DEV_GPIO_NSIGNALS relies on signal support. Add an explicit Kconfig
dependency on SIGNALS to prevent invalid no-signal configurations.
Signed-off-by: Chengdong Wang <wangchengdong@lixiang.com>
This is an I2C driver for the Awinic AW9523B I/O expander. As well
as the supporting usual digital I/Os, this device features the
ability to drive LEDs directly, and can control the drive current
to each LED individually. The driver was derived from the PCA9555
driver, provides all the standard interfaces of an i/o expander
driver. It also features support for the special features of the
AW9523B through pin direction IOEXPANDER_DIRECTION_OUT_LED and
IOEXPANDER_OPTION_NONGENERIC with AW9523B_OPTION_* options.
The driver has a number of configurable features including interrupt
handling and a shadow register mode based on the PCA9555 driver,
plus new LED/dimming support.
Testing was done using an ESP32S3 host and I2C connection to the
Adafruit AW9523 breakout board.
Signed-off-by: Zik Saleeba <zik@zikzak.net>
There might be multiple expanders, one with interrupt used and other
without. This commit fixes initial incorrect interrupt design by
introducing ICJX_INT_ENABLE config option.
Also fixes naming of ICJX_MULTIPLE option.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This commit adds basic support for iC-JX expander in SPI mode. The
expander is functional and supports both input and output pins. Further
expander functionalities (filtering, adc, interrupt support) are not
yet implemented.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This commit adds basic support for electrically isolated 8 bit expander.
The expander communicates with the MCU via SPI interface. Both single
and multiple pin read are supported.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This commit adds support for galvanic isolated ISO1H812G SPI expander.
Both single pin and multiple pin writes are supported.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This adds support for 16 bit io expander pcf8575. The driver is basically
the same as for pcf8574 however it is for 16 bits instead of 8 bits. Since
pcf8575 and pcf8574 can be both used on the same i2c bus the driver for
pcf8575 is implemented in a different file to reduce the code size
and complexity and to have less if statements in the driver.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
drivers/ioexpander/Kconfig:28:
warning:
config symbol 'IOEXPANDER_RPMSG_INT_NCALLBACKS' uses select, but is not boolean or tristate
Signed-off-by: chao.an <anchao@xiaomi.com>
driver/ioexpander: Add gpio_pin_unregister function to GPIO driver
driver/ioexpander: Add pinset struct to GPIO driver for interrupt pins larger than 64
driver/ioexpander: Initialize pintype/inttype when registering ioexpander device
driver/ioexpander: Add SETPINTYPE ioctl command to the GPIO driver
The same interrupt handler is entered with the device structure parameter in all situations,
multiple or single PCA. One should still be careful if multiple PCA devices share the same IRQ.
PCA9555 Driver: Replace the signalling logic with a simple callback using the new definitons of ioexpander.h. This repartitioning of functionality is necessary because (1) the I/O expander driver is the lower-lower part of any driver that uses GPIOs (include the GPIO driver itself) and should not be interacting directly with the much higher level application layer. And (2) in order to be compatible with the GPIO driver (and any arbitrary upper half driver), the PCA9555 should not directly signal, but should call back into the upper half. The upper half driver that interacts directly with the application is the appropriate place to be generating signal.
are held in the microcontrollers memory and only written to the IO-Expander.
This reduces bus traffic and is more error-proof than the normal read-
modify-write operation.
Retry Mode: If enabled and an error occurs while writing to the IO-Expander the
current transmission is automatically repeated once.
-headers in nuttx/ioexpander to define the "generic" ioexpander framework
-files in drivers/ioexpander for the implementation of the NXP PCA9555 framework
-bindings in drivers/Kconfig and drivers/Makefile
From Sebastien Lorquet
wangchengdong
Zik Saleeba
wangjianyu3
dongjiuzhu1
Michal Lenc
Bowen Wang
raiden00pl
Alan Carvalho de Assis
jturnsek
Xiang Xiao
chao.an
zhuyanlin
Nicholas Chin
zhuyanlin
Sebastien Lorquet
Gregory Nutt
Michael Spahlinger