 Gregory Nutt
|
dfdc2c4e31
|
lpcxpresso-lpc1768: Refreshed all configurations
|
2014-04-19 08:51:55 -06:00 |
|
|
Gregory Nutt
|
6a3a766b00
|
LPC17xx: Prioritized interrupts are not supported (although hooks are present to prioritize interrupts). Make LPC17 Ethernet default priority to be the system default, not the highest. If the unsupported feature is enabled, then at least it should do no harm
|
2014-04-19 07:56:59 -06:00 |
|
|
Gregory Nutt
|
4e72f42468
|
LPC17xx, TIVA, and Kinetis interrupt initialization: use the NVIC ICTR register to determine how many interrupt lines/registers are supported by the MCU
|
2014-04-17 14:51:53 -06:00 |
|
|
Gregory Nutt
|
9485fbf66e
|
SAM3/4 Interrupt initialization. Default interrupt priority not being set correctly
|
2014-04-17 14:02:22 -06:00 |
|
|
Gregory Nutt
|
b83702dd8a
|
HID mouse: Don't include NAKs in error count. From Leo
|
2014-04-17 11:47:00 -06:00 |
|
|
Gregory Nutt
|
6d0863b657
|
Add logic to register HID keybaord and mouse classes; fix some conditional compilation. From Leo
|
2014-04-17 11:22:46 -06:00 |
|
|
Gregory Nutt
|
75e61f4b69
|
STM32 OTGFS Host: Changes from Leo for low-speed devices and interrupt endpoints
|
2014-04-17 10:52:27 -06:00 |
|
|
Gregory Nutt
|
2f3fa3cbdc
|
SAMA5 board.h files use type xcpt_t and so must include nuttx/irq.h for type xcpt_t
|
2014-04-17 10:01:15 -06:00 |
|
|
Gregory Nutt
|
c6d70e29bc
|
SAMA5 EMAC: Missing right parens from last change. Noted by Luciano Neri
|
2014-04-17 09:02:55 -06:00 |
|
|
Gregory Nutt
|
3133ebfcee
|
Move the un-definitions of __ramfuncs__ from the sam_clockconfig.c to the common up_internal.h header file so that the attribute will be applied the same to function definitions and prototypes.
|
2014-04-17 08:56:20 -06:00 |
|
|
Gregory Nutt
|
80cded4e3e
|
STM32 F2: Fix SPI2 MOSI pin mapping. From dlsitzer
|
2014-04-16 12:35:33 -06:00 |
|
|
Gregory Nutt
|
f58767ce79
|
MIO183QT-9A LCD driver updated to support reading from the LCD. From Toby Duckwork
|
2014-04-16 12:17:35 -06:00 |
|
|
Gregory Nutt
|
dc3ef08a66
|
SAMA5 TWI: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals
|
2014-04-16 12:09:55 -06:00 |
|
|
Gregory Nutt
|
bf2bb55aac
|
SAMA5 SSC: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals
|
2014-04-16 10:58:23 -06:00 |
|
|
Gregory Nutt
|
1e35f1730d
|
SAMA5 EMAC/GMAC: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals
|
2014-04-16 10:13:08 -06:00 |
|
|
Gregory Nutt
|
1927c147be
|
SAMA5 CAN: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals
|
2014-04-16 10:00:32 -06:00 |
|
|
Gregory Nutt
|
1b46ebc7f4
|
SAMA5 ADC: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals
|
2014-04-16 09:42:07 -06:00 |
|
|
Gregory Nutt
|
218554dc9d
|
STM32 OTGFS: Host USB tracing instrumentation added by Leo
|
2014-04-12 08:44:22 -06:00 |
|
|
Gregory Nutt
|
cd6039933e
|
SAMA5: The PIO used for the red LED is also used as the camera module reset line: Added a configuration option to suppress use of the red LED if the PIO is used for another purpose. Reported by David Sidrane.
|
2014-04-11 15:57:35 -06:00 |
|
|
Gregory Nutt
|
d128b47c71
|
SAMA5 TWI: Number of bytes transferred not be incremented on the first byte. From David Sidrane
|
2014-04-10 18:19:03 -06:00 |
|
|
Gregory Nutt
|
c208b25f89
|
Add some checks: if getpid() or get_errno_ptr() are called very early in the initialization sequence, they would fail
|
2014-04-10 10:20:44 -06:00 |
|
|
Gregory Nutt
|
2fcc57edb0
|
mv ramlog.h and syslog.h to new include/nuttx/syslog
|
2014-04-10 09:29:30 -06:00 |
|
|
Gregory Nutt
|
6be62a7ef3
|
configs/*/defconfig: Increase the number of pre-allocated watchdogs in configurations that use networking or USB
|
2014-04-09 10:57:56 -06:00 |
|
|
Gregory Nutt
|
6578d646da
|
Back out part of 610e2aa0c224e2936fe8009ef4a2351ce607067a: Need to be able to select USB console devices when there is no /dev/console enabled. Noted by Librae
|
2014-04-08 11:04:25 -06:00 |
|
|
Gregory Nutt
|
c306884d84
|
Add logic for TM4C125GXL clocking based on prototype from from Daniel Carvalho with modifications. I think the LM4F120 may have broken before as well(?). In any event, the LM4F120 also works well with this chanage
|
2014-04-07 15:32:13 -06:00 |
|
|
Gregory Nutt
|
177cb595d5
|
SAMA5 UDPHS: Fix error where bit was not cleared to acknowledge receipt of data and to setup for the next incoming data
|
2014-04-06 13:13:31 -06:00 |
|
|
Gregory Nutt
|
781f2804ee
|
SAMA5: Don't use MMU PMD bufferable bit to try to control write-through vs write-back. It does not work that way
|
2014-04-04 16:05:20 -06:00 |
|
|
Gregory Nutt
|
5eeb9f97fc
|
Fix a build error when only USB device tracing is enabled (from David Sidrane). Also an update to the USB tracing document
|
2014-04-04 08:56:10 -06:00 |
|
|
Gregory Nutt
|
2efc4d6396
|
SAMA5: On some hardware, reconfiguring the PLL while executing out of NOR FLASH causes crashes. This was fixed by David Sidrane by implementing RAM functions. The killer code is copied and executed from ISRAM and the crash is avoided.
|
2014-04-03 16:08:18 -06:00 |
|
|
Gregory Nutt
|
b884ab50f4
|
SAMA5: Fix SAMA5 so that interpretation of BMS bit is correct. From David Sidrane
|
2014-04-03 15:47:34 -06:00 |
|
|
Gregory Nutt
|
048230fb94
|
SAMA5: When booting from SDRAM, don't copy vectors to ISRAM. Instread just set the VBAR register to add address of the vectors in SDRAM
|
2014-04-03 14:09:11 -06:00 |
|
|
Gregory Nutt
|
11c7386dab
|
SAMA5: Make sure the MMU and caches are disabled on power up; flush the vector region D-Cache after copying interrupt vectors; make sure that D-Cache, I-Cache, and TLBs are invalidated after modifying the AXI MATRIX remapping
|
2014-04-02 16:27:00 -06:00 |
|
|
Gregory Nutt
|
16c4ea72ec
|
SAMA5: When running from SRAM, vectors must lie in ISRAM
|
2014-04-02 12:54:15 -06:00 |
|
|
Gregory Nutt
|
ed294643bd
|
sscanf: Use stroul() vs strol() for %u format. From kfrolov
|
2014-04-02 09:15:40 -06:00 |
|
|
Gregory Nutt
|
cbdc9155ab
|
SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console
|
2014-04-01 11:24:15 -06:00 |
|
|
Gregory Nutt
|
a29187bd34
|
SAMA5: Add DBGU register definition header file
|
2014-03-31 17:25:16 -06:00 |
|
|
Gregory Nutt
|
a44a4444e2
|
Cosmetic updates to comments and README files
|
2014-03-31 15:10:15 -06:00 |
|
|
Gregory Nutt
|
70815e5673
|
sched/Kconfig: Add another layer of menuing to simply this level
|
2014-03-31 11:32:22 -06:00 |
|
|
Gregory Nutt
|
4f59bc5878
|
Add CONFIG_CLOCK_MONTONIC
|
2014-03-31 10:01:03 -06:00 |
|
|
Gregory Nutt
|
68025784b0
|
Fix ftell() bug: It was not accounting for data buffered in memory. From Macs N
|
2014-03-31 09:47:28 -06:00 |
|
|
Gregory Nutt
|
cd135fe3a8
|
Complete fragmentary support for ferror(). From Macs N
|
2014-03-31 09:39:10 -06:00 |
|
|
Gregory Nutt
|
8772a4e104
|
Add support for CLOCK_MONOTONIC. From Macs N
|
2014-03-31 09:25:50 -06:00 |
|
|
Gregory Nutt
|
6bb8cc02df
|
sscanf(): Was returning the wrong number of conversions in many cases; Also, needs to return EOF if there were no conversions
|
2014-03-30 14:24:38 -06:00 |
|
|
Gregory Nutt
|
d14940a375
|
Fix some backward conditional compilation
|
2014-03-30 08:29:21 -06:00 |
|
|
Gregory Nutt
|
ec60f6cd9d
|
SAMA5: Remove HSCMI-related functions that did not belong in sam_pmc.c and give them their own file
|
2014-03-30 08:00:59 -06:00 |
|
|
Gregory Nutt
|
060b84240b
|
Add macro UNUSED to eliminate warnings about variables that are set to unused values
|
2014-03-30 07:58:58 -06:00 |
|
|
Gregory Nutt
|
392031ff7c
|
SAMA5D3x-EK: Change name of all board-specific configuration variables so that there are no collisions with names of similar variables for other boards
|
2014-03-30 07:26:38 -06:00 |
|
|
Gregory Nutt
|
aac2a6759d
|
SAMA5D23 boards: When running out of SDRAM, need to query the PMC to determine operating frequency
|
2014-03-29 17:51:06 -06:00 |
|
|
Gregory Nutt
|
1b6ae2ccbb
|
SAMA5: Add functions to calculate PLLACK, PCK, and MCK frequencies given the main clock frequency
|
2014-03-29 15:54:10 -06:00 |
|
|
Gregory Nutt
|
09fb2a1893
|
Add basic board support framework for the Atmel SAMA5D3 Xplained board (not finished)
|
2014-03-28 15:20:26 -06:00 |
|