113 Commits

Author SHA1 Message Date
zhanghongyu be3ad13260 drivers/net/rpmsgdrv.c: add bidirectional data netdev support, server side
Server side: when ns_bind, create the netdev.

Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
2026-01-16 09:42:01 +08:00
zhanghongyu aa8ffea3cf netdev_upperhalf: convert Kconfig to variable
Build Documentation / build-html (push) Has been cancelled
Upperhalf supports multiple working modes at the same time,
which is specified by NIC when register

Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
2025-12-14 10:01:22 +08:00
LuchianMihai 95efa6f7cf net/mdio: add mdio bus
Currently the mdio communication is part of the monolithic 'full netdevs'.
This commit serves as an way to add modularity for the netdevs drivers.
A new upperhalf/lowerhalf mdio device comes with this commit that manages the data transfer ofer mdio interface.

Signed-off-by: Luchian Mihai <luchiann.mihai@gmail.com>
2025-09-25 16:24:18 +08:00
michal matias 95b3b65778 drivers/net: Add base driver for the OA-T6 protocol MAC-PHYs
Add base driver common for OPEN Alliance 10BASE-T1x MAC-PHY Serial Interface (OA-TC6)
protocol SPI MAC-PHYs.

Signed-off-by: michal matias <mich4l.matias@gmail.com>
2025-09-03 00:53:03 +08:00
michal matias 4a4235b5a2 drivers/net: Remove the NCV7410 10BASE-T1S MAC-PHY driver
This commit removes existing support for the NCV7410 10BASE-T1S MAC-PHY.
The driver will be replaced by its generalized version with different organization.
The new driver has naming clashes with the old, therefore the old has to be removed first.

Signed-off-by: michal matias <mich4l.matias@gmail.com>
2025-08-25 20:32:35 +08:00
p-szafonimateusz 880c8e5d26 drivers/net: add IGB network card support
Build Documentation / build-html (push) Has been cancelled
Add support for Intel IGB type of network cards.

Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
2025-07-08 10:02:15 +02:00
LuchianMihai f4e8def270 drivers/net/Kconfig: Move NET_IGC_TXDESC and NET_IGC_RXDESC to NET_IGC menu 2025-07-03 00:16:24 +08:00
michal matias c5a3089e87 drivers/net: Add support for the NCV7410 10BASE-T1S MAC-PHY
Docker-Linux / push (push) Has been cancelled
This commit adds driver for the Onsemi NCV7410 10BASE-T1S
Ethernet MAC-PHY.

Signed-off-by: michal matias <mich4l.matias@gmail.com>
2025-06-28 08:49:46 -03:00
p-szafonimateusz 5e48f2a3d8 drivers/net/igc: make Interrupt Throttle configurable
make Interrupt Throttle configurable for igc

Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
2024-11-27 02:46:04 +08:00
p-szafonimateusz bf4eadf735 drivers/net/{e1000|igc}: configure RX/TX descriptors from Kconfig
configure E1000/IGC RX/TX descriptors from Kconfig

Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
2024-11-27 02:46:04 +08:00
Xiang Xiao d7209fabf4 pci: Remove igc produt config
to simplify the configuration since the driver could detect the device correctly

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2024-11-17 08:40:26 +01:00
yezhonghui 775ff286a4 pci e1000 net delete produce config
Signed-off-by: yezhonghui <yezhonghui@xiaomi.com>
2024-11-17 08:40:26 +01:00
ouyangxiangzhen 5450b50951 net/igc: Support Intel I226V.
This commit supported Intel I226V.

Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
2024-11-05 14:03:02 +08:00
p-szafonimateusz 1e212981b9 drivers/net: add support for Intel I225 network card
add support for Intel I225 network card

Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
2024-09-17 01:42:38 +08:00
p-szafonimateusz bc0c7b0db3 drivers/net: add Intel e1000 network card support
add Intel e1000 network card support

Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
2024-09-17 01:42:38 +08:00
daichuan e48d5d8271 add for support cmake with netdev_notify_recvcpu.c
Signed-off-by: daichuan <daichuan@xiaomi.com>
2024-08-30 01:45:06 +08:00
daichuan b5753d06f2 support rss/arfs with device
Signed-off-by: daichuan <daichuan@xiaomi.com>
2024-08-30 01:45:06 +08:00
Zhe Weng acbddd11d5 net/netdev: Add periodic log for netdev statistics
Work for every network device using `CONFIG_NETDEV_STATISTICS`.

Log style:
<interface>:T{done}/{total},R({v4}+{v6})/{total} {Protocol}:T{tx},R{rx},D{drop}
Example:
wlan0:T10/10,R(10+20)/31 TCP:T0,R0,D0 UDP:T0,R10,D0 ICMP:T0,R0,D0 ICMP6:T0,R0,D0

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2024-08-22 16:17:56 +08:00
liqinhui e04aa9ac51 wifisim: Support the setting of the number of simulated WiFi interfaces.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
2024-08-21 13:25:53 +08:00
zhanghongyu ccf60a7bab netdev_upperhalf: add polling mode support for tx/rx
support more work modes to support more scenarios

Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
2024-08-21 02:31:53 +08:00
Jani Paalijarvi 92747b7529 drivers/net/ksz9477: Add port mirroring support
Signed-off-by: Jani Paalijarvi <jani.paalijarvi@unikie.com>
2024-06-27 18:09:57 +08:00
Jukka Laitinen 9277be2503 Add configuration option for RTL8211F RGMII PHY
Also extend the "struct phy_desc_s" to support for 1GB PHY's, the speed
detection always needs more than one bit.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2024-05-02 16:30:41 -03:00
Bowen Wang 169f47beec rpmsg: make all the rpmsg services deponds on RPMSG
After decoupled the rpmsg and rptun, all the rpmsg service should
depends on the RPMSG.

Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
2024-02-18 04:09:34 -08:00
David Sidrane 93f37ab1da net:Add support for multi PHY
Support runtime phy selection based on a list
   supplied by board.h
   For Example:

   #define BOARD_ETH0_PHY_LIST                   \
	{                                        \
		"LAN8742A",                      \
		MII_PHYID1_LAN8742A,             \
		MII_PHYID2_LAN8742A,             \
		MII_LAN8740_SCSR,                \
		0,                               \
		0xffff,                          \
		MII_LAN8720_SPSCR_10MBPS,        \
		MII_LAN8720_SPSCR_100MBPS,       \
		MII_LAN8720_SPSCR_DUPLEX,        \
		22,                              \
	},                                       \
	{                                        \
		"TJA1103",                       \
		MII_PHYID1_TJA1103,              \
		MII_PHYID2_TJA1103,              \
		0xffff,                          \
		18,                              \
		0xffff,                          \
		0,                               \
		MII_LAN8720_SPSCR_100MBPS,       \
		MII_LAN8720_SPSCR_DUPLEX,        \
		45,                              \
	},                                       \
2024-01-06 04:26:12 -08:00
Jukka Laitinen ebe961df9e drivers/net/ksz9477: Add simple port-based static VLAN configuration
Add a static port-based VLAN configuration for KSZ9477 switch. This doesn't
use the VLAN tagging, but is a switch's internal mechanism to simply configure
if the packet forwarding is allowed from one port to another.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2023-12-20 01:30:54 -08:00
liqinhui 6a8c638d57 qemu/wifi: Add the virtual wifi function on the emulator.
-The qemu wifi fucntion only supports the STA mode and the following
 operations:
 wapi mode wlan0 2
 wapi scan wlan0
 wapi psk wlan0 password 3
 wapi essid wlan0 wifi_name 1
 wapi show wlan0
 wapi disconnect wlan0
-Eanble the virtual wifi function with the MACRO `CONFIG_DRIVERS_WIFI_SIM`.

Signed-off-by: liqinhui <liqinhui@xiaomi.com>
2023-12-14 20:22:12 -08:00
Dong Heng bf54a5ae50 driver/net/lan9250: Add LAN9250 driver(SPI and QSPI mode) 2023-12-07 19:53:05 -08:00
raiden00pl b565e28da3 Kconfigs: rename {Rpmsg|rpmsg} to RPMGS 2023-10-28 13:58:56 +08:00
liqinhui d27ca03b6c wifi/simdriver: Support the sim wifi.
Add the Sim WiFi function, which can provide the wifi operating on nuttx sim emulator,
  and support two modes that simulate wifi, HWSIM and RNC(real network card).

 - In the HWSIM mode, we simulates two wlan interfaces. The wlan0 is STA and
   the wlan1 is AP. The wlan0 can connect to the wlan1 in the nuttx simulator.
 - In the RNC mode, we can use the same wlan interface name on the nuttx simulator
   to control the connection behavior of the real wireless card.

Signed-off-by: liqinhui <liqinhui@xiaomi.com>
2023-10-12 17:08:25 +08:00
Jukka Laitinen b343f5c0e7 drivers/net: Add a management driver for ksz9477 ethernet switch
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2023-09-08 22:34:27 +08:00
Zhe Weng c253bb91a2 drivers/net: Add wireless ops in upper-half driver
Take the idea from Linux's iw_handler array and esp32c3_wlan's wlan_ops_s, and make it a common logic of upper-half driver.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-07-12 03:32:02 +08:00
liuzhao 899471c6bd add support for YT8512 phy 2023-07-11 03:40:53 +08:00
Masayuki Ishikawa 8c89052fb3 drivers/net, include/nuttx/net: Add AR8031 PHY
Summary:
- This commit adds AR8031 PHY definitions

Impact:
- None

Testing:
- Tested with sabre-6quad:netnsh_ar8031 (will be added later)

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-04-25 11:45:19 +08:00
Zhe Weng 60e66d5e29 net/netdev: Support dedicated thread in upper half driver
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-04-22 01:41:01 +08:00
Huang Qi d6c56e7105 driver/telnet: Remove TELNET_CHARACTER_MODE
If TELNET_CHARACTER_MODE is set, the ECHO must be handled by the telnet server.

So this option is useless. We need a new approach to control the ECHO behavior.

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2023-04-22 01:03:51 +08:00
David Sidrane d05a5d16ee imxrt:Support TJ1103 PHY 2022-11-15 02:27:35 +08:00
Masayuki Ishikawa 9930ad3279 drivers: net: Fix build errors in skeleton.c
Summary:
- This commit fixes build errors in skeleton.c
- Also, add CONFIG_NET_SKELETON to Kconfig and Make.defs

Impact:
- None

Testing:
- Build with sabre-6quad:netnsh (will be updated later)

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-10-07 14:34:03 +08:00
Xiang Xiao 486a6f81d1 drivers/net: Enable NETDEVICES by default
since there are many net drivers doesn't depend on phy

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-01 19:12:15 +02:00
Xiang Xiao 0fa17f32f2 drivers/telnet: Remove io work thread
The thread isn't really needed but complicate the workflow

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-09-30 12:54:29 +09:00
Petro Karashchenko b3cd9090d1 drivers/net: make sure that net driver d_buf is 16-bit aligned
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-08-05 22:21:37 +08:00
Michael Jung 9be3848491 Add driver for WIZnet W5500 Ethernet controller
A device driver based on drivers/net/skeleton.c, which uses the W5500 in
MACRAW mode (i.e. bypassing the integrated protocol stack).

Signed-off-by: Michael Jung <michael.jung@secore.ly>
2022-06-03 13:01:23 +08:00
Xiang Xiao 9785d6606c openamp: Change the dependence from OPENAMP to RPTUN
since all rpmsg driver need the extension api exposed by rptun driver

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-05 10:05:41 +03:00
Petro Karashchenko 51a2db6ffc Kconfig: improve uniformity
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-12-14 07:32:48 -06:00
Michal Lenc 8cf6cfda1a imxrt: Added support for DP83825I PHY
Signed-off-by: Michal Lenc <lencmich@fel.cvut.cz>
2020-11-20 20:34:57 -03:00
YAMAMOTO Takashi f8077022bd Introduce CONFIG_DEFAULT_TASK_STACKSIZE
* The appropriate size of stack varies among archs.
  E.g. for 64-bit sim, 2048 is way too small, especially when the task
  happens to use host OS functionalities.
  I plan to allow an arch provide its own default.

* I plan to use this to replace hardcoded "STACKSIZE = 2048" in APPDIR.
2020-03-26 22:30:13 -05:00
Xiang Xiao cde88cabcc Run codespell -w with the latest dictonary again
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-02-23 22:27:46 +01:00
Gregory Nutt 21aef0dd68 drivers/*/Kconfig: Consolidate driver Kconfig Files.
This commit does two things:

1. First, it reorganizes the driver Kconfig files so that each is self contained.  Before, a part of the driver configuration was in drivers/Kconfig and the rest was in in drivers/xyz/Konfig.  Now, all of the driver configuration is consolitated in the latter.

2. Second, this commit correct numerous serious errors introduced in a previous reorganization of the driver Kconfig files.  This was first noted by Nicholas Chin in PR270 for the case of the drivers/i2c/Kconfig but some examination indicates that the error was introduced into several other Kconfig files as well.

The nature of the introduced error was basically this:

- Nothing must intervene between the menuconfig selection and the following conditional configuration otpions.
- A previous PR erroneously introduced unconditional options between the menuconfig and the following confditional logic, thus corrupting the driver menus.

This error was easy to make because the driver Kconfig files were not well modularized.  Making them fully self-contained should eliminate this kind of error in the future.
2020-02-15 15:19:11 +01:00
Gregory Nutt 10721c0826 Kconfig: Move the ARCH_PHY_INTERRUPT option to net/Kconfig and make it
unconditionally selectable.
2020-02-09 00:55:41 +00:00
Xiang Xiao 3cb259daa6 drivers/Kconfig: Move if/endif to subfolder Kconfig
Move if/endif to subfolder Kconfig and make ARCH_HAVE_XXX option always selectable by moving out of if/endif
2020-02-08 08:04:05 -06:00
Peter van der Perk 513475c11c Kinetis renamed TJA1100 to TJA110X registers 2020-02-07 10:04:48 +01:00