/* This file should never be included directed but, rather,
+ * only indirectly through sys/types.h
+ */
+
+#ifndef __ARCH_TYPES_H
+#define __ARCH_TYPES_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/************************************************************
+ * Type Declarations
+ ************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/* These are the sizes of the standard GNU types */
+
+typedef char sbyte;
+typedef unsigned char ubyte;
+typedef unsigned char uint8;
+typedef unsigned char boolean;
+typedef short sint16;
+typedef unsigned short uint16;
+typedef int sint32;
+typedef unsigned int uint32;
+typedef long long sint64;
+typedef unsigned long long uint64;
+
+/* This is the size of the interrupt state save returned by
+ * irqsave()
+ */
+
+typedef unsigned int irqstate_t;
+
+#endif /* __ASSEMBLY__ */
+
+/************************************************************
+ * Global Function Prototypes
+ ************************************************************/
+
+#endif /* __ARCH_TYPES_H */

arch/arm/include/watchdog.h

@@ -0,0 +1,63 @@
+/************************************************************
+ * watchdog.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+#ifndef __ARCH_WATCHDOG_H
+#define __ARCH_WATCHDOG_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* IOCTL commands supported by the C5471 watchdog driver */
+
+#define WDIOC_KEEPALIVE 0x5701  /* Restart the watchdog timer */
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Public Functions
+ ************************************************************/
+
+#endif /* __ARCH_WATCHDOG_H */

arch/arm/src/Makefile

@@ -0,0 +1,124 @@
+############################################################################
+# Makefile
+#
+#   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name Gregory Nutt nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+-include chip/Make.defs
+
+MKDEP 		= $(TOPDIR)/tools/mkdeps.sh
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+CFLAGS		+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(TOPDIR)/sched
+
+HEAD_AOBJ	= $(HEAD_ASRC:.S=$(OBJEXT))
+
+ASRCS		= $(CHIP_ASRCS) $(CMN_ASRCS)
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+
+CSRCS		= $(CHIP_CSRCS) $(CMN_CSRCS)
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+LDFLAGS		= $(ARCHSCRIPT)
+EXTRA_LIBS	=
+
+LINKLIBS	=
+LDPATHES	= $(addprefix -L$(TOPDIR)/,$(dir $(LINKLIBS)))
+LDLIBS		= $(patsubst lib%,-l%,$(basename $(notdir $(LINKLIBS))))
+
+BOARDDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src/board
+
+LIBGCC		= ${shell $(CC) -print-libgcc-file-name}
+
+VPATH		= chip:common
+
+all: $(HEAD_OBJ) libarch$(LIBEXT)
+
+$(AOBJS) $(HEAD_AOBJ): %$(OBJEXT): %.S
+	$(CC) -c $(CFLAGS) -D__ASSEMBLY__ $< -o $@
+
+$(COBJS): %$(OBJEXT): %.c
+	$(CC) -c $(CFLAGS) $< -o $@
+
+libarch$(LIBEXT): $(OBJS)
+	@( for obj in $(OBJS) ; do \
+		$(AR) $@ $${obj} || \
+			{ echo "$(AR) $@ $obj FAILED!" ; exit 1 ; } ; \
+	done ; )
+
+board/libboard$(LIBEXT):
+	$(MAKE) -C board TOPDIR=$(TOPDIR) libboard$(LIBEXT)
+
+nuttx: $(HEAD_AOBJ) board/libboard$(LIBEXT)
+	$(LD) --entry=__start $(LDFLAGS) $(LDPATHES) -L$(BOARDDIR) -o $(TOPDIR)/$@ $(HEAD_AOBJ) \
+		--start-group $(LDLIBS) -lboard --end-group $(EXTRA_LIBS) $(LIBGCC) 
+	@$(NM) $(TOPDIR)/$@ | \
+	grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
+	sort > $(TOPDIR)/System.map
+	@export vflashstart=`$(OBJDUMP) --all-headers $(TOPDIR)/$@ | grep _vflashstart | cut -d' ' -f1`;  \
+	if [ ! -z "$$vflashstart" ]; then \
+		$(OBJCOPY) --adjust-section-vma=.vector=0x$$vflashstart $(TOPDIR)/$@ $(TOPDIR)/$@.flashimage; \
+		mv $(TOPDIR)/$@.flashimage $(TOPDIR)/$@; \
+	fi
+ifeq ($(CONFIG_RRLOAD_BINARY),y)
+	@$(TOPDIR)/tools/mkimage.sh --Prefix $(CROSSDEV) $(TOPDIR)/$@ $(TOPDIR)/$@.rr
+	@if [ -w /tftpboot ] ; then \
+		cp -f $(TOPDIR)/$@.rr /tftpboot/$@.rr.${CONFIG_ARCH}; \
+	fi
+endif
+
+.depend: Makefile $(SRCS)
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR=$(TOPDIR) depend ; \
+	if
+	$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	@touch $@
+
+depend: .depend
+
+clean:
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR=$(TOPDIR) clean ; \
+	fi
+	@rm -f libarch$(LIBEXT) *~
+	@if [ ! -z "$(OBJEXT)" ]; then rm -f *$(OBJEXT); fi
+
+distclean: clean
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR=$(TOPDIR) distclean ; \
+	fi
+	@rm -f Make.dep .depend
+
+-include Make.dep

arch/arm/src/c5471/Make.defs

@@ -0,0 +1,48 @@
+############################################################################
+# c5471/Make.defs
+#
+#   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name Gregory Nutt nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+HEAD_ASRC	= up_nommuhead.S
+
+CMN_ASRCS	= up_saveusercontext.S up_fullcontextrestore.S
+CMN_CSRCS	= up_allocateheap.c up_assert.c up_blocktask.c up_copystate.c \
+		  up_createstack.c up_dataabort.c up_delay.c up_exit.c up_idle.c \
+		  up_initialize.c up_initialstate.c up_interruptcontext.c \
+		  up_prefetchabort.c up_releasepending.c up_releasestack.c \
+		  up_reprioritizertr.c up_schedulesigaction.c up_sigdeliver.c \
+		  up_syscall.c up_unblocktask.c up_undefinedinsn.c up_usestack.c
+
+CHIP_ASRCS	= c5471_lowputc.S c5471_vectors.S
+CHIP_CSRCS	= c5471_doirq.c c5471_irq.c c5471_serial.c c5471_timerisr.c \
+		  c5471_watchdog.c

arch/arm/src/c5471/c5471_doirq.c

@@ -0,0 +1,104 @@
+/************************************************************
+ * c5471/c5471_doirq.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <nuttx/irq.h>
+#include <nuttx/arch.h>
+#include <assert.h>
+#include "up_arch.h"
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/************************************************************
+ * Public Data
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+void c5471_doirq(int irq, uint32* regs)
+{
+  up_ledon(LED_INIRQ);
+#ifdef CONFIG_SUPPRESS_INTERRUPTS
+  PANIC(OSERR_ERREXCEPTION);
+#else
+  if ((unsigned)irq < NR_IRQS)
+    {
+       /* Current regs non-zero indicates that we are processing
+        * an interrupt; current_regs is also used to manage
+        * interrupt level context switches.
+        */
+
+       current_regs = regs;
+
+       /* Mask and acknowledge the interrupt */
+
+       up_maskack_irq(irq);
+
+       /* Deliver the IRQ */
+
+       irq_dispatch(irq, regs);
+
+       /* Indicate that we are no long in an interrupt handler */
+
+       current_regs = NULL;
+
+       /* Unmask the last interrupt (global interrupts are still
+        * disabled.
+        */
+
+       up_enable_irq(irq);
+    }
+  up_ledoff(LED_INIRQ);
+#endif
+}

arch/arm/src/c5471/c5471_irq.c

@@ -0,0 +1,242 @@
+/************************************************************
+ * c5471/c5471_irq.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <nuttx/irq.h>
+#include "up_arch.h"
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+#define ILR_EDGESENSITIVE 0x00000020
+#define ILR_PRIORITY      0x0000001E
+
+/************************************************************
+ * Public Data
+ ************************************************************/
+
+uint32 *current_regs;
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/* The value of _vflashstart is defined in ld.script.  It
+ * could be hard-coded because we know that correct IRAM
+ * area is 0xffc00000.
+ */
+
+extern int _svectors; /* Type does not matter */
+
+/* The C5471 has FLASH at the low end of memory.  The
+ * rrload bootloaer will catch all interrupts and re-vector
+ * them to vectors stored in IRAM.  The following table is
+ * used to initialize those vectors.
+ */
+
+static up_vector_t g_vectorinittab[] =
+{
+  (up_vector_t)NULL,
+  up_vectorundefinsn,
+  up_vectorswi,
+  up_vectorprefetch,
+  up_vectordata,
+  up_vectoraddrexcptn,
+  up_vectorirq,
+  up_vectorfiq
+};
+#define NVECTORS ((sizeof(g_vectorinittab)) / sizeof(up_vector_t))
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_ackirq
+ *
+ * Description:
+ *   Acknowlede the IRQ.Bit 0 of the Interrupt Control
+ *   Register ==  New IRQ agreement (NEW_IRQ_AGR). Reset IRQ
+ *   output. Clear source IRQ register. Enables a new IRQ
+ *   generation. Reset by internal logic.
+ *
+ ************************************************************/
+
+static inline void up_ackirq(unsigned int irq)
+{
+  uint32 reg;
+  reg = getreg32(SRC_IRQ_REG);              /* Insure appropriate IT_REG bit clears */
+  putreg32(reg | 0x00000001, INT_CTRL_REG); /* write the NEW_IRQ_AGR bit. */
+}
+
+/************************************************************
+ * Name: up_ackfiq
+ *
+ * Description:
+ *   Acknowledge the FIQ.  Bit 1 of the Interrupt Control
+ *   Register ==  New FIQ agreement (NEW_FIQ_AGR). Reset FIQ
+ *   output. Clear source FIQ register. Enables a new FIQ
+ *   generation. Reset by internal logic.
+ *
+ ************************************************************/
+
+static inline void up_ackfiq(unsigned int irq)
+{
+  uint32 reg;
+  reg = getreg32(SRC_FIQ_REG);              /* Insure appropriate IT_REG bit clears */
+  putreg32(reg | 0x00000002, INT_CTRL_REG); /* write the NEW_FIQ_AGR bit. */
+}
+
+/************************************************************
+ * Name: up_vectorinitialize
+ ************************************************************/
+
+static inline void up_vectorinitialize(void)
+{
+  up_vector_t *src  = g_vectorinittab;
+  up_vector_t *dest = (up_vector_t*)&_svectors;
+  int i;
+
+  for (i = 0; i < NVECTORS; i++)
+    {
+      *dest++ = *src++;
+    }
+}
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_irqinitialize
+ ************************************************************/
+
+void up_irqinitialize(void)
+{
+  /* Disable all interrupts. */
+
+  putreg32(0x0000ffff, MASK_IT_REG);
+
+  /* Clear any pending interrupts */
+
+  up_ackirq(0);
+  up_ackfiq(0);
+  putreg32(0x00000000, IT_REG);
+
+  /* Override hardware defaults */
+
+  putreg32(ILR_EDGESENSITIVE | ILR_PRIORITY, ILR_IRQ2_REG);
+  putreg32(ILR_EDGESENSITIVE | ILR_PRIORITY, ILR_IRQ4_REG);
+  putreg32(ILR_PRIORITY,                     ILR_IRQ6_REG);
+  putreg32(ILR_EDGESENSITIVE | ILR_PRIORITY, ILR_IRQ15_REG);
+
+  /* Initialize hardware interrupt vectors */
+
+  up_vectorinitialize();
+  current_regs = NULL;
+
+  /* And finally, enable interrupts */
+
+#ifndef CONFIG_SUPPRESS_INTERRUPTS
+  irqrestore(SVC_MODE | PSR_F_BIT);
+#endif
+}
+
+/************************************************************
+ * Name: up_disable_irq
+ *
+ * Description:
+ *   Disable the IRQ specified by 'irq'
+ *
+ ************************************************************/
+
+void up_disable_irq(int irq)
+{
+  if ((unsigned)irq < NR_IRQS)
+    {
+      uint32 reg = getreg32(MASK_IT_REG);
+      putreg32(reg | (1 << irq), MASK_IT_REG);
+    }
+}
+
+/************************************************************
+ * Name: up_enable_irq
+ *
+ * Description:
+ *   Enable the IRQ specified by 'irq'
+ *
+ ************************************************************/
+
+void up_enable_irq(int irq)
+{
+  if ((unsigned)irq < NR_IRQS)
+    {
+      uint32 reg = getreg32(MASK_IT_REG);
+      putreg32(reg & ~(1 << irq), MASK_IT_REG);
+    }
+}
+
+/************************************************************
+ * Name: up_maskack_irq
+ *
+ * Description:
+ *   Mask the IRQ and acknowledge it
+ *
+ ************************************************************/
+
+void up_maskack_irq(int irq)
+{
+  uint32 reg = getreg32(INT_CTRL_REG);
+
+  /* Mask the interrupt */
+
+  reg = getreg32(MASK_IT_REG);
+  putreg32(reg | (1 << irq), MASK_IT_REG);
+
+  /* Set the NEW_IRQ_AGR bit.  This clears the IRQ src register
+   * enables generation of a new IRQ.
+   */
+
+  reg = getreg32(INT_CTRL_REG);
+  putreg32(reg | 0x00000001, INT_CTRL_REG); /* write the NEW_IRQ_AGR bit. */
+}

arch/arm/src/c5471/c5471_lowputc.S

@@ -0,0 +1,127 @@
+/**************************************************************************
+ * c5471/c5471_lowputc.S
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **************************************************************************/
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <nuttx/config.h>
+#include "up_internal.h"
+#include "up_arch.h"
+
+/**************************************************************************
+ * Private Definitions
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Types
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Function Prototypes
+ **************************************************************************/
+
+/**************************************************************************
+ * Global Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Public Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: up_lowputc
+ **************************************************************************/
+
+/* This assembly language version has the advantage that it can does not
+ * require a C stack and uses only r0-r1.  Hence it can be used during
+ * early boot phases.
+ */
+
+	.text
+	.global	up_lowputc
+	.type	up_lowputc, function
+up_lowputc:
+	/* On entry, r0 holds the character to be printed */
+
+#ifdef CONFIG_SERIAL_IRDA_CONSOLE
+	ldr	r2, =UART_IRDA_BASE	/* r2=IRDA UART base */
+#else
+	ldr	r2, =UART_MODEM_BASE	/* r2=Modem UART base */
+#endif
+
+	/* Poll bit 0 of the UART_SSR register.  When the bit
+	 * is clear, the TX FIFO is no longer full
+	 */
+
+1:	ldr	r1, [r2, #UART_SSR_OFFS]
+	tst	r1, #UART_SSR_TXFULL
+	bne	1b
+
+	/* Send the character by writing it into the UART_THR
+	 * register.
+	 */
+
+	str     r0, [r2, #UART_THR_OFFS]
+
+	/* Wait for the tranmsit holding regiser (THR) to be
+	 * emptied. This is detemined when bit 6 of the LSR
+	 * is set.
+	 */
+
+2:	ldr     r1, [r2, #UART_LSR_OFFS]
+	tst     r1, #0x00000020
+	beq     2b
+
+	/* If the character that we just sent was a linefeed,
+	 * then send a carriage return as well.
+	 */
+
+	teq     r0, #'\n'
+	moveq   r0, #'\r'
+	beq     1b
+
+	/* And return */
+
+	mov     pc, lr
+

arch/arm/src/c5471/c5471_timerisr.c

@@ -0,0 +1,125 @@
+/************************************************************
+ * c5471/c5471_timerisr.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+#include "clock_internal.h"
+#include "up_internal.h"
+#include "up_arch.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* We want the general purpose timer running at the rate
+ * MSEC_PER_TICK. The C5471 clock is 47.5MHz and we're using
+ * a timer PTV value of 3 (3 == divide incoming frequency by
+ * 16) which then yields a 16 bitCLKS_PER_INT value
+ * of 29687.
+ *
+ *   47500000 / 16 = 2968750 clocks/sec
+ *   2968750 / 100 = 29687   clocks/ 100Hz interrupt
+ *
+ */
+
+#define CLKS_PER_INT       29687
+#define CLKS_PER_INT_SHIFT 5
+#define AR                 0x00000010
+#define ST                 0x00000008
+#define PTV                0x00000003
+
+/************************************************************
+ * Private Types
+ ************************************************************/
+
+/************************************************************
+ * Private Function Prototypes
+ ************************************************************/
+
+/************************************************************
+ * Global Functions
+ ************************************************************/
+
+/************************************************************
+ * Function:  up_timerisr
+ *
+ * Description:
+ *   The timer ISR will perform a variety of services for
+ *   various portions of the systems.
+ *
+ ************************************************************/
+
+int up_timerisr(int irq, uint32 *regs)
+{
+   /* Process timer interrupt */
+
+   sched_process_timer();
+   return 0;
+}
+
+/************************************************************
+ * Function:  up_timerinit
+ *
+ * Description:
+ *   This function is called during start-up to initialize
+ *   the timer interrupt.
+ *
+ ************************************************************/
+
+void up_timerinit(void)
+{
+  uint32 val;
+
+  up_disable_irq(C5471_IRQ_SYSTIMER);
+
+  /* Start the general purpose timer running in auto-reload mode
+   * so that an interrupt is generated at the rate MSEC_PER_TICK.
+   */
+
+  val = ((CLKS_PER_INT-1) << CLKS_PER_INT_SHIFT) | AR | ST | PTV;
+  putreg32(val, C5471_TIMER2_CTRL);
+
+  /* Attach and enable the timer interrupt */
+
+  irq_attach(C5471_IRQ_SYSTIMER, (xcpt_t)up_timerisr);
+  up_enable_irq(C5471_IRQ_SYSTIMER);
+}
+

arch/arm/src/c5471/c5471_vectors.S

@@ -0,0 +1,449 @@
+/********************************************************************
+ * c5471/c5471_vectors.S
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ********************************************************************/
+
+/********************************************************************
+ * Included Files
+ ********************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/irq.h>
+#include "up_arch.h"
+
+/********************************************************************
+ * Definitions
+ ********************************************************************/
+
+/********************************************************************
+ * Global Data
+ ********************************************************************/
+
+	.data
+g_irqtmp:
+	.word	0		/* Saved lr */
+	.word	0		/* Saved spsr */
+g_undeftmp:
+	.word	0		/* Saved lr */
+	.word	0		/* Saved spsr */
+g_aborttmp:
+	.word	0		/* Saved lr */
+	.word	0		/* Saved spsr */
+
+/********************************************************************
+ * Assembly Macros
+ ********************************************************************/
+
+/********************************************************************
+ * Private Functions
+ ********************************************************************/
+
+	.text
+
+/********************************************************************
+ * Public Functions
+ ********************************************************************/
+
+	.text
+
+/********************************************************************
+ * Name: up_vectorirq
+ *
+ * Description:
+ *   Interrupt excetpion. Entered in IRQ mode with spsr = SVC
+ *   CPSR, lr = SVC PC
+ ********************************************************************/
+
+	.globl	up_vectorirq
+	.type	up_vectorirq, %function
+up_vectorirq:
+	/* On entry, we are in IRQ mode.  We are free to use
+	 * the IRQ mode r13 and r14.
+         *
+	 */
+
+	ldr	r13, .Lirqtmp
+	sub	lr, lr, #4
+	str	lr, [r13]			@ save lr_IRQ
+	mrs	lr, spsr
+	str	lr, [r13, #4]			@ save spsr_IRQ
+
+	/* Then switch back to SVC mode */
+
+	bic	lr, lr, #MODE_MASK	/* Keep F and T bits */
+	orr	lr, lr, #(SVC_MODE | PSR_I_BIT)
+	msr	cpsr_c, lr		/* Switch to SVC mode */
+
+	/* Create a context structure.  First set aside a stack frame
+	 * and store r0-r12 into the frame.
+	 */
+
+	sub	sp, sp, #XCPTCONTEXT_SIZE
+	stmia	sp, {r0-r12}		/* Save the SVC mode regs */
+
+	/* Get the correct values of r13(sp) and r14(lr) in r1 and r2 */
+
+	add	r1, sp, #XCPTCONTEXT_SIZE
+	mov	r2, r14
+
+	/* Get the values for r15(pc) and CPSR in r3 and r4 */
+
+	ldr	r0, .Lirqtmp		/* Points to temp storage */
+	ldmia	r0, {r3, r4}		/* Recover r1=lr_IRQ, r2=spsr_IRQ */
+
+	add	r0, sp, #(4*REG_SP)	/* Offset to pc, cpsr storage */
+	stmia	r0, {r1-r4}
+
+	/* Now decode the interrupt */
+
+#if 0
+	ldr	lr, =SRC_IRQ_BIN_REG	/* Fetch encoded IRQ */
+	ldr	r0, [lr]
+	and	r0, r0, #0x0f		/* Valid range is 0..15 */
+
+	/* Problems here... cannot read SRC_IRQ_BIN_REQ (and/or
+	 * SRC_IRQ_REQ because this will clear edge triggered
+	 * interrupts.  Plus, no way to validate spurious
+	 * interrupt.
+	 */
+#else
+	ldr	r6, =SRC_IRQ_REG
+	ldr     r6, [r6]		/* Get source IRQ reg */
+	mov     r0, #0			/* Assume IRQ0_IRQ set */
+.Lmorebits:
+	tst     r6, #1			/* Is IRQ set? */
+	bne     .Lhaveirq		/* Yes... we have the IRQ */
+	add     r0, r0, #1		/* Setup next IRQ */
+	mov     r6, r6, lsr #1		/* Shift right one */
+	cmp     r0, #16			/* Only 16 valid bits */
+	bcc     .Lmorebits		/* Keep until we have looked
+					 * at all bits */
+	b	.Lnoirqset		/* If we get here, there is
+					 * no pending interrupt */
+.Lhaveirq:
+#endif
+	/* Then call the IRQ handler with interrupt disabled. */
+
+	mov	fp, #0			/* Init frame pointer */
+	mov	r1, sp			/* Get r1=xcp */
+	bl	c5471_doirq		/* Call the handler */
+
+	/* Restore the CPSR, SVC modr registers and return */
+.Lnoirqset:
+	ldr	r0, [sp, #(4*REG_CPSR)]	/* Setup the SVC mode SPSR */
+	msr	spsr, r0
+	ldmia	sp, {r0-r15}^		/* Return */
+
+.Lirqtmp:
+	.word	g_irqtmp
+
+	.align	5
+
+/********************************************************************
+ * Function: up_vectorswi
+ * 
+ * Description:
+ *   SWI interrupt. We enter the SWI in SVC mode
+ ********************************************************************/
+
+	.globl	up_vectorswi
+	.type	up_vectorswi, %function
+up_vectorswi:
+
+	/* The c547x rrload bootloader intemediates all
+	 * interrupts.  For the* case of the SWI, it mucked
+	 * with the stack to create some temporary registers.
+	 * We'll have to recover from this mucking here.
+	 */
+
+	ldr	r14, [sp,#-0x4]		/* rrload workaround */
+
+	/* Create a context structure.  First set aside a stack frame
+	 * and store r0-r12 into the frame.
+	 */
+
+	sub	sp, sp, #XCPTCONTEXT_SIZE
+	stmia	sp, {r0-r12}		/* Save the SVC mode regs */
+
+	/* Get the correct values of r13(sp), r14(lr), r15(pc)
+	 * and CPSR in r1-r4 */
+
+	add	r1, sp, #XCPTCONTEXT_SIZE
+	mov	r2, r14			/* R14 is altered on return from SWI */
+	mov	r3, r14			/* Save r14 as the PC as well */
+	mrs	r4, spsr		/* Get the saved CPSR */
+
+	add	r0, sp, #(4*REG_SP)	/* Offset to pc, cpsr storage */
+	stmia	r0, {r1-r4}
+
+	/* Then call the SWI handler with interrupt disabled.
+	 * void up_syscall(struct xcptcontext *xcp)
+	 */
+
+	mov	fp, #0			/* Init frame pointer */
+	mov	r0, sp			/* Get r0=xcp */
+	bl	up_syscall		/* Call the handler */
+
+	/* Restore the CPSR, SVC modr registers and return */
+
+	ldr	r0, [sp, #(4*REG_CPSR)]	/* Setup the SVC mode SPSR */
+	msr	spsr, r0
+	ldmia	sp, {r0-r15}^		/* Return */
+
+	.align	5
+
+/********************************************************************
+ * Name: up_vectordata
+ *
+ * Description:
+ *   Data abort Exception dispatcher. Give control to data
+ *   abort handler.  This function is entered in ABORT mode
+ *   with spsr = SVC CPSR, lr = SVC PC
+ *
+ ********************************************************************/
+	
+	.globl	up_vectordata
+	.type	up_vectordata, %function
+up_vectordata:
+	/* On entry we are free to use the ABORT mode registers
+	 * r13 and r14
+	 */
+
+	ldr	r13, .Ldaborttmp	/* Points to temp storage */
+	sub	lr, lr, #8		/* Fixup return */
+	str	lr, [r13]		/* Save in temp storage */
+	mrs	lr, spsr		/* Get SPSR */
+	str	lr, [r13, #4]		/* Save in temp storage */
+
+	/* Then switch back to SVC mode */
+
+	bic	lr, lr, #MODE_MASK	/* Keep F and T bits */
+	orr	lr, lr, #(SVC_MODE | PSR_I_BIT)
+	msr	cpsr_c, lr		/* Switch to SVC mode */
+
+	/* Create a context structure.  First set aside a stack frame
+	 * and store r0-r12 into the frame.
+	 */
+
+	sub	sp, sp, #XCPTCONTEXT_SIZE
+	stmia	sp, {r0-r12}		/* Save the SVC mode regs */
+
+	/* Get the correct values of r13(sp) and r14(lr) in r1 and r2 */
+
+	add	r1, sp, #XCPTCONTEXT_SIZE
+	mov	r2, r14
+
+	/* Get the values for r15(pc) and CPSR in r3 and r4 */
+
+	ldr	r0, .Ldaborttmp		/* Points to temp storage */
+	ldmia	r0, {r3, r4}		/* Recover r1=lr_IRQ, r2=spsr_IRQ */
+
+	add	r0, sp, #(4*REG_SP)	/* Offset to pc, cpsr storage */
+	stmia	r0, {r1-r4}
+
+	/* Then call the data abort handler with interrupt disabled.
+	 * void up_dataabort(struct xcptcontext *xcp)
+	 */
+
+	mov	fp, #0			/* Init frame pointer */
+	mov	r0, sp			/* Get r0=xcp */
+	bl	up_dataabort		/* Call the handler */
+
+	/* Restore the CPSR, SVC modr registers and return */
+
+	ldr	r0, [sp, #(4*REG_CPSR)]	/* Setup the SVC mode SPSR */
+	msr	spsr_cxsf, r0
+	ldmia	sp, {r0-r15}^		/* Return */
+
+.Ldaborttmp:
+	.word	g_aborttmp
+
+	.align	5
+
+/********************************************************************
+ * Name: up_vectorprefetch
+ *
+ * Description:
+ *    Prefetch abort exception.  Entered in ABT mode with
+ *    spsr = SVC CPSR, lr = SVC PC
+ ********************************************************************/
+	
+	.globl	up_vectorprefetch
+	.type	up_vectorprefetch, %function
+up_vectorprefetch:
+	/* On entry we are free to use the ABORT mode registers
+	 * r13 and r14
+	 */
+
+	ldr	r13, .Lpaborttmp	/* Points to temp storage */
+	sub	lr, lr, #4		/* Fixup return */
+	str	lr, [r13]		/* Save in temp storage */
+	mrs	lr, spsr		/* Get SPSR */
+	str	lr, [r13, #4]		/* Save in temp storage */
+
+	/* Then switch back to SVC mode */
+
+	bic	lr, lr, #MODE_MASK	/* Keep F and T bits */
+	orr	lr, lr, #(SVC_MODE | PSR_I_BIT)
+	msr	cpsr_c, lr		/* Switch to SVC mode */
+
+	/* Create a context structure.  First set aside a stack frame
+	 * and store r0-r12 into the frame.
+	 */
+
+	sub	sp, sp, #XCPTCONTEXT_SIZE
+	stmia	sp, {r0-r12}		/* Save the SVC mode regs */
+
+	/* Get the correct values of r13(sp) and r14(lr) in r1 and r2 */
+
+	add	r1, sp, #XCPTCONTEXT_SIZE
+	mov	r2, r14
+
+	/* Get the values for r15(pc) and CPSR in r3 and r4 */
+
+	ldr	r0, .Lpaborttmp		/* Points to temp storage */
+	ldmia	r0, {r3, r4}		/* Recover r1=lr_IRQ, r2=spsr_IRQ */
+
+	add	r0, sp, #(4*REG_SP)	/* Offset to pc, cpsr storage */
+	stmia	r0, {r1-r4}
+
+	/* Then call the prefetch abort handler with interrupt disabled.
+	 * void up_prefetchabort(struct xcptcontext *xcp)
+	 */
+
+	mov	fp, #0			/* Init frame pointer */
+	mov	r0, sp			/* Get r0=xcp */
+	bl	up_prefetchabort	/* Call the handler */
+
+	/* Restore the CPSR, SVC modr registers and return */
+
+	ldr	r0, [sp, #(4*REG_CPSR)]	/* Setup the SVC mode SPSR */
+	msr	spsr_cxsf, r0
+	ldmia	sp, {r0-r15}^		/* Return */
+
+.Lpaborttmp:
+	.word	g_aborttmp
+
+	.align	5
+
+/********************************************************************
+ * Name: up_vectorundefinsn
+ *
+ * Description:
+ *   Undefined instruction entry exception.  Entered in
+ *   UND mode, spsr = SVC  CPSR, lr = SVC PC
+ *
+ ********************************************************************/
+	
+	.globl	up_vectorundefinsn
+	.type	up_vectorundefinsn, %function
+up_vectorundefinsn:
+	/* On entry we are free to use the UND mode registers
+	 * r13 and r14
+	 */
+
+	ldr	r13, .Lundeftmp		/* Points to temp storage */
+	str	lr, [r13]		/* Save in temp storage */
+	mrs	lr, spsr		/* Get SPSR */
+	str	lr, [r13, #4]		/* Save in temp storage */
+
+	/* Then switch back to SVC mode */
+
+	bic	lr, lr, #MODE_MASK	/* Keep F and T bits */
+	orr	lr, lr, #(SVC_MODE | PSR_I_BIT)
+	msr	cpsr_c, lr		/* Switch to SVC mode */
+
+	/* Create a context structure.  First set aside a stack frame
+	 * and store r0-r12 into the frame.
+	 */
+
+	sub	sp, sp, #XCPTCONTEXT_SIZE
+	stmia	sp, {r0-r12}		/* Save the SVC mode regs */
+
+	/* Get the correct values of r13(sp) and r14(lr) in r1 and r2 */
+
+	add	r1, sp, #XCPTCONTEXT_SIZE
+	mov	r2, r14
+
+	/* Get the values for r15(pc) and CPSR in r3 and r4 */
+
+	ldr	r0, .Lundeftmp		/* Points to temp storage */
+	ldmia	r0, {r3, r4}		/* Recover r1=lr_IRQ, r2=spsr_IRQ */
+
+	add	r0, sp, #(4*REG_SP)	/* Offset to pc, cpsr storage */
+	stmia	r0, {r1-r4}
+
+	/* Then call the undef insn handler with interrupt disabled.
+	 * void up_undefinedinsn(struct xcptcontext *xcp)
+	 */
+
+	mov	fp, #0			/* Init frame pointer */
+	mov	r0, sp			/* Get r0=xcp */
+	bl	up_undefinedinsn	/* Call the handler */
+
+	/* Restore the CPSR, SVC modr registers and return */
+
+	ldr	r0, [sp, #(4*REG_CPSR)]	/* Setup the SVC mode SPSR */
+	msr	spsr_cxsf, r0
+	ldmia	sp, {r0-r15}^		/* Return */
+
+.Lundeftmp:
+	.word	g_undeftmp
+
+	.align	5
+
+/********************************************************************
+ * Name: up_vectorfiq
+ *
+ * Description:
+ *   Shouldn't happen
+ ********************************************************************/
+
+	.globl	up_vectorfiq
+	.type	up_vectorfiq, %function
+up_vectorfiq:
+	subs	pc, lr, #4
+
+/********************************************************************
+ *  Name: up_vectoraddrexcption
+ *
+ * Description:
+ *   Shouldn't happen
+ *
+ ********************************************************************/
+
+	.globl	up_vectoraddrexcptn
+	.type	up_vectoraddrexcptn, %function
+up_vectoraddrexcptn:
+	b	up_vectoraddrexcptn
+	.end

arch/arm/src/c5471/c5471_watchdog.c

@@ -0,0 +1,392 @@
+/**************************************************************************
+ * c5471/c5471_watchdog.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **************************************************************************/
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+#include <nuttx/fs.h>
+#include <nuttx/irq.h>
+#include <arch/watchdog.h>
+#include "up_arch.h"
+
+/**************************************************************************
+ * Definitions
+ **************************************************************************/
+
+#undef CONFIG_SOFTWARE_TEST
+#undef CONFIG_SOFTWARE_REBOOT
+#undef CONFIG_WATCHDOG_STRICT
+
+#define MAX_WDT_USEC           353200
+#define MAX_PRESCALER          256
+#define C5471_TIMER_STOP       0
+
+#define C5471_TIMER_PRESCALER  0x07          /* Bits 0-2: Prescale value */
+#define C5471_TIMER_STARTBIT   (1 << 3)      /* Bit 3: Start timer bit */
+#define C5471_TIMER_AUTORELOAD (1 << 4)      /* Bit 4: Auto-reload timer */
+#define C5471_TIMER_LOADTIM    (0xffff << 5) /* Bits 20-5: Load timer value */
+#define C5471_TIMER_MODE       (1 << 21)     /* Bit 21: Timer mode */
+#define C5471_DISABLE_VALUE1   (0xf5 << 22)  /* Bits 29-22: WD disable */
+#define C5471_DISABLE_VALUE2   (0xa0 << 22)
+
+#define CLOCK_KHZ              47500
+#define CLOCK_MHZx2            95
+
+/* Macros to manage access to to watchdog timer macros */
+
+#define c5471_wdt_cntl  (*(volatile uint32*)C5471_TIMER0_CTRL)
+#define c5471_wdt_count (*(volatile uint32*)C5471_TIMER0_CNT)
+
+/**************************************************************************
+ * Private Types
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Function Prototypes
+ **************************************************************************/
+
+/* Local implementation of timer interface */
+
+static inline unsigned int wdt_prescaletoptv(unsigned int prescale);
+
+static int     wdt_setusec(uint32 usec);
+static int     wdt_interrupt(int irq, void *context);
+
+static int     wdt_open(struct file *filep);
+static int     wdt_close(struct file *filep);
+static ssize_t wdt_read(struct file *filep, char *buffer, size_t buflen);
+static ssize_t wdt_write(struct file *filep, const char *buffer, size_t buflen);
+static int     wdt_ioctl(struct file *filep, int cmd, uint32 arg);
+
+/**************************************************************************
+ * Private Data
+ **************************************************************************/
+
+static boolean g_wdtopen;
+
+struct file_operations g_wdtops =
+{
+  .open  = wdt_open,
+  .close = wdt_close,
+  .read  = wdt_read,
+  .write = wdt_write,
+  .ioctl = wdt_ioctl,
+};
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: wdt_prescaletoptv
+ **************************************************************************/
+
+static inline unsigned int wdt_prescaletoptv(unsigned int prescale)
+{
+  unsigned int ptv = 0;
+
+  if (prescale > 255)
+    {
+      ptv = 7;
+    }
+  else
+    {
+      unsigned int value = prescale >> 1;
+
+      /* 0: 0-2
+       * 1: 3-4
+       * 2: 5-8
+       * 3: 9-16
+       * 4: 17-32
+       * 5: 33-64
+       * 6: 65-128
+       * 7: 129-
+       */
+
+      while (value > 1)
+        {
+          value >>= 1;
+          ptv++;
+        }
+    }
+
+  dbg("prescale=%d -> ptv=%d\n", prescale, ptv);
+  return ptv;
+}
+
+/**************************************************************************
+ * Name: wdt_setusec
+ **************************************************************************/
+
+static int wdt_setusec(uint32 usec)
+{
+  /* prescaler: clock / prescaler = #clock ticks per counter in ptv
+   * divisor:   #counts until the interrupt comes.
+   */
+
+  uint32 prescaler = MAX_PRESCALER;
+  uint32 divisor   = 1;
+  uint32 mode;
+
+  dbg("usec=%d\n", usec);
+
+  /* Calculate a value of prescaler and divisor that will be able
+   * to count to the usec.  It may not be exact or the best
+   * possible set, but it's a quick and simple algorithm.
+   *
+   *    divisor max = 0x10000
+   *    prescaler max = MAX_PRESCALER
+   */
+
+  do
+    {
+      divisor = (CLOCK_MHZx2 * usec) / (prescaler * 2);
+      dbg("divisor=0x%x prescaler=0x%x\n", divisor, prescaler);
+
+      if (divisor >= 0x10000)
+        {
+          if (prescaler == MAX_PRESCALER)
+            { 
+              /* This is the max possible ~2.5 seconds. */
+
+              dbg("prescaler=0x%x too big!\n", prescaler);
+              return ERROR;
+            }
+
+          prescaler <<= 1;
+          if (prescaler > MAX_PRESCALER)
+            {
+              prescaler = MAX_PRESCALER;
+            }
+        }
+    }
+  while (divisor >= 0x10000);
+
+  dbg("prescaler=0x%x divisor=0x%x\n", prescaler, divisor);
+
+  mode  = wdt_prescaletoptv(prescaler);
+  mode &= ~C5471_TIMER_AUTORELOAD; /* One shot mode. */
+  mode |= divisor << 5;
+  dbg("mode=0x%x\n", mode);
+
+  c5471_wdt_cntl = mode;
+
+  /* Now start the watchdog */
+
+  c5471_wdt_cntl |= C5471_TIMER_STARTBIT;
+  dbg("cntl_timer=0x%x\n", c5471_wdt_cntl);
+
+  return 0;
+}
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: wdt_interrupt
+ **************************************************************************/
+
+static int wdt_interrupt(int irq, void *context)
+{
+  dbg("expired\n");
+
+#if defined(CONFIG_SOFTWARE_REBOOT)
+#  if defined(CONFIG_SOFTWARE_TEST)
+  dbg("  Test only\n");
+#  else
+  dbg("  Re-booting\n");
+#    warning "Add logic to reset CPU here"
+#  endif
+#else
+  dbg("  No reboot\n");
+#endif
+  return OK;
+}
+
+/**************************************************************************
+ * Name: wdt_read
+ **************************************************************************/
+
+static ssize_t wdt_read(struct file *filep, char *buffer, size_t buflen)
+{
+  /* We are going to return "NNNNNNNN NNNNNNNN."  The followig logic will
+   * not work if the user provides a buffer smaller than 18 bytes.
+   */
+
+  dbg("buflen=%d\n", buflen);
+  if (buflen >= 18)
+    {
+      sprintf(buffer, "#08x %08x\n", c5471_wdt_cntl, c5471_wdt_count);
+      return 18;
+    }
+  return 0;
+}
+
+/**************************************************************************
+ * Name: wdt_write
+ **************************************************************************/
+
+static ssize_t wdt_write(struct file *filep, const char *buffer, size_t buflen)
+{
+  dbg("buflen=%d\n", buflen);
+  if (buflen)
+    {
+      /* Reset the timer to the maximum delay */
+
+      wdt_setusec(MAX_WDT_USEC);
+      return 1;
+    }
+
+  return 0;
+}
+
+/**************************************************************************
+ * Name: wdt_ioctl
+ **************************************************************************/
+
+static int wdt_ioctl(struct file *filep, int cmd, uint32 arg)
+{
+  dbg("ioctl Call: cmd=0x%x arg=0x%x", cmd, arg);
+
+  /* Process the the IOCTL command (see arch/watchdog.h) */
+
+  switch(cmd)
+    {
+    case WDIOC_KEEPALIVE:
+      wdt_setusec(MAX_WDT_USEC);
+      break;
+
+    default:
+      *get_errno_ptr() = ENOTTY;
+      return ERROR;
+    }
+
+  return OK;
+}
+
+/**************************************************************************
+ * Name: wdt_open
+ **************************************************************************/
+
+static int wdt_open(struct file *filep)
+{
+  dbg("");
+
+  if (g_wdtopen)
+    {
+      *get_errno_ptr() = EBUSY;
+    }
+
+  /* This will automatically load the timer with its max
+   * count and start it running.
+   */
+
+  c5471_wdt_cntl = C5471_DISABLE_VALUE1;
+  c5471_wdt_cntl = C5471_DISABLE_VALUE2;
+
+  g_wdtopen = TRUE;
+  return OK;
+}
+
+/**************************************************************************
+ * Name: wdt_close
+ **************************************************************************/
+
+static int wdt_close(struct file *filep)
+{
+  dbg("");
+
+  /* The task controlling the watchdog has terminated.  Take the timer
+   *  the
+   * watchdog in interrupt mode -- we are going to reset unless the
+   * reopened again soon.
+   */
+
+#ifndef CONFIG_WATCHDOG_STRICT
+  c5471_wdt_cntl = C5471_TIMER_MODE;
+#endif
+
+  g_wdtopen = FALSE;
+  return 0;
+}
+
+/**************************************************************************
+ * Public Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: up_wdtinit
+ **************************************************************************/
+
+int up_wdtinit(void)
+{
+  int ret;
+
+  dbg("C547x Watchdog Driver\n");
+
+  /* Register as /dev/wdt */
+
+  ret = register_inode("/dev/wdt", &g_wdtops, 0666, NULL);
+  if (ret)
+    {
+      return ERROR;
+    }
+
+  /* Register for an interrupt level callback through wdt_interrupt */
+
+  dbg("Attach to IRQ=%d\n", C5471_IRQ_WATCHDOG);
+
+  /* Make sure that the timer is stopped */
+
+  c5471_wdt_cntl = C5471_TIMER_STOP;
+
+  /* Request the interrupt. */
+
+  ret = irq_attach(C5471_IRQ_WATCHDOG, wdt_interrupt);
+  if (ret)
+    {
+      unregister_inode("/dev/wdt");
+      return ERROR;
+    }
+
+  return OK;
+}

arch/arm/src/c5471/chip.h

@@ -0,0 +1,323 @@
+/************************************************************
+ * c5471/chip.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+#ifndef __C5471_CHIP_H
+#define __C5471_CHIP_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* UARTs ****************************************************/
+
+#define UART_IRDA_BASE         0xffff0800
+#define UART_MODEM_BASE        0xffff1000
+#define UARTn_IO_RANGE         0x00000800
+
+/* Common UART Registers.  Expressed as offsets from the BASE address */
+
+#define UART_RHR_OFFS          0x00000000 /* Rcv Holding Register */
+#define UART_THR_OFFS          0x00000004 /* Xmit Holding Register */
+#define UART_FCR_OFFS          0x00000008 /* FIFO Control Register */
+#define UART_RFCR_OFFS         0x00000008 /* Rcv FIFO Control Register */
+#define UART_TFCR_OFFS         0x00000008 /* Xmit FIFO Control Register */
+#define UART_SCR_OFFS          0x0000000c /* Status Control Register */
+#define UART_LCR_OFFS          0x00000010 /* Line Control Register */
+#define UART_LSR_OFFS          0x00000014 /* Line Status Register */
+#define UART_SSR_OFFS          0x00000018 /* Supplementary Status Register */
+#define UART_MCR_OFFS          0x0000001c /* Modem Control Register */
+#define UART_MSR_OFFS          0x00000020 /* Modem Status Register */
+#define UART_IER_OFFS          0x00000024 /* Interrupt Enable Register */
+#define UART_ISR_OFFS          0x00000028 /* Interrupt Status Register */
+#define UART_EFR_OFFS          0x0000002c /* Enhanced Feature Register */
+#define UART_XON1_OFFS         0x00000030 /* XON1 Character Register */
+#define UART_XON2_OFFS         0x00000034 /* XON2 Character Register */
+#define UART_XOFF1_OFFS        0x00000038 /* XOFF1 Character Register */
+#define UART_XOFF2_OFFS        0x0000003c /* XOFF2 Character Register */
+#define UART_SPR_OFFS          0x00000040 /* Scratch-pad Register */
+#define UART_DIV_115K_OFFS     0x00000044 /* Divisor for baud generation */
+#define UART_DIV_BIT_RATE_OFFS 0x00000048 /* For baud rate generation */
+#define UART_TCR_OFFS          0x0000004c /* Transmission Control Register */
+#define UART_TLR_OFFS          0x00000050 /* Trigger Level Register */
+#define UART_MDR_OFFS          0x00000054 /* Mode Definition Register */
+
+/* Registers available only for the IrDA UART (absolute address). */
+
+#define UART_IRDA_MDR1         0xffff0854 /* Mode Definition Register 1 */
+#define UART_IRDA_MDR2         0xffff0858 /* Mode Definition Register 2 */
+#define UART_IRDA_TXFLL        0xffff085c /* LS Xmit Frame Length Register */
+#define UART_IRDA_TXFLH        0xffff0860 /* MS Xmit Frame Length Register */
+#define UART_IRDA_RXFLL        0xffff0864 /* LS Rcvd Frame Length Register */
+#define UART_IRDA_RXFLH        0xffff0868 /* MS Rcvd Frame Length Register */
+#define UART_IRDA_SFLSR        0xffff086c /* Status FIFO Line Status Reg */
+#define UART_IRDA_SFREGL       0xffff0870 /* LS Status FIFO Register */
+#define UART_IRDA_SFREGH       0xffff0874 /* MS Status FIFO Register */
+#define UART_IRDA_BLR          0xffff0878 /* Begin of File Length Register */
+#define UART_IRDA_PULSE_WIDTH  0xffff087c /* Pulse Width Register */
+#define UART_IRDA_ACREG        0xffff0880 /* Auxiliary Control Register */
+#define UART_IRDA_PULSE_START  0xffff0884 /* Start time of pulse */
+#define UART_IRDA_RX_W_PTR     0xffff0888 /* RX FIFO write pointer */
+#define UART_IRDA_RX_R_PTR     0xffff088c /* RX FIFO read pointer */
+#define UART_IRDA_TX_W_PTR     0xffff0890 /* TX FIFO write pointer */
+#define UART_IRDA_TX_R_PTR     0xffff0894 /* TX FIFO read pointer */
+#define UART_IRDA_STATUS_W_PTR 0xffff0898 /* Write pointer of status FIFO */
+#define UART_IRDA_STATUS_R_PTR 0xffff089c /* Read pointer of status FIFO */
+#define UART_IRDA_RESUME       0xffff08a0 /* Resume register */
+#define UART_IRDA_MUX          0xffff08a4 /* Selects UART_IRDA output mux */
+
+/* Registers available for the Modem UART (absolute addresses) */
+
+#define UART_MODEM_MDR         0xffff1054 /* Mode Definition Register */
+#define UART_MODEM_UASR        0xffff1058 /* UART Auto-baud Status Register */
+#define UART_MODEM_RDPTR_URX   0xffff105c /* RX FIFO Read Pointer Register */
+#define UART_MODEM_WRPTR_URX   0xffff1060 /* RX FIFO Write Pointer Register */
+#define UART_MODEM_RDPTR_UTX   0xffff1064 /* TX FIFO Read Pointer Register */
+#define UART_MODEM_WRPTR_UTX   0xffff1068 /* TX FIFO Write Pointer Register */
+
+/* UART Settings ********************************************/
+
+/* Miscellaneous UART settings. */
+
+#define UART_RX_FIFO_NOEMPTY 0x00000001
+#define UART_SSR_TXFULL      0x00000001
+#define UART_LSR_TREF        0x00000020
+
+#define UART_XMIT_FIFO_SIZE      64
+#define UART_IRDA_XMIT_FIFO_SIZE 64
+
+/* UART_LCR Register */
+                                        /* Bits 31-7: Reserved */
+#define UART_LCR_BOC         0x00000040 /* Bit 6: Break Control */
+                                        /* Bit 5: Parity Type 2 */
+#define UART_LCR_PAREVEN     0x00000010 /* Bit 4: Parity Type 1 */
+#define UART_LCR_PARODD      0x00000000
+#define UART_LCR_PAREN       0x00000008 /* Bit 3: Paity Enable */
+#define UART_LCR_PARDIS      0x00000000
+#define UART_LCR_2STOP       0x00000004 /* Bit 2: Number of stop bits */
+#define UART_LCR_1STOP       0x00000000
+#define UART_LCR_5BITS       0x00000000 /* Bits 0-1: Word-length */
+#define UART_LCR_6BITS       0x00000001
+#define UART_LCR_7BITS       0x00000002
+#define UART_LCR_8BITS       0x00000003
+
+#define UART_FCR_FTL         0x00000000
+#define UART_FCR_FIFO_EN     0x00000001
+#define UART_FCR_TX_CLR      0x00000002
+#define UART_FCR_RX_CLR      0x00000004
+
+#define UART_IER_RECVINT     0x00000001
+#define UART_IER_XMITINT     0x00000002
+#define UART_IER_LINESTSINT  0x00000004
+#define UART_IER_MODEMSTSINT 0x00000008 /* IrDA UART only */
+#define UART_IER_XOFFINT     0x00000020
+#define UART_IER_RTSINT      0x00000040 /* IrDA UART only */
+#define UART_IER_CTSINT      0x00000080 /* IrDA UART only */
+#define UART_IER_INTMASK     0x000000ff
+
+#define BAUD_115200          0x00000001
+#define BAUD_57600           0x00000002
+#define BAUD_38400           0x00000003
+#define BAUD_19200           0x00000006
+#define BAUD_9600            0x0000000C
+#define BAUD_4800            0x00000018
+#define BAUD_2400            0x00000030
+#define BAUD_1200            0x00000060
+
+#define MDR_UART_MODE        0x00000000  /* Both IrDA and Modem UARTs */
+#define MDR_SIR_MODE         0x00000001  /* IrDA UART only */
+#define MDR_AUTOBAUDING_MODE 0x00000002  /* Modem UART only */
+#define MDR_RESET_MODE       0x00000007  /* Both IrDA and Modem UARTs */
+
+/* SPI ******************************************************/
+
+#define MAX_SPI 3
+
+#define SPI_REGISTER_BASE    0xffff2000
+
+/* GIO ******************************************************/
+
+#define MAX_GIO (35)
+
+#define GIO_REGISTER_BASE    0xffff2800
+
+#define GPIO_IO              0xffff2800 /* Writeable when I/O is configured
+					 * as an output; reads value on I/O
+					 * pin when I/O is configured as an
+					 * input */
+#define GPIO_CIO             0xffff2804 /* GPIO configuration register */
+#define GPIO_IRQA            0xffff2808 /* In conjunction with GPIO_IRQB
+					 * determines the behavior when GPIO
+					 * pins configured as input IRQ */
+#define GPIO_IRQB            0xffff280c /* Determines the behavior when GPIO
+					 * pins configured as input IRQ */
+#define GPIO_DDIO            0xffff2810 /* Delta Detect Register
+					 * (detects changes in the I/O pins) */
+#define GPIO_EN              0xffff2814 /* Selects register for muxed GPIOs */
+
+#define KGIO_REGISTER_BASE   0xffff2900
+
+#define KBGPIO_IO            0xffff2900 /* Keyboard I/O bits: Writeable
+					 * when KBGPIO is configured as an
+					 * output; reads value on I/O pin
+					 * when KBGPIO is configured as an
+					 * input */
+#define KBGPIO_CIO           0xffff2904 /* KBGPIO configuration register */
+#define KBGPIO_IRQA          0xffff2908 /* In conjunction with KBGPIO_IRQB
+					 * determines the behavior when
+					 * KBGPIO pins configured as input
+					 * IRQ */
+#define KBGPIO_IRQB          0xffff290c /* In conjunction with KBGPIO_IRQA
+					 * determines the behavior when
+					 * KBGPIO pins configured as input
+					 * IRQ */
+#define KBGPIO_DDIO          0xffff2910 /* Delta Detect Register (detects
+					 * changes in the KBGPIO pins) */
+#define KBGPIO_EN            0xffff2914 /* Selects register for muxed
+					 * KBGPIOs */
+
+/* Timers ***************************************************/
+
+#define C5471_TIMER0_CTRL    0xffff2a00
+#define C5471_TIMER0_CNT     0xffff2a04
+#define C5471_TIMER1_CTRL    0xffff2b00
+#define C5471_TIMER1_CNT     0xffff2b04
+#define C5471_TIMER2_CTRL    0xffff2c00
+
+#define C5471_TIMER2_CNT     0xffff2c04
+
+/* Interrupts */
+
+#define HAVE_SRC_IRQ_BIN_REG 0
+
+#define INT_FIRST_IO         0xffff2d00
+#define INT_IO_RANGE         0x5C
+
+#define IT_REG               0xffff2d00
+#define MASK_IT_REG          0xffff2d04
+#define SRC_IRQ_REG          0xffff2d08
+#define SRC_FIQ_REG          0xffff2d0c
+#define SRC_IRQ_BIN_REG      0xffff2d10
+#define INT_CTRL_REG         0xffff2d18
+
+#define ILR_IRQ0_REG         0xffff2d1C /*  0-Timer 0       */
+#define ILR_IRQ1_REG         0xffff2d20 /*  1-Timer 1       */
+#define ILR_IRQ2_REG         0xffff2d24 /*  2-Timer 2       */
+#define ILR_IRQ3_REG         0xffff2d28 /*  3-GPIO0         */
+#define ILR_IRQ4_REG         0xffff2d2c /*  4-Ethernet      */
+#define ILR_IRQ5_REG         0xffff2d30 /*  5-KBGPIO[7:0]   */
+#define ILR_IRQ6_REG         0xffff2d34 /*  6-Uart   serial */
+#define ILR_IRQ7_REG         0xffff2d38 /*  7-Uart   IRDA   */
+#define ILR_IRQ8_REG         0xffff2d3c /*  8-KBGPIO[15:8]  */
+#define ILR_IRQ9_REG         0xffff2d40 /*  9-GPIO3         */
+#define ILR_IRQ10_REG        0xffff2d44 /* 10-GPIO2         */
+#define ILR_IRQ11_REG        0xffff2d48 /* 11-I2C           */
+#define ILR_IRQ12_REG        0xffff2d4c /* 12-GPIO1         */
+#define ILR_IRQ13_REG        0xffff2d50 /* 13-SPI           */
+#define ILR_IRQ14_REG        0xffff2d54 /* 14-GPIO[19:4]    */
+#define ILR_IRQ15_REG        0xffff2d58 /* 15-API           */
+
+/* I2C ******************************************************/
+
+#define MAX_I2C 1
+
+/* API ******************************************************/
+
+#define DSPRAM_BASE          0xffe00000  /* DSPRAM base address */
+#define DSPRAM_END           0xffe03fff
+
+/* This is the API address range in the DSP address space. */
+
+#define DSPMEM_DSP_START     0x2000
+#define DSPMEM_DSP_END       0x3fff
+
+/* This is the API address range in the ARM address space. */
+
+#define DSPMEM_ARM_START     DSPRAM_BASE /* Defined in hardware.h */
+#define DSPMEM_ARM_END       DSPRAM_END
+
+/* DSPMEM_IN_RANGE is a generic macro to test is a value is within
+ * a range of values.
+ */
+
+#define DSPMEM_IN_RANGE(addr, start, end) \
+  ((((__u32)(addr)) >= (start)) && (((__u32)(addr)) <= (end)))
+
+/* DSPMEM_ADDR_ALIGNED verifies that a potential DSP address is
+ * properly word aligned.
+ */
+
+#define DSPMEM_ADDR_ALIGNED(addr, cpu) ((((__u32)(addr)) & 1) == 0)
+
+/* DSPMEM_DSP_ADDR checks if a DSP address lies in within the
+ * DSP's API address range.
+ */
+
+#define DSPMEM_DSP_ADDR(addr, cpu) \
+  DSPMEM_IN_RANGE(addr, DSPMEM_DSP_START, DSPMEM_DSP_END)
+
+/* DSPMEM_ARM_ADDR checks if a ARM address lies in within the
+ * ARM's API address range.
+ */
+
+#define DSPMEM_ARM_ADDR(addr) \
+  DSPMEM_IN_RANGE(addr, DSPMEM_ARM_START, DSPMEM_ARM_END)
+
+/* DSPMEM_DSP_TO_ARM maps a DSP API address into an ARM API address */
+
+#define DSPMEM_DSP_TO_ARM(addr, cpu) \
+  ((((__u32)(addr) - DSPMEM_DSP_START) << 1) + DSPMEM_ARM_START)
+
+/* DSPMEM_ARM_TO_DSP maps an ARM API address into a DSP API address */
+
+#define DSPMEM_ARM_TO_DSP(addr) \
+  ((((__u32)(addr) - DSPMEM_ARM_START) >> 1) + DSPMEM_DSP_START)
+
+/************************************************************
+ * Inline Functions
+ ************************************************************/
+
+/************************************************************
+ * Public Function Prototypes
+ ************************************************************/
+
+#ifndef __ASSEMBLY__
+extern void c5471_doirq(int irq, uint32* regs);
+#endif
+
+#endif  /* __C5471_CHIP_H */

arch/arm/src/common/arm.h

@@ -0,0 +1,254 @@
+/************************************************************************************
+ * common/arm.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARM_H
+#define __ARM_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+# include <sys/types.h>
+#endif
+
+/**************************************************************************
+ * Conditional Compilation
+ **************************************************************************/
+
+#undef CONFIG_ALIGNMENT_TRAP
+#undef CONFIG_DCACHE_WRITETHROUGH
+#undef CONFIG_CACHE_ROUND_ROBIN
+#undef CONFIG_DCACHE_DISABLE
+#undef CONFIG_ICACHE_DISABLE
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* ARM9EJS **************************************************************************/
+
+/* PSR bits */
+
+#define MODE_MASK       0x0000001f
+#define USR26_MODE      0x00000000
+#define FIQ26_MODE      0x00000001
+#define IRQ26_MODE      0x00000002
+#define SVC26_MODE      0x00000003
+#define USR_MODE        0x00000010
+#define FIQ_MODE        0x00000011
+#define IRQ_MODE        0x00000012
+#define SVC_MODE        0x00000013
+#define ABT_MODE        0x00000017
+#define UND_MODE        0x0000001b
+#define MODE32_BIT      0x00000010
+#define SYSTEM_MODE     0x0000001f
+#define PSR_T_BIT       0x00000020
+#define PSR_F_BIT       0x00000040
+#define PSR_I_BIT       0x00000080
+#define PSR_J_BIT       0x01000000
+#define PSR_Q_BIT       0x08000000
+#define PSR_V_BIT       0x10000000
+#define PSR_C_BIT       0x20000000
+#define PSR_Z_BIT       0x40000000
+#define PSR_N_BIT       0x80000000
+
+/* CR1 bits (CP#15 CR1) */
+
+#define CR_M            0x00000001 /* MMU enable                          */
+#define CR_A            0x00000002 /* Alignment abort enable              */
+#define CR_C            0x00000004 /* Dcache enable                       */
+#define CR_W            0x00000008 /* Write buffer enable                 */
+#define CR_P            0x00000010 /* 32-bit exception handler            */
+#define CR_D            0x00000020 /* 32-bit data address range           */
+#define CR_L            0x00000040 /* Implementation defined              */
+#define CR_B            0x00000080 /* Big endian                          */
+#define CR_S            0x00000100 /* System MMU protection               */
+#define CR_R            0x00000200 /* ROM MMU protection                  */
+#define CR_F            0x00000400 /* Implementation defined              */
+#define CR_Z            0x00000800 /* Implementation defined              */
+#define CR_I            0x00001000 /* Icache enable                       */
+#define CR_V            0x00002000 /* Vectors relocated to 0xffff0000     */
+#define CR_RR           0x00004000 /* Round Robin cache replacement       */
+#define CR_L4           0x00008000 /* LDR pc can set T bit                */
+#define CR_DT           0x00010000
+#define CR_IT           0x00040000
+#define CR_ST           0x00080000
+#define CR_FI           0x00200000 /* Fast interrupt (lower latency mode) */
+#define CR_U            0x00400000 /* Unaligned access operation          */
+#define CR_XP           0x00800000 /* Extended page tables                */
+#define CR_VE           0x01000000 /* Vectored interrupts                 */
+
+/* Hardware page table definitions.
+ *
+ * Level 1 Descriptor (PMD)
+ *
+ * Common definitions.
+ */
+
+#define PMD_TYPE_MASK       0x00000003  /* Bits 1:0:   Type of descriptor */
+#define PMD_TYPE_FAULT      0x00000000
+#define PMD_TYPE_COARSE     0x00000001
+#define PMD_TYPE_SECT       0x00000002
+#define PMD_TYPE_FINE       0x00000003
+                                    /* Bits 3:2:   Depends on descriptor */
+#define PMD_BIT4            0x00000010  /* Bit  4:     Must be one */
+#define PMD_DOMAIN_MASK     0x000001e0  /* Bits 8:5:   Domain control bits */
+#define PMD_DOMAIN(x)       ((x) << 5)
+#define PMD_PROTECTION      0x00000200  /* Bit 9:      v5 only */
+                                    /* Bits 31:10: Depend on descriptor */
+
+/* Level 1 Section Descriptor.  Section descriptors allow fast, single
+ * level mapping between 1Mb address regions.
+ */
+                                        /* Bits 1:0:   Type of mapping */
+#define PMD_SECT_BUFFERABLE 0x00000004  /* Bit  2:     1=bufferable */
+#define PMD_SECT_CACHEABLE  0x00000008  /* Bit  3:     1=cacheable */
+                                        /* Bit  4:     Common, must be one */
+                                        /* Bits 8:5:   Common domain control */
+                                        /* Bit  9:     Common protection */
+#define PMD_SECT_AP_MASK    0x00000c00  /* Bits 11:10: Access permission */
+#define PMD_SECT_AP_WRITE   0x00000400
+#define PMD_SECT_AP_READ    0x00000800
+                                        /* Bits 19:20: Should be zero */
+#define PMD_SECT_TEX_MASK   0xfff00000  /* Bits 31:20: v5, Physical page */
+#define PMD_SECT_APX        0x00008000  /* Bit  15:    v6 only */
+#define PMD_SECT_S          0x00010000  /* Bit  16:    v6 only */
+#define PMD_SECT_nG         0x00020000  /* Bit  17:    v6 only */
+
+#define PMD_SECT_UNCACHED   (0)
+#define PMD_SECT_BUFFERED   (PMD_SECT_BUFFERABLE)
+#define PMD_SECT_WT         (PMD_SECT_CACHEABLE)
+#define PMD_SECT_WB         (PMD_SECT_CACHEABLE|PMD_SECT_BUFFERABLE)
+#define PMD_SECT_MINICACHE  (PMD_SECT_TEX(1)|PMD_SECT_CACHEABLE)
+#define PMD_SECT_WBWA       (PMD_SECT_TEX(1)|PMD_SECT_CACHEABLE|PMD_SECT_BUFFERABLE)
+
+/* Level 1 Coarse Table Descriptor.  Coarse Table Descriptors support
+ * two level mapping between 16Kb memory regions.
+ */
+                                        /* Bits 1:0:   Type of mapping */
+                                        /* Bits 3:2:   Should be zero */
+                                        /* Bit  4:     Common, must be one */
+                                        /* Bits 8:5:   Common domain control */
+                                        /* Bits 9:     Should be zero */
+#define PMD_COARSE_TEX_MASK 0xfffffc00  /* Bits 31:10: v5, Physical page */
+
+/* Level 1 Fine Table Descriptor.  Coarse Table Descriptors support
+ * two level mapping between 4Kb memory regions.
+ */
+
+                                        /* Bits 1:0:   Type of mapping */
+                                        /* Bits 3:2:   Should be zero */
+                                        /* Bit  4:     Common, must be one */
+                                        /* Bits 8:5:   Common domain control */
+                                        /* Bits 11:9:  Should be zero */
+#define PMD_FINE_TEX_MASK   0xfffff000  /* Bits 31:12: v5, Physical page */
+
+/* Level 2 Table Descriptor (PTE).  -- All tables */
+
+#define PTE_TYPE_MASK       (3 << 0)    /* Bits: 1:0:  Type of mapping */
+#define PTE_TYPE_FAULT      (0 << 0)    /*   None */
+#define PTE_TYPE_LARGE      (1 << 0)    /*   64Kb of memory */
+#define PTE_TYPE_SMALL      (2 << 0)    /*    4Kb of memory */
+#define PTE_TYPE_TINY       (3 << 0)    /*    1Kb of memory (v5)*/
+#define PTE_BUFFERABLE      (1 << 2)    /* Bit  2:     1=bufferable */
+#define PTE_CACHEABLE       (1 << 3)    /* Bit  3:     1=cacheable */
+                                        /* Bits 31:4:  Depend on type */
+
+/* Large page -- 64Kb */
+                                         /* Bits: 1:0:  Type of mapping */
+                                         /* Bits: 3:2:  Bufferable/cacheable */
+#define PTE_LARGE_AP_MASK    (0xff << 4) /* Bits 11:4   Access permissions */
+#define PTE_LARGE_AP_UNO_SRO (0x00 << 4)
+#define PTE_LARGE_AP_UNO_SRW (0x55 << 4)
+#define PTE_LARGE_AP_URO_SRW (0xaa << 4)
+#define PTE_LARGE_AP_URW_SRW (0xff << 4)
+                                         /* Bits 15:12: Should be zero */
+#define PTE_LARGE_TEX_MASK   0xffff0000  /* Bits 31:16: v5, Physical page */
+
+/* Small page -- 4Kb */
+
+                                         /* Bits: 1:0:  Type of mapping */
+                                         /* Bits: 3:2:  Bufferable/cacheable */
+#define PTE_SMALL_AP_MASK    (0xff << 4) /* Bits: 11:4: Access permissions */
+#define PTE_SMALL_AP_UNO_SRO (0x00 << 4)
+#define PTE_SMALL_AP_UNO_SRW (0x55 << 4)
+#define PTE_SMALL_AP_URO_SRW (0xaa << 4)
+#define PTE_SMALL_AP_URW_SRW (0xff << 4)
+#define PTE_SMALL_TEX_MASK   0xfffff000  /* Bits: 31:12: Physical page */
+
+/* Tiny page -- 1Kb */
+
+                                        /* Bits: 1:0:  Type of mapping */
+                                        /* Bits: 3:2:  Bufferable/cacheable */
+#define PTE_EXT_AP_MASK      (3 << 4)   /* Bits: 5:4:  Access persions */
+#define PTE_EXT_AP_UNO_SRO   (0 << 4)
+#define PTE_EXT_AP_UNO_SRW   (1 << 4)
+#define PTE_EXT_AP_URO_SRW   (2 << 4)
+#define PTE_EXT_AP_URW_SRW   (3 << 4)
+                                        /* Bits: 9:6:  Should be zero */
+#define PTE_TINY_TEX_MASK    0xfffffc00 /* Bits: 31:10: Physical page */
+
+/* Default MMU flags for memory and IO */
+
+#define MMU_MEMFLAGS \
+  (PMD_TYPE_SECT|PMD_SECT_WB|PMD_BIT4|PMD_SECT_AP_WRITE|PMD_SECT_AP_READ)
+
+#define MMU_IOFLAGS \
+  (PMD_TYPE_SECT|PMD_BIT4|PMD_SECT_AP_WRITE|PMD_SECT_AP_READ)
+
+#define MMU_L1_VECTORFLAGS   (PMD_TYPE_COARSE|PMD_BIT4)
+#define MMU_L2_VECTORFLAGS   (PTE_TYPE_SMALL|PTE_SMALL_AP_UNO_SRW)
+
+/* Mapped section size */
+
+#define SECTION_SIZE          (1 << 20)   /* 1Mb */
+
+/* We place the page tables 16K below the beginning of .text.  The
+ * following value is assume to be the (virtual) start address of
+ * .text.
+ */
+
+#define PGTABLE_SIZE          0x00004000
+
+/************************************************************************************
+ * Inline Functions
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+#endif
+
+#endif  /* __ARM_H */

arch/arm/src/common/up_allocateheap.c

@@ -0,0 +1,79 @@
+/************************************************************
+ * common/up_allocateheap.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+#include "up_arch.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Private Definitions
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Public Functions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_allocate_heap
+ *
+ * Description:
+ *   The heap may be statically allocated by
+ *   defining CONFIG_HEAP_BASE and CONFIG_HEAP_SIZE.  If these
+ *   are not defined, then this function will be called to
+ *   dynamically set aside the heap region.
+ *
+ ************************************************************/
+
+void up_allocate_heap(FAR void **heap_start, size_t *heap_size)
+{
+  up_ledon(LED_HEAPALLOCATE);
+  *heap_start = (FAR void*)g_heapbase;
+  *heap_size = CONFIG_DRAM_END - g_heapbase;
+}

arch/arm/src/common/up_arch.h

@@ -0,0 +1,92 @@
+/************************************************************************************
+ * common/up_arch.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __UP_ARCH_H
+#define __UP_ARCH_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <sys/types.h>
+#endif
+
+#include "arm.h"
+#include <arch/board/board.h>
+#include "chip.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Inline Functions
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+# define getreg8(a)           (*(volatile ubyte *)(a))
+# define putreg8(v,a)         (*(volatile ubyte *)(a) = (v))
+# define getreg32(a)          (*(volatile uint32 *)(a))
+# define putreg32(v,a)        (*(volatile uint32 *)(a) = (v))
+
+/* Some compiler options will convert short loads and stores into byte loads
+ * and stores.  We don't want this to happen for IO reads and writes!
+ */
+
+/* # define getreg16(a)       (*(volatile uint16 *)(a)) */
+static inline uint16 getreg16(unsigned int addr)
+{
+  uint16 retval;
+ __asm__ __volatile__("\tldrh %0, [%1]\n\t" : "=r"(retval) : "r"(addr));
+  return retval;
+}
+
+/* define putreg16(v,a)       (*(volatile uint16 *)(a) = (v)) */
+static inline void putreg16(uint16 val, unsigned int addr)
+{
+ __asm__ __volatile__("\tstrh %0, [%1]\n\t": : "r"(val), "r"(addr));
+}
+
+/* Most DM320 registers are 16-bits wide */
+
+#define getreg(a)   getreg16(1)
+#define putreg(v,a) putreg16(v,a)
+
+#endif
+
+#endif  /* __UP_ARCH_H */

arch/arm/src/common/up_assert.c

@@ -0,0 +1,224 @@
+/************************************************************
+ * common/up_assert.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <stdlib.h>
+#include <assert.h>
+#include <debug.h>
+#include <nuttx/irq.h>
+#include "up_arch.h"
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* Output debug info if stack dump is selected -- even if 
+ * debug is not selected.
+ */
+
+#ifdef CONFIG_ARCH_STACKDUMP
+# undef  lldbg
+# define lldbg lib_lowprintf
+#endif
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_getsp
+ ************************************************************/
+
+/* I don't know if the builtin to get SP is enabled */
+
+static inline uint32 up_getsp(void)
+{
+  uint32 sp;
+  __asm__
+  (
+    "\tmov %0, sp\n\t"
+    : "=r"(sp)
+  );
+  return sp;
+}
+
+/************************************************************
+ * Name: up_stackdump
+ ************************************************************/
+
+#ifdef CONFIG_ARCH_STACKDUMP
+static void up_stackdump(void)
+{
+  _TCB *rtcb        = (_TCB*)g_readytorun.head;
+  uint32 sp         = up_getsp();
+  uint32 stack_base;
+  uint32 stack_size;
+
+  if (rtcb->pid == 0)
+    {
+      stack_base = g_heapbase - 4;
+      stack_size = CONFIG_PROC_STACK_SIZE;
+    }
+  else
+    {
+      stack_base = (uint32)rtcb->adj_stack_ptr;
+      stack_size = (uint32)rtcb->adj_stack_size;
+    }
+
+  lldbg("stack_base: %08x\n", stack_base);
+  lldbg("stack_size: %08x\n", stack_size);
+  lldbg("sp:         %08x\n", sp);
+
+  if (sp >= stack_base || sp < stack_base - stack_size)
+    {
+      lldbg("ERROR: Stack pointer is not within allocated stack\n");
+      return;
+    }
+  else
+    {
+      uint32 stack = sp & ~0x1f;
+
+      for (stack = sp & ~0x1f; stack < stack_base; stack += 32)
+        {
+          uint32 *ptr = (uint32*)stack;
+          lldbg("%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
+                 stack, ptr[0], ptr[1], ptr[2], ptr[3],
+                 ptr[4], ptr[5], ptr[6], ptr[7]);
+        }
+    }
+
+  if (current_regs)
+    {
+      int regs;
+
+      for (regs = REG_R0; regs <= REG_R15; regs += 8)
+        {
+          uint32 *ptr = (uint32*)&current_regs[regs];
+          lldbg("R%d: %08x %08x %08x %08x %08x %08x %08x %08x\n",
+                 regs, ptr[0], ptr[1], ptr[2], ptr[3],
+                 ptr[4], ptr[5], ptr[6], ptr[7]);
+        }
+      lldbg("CPSR: %08x\n", current_regs[REG_CPSR]);
+    }
+}
+#else
+# define up_stackdump()
+#endif
+
+/************************************************************
+ * Name: _up_assert
+ ************************************************************/
+
+static void _up_assert(int errorcode) /* __attribute__ ((noreturn)) */
+{
+  /* Are we in an interrupt handler or the idle task? */
+
+  if (current_regs || ((_TCB*)g_readytorun.head)->pid == 0)
+    {
+       (void)irqsave();
+        for(;;)
+          {
+#ifdef CONFIG_ARCH_LEDS
+            up_ledon(LED_PANIC);
+            up_delay(250);
+            up_ledoff(LED_PANIC);
+            up_delay(250);
+#endif
+          }
+    }
+  else
+    {
+      exit(errorcode);
+    }
+}
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_assert
+ ************************************************************/
+
+void up_assert(const ubyte *filename, int lineno)
+{
+#if CONFIG_TASK_NAME_SIZE > 0
+  _TCB *rtcb = (_TCB*)g_readytorun.head;
+#endif
+
+  up_ledon(LED_ASSERTION);
+#if CONFIG_TASK_NAME_SIZE > 0
+  lldbg("Assertion failed at file:%s line: %d task: %s\n",
+        filename, lineno, rtcb->name);
+#else
+  lldbg("Assertion failed at file:%s line: %d\n",
+        filename, lineno);
+#endif
+  up_stackdump();
+  _up_assert(EXIT_FAILURE);
+}
+
+/************************************************************
+ * Name: up_assert_code
+ ************************************************************/
+
+void up_assert_code(const ubyte *filename, int lineno, int errorcode)
+{
+#if CONFIG_TASK_NAME_SIZE > 0
+  _TCB *rtcb = (_TCB*)g_readytorun.head;
+#endif
+
+  up_ledon(LED_ASSERTION);
+#if CONFIG_TASK_NAME_SIZE > 0
+  lldbg("Assertion failed at file:%s line: %d task: %s error code: %d\n",
+        filename, lineno, rtcb->name, errorcode);
+#else
+  lldbg("Assertion failed at file:%s line: %d error code: %d\n",
+        filename, lineno, errorcode);
+#endif
+  up_stackdump();
+  _up_assert(errorcode);
+}

arch/arm/src/common/up_blocktask.c

@@ -0,0 +1,168 @@
+/************************************************************
+ * common/up_blocktask.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <sched.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Private Definitions
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Funtions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_block_task
+ *
+ * Description:
+ *   The currently executing task at the head of
+ *   the ready to run list must be stopped.  Save its context
+ *   and move it to the inactive list specified by task_state.
+ *
+ * Inputs:
+ *   tcb: Refers to a task in the ready-to-run list (normally
+ *     the task at the the head of the list).  It most be
+ *     stopped, its context saved and moved into one of the
+ *     waiting task lists.  It it was the task at the head
+ *     of the ready-to-run list, then a context to the new
+ *     ready to run task must be performed.
+ *   task_state: Specifies which waiting task list should be
+ *     hold the blocked task TCB.
+ *
+ ************************************************************/
+
+void up_block_task(_TCB *tcb, tstate_t task_state)
+{
+  /* Verify that the context switch can be performed */
+
+  if ((tcb->task_state < FIRST_READY_TO_RUN_STATE) ||
+      (tcb->task_state > LAST_READY_TO_RUN_STATE))
+    {
+      PANIC(OSERR_BADBLOCKSTATE);
+    }
+  else
+    {
+      _TCB *rtcb = (_TCB*)g_readytorun.head;
+      boolean switch_needed;
+
+      lldbg("Blocking TCB=%p\n", tcb);
+
+      /* Remove the tcb task from the ready-to-run list.  If we
+       * are blocking the task at the head of the task list (the
+       * most likely case), then a context switch to the next
+       * ready-to-run task is needed. In this case, it should
+       * also be true that rtcb == tcb.
+       */
+
+      switch_needed = sched_removereadytorun(tcb);
+
+      /* Add the task to the specified blocked task list */
+
+      sched_addblocked(tcb, (tstate_t)task_state);
+
+      /* If there are any pending tasks, then add them to the g_readytorun
+       * task list now
+       */
+
+      if (g_pendingtasks.head)
+        {
+          switch_needed |= sched_mergepending();
+        }
+
+      /* Now, perform the context switch if one is needed */
+
+      if (switch_needed)
+        {
+          /* Are we in an interrupt handler? */
+
+          if (current_regs)
+            {
+              /* Yes, then we have to do things differently.
+               * Just copy the current_regs into the OLD rtcb.
+               */
+
+               up_copystate(rtcb->xcp.regs, current_regs);
+
+              /* Restore the exception context of the rtcb at the (new) head 
+               * of the g_readytorun task list.
+               */
+
+              rtcb = (_TCB*)g_readytorun.head;
+              lldbg("New Active Task TCB=%p\n", rtcb);
+
+              /* Then switch contexts */
+
+              up_copystate(current_regs, rtcb->xcp.regs);
+            }
+
+          /* Copy the user C context into the TCB at the (old) head of the
+           * g_readytorun Task list. if up_saveusercontext returns a non-zero
+           * value, then this is really the previously running task restarting!
+           */
+
+          else if (!up_saveusercontext(rtcb->xcp.regs))
+            {
+              /* Restore the exception context of the rtcb at the (new) head 
+               * of the g_readytorun task list.
+               */
+
+              rtcb = (_TCB*)g_readytorun.head;
+              lldbg("New Active Task TCB=%p\n", rtcb);
+
+              /* Then switch contexts */
+
+              up_fullcontextrestore(rtcb->xcp.regs);
+            }
+        }
+    }
+}

arch/arm/src/common/up_cache.S

@@ -0,0 +1,74 @@
+/********************************************************************
+ * common/up_cache.S
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ********************************************************************/
+
+/********************************************************************
+ * Included Files
+ ********************************************************************/
+
+#include <nuttx/config.h>
+#include "up_internal.h"
+#include "up_arch.h"
+
+/********************************************************************
+ * Definitions
+ ********************************************************************/
+
+#define CACHE_DLINESIZE    32
+
+/********************************************************************
+ * Assembly Macros
+ ********************************************************************/
+
+/**************************************************************************
+ * Name: up_flushicache
+ **************************************************************************/
+
+/* Esure coherency between the Icache and the Dcache in the region described 
+ * by r0=start and r1=end.
+ */
+	.globl	up_flushicache
+	.type	up_flushicache,%function
+up_flushicache:
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		/* Clean D entry */
+	mcr	p15, 0, r0, c7, c5, 1		/* Invalidate I entry */
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		/* Drain WB */
+	mov	pc, lr
+	.size	up_flushicache, .-up_flushicache
+	.end
+

arch/arm/src/common/up_copystate.c

@@ -0,0 +1,75 @@
+/************************************************************
+ * common/up_copystate.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_undefinedinsn
+ ************************************************************/
+
+/* A little faster than most memcpy's */
+
+void up_copystate(uint32 *dest, uint32 *src)
+{
+  int i;
+  for (i = 0; i < XCPTCONTEXT_REGS; i++)
+    {
+      *dest++ = *src++;
+    }
+}
+

arch/arm/src/common/up_createstack.c

@@ -0,0 +1,128 @@
+/************************************************************
+ * common/up_createstack.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <sched.h>
+#include <debug.h>
+#include <nuttx/kmalloc.h>
+#include <nuttx/arch.h>
+#include "up_arch.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Private Types
+ ************************************************************/
+
+/************************************************************
+ * Private Function Prototypes
+ ************************************************************/
+
+/************************************************************
+ * Global Functions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_create_stack
+ *
+ * Description:
+ *   Allocate a stack for a new thread and setup
+ *   up stack-related information in the TCB.
+ *
+ *   The following TCB fields must be initialized:
+ *   adj_stack_size: Stack size after adjustment for hardware,
+ *     processor, etc.  This value is retained only for debug
+ *     purposes.
+ *   stack_alloc_ptr: Pointer to allocated stack
+ *   adj_stack_ptr: Adjusted stack_alloc_ptr for HW.  The
+ *     initial value of the stack pointer.
+ *
+ * Inputs:
+ *   tcb: The TCB of new task
+ *   stack_size:  The requested stack size.  At least this much
+ *     must be allocated.
+ ************************************************************/
+
+STATUS up_create_stack(_TCB *tcb, size_t stack_size)
+{
+  if (tcb->stack_alloc_ptr &&
+      tcb->adj_stack_size != stack_size)
+    {
+      sched_free(tcb->stack_alloc_ptr);
+      tcb->stack_alloc_ptr = NULL;
+    }
+
+   if (!tcb->stack_alloc_ptr)
+     {
+       tcb->stack_alloc_ptr = (uint32 *)kzmalloc(stack_size);
+     }
+
+   if (tcb->stack_alloc_ptr)
+     {
+       size_t top_of_stack;
+       size_t size_of_stack;
+
+       /* The Arm7Tdmi uses a push-down stack:  the stack grows
+	* toward loweraddresses in memory.  The stack pointer
+	* register, points to the lowest, valid work address
+	* (the "top" of the stack).  Items on the stack are
+	* referenced as positive word offsets from sp.
+	*/
+
+       top_of_stack = (uint32)tcb->stack_alloc_ptr + stack_size - 4;
+
+       /* The Arm7Tdmi stack must be aligned at word (4 byte)
+	* boundaries. If necessary top_of_stack must be rounded
+	* down to the next boundary
+	*/
+
+       top_of_stack &= ~3;
+       size_of_stack = top_of_stack - (uint32)tcb->stack_alloc_ptr + 4;
+
+       /* Save the adjusted stack values in the _TCB */
+
+       tcb->adj_stack_ptr  = (uint32*)top_of_stack;
+       tcb->adj_stack_size = size_of_stack;
+
+       up_ledon(LED_STACKCREATED);
+       return OK;
+     }
+
+   return ERROR;
+}

arch/arm/src/common/up_dataabort.c

@@ -0,0 +1,81 @@
+/************************************************************
+ * common/up_dataabort.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <debug.h>
+#include <nuttx/irq.h>
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* Output debug info if stack dump is selected -- even if 
+ * debug is not selected.
+ */
+
+#ifdef CONFIG_ARCH_STACKDUMP
+# undef  lldbg
+# define lldbg lib_lowprintf
+#endif
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_dataabort
+ ************************************************************/
+
+void up_dataabort(uint32 *regs)
+{
+  lldbg("Data abort at 0x%x\n", regs[REG_PC]);
+  current_regs = regs;
+  PANIC(OSERR_ERREXCEPTION);
+}

arch/arm/src/common/up_delay.c

@@ -0,0 +1,100 @@
+/************************************************************
+ * common/up_delay.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <unistd.h>
+#include <semaphore.h>
+#include <string.h>
+#include <errno.h>
+#include <debug.h>
+#include <nuttx/irq.h>
+#include <nuttx/arch.h>
+#include <nuttx/fs.h>
+#include <arch/serial.h>
+#include "up_arch.h"
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/************************************************************
+ * Private Types
+ ************************************************************/
+
+/************************************************************
+ * Private Function Prototypes
+ ************************************************************/
+
+/************************************************************
+ * Private Variables
+ ************************************************************/
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_delay
+ *
+ * Description:
+ *   Delay inline for the requested number of milliseconds.
+ *   NOT multi-tasking friendly.
+ *
+ ************************************************************/
+
+void up_delay(int milliseconds)
+{
+  volatile int i;
+  volatile int j;
+
+  for (i = 0; i < milliseconds; i++)
+    {
+        for (j = 0; j < CONFIG_BOARD_LOOPSPERMSEC; j++)
+          {
+          }
+    }
+}

arch/arm/src/common/up_doirq.c

@@ -0,0 +1,104 @@
+/************************************************************
+ * common/up_doirq.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <nuttx/irq.h>
+#include <nuttx/arch.h>
+#include <assert.h>
+#include "up_arch.h"
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/************************************************************
+ * Public Data
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+void up_doirq(int irq, uint32* regs)
+{
+  up_ledon(LED_INIRQ);
+#ifdef CONFIG_SUPPRESS_INTERRUPTS
+  PANIC(OSERR_ERREXCEPTION);
+#else
+  if ((unsigned)irq < NR_IRQS)
+    {
+       /* Current regs non-zero indicates that we are processing
+        * an interrupt; current_regs is also used to manage
+        * interrupt level context switches.
+        */
+
+       current_regs = regs;
+
+       /* Mask and acknowledge the interrupt */
+
+       up_maskack_irq(irq);
+
+       /* Deliver the IRQ */
+
+       irq_dispatch(irq, regs);
+
+       /* Indicate that we are no long in an interrupt handler */
+
+       current_regs = NULL;
+
+       /* Unmask the last interrupt (global interrupts are still
+        * disabled.
+        */
+
+       up_enable_irq(irq);
+    }
+  up_ledoff(LED_INIRQ);
+#endif
+}

arch/arm/src/common/up_exit.c

@@ -0,0 +1,188 @@
+/************************************************************
+ * common/up_exit.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <sched.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+#include "os_internal.h"
+#include "up_internal.h"
+
+#ifdef CONFIG_DUMP_ON_EXIT
+#include <nuttx/fs.h>
+#endif
+
+/************************************************************
+ * Private Definitions
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: _up_dumponexit
+ *
+ * Description:
+ *   Dump the state of all tasks whenever on task exits.  This
+ *   is debug instrumentation that was added to check file-
+ *   related reference counting but could be useful again
+ *   sometime in the future.
+ *
+ ************************************************************/
+
+#if defined(CONFIG_DUMP_ON_EXIT) && defined(CONFIG_DEBUG)
+static void _up_dumponexit(FAR _TCB *tcb, FAR void *arg)
+{
+  int i;
+  dbg("  TCB=%p name=%s\n", tcb, tcb->argv[0]);
+  if (tcb->filelist)
+    {
+      dbg("    filelist refcount=%d\n",
+          tcb->filelist->fl_crefs);
+
+      for (i = 0; i < CONFIG_NFILE_DESCRIPTORS; i++)
+        {
+          struct inode *inode = tcb->filelist->fl_files[i].f_inode;
+          if (inode)
+            {
+              dbg("      fd=%d refcount=%d\n",
+                  i, inode->i_crefs);
+            }
+        }
+    }
+
+  if (tcb->streams)
+    {
+      dbg("    streamlist refcount=%d\n",
+          tcb->streams->sl_crefs);
+
+      for (i = 0; i < CONFIG_NFILE_STREAMS; i++)
+        {
+          struct file_struct *filep = &tcb->streams->sl_streams[i];
+          if (filep->fs_filedes >= 0)
+            {
+              dbg("      fd=%d nbytes=%d\n",
+                  filep->fs_filedes,
+                  filep->fs_bufpos - filep->fs_bufstart);
+            }
+        }
+    }
+}
+#endif
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: _exit
+ *
+ * Description:
+ *   This function causes the currently executing task to cease
+ *   to exist.  This is a special case of task_delete().
+ *
+ ************************************************************/
+
+void _exit(int status)
+{
+  _TCB* tcb = (_TCB*)g_readytorun.head;
+
+  /* Disable interrupts.  They will be restored when the next
+   * task is started.
+   */
+
+  (void)irqsave();
+
+  lldbg("TCB=%p exitting\n", tcb);
+
+#if defined(CONFIG_DUMP_ON_EXIT) && defined(CONFIG_DEBUG)
+  dbg("Other tasks:\n");
+  sched_foreach(_up_dumponexit, NULL);
+#endif
+
+  /* Remove the tcb task from the ready-to-run list.  We can
+   * ignore the return value because we know that a context
+   * switch is needed.
+   */
+
+  (void)sched_removereadytorun(tcb);
+
+  /* We are not in a bad stack-- the head of the ready to run task list
+   * does not correspond to the thread that is running.  Disabling pre-
+   * emption on this TCB should be enough to keep things stable.
+   */
+
+  sched_lock();
+
+  /* Move the TCB to the specified blocked task list and delete it */
+
+  sched_addblocked(tcb, TSTATE_TASK_INACTIVE);
+  task_delete(tcb->pid);
+
+  /* If there are any pending tasks, then add them to the g_readytorun
+   * task list now
+   */
+
+  if (g_pendingtasks.head)
+    {
+      (void)sched_mergepending();
+    }
+
+  /* Now calling sched_unlock() should have no effect */
+
+  sched_unlock();
+
+  /* Now, perform the context switch to the new ready-to-run task at the
+   * head of the list.
+   */
+
+  tcb = (_TCB*)g_readytorun.head;
+  lldbg("New Active Task TCB=%p\n", tcb);
+
+  /* Then switch contexts */
+
+  up_fullcontextrestore(tcb->xcp.regs);
+}
+

arch/arm/src/common/up_fullcontextrestore.S

@@ -0,0 +1,117 @@
+/**************************************************************************
+ * common/up_fullcontextrestore.S
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **************************************************************************/
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <nuttx/irq.h>
+#include "up_internal.h"
+
+/**************************************************************************
+ * Private Definitions
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Types
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Function Prototypes
+ **************************************************************************/
+
+/**************************************************************************
+ * Global Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Public Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: up_fullcontextrestore
+ **************************************************************************/
+
+	.globl	up_fullcontextrestore
+	.type	up_fullcontextrestore, function
+up_fullcontextrestore:
+
+	/* On entry, a1 (r0) holds address of the register save area */
+
+	/* Recover all registers except for r0, r1, R15, and CPSR */
+
+	add	r1, r0, #(4*REG_R2)	/* Offset to REG_R2 storage */
+	ldmia	r1, {r2-r14}		/* Recover registers */
+
+	/* Create a stack frame to hold the PC */
+
+	sub	sp, sp, #(3*4)		/* Frame for three registers */
+	ldr	r1, [r0, #(4*REG_R0)]	/* Fetch the stored r0 value */
+	str	r1, [sp]		/* Save it at the top of the stack */
+	ldr	r1, [r0, #(4*REG_R1)]	/* Fetch the stored r1 value */
+	str	r1, [sp, #4]		/* Save it in the stack */
+	ldr	r1, [r0, #(4*REG_PC)]	/* Fetch the stored pc value */
+	str	r1, [sp, #8]		/* Save it at the bottom of the frame */
+
+	/* Now we can restore the CPSR.  We wait until we are completely
+	 * finished with the context save data to do this. Restore the CPSR
+	 * may re-enable and interrupts and we couldt be in a context
+	 * where save structure is only protected by interrupts being disabled.
+         */
+
+	ldr	r1, [r0, #(4*REG_CPSR)]	/* Fetch the stored CPSR value */
+	msr	cpsr, r1		/* Set the CPSR */
+
+	/* Now recover r0 and r1 */
+
+	ldr	r0, [sp]
+	ldr	r1, [sp, #4]
+	add	sp, sp, #(2*4)
+
+	/* Then return to the address at the stop of the stack,
+	 * destroying the stack frame
+	 */
+
+	ldr	pc, [sp], #4
+	.size up_fullcontextrestore, . - up_fullcontextrestore
+

arch/arm/src/common/up_head.S

@@ -0,0 +1,324 @@
+/********************************************************************
+ * common/up_head.S
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ********************************************************************/
+
+/********************************************************************
+ * Included Files
+ ********************************************************************/
+
+#include <nuttx/config.h>
+#include "up_internal.h"
+#include "up_arch.h"
+
+/**************************************************************************
+ * Conditional Compilation
+ **************************************************************************/
+
+#undef ALIGNMENT_TRAP
+#undef CPU_DCACHE_WRITETHROUGH
+#undef CPU_CACHE_ROUND_ROBIN
+#undef CPU_DCACHE_DISABLE
+#undef CPU_ICACHE_DISABLE
+
+/********************************************************************
+ * Definitions
+ ********************************************************************/
+
+/* The physical address of the beginning of SDRAM is provided by
+ * CONFIG_DRAM_START.  The size of installed SDRAM is provided by
+ * CONFIG_DRAM_SIZE.  The virtual address of SDRAM is provided by
+ * CONFIG_DRAM_VSTART.
+ */
+
+#define NSDRAM_SECTIONS (CONFIG_DRAM_SIZE >> 20)
+
+/********************************************************************
+ * Assembly Macros
+ ********************************************************************/
+
+/* Since the page table is closely related to the NuttX base
+ * address, we can convert the page table base address to the
+ * base address of the section containing both.
+ */
+
+	.macro	mksection, section, pgtable
+	bic	\section, \pgtable, #0x000ff000
+	.endm
+
+/* This macro will modify r0, r1, r2 and r14 */
+
+#ifdef CONFIG_DEBUG
+	.macro	showprogress, code
+	mov	r0, #\code
+	bl	up_lowputc
+	.endm
+#else
+	.macro	showprogress, code
+	.endm
+#endif
+
+/********************************************************************
+ * Name: __start
+ ********************************************************************/
+
+/* We assume the bootloader has already initialized most of the h/w for
+ * us and that only leaves us having to do some os specific things
+ * below.
+ */
+	.text
+        .global __start
+	.type	__start, #function
+__start:
+	/* Make sure that we are in SVC mode with all IRQs disabled */
+
+	mov	r0, #(SVC_MODE | PSR_I_BIT | PSR_F_BIT)
+	msr	cpsr_c, r0
+
+	/* Clear the 16K level 1 page table */
+
+	ldr	r4, .LCppgtable		/* r4=phys. page table */
+	mov	r0, r4
+	mov	r1, #0
+	add	r2, r0, #PGTABLE_SIZE
+.Lpgtableclear:
+	str	r1, [r0], #4
+	str	r1, [r0], #4
+	str	r1, [r0], #4
+	str	r1, [r0], #4
+	teq	r0, r2
+	bne	.Lpgtableclear
+
+	/* Create identity mapping for first MB section to support
+	 * this startup logic executing out of the physical address
+	 * space.  This identity mapping will be removed by .Lvstart
+	 * (see below).
+	 */
+
+	mksection r0, r4			/* r0=phys. base section */
+	ldr	r1, .LCmmuflags		/* FLGS=MMU_MEMFLAGS */
+	add	r3, r1, r0		/* r3=flags + base */
+	str	r3, [r4, r0, lsr #18]	/* identity mapping */
+
+	/* Create a "normal" single section mapping for the first
+	 * MB of memory.  Now, we have the first 1MB mapping to
+	 * both phyical and virtual addresses.  The reset of the
+	 * SDRAM mapping will be completed in .Lvstart once we have
+	 * moved the physical mapping out of the way.
+	 */
+
+	ldr	r2, .LCvpgtable		/* r2=virt. page table */
+	mksection r0, r2			/* r0=virt. base section */
+	str	r3, [r4, r0, lsr #18]	/* identity mapping */
+
+	/* The following logic will set up the ARM926 for normal operation */
+
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7		/* Invalidate I,D caches */
+	mcr	p15, 0, r0, c7, c10, 4	/* Drain write buffer */
+	mcr	p15, 0, r0, c8, c7		/* Invalidate I,D TLBs */
+	mcr	p15, 0, r4, c2, c0		/* Load page table pointer */
+
+#ifdef CPU_DCACHE_WRITETHROUGH
+	mov	r0, #4			/* Disable write-back on caches explicitly */
+	mcr	p15, 7, r0, c15, c0, 0
+#endif 
+
+	/* Enable the MMU and caches
+	 * lr = Resume at .Lvstart with the MMU enabled
+	 */
+
+	ldr	lr, .LCvstart			/* Abs. virtual address */
+
+	mov	r0, #0x1f			/* Domains 0, 1 = client */
+	mcr	p15, 0, r0, c3, c0		/* Load domain access register */
+	mrc	p15, 0, r0, c1, c0		/* Get control register */
+	
+	/* Clear bits (see start.h) */
+
+	bic	r0, r0, #(CR_R|CR_F|CR_Z)
+	bic	r0, r0, #(CR_A|CR_C|CR_W)
+	bic	r0, r0, #(CR_I)
+
+	/* Set bits (see start.h) */
+
+	orr	r0, r0, #(CR_M|CR_P|CR_D)
+	orr	r0, r0, #(CR_S|CR_V)
+
+#ifdef CPU_CACHE_ROUND_ROBIN
+	orr	r0, r0, #(CR_RR)
+#endif
+#ifndef CPU_DCACHE_DISABLE
+	orr	r0, r0, #(CR_C)
+#endif
+#ifndef CPU_ICACHE_DISABLE
+	orr	r0, r0, #(CR_I)
+#endif
+#ifdef ALIGNMENT_TRAP
+	orr	r0, r0, #(CR_A)
+#endif
+	mcr	p15, 0, r0, c1, c0, 0		/* write control reg */
+
+	/* Get TMP=2 Processor ID register */
+
+	mrc	p15, 0, r1, c0, c0, 0		/* read id reg */
+	mov	r1, r1
+	mov	r1, r1
+
+	mov	pc, lr
+
+/**************************************************************************
+ * PC_Relative Data
+ **************************************************************************/
+
+	/* These addresses are all virtual address */
+	
+	.type	.LCvstart, %object
+.LCvstart:
+	.long	.Lvstart
+	.type	.LCmmuflags, %object
+.LCmmuflags:
+	.long	MMU_MEMFLAGS
+	.type	.LCppagetable, %object
+.LCppgtable:
+	.long	CONFIG_DRAM_START  /* Physical start of DRAM */
+	.type	.LCvpagetable, %object
+.LCvpgtable:
+	.long	CONFIG_DRAM_VSTART /* Virtual start of DRAM */
+	.size	_start, .-_start
+
+/**************************************************************************
+ * Name: .Lvstart
+ **************************************************************************/
+
+/* The following is executed after the MMU has been enabled. This uses
+ * absolute addresses; this is not position independent.
+ */
+	.align	5
+	.local	.Lvstart
+	.type	.Lvstart, %function
+.Lvstart:
+
+	/* Remove the temporary null mapping */
+
+	ldr	r4, .LCvpgtable		/* r4=virtual page table */
+	ldr	r1, .LCppgtable		/* r1=phys. page table */
+	mksection r3, r1			/* r2=phys. base addr */
+	mov	r0, #0			/* flags + base = 0 */
+	str	r0, [r4, r3, lsr #18]	/* Undo identity mapping */
+
+	/* Now setup the pagetables for our normal SDRAM mappings
+	 * mapped region.  We round NUTTX_START_VADDR down to the
+	 * nearest megabyte boundary.
+	 */
+
+	ldr	r1, .LCmmuflags		/* FLGS=MMU_MEMFLAGS */
+	add	r3, r3, r1		/* r3=flags + base */
+
+	add	r0, r4, #(NUTTX_START_VADDR & 0xff000000) >> 18
+	bic	r2, r3, #0x00f00000
+	str	r2, [r0]
+
+	add	r0, r0, #(NUTTX_START_VADDR & 0x00f00000) >> 18
+	str	r3, [r0], #4
+
+	/* Now map the remaining NSDRAM_SECTIONS-1 SDRAM sections */
+
+	.rept	NSDRAM_SECTIONS-1
+	add	r3, r3, #SECTION_SIZE
+	str	r3, [r0], #4
+	.endr
+
+	/* Zero BSS and set up the stack pointer */
+
+	adr	r0, .Linitparms
+	ldmia	r0, {r0, r1, sp}
+
+	/* Clear the frame pointer and .bss */
+
+	mov     fp, #0
+
+.Lbssinit:	
+	cmp     r0, r1		       /* Clear up to _bss_end_ */
+	strcc	fp, [r0],#4
+	bcc	.Lbssinit
+
+	/* Perform early C-level initialization */
+
+	bl	up_boot
+
+	/* Set up the LEDs */
+
+#ifdef CONFIG_ARCH_LEDS
+	bl	up_ledinit
+#endif
+	/* Perform early serial initialization */
+
+#ifdef CONFIG_DEV_CONSOLE
+	bl      up_earlyserialinit
+#endif
+
+	/* Finally branch to the OS entry point */
+
+	mov	lr, #0
+	b	os_start
+
+	/* Variables:
+	 * _sbss is the start of the BSS region (see ld.script)
+	 * _ebss is the end of the BSS regsion (see ld.script)
+	 * The idle task stack starts at the end of BSS and is
+	 * of size CONFIG_PROC_STACK_SIZE.  The heap continues
+	 * from there until the end of memory.  See g_heapbase
+	 * below.
+	 */
+
+.Linitparms:
+	.long	_sbss
+	.long	_ebss
+	.long	_ebss+CONFIG_PROC_STACK_SIZE-4
+	.size	.Lvstart, .-.Lvstart
+
+	/* This global variable is unsigned long g_heapbase and is
+	 * exported from here only because of its coupling to .Linitparms
+	 * above.
+	 */
+
+	.data
+	.align	4
+	.globl	g_heapbase
+	.type	g_heapbase, object
+g_heapbase:
+	.long	_ebss+CONFIG_PROC_STACK_SIZE
+	.size	g_heapbase, .-g_heapbase
+	.end
+

arch/arm/src/common/up_idle.c

@@ -0,0 +1,87 @@
+/************************************************************
+ * common/up_idle.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <nuttx/arch.h>
+#include "up_internal.h"
+
+/************************************************************
+ * Private Definitions
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Funtions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_idle
+ *
+ * Description:
+ *   up_idle() is the logic that will be executed when their
+ *   is no other ready-to-run task.  This is processor idle
+ *   time and will continue until some interrupt occurs to
+ *   cause a context switch from the idle task.
+ *
+ *   Processing in this state may be processor-specific. e.g.,
+ *   this is where power management operations might be
+ *   performed.
+ *
+ ************************************************************/
+
+void up_idle(void)
+{
+#if defined(CONFIG_SUPPRESS_INTERRUPTS) || defined(CONFIG_SUPPRESS_TIMER_INTS)
+  /* If the system is idle and there are no timer interrupts,
+   * then process "fake" timer interrupts. Hopefully, something
+   * will wake up.
+   */
+
+  sched_process_timer();
+#endif
+}
+

arch/arm/src/common/up_initialize.c

@@ -0,0 +1,104 @@
+/************************************************************
+ * common/up_initialize.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+#include <nuttx/fs.h>
+#include "up_arch.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Private Types
+ ************************************************************/
+
+/************************************************************
+ * Private Function Prototypes
+ ************************************************************/
+
+/************************************************************
+ * Global Functions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_initialize
+ *
+ * Description:
+ *   up_initialize will be called once during OS
+ *   initialization after the basic OS services have been
+ *   initialized.  The architecture specific details of
+ *   initializing the OS will be handled here.  Such things as
+ *   setting up interrupt service routines, starting the
+ *   clock, and registering device drivers are some of the
+ *   things that are different for each processor and hardware
+ *   platform.
+ *
+ *   up_initialize is called after the OS initialized but
+ *   before the init process has been started and before the
+ *   libraries have been initialized.  OS services and driver
+ *   services are available.
+ *
+ ************************************************************/
+
+void up_initialize(void)
+{
+  /* Initialize global variables */
+
+  current_regs = NULL;
+
+  /* Initialize the interrupt subsystem */
+
+  up_irqinitialize();
+
+  /* Initialize the system timer interrupt */
+
+#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
+  up_timerinit();
+#endif
+
+  /* Register devices */
+
+  devnull_register();   /* Standard /dev/null */
+
+  /* Initialize the serial device driver */
+
+  up_serialinit();
+  up_ledon(LED_IRQSENABLED);
+}

arch/arm/src/common/up_initialstate.c

@@ -0,0 +1,91 @@
+/************************************************************
+ * common/up_initialstate.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <string.h>
+#include <nuttx/arch.h>
+#include "up_internal.h"
+#include "up_arch.h"
+
+/************************************************************
+ * Private Definitions
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Funtions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_initial_state
+ *
+ * Description:
+ *   A new thread is being started and a new TCB
+ *   has been created. This function is called to initialize
+ *   the processor specific portions of the new TCB.
+ *
+ *   This function must setup the intial architecture registers
+ *   and/or  stack so that execution will begin at tcb->start
+ *   on the next context switch.
+ *
+ ************************************************************/
+
+void up_initial_state(_TCB *tcb)
+{
+  struct xcptcontext *xcp = &tcb->xcp;
+
+  /* Initialize the initial exception register context structure */
+
+  memset(xcp, 0, sizeof(struct xcptcontext));
+  xcp->regs[REG_SP]   = (uint32)tcb->adj_stack_ptr;
+  xcp->regs[REG_PC]   = (uint32)tcb->start;
+#ifdef CONFIG_SUPPRESS_INTERRUPTS
+  xcp->regs[REG_CPSR] = SVC_MODE | PSR_I_BIT | PSR_F_BIT;
+#else
+  xcp->regs[REG_CPSR] = SVC_MODE | PSR_F_BIT;
+#endif
+}

arch/arm/src/common/up_internal.h

@@ -0,0 +1,161 @@
+/************************************************************
+ * common/up_internal.h
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+#ifndef __UP_INTERNAL_H
+#define __UP_INTERNAL_H
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* Bring-up debug configurations.  These are here (vs defconfig)
+ * because these should only be controlled during low level
+ * board bring-up and not part of normal platform configuration.
+ */
+
+#undef  CONFIG_SUPPRESS_INTERRUPTS    /* Do not enable interrupts */
+#undef  CONFIG_SUPPRESS_TIMER_INTS    /* No timer */
+#undef  CONFIG_SUPPRESS_SERIAL_INTS   /* Console will poll */
+#undef  CONFIG_SUPPRESS_UART_CONFIG   /* Do not reconfig UART */
+#define CONFIG_DUMP_ON_EXIT         1 /* Dump task state on exit */
+
+/************************************************************
+ * Public Types
+ ************************************************************/
+
+#ifndef __ASSEMBLY__
+typedef void (*up_vector_t)(void);
+#endif
+
+/************************************************************
+ * Public Variables
+ ************************************************************/
+
+#ifndef __ASSEMBLY__
+/* This holds a references to the current interrupt level
+ * register storage structure.  If is non-NULL only during
+ * interrupt processing.
+ */
+
+extern uint32 *current_regs;
+
+/* This is the beginning of heap as provided from up_head.S.
+ * This is the first address in DRAM after the loaded
+ * program+bss+idle stack.  The end of the heap is
+ * CONFIG_DRAM_END
+ */
+
+extern uint32 g_heapbase;
+#endif
+
+/************************************************************
+ * Inline Functions
+ ************************************************************/
+
+
+/************************************************************
+ * Public Functions
+ ************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/* Defined in files with the same name as the function */
+
+extern void up_boot(void);
+extern void up_copystate(uint32 *dest, uint32 *src);
+extern void up_dataabort(uint32 *regs);
+extern void up_delay(int milliseconds);
+extern void up_doirq(uint32 *regs);
+extern void up_fullcontextrestore(uint32 *regs) __attribute__ ((noreturn));
+extern void up_irqinitialize(void);
+extern void up_prefetchabort(uint32 *regs);
+extern int  up_saveusercontext(uint32 *regs);
+extern void up_sigdeliver(void);
+extern void up_syscall(uint32 *regs);
+extern int  up_timerisr(int irq, uint32 *regs);
+extern void up_undefinedinsn(uint32 *regs);
+
+#ifdef CONFIG_DEBUG
+extern void up_lowputc(char ch);
+#else
+# define up_lowputc(ch)
+#endif
+
+/* Defined in up_vectors.S */
+
+extern void up_vectorundefinsn(void);
+extern void up_vectorswi(void);
+extern void up_vectorprefetch(void);
+extern void up_vectordata(void);
+extern void up_vectoraddrexcptn(void);
+extern void up_vectorirq(void);
+extern void up_vectorfiq(void);
+
+/* Defined in up_serial.c */
+
+extern void up_earlyserialinit(void);
+extern void up_serialinit(void);
+
+/* Defined in up_watchdog.c */
+
+extern void up_wdtinit(void);
+
+/* Defined in up_timerisr.c */
+
+extern void up_timerinit(void);
+
+/* Defined in up_irq.c */
+
+extern void up_maskack_irq(int irq);
+
+/* Defined in board/up_leds.c */
+
+#ifdef CONFIG_ARCH_LEDS
+extern void up_ledinit(void);
+extern void up_ledon(int led);
+extern void up_ledoff(int led);
+#else
+# define up_ledinit()
+# define up_ledon(led)
+# define up_ledoff(led)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif  /* __UP_INTERNAL_H */

arch/arm/src/common/up_interruptcontext.c

@@ -0,0 +1,68 @@
+/************************************************************
+ * common/up_interruptcontext.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <nuttx/arch.h>
+#include <nuttx/irq.h>
+#include "up_internal.h"
+
+/************************************************************
+ * Private Types
+ ************************************************************/
+
+/************************************************************
+ * Private Function Prototypes
+ ************************************************************/
+
+/************************************************************
+ * Global Functions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_interrupt_context
+ *
+ * Description: Return TRUE is we are currently executing in
+ * the interrupt handler context.
+ ************************************************************/
+
+boolean up_interrupt_context(void)
+{
+   return current_regs != NULL;
+}

arch/arm/src/common/up_nommuhead.S

@@ -0,0 +1,162 @@
+/********************************************************************
+ * common/up_nommuhead.S
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ********************************************************************/
+
+/********************************************************************
+ * Included Files
+ ********************************************************************/
+
+#include <nuttx/config.h>
+#include "up_internal.h"
+#include "up_arch.h"
+
+/********************************************************************
+ * Macros
+ ********************************************************************/
+
+	/* This macro will modify r0, r1, r2 and r14 */
+
+#ifdef CONFIG_DEBUG
+	.macro	showprogress, code
+	mov	r0, #\code
+	bl	up_lowputc
+	.endm
+#else
+	.macro	showprogress, code
+	.endm
+#endif
+
+/********************************************************************
+ * OS Entry Point
+ ********************************************************************/
+
+/* We assume the bootloader has already initialized most of the h/w for
+ * us and that only leaves us having to do some os specific things
+ * below.
+ */
+	.text
+        .global __start
+	.type	__start, #function
+__start:
+
+	/* First, setup initial processor mode */
+
+	mov	r0, #(SVC_MODE | PSR_I_BIT | PSR_F_BIT )
+	msr	cpsr, r0
+
+	showprogress 'A'
+
+	/* Setup system stack (and get the BSS range) */
+
+	adr	r0, LC0
+	ldmia   r0, {r4, r5, sp}
+
+	/* Clear system BSS section */
+
+	mov	r0, #0
+1:	cmp	r4, r5
+	strcc	r0, [r4], #4
+	bcc	1b
+
+	showprogress 'B'
+
+	/* Copy system .data sections to new home in RAM. */
+
+#ifdef CONFIG_BOOT_FROM_FLASH
+
+	adr	r3, LC2
+	ldmia	r3, {r0, r1, r2}
+
+1:	ldmia	r0!, {r3 - r10}
+	stmia	r1!, {r3 - r10}
+	cmp	r1, r2
+	blt	1b
+
+#endif
+	/* Perform early serial initialization */
+
+	mov	fp, #0
+	bl	up_earlyserialinit
+
+#ifdef CONFIG_DEBUG
+	mov	r0, #'C'
+	bl	up_putc
+	mov	r0, #'\n'
+	bl	up_putc
+#endif
+	/* Initialize onboard LEDs */
+
+#ifdef CONFIG_ARCH_LEDS
+	bl	up_ledinit
+#endif
+
+	/* Then jump to OS entry */
+
+	b	os_start
+
+	/* Variables:
+	 * _sbss is the start of the BSS region (see ld.script)
+	 * _ebss is the end of the BSS regsion (see ld.script)
+	 * The idle task stack starts at the end of BSS and is
+	 * of size CONFIG_PROC_STACK_SIZE.  The heap continues
+	 * from there until the end of memory.  See g_heapbase
+	 * below.
+	 */
+
+LC0:	.long	_sbss
+	.long	_ebss
+	.long	_ebss+CONFIG_PROC_STACK_SIZE-4
+
+#ifdef CONFIG_BOOT_FROM_FLASH
+LC2:	.long	_eronly	/* Where .data defaults are stored in FLASH */
+	.long	_sdata	/* Where .data needs to reside in SDRAM */
+	.long	_edata
+#endif
+	.size	__start, .-__start
+
+	/* This global variable is unsigned long g_heapbase and is
+	 * exported from here only because of its coupling to LCO
+	 * above.
+	 */
+
+	.data
+	.align	4
+	.globl	g_heapbase
+	.type	g_heapbase, object
+g_heapbase:
+	.long	_ebss+CONFIG_PROC_STACK_SIZE
+	.size	g_heapbase, .-g_heapbase
+
+	.end
+

arch/arm/src/common/up_prefetchabort.c

@@ -0,0 +1,81 @@
+/************************************************************
+ * common/up_prefetchabort.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <debug.h>
+#include <nuttx/irq.h>
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Definitions
+ ************************************************************/
+
+/* Output debug info if stack dump is selected -- even if 
+ * debug is not selected.
+ */
+
+#ifdef CONFIG_ARCH_STACKDUMP
+# undef  lldbg
+# define lldbg lib_lowprintf
+#endif
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Functions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_prefetchabort
+ ************************************************************/
+
+void up_prefetchabort(uint32 *regs)
+{
+  lldbg("Prefetch abort at 0x%x\n", regs[REG_PC]);
+  current_regs = regs;
+  PANIC(OSERR_ERREXCEPTION);
+}

arch/arm/src/common/up_releasepending.c

@@ -0,0 +1,131 @@
+/************************************************************
+ * common/up_releasepending.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <sched.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Private Definitions
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Funtions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_release_pending
+ *
+ * Description:
+ *   Release and ready-to-run tasks that have
+ *   collected in the pending task list.  This can call a
+ *   context switch if a new task is placed at the head of
+ *   the ready to run list.
+ *
+ ************************************************************/
+
+void up_release_pending(void)
+{
+  _TCB *rtcb = (_TCB*)g_readytorun.head;
+
+  lldbg("From TCB=%p\n", rtcb);
+
+  /* Merge the g_pendingtasks list into the g_readytorun task list */
+
+  /* sched_lock(); */
+  if (sched_mergepending())
+    {
+      /* The currently active task has changed!  We will need to
+       * switch contexts.  First check if we are operating in
+       * interrupt context:
+       */
+
+      if (current_regs)
+        {
+          /* Yes, then we have to do things differently.
+           * Just copy the current_regs into the OLD rtcb.
+           */
+
+           up_copystate(rtcb->xcp.regs, current_regs);
+
+          /* Restore the exception context of the rtcb at the (new) head 
+           * of the g_readytorun task list.
+           */
+
+          rtcb = (_TCB*)g_readytorun.head;
+          lldbg("New Active Task TCB=%p\n", rtcb);
+
+          /* Then switch contexts */
+
+          up_copystate(current_regs, rtcb->xcp.regs);
+        }
+
+      /* Copy the exception context into the TCB of the task that
+       * was currently active. if up_saveusercontext returns a non-zero
+       * value, then this is really the previously running task 
+       * restarting!
+       */
+
+      else if (!up_saveusercontext(rtcb->xcp.regs))
+        {
+          /* Restore the exception context of the rtcb at the (new) head 
+           * of the g_readytorun task list.
+           */
+
+          rtcb = (_TCB*)g_readytorun.head;
+          lldbg("New Active Task TCB=%p\n", rtcb);
+
+           /* Then switch contexts */
+
+          up_fullcontextrestore(rtcb->xcp.regs);
+        }
+    }
+}

arch/arm/src/common/up_releasestack.c

@@ -0,0 +1,78 @@
+/************************************************************
+ * common/up_releasestack.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <sched.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Private Types
+ ************************************************************/
+
+/************************************************************
+ * Private Function Prototypes
+ ************************************************************/
+
+/************************************************************
+ * Global Functions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_release_stack
+ *
+ * Description:
+ *   A task has been stopped. Free all stack
+ *   related resources retained int the defunct TCB.
+ *
+ ************************************************************/
+
+void up_release_stack(_TCB *dtcb)
+{
+  if (dtcb->stack_alloc_ptr)
+    {
+      sched_free(dtcb->stack_alloc_ptr);
+      dtcb->stack_alloc_ptr = NULL;
+    }
+
+  dtcb->adj_stack_size = 0;
+}

arch/arm/src/common/up_reprioritizertr.c

@@ -0,0 +1,179 @@
+/************************************************************
+ * common/up_reprioritizertr.c
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************/
+
+/************************************************************
+ * Included Files
+ ************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <sched.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+#include "os_internal.h"
+#include "up_internal.h"
+
+/************************************************************
+ * Private Definitions
+ ************************************************************/
+
+/************************************************************
+ * Private Data
+ ************************************************************/
+
+/************************************************************
+ * Private Funtions
+ ************************************************************/
+
+/************************************************************
+ * Public Funtions
+ ************************************************************/
+
+/************************************************************
+ * Name: up_reprioritize_rtr
+ *
+ * Description:
+ *   Called when the priority of a running or
+ *   ready-to-run task changes and the reprioritization will 
+ *   cause a context switch.  Two cases:
+ *
+ *   1) The priority of the currently running task drops and the next
+ *      task in the ready to run list has priority.
+ *   2) An idle, ready to run task's priority has been raised above the
+ *      the priority of the current, running task and it now has the
+ *      priority.
+ *
+ * Inputs:
+ *   tcb: The TCB of the task that has been reprioritized
+ *   priority: The new task priority
+ *
+ ************************************************************/
+
+void up_reprioritize_rtr(_TCB *tcb, ubyte priority)
+{
+  /* Verify that the caller is sane */
+
+  if (tcb->task_state < FIRST_READY_TO_RUN_STATE ||
+      tcb->task_state > LAST_READY_TO_RUN_STATE ||
+      priority < SCHED_PRIORITY_MIN || 
+      priority > SCHED_PRIORITY_MAX)
+    {
+       PANIC(OSERR_BADREPRIORITIZESTATE);
+    }
+  else
+    {
+      _TCB *rtcb = (_TCB*)g_readytorun.head;
+      boolean switch_needed;
+
+      lldbg("TCB=%p PRI=%d\n", tcb, priority);
+
+      /* Remove the tcb task from the ready-to-run list.
+       * sched_removereadytorun will return TRUE if we just
+       * remove the head of the ready to run list.
+       */
+
+      switch_needed = sched_removereadytorun(tcb);
+
+      /* Setup up the new task priority */
+
+      tcb->sched_priority = (ubyte)priority;
+
+      /* Return the task to the specified blocked task list.
+       * sched_addreadytorun will return TRUE if the task was
+       * added to the new list.  We will need to perform a context
+       * switch only if the EXCLUSIVE or of the two calls is non-zero
+       * (i.e., one and only one the calls changes the head of the
+       * ready-to-run list).
+       */
+
+      switch_needed ^= sched_addreadytorun(tcb);
+
+      /* Now, perform the context switch if one is needed */
+
+      if (switch_needed)
+        {
+          /* If we are going to do a context switch, then now is the right
+           * time to add any pending tasks back into the ready-to-run list.
+           * task list now
+           */
+
+          if (g_pendingtasks.head)
+            {
+              sched_mergepending();
+            }
+
+         /* Are we in an interrupt handler? */
+
+          if (current_regs)
+            {
+              /* Yes, then we have to do things differently.
+               * Just copy the current_regs into the OLD rtcb.
+               */
+
+               up_copystate(rtcb->xcp.regs, current_regs);
+
+              /* Restore the exception context of the rtcb at the (new) head 
+               * of the g_readytorun task list.
+               */
+
+              rtcb = (_TCB*)g_readytorun.head;
+              lldbg("New Active Task TCB=%p\n", rtcb);
+
+              /* Then switch contexts */
+
+              up_copystate(current_regs, rtcb->xcp.regs);
+            }
+
+          /* Copy the exception context into the TCB at the (old) head of the
+           * g_readytorun Task list. if up_saveusercontext returns a non-zero
+           * value, then this is really the previously running task restarting!
+           */
+
+          else if (!up_saveusercontext(rtcb->xcp.regs))
+            {
+              /* Restore the exception context of the rtcb at the (new) head 
+               * of the g_readytorun task list.
+               */
+
+              rtcb = (_TCB*)g_readytorun.head;
+              lldbg("New Active Task TCB=%p\n", rtcb);
+
+              /* Then switch contexts */
+
+              up_fullcontextrestore(rtcb->xcp.regs);
+            }
+        }
+    }
+}

arch/arm/src/common/up_saveusercontext.S

@@ -0,0 +1,119 @@
+/**************************************************************************
+ * common/up_saveusercontext.S
+ *
+ *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name Gregory Nutt nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **************************************************************************/
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <nuttx/irq.h>
+#include "up_internal.h"
+
+/**************************************************************************
+ * Private Definitions
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Types
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Function Prototypes
+ **************************************************************************/
+
+/**************************************************************************
+ * Global Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Public Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: up_saveusercontext
+ **************************************************************************/
+
+	.text
+	.globl	up_saveusercontext
+	.type	up_saveusercontext, function
+up_saveusercontext:
+	/* On entry, a1 (r0) holds address of struct xcptcontext.
+	 * Offset to the user region.
+	 */
+
+	/* Make sure that the return value will be non-zero (the
+	 * value of the other volatile registers don't matter --
+	 * r1-r3, ip).  This function is called throught the
+	 * noraml C calling conventions and the values of these
+	 * registers cannot be assumed at the point of setjmp
+	 * return.
+	 */
+
+        mov	ip, #1
+	str	ip, [r0, #(4*REG_R0)]
+
+	/* Save the volatile registers (plus r12 which really
+	 * doesn't need to be saved)
+	 */
+
+	add	r1, r0, #(4*REG_R4)
+	stmia	r1, {r4-r14}
+
+	/* Save the current cpsr */
+
+	mrs	r2, cpsr		/* R3 = CPSR value */
+	add	r1, r0, #(4*REG_CPSR)
+	str	r2, [r1]
+
+	/* Finally save the return address as the PC so that we
+	 * return to the exit from this function.
+	 */
+
+        add	r1, r0, #(4*REG_PC)
+	str	lr, [r1]
+
+	/* Return 0 */
+
+	mov	r0, #0		/* Return value == 0 */
+	mov	pc, lr		/* Return */
+	.size	up_saveusercontext, . - up_saveusercontext
+