mirror of
https://github.com/apache/nuttx.git
synced 2026-06-06 00:14:22 +08:00
Add directory structure to support the port to the Kinesis KwikStik-K40
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3845 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
@@ -0,0 +1,382 @@
|
||||
README.txt
|
||||
==========
|
||||
|
||||
This is the README file for the port of NuttX to the Freescale Kinetis
|
||||
KwiStick K40. Refer to the Freescale web site for further information
|
||||
about this part:
|
||||
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=KWIKSTIK-K40
|
||||
|
||||
Contents
|
||||
========
|
||||
|
||||
o Kinetis KwikStik Features
|
||||
o Development Environment
|
||||
o GNU Toolchain Options
|
||||
o IDEs
|
||||
o NuttX buildroot Toolchain
|
||||
|
||||
Kinetis KwikStik Features:
|
||||
=========================
|
||||
|
||||
o Kinetis K40 MCU in 144 LQFP
|
||||
- 100 MHz ARM Cortex-M4 core
|
||||
- 256Kb program flash, 256Kb FlexMemory
|
||||
- Full-speed USB 2.0 device
|
||||
- Low-pwer segment LCD controller
|
||||
- SPI, UART, CAN and more
|
||||
o Large segment LCD display with 306 segments
|
||||
o 2.3mm audio output and 2 micro USB connectors
|
||||
o Omnidirectional microphone and a buzzer
|
||||
o On-board Segger J-Link debugger interface
|
||||
o Infrared communication port
|
||||
o microSD card slot
|
||||
o Capacitive touch sensing interface
|
||||
o Freescale Tower System connectivity for UART, timers, CAN, SPI, I2C, and DAC
|
||||
o Freescale Tower plug-in (TWRPI) socket connectivity for ADC, SPI, I2C, and GPIO
|
||||
|
||||
Development Environment
|
||||
=======================
|
||||
|
||||
Either Linux or Cygwin on Windows can be used for the development environment.
|
||||
The source has been built only using the GNU toolchain (see below). Other
|
||||
toolchains will likely cause problems. Testing was performed using the Cygwin
|
||||
environment.
|
||||
|
||||
GNU Toolchain Options
|
||||
=====================
|
||||
|
||||
The NuttX make system has been modified to support the following different
|
||||
toolchain options.
|
||||
|
||||
1. The CodeSourcery GNU toolchain,
|
||||
2. The devkitARM GNU toolchain,
|
||||
3. Raisonance GNU toolchain, or
|
||||
4. The NuttX buildroot Toolchain (see below).
|
||||
|
||||
All testing has been conducted using the NuttX buildroot toolchain. However,
|
||||
the make system is setup to default to use the devkitARM toolchain. To use
|
||||
the CodeSourcery, devkitARM or Raisonance GNU toolchain, you simply need to
|
||||
add one of the following configuration options to your .config (or defconfig)
|
||||
file:
|
||||
|
||||
CONFIG_KINETIS_CODESOURCERYW=y : CodeSourcery under Windows
|
||||
CONFIG_KINETIS_CODESOURCERYL=y : CodeSourcery under Linux
|
||||
CONFIG_KINETIS_DEVKITARM=y : devkitARM under Windows
|
||||
CONFIG_KINETIS_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
|
||||
|
||||
If you are not using CONFIG_KINETIS_BUILDROOT, then you may also have to modify
|
||||
the PATH in the setenv.h file if your make cannot find the tools.
|
||||
|
||||
NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are
|
||||
Windows native toolchains. The CodeSourcey (for Linux) and NuttX buildroot
|
||||
toolchains are Cygwin and/or Linux native toolchains. There are several limitations
|
||||
to using a Windows based toolchain in a Cygwin environment. The three biggest are:
|
||||
|
||||
1. The Windows toolchain cannot follow Cygwin paths. Path conversions are
|
||||
performed automatically in the Cygwin makefiles using the 'cygpath' utility
|
||||
but you might easily find some new path problems. If so, check out 'cygpath -w'
|
||||
|
||||
2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links
|
||||
are used in Nuttx (e.g., include/arch). The make system works around these
|
||||
problems for the Windows tools by copying directories instead of linking them.
|
||||
But this can also cause some confusion for you: For example, you may edit
|
||||
a file in a "linked" directory and find that your changes had not effect.
|
||||
That is because you are building the copy of the file in the "fake" symbolic
|
||||
directory. If you use a Windows toolchain, you should get in the habit of
|
||||
making like this:
|
||||
|
||||
make clean_context all
|
||||
|
||||
An alias in your .bashrc file might make that less painful.
|
||||
|
||||
3. Dependencies are not made when using Windows versions of the GCC. This is
|
||||
because the dependencies are generated using Windows pathes which do not
|
||||
work with the Cygwin make.
|
||||
|
||||
Support has been added for making dependencies with the windows-native toolchains.
|
||||
That support can be enabled by modifying your Make.defs file as follows:
|
||||
|
||||
- MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
+ MKDEP = $(TOPDIR)/tools/mkdeps.sh --winpaths "$(TOPDIR)"
|
||||
|
||||
If you have problems with the dependency build (for example, if you are not
|
||||
building on C:), then you may need to modify tools/mkdeps.sh
|
||||
|
||||
NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization
|
||||
level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with
|
||||
-Os.
|
||||
|
||||
NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that
|
||||
the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
|
||||
path or will get the wrong version of make.
|
||||
|
||||
IDEs
|
||||
====
|
||||
|
||||
NuttX is built using command-line make. It can be used with an IDE, but some
|
||||
effort will be required to create the project.
|
||||
|
||||
Makefile Build
|
||||
--------------
|
||||
Under Eclipse, it is pretty easy to set up an "empty makefile project" and
|
||||
simply use the NuttX makefile to build the system. That is almost for free
|
||||
under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty
|
||||
makefile project in order to work with Windows (Google for "Eclipse Cygwin" -
|
||||
there is a lot of help on the internet).
|
||||
|
||||
Native Build
|
||||
------------
|
||||
Here are a few tips before you start that effort:
|
||||
|
||||
1) Select the toolchain that you will be using in your .config file
|
||||
2) Start the NuttX build at least one time from the Cygwin command line
|
||||
before trying to create your project. This is necessary to create
|
||||
certain auto-generated files and directories that will be needed.
|
||||
3) Set up include pathes: You will need include/, arch/arm/src/k40,
|
||||
arch/arm/src/common, arch/arm/src/cortexm3, and sched/.
|
||||
4) All assembly files need to have the definition option -D __ASSEMBLY__
|
||||
on the command line.
|
||||
|
||||
Startup files will probably cause you some headaches. The NuttX startup file
|
||||
is arch/arm/src/kinetis/k40_vectors.S.
|
||||
|
||||
NuttX buildroot Toolchain
|
||||
=========================
|
||||
|
||||
A GNU GCC-based toolchain is assumed. The files */setenv.sh should
|
||||
be modified to point to the correct path to the Cortex-M4 GCC toolchain (if
|
||||
different from the default in your PATH variable).
|
||||
|
||||
If you have no Cortex-M4 toolchain, one can be downloaded from the NuttX
|
||||
SourceForge download site (https://sourceforge.net/project/showfiles.php?group_id=189573).
|
||||
This GNU toolchain builds and executes in the Linux or Cygwin environment.
|
||||
|
||||
1. You must have already configured Nuttx in <some-dir>/nuttx.
|
||||
|
||||
cd tools
|
||||
./configure.sh kwikstik-k40/<sub-dir>
|
||||
|
||||
2. Download the latest buildroot package into <some-dir>
|
||||
|
||||
3. unpack the buildroot tarball. The resulting directory may
|
||||
have versioning information on it like buildroot-x.y.z. If so,
|
||||
rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
|
||||
|
||||
4. cd <some-dir>/buildroot
|
||||
|
||||
5. cp configs/cortexm3-defconfig-4.3.3 .config
|
||||
|
||||
6. make oldconfig
|
||||
|
||||
7. make
|
||||
|
||||
8. Edit setenv.h, if necessary, so that the PATH variable includes
|
||||
the path to the newly built binaries.
|
||||
|
||||
See the file configs/README.txt in the buildroot source tree. That has more
|
||||
detailed PLUS some special instructions that you will need to follow if you are
|
||||
building a Cortex-M4 toolchain for Cygwin under Windows.
|
||||
|
||||
KwikStik-K40-specific Configuration Options
|
||||
============================================
|
||||
|
||||
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
|
||||
be set to:
|
||||
|
||||
CONFIG_ARCH=arm
|
||||
|
||||
CONFIG_ARCH_family - For use in C code:
|
||||
|
||||
CONFIG_ARCH_ARM=y
|
||||
|
||||
CONFIG_ARCH_architecture - For use in C code:
|
||||
|
||||
CONFIG_ARCH_CORTEXM4=y
|
||||
|
||||
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||
|
||||
CONFIG_ARCH_CHIP=k40
|
||||
|
||||
CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
|
||||
chip:
|
||||
|
||||
CONFIG_ARCH_CHIP_K40X256VLQ100
|
||||
|
||||
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
|
||||
hence, the board that supports the particular chip or SoC.
|
||||
|
||||
CONFIG_ARCH_BOARD=kwikstik-k40 (for the KwikStik-K40 development board)
|
||||
|
||||
CONFIG_ARCH_BOARD_name - For use in C code
|
||||
|
||||
CONFIG_ARCH_BOARD_KWIKSTIK_K40=y
|
||||
|
||||
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
|
||||
of delay loops
|
||||
|
||||
CONFIG_ENDIAN_BIG - define if big endian (default is little
|
||||
endian)
|
||||
|
||||
CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case):
|
||||
|
||||
CONFIG_DRAM_SIZE=0x00010000 (64Kb)
|
||||
|
||||
CONFIG_DRAM_START - The start address of installed DRAM
|
||||
|
||||
CONFIG_DRAM_START=0x20000000
|
||||
|
||||
CONFIG_DRAM_END - Last address+1 of installed RAM
|
||||
|
||||
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
|
||||
|
||||
CONFIG_ARCH_IRQPRIO - The Kinetis K40 supports interrupt prioritization
|
||||
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
|
||||
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
|
||||
have LEDs
|
||||
|
||||
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
stack. If defined, this symbol is the size of the interrupt
|
||||
stack in bytes. If not defined, the user task stacks will be
|
||||
used during interrupt handling.
|
||||
|
||||
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
|
||||
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
||||
|
||||
CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
|
||||
cause a 100 second delay during boot-up. This 100 second delay
|
||||
serves no purpose other than it allows you to calibratre
|
||||
CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
|
||||
the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
|
||||
the delay actually is 100 seconds.
|
||||
|
||||
Individual subsystems can be enabled:
|
||||
AHB
|
||||
---
|
||||
CONFIG_KINETIS_DMA1
|
||||
CONFIG_KINETIS_DMA2
|
||||
CONFIG_KINETIS_CRC
|
||||
CONFIG_KINETIS_FSMC
|
||||
CONFIG_KINETIS_SDIO
|
||||
|
||||
APB1
|
||||
----
|
||||
CONFIG_KINETIS_TIM2
|
||||
CONFIG_KINETIS_TIM3
|
||||
CONFIG_KINETIS_TIM4
|
||||
CONFIG_KINETIS_TIM5
|
||||
CONFIG_KINETIS_TIM6
|
||||
CONFIG_KINETIS_TIM7
|
||||
CONFIG_KINETIS_WWDG
|
||||
CONFIG_KINETIS_SPI2
|
||||
CONFIG_KINETIS_SPI4
|
||||
CONFIG_KINETIS_USART2
|
||||
CONFIG_KINETIS_USART3
|
||||
CONFIG_KINETIS_UART4
|
||||
CONFIG_KINETIS_UART5
|
||||
CONFIG_KINETIS_I2C1
|
||||
CONFIG_KINETIS_I2C2
|
||||
CONFIG_KINETIS_USB
|
||||
CONFIG_KINETIS_CAN
|
||||
CONFIG_KINETIS_BKP
|
||||
CONFIG_KINETIS_PWR
|
||||
CONFIG_KINETIS_DAC
|
||||
CONFIG_KINETIS_USB
|
||||
|
||||
APB2
|
||||
----
|
||||
CONFIG_KINETIS_ADC1
|
||||
CONFIG_KINETIS_ADC2
|
||||
CONFIG_KINETIS_TIM1
|
||||
CONFIG_KINETIS_SPI1
|
||||
CONFIG_KINETIS_TIM8
|
||||
CONFIG_KINETIS_USART1
|
||||
CONFIG_KINETIS_ADC3
|
||||
|
||||
Alternate pin mappings (should not be used with the KwikStik-K40 board):
|
||||
|
||||
CONFIG_KINETIS_TIM1_FULL_REMAP
|
||||
CONFIG_KINETIS_TIM1_PARTIAL_REMAP
|
||||
CONFIG_KINETIS_TIM2_FULL_REMAP
|
||||
CONFIG_KINETIS_TIM2_PARTIAL_REMAP_1
|
||||
CONFIG_KINETIS_TIM2_PARTIAL_REMAP_2
|
||||
CONFIG_KINETIS_TIM3_FULL_REMAP
|
||||
CONFIG_KINETIS_TIM3_PARTIAL_REMAP
|
||||
CONFIG_KINETIS_TIM4_REMAP
|
||||
CONFIG_KINETIS_USART1_REMAP
|
||||
CONFIG_KINETIS_USART2_REMAP
|
||||
CONFIG_KINETIS_USART3_FULL_REMAP
|
||||
CONFIG_KINETIS_USART3_PARTIAL_REMAP
|
||||
CONFIG_KINETIS_SPI1_REMAP
|
||||
CONFIG_KINETIS_SPI3_REMAP
|
||||
CONFIG_KINETIS_I2C1_REMAP
|
||||
CONFIG_KINETIS_CAN1_FULL_REMAP
|
||||
CONFIG_KINETIS_CAN1_PARTIAL_REMAP
|
||||
CONFIG_KINETIS_CAN2_REMAP
|
||||
|
||||
Kinetis K40 specific device driver settings
|
||||
|
||||
CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the USARTn (n=1,2,3) or UART
|
||||
m (m=4,5) for the console and ttys0 (default is the USART1).
|
||||
CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received.
|
||||
This specific the size of the receive buffer
|
||||
CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before
|
||||
being sent. This specific the size of the transmit buffer
|
||||
CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART. Must be
|
||||
CONFIG_U[S]ARTn_BITS - The number of bits. Must be either 7 or 8.
|
||||
CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
||||
CONFIG_U[S]ARTn_2STOP - Two stop bits
|
||||
|
||||
CONFIG_KINETIS_SPI_INTERRUPTS - Select to enable interrupt driven SPI
|
||||
support. Non-interrupt-driven, poll-waiting is recommended if the
|
||||
interrupt rate would be to high in the interrupt driven case.
|
||||
CONFIG_KINETIS_SPI_DMA - Use DMA to improve SPI transfer performance.
|
||||
Cannot be used with CONFIG_KINETIS_SPI_INTERRUPT.
|
||||
|
||||
CONFIG_SDIO_DMA - Support DMA data transfers. Requires CONFIG_KINETIS_SDIO
|
||||
and CONFIG_KINETIS_DMA2.
|
||||
CONFIG_SDIO_PRI - Select SDIO interrupt prority. Default: 128
|
||||
CONFIG_SDIO_DMAPRIO - Select SDIO DMA interrupt priority.
|
||||
Default: Medium
|
||||
CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode. Default:
|
||||
4-bit transfer mode.
|
||||
|
||||
KwikStik-K40 LCD Hardware Configuration
|
||||
|
||||
CONFIG_LCD_LANDSCAPE - Define for 320x240 display "landscape"
|
||||
support. Default is this 320x240 "landscape" orientation
|
||||
(this setting is informative only... not used).
|
||||
CONFIG_LCD_PORTRAIT - Define for 240x320 display "portrait"
|
||||
orientation support. In this orientation, the KwikStik-K40's
|
||||
LCD ribbon cable is at the bottom of the display. Default is
|
||||
320x240 "landscape" orientation.
|
||||
CONFIG_LCD_RPORTRAIT - Define for 240x320 display "reverse
|
||||
portrait" orientation support. In this orientation, the
|
||||
KwikStik-K40's LCD ribbon cable is at the top of the display.
|
||||
Default is 320x240 "landscape" orientation.
|
||||
CONFIG_LCD_BACKLIGHT - Define to support an adjustable backlight
|
||||
using timer 1. The granularity of the settings is determined
|
||||
by CONFIG_LCD_MAXPOWER. Requires CONFIG_KINETIS_TIM1.
|
||||
|
||||
Configurations
|
||||
==============
|
||||
|
||||
Each KwikStik-K40 configuration is maintained in a sudirectory and
|
||||
can be selected as follow:
|
||||
|
||||
cd tools
|
||||
./configure.sh kwikstik-k40/<subdir>
|
||||
cd -
|
||||
. ./setenv.sh
|
||||
|
||||
Where <subdir> is one of the following:
|
||||
|
||||
ostest:
|
||||
------
|
||||
This configuration directory, performs a simple OS test using
|
||||
examples/ostest. By default, this project assumes that you are
|
||||
using the DFU bootloader.
|
||||
|
||||
CONFIG_KINETIS_BUILDROOT=y : NuttX buildroot under Linux or Cygwin
|
||||
Executable
+135
@@ -0,0 +1,135 @@
|
||||
/************************************************************************************
|
||||
* configs/kwikstik-k40/include/board.h
|
||||
* include/arch/board/board.h
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ARCH_BOARD_BOARD_H
|
||||
#define __ARCH_BOARD_BOARD_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#ifndef __ASSEMBLY__
|
||||
# include <stdint.h>
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Clocking *************************************************************************/
|
||||
|
||||
/* LED definitions ******************************************************************/
|
||||
|
||||
#define LED_STARTED 0
|
||||
#define LED_HEAPALLOCATE 1
|
||||
#define LED_IRQSENABLED 2
|
||||
#define LED_STACKCREATED 3
|
||||
#define LED_INIRQ 4
|
||||
#define LED_SIGNAL 5
|
||||
#define LED_ASSERTION 6
|
||||
#define LED_PANIC 7
|
||||
|
||||
/* Button definitions ***************************************************************/
|
||||
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
#define EXTERN extern "C"
|
||||
extern "C" {
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************/
|
||||
/************************************************************************************
|
||||
* Name: k40_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the intitialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
EXTERN void k40_boardinitialize(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Button support.
|
||||
*
|
||||
* Description:
|
||||
* up_buttoninit() must be called to initialize button resources. After
|
||||
* that, up_buttons() may be called to collect the current state of all
|
||||
* buttons or up_irqbutton() may be called to register button interrupt
|
||||
* handlers.
|
||||
*
|
||||
* After up_buttoninit() has been called, up_buttons() may be called to
|
||||
* collect the state of all buttons. up_buttons() returns an 8-bit bit set
|
||||
* with each bit associated with a button. See the BUTTON_*_BIT and JOYSTICK_*_BIT
|
||||
* definitions in board.h for the meaning of each bit.
|
||||
*
|
||||
* up_irqbutton() may be called to register an interrupt handler that will
|
||||
* be called when a button is depressed or released. The ID value is a
|
||||
* button enumeration value that uniquely identifies a button resource. See the
|
||||
* BUTTON_* and JOYSTICK_* definitions in board.h for the meaning of enumeration
|
||||
* value. The previous interrupt handler address is returned (so that it may
|
||||
* restored, if so desired).
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_BUTTONS
|
||||
EXTERN void up_buttoninit(void);
|
||||
EXTERN uint8_t up_buttons(void);
|
||||
#ifdef CONFIG_ARCH_IRQBUTTONS
|
||||
EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __ARCH_BOARD_BOARD_H */
|
||||
@@ -0,0 +1,162 @@
|
||||
############################################################################
|
||||
# configs/kwikstik-k40/ostest/Make.defs
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
|
||||
# Setup for the selected toolchain
|
||||
|
||||
ifeq ($(CONFIG_KINETIS_CODESOURCERYW),y)
|
||||
# CodeSourcery under Windows
|
||||
CROSSDEV = arm-none-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_KINETIS_CODESOURCERYL),y)
|
||||
# CodeSourcery under Linux
|
||||
CROSSDEV = arm-none-eabi-
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
MAXOPTIMIZATION = -O2
|
||||
endif
|
||||
ifeq ($(CONFIG_KINETIS_DEVKITARM),y)
|
||||
# devkitARM under Windows
|
||||
CROSSDEV = arm-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_KINETIS_BUILDROOT),y)
|
||||
# NuttX buildroot under Linux or Cygwin
|
||||
CROSSDEV = arm-elf-
|
||||
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
|
||||
MAXOPTIMIZATION = -Os
|
||||
endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
define PREPROCESS
|
||||
@echo "CPP: $1->$2"
|
||||
@$(CPP) $(CPPFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define COMPILE
|
||||
@echo "CC: $1"
|
||||
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define COMPILEXX
|
||||
@echo "CXX: $1"
|
||||
@$(CXX) -c $(CXXFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ASSEMBLE
|
||||
@echo "AS: $1"
|
||||
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ARCHIVE
|
||||
echo "AR: $2"; \
|
||||
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||
endef
|
||||
|
||||
define CLEAN
|
||||
@rm -f *.o *.a
|
||||
endef
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
@@ -0,0 +1,39 @@
|
||||
############################################################################
|
||||
# configs/kwikstik-k40/ostest/appconfig
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
# Path to example in apps/examples containing the user_start entry point
|
||||
|
||||
CONFIGURED_APPS += examples/ostest
|
||||
|
||||
Executable
+849
File diff suppressed because it is too large
Load Diff
Executable
+110
@@ -0,0 +1,110 @@
|
||||
/****************************************************************************
|
||||
* configs/kwikstik-k40/ostest/ld.script
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The K40X256VLQ100 has 256Kb of FLASH beginning at address 0x0800:0000 and
|
||||
* 256Kb of FlexMemory beginning at address 0x2000:0000. When booting from FLASH,
|
||||
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
|
||||
* begin execution by jumping to the entry point in the 0x0800:0000 address
|
||||
* range.
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
flash (rx) : ORIGIN = 0x08000000, LENGTH = 256K
|
||||
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 256K
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > flash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} >sram
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
Executable
+61
@@ -0,0 +1,61 @@
|
||||
#!/bin/bash
|
||||
# configs/kwikstik-k40/ostest/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
|
||||
# This the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
echo "PATH : ${PATH}"
|
||||
Executable
+93
@@ -0,0 +1,93 @@
|
||||
############################################################################
|
||||
# configs/kwikstik-k40/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
CFLAGS += -I$(TOPDIR)/sched
|
||||
|
||||
ASRCS =
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
|
||||
CSRCS = up_boot.c up_lcd.c up_leds.c up_buttons.c up_spi.c up_usbdev.c
|
||||
|
||||
ifeq ($(CONFIG_NSH_ARCHINIT),y)
|
||||
CSRCS += up_nsh.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_USBSTRG),y)
|
||||
CSRCS += up_usbstrg.c
|
||||
endif
|
||||
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
OBJS = $(AOBJS) $(COBJS)
|
||||
|
||||
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
|
||||
ifeq ($(WINTOOL),y)
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/cortexm3}"
|
||||
else
|
||||
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/cortexm3
|
||||
endif
|
||||
|
||||
all: libboard$(LIBEXT)
|
||||
|
||||
$(AOBJS): %$(OBJEXT): %.S
|
||||
$(call ASSEMBLE, $<, $@)
|
||||
|
||||
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
||||
$(call COMPILE, $<, $@)
|
||||
|
||||
libboard$(LIBEXT): $(OBJS)
|
||||
@( for obj in $(OBJS) ; do \
|
||||
$(call ARCHIVE, $@, $${obj}); \
|
||||
done ; )
|
||||
|
||||
.depend: Makefile $(SRCS)
|
||||
@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||
@touch $@
|
||||
|
||||
depend: .depend
|
||||
|
||||
clean:
|
||||
@rm -f libboard$(LIBEXT) *~ .*.swp
|
||||
$(call CLEAN)
|
||||
|
||||
distclean: clean
|
||||
@rm -f Make.dep .depend
|
||||
|
||||
-include Make.dep
|
||||
Executable
+110
@@ -0,0 +1,110 @@
|
||||
/************************************************************************************
|
||||
* configs/kwikstik-k40/src/kwikstik_internal.h
|
||||
* arch/arm/src/board/kwikstik_internal.n
|
||||
*
|
||||
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __CONFIGS_KWIKSTK_K40_SRC_KWIKSTIK_INTERNAL_H
|
||||
#define __CONFIGS_KWIKSTK_K40_SRC_KWIKSTIK_INTERNAL_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
#include <stdint.h>
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* How many SPI modules does this chip support? The LM3S6918 supports 2 SPI
|
||||
* modules (others may support more -- in such case, the following must be
|
||||
* expanded).
|
||||
*/
|
||||
|
||||
#if KINETIS_NSPI < 1
|
||||
# undef CONFIG_KINETIS_SPI1
|
||||
# undef CONFIG_KINETIS_SPI2
|
||||
#elif KINETIS_NSPI < 2
|
||||
# undef CONFIG_KINETIS_SPI2
|
||||
#endif
|
||||
|
||||
/* KwikStik-K40 GPIOs ***************************************************************/
|
||||
|
||||
/* LEDs */
|
||||
|
||||
/* BUTTONS -- NOTE that some have EXTI interrupts configured */
|
||||
|
||||
/* SPI FLASH chip select */
|
||||
|
||||
/* USB Soft Connect Pullup */
|
||||
|
||||
/************************************************************************************
|
||||
* Public Types
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: kinetis_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the KwikStik-K40 board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
extern void weak_function kinetis_spiinitialize(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: kinetis_usbinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to setup USB-related GPIO pins for the KwikStik-K40 board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
extern void weak_function kinetis_usbinitialize(void);
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIGS_KWIKSTK_K40_SRC_KWIKSTIK_INTERNAL_H */
|
||||
|
||||
Executable
+102
@@ -0,0 +1,102 @@
|
||||
/************************************************************************************
|
||||
* configs/kwikstik-k40/src/up_boot.c
|
||||
* arch/arm/src/board/up_boot.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <debug.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "kwikstik-internal.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: kinetis_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All Kinetis architectures must provide the following entry point. This entry
|
||||
* point is called early in the initialization -- after all memory has been
|
||||
* configured and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void kinetis_boardinitialize(void)
|
||||
{
|
||||
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
|
||||
* kinetis_spiinitialize() has been brought into the link.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_KINETIS_SPI1) || defined(CONFIG_KINETIS_SPI2)
|
||||
if (kinetis_spiinitialize)
|
||||
{
|
||||
kinetis_spiinitialize();
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not
|
||||
* disabled, and 3) the weak function kinetis_usbinitialize() has been brought
|
||||
* into the build.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_USBDEV) && defined(CONFIG_KINETIS_USB)
|
||||
if (kinetis_usbinitialize)
|
||||
{
|
||||
kinetis_usbinitialize();
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Configure on-board LEDs if LED support has been selected. */
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
up_ledinit();
|
||||
#endif
|
||||
}
|
||||
@@ -0,0 +1,172 @@
|
||||
/****************************************************************************
|
||||
* configs/kwikstik-k40/src/up_buttons.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
#include "kwikstik-internal.h"
|
||||
|
||||
#ifdef CONFIG_ARCH_BUTTONS
|
||||
|
||||
/****************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
/* Pin configuration for each KwikStik-K40 button. This array is indexed by
|
||||
* the BUTTON_* definitions in board.h
|
||||
*/
|
||||
|
||||
#if 0
|
||||
static const uint16_t g_buttons[NUM_BUTTONS] =
|
||||
{
|
||||
};
|
||||
#endif
|
||||
#warning "Missing logic"
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_buttoninit
|
||||
*
|
||||
* Description:
|
||||
* up_buttoninit() must be called to initialize button resources. After
|
||||
* that, up_buttons() may be called to collect the current state of all
|
||||
* buttons or up_irqbutton() may be called to register button interrupt
|
||||
* handlers.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void up_buttoninit(void)
|
||||
{
|
||||
#if 0
|
||||
int i;
|
||||
|
||||
/* Configure the GPIO pins as inputs. */
|
||||
|
||||
for (i = 0; i < NUM_BUTTONS; i++)
|
||||
{
|
||||
kinetis_configgpio(g_buttons[i]);
|
||||
}
|
||||
#else
|
||||
#warning "Missing logic"
|
||||
#endif
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_buttons
|
||||
****************************************************************************/
|
||||
|
||||
uint8_t up_buttons(void)
|
||||
{
|
||||
#if 0
|
||||
uint8_t ret = 0;
|
||||
int i;
|
||||
|
||||
/* Check that state of each key */
|
||||
|
||||
for (i = 0; i < NUM_BUTTONS; i++)
|
||||
{
|
||||
/* A LOW value means that the key is pressed for most keys */
|
||||
|
||||
bool released = kinetis_gpioread(g_buttons[i]);
|
||||
|
||||
/* Accumulate the set of depressed (not released) keys */
|
||||
|
||||
if (!released)
|
||||
{
|
||||
ret |= (1 << i);
|
||||
}
|
||||
}
|
||||
|
||||
return ret;
|
||||
#else
|
||||
#warning "Missing logic"
|
||||
return 0;
|
||||
#endif
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Button support.
|
||||
*
|
||||
* Description:
|
||||
* up_buttoninit() must be called to initialize button resources. After
|
||||
* that, up_buttons() may be called to collect the current state of all
|
||||
* buttons or up_irqbutton() may be called to register button interrupt
|
||||
* handlers.
|
||||
*
|
||||
* After up_buttoninit() has been called, up_buttons() may be called to
|
||||
* collect the state of all buttons. up_buttons() returns an 8-bit bit set
|
||||
* with each bit associated with a button. See the BUTTON_*_BIT and JOYSTICK_*_BIT
|
||||
* definitions in board.h for the meaning of each bit.
|
||||
*
|
||||
* up_irqbutton() may be called to register an interrupt handler that will
|
||||
* be called when a button is depressed or released. The ID value is a
|
||||
* button enumeration value that uniquely identifies a button resource. See the
|
||||
* BUTTON_* and JOYSTICK_* definitions in board.h for the meaning of enumeration
|
||||
* value. The previous interrupt handler address is returned (so that it may
|
||||
* restored, if so desired).
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_IRQBUTTONS
|
||||
xcpt_t up_irqbutton(int id, xcpt_t irqhandler)
|
||||
{
|
||||
xcpt_t oldhandler = NULL;
|
||||
|
||||
/* The following should be atomic */
|
||||
|
||||
if (id >= MIN_IRQBUTTON && id <= MAX_IRQBUTTON)
|
||||
{
|
||||
oldhandler = kinetis_gpiosetevent(g_buttons[id], true, true, true, irqhandler);
|
||||
}
|
||||
return oldhandler;
|
||||
}
|
||||
#endif
|
||||
#endif /* CONFIG_ARCH_BUTTONS */
|
||||
Executable
+125
@@ -0,0 +1,125 @@
|
||||
/**************************************************************************************
|
||||
* configs/kwikstik-k40/src/up_lcd.c
|
||||
* arch/arm/src/board/up_lcd.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
/**************************************************************************************
|
||||
* Included Files
|
||||
**************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include "kwikstik-internal.h"
|
||||
|
||||
/**************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
**************************************************************************************/
|
||||
|
||||
/* Configuration **********************************************************************/
|
||||
|
||||
/* Display/Color Properties ***********************************************************/
|
||||
|
||||
/* Debug ******************************************************************************/
|
||||
|
||||
#ifdef CONFIG_DEBUG_LCD
|
||||
# define lcddbg(format, arg...) vdbg(format, ##arg)
|
||||
#else
|
||||
# define lcddbg(x...)
|
||||
#endif
|
||||
|
||||
/**************************************************************************************
|
||||
* Private Type Definition
|
||||
**************************************************************************************/
|
||||
|
||||
/**************************************************************************************
|
||||
* Private Function Protototypes
|
||||
**************************************************************************************/
|
||||
|
||||
/**************************************************************************************
|
||||
* Private Data
|
||||
**************************************************************************************/
|
||||
|
||||
/**************************************************************************************
|
||||
* Private Functions
|
||||
**************************************************************************************/
|
||||
|
||||
/**************************************************************************************
|
||||
* Public Functions
|
||||
**************************************************************************************/
|
||||
|
||||
/**************************************************************************************
|
||||
* Name: up_lcdinitialize
|
||||
*
|
||||
* Description:
|
||||
* Initialize the LCD video hardware. The initial state of the LCD is fully
|
||||
* initialized, display memory cleared, and the LCD ready to use, but with the power
|
||||
* setting at 0 (full off).
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
int up_lcdinitialize(void)
|
||||
{
|
||||
gvdbg("Initializing\n");
|
||||
#warning "Missing logic"
|
||||
return OK;
|
||||
}
|
||||
|
||||
/**************************************************************************************
|
||||
* Name: up_lcdgetdev
|
||||
*
|
||||
* Description:
|
||||
* Return a a reference to the LCD object for the specified LCD. This allows support
|
||||
* for multiple LCD devices.
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
FAR struct lcd_dev_s *up_lcdgetdev(int lcddev)
|
||||
{
|
||||
DEBUGASSERT(lcddev == 0);
|
||||
#warning "Missing logic"
|
||||
return NULL;
|
||||
}
|
||||
|
||||
/**************************************************************************************
|
||||
* Name: up_lcduninitialize
|
||||
*
|
||||
* Description:
|
||||
* Unitialize the LCD support
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
void up_lcduninitialize(void)
|
||||
{
|
||||
#warning "Missing logic"
|
||||
}
|
||||
|
||||
Executable
+113
@@ -0,0 +1,113 @@
|
||||
/****************************************************************************
|
||||
* configs/kwikstik-k40/src/up_leds.c
|
||||
* arch/arm/src/board/up_leds.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "up_arch.h"
|
||||
#include "up_internal.h"
|
||||
#include "kinetis_internal.h"
|
||||
#include "kwistik-internal.h"
|
||||
|
||||
/****************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* Enables debug output from this file (needs CONFIG_DEBUG with
|
||||
* CONFIG_DEBUG_VERBOSE too)
|
||||
*/
|
||||
|
||||
#undef LED_DEBUG /* Define to enable debug */
|
||||
|
||||
#ifdef LED_DEBUG
|
||||
# define leddbg lldbg
|
||||
# define ledvdbg llvdbg
|
||||
#else
|
||||
# define leddbg(x...)
|
||||
# define ledvdbg(x...)
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledinit
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
void up_ledinit(void)
|
||||
{
|
||||
# warning "Missing logic"
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledon
|
||||
****************************************************************************/
|
||||
|
||||
void up_ledon(int led)
|
||||
{
|
||||
# warning "Missing logic"
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledoff
|
||||
****************************************************************************/
|
||||
|
||||
void up_ledoff(int led)
|
||||
{
|
||||
# warning "Missing logic"
|
||||
}
|
||||
|
||||
#endif /* CONFIG_ARCH_LEDS */
|
||||
Executable
+139
@@ -0,0 +1,139 @@
|
||||
/****************************************************************************
|
||||
* config/kwikstik-k40/src/up_nsh.c
|
||||
* arch/arm/src/board/up_nsh.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdio.h>
|
||||
#include <debug.h>
|
||||
#include <errno.h>
|
||||
|
||||
#ifdef CONFIG_KINETIS_SPI1
|
||||
# include <nuttx/spi.h>
|
||||
# include <nuttx/mtd.h>
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_KINETIS_SDIO
|
||||
# include <nuttx/sdio.h>
|
||||
# include <nuttx/mmcsd.h>
|
||||
#endif
|
||||
|
||||
#include "kinetis_internal.h"
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-Processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* Configuration ************************************************************/
|
||||
|
||||
/* For now, don't build in any SPI1 support -- NSH is not using it */
|
||||
|
||||
#undef CONFIG_KINETIS_SPI1
|
||||
|
||||
/* PORT and SLOT number probably depend on the board configuration */
|
||||
|
||||
#ifdef CONFIG_ARCH_BOARD_KWIKSTIK_K40
|
||||
# define CONFIG_NSH_HAVEUSBDEV 1
|
||||
# define CONFIG_NSH_HAVEMMCSD 1
|
||||
# if defined(CONFIG_NSH_MMCSDSLOTNO) && CONFIG_NSH_MMCSDSLOTNO != 0
|
||||
# error "Only one MMC/SD slot"
|
||||
# undef CONFIG_NSH_MMCSDSLOTNO
|
||||
# endif
|
||||
# ifndef CONFIG_NSH_MMCSDSLOTNO
|
||||
# define CONFIG_NSH_MMCSDSLOTNO 0
|
||||
# endif
|
||||
#else
|
||||
/* Add configuration for new Kinetis boards here */
|
||||
# error "Unrecognized Kinetis board"
|
||||
# undef CONFIG_NSH_HAVEUSBDEV
|
||||
# undef CONFIG_NSH_HAVEMMCSD
|
||||
#endif
|
||||
|
||||
/* Can't support USB features if USB is not enabled */
|
||||
|
||||
#ifndef CONFIG_USBDEV
|
||||
# undef CONFIG_NSH_HAVEUSBDEV
|
||||
#endif
|
||||
|
||||
/* Can't support MMC/SD features if mountpoints are disabled or if SDIO support
|
||||
* is not enabled.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_KINETIS_SDIO)
|
||||
# undef CONFIG_NSH_HAVEMMCSD
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_NSH_MMCSDMINOR
|
||||
# define CONFIG_NSH_MMCSDMINOR 0
|
||||
#endif
|
||||
|
||||
/* Debug ********************************************************************/
|
||||
|
||||
#ifdef CONFIG_CPP_HAVE_VARARGS
|
||||
# ifdef CONFIG_DEBUG
|
||||
# define message(...) lib_lowprintf(__VA_ARGS__)
|
||||
# else
|
||||
# define message(...) printf(__VA_ARGS__)
|
||||
# endif
|
||||
#else
|
||||
# ifdef CONFIG_DEBUG
|
||||
# define message lib_lowprintf
|
||||
# else
|
||||
# define message printf
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: nsh_archinitialize
|
||||
*
|
||||
* Description:
|
||||
* Perform architecture specific initialization
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
int nsh_archinitialize(void)
|
||||
{
|
||||
# warning "Missing logic"
|
||||
return OK;
|
||||
}
|
||||
Executable
+164
@@ -0,0 +1,164 @@
|
||||
/************************************************************************************
|
||||
* configs/kwikstik-k40/src/up_spi.c
|
||||
* arch/arm/src/board/up_spi.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/spi.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "chip.h"
|
||||
#include "kinetis_internal.h"
|
||||
#include "kwikstick-internal.h"
|
||||
|
||||
#if defined(CONFIG_KINETIS_SPI1) || defined(CONFIG_KINETIS_SPI2)
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Enables debug output from this file (needs CONFIG_DEBUG too) */
|
||||
|
||||
#ifdef CONFIG_DEBUG_SPI
|
||||
# define spidbg lldbg
|
||||
# ifdef CONFIG_DEBUG_SPI_VERBOSE
|
||||
# define spivdbg lldbg
|
||||
# else
|
||||
# define spivdbg(x...)
|
||||
# endif
|
||||
#else
|
||||
# undef CONFIG_DEBUG_SPI_VERBOSE
|
||||
# define spidbg(x...)
|
||||
# define spivdbg(x...)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: kinetis_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the KwikStik-K40 board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void weak_function kinetis_spiinitialize(void)
|
||||
{
|
||||
# warning "Missing logic"
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: kinetis_spi1/2/3select and kinetis_spi1/2/3status
|
||||
*
|
||||
* Description:
|
||||
* The external functions, kinetis_spi1/2/3select and kinetis_spi1/2/3status must be
|
||||
* provided by board-specific logic. They are implementations of the select
|
||||
* and status methods of the SPI interface defined by struct spi_ops_s (see
|
||||
* include/nuttx/spi.h). All other methods (including up_spiinitialize())
|
||||
* are provided by common Kinetis logic. To use this common SPI logic on your
|
||||
* board:
|
||||
*
|
||||
* 1. Provide logic in kinetis_boardinitialize() to configure SPI chip select
|
||||
* pins.
|
||||
* 2. Provide kinetis_spi1/2/3select() and kinetis_spi1/2/3status() functions in your
|
||||
* board-specific logic. These functions will perform chip selection and
|
||||
* status operations using GPIOs in the way your board is configured.
|
||||
* 3. Add a calls to up_spiinitialize() in your low level application
|
||||
* initialization logic
|
||||
* 4. The handle returned by up_spiinitialize() may then be used to bind the
|
||||
* SPI driver to higher level logic (e.g., calling
|
||||
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
|
||||
* the SPI MMC/SD driver).
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_KINETIS_SPI1
|
||||
void kinetis_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
# warning "Missing logic"
|
||||
}
|
||||
|
||||
uint8_t kinetis_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
# warning "Missing logic"
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_KINETIS_SPI2
|
||||
void kinetis_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
# warning "Missing logic"
|
||||
}
|
||||
|
||||
uint8_t kinetis_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
# warning "Missing logic"
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_KINETIS_SPI3
|
||||
void kinetis_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
# warning "Missing logic"
|
||||
}
|
||||
|
||||
uint8_t kinetis_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
# warning "Missing logic"
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* CONFIG_KINETIS_SPI1 || CONFIG_KINETIS_SPI2 */
|
||||
@@ -0,0 +1,115 @@
|
||||
/************************************************************************************
|
||||
* configs/kwikstik-k40/src/up_usbdev.c
|
||||
* arch/arm/src/board/up_boot.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <sys/types.h>
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/usb/usbdev.h>
|
||||
#include <nuttx/usb/usbdev_trace.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "kinetis_internal.h"
|
||||
#include "kwikstik-internal.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: kinetis_usbinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to setup USB-related GPIO pins for the KwikStik-K40 board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void kinetis_usbinitialize(void)
|
||||
{
|
||||
# warning "Missing logic"
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Name: kinetis_usbpullup
|
||||
*
|
||||
* Description:
|
||||
* If USB is supported and the board supports a pullup via GPIO (for USB software
|
||||
* connect and disconnect), then the board software must provide kinetis_pullup.
|
||||
* See include/nuttx/usb/usbdev.h for additional description of this method.
|
||||
* Alternatively, if no pull-up GPIO the following EXTERN can be redefined to be
|
||||
* NULL.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
int kinetis_usbpullup(FAR struct usbdev_s *dev, bool enable)
|
||||
{
|
||||
usbtrace(TRACE_DEVPULLUP, (uint16_t)enable);
|
||||
# warning "Missing logic"
|
||||
return OK;
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Name: kinetis_usbsuspend
|
||||
*
|
||||
* Description:
|
||||
* Board logic must provide the kinetis_usbsuspend logic if the USBDEV driver is
|
||||
* used. This function is called whenever the USB enters or leaves suspend mode.
|
||||
* This is an opportunity for the board logic to shutdown clocks, power, etc.
|
||||
* while the USB is suspended.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void kinetis_usbsuspend(FAR struct usbdev_s *dev, bool resume)
|
||||
{
|
||||
ulldbg("resume: %d\n", resume);
|
||||
#warning "Missing logic"
|
||||
}
|
||||
|
||||
Executable
+118
@@ -0,0 +1,118 @@
|
||||
/****************************************************************************
|
||||
* configs/kwikstik-k40/src/up_usbstrg.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Configure and register the Kinetis MMC/SD block driver.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdio.h>
|
||||
#include <debug.h>
|
||||
#include <errno.h>
|
||||
|
||||
#include <nuttx/sdio.h>
|
||||
#include <nuttx/mmcsd.h>
|
||||
|
||||
#include "kinetis_internal.h"
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-Processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* Configuration ************************************************************/
|
||||
|
||||
#ifndef CONFIG_EXAMPLES_USBSTRG_DEVMINOR1
|
||||
# define CONFIG_EXAMPLES_USBSTRG_DEVMINOR1 0
|
||||
#endif
|
||||
|
||||
/* SLOT number(s) could depend on the board configuration */
|
||||
|
||||
#ifdef CONFIG_ARCH_BOARD_KWIKSTIK_K40
|
||||
# undef KINETIS_MMCSDSLOTNO
|
||||
# define KINETIS_MMCSDSLOTNO 0
|
||||
#else
|
||||
/* Add configuration for new Kinetis boards here */
|
||||
# error "Unrecognized Kinetis board"
|
||||
#endif
|
||||
|
||||
/* Debug ********************************************************************/
|
||||
|
||||
#ifdef CONFIG_CPP_HAVE_VARARGS
|
||||
# ifdef CONFIG_DEBUG
|
||||
# define message(...) lib_lowprintf(__VA_ARGS__)
|
||||
# define msgflush()
|
||||
# else
|
||||
# define message(...) printf(__VA_ARGS__)
|
||||
# define msgflush() fflush(stdout)
|
||||
# endif
|
||||
#else
|
||||
# ifdef CONFIG_DEBUG
|
||||
# define message lib_lowprintf
|
||||
# define msgflush()
|
||||
# else
|
||||
# define message printf
|
||||
# define msgflush() fflush(stdout)
|
||||
# endif
|
||||
#endif
|
||||
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: usbstrg_archinitialize
|
||||
*
|
||||
* Description:
|
||||
* Perform architecture specific initialization
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
int usbstrg_archinitialize(void)
|
||||
{
|
||||
/* If examples/usbstrg is built as an NSH command, then SD slot should
|
||||
* already have been initized in nsh_archinitialize() (see up_nsh.c). In
|
||||
* this case, there is nothing further to be done here.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_EXAMPLES_USBSTRG_BUILTIN
|
||||
# warning "Missing logic"
|
||||
#endif /* CONFIG_EXAMPLES_USBSTRG_BUILTIN */
|
||||
|
||||
return OK;
|
||||
}
|
||||
Reference in New Issue
Block a user