058a938268
Merged in antmerlino/nuttx/logupto-fix (pull request #559 )
...
syslog: Fixes LOG_UPTO macro to include specified log level
Approved-by: Gregory Nutt <gnutt@nuttx.org >
2017-12-20 13:34:29 +00:00
c2e50351e4
Merged in masayuki2009/nuttx.nuttx/lc823450_http_streaming (pull request #560 )
...
lc823450 http streaming
* arch/arm/src/lc823450: Use spinlock APIs in lc823450_gpio.c
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com >
* arch/arm/src/lc823450: Add a warning message in up_ack_irq()
In SMP mode, H/W interrupts should be handled on CPU0 to avoid deadlocks.
Other changes:
Fix a potential race condition in up_enable_irq()
Use spinlock APIs instead of critical section APIs.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com >
* arch/arm/src/lc823450: Enable HRT_TIMER in lc823450_timerisr.c
Other changes:
Fix style violations and call up_enable_irq() to assign CPU0 for IRQ handling.
Use spinlock APIs instead of critical section APIs.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com >
* arch/arm/src/lc823450: Fix race conditions in dma/usbdev.
In SMP mode, critical data must be protected explicitly.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com >
* configs/lc823450-xgevk: Update README.txt
Add notes on .gdbinit and networking. Update comments on SMP.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com >
* configs/lc823450-xgevk: Update defconfigs
Enable HRT_TIMER, LC823450_MTM0_TICK, SPINLOCK_IRQ
Enable NET_TCP_RWND_CONTROL, NXPLAYER_HTTP_STREAMING_SUPPORT (rndis only)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com >
Approved-by: Gregory Nutt <gnutt@nuttx.org >
2017-12-20 13:33:06 +00:00
793c8b785a
arch/arm/src/lpc54: Missed a change in the last commit
2017-12-19 15:11:22 -06:00
321a7a64af
arch/arm/src/lpc54xx and configs/lpcxpresso-lpc54628: Correct some SD/MMC clock divider logic.
2017-12-19 14:05:36 -06:00
93b28017ab
arch/arm/src/lpc54xx: Make the SPI driver selections EXPERIMENTAL since the SPI peripherals are not fully implemented.
2017-12-19 13:09:15 -06:00
a8933f96bd
configs/lpcxpresso-lpc54628: Fix SD/MMC clock divisor.
2017-12-19 12:43:44 -06:00
ba1301a43a
arch/arm/src/lpc54xx: Make the SDMCC driver selection EXPERIMENTAL since it has not yet been verified.
2017-12-19 12:23:37 -06:00
5a66684293
Squashed commit of the following:
...
arch/arm/src/lpc54xx: Adds the LPC54-specific clock configuration logic to the leveraged SD/MMC driver.
arch/arm/src/lpc54xx: Leveraged SD/MMC driver builds without error but is still missing clock configuration logic.
arch/arm/src/lpc54xx: Bring in LPC43xx SD/MMC driver from https://github.com/Smoothieware/smoothie-nuttx/tree/master/nuttx/arch/arm/src/lpc43xx
2017-12-19 12:09:22 -06:00
c17651e26e
arch/arm/include/lpc54xx: Add SD/MMC header file.
2017-12-19 09:12:42 -06:00
6f897d32a2
confifgs/lpcxpresso-lpc54628: Calibrate delay loop.
2017-12-19 08:21:41 -06:00
5a0963f0b0
drivers/ft5x06.x and related: Minor cleanup after completing the FT5x06 driver verification.
2017-12-19 07:14:02 -06:00
d29de95996
drivers/input/ft5x06.c: Fix a problem was was causing missing reports when the touch ends.
2017-12-18 20:06:42 -06:00
d9997846b6
Lpcxpresso-Lpc54618 and FT5x06 driver. Some improvements in configuration and the touchscreen driver improves the behavior some. Now I get the calibration screen and detect touches (but no un-touches).
2017-12-18 17:22:35 -06:00
ead23dca30
configs/lpcxpresso-lpc54628: Add an NxWM configuration. Not yet functional.
2017-12-18 13:33:37 -06:00
3edd670c71
configs/stm32ldiscovery: Fix a mimatched #endif introduced in recent commit.
2017-12-18 10:41:47 -06:00
4a5e18a6db
drivers/ft5x06.c: Add additional configuration options: Optimize if multi-touch capability is not used. Add options to swap X/Y and thresholding to reduce the rate of false alarm reports (with no motion).
2017-12-18 10:31:49 -06:00
a0004173d4
arch/arm/src/a1x: Fix a compile error introduce in recent commit.
2017-12-18 09:00:41 -06:00
23dfc0bf06
drivers/ft5x06: Add a polled mode of operation for the FT5x06 in attempt to work around the fact that the LPCXpresso-LPC54628 chose a non-interrupt pin for the FT5x06 interrupt. Driver is still not yet functional.
2017-12-18 08:58:07 -06:00
783d2cabee
configs/indium-f7: None of the configurations would build because the claimed to support buttons, but the button code does not compile. Refreshed all configurations with the configuration tools that have all become corrupted. Somebody has been hand editing config files and fucking things up!
2017-12-18 06:57:38 -06:00
db079608d9
drivers/power/bq2429x.c: Add trickle charging mode
2017-12-18 06:38:41 -06:00
c014400895
drivers/input/ft5x06: Fix a misconception.. WAKE is an output, not an input.
2017-12-18 06:36:44 -06:00
30070b06df
Merged in masayuki2009/nuttx.nuttx/tcp_rcvwnd_control (pull request #555 )
...
net/tcp: Introduce tcp receive window control based on I/O buffer
NOTE: The algorithm is still experimental but useful for http streaming.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com >
Approved-by: Gregory Nutt <gnutt@nuttx.org >
2017-12-18 12:11:52 +00:00
3582208496
Merged in hardlulz/modem-3.0-nuttx/fix-pcf8574-build (pull request #556 )
...
Fixed build of PCF8574 driver when its interrupts aren't enabled by config.
Approved-by: Gregory Nutt <gnutt@nuttx.org >
2017-12-18 12:10:49 +00:00
b4875e2286
Merged in juniskane/nuttx-1/juniskane/battery_gaugeh-edited-online-with-bitbuc-1513594794596 (pull request #558 )
...
battery_gauge.h edited online with Bitbucket
Approved-by: Gregory Nutt <gnutt@nuttx.org >
2017-12-18 12:10:02 +00:00
27d4bb43e6
Merged in masayuki2009/nuttx.nuttx/lc823450_smp_test (pull request #557 )
...
sched/sched: Remove DEBUGASSERT() in sched_mergepending()
Because this DEBUGASSERT() assumes that while loop executes only once.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com >
Approved-by: Gregory Nutt <gnutt@nuttx.org >
2017-12-18 12:09:06 +00:00
9dd5196741
arch/arm/src/a1x, kl, lpc11xx, lpc31xx, and nuc1xx: Fix some compile warnings that I introduced with a possibly overzealous recent change.
2017-12-17 18:12:19 -06:00
b7391ec599
arch/arm/src/sama5 and samdl: Fix some compile warnings that I introduced with a possibly overzealous recent change.
2017-12-17 17:50:31 -06:00
91f48701ae
arch/arm/src/sam34: Fix some compile warnings that I introduced with a possibly overzealous recent change.
2017-12-17 17:43:20 -06:00
8057af6724
fs/fat: Still trying to eliminate warnings in all configurations.
2017-12-17 17:10:37 -06:00
bd8a07a4b2
configs: Still trying to get consistent name. button driver expects board to define NUM_BUTTONS, not BOARD_NUM_BUTTONS. That was changed in all board.h header files, but there are still references in configs/ C files to BOARD_NUM_BUTTONS
2017-12-17 16:54:53 -06:00
7ca9e8c376
Eliminate another warning.
2017-12-17 16:51:20 -06:00
cf8a7bebf6
Eliminate another warning.
2017-12-17 16:47:49 -06:00
f96478bb99
fs/fat: Don't warn about the CONFIG_FAT_MAXFNAME being too large if long file name support is not implemented.
2017-12-17 16:41:26 -06:00
0e6e05bf11
arch/arm/src/kinetis: Fix some compile warnings that I introduced with a possibly overzealous recent change.
2017-12-17 16:26:03 -06:00
ac70f688a3
Update README.txt
2017-12-17 15:32:07 -06:00
c62a9ea727
drivers/input/ft5x06.c: Add a driver for the FT5x06 capacitive, multi-touch, touchscreen controller. configs/lpcxpresso-lpc54628: Add support for the the FT5x06. Enable the driver as well as the apps/examples touchscreen test. Untested on initial commit.
2017-12-17 15:17:06 -06:00
87252297d6
arch/arm/src/: Fix a error in last commit that was cloned in three places.
2017-12-17 14:38:20 -06:00
b8ea9e9c64
arch/arm/src/lpc17xx, lpc43xx, and stm32: Fix some compile warnings that I introduced with a possibly overzealous recent change.
2017-12-17 14:29:55 -06:00
223104a6b4
fs/nfs/nfs_vfsops.c: Correctly infer file type. The file type is in struct nfs_statinfo_s's ns_type field, not in the ns_mode field.
2017-12-17 06:43:30 -06:00
a1e250697c
configs/*/include; Remove prototype of xyz_boardinitialize() from board.h files. The authorative prototype is in arch/arm/src/xyz/xyz_start.h
2017-12-16 20:47:44 -06:00
0f10f6bdec
configs/*/include; Remove prototype of stm32_boardinitialize() from board.h files. The authorative prototype is in arch/arm/src/stm32*/stm32*_start.h
2017-12-16 20:02:03 -06:00
664484bf5b
configs/indium/include/board.h: Remove extra endif
2017-12-16 19:29:58 -06:00
3dfe0f309c
arch/arm/src/lpc54xx: Add WWDT header file.
2017-12-16 17:50:59 -06:00
face14b0db
confgs/indium-f7: Adds support for the RAF Research Indium-F7 board.
2017-12-16 16:04:58 -06:00
de4fc5864f
arch/arm/src/lpc54xx: Fix some GPIO interrupt configuration errors. Add logic to acknowledge rising/falling edge events. config/lpcxpresso-lpc545628: Add an intermediate interrupt handler to support acknowledgement of rising and falling edge interrupts.
2017-12-16 15:34:41 -06:00
5a12079e53
arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.
2017-12-16 13:00:06 -06:00
83b382e906
arch/arm/src/stm32f7: Completes support for the STM32F72x/73x family.
2017-12-16 08:01:57 -06:00
4c72f57273
arch/arm/src/lpc54xx: I2C now appears to be functional. Needs more testing.
2017-12-15 14:58:37 -06:00
c8a8eb028f
arch/arm/src/lpc54xx: Complete coding of the I2C driver. It is not yet functional and has not yet been seriously tested. config/lpcxpresso-lpc54628: Add support for I2C2 and for the I2C tool to the nsh configuration.
2017-12-15 11:38:55 -06:00
9638f3f065
fs/fat: CONFIG_FAT_MAXFNAME may not exceed NAME_MAX (CONFIG_NAME_MAX)
2017-12-15 06:19:14 -06:00
Anthony Merlino
Masayuki Ishikawa
Gregory Nutt
Juha Niskanen
Dmitriy Linikov
Michael Jung
Bob Feretich