Commit Graph

31910 Commits

Author SHA1 Message Date
Gregory Nutt de0ef2486f Some days I can't do anything right. 2018-03-03 11:39:58 -06:00
Gregory Nutt 430204daea drivers/wireless/cc1101.c: Fix a few things that I bungled in my review of the driver mods. Fix the logic that was dumping register contents: printf() may not be used within the OS and the syslog and debug macros may add ornamentatino to the output. The only real option inside the OS is to buffer the data and outputing with a single syslog write (vs. many tiny writes). 2018-03-03 10:32:32 -06:00
Author: lihaichen afe5f706f6 Squashed commit of the following:
cc1101:  Changes from review of last PR.
    remove gpio
    remove  cc1101 frame len
    remove FLAGS_RXONLY flags
    add cc1101 function
    remove some waring
    add cc1101 poll function
    add cc1101 register
    add cc1101 isr read data
    add cc1101 spi deviceId
    add cc1101 init2
    add wait cc1101 chip ready
    raw init cc1101
2018-03-03 08:53:51 -06:00
Mateusz Szafoni 160931ba72 Merged in raiden00/nuttx (pull request #607)
stm32f33xxx_adc.c: fix bug in RCC reset logic that resets ADC1 configuration when both ADC1 and ADC2 are in use

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-03-02 20:00:52 +00:00
Gregory Nutt bff4e8e5b0 Documentation: Update NxWidgets version number. 2018-03-02 13:05:42 -06:00
Gregory Nutt 69cc53c15c Update NuttX.html in preparation for the NuttX-7.24 release nuttx-7.24 2018-03-02 09:55:15 -06:00
Gregory Nutt 58e3c0b5df Update ReleaseNotes in preparation for 7.24 release 2018-03-02 09:04:08 -06:00
Gregory Nutt 73a1349afa Change 7.24 release to 3/2, I won't be getting it done today after all. 2018-03-01 15:00:57 -06:00
Gregory Nutt d9337f9146 Update changelog in preparation for nuttx-7.24 release. 2018-03-01 11:43:01 -06:00
Juha Niskanen b4a5cbb9de drivers/i2c and drivers/spi: Fix compile if CONFIG_DISABLE_PSEUDOFS_OPERATIONS, fix bad NULL checks 2018-03-01 08:36:48 -06:00
Gregory Nutt 2da2a79104 Update README 2018-03-01 08:36:48 -06:00
Mateusz Szafoni 2e5bef89b8 Merged in raiden00/nuttx (pull request #606)
stm32_hrtim: add repetition support and fix enum overflow

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-02-27 18:53:08 +00:00
Gregory Nutt 8fe9e81183 drivers/lcd: Add FT80x controls for the case where the audio amplifier is controlled by FT80x GPIOs vs MCU gpios. 2018-02-27 08:45:34 -06:00
Juha Niskanen 05f056a770 arch/arm/src/stm32f7: Backport RTC alarm setting changes from STM32L4. Most notably this fixes RTC getting stuck issue when both alarms were used. Root cause was writing RTC ISR register contents to RTC CR register. 2018-02-27 06:50:04 -06:00
Gregory Nutt dee0eda5ab include/lcd/ft80x: Add definitions stencil operations and midi sounds. 2018-02-26 15:24:41 -06:00
Gregory Nutt b901f08d90 Trivial changes from review of last PR. 2018-02-26 11:48:57 -06:00
Dmitriy Linikov 39ef04353c Merged in hardlulz/modem-3.0-nuttx/fix-parsing-dns-response (pull request #605)
Fixed parsing of DNS response packets having compressed names ending with pointer.

There were troubles parsing response packets which have compression of
QNAME/NAME field when only trailing part of the name (not the whole name)
is replaced with pointer to another part of the packet.
This commit fixes parsing of such packets.

Also I added checks to keep parsing only in bounds of the read part
of DNS response packet.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-02-26 17:43:37 +00:00
Gregory Nutt df231a966a include/nuttx/lcd/ft80x.h: Add audio format definitions. 2018-02-25 17:12:39 -06:00
Gregory Nutt 8d2ce5387c Fix a trivial (but important) typo 2018-02-25 11:43:48 -06:00
Gregory Nutt eeb40dc600 drivers/lcd: Extend FT80x touchscreen initialization; add more touchscreen-related definitions. 2018-02-25 11:18:35 -06:00
Gregory Nutt b2d415da79 configs/viewtool-stm32f107: Add support for FT80X initialization. Add ft80x configuration that will eventually be used for testing the ft80x if I ever receive hardware. 2018-02-24 13:11:27 -06:00
Gregory Nutt a903572ff6 drivers/lcd: Add and IOCTL command to fade the backlight on and off. 2018-02-23 10:44:10 -06:00
SP 52d54b2451 net/icmpv6/icmpv6: Eliminate warnings by correct the type uses to link structure into lists. 2018-02-23 08:04:50 -06:00
Masayuki Ishikawa 82e94a9948 Merged in masayuki2009/nuttx.nuttx/lc823450_dvfs_auto (pull request #604)
lc823450 dvfs auto

* arch/arm/src/lc823450: Fix up_enable_irq() timing for I2S.

    In previous commit, I2S IRQ might be sometimes assigned to CPU1
    when CONFIG_SMP=y. This change fixes this issue.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Refactor timer driver.

    Introduce lc823450_timer.h and move lc823450_timerisr.c to
    lc823450_timer.c Add MTM timer APIs for DVFS.  Introduce
    up_rtc_gettime() for CONFIG_RTC_HIRES.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Introduce idle time calculation in DVFS

    Also, DVFS autonomous mode based on CPU idle time is supported.
    NOTE: voltage control is still disabled.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Update defconfigs

    Enable RTC_HIRES instead of RTC_DATETIME (audio/rndis)
    Disable TCP_WRITE_BUFFERS and change SCHED_LPWORKPRIORITY (rndis)

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Update README.txt

    Update SMP and DVFS related part

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-02-23 13:26:40 +00:00
Gregory Nutt 9812f6f932 Trivial update to some comments 2018-02-22 18:42:27 -06:00
Gregory Nutt 3a2d0a06f4 net/tcp: Generalize Juho Grundstrom's IPv4 change for IPv6 as well. 2018-02-22 16:41:14 -06:00
Juho Grundstrom 13058858f2 net/tcp: tcp_send_[un]buffered.c: And header file inclusion missing in previous commit. 2018-02-22 16:30:46 -06:00
Juho Grundstrom c065f0fd49 net/tcp: tcp_send_[un]buffered.c: Check routing table in psock_send_addrchck(). Previously only ARP table was considered when determining if the data will actually be sent. 2018-02-22 16:24:15 -06:00
Gregory Nutt 5f83631a97 arch/arm/src/sam34: Fix a typo resulting in duplicate names in DMAC bit definitions. 2018-02-22 13:57:20 -06:00
Gregory Nutt 8dc924f9ae include/nuttx/ldc: Add some FT80x blend-related definitions. 2018-02-22 12:30:02 -06:00
Gianpaolo Ferroni Ariani 2c8eb5b240 net/tcp: Fixes hardfault when network goes done and network monitoring is in place. 2018-02-22 06:29:18 -06:00
Gregory Nutt 38a258bf3b drivers/ft80x: Now supports reading/writing multiple regisers with single ioctl command. 2018-02-21 11:45:34 -06:00
Gregory Nutt 02df81bc5f Squashed commit of the following:
drivers/lcd:  Add an IOcTL to FT80x driver to write to FIFO CMD RAM.
2018-02-20 15:24:52 -06:00
Dmitriy Linikov a8c58607e9 Merged in hardlulz/modem-3.0-nuttx/fix-sem-EINTR (pull request #603)
Added ECANCELED condition to DEBUGASSERT-s checking sem_wait result

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-02-20 18:24:53 +00:00
Dmitriy Linikov 9e8332e5c8 Merged in hardlulz/modem-3.0-nuttx/fixbuild-ipv4_forward (pull request #602)
Fixed misprint in ipv4_forward.c

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-02-20 18:23:48 +00:00
Juha Niskanen 2fd9728a3a arch/arm/src/stm32: stm32_flash.c: add progmem support for STM32L15XX 2018-02-20 07:05:07 -06:00
Gregory Nutt 8572837d9e Squashed commit of the following:
Author: Juha Niskanen <juha.niskanen@haltian.com>
Date:   Mon Feb 19 15:03:17 2018 -0600

    drivers/mtd:  mtd_config.c:  Add still more error handling (to detect bad underlying flash implementations)
    drivers/mtd:  mtd_config.c:  Remove MTD_ERASE that was erasing data block instead of erase block.  This is a partial revert of 4f18b4.  Reported-by: Pascal Speck <iktek01@yahoo.com>
    arch/arm/src/stm32l4:  stm32l4_flash: change flash programming to use page buffer for unaligned writes.
2018-02-19 15:03:47 -06:00
Louis Mayencourt bd81664b31 configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration. Add USART1 support (connected to the USB virtual serial port) 2018-02-19 14:38:22 -06:00
Gregory Nutt 237ff11db7 Squashed commit of the following:
drivers/lcd and include/nuttx/lcd:  Add FT80x support for writing to graphics memory.  Also add some definitions needed by apps/examples/ft80x for bitmap manipulation.
    drivers/lcd:  Review/update FT80x initializatin logic
2018-02-19 13:08:50 -06:00
Sebastien Lorquet 9527f849f4 drivers/lcd: Detect and handle more errors in return values within the LCD framebuffer and SSD1306 drivers 2018-02-19 07:32:44 -06:00
Gregory Nutt 3d27adc7d1 include/nuttx/lcd: Add some FT80x definitions and modify some structures in order to support apps/examples/ft80x. 2018-02-18 16:49:12 -06:00
Gregory Nutt 2baa155791 drivers/lcd: In order to actually use the new register access IOCTL calls, need to move the register address definitions out of the private header file and into the public header file. 2018-02-18 13:45:20 -06:00
Gregory Nutt 65513d58e3 drivers/lcd: Add FT80x IOCTL commands to access individual registers. 2018-02-18 12:39:15 -06:00
Gregory Nutt be73c65b64 drivers/lcd: Minor updates to FT80x initialization. 2018-02-18 11:04:29 -06:00
Gregory Nutt eb3663721e Squashed commit of the following:
drivers/lcd:  Rename ft80x_base.c to just ft80x.c.  Add logic to notify FT80X clients of events via signals.
    drivers/lcd:  Trivial updates to naming.  Add some new definitions.
2018-02-17 18:30:24 -06:00
Gregory Nutt 758e94f7a7 drivers/lcd: Add FT80x interrupt framework. Interrupts are still not used by the driver. 2018-02-17 16:36:11 -06:00
Gregory Nutt 885ab75045 drivers/lcd: Add support for creating display lists incrementally. 2018-02-17 14:48:18 -06:00
Gregory Nutt e4292dced8 drivers/lcd: Add unlink support to the FT80x driver. 2018-02-17 13:01:06 -06:00
Gwenhael Goavec-Merou 5ec2b9d6fe arch/arm/src/stm32/stm32f33xxx_rcc.c: A flash wait state configuration. Flash latency must be fixed according to sysclk frequency. If this operation
is not done or done after PLL configuration, the STM32 fail to continue boot
operation if the frequency if greater than 24MHz.  This common t add this operation according to the board variable STM32_SYSCLK_FREQUENCY.  Tested on stm32f334-disco board.
2018-02-17 12:27:29 -06:00
Gregory Nutt 6a405ead67 This commit adds a barbones FTDI FT80x driver. It is untested (I don't even have hardware yet and, hence, it is marked as EXPERIMENTAL
Squashed commit of the following:

    drivers/lcd:  Finishes off basic FT80X.  Still missing some niceties.
    drivers/lcd: Rethink FT80X display list interface.
    drivers/lcd:  More FT800x display list logic.  Still not complete.
    drivers/lcd:  Add some basic FT80x initialization logic.
    drivers/lcd:  Add ft80x display list IOCTL framework.  Still missing low level display list operations.
    drivers/lcd:  FT80x driver cannot be a standard LCD driver but must, instead, be a custom character driver.
    drivers/lcd:  Add FT800 co-processor commands and display list helpers.
    drivers/lcd:  Add SPI interface and framework for the initialization and the basic LCD driver.
    drivers/lcd:  Add beginnings of some FT80x implementation.
    drivers/lcd:  Add definitions for the FTDI FT801 part
    include/nuttx/lcd/ft800.h:  Add initial FT800 interface definition.
    drivers/lcd:  Add ft800 header file.
2018-02-17 11:59:07 -06:00