Mirrors_Framework/nuttx
1
0
Fork 0
mirror of https://github.com/apache/nuttx.git synced 2026-06-06 08:36:24 +08:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity

Merge branch 'master' into l432kc

Browse Source
This commit is contained in:
Sebastien Lorquet
2017-05-09 08:42:13 +02:00
parent c597202ac7 407fed41ef
commit ff4f5fdba2
134 changed files with 22012 additions and 2707 deletions
Download Patch File Download Diff File Expand all files Collapse all files
configs/Kconfig
+13
View File
@@ -810,6 +810,15 @@ config ARCH_BOARD_NUCLEO_F411RE
This is a minimal configuration that supports low-level test of the
Nucleo F411RE in the NuttX source tree.
config ARCH_BOARD_NUCLEO_L452RE
bool "STM32L452 Nucleo L452RE"
depends on ARCH_CHIP_STM32L452RE
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
STMicro Nucleo L452RE board based on the STMicro STM32L452RET6 MCU.
config ARCH_BOARD_NUCLEO_L476RG
bool "STM32L476 Nucleo L476RG"
depends on ARCH_CHIP_STM32L476RG
@@ -1557,6 +1566,7 @@ config ARCH_BOARD
default "nucleo-f303re" if ARCH_BOARD_NUCLEO_F303RE
default "nucleo-f334r8" if ARCH_BOARD_NUCLEO_F334R8
default "nucleo-f4x1re" if ARCH_BOARD_NUCLEO_F401RE || ARCH_BOARD_NUCLEO_F411RE
default "nucleo-l452re" if ARCH_BOARD_NUCLEO_L452RE
default "nucleo-l476rg" if ARCH_BOARD_NUCLEO_L476RG
default "nucleo-l496zg" if ARCH_BOARD_NUCLEO_L496ZG
default "qemu-i486" if ARCH_BOARD_QEMU_I486
@@ -1876,6 +1886,9 @@ endif
if ARCH_BOARD_NUCLEO_F401RE || ARCH_BOARD_NUCLEO_F411RE
source "configs/nucleo-f4x1re/Kconfig"
endif
if ARCH_BOARD_NUCLEO_L452RE
source "configs/nucleo-l452re/Kconfig"
endif
if ARCH_BOARD_NUCLEO_L476RG
source "configs/nucleo-l476rg/Kconfig"
endif
configs/clicker2-stm32/Kconfig
+16
View File
@@ -19,4 +19,20 @@ config CLICKER2_STM32_MB2_SPI
---help---
Enable SPI support on mikroBUS1 (STM32 SPI2)
config CLICKER2_STM32_MB1_BEE
bool "mikroBUS1 MRF24J40 BEE"
default y
depends on IEEE802154_MRF24J40
select CLICKER2_STM32_MB1_SPI
---help---
Enable support for MRF24J40 BEE on mikroBUS1
config CLICKER2_STM32_MB2_BEE
bool "mikroBUS2 MRF24J40 BEE"
default n
depends on IEEE802154_MRF24J40
select CLICKER2_STM32_MB2_SPI
---help---
Enable support for MRF24J40 BEE on mikroBUS2
endif # ARCH_BOARD_CLICKER2_STM32
configs/clicker2-stm32/README.txt
+42
View File
@@ -304,6 +304,48 @@ Configurations
If you do this a lot, you will probably want to invest a little time
to develop a tool to automate these steps.
mrf24j40-radio
This is a version of nsh that was used for testing the MRF24J40 be as a
character device. The most important configuration differences are
summarized below:
1. Support for the BEE click and SPI are in enabled in the mikroBUS1 slot:
CONFIG_CLICKER2_STM32_MB1_BEE=y
CONFIG_CLICKER2_STM32_MB1_SPI=y
2. SPI support and STM32 SPI3, in particular, are enabled:
CONFIG_SPI=y
CONFIG_SPI_EXCHANGE=y
CONFIG_STM32_SPI=y
CONFIG_STM32_SPI3=y
4. Support for the IEEE802.15.4 "upper half" character driver is enabled:
CONFIG_WIRELESS=y
CONFIG_WIRELESS_IEEE802154=y
CONFIG_IEEE802154_DEV=y
5. Support for the lower half MRF24J40 character driver is enabled
CONFIG_DRIVERS_WIRELESS=y
CONFIG_DRIVERS_IEEE802154=y
CONFIG_IEEE802154_MRF24J40=y
6. Support for the test program at apps/ieee802154 is enabled:
CONFIG_IEEE802154_COMMON=y
CONFIG_IEEE802154_COORD=y
CONFIG_IEEE802154_I8SAK=y
7. Initialization hooks are provided to enable the MRF24J40 and to
register the radio character driver.
CONFIG_NSH_ARCHINIT=y
nsh:
Configures the NuttShell (nsh) located at examples/nsh. This
configs/clicker2-stm32/mrf24j40-radio/Make.defs
+122
View File
@@ -0,0 +1,122 @@
############################################################################
# configs/clicker2-stm32/mrf24j40-radio/Make.defs
#
# Copyright (C) 2017 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
LDSCRIPT = flash.ld
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mkwindeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
endif
ifneq ($(CONFIG_DEBUG_NOOPT),y)
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
# Loadable module definitions
CMODULEFLAGS = $(CFLAGS) -mlong-calls # --target1-abs
LDMODULEFLAGS = -r -e module_initialize
ifeq ($(WINTOOL),y)
LDMODULEFLAGS += -T "${shell cygpath -w $(TOPDIR)/libc/modlib/gnu-elf.ld}"
else
LDMODULEFLAGS += -T $(TOPDIR)/libc/modlib/gnu-elf.ld
endif
ASMEXT = .S
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
HOSTLDFLAGS =
configs/clicker2-stm32/mrf24j40-radio/defconfig
+1355
View File
File diff suppressed because it is too large Load Diff
configs/clicker2-stm32/src/Makefile
+4
View File
@@ -56,6 +56,10 @@ ifeq ($(CONFIG_LIB_BOARDCTL),y)
CSRCS += stm32_appinit.c
endif
ifeq ($(CONFIG_IEEE802154_MRF24J40),y)
CSRCS += stm32_mrf24j40.c
endif
ifeq ($(CONFIG_ADC),y)
CSRCS += stm32_adc.c
endif
configs/clicker2-stm32/src/clicker2-stm32.h
+16
View File
@@ -297,5 +297,21 @@ int stm32_adc_setup(void);
int stm32_can_setup(void);
#endif
/****************************************************************************
* Name: stm32_mrf24j40_initialize
*
* Description:
* Initialize the MRF24J40 device.
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
#if defined(CONFIG_CLICKER2_STM32_MB1_BEE) || defined(CONFIG_CLICKER2_STM32_MB2_BEE)
int stm32_mrf24j40_initialize(void);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_CLICKER2_STM32_SRC_CLICKER2_H */
configs/clicker2-stm32/src/stm32_bringup.c
+10
View File
@@ -153,6 +153,16 @@ int stm32_bringup(void)
}
#endif
#if defined(CONFIG_CLICKER2_STM32_MB1_BEE) || defined(CONFIG_CLICKER2_STM32_MB2_BEE)
/* Configure MRF24J40 wireless */
ret = stm32_mrf24j40_initialize();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_mrf24j40_initialize() failed: %d\n", ret);
}
#endif
#ifdef CONFIG_BUTTONS
/* Register the BUTTON driver */
configs/clicker2-stm32/src/stm32_buttons.c
+1
View File
@@ -47,6 +47,7 @@
#include <arch/board/board.h>
#include "stm32_gpio.h"
#include "stm32_exti.h"
#include "clicker2-stm32.h"
configs/clicker2-stm32/src/stm32_mrf24j40.c
+336
View File
@@ -0,0 +1,336 @@
/****************************************************************************
* configs/freedom-kl25z/src/stm32_mrf24j40.c
*
* Copyright (C) 2017 Gregory Nutt, All rights reserver
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <stdint.h>
#include <errno.h>
#include <assert.h>
#include <debug.h>
#include <nuttx/arch.h>
#include <nuttx/fs/fs.h>
#include <nuttx/wireless/ieee802154/ieee802154_mac.h>
#include <nuttx/wireless/ieee802154/mrf24j40.h>
#include "stm32_gpio.h"
#include "stm32_exti.h"
#include "stm32_spi.h"
#include "clicker2-stm32.h"
#ifdef CONFIG_IEEE802154_MRF24J40
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifndef CONFIG_DRIVERS_WIRELESS
# error Wireless support requires CONFIG_DRIVERS_WIRELESS
#endif
#if !defined(CONFIG_CLICKER2_STM32_MB1_BEE) && \
!defined(CONFIG_CLICKER2_STM32_MB2_BEE)
# error Only the Mikroe BEE board is supported
#endif
#ifdef CONFIG_CLICKER2_STM32_MB1_BEE
# ifndef CONFIG_STM32_SPI3
# error Mikroe BEE on mikroBUS1 requires CONFIG_STM32_SPI3
# endif
#endif
#ifdef CONFIG_CLICKER2_STM32_MB2_BEE
# ifndef CONFIG_STM32_SPI2
# error Mikroe BEE on mikroBUS1 requires CONFIG_STM32_SPI2
# endif
#endif
/****************************************************************************
* Private Types
****************************************************************************/
struct stm32_priv_s
{
struct mrf24j40_lower_s dev;
xcpt_t handler;
FAR void *arg;
uint32_t intcfg;
uint8_t spidev;
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* IRQ/GPIO access callbacks. These operations all hidden behind callbacks
* to isolate the MRF24J40 driver from differences in GPIO interrupt handling
* varying boards and MCUs.
*
* irq_attach - Attach the MRF24J40 interrupt handler to the GPIO
interrupt
* irq_enable - Enable or disable the GPIO interrupt
*/
static int stm32_attach_irq(FAR const struct mrf24j40_lower_s *lower,
xcpt_t handler, FAR void *arg);
static void stm32_enable_irq(FAR const struct mrf24j40_lower_s *lower,
bool state);
static int stm32_mrf24j40_devsetup(FAR struct stm32_priv_s *priv);
/****************************************************************************
* Private Data
****************************************************************************/
/* A reference to a structure of this type must be passed to the MRF24J40
* driver. This structure provides information about the configuration
* of the MRF24J40 and provides some board-specific hooks.
*
* Memory for this structure is provided by the caller. It is not copied
* by the driver and is presumed to persist while the driver is active. The
* memory must be writable because, under certain circumstances, the driver
* may modify frequency or X plate resistance values.
*/
#ifdef CONFIG_CLICKER2_STM32_MB1_BEE
static struct stm32_priv_s g_mrf24j40_mb1_priv =
{
.dev.attach = stm32_attach_irq,
.dev.enable = stm32_enable_irq,
.handler = NULL,
.intcfg = GPIO_MB1_INT,
.spidev = 3,
};
#endif
#ifdef CONFIG_CLICKER2_STM32_MB2_BEE
static struct stm32_priv_s g_mrf24j40_mb2_priv =
{
.dev.attach = stm32_attach_irq,
.dev.enable = stm32_enable_irq,
.uint32_t = GPIO_MB2_INT,
.spidev = 2,
};
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/* IRQ/GPIO access callbacks. These operations all hidden behind
* callbacks to isolate the MRF24J40 driver from differences in GPIO
* interrupt handling by varying boards and MCUs. If possible,
* interrupts should be configured on both rising and falling edges
* so that contact and loss-of-contact events can be detected.
*
* irq_attach - Attach the MRF24J40 interrupt handler to the GPIO
* interrupt
* irq_enable - Enable or disable the GPIO interrupt
*/
static int stm32_attach_irq(FAR const struct mrf24j40_lower_s *lower,
xcpt_t handler, FAR void *arg)
{
FAR struct stm32_priv_s *priv = (FAR struct stm32_priv_s *)lower;
DEBUGASSERT(priv != NULL);
/* Just save the handler for use when the interrupt is enabled */
priv->handler = handler;
priv->arg = arg;
return OK;
}
static void stm32_enable_irq(FAR const struct mrf24j40_lower_s *lower,
bool state)
{
FAR struct stm32_priv_s *priv = (FAR struct stm32_priv_s *)lower;
/* The caller should not attempt to enable interrupts if the handler
* has not yet been 'attached'
*/
DEBUGASSERT(priv != NULL && (priv->handler != NULL || !state));
/* Attach and enable, or detach and disable */
wlinfo("state:%d\n", (int)state);
if (state)
{
(void)stm32_gpiosetevent(priv->intcfg, true, true, true,
priv->handler, priv->arg);
}
else
{
(void)stm32_gpiosetevent(priv->intcfg, false, false, false,
NULL, NULL);
}
}
/****************************************************************************
* Name: stm32_mrf24j40_devsetup
*
* Description:
* Initialize one the MRF24J40 device in one mikroBUS slot
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
static int stm32_mrf24j40_devsetup(FAR struct stm32_priv_s *priv)
{
FAR struct ieee802154_radio_s *radio;
#ifdef CONFIG_IEEE802154_MAC
MACHANDLE mac;
#endif
FAR struct spi_dev_s *spi;
int ret;
/* Configure the interrupt pin */
stm32_configgpio(priv->intcfg);
/* Initialize the SPI bus and get an instance of the SPI interface */
spi = stm32_spibus_initialize(priv->spidev);
if (spi == NULL)
{
wlerr("ERROR: Failed to initialize SPI bus %d\n", priv->spidev);
return -ENODEV;
}
/* Initialize and register the SPI MRF24J40 device */
radio = mrf24j40_init(spi, &priv->dev);
if (radio == NULL)
{
wlerr("ERROR: Failed to initialize SPI bus %d\n", priv->spidev);
return -ENODEV;
}
#if defined(CONFIG_IEEE802154_MAC)
/* Create a 802.15.4 MAC device from a 802.15.4 compatible radio device. */
mac = mac802154_create(radio);
if (mac == NULL)
{
wlerr("ERROR: Failed to initialize IEEE802.15.4 MAC\n");
return -ENODEV;
}
#if defined(CONFIG_IEEE802154_NETDEV)
/* Use the IEEE802.15.4 MAC interface instance to create a 6loWPAN
* network interface by wrapping the MAC intrface instance in a
* network device driver via mac802154dev_register().
*/
ret = mac802154netdev_register(mac);
if (ret < 0)
{
wlerr("ERROR: Failed to register the MAC network driver wpan%d: %d\n",
0, ret);
return ret;
}
#elif defined(CONFIG_IEEE802154_MAC_DEV)
/* If want to call these APIs from userspace, you have to wrap the MAC
* interface in a character device viamac802154dev_register().
*/
ret = mac802154dev_register(mac, 0);
if (ret < 0)
{
wlerr("ERROR: Failed to register the MAC character driver /dev/ieee%d: %d\n",
0, ret);
return ret;
}
#endif
#endif /* CONFIG_IEEE802154_MAC */
return OK;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: stm32_mrf24j40_initialize
*
* Description:
* Initialize the MRF24J40 device.
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
int stm32_mrf24j40_initialize(void)
{
int ret;
#ifdef CONFIG_CLICKER2_STM32_MB1_BEE
wlinfo("Configuring BEE in mikroBUS1\n");
ret = stm32_mrf24j40_devsetup(&g_mrf24j40_mb1_priv);
if (ret < 0)
{
wlerr("ERROR: Failed to initialize BD in mikroBUS1: %d\n", ret);
}
#endif
#ifdef CONFIG_CLICKER2_STM32_MB2_BEE
wlinfo("Configuring BEE in mikroBUS2\n");
ret = stm32_mrf24j40_devsetup(&g_mrf24j40_mb2_priv);
if (ret < 0)
{
wlerr("ERROR: Failed to initialize BD in mikroBUS2: %d\n", ret);
}
#endif
UNUSED(ret);
return OK;
}
#endif /* CONFIG_IEEE802154_MRF24J40 */
configs/freedom-kl25z/include/kl_cc3000.h
+2 -3
View File
@@ -70,9 +70,8 @@ void WriteWlanEnablePin(uint8_t val);
void AssertWlanCS(void);
/*
* Deassert CC3000 CS
*/
/* Deassert CC3000 CS */
void DeassertWlanCS(void);
/* Setup needed pins */
configs/nucleo-144/Kconfig
+1 -1
View File
@@ -7,7 +7,7 @@ if ARCH_BOARD_NUCLEO_144
choice
prompt "Select Console wiring."
default NUCLEO_ARDUINO
default NUCLEO_CONSOLE_ARDUINO
---help---
Select where you will connect the console.
configs/nucleo-l452re/Kconfig
+8
View File
@@ -0,0 +1,8 @@
#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#
if ARCH_BOARD_NUCLEO_L452RE
endif
configs/nucleo-l452re/README.txt
+271
View File
@@ -0,0 +1,271 @@
Nucleo-L452RE README
====================
This README file discusses the port of NuttX to the STMicro Nucleo-L452RE
board. That board features the STM32L452RET6 MCU with 512KiB of FLASH
and 160KiB of SRAM.
Contents
========
- Status
- Nucleo-64 Boards
- LEDs
- Buttons
- Serial Console
- Configurations
Status
======
2017-05-04: The board now boots and the basic NSH configurations works
without problem.
Nucleo-64 Boards
================
The Nucleo-L452RE is a member of the Nucleo-64 board family. The Nucleo-64
is a standard board for use with several STM32 parts in the LQFP64 package.
Variants including:
Order code Targeted STM32
------------- --------------
NUCLEO-F030R8 STM32F030R8T6
NUCLEO-F070RB STM32F070RBT6
NUCLEO-F072RB STM32F072RBT6
NUCLEO-F091RC STM32F091RCT6
NUCLEO-F103RB STM32F103RBT6
NUCLEO-F302R8 STM32F302R8T6
NUCLEO-F303RE STM32F303RET6
NUCLEO-F334R8 STM32F334R8T6
NUCLEO-F401RE STM32F401RET6
NUCLEO-F410RB STM32F410RBT6
NUCLEO-F411RE STM32F411RET6
NUCLEO-F446RE STM32F446RET6
NUCLEO-L053R8 STM32L053R8T6
NUCLEO-L073RZ STM32L073RZT6
NUCLEO-L152RE STM32L152RET6
NUCLEO-L452RE STM32L452RET6
NUCLEO-L476RG STM32L476RGT6
LEDs
====
The Nucleo-64 board has one user controlable LED, User LD2. This green
LED is a user LED connected to Arduino signal D13 corresponding to STM32
I/O PA5 (PB13 on other some other Nucleo-64 boards).
- When the I/O is HIGH value, the LED is on
- When the I/O is LOW, the LED is off
These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
defined. In that case, the usage by the board port is defined in
include/board.h and src/stm32_autoleds.c. The LEDs are used to encode
OS-related events as follows when the red LED (PE24) is available:
SYMBOL Meaning LD2
------------------- ----------------------- -----------
LED_STARTED NuttX has been started OFF
LED_HEAPALLOCATE Heap has been allocated OFF
LED_IRQSENABLED Interrupts enabled OFF
LED_STACKCREATED Idle stack created ON
LED_INIRQ In an interrupt No change
LED_SIGNAL In a signal handler No change
LED_ASSERTION An assertion failed No change
LED_PANIC The system has crashed Blinking
LED_IDLE MCU is is sleep mode Not used
Thus if LD2, NuttX has successfully booted and is, apparently, running
normally. If LD2 is flashing at approximately 2Hz, then a fatal error
has been detected and the system has halted.
Buttons
=======
B1 USER: the user button is connected to the I/O PC13 (pin 2) of the STM32
microcontroller.
Serial Console
==============
USART1
------
Pins and Connectors:
RXD: PA10 D3 CN9 pin 3, CN10 pin 33
PB7 CN7 pin 21
TXD: PA9 D8 CN5 pin 1, CN10 pin 21
PB6 D10 CN5 pin 3, CN10 pin 17
NOTE: You may need to edit the include/board.h to select different USART1
pin selections.
TTL to RS-232 converter connection:
Nucleo CN10 STM32F072RB
----------- ------------
Pin 21 PA9 USART1_TX *Warning you make need to reverse RX/TX on
Pin 33 PA10 USART1_RX some RS-232 converters
Pin 20 GND
Pin 8 U5V
To configure USART1 as the console:
CONFIG_STM32_USART1=y
CONFIG_USART1_SERIALDRIVER=y
CONFIG_USART1_SERIAL_CONSOLE=y
CONFIG_USART1_RXBUFSIZE=256
CONFIG_USART1_TXBUFSIZE=256
CONFIG_USART1_BAUD=115200
CONFIG_USART1_BITS=8
CONFIG_USART1_PARITY=0
CONFIG_USART1_2STOP=0
USART2
------
Pins and Connectors:
RXD: PA3 To be provided
PA15
PD6
TXD: PA2
PA14
PD5
See "Virtual COM Port" and "RS-232 Shield" below.
USART3
------
Pins and Connectors:
RXD: PB11 To be provided
PC5
PC11
D9
TXD: PB10
PC4
PC10
D8
USART3
------
Pins and Connectors:
RXD: PA1 To be provided
PC11
TXD: PA0
PC10
Virtual COM Port
----------------
Yet another option is to use UART2 and the USB virtual COM port. This
option may be more convenient for long term development, but is painful
to use during board bring-up.
Solder Bridges. This configuration requires:
- SB62 and SB63 Open: PA2 and PA3 on STM32 MCU are disconnected to D1
and D0 (pin 7 and pin 8) on Arduino connector CN9 and ST Morpho
connector CN10.
- SB13 and SB14 Closed: PA2 and PA3 on STM32F103C8T6 (ST-LINK MCU) are
connected to PA3 and PA2 on STM32 MCU to have USART communication
between them. Thus SB61, SB62 and SB63 should be OFF.
Configuring USART2 is the same as given above.
115200 8N1 BAUD should be configure to interface with the Virtual COM
port.
Default
-------
As shipped, SB62 and SB63 are open and SB13 and SB14 closed, so the
virtual COM port is enabled.
RS-232 Shield
-------------
Supports a single RS-232 connected via
Nucleo STM32F4x1RE Shield
--------- --------------- --------
CN9 Pin 1 PA3 USART2_RXD RXD
CN9 Pin 2 PA2 USART2_TXD TXD
Support for this shield is enabled by selecting USART2 and configuring
SB13, 14, 62, and 63 as described above under "Virtual COM Port"
Configurations
==============
Information Common to All Configurations
----------------------------------------
Each configuration is maintained in a sub-directory and can be
selected as follow:
cd tools
./configure.sh nucleo-l452re/<subdir>
cd -
Before building, make sure the PATH environment variable includes the
correct path to the directory than holds your toolchain binaries.
And then build NuttX by simply typing the following. At the conclusion of
the make, the nuttx binary will reside in an ELF file called, simply, nuttx.
make oldconfig
make
The <subdir> that is provided above as an argument to the tools/configure.sh
must be is one of the following.
NOTES:
1. These configurations use the mconf-based configuration tool. To
change any of these configurations using that tool, you should:
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
see additional README.txt files in the NuttX tools repository.
b. Execute 'make menuconfig' in nuttx/ in order to start the
reconfiguration process.
2. Unless stated otherwise, all configurations generate console
output on USART2, as described above under "Serial Console". The
elevant configuration settings are listed below:
CONFIG_STM32_USART2=y
CONFIG_STM32_USART2_SERIALDRIVER=y
CONFIG_STM32_USART=y
CONFIG_USART2_SERIALDRIVER=y
CONFIG_USART2_SERIAL_CONSOLE=y
CONFIG_USART2_RXBUFSIZE=256
CONFIG_USART2_TXBUFSIZE=256
CONFIG_USART2_BAUD=115200
CONFIG_USART2_BITS=8
CONFIG_USART2_PARITY=0
CONFIG_USART2_2STOP=0
3. All of these configurations are set up to build under Linux using the
"GNU Tools for ARM Embedded Processors" that is maintained by ARM
(unless stated otherwise in the description of the configuration).
https://launchpad.net/gcc-arm-embedded
That toolchain selection can easily be reconfigured using
'make menuconfig'. Here are the relevant current settings:
Build Setup:
CONFIG_HOST_LINUX=y : Linux environment
System Type -> Toolchain:
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y : GNU ARM EABI toolchain
Configuration sub-directories
-----------------------------
nsh:
Configures the NuttShell (nsh) located at examples/nsh. This
configuration is focused on low level, command-line driver testing.
configs/nucleo-l452re/include/board.h
+272
View File
@@ -0,0 +1,272 @@
/************************************************************************************
* configs/nucleo-l452re/include/board.h
*
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_NUCLEO_L452RE_INCLUDE_BOARD_H
#define __CONFIGS_NUCLEO_L452RE_INCLUDE_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
#include <stm32l4.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Clocking *************************************************************************/
#if defined(CONFIG_ARCH_CHIP_STM32L452RE)
# include <arch/board/nucleo-l452re.h>
#endif
/* DMA Channel/Stream Selections ****************************************************/
/* Stream selections are arbitrary for now but might become important in the future
* is we set aside more DMA channels/streams.
*/
/* Values defined in arch/arm/src/stm32l4/chip/stm32l4x3xx_dma.h */
#define DMACHAN_SDMMC DMACHAN_SDMMC_1 /* 2 choices */
#define DMACHAN_SPI1_RX DMACHAN_SPI1_RX_1 /* 2 choices */
#define DMACHAN_SPI1_TX DMACHAN_SPI1_TX_1 /* 2 choices */
/* UART RX DMA configurations */
#define DMACHAN_USART1_RX DMACHAN_USART1_RX_2
/* Alternate function pin selections ************************************************/
/* USART1:
* RXD: PA10 CN9 pin 3, CN10 pin 33
* PB7 CN7 pin 21
* TXD: PA9 CN5 pin 1, CN10 pin 21
* PB6 CN5 pin 3, CN10 pin 17
*/
#if 1
# define GPIO_USART1_RX GPIO_USART1_RX_1 /* PA10 */
# define GPIO_USART1_TX GPIO_USART1_TX_1 /* PA9 */
#else
# define GPIO_USART1_RX GPIO_USART1_RX_2 /* PB7 */
# define GPIO_USART1_TX GPIO_USART1_TX_2 /* PB6 */
#endif
/* USART2: Connected to STLink Debug via PA2, PA3
* RXD: PA3 CN9 pin 1 (See SB13, 14, 62, 63). CN10 pin 37
* PD6
* TXD: PA2 CN9 pin 2 (See SB13, 14, 62, 63). CN10 pin 35
* PD5
*/
#define GPIO_USART2_RX GPIO_USART2_RX_1 /* PA3 */
#define GPIO_USART2_TX GPIO_USART2_TX_1 /* PA2 */
#define GPIO_USART2_RTS GPIO_USART2_RTS_2
#define GPIO_USART2_CTS GPIO_USART2_CTS_2
#define GPIO_USART3_RX GPIO_USART3_RX_3 /* PC11 */
#define GPIO_USART3_TX GPIO_USART3_TX_3 /* PC10 */
#define GPIO_UART4_RX GPIO_UART4_RX_1 /* PA1 */
#define GPIO_UART4_TX GPIO_UART4_TX_1 /* PA0 */
/* I2C
*
* The optional _GPIO configurations allow the I2C driver to manually
* reset the bus to clear stuck slaves. They match the pin configuration,
* but are normally-high GPIOs.
*/
#define GPIO_I2C1_SCL \
(GPIO_I2C1_SCL_2 | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET)
#define GPIO_I2C1_SDA \
(GPIO_I2C1_SDA_2 | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET)
#define GPIO_I2C1_SCL_GPIO \
(GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | \
GPIO_PORTB | GPIO_PIN8)
#define GPIO_I2C1_SDA_GPIO \
(GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | \
GPIO_PORTB | GPIO_PIN9)
#define GPIO_I2C2_SCL \
(GPIO_I2C2_SCL_1 | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET)
#define GPIO_I2C2_SDA \
(GPIO_I2C2_SDA_1 | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET)
#define GPIO_I2C2_SCL_GPIO \
(GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | \
GPIO_PORTB | GPIO_PIN10)
#define GPIO_I2C2_SDA_GPIO \
(GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | \
GPIO_PORTB | GPIO_PIN11)
/* SPI */
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1
#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1
#define GPIO_SPI2_MISO GPIO_SPI2_MISO_1
#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_1
#define GPIO_SPI2_SCK GPIO_SPI2_SCK_2
/* LEDs
*
* The Nucleo L452RE board provides a single user LED, LD2. LD2
* is the green LED connected to Arduino signal D13 corresponding to MCU I/O
* PA5 (pin 21) or PB13 (pin 34) depending on the STM32 target.
*
* - When the I/O is HIGH value, the LED is on.
* - When the I/O is LOW, the LED is off.
*/
/* LED index values for use with board_userled() */
#define BOARD_LD2 0
#define BOARD_NLEDS 1
/* LED bits for use with board_userled_all() */
#define BOARD_LD2_BIT (1 << BOARD_LD2)
/* These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
* defined. In that case, the usage by the board port is defined in
* include/board.h and src/stm32_autoleds.c. The LEDs are used to encode
* OS-related events as follows when the red LED (PE24) is available:
*
* SYMBOL Meaning LD2
* ------------------- ----------------------- -----------
* LED_STARTED NuttX has been started OFF
* LED_HEAPALLOCATE Heap has been allocated OFF
* LED_IRQSENABLED Interrupts enabled OFF
* LED_STACKCREATED Idle stack created ON
* LED_INIRQ In an interrupt No change
* LED_SIGNAL In a signal handler No change
* LED_ASSERTION An assertion failed No change
* LED_PANIC The system has crashed Blinking
* LED_IDLE MCU is is sleep mode Not used
*
* Thus if LD2, NuttX has successfully booted and is, apparently, running
* normally. If LD2 is flashing at approximately 2Hz, then a fatal error
* has been detected and the system has halted.
*/
#define LED_STARTED 0
#define LED_HEAPALLOCATE 0
#define LED_IRQSENABLED 0
#define LED_STACKCREATED 1
#define LED_INIRQ 1
#define LED_SIGNAL 2
#define LED_ASSERTION 2
#define LED_PANIC 1
/* Buttons
*
* B1 USER: the user button is connected to the I/O PC13 (pin 2) of the STM32
* microcontroller.
*/
#define BUTTON_USER 0
#define NUM_BUTTONS 1
#define BUTTON_USER_BIT (1 << BUTTON_USER)
/* Quadrature encoder
* Default is to use timer 5 (32-bit) and encoder on PA0/PA1
*/
#define GPIO_TIM2_CH1IN GPIO_TIM2_CH1IN_1
#define GPIO_TIM2_CH2IN GPIO_TIM2_CH2IN_1
#define GPIO_TIM3_CH1IN GPIO_TIM3_CH1IN_3
#define GPIO_TIM3_CH2IN GPIO_TIM3_CH2IN_3
#define GPIO_TIM5_CH1IN GPIO_TIM5_CH1IN_1
#define GPIO_TIM5_CH2IN GPIO_TIM5_CH2IN_1
/* PWM output for full bridge, uses config 1, because port E is N/A on QFP64
* CH1 | 1(A8) 2(E9)
* CH2 | 1(A9) 2(E11)
* CHN1 | 1(A7) 2(B13) 3(E8)
* CHN2 | 1(B0) 2(B14) 3(E10)
*/
#define GPIO_TIM1_CH1OUT GPIO_TIM1_CH1OUT_1
#define GPIO_TIM1_CH1NOUT GPIO_TIM1_CH1N_1
#define GPIO_TIM1_CH2OUT GPIO_TIM1_CH2OUT_1
#define GPIO_TIM1_CH2NOUT GPIO_TIM1_CH2N_1
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: stm32l4_boardinitialize
*
* Description:
* All STM32L4 architectures must provide the following entry point. This entry point
* is called early in the initialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void stm32l4_boardinitialize(void);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_NUCLEO_L452RE_INCLUDE_BOARD_H */
configs/nucleo-l452re/include/nucleo-l452re.h
+510
View File
File diff suppressed because it is too large Load Diff
configs/nucleo-l452re/nsh/Make.defs
+112
View File
@@ -0,0 +1,112 @@
############################################################################
# configs/nucleo-l452re/nsh/Make.defs
#
# Copyright (C) 2014 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
LDSCRIPT = l452re-flash.ld
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
endif
ifneq ($(CONFIG_DEBUG_NOOPT),y)
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
ASMEXT = .S
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
HOSTLDFLAGS =
configs/nucleo-l452re/nsh/defconfig
+1258
View File
File diff suppressed because it is too large Load Diff
configs/nucleo-l452re/scripts/l452re-flash.ld
+119
View File
@@ -0,0 +1,119 @@
/****************************************************************************
* configs/nucleo-l452re/scripts/l452re-flash.ld
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* Sebastien Lorquet <sebastien@lorquet.fr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32L452RE has 512Kb of FLASH beginning at address 0x0800:0000 and
* 160Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH,
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
* begin execution by jumping to the entry point in the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 160K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
.init_section : {
_sinit = ABSOLUTE(.);
*(.init_array .init_array.*)
_einit = ABSOLUTE(.);
} > flash
.ARM.extab : {
*(.ARM.extab*)
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
/* The STM32L452RE has 160Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}
configs/nucleo-l452re/src/.gitignore
+2
View File
@@ -0,0 +1,2 @@
/.depend
/Make.dep
configs/nucleo-l452re/src/Makefile
+56
View File
@@ -0,0 +1,56 @@
############################################################################
# configs/nucleo-l452re/src/Makefile
#
# Copyright (C) 2017 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
# Alan Carvalho de Assis <acassis@gmail.com>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
-include $(TOPDIR)/Make.defs
ASRCS =
CSRCS = stm32_boot.c stm32_bringup.c stm32_spi.c
ifeq ($(CONFIG_ARCH_LEDS),y)
CSRCS += stm32_autoleds.c
else
CSRCS += stm32_userleds.c
endif
ifeq ($(CONFIG_ARCH_BUTTONS),y)
CSRCS += stm32_buttons.c
endif
ifeq ($(CONFIG_LIB_BOARDCTL),y)
CSRCS += stm32_appinit.c
endif
include $(TOPDIR)/configs/Board.mk
configs/nucleo-l452re/src/nucleo-l452re.h
+149
View File
@@ -0,0 +1,149 @@
/****************************************************************************
* configs/nucleo-l452re/src/nucleo-l452re.h
*
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* Alan Carvalho de Assis <acassis@gmail.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __CONFIGS_NUCLEO_L452RE_SRC_NUCLEO_L452RE_H
#define __CONFIGS_NUCLEO_L452RE_SRC_NUCLEO_L452RE_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
#include "stm32l4_gpio.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#define HAVE_PROC 1
#define HAVE_RTC_DRIVER 1
#define HAVE_MMCSD 1
#if !defined(CONFIG_FS_PROCFS)
# undef HAVE_PROC
#endif
#if defined(HAVE_PROC) && defined(CONFIG_DISABLE_MOUNTPOINT)
# warning Mountpoints disabled. No procfs support
# undef HAVE_PROC
#endif
/* Check if we can support the RTC driver */
#if !defined(CONFIG_RTC) || !defined(CONFIG_RTC_DRIVER)
# undef HAVE_RTC_DRIVER
#endif
#if !defined(CONFIG_STM32L4_SDIO) || !defined(CONFIG_MMCSD) || \
!defined(CONFIG_MMCSD_SDIO)
# undef HAVE_MMCSD
#endif
/* How many SPI modules does this chip support? */
#if STM32L4_NSPI < 1
# undef CONFIG_STM32L4_SPI1
# undef CONFIG_STM32L4_SPI2
# undef CONFIG_STM32L4_SPI3
#elif STM32L4_NSPI < 2
# undef CONFIG_STM32L4_SPI2
# undef CONFIG_STM32L4_SPI3
#elif STM32L4_NSPI < 3
# undef CONFIG_STM32L4_SPI3
#endif
/* Nucleo-L452RE GPIOs ******************************************************/
/* LED. User LD2: the green LED is a user LED connected to Arduino signal
* D13 corresponding to MCU I/O PA5 (pin 21) or PB13 (pin 34) depending on
* the STM32 target.
*
* - When the I/O is HIGH value, the LED is on.
* - When the I/O is LOW, the LED is off.
*/
#define GPIO_LD2 (GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_2MHz | \
GPIO_OUTPUT_CLEAR | GPIO_PORTA | GPIO_PIN5)
/* Button definitions *******************************************************/
/* B1 USER: the user button is connected to the I/O PC13 (pin 2) of the STM32
* microcontroller.
*/
#define MIN_IRQBUTTON BUTTON_USER
#define MAX_IRQBUTTON BUTTON_USER
#define NUM_IRQBUTTONS 1
#define GPIO_BTN_USER (GPIO_INPUT | GPIO_FLOAT | GPIO_EXTI | \
GPIO_PORTC | GPIO_PIN13)
/****************************************************************************
* Public Types
****************************************************************************/
/****************************************************************************
* Public data
****************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: stm32_bringup
*
* Description:
* Perform architecture-specific initialization
*
* CONFIG_BOARD_INITIALIZE=y :
* Called from board_initialize().
*
* CONFIG_BOARD_INITIALIZE=n && CONFIG_LIB_BOARDCTL=y :
* Called from the NSH library
*
****************************************************************************/
int stm32_bringup(void);
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_NUCLEO_L452RE_SRC_NUCLEO_L452RE_H */
configs/nucleo-l452re/src/stm32_appinit.c
+87
View File
@@ -0,0 +1,87 @@
/****************************************************************************
* config/nucleo-l452re/src/stm32_appinit.c
*
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* Alan Carvalho de Assis <acassis@gmail.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <nuttx/board.h>
#include "nucleo-l452re.h"
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_app_initialize
*
* Description:
* Perform application specific initialization. This function is never
* called directly from application code, but only indirectly via the
* (non-standard) boardctl() interface using the command BOARDIOC_INIT.
*
* Input Parameters:
* arg - The boardctl() argument is passed to the board_app_initialize()
* implementation without modification. The argument has no
* meaning to NuttX; the meaning of the argument is a contract
* between the board-specific initalization logic and the the
* matching application logic. The value cold be such things as a
* mode enumeration value, a set of DIP switch switch settings, a
* pointer to configuration data read from a file or serial FLASH,
* or whatever you would like to do with it. Every implementation
* should accept zero/NULL as a default configuration.
*
* Returned Value:
* Zero (OK) is returned on success; a negated errno value is returned on
* any failure to indicate the nature of the failure.
*
****************************************************************************/
int board_app_initialize(uintptr_t arg)
{
/* Did we already initialize via board_initialize()? */
#ifndef CONFIG_BOARD_INITIALIZE
return stm32_bringup();
#else
return OK;
#endif
}
configs/nucleo-l452re/src/stm32_autoleds.c
+96
View File
@@ -0,0 +1,96 @@
/****************************************************************************
* configs/nucleo-l452re/src/stm32_autoleds.c
*
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/board.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "stm32l4_gpio.h"
#include "nucleo-l452re.h"
#ifdef CONFIG_ARCH_LEDS
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_autoled_initialize
****************************************************************************/
void board_autoled_initialize(void)
{
/* Configure LD2 GPIO for output */
stm32l4_configgpio(GPIO_LD2);
}
/****************************************************************************
* Name: board_autoled_on
****************************************************************************/
void board_autoled_on(int led)
{
if (led == 1)
{
stm32l4_gpiowrite(GPIO_LD2, true);
}
}
/****************************************************************************
* Name: board_autoled_off
****************************************************************************/
void board_autoled_off(int led)
{
if (led == 1)
{
stm32l4_gpiowrite(GPIO_LD2, false);
}
}
#endif /* CONFIG_ARCH_LEDS */
configs/nucleo-l452re/src/stm32_boot.c
+94
View File
@@ -0,0 +1,94 @@
/************************************************************************************
* configs/nucleo-l452re/src/stm32_boot.c
*
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* Alan Carvalho de Assis <acassis@gmail.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <debug.h>
#include <nuttx/board.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "nucleo-l452re.h"
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32l4_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void stm32l4_boardinitialize(void)
{
#ifdef CONFIG_ARCH_LEDS
/* Configure on-board LEDs if LED support has been selected. */
board_autoled_initialize();
#endif
}
/****************************************************************************
* Name: board_initialize
*
* Description:
* If CONFIG_BOARD_INITIALIZE is selected, then an additional
* initialization call will be performed in the boot-up sequence to a
* function called board_initialize(). board_initialize() will be
* called immediately after up_initialize() is called and just before the
* initial application is started. This additional initialization phase
* may be used, for example, to initialize board-specific device drivers.
*
****************************************************************************/
#ifdef CONFIG_BOARD_INITIALIZE
void board_initialize(void)
{
/* Perform board-specific initialization here if so configured */
(void)stm32_bringup();
}
#endif
configs/nucleo-l452re/src/stm32_bringup.c
+117
View File
@@ -0,0 +1,117 @@
/****************************************************************************
* config/nucleo-l452re/src/stm32_bringup.c
*
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/mount.h>
#include <sys/types.h>
#include <debug.h>
#include <nuttx/i2c/i2c_master.h>
#include "stm32l4_i2c.h"
#include "nucleo-l452re.h"
/****************************************************************************
* Pre-processor Defintiionis
****************************************************************************/
#undef HAVE_I2C_DRIVER
#if defined(CONFIG_STM32L4_I2C1) && defined(CONFIG_I2C_DRIVER)
# define HAVE_I2C_DRIVER 1
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: stm32_bringup
*
* Description:
* Perform architecture-specific initialization
*
* CONFIG_BOARD_INITIALIZE=y :
* Called from board_initialize().
*
* CONFIG_BOARD_INITIALIZE=n && CONFIG_LIB_BOARDCTL=y :
* Called from the NSH library
*
****************************************************************************/
int stm32_bringup(void)
{
#ifdef HAVE_I2C_DRIVER
FAR struct i2c_master_s *i2c;
#endif
int ret;
#ifdef CONFIG_FS_PROCFS
/* Mount the procfs file system */
ret = mount(NULL, "/proc", "procfs", 0, NULL);
if (ret < 0)
{
ferr("ERROR: Failed to mount procfs at /proc: %d\n", ret);
}
#endif
#ifdef HAVE_I2C_DRIVER
/* Get the I2C lower half instance */
i2c = stm32l4_i2cbus_initialize(1);
if (i2c == NULL)
{
i2cerr("ERROR: Initialize I2C1: %d\n", ret);
}
else
{
/* Register the I2C character driver */
ret = i2c_register(i2c, 1);
if (ret < 0)
{
i2cerr("ERROR: Failed to register I2C1 device: %d\n", ret);
}
}
#endif
UNUSED(ret);
return OK;
}
configs/nucleo-l452re/src/stm32_buttons.c
+128
View File
@@ -0,0 +1,128 @@
/****************************************************************************
* configs/nucleo-l452re/src/stm32_buttons.c
*
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <errno.h>
#include <nuttx/arch.h>
#include <nuttx/board.h>
#include <arch/board/board.h>
#include "stm32l4_gpio.h"
#include "nucleo-l452re.h"
#ifdef CONFIG_ARCH_BUTTONS
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_button_initialize
*
* Description:
* board_button_initialize() must be called to initialize button resources.
* After that, board_buttons() may be called to collect the current state
* of all buttons or board_button_irq() may be called to register button
* interrupt handlers.
*
****************************************************************************/
void board_button_initialize(void)
{
/* Configure the single button as an input. NOTE that EXTI interrupts are
* also configured for the pin.
*/
stm32l4_configgpio(GPIO_BTN_USER);
}
/****************************************************************************
* Name: board_buttons
****************************************************************************/
uint32_t board_buttons(void)
{
/* Check that state of each USER button. A LOW value means that the key is
* pressed.
*/
bool released = stm32l4_gpioread(GPIO_BTN_USER);
return !released;
}
/************************************************************************************
* Button support.
*
* Description:
* board_button_initialize() must be called to initialize button resources. After
* that, board_buttons() may be called to collect the current state of all
* buttons or board_button_irq() may be called to register button interrupt
* handlers.
*
* After board_button_initialize() has been called, board_buttons() may be called to
* collect the state of all buttons. board_buttons() returns an 32-bit bit set
* with each bit associated with a button. See the BUTTON_*_BIT
* definitions in board.h for the meaning of each bit.
*
* board_button_irq() may be called to register an interrupt handler that will
* be called when a button is depressed or released. The ID value is a
* button enumeration value that uniquely identifies a button resource. See the
* BUTTON_* definitions in board.h for the meaning of enumeration
* value.
*
************************************************************************************/
#ifdef CONFIG_ARCH_IRQBUTTONS
int board_button_irq(int id, xcpt_t irqhandler, FAR void *arg)
{
int ret = -EINVAL;
if (id == BUTTON_USER)
{
ret = stm32l4_gpiosetevent(GPIO_BTN_USER, true, true, true, irqhandler, arg);
}
return ret;
}
#endif
#endif /* CONFIG_ARCH_BUTTONS */
configs/nucleo-l452re/src/stm32_spi.c
+223
View File
@@ -0,0 +1,223 @@
/****************************************************************************
* configs/nucleo-l452re/src/stm32_spi.c
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/spi/spi.h>
#include <arch/board/board.h>
#include <up_arch.h>
#include <chip.h>
#include <stm32l4.h>
#include "nucleo-l452re.h"
#if defined(CONFIG_STM32L4_SPI1) || defined(CONFIG_STM32L4_SPI2) || defined(CONFIG_STM32L4_SPI3)
/************************************************************************************
* Public Data
************************************************************************************/
/* Global driver instances */
#ifdef CONFIG_STM32L4_SPI1
struct spi_dev_s *g_spi1;
#endif
#ifdef CONFIG_STM32L4_SPI2
struct spi_dev_s *g_spi2;
#endif
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32l4_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins.
*
************************************************************************************/
void weak_function stm32l4_spiinitialize(void)
{
#ifdef CONFIG_STM32L4_SPI1
/* Configure SPI-based devices */
g_spi1 = stm32l4_spibus_initialize(1);
if (!g_spi1)
{
spierr("ERROR: FAILED to initialize SPI port 1\n");
}
#ifdef HAVE_MMCSD
stm32l4_configgpio(GPIO_SPI_CS_SD_CARD);
#endif
#endif
#ifdef CONFIG_STM32L4_SPI2
/* Configure SPI-based devices */
g_spi2 = stm32l4_spibus_initialize(2);
if (!g_spi2)
{
spierr("ERROR: FAILED to initialize SPI port 1\n");
}
#endif
}
/****************************************************************************
* Name: stm32l4_spi1/2/3select and stm32l4_spi1/2/3status
*
* Description:
* The external functions, stm32l4_spi1/2/3select and stm32l4_spi1/2/3status must be
* provided by board-specific logic. They are implementations of the select
* and status methods of the SPI interface defined by struct spi_ops_s (see
* include/nuttx/spi/spi.h). All other methods (including up_spiinitialize())
* are provided by common STM32 logic. To use this common SPI logic on your
* board:
*
* 1. Provide logic in stm32l4_boardinitialize() to configure SPI chip select
* pins.
* 2. Provide stm32l4_spi1/2/3select() and stm32l4_spi1/2/3status() functions in your
* board-specific logic. These functions will perform chip selection and
* status operations using GPIOs in the way your board is configured.
* 3. Add a calls to up_spiinitialize() in your low level application
* initialization logic
* 4. The handle returned by up_spiinitialize() may then be used to bind the
* SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver).
*
****************************************************************************/
#ifdef CONFIG_STM32L4_SPI1
void stm32l4_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
{
spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
#ifdef HAVE_MMCSD
if (devid == SPIDEV_MMCSD(0))
{
stm32l4_gpiowrite(GPIO_SPI_CS_SD_CARD, !selected);
}
#endif
}
uint8_t stm32l4_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
{
return 0;
}
#endif
#ifdef CONFIG_STM32L4_SPI2
void stm32l4_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
{
spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
}
uint8_t stm32l4_spi2status(FAR struct spi_dev_s *dev, uint32_t devid)
{
return 0;
}
#endif
#ifdef CONFIG_STM32L4_SPI3
void stm32l4_spi3select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
}
uint8_t stm32l4_spi3status(FAR struct spi_dev_s *dev, uint32_t devid)
{
return 0;
}
#endif
/****************************************************************************
* Name: stm32l4_spi1cmddata
*
* Description:
* Set or clear the SH1101A A0 or SD1306 D/C n bit to select data (true)
* or command (false). This function must be provided by platform-specific
* logic. This is an implementation of the cmddata method of the SPI
* interface defined by struct spi_ops_s (see include/nuttx/spi/spi.h).
*
* Input Parameters:
*
* spi - SPI device that controls the bus the device that requires the CMD/
* DATA selection.
* devid - If there are multiple devices on the bus, this selects which one
* to select cmd or data. NOTE: This design restricts, for example,
* one one SPI display per SPI bus.
* cmd - true: select command; false: select data
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef CONFIG_SPI_CMDDATA
#ifdef CONFIG_STM32L4_SPI1
int stm32l4_spi1cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
return OK;
}
#endif
#ifdef CONFIG_STM32L4_SPI2
int stm32l4_spi2cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
return OK;
}
#endif
#ifdef CONFIG_STM32L4_SPI3
int stm32l4_spi3cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
{
return OK;
}
#endif
#endif /* CONFIG_SPI_CMDDATA */
#endif /* CONFIG_STM32L4_SPI1 || CONFIG_STM32L4_SPI2 || CONFIG_STM32L4_SPI3 */
configs/nucleo-l452re/src/stm32_userleds.c
+217
View File
@@ -0,0 +1,217 @@
/****************************************************************************
* configs/nucleo-l452re/src/stm32_userleds.c
*
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include <nuttx/power/pm.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "stm32l4_gpio.h"
#include "nucleo-l452re.h"
#ifndef CONFIG_ARCH_LEDS
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* LED Power Management */
#ifdef CONFIG_PM
static void led_pm_notify(struct pm_callback_s *cb, int domain,
enum pm_state_e pmstate);
static int led_pm_prepare(struct pm_callback_s *cb, int domain,
enum pm_state_e pmstate);
#endif
/****************************************************************************
* Private Data
****************************************************************************/
#ifdef CONFIG_PM
static struct pm_callback_s g_ledscb =
{
.notify = led_pm_notify,
.prepare = led_pm_prepare,
};
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: led_pm_notify
*
* Description:
* Notify the driver of new power state. This callback is called after
* all drivers have had the opportunity to prepare for the new power state.
*
****************************************************************************/
#ifdef CONFIG_PM
static void led_pm_notify(struct pm_callback_s *cb, int domain,
enum pm_state_e pmstate)
{
switch (pmstate)
{
case(PM_NORMAL):
{
/* Restore normal LEDs operation */
}
break;
case(PM_IDLE):
{
/* Entering IDLE mode - Turn leds off */
}
break;
case(PM_STANDBY):
{
/* Entering STANDBY mode - Logic for PM_STANDBY goes here */
}
break;
case(PM_SLEEP):
{
/* Entering SLEEP mode - Logic for PM_SLEEP goes here */
}
break;
default:
{
/* Should not get here */
}
break;
}
}
#endif
/****************************************************************************
* Name: led_pm_prepare
*
* Description:
* Request the driver to prepare for a new power state. This is a warning
* that the system is about to enter into a new power state. The driver
* should begin whatever operations that may be required to enter power
* state. The driver may abort the state change mode by returning a
* non-zero value from the callback function.
*
****************************************************************************/
#ifdef CONFIG_PM
static int led_pm_prepare(struct pm_callback_s *cb, int domain,
enum pm_state_e pmstate)
{
/* No preparation to change power modes is required by the LEDs driver.
* We always accept the state change by returning OK.
*/
return OK;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_userled_initialize
****************************************************************************/
void board_userled_initialize(void)
{
/* Configure LD2 GPIO for output */
stm32l4_configgpio(GPIO_LD2);
}
/****************************************************************************
* Name: board_userled
****************************************************************************/
void board_userled(int led, bool ledon)
{
if (led == 1)
{
stm32l4_gpiowrite(GPIO_LD2, ldeon);
}
}
/****************************************************************************
* Name: board_userled_all
****************************************************************************/
void board_userled_all(uint8_t ledset)
{
if (led == 1)
{
stm32l4_gpiowrite(GPIO_LD2, (ledset & BOARD_LD2_BIT) != 0);
}
}
/****************************************************************************
* Name: stm32l4_led_pminitialize
****************************************************************************/
#ifdef CONFIG_PM
void stm32l4_led_pminitialize(void)
{
/* Register to receive power management callbacks */
int ret = pm_register(&g_ledscb);
DEBUGASSERT(ret == OK);
UNUSED(ret);
}
#endif /* CONFIG_PM */
#endif /* !CONFIG_ARCH_LEDS */
configs/nucleo-l496zg/Kconfig
+2 -217
View File
@@ -3,221 +3,6 @@
# see the file kconfig-language.txt in the NuttX tools repository.
#
if ARCH_BOARD_NUCLEO_144
if ARCH_BOARD_NUCLEO_L496ZG
choice
prompt "Select Console wiring."
default NUCLEO_ARDUINO
---help---
Select where you will connect the console.
Virtual COM Port:
Advantage: Use the ST-Link as a console. No Extra wiring
neded.
Disdvantage: Not the best choice for initial bring up.
ARDUINO Connector:
Advantage: You have a shield so it is
easy.
Disdvantage: You loose the use of the
other functions on PC6, PC7
STM32F7
ARDUIONO FUNCTION GPIO
-- ----- --------- ----
DO RX USART6_RX PG9
D1 TX USART6_TX PG14
-- ----- --------- ---
OR
Morpho Connector:
STM32F7
MORPHO FUNCTION GPIO
-------- --------- -----
CN12-64 USART8_RX PE0
CN11-61 USART8_TX PE1
-------- --------- -----
config NUCLEO_CONSOLE_ARDUINO
bool "ARDUINO Connector"
select STM32F7_USART6
select USART6_SERIALDRIVER
select USART6_SERIAL_CONSOLE
config NUCLEO_CONSOLE_VIRTUAL
bool "Virtual Comport"
select STM32F7_USART3
select USART3_SERIALDRIVER
select USART3_SERIAL_CONSOLE
config NUCLEO_CONSOLE_MORPHO
bool "Morpho Connector"
select STM32F7_UART8
select UART8_SERIALDRIVER
select UART8_SERIAL_CONSOLE
config NUCLEO_CONSOLE_NONE
bool "No Console"
endchoice # "Select Console wiring"
config NUCLEO_SPI_TEST
bool "Enable SPI test"
default n
---help---
Enable Spi test - initalize and configure SPI to send
NUCLEO_SPI_TEST_MESSAGE text. The text is sent on the
selected SPI Buses with the configured parameters.
Note the CS lines will not be asserted.
if NUCLEO_SPI_TEST
config NUCLEO_SPI_TEST_MESSAGE
string "Text to Send on SPI Bus(es)"
default "Hello World"
depends on NUCLEO_SPI_TEST
---help---
Text to sent on SPI bus(es)
config NUCLEO_SPI1_TEST
bool "Test SPI bus 1"
default n
depends on NUCLEO_SPI_TEST
---help---
Enable Spi test - on SPI BUS 1
if NUCLEO_SPI1_TEST
config NUCLEO_SPI1_TEST_FREQ
int "SPI 1 Clock Freq in Hz"
default 1000000
depends on NUCLEO_SPI1_TEST
---help---
Sets SPI 1 Clock Freq
config NUCLEO_SPI1_TEST_BITS
int "SPI 1 number of bits"
default 8
depends on NUCLEO_SPI1_TEST
---help---
Sets SPI 1 bit length
choice
prompt "SPI BUS 1 Clock Mode"
default NUCLEO_SPI1_TEST_MODE3
---help---
Sets SPI 1 clock mode
config NUCLEO_SPI1_TEST_MODE0
bool "CPOL=0 CHPHA=0"
config NUCLEO_SPI1_TEST_MODE1
bool "CPOL=0 CHPHA=1"
config NUCLEO_SPI1_TEST_MODE2
bool "CPOL=1 CHPHA=0"
config NUCLEO_SPI1_TEST_MODE3
bool "CPOL=1 CHPHA=1"
endchoice # "SPI BUS 1 Clock Mode"
endif # NUCLEO_SPI1_TEST
config NUCLEO_SPI2_TEST
bool "Test SPI bus 2"
default n
depends on NUCLEO_SPI_TEST
---help---
Enable Spi test - on SPI BUS 2
if NUCLEO_SPI2_TEST
config NUCLEO_SPI2_TEST_FREQ
int "SPI 2 Clock Freq in Hz"
default 12000000
depends on NUCLEO_SPI2_TEST
---help---
Sets SPI 2 Clock Freq
config NUCLEO_SPI2_TEST_BITS
int "SPI 2 number of bits"
default 8
depends on NUCLEO_SPI2_TEST
---help---
Sets SPI 2 bit length
choice
prompt "SPI BUS 2 Clock Mode"
default NUCLEO_SPI2_TEST_MODE3
---help---
Sets SPI 2 clock mode
config NUCLEO_SPI2_TEST_MODE0
bool "CPOL=0 CHPHA=0"
config NUCLEO_SPI2_TEST_MODE1
bool "CPOL=0 CHPHA=1"
config NUCLEO_SPI2_TEST_MODE2
bool "CPOL=1 CHPHA=0"
config NUCLEO_SPI2_TEST_MODE3
bool "CPOL=1 CHPHA=1"
endchoice # "SPI BUS 2 Clock Mode"
endif # NUCLEO_SPI2_TEST
config NUCLEO_SPI3_TEST
bool "Test SPI bus 3"
default n
depends on NUCLEO_SPI_TEST
---help---
Enable Spi test - on SPI BUS 3
if NUCLEO_SPI3_TEST
config NUCLEO_SPI3_TEST_FREQ
int "SPI 3 Clock Freq in Hz"
default 40000000
depends on NUCLEO_SPI3_TEST
---help---
Sets SPI 3 Clock Freq
config NUCLEO_SPI3_TEST_BITS
int "SPI 3 number of bits"
default 8
depends on NUCLEO_SPI3_TEST
---help---
Sets SPI 3 bit length
choice
prompt "SPI BUS 3 Clock Mode"
default NUCLEO_SPI3_TEST_MODE3
---help---
Sets SPI 3 clock mode
config NUCLEO_SPI3_TEST_MODE0
bool "CPOL=0 CHPHA=0"
config NUCLEO_SPI3_TEST_MODE1
bool "CPOL=0 CHPHA=1"
config NUCLEO_SPI3_TEST_MODE2
bool "CPOL=1 CHPHA=0"
config NUCLEO_SPI3_TEST_MODE3
bool "CPOL=1 CHPHA=1"
endchoice # "SPI BUS 3 Clock Mode"
endif # NUCLEO_SPI3_TEST
endif # NUCLEO_SPI_TEST
endif # ARCH_BOARD_NUCLEO_144
endif # ARCH_BOARD_NUCLEO_L496ZG
configs/nucleo-l496zg/nsh/defconfig
+15 -12
View File
@@ -166,7 +166,7 @@ CONFIG_ARCH_HAVE_CMNVECTOR=y
CONFIG_ARMV7M_CMNVECTOR=y
# CONFIG_ARMV7M_LAZYFPU is not set
CONFIG_ARCH_HAVE_FPU=y
CONFIG_ARCH_HAVE_DPFPU=y
# CONFIG_ARCH_HAVE_DPFPU is not set
# CONFIG_ARCH_FPU is not set
# CONFIG_ARCH_HAVE_TRUSTZONE is not set
CONFIG_ARM_HAVE_MPU_UNIFIED=y
@@ -178,15 +178,13 @@ CONFIG_ARM_HAVE_MPU_UNIFIED=y
#
# CONFIG_ARMV7M_HAVE_ICACHE is not set
# CONFIG_ARMV7M_HAVE_DCACHE is not set
CONFIG_ARMV7M_HAVE_ITCM=y
CONFIG_ARMV7M_HAVE_DTCM=y
# CONFIG_ARMV7M_ITCM is not set
# CONFIG_ARMV7M_DTCM is not set
# CONFIG_ARMV7M_HAVE_ITCM is not set
# CONFIG_ARMV7M_HAVE_DTCM is not set
# CONFIG_ARMV7M_TOOLCHAIN_IARL is not set
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y
CONFIG_ARMV7M_HAVE_STACKCHECK=y
CONFIG_ARMV7M_STACKCHECK=y
# CONFIG_ARMV7M_ITMSYSLOG is not set
@@ -281,6 +279,7 @@ CONFIG_STM32L4_HAVE_DAC2=y
CONFIG_STM32L4_HAVE_DCMI=y
CONFIG_STM32L4_HAVE_DFSDM1=y
CONFIG_STM32L4_HAVE_DMA2D=y
CONFIG_STM32L4_HAVE_FSMC=y
# CONFIG_STM32L4_HAVE_HASH is not set
CONFIG_STM32L4_HAVE_I2C4=y
CONFIG_STM32L4_HAVE_LCD=y
@@ -292,7 +291,11 @@ CONFIG_STM32L4_HAVE_SAI1=y
CONFIG_STM32L4_HAVE_SAI2=y
CONFIG_STM32L4_HAVE_SDMMC1=y
CONFIG_STM32L4_HAVE_TIM3=y
CONFIG_STM32L4_HAVE_TIM4=y
CONFIG_STM32L4_HAVE_TIM5=y
CONFIG_STM32L4_HAVE_TIM7=y
CONFIG_STM32L4_HAVE_TIM8=y
CONFIG_STM32L4_HAVE_TIM17=y
CONFIG_STM32L4_ADC=y
# CONFIG_STM32L4_CAN is not set
# CONFIG_STM32L4_DAC is not set
@@ -321,15 +324,11 @@ CONFIG_STM32L4_ADC1=y
# CONFIG_STM32L4_DCMI is not set
# CONFIG_STM32L4_DMA2D is not set
CONFIG_STM32L4_RNG=y
# CONFIG_STM32L4_SAI1_A is not set
# CONFIG_STM32L4_SAI1_B is not set
# CONFIG_STM32L4_SAI2_A is not set
# CONFIG_STM32L4_SAI2_B is not set
#
# AHB3 Peripherals
#
# CONFIG_STM32L4_FMC is not set
CONFIG_STM32L4_FSMC=y
# CONFIG_STM32L4_QSPI is not set
#
@@ -402,6 +401,9 @@ CONFIG_STM32L4_SAI1PLL=y
# CONFIG_STM32L4_ONESHOT is not set
# CONFIG_STM32L4_FREERUN is not set
# CONFIG_STM32L4_TIM3_CAP is not set
# CONFIG_STM32L4_TIM4_CAP is not set
# CONFIG_STM32L4_TIM5_CAP is not set
# CONFIG_STM32L4_TIM8_CAP is not set
#
# ADC Configuration
@@ -698,6 +700,7 @@ CONFIG_ANALOG=y
# CONFIG_ADC is not set
# CONFIG_COMP is not set
# CONFIG_DAC is not set
# CONFIG_OPAMP is not set
# CONFIG_AUDIO_DEVICES is not set
# CONFIG_VIDEO_DEVICES is not set
# CONFIG_BCH is not set
configs/photon/README.txt
+125
View File
@@ -0,0 +1,125 @@
README
======
This README discusses issues unique to NuttX configurations for the
Particle.io Photon board featuring the STM32F205RG MCU.
The STM32F205RG is a 120 MHz Cortex-M3 operation with 1Mbit Flash
memory and 128kbytes. The board includes a Broadcom BCM43362 WiFi.
Contents
========
- Selecting the Photon board on NuttX
- Configuring NuttX to use your Wireless Router (aka Access Point)
- Flashing NuttX in the Photon board
- Serial console configuration
Selecting the Photon board on NuttX
===================================
NOTICE: We will not discuss about toolchains and environment configuration
here, please take a look at STM32F4Discory board README or other STM32 board
because it should work for Photon board as well.
Let us to consider that you cloned the nuttx and apps repositories, then
follow these steps:
1) Clear your build system before to start:
$ make apps_distclean
$ make distclean
2) Enter inside nuttx/tools and configure to use the Photon board:
$ cd nuttx
$ cd tools
$ ./configure.sh photon/wlan
Now please return to root of nuttx/ directory:
$ cd ..
Configuring NuttX to use your Wireless Router (aka Access Point)
================================================================
Since you are already in the root of nuttx/ repository, execute
make menuconfig to define your Wireless Router and your password:
$ make menuconfig
Browser the menus this way:
Application Configuration --->
NSH Library --->
Networking Configuration --->
WAPI Configuration --->
(myApSSID) SSID
(mySSIDpassphrase) Passprhase
Replace the SSID from myApSSID with your wireless router name and
the Passprhase with your WiFi password.
Exit and save your configuration.
Finally just compile NuttX:
$ make
Flashing NuttX in the Photon board
==================================
Connect the Photon board in your computer using a MicroUSB cable. Press and
hold both board's buttons (SETUP and RESET), then release the RESET button,
the board will start blinking in the Purple color, waiting until it starts
blinking in Yellow color. Now you can release the SETUP button as well.
1) You can verify if DFU mode in your board is working, using this command:
$ sudo dfu-util -l
dfu-util 0.8
Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2014 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to dfu-util@lists.gnumonks.org
Found DFU: [2b04:d006] ver=0200, devnum=15, cfg=1, intf=0, alt=1, name="@DCT Flash /0x00000000/01*016Kg", serial="00000000010C"
Found DFU: [2b04:d006] ver=0200, devnum=15, cfg=1, intf=0, alt=0, name="@Internal Flash /0x08000000/03*016Ka,01*016Kg,01*064Kg,07*128Kg", serial="00000000010C"
2) Flash the nuttx.bin inside the Internal Flash:
$ sudo dfu-util -d 2b04:d006 -a 0 -s 0x08020000 -D nuttx.bin
dfu-util 0.8
Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2014 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to dfu-util@lists.gnumonks.org
dfu-util: Invalid DFU suffix signature
dfu-util: A valid DFU suffix will be required in a future dfu-util release!!!
Opening DFU capable USB device...
ID 2b04:d006
Run-time device DFU version 011a
Claiming USB DFU Interface...
Setting Alternate Setting #0 ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 011a
Device returned transfer size 4096
DfuSe interface name: "Internal Flash "
Downloading to address = 0x08020000, size = 331348
Download [=========================] 100% 331348 bytes
Download done.
File downloaded successfully
Serial console configuration
============================
Connect a USB/Serial 3.3V dongle to GND, TX and RX pins of Photon board.
Then use some serial console client (minicom, picocom, teraterm, etc) confi-
gured to 115200 8n1 without software or hardware flow control.
Reset the board and you should see NuttX starting in the serial.
configs/photon/wlan/defconfig
+11 -2
View File
@@ -16,7 +16,7 @@ CONFIG_HOST_LINUX=y
#
# Build Configuration
#
CONFIG_APPS_DIR="../apps"
# CONFIG_APPS_DIR="../apps"
CONFIG_BUILD_FLAT=y
# CONFIG_BUILD_2PASS is not set
@@ -1552,6 +1552,16 @@ CONFIG_NSH_DRIPADDR=0xc0a80001
CONFIG_NSH_NETMASK=0xffffff00
# CONFIG_NSH_DNS is not set
# CONFIG_NSH_NOMAC is not set
#
# WAPI Configuration
#
CONFIG_NSH_WAPI_STAMODE=2
CONFIG_NSH_WAPI_AUTHWPA=0x00000004
CONFIG_NSH_WAPI_CIPHERMODE=0x00000008
CONFIG_NSH_WAPI_ALG=3
CONFIG_NSH_WAPI_SSID="myApSSID"
CONFIG_NSH_WAPI_PASSPHRASE="mySSIDpassphrase"
CONFIG_NSH_MAX_ROUNDTRIP=20
# CONFIG_NSH_LOGIN is not set
# CONFIG_NSH_CONSOLE_LOGIN is not set
@@ -1595,4 +1605,3 @@ CONFIG_WIRELESS_WAPI=y
CONFIG_WIRELESS_WAPI_CMDTOOL=y
CONFIG_WIRELESS_WAPI_STACKSIZE=2048
CONFIG_WIRELESS_WAPI_PRIORITY=100
CONFIG_WIRELESS_WEXT=y
configs/sim/sixlowpan/defconfig
+1 -1
View File
@@ -548,7 +548,7 @@ CONFIG_NET_6LOWPAN_MAXADDRCONTEXT=1
CONFIG_NET_6LOWPAN_MAXADDRCONTEXT_PREFIX_0_0=0xaa
CONFIG_NET_6LOWPAN_MAXADDRCONTEXT_PREFIX_0_1=0xaa
# CONFIG_NET_6LOWPAN_MAXADDRCONTEXT_PREINIT_1 is not set
# CONFIG_NET_6LOWPAN_RIMEADDR_EXTENDED is not set
# CONFIG_NET_6LOWPAN_EXTENDEDADDR is not set
CONFIG_NET_6LOWPAN_MAXAGE=20
CONFIG_NET_6LOWPAN_MAX_MACTRANSMITS=4
CONFIG_NET_6LOWPAN_MTU=1294