Add resource.h and fixed frequently cloned typo

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3642 42af7a65-404d-4744-a932-0658087f49c3

Documentation/NuttxPortingGuide.html

@@ -3041,8 +3041,8 @@ build
     handle and enables the API mm_addregion(start, end);
   </li>
   <li>
-    <code>CONFIG_TICKS_PER_MSEC</code>: The default system timer is 100Hz
-    or <code>TICKS_PER_MSEC</code>=10.  This setting may be defined to inform NuttX
+    <code>CONFIG_MSEC_PER_TICK</code>: The default system timer is 100Hz
+    or <code>MSEC_PER_TICK</code>=10.  This setting may be defined to inform NuttX
     that the processor hardware is providing system timer interrupts at some interrupt
     interval other than 10 msec.
   </li>

arch/avr/src/at32uc3/at32uc3_timerisr.c

@@ -61,8 +61,8 @@
  * setting that defaults to 100 (100 ticks per second = 10 MS interval).
  *
  * However, the AVR RTC does not support that default value well and so, we
- * will insist that default is over-ridden by CONFIG_TICKS_PER_MSEC in the
- * configuration file.  Further, we will insist that CONFIG_TICKS_PER_MSEC
+ * will insist that default is over-ridden by CONFIG_MSEC_PER_TICK in the
+ * configuration file.  Further, we will insist that CONFIG_MSEC_PER_TICK
  * have the value 8 (see reasoning below).
  */
 

configs/README.txt

@@ -261,8 +261,8 @@ defconfig -- This is a configuration file similar to the Linux
 		  regions of memory to allocate from, this specifies the
 		  number of memory regions that the memory manager must
 		  handle and enables the API mm_addregion(start, end);
-		CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-		  or TICKS_PER_MSEC=10.  This setting may be defined to
+		CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+		  or MSEC_PER_TICK=10.  This setting may be defined to
 		  inform NuttX that the processor hardware is providing
 		  system timer interrupts at some interrupt interval other
 		  than 10 msec.

configs/avr32dev1/nsh/defconfig

@@ -228,8 +228,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/avr32dev1/ostest/defconfig

@@ -228,8 +228,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/c5471evm/httpd/defconfig

@@ -147,8 +147,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/c5471evm/nettest/defconfig

@@ -147,8 +147,8 @@ CONFIG_NET_C5471_BASET10=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/c5471evm/nsh/defconfig

@@ -147,8 +147,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/c5471evm/ostest/defconfig

@@ -147,8 +147,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/demo9s12ne64/ostest/defconfig

@@ -207,8 +207,8 @@ CONFIG_PASS1_OBJECT=
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/detron/hidkbd/defconfig

@@ -246,8 +246,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/detron/nsh/defconfig

@@ -250,8 +250,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/detron/ostest/defconfig

@@ -242,8 +242,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/detron/wlan/defconfig

@@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ea3131/nsh/defconfig

@@ -213,8 +213,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ea3131/ostest/defconfig

@@ -213,8 +213,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ea3131/pgnsh/defconfig

@@ -221,8 +221,8 @@ CONFIG_PASS1_OBJECT=locked.r
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ea3131/usbserial/defconfig

@@ -213,8 +213,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ea3131/usbstorage/defconfig

@@ -213,8 +213,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/eagle100/httpd/defconfig

@@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/eagle100/nettest/defconfig

@@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/eagle100/nsh/defconfig

@@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/eagle100/nxflat/defconfig

@@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/eagle100/ostest/defconfig

@@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/eagle100/thttpd/defconfig

@@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ez80f910200kitg/ostest/defconfig

@@ -181,8 +181,8 @@ CONFIG_HAVE_LIBM=n
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ez80f910200zco/dhcpd/defconfig

@@ -186,8 +186,8 @@ CONFIG_HAVE_LIBM=n
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ez80f910200zco/httpd/defconfig

@@ -186,8 +186,8 @@ CONFIG_HAVE_LIBM=n
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ez80f910200zco/nettest/defconfig

@@ -186,8 +186,8 @@ CONFIG_HAVE_LIBM=n
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ez80f910200zco/nsh/defconfig

@@ -186,8 +186,8 @@ CONFIG_HAVE_LIBM=n
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ez80f910200zco/ostest/defconfig

@@ -184,8 +184,8 @@ CONFIG_HAVE_LIBM=n
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ez80f910200zco/poll/defconfig

@@ -186,8 +186,8 @@ CONFIG_HAVE_LIBM=n
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lm3s6965-ek/nsh/defconfig

@@ -229,8 +229,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lm3s6965-ek/nx/defconfig

@@ -234,8 +234,8 @@ CONFIG_SPI_CMDDATA=y
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lm3s6965-ek/ostest/defconfig

@@ -229,8 +229,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lm3s8962-ek/nsh/defconfig

@@ -229,8 +229,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lm3s8962-ek/nx/defconfig

@@ -234,8 +234,8 @@ CONFIG_SPI_CMDDATA=y
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lm3s8962-ek/ostest/defconfig

@@ -229,8 +229,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lpcxpresso-lpc1768/dhcpd/defconfig

@@ -250,8 +250,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lpcxpresso-lpc1768/nsh/defconfig

@@ -255,8 +255,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lpcxpresso-lpc1768/nx/defconfig

@@ -254,8 +254,8 @@ CONFIG_SPI_CMDDATA=y
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lpcxpresso-lpc1768/ostest/defconfig

@@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lpcxpresso-lpc1768/thttpd/defconfig

@@ -252,8 +252,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lpcxpresso-lpc1768/usbstorage/defconfig

@@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/m68332evb/defconfig

@@ -117,8 +117,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/mbed/hidkbd/defconfig

@@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/mbed/nsh/defconfig

@@ -242,8 +242,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/mcu123-lpc214x/nsh/defconfig

@@ -151,8 +151,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/mcu123-lpc214x/ostest/defconfig

@@ -151,8 +151,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/mcu123-lpc214x/usbserial/defconfig

@@ -151,8 +151,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.