 Gregory Nutt
|
88a87f8e3f
|
6LoWPAN: The original, Contiki-based design used only a single buffer for reassemblying larger packets. This could be a problem issue for hub configurations which really need the capability concurrently reassemble multiple incoming streams concurrently. These was also a design issue in that the reassembly buffer could be corrupted by outgoing packets. The design was extended to support multiple reassembly buffers, each associated with the reassembly tag and source address. This assures that there can be be no corruption of the reassembly once it has started.
|
2017-08-26 10:00:47 -06:00 |
|
|
Gregory Nutt
|
f96a7cbc59
|
Update README
|
2017-08-25 16:27:55 -06:00 |
|
 Juha Niskanen
|
cc1f7a63fa
|
power: add driver for TI bq2429x battery charger. TODO: Untested. Does not have poll() support.
|
2017-08-25 07:26:00 -06:00 |
|
|
Juha Niskanen
|
1be5f0a3fc
|
STM32L4 COMP: comparators share RCC enable bit with SYSCFG
|
2017-08-25 07:06:39 -06:00 |
|
|
Juha Niskanen
|
1152e4868b
|
STM32L4 DAC: report transfer as completed in DMA callback. Without this even O_NONBLOCK writes block the calling task if DAC was using DMA.
|
2017-08-25 07:05:11 -06:00 |
|
|
Juha Niskanen
|
874947d7e5
|
STM32L4 TIM: TIM15,16,17 are always in APB2
|
2017-08-25 07:02:21 -06:00 |
|
|
Gregory Nutt
|
3d2498bedd
|
Trivial spelling fix in comments.
|
2017-08-25 07:01:06 -06:00 |
|
|
Gregory Nutt
|
ec47805639
|
configs/: Correct naming of some configuration variables.
|
2017-08-24 13:39:57 -06:00 |
|
|
Gregory Nutt
|
e341c74f06
|
drivers/audio: Fix naming of configurations to be compliant for vs1053 audio driver. One file was not saved before last commit.
|
2017-08-24 11:12:10 -06:00 |
|
|
Gregory Nutt
|
53ef64aae6
|
drivers/audio: Fix naming of configurations to be compliant for vs1053 audio driver.
|
2017-08-24 11:11:06 -06:00 |
|
|
Gregory Nutt
|
5129aeefd5
|
drivers/sensors: Fix remaining naming of configurations to be compliant for two more drivers.
|
2017-08-24 10:48:20 -06:00 |
|
|
Gregory Nutt
|
dc8f3778a9
|
drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go.
|
2017-08-24 10:26:53 -06:00 |
|
|
Gregory Nutt
|
1f023fa31a
|
drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go.
|
2017-08-24 10:10:00 -06:00 |
|
|
Gregory Nutt
|
269107afc8
|
drivers/sensors: Make naming configuration compliant for two more drivers. Still several to go.
|
2017-08-24 09:54:23 -06:00 |
|
|
Gregory Nutt
|
7f4af7b690
|
drivrs/sensors: Make a few other configuration settings consistent with the (undocumented) standard.
|
2017-08-24 09:45:46 -06:00 |
|
|
Gregory Nutt
|
5dd25bbfde
|
Missed two naming changes in last commit
|
2017-08-24 09:32:24 -06:00 |
|
|
Gregory Nutt
|
9e386e3b31
|
drivrs/sensors/hts221: Fix inconsistent configuration variable naming; Try to bring closer to an as-of-yet undocumented naming convention.
|
2017-08-24 09:22:36 -06:00 |
|
|
Gregory Nutt
|
a668806b94
|
Update some README files; Plus minor simplification to a preceding change.
|
2017-08-24 06:44:35 -06:00 |
|
|
Gregory Nutt
|
e89edd6784
|
Networking: Rethink last fix. We can make this less protocol dependent.
|
2017-08-23 15:30:56 -06:00 |
|
|
Gregory Nutt
|
394a340da0
|
Networking: Compile error if Unix domain sockets selected; Update SAME70-xplained README me.
|
2017-08-23 15:04:40 -06:00 |
|
 Anthony Merlino
|
d5e6f269b2
|
Merged in merlin17/nuttx (pull request #467)
drivers/wireless/spirit: Fixes a pre-processor directive
Approved-by: Gregory Nutt <gnutt@nuttx.org>
|
2017-08-23 01:24:03 +00:00 |
|
|
Anthony Merlino
|
fbf830aef2
|
drivers/wireless/spirit: Fixes a pre-processor directive
|
2017-08-22 21:15:22 -04:00 |
|
|
Gregory Nutt
|
5ac993d2ef
|
Update TODO list
|
2017-08-22 18:15:09 -06:00 |
|
|
Gregory Nutt
|
1972fd827f
|
Another trivial update to the same README file.
|
2017-08-22 12:39:08 -06:00 |
|
|
Gregory Nutt
|
3f44666e16
|
Update a README file.
|
2017-08-22 12:35:58 -06:00 |
|
|
Gregory Nutt
|
9a8c4121e5
|
Network procfs: procfs/net_procfs_route.c building error occur if CONFIG_NET_ROUTE is enabled. Fix suggested by Aleksandr Kazantsev
|
2017-08-22 10:21:07 -06:00 |
|
 Jussi Kivilinna
|
a099506b1b
|
drivers/lcd: ssd1306: separate lcd_dev_s setup to separate object. g_oleddev takes 1 KiB because framebuffer and was allocated to .data section because of lcd_dev_s function pointer setup. Move lcd_dev_s setup out, so that g_oleddev goes to .bss and avoid wasting ROM.
|
2017-08-22 08:46:00 -06:00 |
|
|
ussi Kivilinna
|
89cc4741ac
|
drivers/lcd: ssd1306: fix memory corruption caused by ssd1306_getrun(). ssd1306_getrun was writing one extra byte (with value 0) past target buffer when pixlen is multiple of 8. When pixlen was not multiple of 8, last byte of buffer was fully cleared, instead of modifying only the (pixlen % 8) bits of last byte.
|
2017-08-22 08:42:40 -06:00 |
|
|
Jussi Kivilinna
|
3dfeb9e59f
|
drivers/lcd: ssd1306: add support for board power control. ThingseeOne has regulator for controlling display power on/off. Patch adds support for board based power control to SSD1306 driver.
|
2017-08-22 08:40:27 -06:00 |
|
|
Jussi Kivilinna
|
310a29227a
|
drivers/lcd: add DD-12864WO-4A/SSD1309 support to SSD1306 driver
|
2017-08-22 08:32:52 -06:00 |
|
|
Juha Niskanen
|
d7ae3d74c3
|
STM32L4 ADC: correct EXTSEL macros
|
2017-08-22 06:49:48 -06:00 |
|
 Pekka Ervasti
|
6b1ccef2f9
|
STM32L4 COMP: bind to upper half comp driver
|
2017-08-22 06:47:57 -06:00 |
|
|
Pekka Ervasti
|
cc0fea60ad
|
drivers: analog: comp: add poll support
|
2017-08-22 06:26:57 -06:00 |
|
|
Gregory Nutt
|
67befb9642
|
ENC28J60: Update interface to use newer parameter passing to interrupt handlers
|
2017-08-21 16:49:43 -06:00 |
|
|
Gregory Nutt
|
241c1433ef
|
ENCX24J600: Fix some warnings. Update interface to use newer parameter passing to interrupt handlers
|
2017-08-21 16:23:22 -06:00 |
|
|
Gregory Nutt
|
17ca117104
|
Update README
|
2017-08-21 15:23:17 -06:00 |
|
 Mateusz Szafoni
|
509a756421
|
Merged in raiden00/nuttx (pull request #466)
Master
Approved-by: Gregory Nutt <gnutt@nuttx.org>
|
2017-08-21 18:14:33 +00:00 |
|
|
raiden00pl
|
a5997cb186
|
stm32_dac: add support for HRTIM triggering
|
2017-08-21 19:46:18 +02:00 |
|
|
raiden00pl
|
a5f3a5848d
|
stm32_dac.c typo
|
2017-08-21 18:59:21 +02:00 |
|
|
raiden00pl
|
db7a94288f
|
stm32f33xxx_dma.h: typos
|
2017-08-21 18:50:07 +02:00 |
|
|
raiden00pl
|
b460f2bca1
|
stm32f10xxx_dma.h: fix DAC names and remove STM32F33 section
|
2017-08-21 18:50:07 +02:00 |
|
|
raiden00pl
|
104ff2b5d8
|
stm32_dac: separate dma buffer configuration for channels
|
2017-08-21 18:50:07 +02:00 |
|
|
Gregory Nutt
|
55f27c40e8
|
Add support for network procfs statistics when Nothing is enabled but PF_IEEE802154.
|
2017-08-21 09:31:12 -06:00 |
|
|
Gregory Nutt
|
77534e2b49
|
PF_IEEE802154: Improve some backlog counting logic; add more assertions to catch cases where the backlog count might deviate from the actual backlog.
|
2017-08-21 08:18:53 -06:00 |
|
|
Gregory Nutt
|
6b7a26c95c
|
PF_IEEE802154: Add a maximum backlog option. This will prevent overrun of the RX frame queue if many frames are received from the radio, but no application is receiving the queued data.
|
2017-08-21 07:52:43 -06:00 |
|
|
Gregory Nutt
|
0eac90f775
|
PF_IEEE802154: On input, there may be a list of frames provided, not just one. When closed() and connection is freed, also need to free any frames remaining in the RX queue.
|
2017-08-21 07:13:34 -06:00 |
|
|
Gregory Nutt
|
969d7c5814
|
Networking: Remove driver based backlog support. This affects the entire network, but is used by only one driver. The only supported with of supported RX backlog is via common read-ahead buffering.
|
2017-08-21 06:28:59 -06:00 |
|
|
Juha Niskanen
|
17cd0696cb
|
Merged in juniskane/nuttx/juniskane/chiph-edited-online-with-bitbucket-corre-1503300654585 (pull request #465)
chip.h edited online with Bitbucket: correct some STM32_NDAC
Approved-by: Gregory Nutt <gnutt@nuttx.org>
|
2017-08-21 12:03:41 +00:00 |
|
|
Juha Niskanen
|
37867ae3b9
|
chip.h edited online with Bitbucket: correct some STM32_NDAC
|
2017-08-21 07:30:58 +00:00 |
|
|
Gregory Nutt
|
70911c3f52
|
PktRadio loopback driver: Fix compile problem by removing inappropriate const storage class.
|
2017-08-20 13:19:29 -06:00 |
|