mirror of
https://github.com/apache/nuttx.git
synced 2026-05-24 07:46:16 +08:00
Add LPCXpression USB storage example
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3509 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
@@ -125,6 +125,17 @@ SD Slot
|
||||
|
||||
*J55 must be set to provide chip select PIO1_11 signal as the SD slot
|
||||
chip select.
|
||||
|
||||
Base-board J4/J6 LPC1768
|
||||
Signal Pin Pin
|
||||
------------------- ----- --------
|
||||
PIO0_6-USB_CONNECT* 23 P0.21
|
||||
USB_DM 36 USB_D-
|
||||
USB_DP 37 USB_D+
|
||||
PIO0_3-VBUS_SENSE 39 P0.5
|
||||
|
||||
*J14 must be set to permit GPIO control of the USB connect pin
|
||||
J23 is associated the LEDs used for USB support
|
||||
|
||||
Development Environment
|
||||
^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
@@ -688,7 +688,6 @@ CONFIG_EXAMPLE_UIP_DHCPC=n
|
||||
#
|
||||
# Settings for examples/nettest
|
||||
#
|
||||
#
|
||||
# CONFIG_EXAMPLE_NETTEST_SERVER - The target board can act
|
||||
# as either the client side or server side of the test
|
||||
# CONFIG_EXAMPLE_NETTEST_PERFORMANCE - If set, then the
|
||||
|
||||
@@ -81,9 +81,9 @@
|
||||
* P0[30]/USB_D- J6-36 USB_D-
|
||||
*/
|
||||
|
||||
#define GPIO_I2C1_EPROM_SDA GPIO_I2C1_SDA_1
|
||||
#define GPIO_I2C1_EPROM_SDL GPIO_I2C1_SCL_2
|
||||
#define GPIO_LED (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN22)
|
||||
#define LPCXPRESSO_I2C1_EPROM_SDA GPIO_I2C1_SDA_1
|
||||
#define LPCXPRESSO_I2C1_EPROM_SDL GPIO_I2C1_SCL_2
|
||||
#define LPCXPRESSO_LED (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN22)
|
||||
|
||||
/* P1[0]/ENET-TXD0 J6-34? TXD0 TX-(Ethernet PHY)
|
||||
* P1[1]/ENET_TXD1 J6-35? TXD1 TX+(Ethernet PHY)
|
||||
@@ -126,7 +126,7 @@
|
||||
* P2[13]/EINT3/I2STX_SDA J6-27
|
||||
*/
|
||||
|
||||
#define GPIO_USB_PULLUP (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT2 | GPIO_PIN9)
|
||||
#define LPCXPRESSO_USB_PULLUP (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT2 | GPIO_PIN9)
|
||||
|
||||
/* P3[25]/MAT0.0/PWM1.2 PAD13 N/A
|
||||
* P3[26]/STCLK/MAT0.1/PWM1.3 PAD14 N/A
|
||||
@@ -140,18 +140,34 @@
|
||||
* Base-board J4/J6 LPC1768
|
||||
* SD Signal Pin Pin
|
||||
* --- ----------- ----- --------
|
||||
* CS PIO1_11* 55 P2.2 (See GPIO_SD_CS)
|
||||
* CS PIO1_11* 55 P2.2 (See LPCXPRESSO_SD_CS)
|
||||
* DIN PIO0_9-MOSI 5 P0.9 MOSI1 (See GPIO_SSP1_MOSI in lpc17_internal.h)
|
||||
* DOUT PIO0_8-MISO 6 P0.8 MISO1 (See GPIO_SSP1_MISO in lpc17_internal.h)
|
||||
* CLK PIO2_11-SCK 7 P0.9 SCK1 (See GPIO_SSP1_SCK in board.h)
|
||||
* CD PIO2_10 52 P2.11 (See GPIO_SD_CD)
|
||||
* CD PIO2_10 52 P2.11 (See LPCXPRESSO_SD_CD)
|
||||
*/
|
||||
|
||||
#define GPIO_SD_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT2 | GPIO_PIN2)
|
||||
#define LPCXPRESSO_SD_CS (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT2 | GPIO_PIN2)
|
||||
#ifdef CONFIG_GPIO_IRQ
|
||||
# define GPIO_SD_CD (GPIO_INTBOTH | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN11)
|
||||
# define LPCXPRESSO_SD_CD (GPIO_INTBOTH | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN11)
|
||||
#else
|
||||
# define GPIO_SD_CD (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN11)
|
||||
# define LPCXPRESSO_SD_CD (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT2 | GPIO_PIN11)
|
||||
#endif
|
||||
|
||||
/* Base-board J4/J6 LPC1768
|
||||
* Signal Pin Pin
|
||||
* ------------------- ----- --------
|
||||
* PIO0_6-USB_CONNECT* 23 P0.21
|
||||
* USB_DM 36 USB_D-
|
||||
* USB_DP 37 USB_D+
|
||||
* PIO0_3-VBUS_SENSE 39 P0.5
|
||||
*/
|
||||
|
||||
#define LPCXPRESSO_USB_CONNECT (GPIO_OUTPUT | GPIO_VALUE_ONE | GPIO_PORT0 | GPIO_PIN21)
|
||||
#ifdef CONFIG_GPIO_IRQ
|
||||
# define LPCXPRESSO_USB_VBUSSENSE (GPIO_INTBOTH | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN5)
|
||||
#else
|
||||
# define LPCXPRESSO_USB_VBUSSENSE (GPIO_INPUT | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN5)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
|
||||
@@ -97,7 +97,7 @@ void up_ledinit(void)
|
||||
{
|
||||
/* Configure all LED GPIO lines */
|
||||
|
||||
lpc17_configgpio(GPIO_LED);
|
||||
lpc17_configgpio(LPCXPRESSO_LED);
|
||||
g_ncstate = true;
|
||||
}
|
||||
|
||||
@@ -125,7 +125,7 @@ void up_ledon(int led)
|
||||
return;
|
||||
}
|
||||
|
||||
lpc17_gpiowrite(GPIO_LED, off);
|
||||
lpc17_gpiowrite(LPCXPRESSO_LED, off);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
@@ -151,7 +151,7 @@ void up_ledoff(int led)
|
||||
return;
|
||||
}
|
||||
|
||||
lpc17_gpiowrite(GPIO_LED, off);
|
||||
lpc17_gpiowrite(LPCXPRESSO_LED, off);
|
||||
}
|
||||
|
||||
#endif /* CONFIG_ARCH_LEDS */
|
||||
|
||||
@@ -113,8 +113,8 @@ void weak_function lpc17_sspinitialize(void)
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_LPC17_SSP1
|
||||
(void)lpc17_configgpio(GPIO_SD_CS);
|
||||
(void)lpc17_configgpio(GPIO_SD_CD);
|
||||
(void)lpc17_configgpio(LPCXPRESSO_SD_CS);
|
||||
(void)lpc17_configgpio(LPCXPRESSO_SD_CD);
|
||||
#endif
|
||||
|
||||
ssp_dumpgpio("lpc17_sspinitialize() Exit");
|
||||
@@ -173,7 +173,7 @@ void lpc17_ssp1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool sel
|
||||
{
|
||||
/* Assert/de-assert the CS pin to the card */
|
||||
|
||||
(void)lpc17_gpiowrite(GPIO_SD_CS, !selected);
|
||||
(void)lpc17_gpiowrite(LPCXPRESSO_SD_CS, !selected);
|
||||
}
|
||||
|
||||
ssp_dumpgpio("lpc17_spi1select() Exit");
|
||||
@@ -185,7 +185,7 @@ uint8_t lpc17_ssp1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
/* Read the state of the card-detect bit */
|
||||
|
||||
if (lpc17_gpioread(GPIO_SD_CD) == 0)
|
||||
if (lpc17_gpioread(LPCXPRESSO_SD_CD) == 0)
|
||||
{
|
||||
sspdbg("Returning SPI_STATUS_PRESENT\n");
|
||||
return SPI_STATUS_PRESENT;
|
||||
|
||||
+174
@@ -0,0 +1,174 @@
|
||||
############################################################################
|
||||
# configs/lpcxpresso-lpc1768/usbstorage/Make.defs
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
|
||||
# Setup for the selected toolchain
|
||||
|
||||
ifeq ($(CONFIG_LPC17_CODESOURCERYW),y)
|
||||
# CodeSourcery under Windows
|
||||
CROSSDEV = arm-none-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_LPC17_CODESOURCERYL),y)
|
||||
# CodeSourcery under Linux
|
||||
CROSSDEV = arm-none-eabi-
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
MAXOPTIMIZATION = -O2
|
||||
endif
|
||||
ifeq ($(CONFIG_LPC17_DEVKITARM),y)
|
||||
# devkitARM under Windows
|
||||
CROSSDEV = arm-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
|
||||
# NuttX buildroot under Linux or Cygwin
|
||||
CROSSDEV = arm-elf-
|
||||
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
|
||||
MAXOPTIMIZATION = -Os
|
||||
endif
|
||||
ifeq ($(CONFIG_LPC17_CODEREDW),y)
|
||||
# CodeSourcery under Windows
|
||||
CROSSDEV = arm-none-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft -D__NEWLIB__
|
||||
endif
|
||||
ifeq ($(CONFIG_LPC17_CODEREDL),y)
|
||||
# CodeSourcery under Linux
|
||||
CROSSDEV = arm-none-eabi-
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft -D__NEWLIB__
|
||||
MAXOPTIMIZATION = -O2
|
||||
endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/ld.script}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/ld.script
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
define PREPROCESS
|
||||
@echo "CPP: $1->$2"
|
||||
@$(CPP) $(CPPFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define COMPILE
|
||||
@echo "CC: $1"
|
||||
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define COMPILEXX
|
||||
@echo "CXX: $1"
|
||||
@$(CXX) -c $(CXXFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ASSEMBLE
|
||||
@echo "AS: $1"
|
||||
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ARCHIVE
|
||||
echo "AR: $2"; \
|
||||
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||
endef
|
||||
|
||||
define CLEAN
|
||||
@rm -f *.o *.a
|
||||
endef
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
@@ -0,0 +1,39 @@
|
||||
############################################################################
|
||||
# configs/lpcxpresso-lpc1768/usbstorage/appconfig
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
# Path to example in apps/examples containing the user_start entry point
|
||||
|
||||
CONFIGURED_APPS += examples/usbstorage
|
||||
|
||||
+892
File diff suppressed because it is too large
Load Diff
+110
@@ -0,0 +1,110 @@
|
||||
/****************************************************************************
|
||||
* configs/lpcxpresso-lpc1768/usbstorage/ld.script
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The LPC1768 has 512Kb of FLASH beginning at address 0x0000:0000 and
|
||||
* 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address
|
||||
* 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses
|
||||
* 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit
|
||||
* into the 32Kb CPU SRAM address range.
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K
|
||||
sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > flash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} >sram
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
+59
@@ -0,0 +1,59 @@
|
||||
#!/bin/bash
|
||||
# configs/lpcxpresso-lpc1768/usbstorage/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$(basename $0)" = "setenv.sh" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
|
||||
|
||||
WD=`pwd`
|
||||
|
||||
# This is where the buildroot might reside on a Linux or Cygwin system
|
||||
# export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# This is the default install location for Code Red on Linux
|
||||
export TOOLCHAIN_BIN="/usr/local/LPCXpresso/tools/bin"
|
||||
|
||||
# This the Cygwin path to the LPCXpresso 3.6 install location under Windows
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/nxp/lpcxpresso_3.6/Tools/bin"
|
||||
|
||||
# This is the path to the LPCXpression tool subdirectory
|
||||
export LPCTOOL_DIR="${WD}/configs/lpcxpresso-lpc1768/tools"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
@@ -64,7 +64,7 @@
|
||||
# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
|
||||
# cause a 100 second delay during boot-up. This 100 second delay
|
||||
# serves no purpose other than it allows you to calibrate
|
||||
# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
|
||||
# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
|
||||
# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
|
||||
# the delay actually is 100 seconds.
|
||||
# CONFIG_ARCH_DMA - Support DMA initialization
|
||||
|
||||
Reference in New Issue
Block a user