Freedom-K64F: Enable built-in applications in all configurations

configs/freedom-k64f/README.txt

@@ -855,13 +855,16 @@ Where <subdir> is one of the following:
     4. SDHC support is not enabled in this configuration.  Refer to the
        configuration settings listed above under "SD Card Support".
 
-    5. No external pullup is available on MDIO signal when MK64FN1M0VLL12 MCU
+    5. Support for NSH built-in applications is enabled, but no built-in
+       applications have been configured in.
+
+    6. No external pullup is available on MDIO signal when MK64FN1M0VLL12 MCU
        is requests status of the Ethernet link connection. Internal pullup is
        required when port configuration for MDIO signal is enabled:
 
        CONFIG_KINETIS_ENET_MDIOPULLUP=y
 
-    6. Configured to use a fixed IPv4 address:
+    7. Configured to use a fixed IPv4 address:
 
        CONFIG_NSH_IPADDR=0x0a000002
        CONFIG_NSH_DRIPADDR=0x0a000001
@@ -899,7 +902,10 @@ Where <subdir> is one of the following:
     3. The Serial Console is provided on UART3 with the correct pin
        configuration for use with an Arduino Serial Shield.
 
-    4. An SDHC driver is enabled in this configuration but does not yet work.
+    4. Support for NSH built-in applications is enabled, but no built-in
+       applications have been configured in.
+
+    5. An SDHC driver is enabled in this configuration but does not yet work.
        The basic problem seems to be that it does not sense the presence of
        the SD card on PTE6.  No interrupts are generated when the SD card is
        inserted or removed.  You might want to disable SDHC and MMC/SD if

configs/freedom-k64f/netnsh/defconfig

@@ -603,6 +603,7 @@ CONFIG_UART3_2STOP=0
 # CONFIG_UART3_IFLOWCONTROL is not set
 # CONFIG_UART3_OFLOWCONTROL is not set
 # CONFIG_UART3_DMA is not set
+# CONFIG_PSEUDOTERM is not set
 # CONFIG_USBDEV is not set
 # CONFIG_USBHOST is not set
 # CONFIG_HAVE_USBTRACE is not set
@@ -772,6 +773,7 @@ CONFIG_FS_FAT=y
 # CONFIG_FS_ROMFS is not set
 # CONFIG_FS_TMPFS is not set
 # CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_BINFS is not set
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_REGISTER=y
 
@@ -813,7 +815,7 @@ CONFIG_MM_REGIONS=1
 # CONFIG_BINFMT_EXEPATH is not set
 # CONFIG_NXFLAT is not set
 # CONFIG_ELF is not set
-# CONFIG_BUILTIN is not set
+CONFIG_BUILTIN=y
 # CONFIG_PIC is not set
 # CONFIG_SYMTAB_ORDEREDBYNAME is not set
 
@@ -883,6 +885,11 @@ CONFIG_NETDB_DNSSERVER_IPv4ADDR=0x0a000001
 # Application Configuration
 #
 
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
 #
 # CAN Utilities
 #
@@ -922,7 +929,6 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_OSTEST is not set
 # CONFIG_EXAMPLES_PCA9635 is not set
 # CONFIG_EXAMPLES_PIPE is not set
-# CONFIG_EXAMPLES_POLL is not set
 # CONFIG_EXAMPLES_POSIXSPAWN is not set
 # CONFIG_EXAMPLES_PPPD is not set
 # CONFIG_EXAMPLES_RGBLED is not set
@@ -933,6 +939,7 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_SERLOOP is not set
 # CONFIG_EXAMPLES_SLCD is not set
 # CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_SMART_TEST is not set
 # CONFIG_EXAMPLES_SMP is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
@@ -944,7 +951,6 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_USBTERM is not set
 # CONFIG_EXAMPLES_WATCHDOG is not set
 # CONFIG_EXAMPLES_WEBSERVER is not set
-# CONFIG_EXAMPLES_WGET is not set
 
 #
 # File System Utilities
@@ -1016,6 +1022,7 @@ CONFIG_NSH_MAXARGUMENTS=6
 CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_NESTDEPTH=3
 # CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_BUILTIN_APPS=y
 
 #
 # Disable Individual commands

configs/freedom-k64f/nsh/defconfig

@@ -572,6 +572,7 @@ CONFIG_UART3_2STOP=0
 # CONFIG_UART3_IFLOWCONTROL is not set
 # CONFIG_UART3_OFLOWCONTROL is not set
 # CONFIG_UART3_DMA is not set
+# CONFIG_PSEUDOTERM is not set
 # CONFIG_USBDEV is not set
 # CONFIG_USBHOST is not set
 # CONFIG_HAVE_USBTRACE is not set
@@ -630,6 +631,7 @@ CONFIG_FAT_MAXFNAME=32
 # CONFIG_FS_ROMFS is not set
 # CONFIG_FS_TMPFS is not set
 # CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_BINFS is not set
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_REGISTER=y
 
@@ -670,7 +672,7 @@ CONFIG_MM_REGIONS=1
 # CONFIG_BINFMT_EXEPATH is not set
 # CONFIG_NXFLAT is not set
 # CONFIG_ELF is not set
-# CONFIG_BUILTIN is not set
+CONFIG_BUILTIN=y
 # CONFIG_PIC is not set
 # CONFIG_SYMTAB_ORDEREDBYNAME is not set
 
@@ -731,6 +733,11 @@ CONFIG_ARCH_HAVE_TLS=y
 # Application Configuration
 #
 
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
 #
 # CAN Utilities
 #
@@ -768,7 +775,6 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_OSTEST is not set
 # CONFIG_EXAMPLES_PCA9635 is not set
 # CONFIG_EXAMPLES_PIPE is not set
-# CONFIG_EXAMPLES_POLL is not set
 # CONFIG_EXAMPLES_POSIXSPAWN is not set
 # CONFIG_EXAMPLES_PPPD is not set
 # CONFIG_EXAMPLES_RGBLED is not set
@@ -779,6 +785,7 @@ CONFIG_EXAMPLES_NSH=y
 # CONFIG_EXAMPLES_SERLOOP is not set
 # CONFIG_EXAMPLES_SLCD is not set
 # CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_SMART_TEST is not set
 # CONFIG_EXAMPLES_SMP is not set
 # CONFIG_EXAMPLES_TCPECHO is not set
 # CONFIG_EXAMPLES_TELNETD is not set
@@ -846,6 +853,7 @@ CONFIG_NSH_MAXARGUMENTS=6
 CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_NESTDEPTH=3
 # CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_BUILTIN_APPS=y
 
 #
 # Disable Individual commands