Now that time_t is unconditionally 64-bit (signed int64_t) and the
struct timespec fields tv_sec / tv_nsec are wide enough on their own,
the explicit (uint64_t)/(int64_t)/(int) casts that used to guard the
multiplications and subtractions in *_us / *_ms / *_ns helpers are no
longer needed. Drop them to keep the timekeeping math readable and
consistent with the previous sclock_t/time_t cleanup.
In the same spirit, this commit also:
* Normalises the printf-style format specifiers and casts used to
print tv_sec / tv_nsec / tv_usec values across arch/, drivers/,
fs/, sched/ and libs/. The prior code was a mix of
"%d"/"%u"/"%ld"/"%lu"/"%lld"/PRIu32/PRIu64 with matching
(int)/(unsigned long)/(long long)/PRIu* casts; some formats
truncated time_t on 32-bit hosts, others mismatched signedness or
width. Replace all such cases with the portable POSIX-recommended
forms:
- tv_sec (time_t, signed, impl-defined width) -> %jd + (intmax_t)
- tv_nsec (long, signed) -> %ld (no cast)
- tv_usec (suseconds_t / long) -> %ld (no cast)
Add #include <stdint.h> where required.
* Drops a few stale `(FAR const time_t *)&ts.tv_sec` casts and
related `(FAR struct tm *)` / `(const time_t *)` casts in
gmtime_r() / localtime_r() / gmtime() callers; ts.tv_sec is plain
time_t now and the casts only obscured the type.
* Fixes one overflow in fs/procfs/fs_procfscritmon.c where
all_time.tv_sec * 1000000 could overflow on 32-bit time_t before
being multiplied again; cast to uint64_t at the start.
No behavioural change.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
debug.h is a NuttX-specific, non-POSIX header. Placing it in the
top-level include/ directory creates naming conflicts with external
projects that define their own debug.h.
This commit moves the canonical header to include/nuttx/debug.h,
following the NuttX convention for non-POSIX/non-standard headers,
and updates all in-tree references.
A backward-compatibility shim is left at include/debug.h that
emits a deprecation #warning and re-includes <nuttx/debug.h>,
allowing out-of-tree code to continue building while migrating.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Add configuration "CONFIG_SCHED_CRITMONITOR_MAXTIME_BUSYWAIT", which can record the busy waiting time to get spinlock or enter critical section.
Signed-off-by: wangzhi16 <wangzhi16@xiaomi.com>
Signals in NuttX serve two primary purposes:
1. Synchronization and wake-up:
Signals can be used to block threads on specific signal sets and later
wake them up by delivering the corresponding signals to those threads.
2. Asynchronous notification:
Signals can also be used to install callback handlers for specific signals, allowing threads to
asynchronously invoke those handlers when the signals are delivered.
This change introduces the ability to disable all signal functionality to reduce footprint for NuttX.
Signed-off-by: Chengdong Wang wangchengdong@lixiang.com
The lines will end with \n to prevent atoi('\n') from always being 0. It is recommended to check the first byte directly.
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Many times, context switching does not occur when the thread stack
memory is almost exhausted, so we need to mofify up_check_tcbstack to
accurately detect it.
Co-authored-by: Chengdong Wang <wangchengdong@lixiang.com>
Signed-off-by: guoshengyuan1 <guoshengyuan1@xiaomi.com>
Refered to PRINTF(3), the [v]snprintf returns the number of characters
printed (excluding the null byte used to end output to strings).
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
This patch is a rework of the NuttX file descriptor implementation. The
goal is two-fold:
1. Improve POSIX compliance. The old implementation tied file description
to inode only, not the file struct. POSIX however dictates otherwise.
2. Fix a bug with descriptor duplication (dup2() and dup3()). There is
an existing race condition with this POSIX API that currently results
in a kernel side crash.
The crash occurs when a partially open / closed file descriptor is
duplicated. The reason for the crash is that even if the descriptor is
closed, the file might still be in use by the kernel (due to e.g. ongoing
write to file). The open file data is changed by file_dup3() and this
causes a crash in the device / drivers themselves as they lose access to
the inode and private data.
The fix is done by separating struct file into file and file descriptor
structs. The file struct can live on even if the descriptor is closed,
fixing the crash. This also fixes the POSIX issue, as two descriptors
can now point to the same file.
Signed-off-by: Ville Juven <ville.juven@unikie.com>
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This patch fixed userspace headers conflict. Architecture-related definition and API should not be exposed to users.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Summary:
1.Add configuration to allocate memory from the specified section
2.Replace all memory operations (kmm_) in the vfs with
fs_heap_. When FS_HEAPSIZE > 0, memory is requested for the file system by specifying a configured heap location. By default (i.e. FS_HEAPSIZE=0) fs_heap_ is equivalent to kmm_
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
There will be a large performance loss after SCHED_CRITMONITOR is enabled.
By isolating thread running time-related functions, CPU load can be run with less overhead.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
Add a common method to format backtrace to buffer, so it can be used by both mm, fs and other possoble modules.
Signed-off-by: fangpeina <fangpeina@xiaomi.com>
Change the type of task group member to single list chain to
avoid accessing the memory allocator to improve the performance
Signed-off-by: chao an <anchao@lixiang.com>
Usage:
1. CONFIG_FS_PROCFS_MAX_STACK_RECORD > 0, such as 32,
2. add '-finstrument-functions' to CFLAGS for What you want to check
stack.
3. mount porcfs
4. cat /proc/<pid>/stack will print backtace & size
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
This moves task / thread cancel point logic from the NuttX kernel into
libc, while the data needed by the cancel point logic is moved to TLS.
The change is an enabler to move user-space APIs to libc as well, for
a coherent user/kernel separation.
Add a new field to record the global on the basis of mm_backtrace.
When using alloc, the field is incremented by 1,
so that the memory usage can be dumped within the range
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Refer to issue #8867 for details and rational.
Convert sigset_t to an array type so that more than 32 signals can be supported.
Why not use a uin64_t?
- Using a uin32_t is more flexible if we decide to increase the number of signals beyound 64.
- 64-bit accesses are not atomic, at least not on 32-bit ARMv7-M and similar
- Keeping the base type as uint32_t does not introduce additional overhead due to padding to achieve 64-bit alignment of uin64_t
- Some architectures still supported by NuttX do not support uin64_t
types,
Increased the number of signals to 64. This matches Linux. This will support all xsignals defined by Linux and also 32 real time signals (also like Linux).
This is is a work in progress; a draft PR that you are encouraged to comment on.
Xiang Xiao
Piyush Patle
wangzhi16
wangchengdong
anjiahao
guoshengyuan1
wangjianyu3
Ville Juven
dongjiuzhu1
raiden00pl
chenrun1
chao an
Alin Jerpelea
ouyangxiangzhen
Neo Xu
xuxingliang
ligd
yinshengkai
Shoukui Zhang
fangpeina
Zhe Weng
chao an
Gregory Nutt
lilei19