include: nuttx: power: nxstyle error fix

Nxstyle error fix to silence the CI.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

include/nuttx/power/battery_charger.h

@@ -52,7 +52,9 @@
 /****************************************************************************
  * Pre-processor Definitions
  ****************************************************************************/
+
 /* Configuration ************************************************************/
+
 /* CONFIG_BATTERY_CHARGER - Upper half battery charger driver support
  *
  * Specific, lower-half drivers will have other configuration requirements
@@ -64,8 +66,10 @@
  */
 
 /* IOCTL Commands ***********************************************************/
-/* The upper-half battery charger driver provides a character driver "wrapper"
- * around the lower-half battery charger driver that does all of the real work.
+
+/* The upper-half battery charger driver provides a character driver
+ * "wrapper" around the lower-half battery charger driver that does all of
+ * the real work.
  * Since there is no real data transfer to/or from a battery, all of the
  * driver interaction is through IOCTL commands.  The IOCTL commands
  * supported by the upper-half driver simply provide calls into the
@@ -86,7 +90,8 @@
  * BATIOC_INPUT_CURRENT - Define the input current limit of power supply.
  *   Input value:  An int defining the input current limit value.
  * BATIOC_OPERATE - Perform miscellaneous, device-specific charger operation.
- *   Input value:  An uintptr_t that can hold a pointer to struct batio_operate_msg_s.
+ *   Input value:  An uintptr_t that can hold a pointer to struct
+ *                 batio_operate_msg_s.
  */
 
 /* Special input values for BATIOC_INPUT_CURRENT that may optionally
@@ -98,6 +103,7 @@
 /****************************************************************************
  * Public Types
  ****************************************************************************/
+
 /* Battery status */
 
 enum battery_charger_status_e
@@ -126,7 +132,7 @@ enum battery_charger_health_e
   BATTERY_HEALTH_DISCONNECTED  /* Battery is not connected */
 };
 
- /* This structure defines the lower half battery interface */
+  /* This structure defines the lower half battery interface */
 
 struct battery_charger_dev_s;
 struct battery_charger_operations_s
@@ -167,6 +173,7 @@ struct battery_charger_dev_s
   /* Fields required by the upper-half driver */
 
   FAR const struct battery_charger_operations_s *ops; /* Battery operations */
+
   sem_t batsem;  /* Enforce mutually exclusive access */
 
   /* Data fields specific to the lower-half driver may follow */
@@ -189,6 +196,7 @@ extern "C"
 /****************************************************************************
  * Public Function Prototypes
  ****************************************************************************/
+
 /****************************************************************************
  * Name: battery_charger_register
  *
@@ -238,10 +246,11 @@ int battery_charger_register(FAR const char *devpath,
 #if defined(CONFIG_I2C) && defined(CONFIG_I2C_BQ2425X)
 
 struct i2c_master_s;
-FAR struct battery_charger_dev_s *bq2425x_initialize(FAR struct i2c_master_s *i2c,
-                                                     uint8_t addr,
-                                                     uint32_t frequency,
-                                                     int current);
+FAR struct battery_charger_dev_s *bq2425x_initialize(
+                                    FAR struct i2c_master_s *i2c,
+                                     uint8_t addr,
+                                     uint32_t frequency,
+                                     int current);
 #endif
 
 /****************************************************************************
@@ -287,10 +296,11 @@ FAR struct battery_charger_dev_s *bq2425x_initialize(FAR struct i2c_master_s *i2
 #if defined(CONFIG_I2C) && defined(CONFIG_I2C_BQ2429X)
 
 struct i2c_master_s;
-FAR struct battery_charger_dev_s *bq2429x_initialize(FAR struct i2c_master_s *i2c,
-                                                     uint8_t addr,
-                                                     uint32_t frequency,
-                                                     int current);
+FAR struct battery_charger_dev_s *bq2429x_initialize(
+                                     FAR struct i2c_master_s *i2c,
+                                     uint8_t addr,
+                                     uint32_t frequency,
+                                     int current);
 #endif
 
 #undef EXTERN

include/nuttx/power/relay.h

@@ -50,6 +50,7 @@
 /****************************************************************************
  * Pre-Processor Definitions
  ****************************************************************************/
+
 /* IOCTL Commands ***********************************************************/
 
 #define RELAYIOC_CTRL   _RELAYIOC(0x0001) /* Relay control