mirror of
https://github.com/apache/nuttx.git
synced 2026-06-06 08:36:24 +08:00
first attempt at a nucleo-l432kc board
This commit is contained in:
Sebastien Lorquet
@@ -0,0 +1,21 @@
|
||||
#
|
||||
# For a description of the syntax of this configuration file,
|
||||
# see the file kconfig-language.txt in the NuttX tools repository.
|
||||
#
|
||||
|
||||
if ARCH_BOARD_NUCLEO_L432KC
|
||||
|
||||
config NUCLEO_L432KC_AJOY_MINBUTTONS
|
||||
bool "Minimal Joystick Buttons"
|
||||
default n if !STM32_USART1
|
||||
default y if STM32_USART1
|
||||
depends on AJOYSTICK
|
||||
---help---
|
||||
The Itead Joystick shield supports analog X/Y position and up to 5
|
||||
buttons. Some of these buttons may conflict with other resources
|
||||
(Button F, for example, conflicts with the default USART1 pin usage).
|
||||
Selecting this option will return the number of buttons to the
|
||||
minimal set: SELECT (joystick down), FIRE (BUTTON B), and JUMP
|
||||
(BUTTON A).
|
||||
|
||||
endif # ARCH_BOARD_NUCLEO_L432KC
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,271 @@
|
||||
/************************************************************************************
|
||||
* configs/nucleo-l432kc/include/board.h
|
||||
*
|
||||
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __CONFIGS_NUCLEO_L432KC_INCLUDE_BOARD_H
|
||||
#define __CONFIGS_NUCLEO_L432KC_INCLUDE_BOARD_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#ifndef __ASSEMBLY__
|
||||
# include <stdint.h>
|
||||
#endif
|
||||
|
||||
#include <stm32l4.h>
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Clocking *************************************************************************/
|
||||
|
||||
#if defined(CONFIG_ARCH_CHIP_STM32L432KC)
|
||||
# include <arch/board/nucleo-l432kc.h>
|
||||
#endif
|
||||
|
||||
/* DMA Channel/Stream Selections ****************************************************/
|
||||
/* Stream selections are arbitrary for now but might become important in the future
|
||||
* is we set aside more DMA channels/streams.
|
||||
*/
|
||||
|
||||
/* Values defined in arch/arm/src/stm32l4/chip/stm32l4x6xx_dma.h */
|
||||
|
||||
#define DMACHAN_SDMMC DMACHAN_SDMMC_1 /* 2 choices */
|
||||
|
||||
#define DMACHAN_SPI1_RX DMACHAN_SPI1_RX_1 /* 2 choices */
|
||||
#define DMACHAN_SPI1_TX DMACHAN_SPI1_TX_1 /* 2 choices */
|
||||
|
||||
/* UART RX DMA configurations */
|
||||
|
||||
#define DMACHAN_USART1_RX DMACHAN_USART1_RX_2
|
||||
|
||||
/* Alternate function pin selections ************************************************/
|
||||
|
||||
/* USART1:
|
||||
* RXD: PA10 CN9 pin 3, CN10 pin 33
|
||||
* PB7 CN7 pin 21
|
||||
* TXD: PA9 CN5 pin 1, CN10 pin 21
|
||||
* PB6 CN5 pin 3, CN10 pin 17
|
||||
*/
|
||||
|
||||
#if 1
|
||||
# define GPIO_USART1_RX GPIO_USART1_RX_1 /* PA10 */
|
||||
# define GPIO_USART1_TX GPIO_USART1_TX_1 /* PA9 */
|
||||
#else
|
||||
# define GPIO_USART1_RX GPIO_USART1_RX_2 /* PB7 */
|
||||
# define GPIO_USART1_TX GPIO_USART1_TX_2 /* PB6 */
|
||||
#endif
|
||||
|
||||
/* USART2: Connected to STLInk Debug via PA2, PA3
|
||||
* RXD: PA3 CN9 pin 1 (See SB13, 14, 62, 63). CN10 pin 37
|
||||
* PD6
|
||||
* TXD: PA2 CN9 pin 2 (See SB13, 14, 62, 63). CN10 pin 35
|
||||
* PD5
|
||||
*/
|
||||
|
||||
#define GPIO_USART2_RX GPIO_USART2_RX_1 /* PA3 */
|
||||
#define GPIO_USART2_TX GPIO_USART2_TX_1 /* PA2 */
|
||||
#define GPIO_USART2_RTS GPIO_USART2_RTS_2
|
||||
#define GPIO_USART2_CTS GPIO_USART2_CTS_2
|
||||
|
||||
#define GPIO_UART4_RX GPIO_UART4_RX_1 /* PA1 */
|
||||
#define GPIO_UART4_TX GPIO_UART4_TX_1 /* PA0 */
|
||||
|
||||
/* I2C
|
||||
*
|
||||
* The optional _GPIO configurations allow the I2C driver to manually
|
||||
* reset the bus to clear stuck slaves. They match the pin configuration,
|
||||
* but are normally-high GPIOs.
|
||||
*/
|
||||
|
||||
#define GPIO_I2C1_SCL \
|
||||
(GPIO_I2C1_SCL_2 | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET)
|
||||
#define GPIO_I2C1_SDA \
|
||||
(GPIO_I2C1_SDA_2 | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET)
|
||||
#define GPIO_I2C1_SCL_GPIO \
|
||||
(GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | \
|
||||
GPIO_PORTB | GPIO_PIN8)
|
||||
#define GPIO_I2C1_SDA_GPIO \
|
||||
(GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | \
|
||||
GPIO_PORTB | GPIO_PIN9)
|
||||
|
||||
#define GPIO_I2C2_SCL \
|
||||
(GPIO_I2C2_SCL_1 | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET)
|
||||
#define GPIO_I2C2_SDA \
|
||||
(GPIO_I2C2_SDA_1 | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET)
|
||||
#define GPIO_I2C2_SCL_GPIO \
|
||||
(GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | \
|
||||
GPIO_PORTB | GPIO_PIN10)
|
||||
#define GPIO_I2C2_SDA_GPIO \
|
||||
(GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | \
|
||||
GPIO_PORTB | GPIO_PIN11)
|
||||
|
||||
/* SPI */
|
||||
|
||||
/* SPI1 is available on the arduino protocol at positions D11/12/13 */
|
||||
|
||||
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1 /*PA6*/
|
||||
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1 /*PA7*/
|
||||
#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1 /*PA5*/
|
||||
|
||||
#define GPIO_SPI2_MISO GPIO_SPI2_MISO_1 /*PB14*/
|
||||
#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_1 /*PB15*/
|
||||
#define GPIO_SPI2_SCK GPIO_SPI2_SCK_2 /*PB13*/
|
||||
|
||||
/* LEDs
|
||||
*
|
||||
* The Nucleo l476RG board provides a single user LED, LD2. LD2
|
||||
* is the green LED connected to Arduino signal D13 corresponding to MCU I/O
|
||||
* PA5 (pin 21) or PB13 (pin 34) depending on the STM32 target.
|
||||
*
|
||||
* - When the I/O is HIGH value, the LED is on.
|
||||
* - When the I/O is LOW, the LED is off.
|
||||
*/
|
||||
|
||||
/* LED index values for use with board_userled() */
|
||||
|
||||
#define BOARD_LD2 0
|
||||
#define BOARD_NLEDS 1
|
||||
|
||||
/* LED bits for use with board_userled_all() */
|
||||
|
||||
#define BOARD_LD2_BIT (1 << BOARD_LD2)
|
||||
|
||||
/* These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
|
||||
* defined. In that case, the usage by the board port is defined in
|
||||
* include/board.h and src/sam_leds.c. The LEDs are used to encode OS-related
|
||||
* events as follows when the red LED (PE24) is available:
|
||||
*
|
||||
* SYMBOL Meaning LD2
|
||||
* ------------------- ----------------------- -----------
|
||||
* LED_STARTED NuttX has been started OFF
|
||||
* LED_HEAPALLOCATE Heap has been allocated OFF
|
||||
* LED_IRQSENABLED Interrupts enabled OFF
|
||||
* LED_STACKCREATED Idle stack created ON
|
||||
* LED_INIRQ In an interrupt No change
|
||||
* LED_SIGNAL In a signal handler No change
|
||||
* LED_ASSERTION An assertion failed No change
|
||||
* LED_PANIC The system has crashed Blinking
|
||||
* LED_IDLE MCU is is sleep mode Not used
|
||||
*
|
||||
* Thus if LD2, NuttX has successfully booted and is, apparently, running
|
||||
* normally. If LD2 is flashing at approximately 2Hz, then a fatal error
|
||||
* has been detected and the system has halted.
|
||||
*/
|
||||
|
||||
#define LED_STARTED 0
|
||||
#define LED_HEAPALLOCATE 0
|
||||
#define LED_IRQSENABLED 0
|
||||
#define LED_STACKCREATED 1
|
||||
#define LED_INIRQ 1
|
||||
#define LED_SIGNAL 2
|
||||
#define LED_ASSERTION 2
|
||||
#define LED_PANIC 1
|
||||
|
||||
/* Buttons
|
||||
*
|
||||
* B1 USER: the user button is connected to the I/O PC13 (pin 2) of the STM32
|
||||
* microcontroller.
|
||||
*/
|
||||
|
||||
#define BUTTON_USER 0
|
||||
#define NUM_BUTTONS 1
|
||||
|
||||
#define BUTTON_USER_BIT (1 << BUTTON_USER)
|
||||
|
||||
/* Quadrature encoder
|
||||
* Default is to use timer 5 (32-bit) and encoder on PA0/PA1
|
||||
*/
|
||||
|
||||
#define GPIO_TIM2_CH1IN GPIO_TIM2_CH1IN_1
|
||||
#define GPIO_TIM2_CH2IN GPIO_TIM2_CH2IN_1
|
||||
|
||||
#define GPIO_TIM3_CH1IN GPIO_TIM3_CH1IN_3
|
||||
#define GPIO_TIM3_CH2IN GPIO_TIM3_CH2IN_3
|
||||
|
||||
#define GPIO_TIM5_CH1IN GPIO_TIM5_CH1IN_1
|
||||
#define GPIO_TIM5_CH2IN GPIO_TIM5_CH2IN_1
|
||||
|
||||
/* PWM output for full bridge, uses config 1, because port E is N/A on QFP64
|
||||
* CH1 | 1(A8) 2(E9)
|
||||
* CH2 | 1(A9) 2(E11)
|
||||
* CHN1 | 1(A7) 2(B13) 3(E8)
|
||||
* CHN2 | 1(B0) 2(B14) 3(E10)
|
||||
*/
|
||||
|
||||
#define GPIO_TIM1_CH1OUT GPIO_TIM1_CH1OUT_1
|
||||
#define GPIO_TIM1_CH1NOUT GPIO_TIM1_CH1N_1
|
||||
#define GPIO_TIM1_CH2OUT GPIO_TIM1_CH2OUT_1
|
||||
#define GPIO_TIM1_CH2NOUT GPIO_TIM1_CH2N_1
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
#define EXTERN extern "C"
|
||||
extern "C"
|
||||
{
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************/
|
||||
/************************************************************************************
|
||||
* Name: stm32l4_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32L4 architectures must provide the following entry point. This entry point
|
||||
* is called early in the initialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32l4_boardinitialize(void);
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIGS_NUCLEO_F476RG_INCLUDE_BOARD_H */
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,112 @@
|
||||
############################################################################
|
||||
# configs/nucleo-l432kc/nsh/Make.defs
|
||||
#
|
||||
# Copyright (C) 2014 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
LDSCRIPT = l432kc.ld
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(ARCROSSDEV)ar rcs
|
||||
NM = $(ARCROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
||||
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -fno-rtti
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
|
||||
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
ASMEXT = .S
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,119 @@
|
||||
/****************************************************************************
|
||||
* configs/nucleo-l432kc/scripts/l432kc.ld
|
||||
*
|
||||
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
* Sebastien Lorquet <sebastien@lorquet.fr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The STM32F411RE has 512Kb of FLASH beginning at address 0x0800:0000 and
|
||||
* 128Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH,
|
||||
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
|
||||
* begin execution by jumping to the entry point in the 0x0800:0000 address
|
||||
* range.
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K
|
||||
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 96K
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
*(.init_array .init_array.*)
|
||||
_einit = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > flash
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > flash
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
/* The STM32L432KC has 96Kb of SRAM beginning at the following address */
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > flash
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
@@ -0,0 +1,71 @@
|
||||
############################################################################
|
||||
# configs/nucleo-l432kc/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2014 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
ASRCS =
|
||||
CSRCS = stm32_boot.c stm32_spi.c
|
||||
|
||||
ifeq ($(CONFIG_ARCH_LEDS),y)
|
||||
CSRCS += stm32_autoleds.c
|
||||
else
|
||||
CSRCS += stm32_userleds.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_ARCH_BUTTONS),y)
|
||||
CSRCS += stm32_buttons.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_ADC),y)
|
||||
CSRCS += stm32_adc.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_QENCODER),y)
|
||||
CSRCS += stm32_qencoder.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_PWM),y)
|
||||
CSRCS += stm32_pwm.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_TIMER),y)
|
||||
CSRCS += stm32_timer.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_LIB_BOARDCTL),y)
|
||||
CSRCS += stm32_appinit.c
|
||||
endif
|
||||
|
||||
include $(TOPDIR)/configs/Board.mk
|
||||
@@ -0,0 +1,390 @@
|
||||
/************************************************************************************
|
||||
* configs/nucleo-l432kc/src/nucleo-l432kc.h
|
||||
*
|
||||
* Copyright (C) 2014, 2016 Gregory Nutt. All rights reserved.
|
||||
* Authors: Frank Bennett
|
||||
* Gregory Nutt <gnutt@nuttx.org>
|
||||
* Sebastien Lorquet <sebastien@lorquet.fr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __CONFIGS_NUCLEO_L432KC_SRC_NUCLEO_L432KC_H
|
||||
#define __CONFIGS_NUCLEO_L432KC_SRC_NUCLEO_L432KC_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
/* Configuration ********************************************************************/
|
||||
|
||||
#define HAVE_PROC 1
|
||||
#define HAVE_RTC_DRIVER 1
|
||||
#define HAVE_MMCSD 1
|
||||
|
||||
#if !defined(CONFIG_FS_PROCFS)
|
||||
# undef HAVE_PROC
|
||||
#endif
|
||||
|
||||
#if defined(HAVE_PROC) && defined(CONFIG_DISABLE_MOUNTPOINT)
|
||||
# warning Mountpoints disabled. No procfs support
|
||||
# undef HAVE_PROC
|
||||
#endif
|
||||
|
||||
/* Check if we can support the RTC driver */
|
||||
|
||||
#if !defined(CONFIG_RTC) || !defined(CONFIG_RTC_DRIVER)
|
||||
# undef HAVE_RTC_DRIVER
|
||||
#endif
|
||||
|
||||
#if !defined(CONFIG_STM32L4_SDIO) || !defined(CONFIG_MMCSD) || \
|
||||
!defined(CONFIG_MMCSD_SDIO)
|
||||
# undef HAVE_MMCSD
|
||||
#endif
|
||||
|
||||
/* LED. User LD2: the green LED is a user LED connected to Arduino signal D13
|
||||
* corresponding to MCU I/O PA5 (pin 21) or PB13 (pin 34) depending on the STM32
|
||||
* target.
|
||||
*
|
||||
* - When the I/O is HIGH value, the LED is on.
|
||||
* - When the I/O is LOW, the LED is off.
|
||||
*/
|
||||
|
||||
#define GPIO_LD2 \
|
||||
(GPIO_PORTA | GPIO_PIN5 | GPIO_OUTPUT_CLEAR | GPIO_OUTPUT | GPIO_PULLUP | \
|
||||
GPIO_SPEED_50MHz)
|
||||
|
||||
/* Buttons
|
||||
*
|
||||
* B1 USER: the user button is connected to the I/O PC13 (pin 2) of the STM32
|
||||
* microcontroller.
|
||||
*/
|
||||
|
||||
#define MIN_IRQBUTTON BUTTON_USER
|
||||
#define MAX_IRQBUTTON BUTTON_USER
|
||||
#define NUM_IRQBUTTONS 1
|
||||
|
||||
#define GPIO_BTN_USER \
|
||||
(GPIO_INPUT |GPIO_FLOAT |GPIO_EXTI | GPIO_PORTC | GPIO_PIN13)
|
||||
|
||||
/* The shield uses the following pins:
|
||||
*
|
||||
* +5V
|
||||
* GND
|
||||
* SERIAL_TX=PA_2 USER_BUTTON=PC_13
|
||||
* SERIAL_RX=PA_3 LD2=PA_5
|
||||
*
|
||||
* Analog Digital
|
||||
* A0=PA_0 USART2RX D0=PA_3 D8 =PA_9
|
||||
* A1=PA_1 USART2TX D1=PA_2 D9 =PC_7
|
||||
* A2=PA_4 D2=PA_10 WIFI_CS=D10=PB_6 SPI_CS
|
||||
* A3=PB_0 WIFI_INT=D3=PB_3 D11=PA_7 SPI_MOSI
|
||||
* A4=PC_1 SD_CS=D4=PB_5 D12=PA_6 SPI_MISO
|
||||
* A5=PC_0 WIFI_EN=D5=PB_4 LD2=D13=PA_5 SPI_SCK
|
||||
* LED2=D6=PB_10 I2C1_SDA=D14=PB_9 WIFI Probe
|
||||
* D7=PA_8 I2C1_SCL=D15=PB_8 WIFI Probe
|
||||
*
|
||||
* mostly from: https://mbed.org/platforms/ST-Nucleo-F401RE/
|
||||
*
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_WL_CC3000
|
||||
# define GPIO_WIFI_INT (GPIO_PORTB | GPIO_PIN3 | GPIO_INPUT | \
|
||||
GPIO_PULLUP | GPIO_EXTI)
|
||||
# define GPIO_WIFI_EN (GPIO_PORTB | GPIO_PIN4 | GPIO_OUTPUT_CLEAR | \
|
||||
GPIO_OUTPUT | GPIO_PULLUP | GPIO_SPEED_50MHz)
|
||||
# define GPIO_WIFI_CS (GPIO_PORTB | GPIO_PIN6 | GPIO_OUTPUT_SET | \
|
||||
GPIO_OUTPUT | GPIO_PULLUP | GPIO_SPEED_50MHz)
|
||||
# define GPIO_D14 (GPIO_PORTB | GPIO_PIN9 | GPIO_OUTPUT_CLEAR | \
|
||||
GPIO_OUTPUT | GPIO_PULLUP | GPIO_SPEED_50MHz)
|
||||
# define GPIO_D15 (GPIO_PORTB | GPIO_PIN8 | GPIO_OUTPUT_CLEAR | \
|
||||
GPIO_OUTPUT | GPIO_PULLUP | GPIO_SPEED_50MHz)
|
||||
# define GPIO_D0 (GPIO_PORTA | GPIO_PIN3 | GPIO_INPUT | \
|
||||
GPIO_PULLUP)
|
||||
# define GPIO_D1 (GPIO_PORTA | GPIO_PIN2 | GPIO_OUTPUT_CLEAR | \
|
||||
GPIO_PULLUP)
|
||||
# define GPIO_D2 (GPIO_PORTA | GPIO_PIN10 | GPIO_OUTPUT_CLEAR | \
|
||||
GPIO_OUTPUT | GPIO_PULLUP | GPIO_SPEED_50MHz)
|
||||
# define GPIO_A0 (GPIO_PORTA | GPIO_PIN0 | GPIO_OUTPUT_SET | \
|
||||
GPIO_OUTPUT | GPIO_PULLUP | GPIO_SPEED_50MHz)
|
||||
# define GPIO_A1 (GPIO_PORTA | GPIO_PIN1 | GPIO_OUTPUT_SET | \
|
||||
GPIO_OUTPUT | GPIO_PULLUP | GPIO_SPEED_50MHz)
|
||||
# define GPIO_A2 (GPIO_PORTA | GPIO_PIN4 | GPIO_INPUT | \
|
||||
GPIO_PULLUP)
|
||||
# define GPIO_A3 (GPIO_PORTB | GPIO_PIN0 | GPIO_INPUT | \
|
||||
GPIO_PULLUP)
|
||||
#endif
|
||||
|
||||
/* SPI1 off */
|
||||
|
||||
#define GPIO_SPI1_MOSI_OFF (GPIO_INPUT | GPIO_PULLDOWN | \
|
||||
GPIO_PORTA | GPIO_PIN7)
|
||||
#define GPIO_SPI1_MISO_OFF (GPIO_INPUT | GPIO_PULLDOWN | \
|
||||
GPIO_PORTA | GPIO_PIN6)
|
||||
#define GPIO_SPI1_SCK_OFF (GPIO_INPUT | GPIO_PULLDOWN | \
|
||||
GPIO_PORTA | GPIO_PIN5)
|
||||
|
||||
/* SPI1 chip selects off */
|
||||
|
||||
#ifdef CONFIG_WL_CC3000
|
||||
# define GPIO_SPI_CS_WIFI_OFF \
|
||||
(GPIO_INPUT | GPIO_PULLDOWN | GPIO_SPEED_2MHz | \
|
||||
GPIO_PORTB | GPIO_PIN6)
|
||||
#endif
|
||||
|
||||
#ifdef HAVE_MMCSD
|
||||
# define GPIO_SPI_CS_SD_CARD_OFF \
|
||||
(GPIO_INPUT | GPIO_PULLDOWN | GPIO_SPEED_2MHz | \
|
||||
GPIO_PORTB | GPIO_PIN5)
|
||||
#endif
|
||||
|
||||
/* SPI chip selects */
|
||||
|
||||
#ifdef CONFIG_WL_CC3000
|
||||
# define GPIO_SPI_CS_WIFI \
|
||||
(GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_2MHz | \
|
||||
GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN6)
|
||||
#endif
|
||||
|
||||
#ifdef HAVE_MMCSD
|
||||
# define GPIO_SPI_CS_SD_CARD \
|
||||
(GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_2MHz | \
|
||||
GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN5)
|
||||
#endif
|
||||
|
||||
/* Devices on the onboard bus.
|
||||
*
|
||||
* Note that these are unshifted addresses.
|
||||
*/
|
||||
|
||||
#define NUCLEO_I2C_OBDEV_LED 0x55
|
||||
#define NUCLEO_I2C_OBDEV_HMC5883 0x1e
|
||||
|
||||
/* User GPIOs
|
||||
*
|
||||
* GPIO0-1 are for probing WIFI status
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_WL_CC3000
|
||||
# define GPIO_GPIO0_INPUT \
|
||||
(GPIO_INPUT | GPIO_PULLUP | GPIO_PORTB | GPIO_PIN8)
|
||||
# define GPIO_GPIO1_INPUT \
|
||||
(GPIO_INPUT | GPIO_PULLUP | GPIO_PORTB | GPIO_PIN9)
|
||||
# define GPIO_GPIO0_OUTPUT \
|
||||
(GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_2MHz | \
|
||||
GPIO_OUTPUT_CLEAR | GPIO_PORTB | GPIO_PIN8)
|
||||
# define GPIO_GPIO1_OUTPUT \
|
||||
(GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_2MHz | \
|
||||
GPIO_OUTPUT_CLEAR | GPIO_PORTB | GPIO_PIN9)
|
||||
#endif
|
||||
|
||||
/* Itead Joystick Shield
|
||||
*
|
||||
* See http://imall.iteadstudio.com/im120417014.html for more information
|
||||
* about this joystick.
|
||||
*
|
||||
* --------- ----------------- ---------------------------------
|
||||
* ARDUINO ITEAD NUCLEO-F4x1
|
||||
* PIN NAME SIGNAL SIGNAL
|
||||
* --------- ----------------- ---------------------------------
|
||||
* D3 Button E Output PB3
|
||||
* D4 Button D Output PB5
|
||||
* D5 Button C Output PB4
|
||||
* D6 Button B Output PB10
|
||||
* D7 Button A Output PA8
|
||||
* D8 Button F Output PA9
|
||||
* D9 Button G Output PC7
|
||||
* A0 Joystick Y Output PA0 ADC1_0
|
||||
* A1 Joystick X Output PA1 ADC1_1
|
||||
* --------- ----------------- ---------------------------------
|
||||
*
|
||||
* All buttons are pulled on the shield. A sensed low value indicates
|
||||
* when the button is pressed.
|
||||
*
|
||||
* NOTE: Button F cannot be used with the default USART1 configuration
|
||||
* because PA9 is configured for USART1_RX by default. Use select
|
||||
* different USART1 pins in the board.h file or select a different
|
||||
* USART or select CONFIG_NUCLEO_L432KC_AJOY_MINBUTTONS which will
|
||||
* eliminate all but buttons A, B, and C.
|
||||
*/
|
||||
|
||||
#define ADC_XOUPUT 1 /* X output is on ADC channel 1 */
|
||||
#define ADC_YOUPUT 0 /* Y output is on ADC channel 0 */
|
||||
|
||||
#define GPIO_BUTTON_A \
|
||||
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTA | GPIO_PIN8)
|
||||
#define GPIO_BUTTON_B \
|
||||
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTB | GPIO_PIN10)
|
||||
#define GPIO_BUTTON_C \
|
||||
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTB | GPIO_PIN4)
|
||||
#define GPIO_BUTTON_D \
|
||||
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTB | GPIO_PIN5)
|
||||
#define GPIO_BUTTON_E \
|
||||
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTB | GPIO_PIN3)
|
||||
#define GPIO_BUTTON_F \
|
||||
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTA | GPIO_PIN9)
|
||||
#define GPIO_BUTTON_G \
|
||||
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTC | GPIO_PIN7)
|
||||
|
||||
/* Itead Joystick Signal interpretation:
|
||||
*
|
||||
* --------- ----------------------- ---------------------------
|
||||
* BUTTON TYPE NUTTX ALIAS
|
||||
* --------- ----------------------- ---------------------------
|
||||
* Button A Large button A JUMP/BUTTON 3
|
||||
* Button B Large button B FIRE/BUTTON 2
|
||||
* Button C Joystick select button SELECT/BUTTON 1
|
||||
* Button D Tiny Button D BUTTON 6
|
||||
* Button E Tiny Button E BUTTON 7
|
||||
* Button F Large Button F BUTTON 4
|
||||
* Button G Large Button G BUTTON 5
|
||||
* --------- ----------------------- ---------------------------
|
||||
*/
|
||||
|
||||
#define GPIO_BUTTON_1 GPIO_BUTTON_C
|
||||
#define GPIO_BUTTON_2 GPIO_BUTTON_B
|
||||
#define GPIO_BUTTON_3 GPIO_BUTTON_A
|
||||
#define GPIO_BUTTON_4 GPIO_BUTTON_F
|
||||
#define GPIO_BUTTON_5 GPIO_BUTTON_G
|
||||
#define GPIO_BUTTON_6 GPIO_BUTTON_D
|
||||
#define GPIO_BUTTON_7 GPIO_BUTTON_E
|
||||
|
||||
#define GPIO_SELECT GPIO_BUTTON_1
|
||||
#define GPIO_FIRE GPIO_BUTTON_2
|
||||
#define GPIO_JUMP GPIO_BUTTON_3
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
|
||||
/* Global driver instances */
|
||||
|
||||
#ifdef CONFIG_STM32L4_SPI1
|
||||
extern struct spi_dev_s *g_spi1;
|
||||
#endif
|
||||
#ifdef CONFIG_STM32L4_SPI2
|
||||
extern struct spi_dev_s *g_spi2;
|
||||
#endif
|
||||
#ifdef HAVE_MMCSD
|
||||
extern struct sdio_dev_s *g_sdio;
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32l4_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32l4_spiinitialize(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32l4_usbinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to setup USB-related GPIO pins.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32l4_usbinitialize(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32l4_pwm_setup
|
||||
*
|
||||
* Description:
|
||||
* Initialize PWM and register the PWM device.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_PWM
|
||||
int stm32l4_pwm_setup(void);
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32l4_adc_setup
|
||||
*
|
||||
* Description:
|
||||
* Initialize ADC and register the ADC driver.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ADC
|
||||
int stm32l4_adc_setup(void);
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_ajoy_initialize
|
||||
*
|
||||
* Description:
|
||||
* Initialize and register the button joystick driver
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_AJOYSTICK
|
||||
int board_ajoy_initialize(void);
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_timer_driver_initialize
|
||||
*
|
||||
* Description:
|
||||
* Initialize and register a timer
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_TIMER
|
||||
int board_timer_driver_initialize(FAR const char *devpath, int timer);
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32l4_qencoder_initialize
|
||||
*
|
||||
* Description:
|
||||
* Initialize and register a qencoder
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_QENCODER
|
||||
int stm32l4_qencoder_initialize(FAR const char *devpath, int timer);
|
||||
#endif
|
||||
|
||||
#endif /* __CONFIGS_NUCLEO_L432KC_SRC_NUCLEO_L432KC_H */
|
||||
@@ -0,0 +1,148 @@
|
||||
/************************************************************************************
|
||||
* configs/nucleo-l432kc/src/stm32_adc.c
|
||||
*
|
||||
* Copyright (C) 2014, 2016 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <errno.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/board.h>
|
||||
#include <nuttx/analog/adc.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "up_arch.h"
|
||||
|
||||
#include "stm32l4_pwm.h"
|
||||
#include "nucleo-l432kc.h"
|
||||
|
||||
#ifdef CONFIG_STM32_ADC1
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* The number of ADC channels in the conversion list */
|
||||
|
||||
#ifdef CONFIG_ADC_DMA
|
||||
# define ADC1_NCHANNELS 2
|
||||
#else
|
||||
# define ADC1_NCHANNELS 1
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Data
|
||||
************************************************************************************/
|
||||
/* Identifying number of each ADC channel. */
|
||||
|
||||
#ifdef CONFIG_AJOYSTICK
|
||||
#ifdef CONFIG_ADC_DMA
|
||||
/* The Itead analog joystick gets inputs on ADC_IN0 and ADC_IN1 */
|
||||
|
||||
static const uint8_t g_adc1_chanlist[ADC1_NCHANNELS] = {0, 1};
|
||||
|
||||
/* Configurations of pins used byte each ADC channels */
|
||||
|
||||
static const uint32_t g_adc1_pinlist[ADC1_NCHANNELS] = {GPIO_ADC1_IN0, GPIO_ADC1_IN0};
|
||||
|
||||
#else
|
||||
/* Without DMA, only a single channel can be supported */
|
||||
|
||||
/* The Itead analog joystick gets input on ADC_IN0 */
|
||||
|
||||
static const uint8_t g_adc1_chanlist[ADC1_NCHANNELS] = {0};
|
||||
|
||||
/* Configurations of pins used byte each ADC channels */
|
||||
|
||||
static const uint32_t g_adc1_pinlist[ADC1_NCHANNELS] = {GPIO_ADC1_IN0};
|
||||
|
||||
#endif /* CONFIG_ADC_DMA */
|
||||
#endif /* CONFIG_AJOYSTICK */
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_adc_setup
|
||||
*
|
||||
* Description:
|
||||
* Initialize ADC and register the ADC driver.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
int stm32_adc_setup(void)
|
||||
{
|
||||
struct adc_dev_s *adc;
|
||||
int ret;
|
||||
int i;
|
||||
|
||||
/* Configure the pins as analog inputs for the selected channels */
|
||||
|
||||
for (i = 0; i < ADC1_NCHANNELS; i++)
|
||||
{
|
||||
stm32_configgpio(g_adc1_pinlist[i]);
|
||||
}
|
||||
|
||||
/* Call stm32_adcinitialize() to get an instance of the ADC interface */
|
||||
|
||||
adc = stm32_adcinitialize(1, g_adc1_chanlist, ADC1_NCHANNELS);
|
||||
if (adc == NULL)
|
||||
{
|
||||
aerr("ERROR: Failed to get ADC interface\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Register the ADC driver at "/dev/adc0" */
|
||||
|
||||
ret = adc_register("/dev/adc0", adc);
|
||||
if (ret < 0)
|
||||
{
|
||||
aerr("ERROR: adc_register failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return OK;
|
||||
}
|
||||
|
||||
#endif /* CONFIG_STM32_ADC1 */
|
||||
@@ -0,0 +1,342 @@
|
||||
/****************************************************************************
|
||||
* configs/nucleo-l432kc/src/stm32l4_appinit.c
|
||||
*
|
||||
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <sys/types.h>
|
||||
#include <sys/mount.h>
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include <fcntl.h>
|
||||
#include <syslog.h>
|
||||
#include <errno.h>
|
||||
|
||||
#include <nuttx/arch.h>
|
||||
#include <nuttx/board.h>
|
||||
#include <nuttx/sdio.h>
|
||||
#include <nuttx/mmcsd.h>
|
||||
|
||||
#include <stm32l4.h>
|
||||
#include <stm32l4_uart.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "nucleo-l432kc.h"
|
||||
|
||||
#ifdef HAVE_RTC_DRIVER
|
||||
# include <nuttx/timers/rtc.h>
|
||||
# include "stm32l4_rtc.h"
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_netinitialize
|
||||
*
|
||||
* Description:
|
||||
* Dummy function expected to start-up logic.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_WL_CC3000
|
||||
void up_netinitialize(void)
|
||||
{
|
||||
}
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_app_initialize
|
||||
*
|
||||
* Description:
|
||||
* Perform application specific initialization. This function is never
|
||||
* called directly from application code, but only indirectly via the
|
||||
* (non-standard) boardctl() interface using the command BOARDIOC_INIT.
|
||||
*
|
||||
* Input Parameters:
|
||||
* arg - The boardctl() argument is passed to the board_app_initialize()
|
||||
* implementation without modification. The argument has no
|
||||
* meaning to NuttX; the meaning of the argument is a contract
|
||||
* between the board-specific initalization logic and the the
|
||||
* matching application logic. The value cold be such things as a
|
||||
* mode enumeration value, a set of DIP switch switch settings, a
|
||||
* pointer to configuration data read from a file or serial FLASH,
|
||||
* or whatever you would like to do with it. Every implementation
|
||||
* should accept zero/NULL as a default configuration.
|
||||
*
|
||||
* Returned Value:
|
||||
* Zero (OK) is returned on success; a negated errno value is returned on
|
||||
* any failure to indicate the nature of the failure.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
int board_app_initialize(uintptr_t arg)
|
||||
{
|
||||
#ifdef HAVE_RTC_DRIVER
|
||||
FAR struct rtc_lowerhalf_s *rtclower;
|
||||
#endif
|
||||
#ifdef CONFIG_QENCODER
|
||||
int index;
|
||||
char buf[9];
|
||||
#endif
|
||||
int ret;
|
||||
|
||||
(void)ret;
|
||||
|
||||
#ifdef HAVE_PROC
|
||||
/* Mount the proc filesystem */
|
||||
|
||||
syslog(LOG_INFO, "Mounting procfs to /proc\n");
|
||||
|
||||
ret = mount(NULL, CONFIG_NSH_PROC_MOUNTPOINT, "procfs", 0, NULL);
|
||||
if (ret < 0)
|
||||
{
|
||||
syslog(LOG_ERR,
|
||||
"ERROR: Failed to mount the PROC filesystem: %d (%d)\n",
|
||||
ret, errno);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef HAVE_RTC_DRIVER
|
||||
/* Instantiate the STM32L4 lower-half RTC driver */
|
||||
|
||||
rtclower = stm32l4_rtc_lowerhalf();
|
||||
if (!rtclower)
|
||||
{
|
||||
serr("ERROR: Failed to instantiate the RTC lower-half driver\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Bind the lower half driver and register the combined RTC driver
|
||||
* as /dev/rtc0
|
||||
*/
|
||||
|
||||
ret = rtc_initialize(0, rtclower);
|
||||
if (ret < 0)
|
||||
{
|
||||
serr("ERROR: Failed to bind/register the RTC driver: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef HAVE_MMCSD
|
||||
/* First, get an instance of the SDIO interface */
|
||||
|
||||
g_sdio = sdio_initialize(CONFIG_NSH_MMCSDSLOTNO);
|
||||
if (!g_sdio)
|
||||
{
|
||||
syslog(LOG_ERR, "ERROR: Failed to initialize SDIO slot %d\n",
|
||||
CONFIG_NSH_MMCSDSLOTNO);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Now bind the SDIO interface to the MMC/SD driver */
|
||||
|
||||
ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, g_sdio);
|
||||
if (ret != OK)
|
||||
{
|
||||
syslog(LOG_ERR,
|
||||
"ERROR: Failed to bind SDIO to the MMC/SD driver: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Then let's guess and say that there is a card in the slot. There is no
|
||||
* card detect GPIO.
|
||||
*/
|
||||
|
||||
sdio_mediachange(g_sdio, true);
|
||||
|
||||
syslog(LOG_INFO, "[boot] Initialized SDIO\n");
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PWM
|
||||
/* Initialize PWM and register the PWM device. */
|
||||
|
||||
ret = stm32l4_pwm_setup();
|
||||
if (ret < 0)
|
||||
{
|
||||
syslog(LOG_ERR, "ERROR: stm32l4_pwm_setup() failed: %d\n", ret);
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_ADC
|
||||
/* Initialize ADC and register the ADC driver. */
|
||||
|
||||
ret = stm32l4_adc_setup();
|
||||
if (ret < 0)
|
||||
{
|
||||
syslog(LOG_ERR, "ERROR: stm32l4_adc_setup failed: %d\n", ret);
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_AJOYSTICK
|
||||
/* Initialize and register the joystick driver */
|
||||
|
||||
ret = board_ajoy_initialize();
|
||||
if (ret != OK)
|
||||
{
|
||||
syslog(LOG_ERR,
|
||||
"ERROR: Failed to register the joystick driver: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_TIMER
|
||||
/* Initialize and register the timer driver */
|
||||
|
||||
ret = board_timer_driver_initialize("/dev/timer0", 2);
|
||||
if (ret != OK)
|
||||
{
|
||||
syslog(LOG_ERR,
|
||||
"ERROR: Failed to register the timer driver: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_QENCODER
|
||||
|
||||
/* Initialize and register the qencoder driver */
|
||||
|
||||
index = 0;
|
||||
|
||||
#ifdef CONFIG_STM32L4_TIM1_QE
|
||||
sprintf(buf, "/dev/qe%d", index++);
|
||||
ret = stm32l4_qencoder_initialize(buf, 1);
|
||||
if (ret != OK)
|
||||
{
|
||||
syslog(LOG_ERR,
|
||||
"ERROR: Failed to register the qencoder: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32L4_TIM2_QE
|
||||
sprintf(buf, "/dev/qe%d", index++);
|
||||
ret = stm32l4_qencoder_initialize(buf, 2);
|
||||
if (ret != OK)
|
||||
{
|
||||
syslog(LOG_ERR,
|
||||
"ERROR: Failed to register the qencoder: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32L4_TIM3_QE
|
||||
sprintf(buf, "/dev/qe%d", index++);
|
||||
ret = stm32l4_qencoder_initialize(buf, 3);
|
||||
if (ret != OK)
|
||||
{
|
||||
syslog(LOG_ERR,
|
||||
"ERROR: Failed to register the qencoder: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32L4_TIM4_QE
|
||||
sprintf(buf, "/dev/qe%d", index++);
|
||||
ret = stm32l4_qencoder_initialize(buf, 4);
|
||||
if (ret != OK)
|
||||
{
|
||||
syslog(LOG_ERR,
|
||||
"ERROR: Failed to register the qencoder: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32L4_TIM5_QE
|
||||
sprintf(buf, "/dev/qe%d", index++);
|
||||
ret = stm32l4_qencoder_initialize(buf, 5);
|
||||
if (ret != OK)
|
||||
{
|
||||
syslog(LOG_ERR,
|
||||
"ERROR: Failed to register the qencoder: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32L4_TIM8_QE
|
||||
sprintf(buf, "/dev/qe%d", index++);
|
||||
ret = stm32l4_qencoder_initialize(buf, 8);
|
||||
if (ret != OK)
|
||||
{
|
||||
syslog(LOG_ERR,
|
||||
"ERROR: Failed to register the qencoder: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
UNUSED(ret);
|
||||
return OK;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_BOARDCTL_IOCTL
|
||||
int board_ioctl(unsigned int cmd, uintptr_t arg)
|
||||
{
|
||||
return -ENOTTY;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_BOARDCTL_UNIQUEID)
|
||||
int board_uniqueid(uint8_t *uniqueid)
|
||||
{
|
||||
if (uniqueid == 0)
|
||||
{
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
stm32l4_get_uniqueid(uniqueid);
|
||||
return OK;
|
||||
}
|
||||
#endif
|
||||
|
||||
@@ -0,0 +1,96 @@
|
||||
/****************************************************************************
|
||||
* configs/nucleo-l432kc/src/stm32l4_autoleds.c
|
||||
*
|
||||
* Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/board.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "up_arch.h"
|
||||
#include "up_internal.h"
|
||||
#include "stm32l4.h"
|
||||
#include "nucleo-l432kc.h"
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_autoled_initialize
|
||||
****************************************************************************/
|
||||
|
||||
void board_autoled_initialize(void)
|
||||
{
|
||||
/* Configure LD2 GPIO for output */
|
||||
|
||||
stm32l4_configgpio(GPIO_LD2);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_autoled_on
|
||||
****************************************************************************/
|
||||
|
||||
void board_autoled_on(int led)
|
||||
{
|
||||
if (led == 1)
|
||||
{
|
||||
stm32l4_gpiowrite(GPIO_LD2, true);
|
||||
}
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_autoled_off
|
||||
****************************************************************************/
|
||||
|
||||
void board_autoled_off(int led)
|
||||
{
|
||||
if (led == 1)
|
||||
{
|
||||
stm32l4_gpiowrite(GPIO_LD2, false);
|
||||
}
|
||||
}
|
||||
|
||||
#endif /* CONFIG_ARCH_LEDS */
|
||||
@@ -0,0 +1,128 @@
|
||||
/************************************************************************************
|
||||
* configs/nucleo-l432kc/src/stm32l4_boot.c
|
||||
*
|
||||
* Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
* Librae <librae8226@gmail.com>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/arch.h>
|
||||
#include <nuttx/board.h>
|
||||
#include <nuttx/spi/spi.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "nucleo-l432kc.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Private Data
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32l4_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32L4 architectures must provide the following entry point. This entry point
|
||||
* is called early in the initialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32l4_boardinitialize(void)
|
||||
{
|
||||
/* Configure on-board LEDs if LED support has been selected. */
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
board_autoled_initialize();
|
||||
#endif
|
||||
|
||||
/* Configure SPI chip selects if 1) SP2 is not disabled, and 2) the weak function
|
||||
* stm32l4_spiinitialize() has been brought into the link.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_STM32L4_SPI1) || defined(CONFIG_STM32L4_SPI2) || defined(CONFIG_STM32L4_SPI3)
|
||||
stm32l4_spiinitialize();
|
||||
#endif
|
||||
|
||||
/* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not
|
||||
* disabled, and 3) the weak function stm32l4_usbinitialize() has been brought
|
||||
* into the build.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_USBDEV) && defined(CONFIG_STM32L4_USB)
|
||||
stm32l4_usbinitialize();
|
||||
#endif
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_initialize
|
||||
*
|
||||
* Description:
|
||||
* If CONFIG_BOARD_INITIALIZE is selected, then an additional
|
||||
* initialization call will be performed in the boot-up sequence to a
|
||||
* function called board_initialize(). board_initialize() will be
|
||||
* called immediately after up_intiialize() is called and just before the
|
||||
* initial application is started. This additional initialization phase
|
||||
* may be used, for example, to initialize board-specific device drivers.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_BOARD_INITIALIZE
|
||||
void board_initialize(void)
|
||||
{
|
||||
/* Perform NSH initialization here instead of from the NSH. This
|
||||
* alternative NSH initialization is necessary when NSH is ran in user-space
|
||||
* but the initialization function must run in kernel space.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_NSH_LIBRARY) && !defined(CONFIG_NSH_ARCHINIT)
|
||||
board_app_initialize(0);
|
||||
#endif
|
||||
|
||||
}
|
||||
#endif
|
||||
@@ -0,0 +1,126 @@
|
||||
/****************************************************************************
|
||||
* configs/nucleo-l432kc/src/stm32_buttons.c
|
||||
*
|
||||
* Copyright (C) 2014-2015, 2017 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <errno.h>
|
||||
|
||||
#include <nuttx/arch.h>
|
||||
#include <nuttx/board.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "nucleo-l432kc.h"
|
||||
|
||||
#ifdef CONFIG_ARCH_BUTTONS
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_button_initialize
|
||||
*
|
||||
* Description:
|
||||
* board_button_initialize() must be called to initialize button resources.
|
||||
* After that, board_buttons() may be called to collect the current state
|
||||
* of all buttons or board_button_irq() may be called to register button
|
||||
* interrupt handlers.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void board_button_initialize(void)
|
||||
{
|
||||
/* Configure the single button as an input. NOTE that EXTI interrupts are
|
||||
* also configured for the pin.
|
||||
*/
|
||||
|
||||
stm32_configgpio(GPIO_BTN_USER);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_buttons
|
||||
****************************************************************************/
|
||||
|
||||
uint32_t board_buttons(void)
|
||||
{
|
||||
/* Check that state of each USER button. A LOW value means that the key is
|
||||
* pressed.
|
||||
*/
|
||||
|
||||
bool released = stm32_gpioread(GPIO_BTN_USER);
|
||||
return !released;
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Button support.
|
||||
*
|
||||
* Description:
|
||||
* board_button_initialize() must be called to initialize button resources. After
|
||||
* that, board_buttons() may be called to collect the current state of all
|
||||
* buttons or board_button_irq() may be called to register button interrupt
|
||||
* handlers.
|
||||
*
|
||||
* After board_button_initialize() has been called, board_buttons() may be called to
|
||||
* collect the state of all buttons. board_buttons() returns an 32-bit bit set
|
||||
* with each bit associated with a button. See the BUTTON_*_BIT
|
||||
* definitions in board.h for the meaning of each bit.
|
||||
*
|
||||
* board_button_irq() may be called to register an interrupt handler that will
|
||||
* be called when a button is depressed or released. The ID value is a
|
||||
* button enumeration value that uniquely identifies a button resource. See the
|
||||
* BUTTON_* definitions in board.h for the meaning of enumeration
|
||||
* value.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_IRQBUTTONS
|
||||
int board_button_irq(int id, xcpt_t irqhandler, FAR void *arg)
|
||||
{
|
||||
int ret = -EINVAL;
|
||||
|
||||
if (id == BUTTON_USER)
|
||||
{
|
||||
ret = stm32_gpiosetevent(GPIO_BTN_USER, true, true, true, irqhandler, arg);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
#endif /* CONFIG_ARCH_BUTTONS */
|
||||
@@ -0,0 +1,272 @@
|
||||
/************************************************************************************
|
||||
* configs/nucleo-l432kc/src/stm32l4_pwm.c
|
||||
*
|
||||
* Copyright (C) 2011, 2015-2016 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Copyright (C) 2016 Sebastien Lorquet. All rights reserved.
|
||||
* Author: Sebastien Lorquet <sebastien@lorquet.fr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <errno.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/board.h>
|
||||
#include <nuttx/drivers/pwm.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "up_arch.h"
|
||||
#include "stm32l4_pwm.h"
|
||||
#include "nucleo-l432kc.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
/* Configuration *******************************************************************/
|
||||
/* PWM
|
||||
*
|
||||
* The STM3240G-Eval has no real on-board PWM devices, but the board can be
|
||||
* configured to output a pulse train using variously unused pins on the board for
|
||||
* PWM output (see board.h for details of pins).
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_PWM
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32l4_pwm_setup
|
||||
*
|
||||
* Description:
|
||||
* Initialize PWM and register the PWM device.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
int stm32l4_pwm_setup(void)
|
||||
{
|
||||
static bool initialized = false;
|
||||
struct pwm_lowerhalf_s *pwm;
|
||||
int ret;
|
||||
|
||||
/* Have we already initialized? */
|
||||
|
||||
if (!initialized)
|
||||
{
|
||||
/* Call stm32l4_pwminitialize() to get an instance of the PWM interface */
|
||||
|
||||
/* PWM
|
||||
*
|
||||
* The Nucleo-l432kc has no real on-board PWM devices, but the board can be
|
||||
* configured to output a pulse train using TIM1 or 8, or others (see board.h).
|
||||
* Let's figure out which the user has configured.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_STM32L4_TIM1_PWM)
|
||||
pwm = stm32l4_pwminitialize(1);
|
||||
if (!pwm)
|
||||
{
|
||||
aerr("ERROR: Failed to get the STM32L4 PWM lower half\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Register the PWM driver at "/dev/pwm0" */
|
||||
|
||||
ret = pwm_register("/dev/pwm0", pwm);
|
||||
if (ret < 0)
|
||||
{
|
||||
aerr("ERROR: pwm_register failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_STM32L4_TIM2_PWM)
|
||||
pwm = stm32l4_pwminitialize(2);
|
||||
if (!pwm)
|
||||
{
|
||||
aerr("ERROR: Failed to get the STM32L4 PWM lower half\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Register the PWM driver at "/dev/pwm1" */
|
||||
|
||||
ret = pwm_register("/dev/pwm1", pwm);
|
||||
if (ret < 0)
|
||||
{
|
||||
aerr("ERROR: pwm_register failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_STM32L4_TIM3_PWM)
|
||||
pwm = stm32l4_pwminitialize(3);
|
||||
if (!pwm)
|
||||
{
|
||||
aerr("ERROR: Failed to get the STM32L4 PWM lower half\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Register the PWM driver at "/dev/pwm2" */
|
||||
|
||||
ret = pwm_register("/dev/pwm2", pwm);
|
||||
if (ret < 0)
|
||||
{
|
||||
aerr("ERROR: pwm_register failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_STM32L4_TIM4_PWM)
|
||||
pwm = stm32l4_pwminitialize(4);
|
||||
if (!pwm)
|
||||
{
|
||||
aerr("ERROR: Failed to get the STM32L4 PWM lower half\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Register the PWM driver at "/dev/pwm3" */
|
||||
|
||||
ret = pwm_register("/dev/pwm3", pwm);
|
||||
if (ret < 0)
|
||||
{
|
||||
aerr("ERROR: pwm_register failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_STM32L4_TIM5_PWM)
|
||||
pwm = stm32l4_pwminitialize(5);
|
||||
if (!pwm)
|
||||
{
|
||||
aerr("ERROR: Failed to get the STM32L4 PWM lower half\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Register the PWM driver at "/dev/pwm4" */
|
||||
|
||||
ret = pwm_register("/dev/pwm4", pwm);
|
||||
if (ret < 0)
|
||||
{
|
||||
aerr("ERROR: pwm_register failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_STM32L4_TIM8_PWM)
|
||||
pwm = stm32l4_pwminitialize(8);
|
||||
if (!pwm)
|
||||
{
|
||||
aerr("ERROR: Failed to get the STM32L4 PWM lower half\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Register the PWM driver at "/dev/pwm5" */
|
||||
|
||||
ret = pwm_register("/dev/pwm5", pwm);
|
||||
if (ret < 0)
|
||||
{
|
||||
aerr("ERROR: pwm_register failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_STM32L4_TIM15_PWM)
|
||||
pwm = stm32l4_pwminitialize(15);
|
||||
if (!pwm)
|
||||
{
|
||||
aerr("ERROR: Failed to get the STM32L4 PWM lower half\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Register the PWM driver at "/dev/pwm6" */
|
||||
|
||||
ret = pwm_register("/dev/pwm6", pwm);
|
||||
if (ret < 0)
|
||||
{
|
||||
aerr("ERROR: pwm_register failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_STM32L4_TIM16_PWM)
|
||||
pwm = stm32l4_pwminitialize(16);
|
||||
if (!pwm)
|
||||
{
|
||||
aerr("ERROR: Failed to get the STM32L4 PWM lower half\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Register the PWM driver at "/dev/pwm7" */
|
||||
|
||||
ret = pwm_register("/dev/pwm7", pwm);
|
||||
if (ret < 0)
|
||||
{
|
||||
aerr("ERROR: pwm_register failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_STM32L4_TIM17_PWM)
|
||||
pwm = stm32l4_pwminitialize(17);
|
||||
if (!pwm)
|
||||
{
|
||||
aerr("ERROR: Failed to get the STM32L4 PWM lower half\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Register the PWM driver at "/dev/pwm8" */
|
||||
|
||||
ret = pwm_register("/dev/pwm8", pwm);
|
||||
if (ret < 0)
|
||||
{
|
||||
aerr("ERROR: pwm_register failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
/* Now we are initialized */
|
||||
|
||||
initialized = true;
|
||||
}
|
||||
|
||||
return OK;
|
||||
}
|
||||
|
||||
#endif /* CONFIG_PWM */
|
||||
|
||||
@@ -0,0 +1,83 @@
|
||||
/************************************************************************************
|
||||
* configs/nucleo-l432kc/src/stm32_qencoder.c
|
||||
*
|
||||
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Copyright (C) 2016 Sebastien Lorquet. All rights reserved.
|
||||
* Author: Sebastien Lorquet <sebastien@lorquet.fr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <errno.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/sensors/qencoder.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "up_arch.h"
|
||||
#include "stm32l4_qencoder.h"
|
||||
#include "nucleo-l432kc.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: qe_devinit
|
||||
*
|
||||
* Description:
|
||||
* All STM32L4 architectures must provide the following interface to work with
|
||||
* examples/qencoder.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
int stm32l4_qencoder_initialize(FAR const char *devpath, int timer)
|
||||
{
|
||||
int ret;
|
||||
|
||||
/* Initialize a quadrature encoder interface. */
|
||||
|
||||
sninfo("Initializing the quadrature encoder using TIM%d\n", timer);
|
||||
ret = stm32l4_qeinitialize(devpath, timer);
|
||||
if (ret < 0)
|
||||
{
|
||||
snerr("ERROR: stm32l4_qeinitialize failed: %d\n", ret);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
@@ -0,0 +1,202 @@
|
||||
/****************************************************************************
|
||||
* configs/nucleo-l432kc/src/stm32l4_spi.c
|
||||
*
|
||||
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
#include <errno.h>
|
||||
|
||||
#include <nuttx/spi/spi.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include <up_arch.h>
|
||||
#include <chip.h>
|
||||
#include <stm32l4.h>
|
||||
|
||||
#include "nucleo-l432kc.h"
|
||||
|
||||
#if defined(CONFIG_STM32L4_SPI1) || defined(CONFIG_STM32L4_SPI2)
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
/* Global driver instances */
|
||||
|
||||
#ifdef CONFIG_STM32L4_SPI1
|
||||
struct spi_dev_s *g_spi1;
|
||||
#endif
|
||||
#ifdef CONFIG_STM32L4_SPI2
|
||||
struct spi_dev_s *g_spi2;
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32l4_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the Nucleo-L432KC board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32l4_spiinitialize(void)
|
||||
{
|
||||
#ifdef CONFIG_STM32L4_SPI1
|
||||
|
||||
g_spi1 = stm32l4_spibus_initialize(1);
|
||||
|
||||
#ifdef HAVE_MMCSD
|
||||
stm32l4_configgpio(GPIO_SPI_CS_SD_CARD);
|
||||
#endif
|
||||
|
||||
_info("SPI1 initialized\n");
|
||||
|
||||
#ifdef CONFIG_STM32L4_SPI2
|
||||
/* Configure SPI-based devices */
|
||||
|
||||
g_spi2 = stm32l4_spibus_initialize(2);
|
||||
|
||||
/* Setup CS, EN & IRQ line IOs */
|
||||
|
||||
_info("SPI2 initialized\n");
|
||||
#endif
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32l4_spi1/2select and stm32l4_spi1/2status
|
||||
*
|
||||
* Description:
|
||||
* The external functions, stm32l4_spi1/2select and stm32l4_spi1/2status must be
|
||||
* provided by board-specific logic. They are implementations of the select
|
||||
* and status methods of the SPI interface defined by struct spi_ops_s (see
|
||||
* include/nuttx/spi/spi.h). All other methods (including up_spiinitialize())
|
||||
* are provided by common STM32 logic. To use this common SPI logic on your
|
||||
* board:
|
||||
*
|
||||
* 1. Provide logic in stm32l4_boardinitialize() to configure SPI chip select
|
||||
* pins.
|
||||
* 2. Provide stm32l4_spi1/2select() and stm32l4_spi1/2status() functions in your
|
||||
* board-specific logic. These functions will perform chip selection and
|
||||
* status operations using GPIOs in the way your board is configured.
|
||||
* 3. Add a calls to up_spiinitialize() in your low level application
|
||||
* initialization logic
|
||||
* 4. The handle returned by up_spiinitialize() may then be used to bind the
|
||||
* SPI driver to higher level logic (e.g., calling
|
||||
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
|
||||
* the SPI MMC/SD driver).
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_STM32L4_SPI1
|
||||
void stm32l4_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
|
||||
{
|
||||
spiinfo("devid: %08X CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
|
||||
#ifdef HAVE_MMCSD
|
||||
if (devid == SPIDEV_MMCSD(0))
|
||||
{
|
||||
stm32l4_gpiowrite(GPIO_SPI_CS_SD_CARD, !selected);
|
||||
}
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
uint8_t stm32l4_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32L4_SPI2
|
||||
void stm32l4_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
|
||||
{
|
||||
spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
|
||||
}
|
||||
|
||||
uint8_t stm32l4_spi2status(FAR struct spi_dev_s *dev, uint32_t devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32l4_spi1cmddata
|
||||
*
|
||||
* Description:
|
||||
* Set or clear the SH1101A A0 or SD1306 D/C n bit to select data (true)
|
||||
* or command (false). This function must be provided by platform-specific
|
||||
* logic. This is an implementation of the cmddata method of the SPI
|
||||
* interface defined by struct spi_ops_s (see include/nuttx/spi/spi.h).
|
||||
*
|
||||
* Input Parameters:
|
||||
*
|
||||
* spi - SPI device that controls the bus the device that requires the CMD/
|
||||
* DATA selection.
|
||||
* devid - If there are multiple devices on the bus, this selects which one
|
||||
* to select cmd or data. NOTE: This design restricts, for example,
|
||||
* one one SPI display per SPI bus.
|
||||
* cmd - true: select command; false: select data
|
||||
*
|
||||
* Returned Value:
|
||||
* None
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_SPI_CMDDATA
|
||||
#ifdef CONFIG_STM32L4_SPI1
|
||||
int stm32l4_spi1cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
|
||||
{
|
||||
return OK;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32L4_SPI2
|
||||
int stm32l4_spi2cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
|
||||
{
|
||||
return OK;
|
||||
}
|
||||
#endif
|
||||
#endif /* CONFIG_SPI_CMDDATA */
|
||||
|
||||
#endif /* CONFIG_STM32L4_SPI1 || CONFIG_STM32L4_SPI2 */
|
||||
@@ -0,0 +1,82 @@
|
||||
/****************************************************************************
|
||||
* config/nucleo-l432kc/src/stm32_timer.c
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Copied from nucleo-f303 by Sebastien Lorquet
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/timers/timer.h>
|
||||
|
||||
#include <debug.h>
|
||||
|
||||
#include "stm32l4_tim.h"
|
||||
#include "nucleo-l432kc.h"
|
||||
|
||||
#ifdef CONFIG_TIMER
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_timer_driver_initialize
|
||||
*
|
||||
* Description:
|
||||
* Configure the timer driver.
|
||||
*
|
||||
* Input Parameters:
|
||||
* devpath - The full path to the timer device. This should be of the
|
||||
* form /dev/timer0
|
||||
* timer - The timer's number.
|
||||
*
|
||||
* Returned Values:
|
||||
* Zero (OK) is returned on success; A negated errno value is returned
|
||||
* to indicate the nature of any failure.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
int board_timer_driver_initialize(FAR const char *devpath, int timer)
|
||||
{
|
||||
return stm32l4_timer_initialize(devpath, timer);
|
||||
}
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,217 @@
|
||||
/****************************************************************************
|
||||
* configs/nucleo-l432kc/src/stm32_userleds.c
|
||||
*
|
||||
* Copyright (C) 2014-2016 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
#include <nuttx/power/pm.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "up_arch.h"
|
||||
#include "up_internal.h"
|
||||
#include "stm32l4.h"
|
||||
#include "nucleo-l432kc.h"
|
||||
|
||||
#ifndef CONFIG_ARCH_LEDS
|
||||
|
||||
/****************************************************************************
|
||||
* Private Function Prototypes
|
||||
****************************************************************************/
|
||||
|
||||
/* LED Power Management */
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static void led_pm_notify(struct pm_callback_s *cb, int domain,
|
||||
enum pm_state_e pmstate);
|
||||
static int led_pm_prepare(struct pm_callback_s *cb, int domain,
|
||||
enum pm_state_e pmstate);
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static struct pm_callback_s g_ledscb =
|
||||
{
|
||||
.notify = led_pm_notify,
|
||||
.prepare = led_pm_prepare,
|
||||
};
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: led_pm_notify
|
||||
*
|
||||
* Description:
|
||||
* Notify the driver of new power state. This callback is called after
|
||||
* all drivers have had the opportunity to prepare for the new power state.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static void led_pm_notify(struct pm_callback_s *cb, int domain,
|
||||
enum pm_state_e pmstate)
|
||||
{
|
||||
switch (pmstate)
|
||||
{
|
||||
case(PM_NORMAL):
|
||||
{
|
||||
/* Restore normal LEDs operation */
|
||||
|
||||
}
|
||||
break;
|
||||
|
||||
case(PM_IDLE):
|
||||
{
|
||||
/* Entering IDLE mode - Turn leds off */
|
||||
|
||||
}
|
||||
break;
|
||||
|
||||
case(PM_STANDBY):
|
||||
{
|
||||
/* Entering STANDBY mode - Logic for PM_STANDBY goes here */
|
||||
|
||||
}
|
||||
break;
|
||||
|
||||
case(PM_SLEEP):
|
||||
{
|
||||
/* Entering SLEEP mode - Logic for PM_SLEEP goes here */
|
||||
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
{
|
||||
/* Should not get here */
|
||||
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: led_pm_prepare
|
||||
*
|
||||
* Description:
|
||||
* Request the driver to prepare for a new power state. This is a warning
|
||||
* that the system is about to enter into a new power state. The driver
|
||||
* should begin whatever operations that may be required to enter power
|
||||
* state. The driver may abort the state change mode by returning a
|
||||
* non-zero value from the callback function.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static int led_pm_prepare(struct pm_callback_s *cb, int domain,
|
||||
enum pm_state_e pmstate)
|
||||
{
|
||||
/* No preparation to change power modes is required by the LEDs driver.
|
||||
* We always accept the state change by returning OK.
|
||||
*/
|
||||
|
||||
return OK;
|
||||
}
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_userled_initialize
|
||||
****************************************************************************/
|
||||
|
||||
void board_userled_initialize(void)
|
||||
{
|
||||
/* Configure LD2 GPIO for output */
|
||||
|
||||
stm32_configgpio(GPIO_LD2);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_userled
|
||||
****************************************************************************/
|
||||
|
||||
void board_userled(int led, bool ledon)
|
||||
{
|
||||
if (led == 1)
|
||||
{
|
||||
stm32_gpiowrite(GPIO_LD2, ldeon);
|
||||
}
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_userled_all
|
||||
****************************************************************************/
|
||||
|
||||
void board_userled_all(uint8_t ledset)
|
||||
{
|
||||
if (led == 1)
|
||||
{
|
||||
stm32_gpiowrite(GPIO_LD2, (ledset & BOARD_LD2_BIT) != 0);
|
||||
}
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32_led_pminitialize
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
void stm32_led_pminitialize(void)
|
||||
{
|
||||
/* Register to receive power management callbacks */
|
||||
|
||||
int ret = pm_register(&g_ledscb);
|
||||
DEBUGASSERT(ret == OK);
|
||||
UNUSED(ret);
|
||||
}
|
||||
#endif /* CONFIG_PM */
|
||||
|
||||
#endif /* !CONFIG_ARCH_LEDS */
|
||||
Reference in New Issue
Block a user