Prep for 5.15 release

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3169 42af7a65-404d-4744-a932-0658087f49c3

ChangeLog

@@ -1360,13 +1360,14 @@
 	  handling in send() and in uip_tcpinput.c; uip_tcpinput.c thought (incorrectly)
 	  that all of the bytes were acknowledged; send.c knew that they were not.
 
-5.15 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
+5.15 2010-12-12 Gregory Nutt <spudmonkey@racsa.co.cr>
 
 	* net/uip/uip_tcpaddsend.c and net/send.c -- Another place where the TCP sequence
 	  number problem "fixed" in 5.14 might occur.
 	* net/send.c -- Check if the destination IP address is in the ARP table.  If
 	  not, then don't consider the packet sent.  It won't be, an ARP packet will go
-	  out instead.
+	  out instead.  This improves behavior, for example, on the first GET request
+	  from a browser.
 	* arch/arm/src/lpc17xx/lpc17_emacram.h and lpc17_allocateheap.c -- The Ethernet
 	  logic was using all of AHB SRAM Bank0 for Ethernet packet buffers (16Kb).  An
 	  option was added to limit the amount of SRAM used for packet buffering and to
@@ -1376,16 +1377,16 @@
 	* arch/arm/src/lpc17xx/lpc17_ssp.c -- Fix compilation errors when SSP1 is
 	  selected.
 	* configs/olimex-lpc1766stk/nsh -- Enable network and SD/MMC card support in
-	  NSH.  Networking and telnetd interface functional.  Still testing SPI-based
-	  SD/MMC.
+	  NSH.  Networking and telnetd interface as well as SPI-based microSD are
+	  now functional.
 	* examples/nsh/nsh_netinit.c -- Fix NSH bug.  If CONFIG_NET is selected, but
 	  CONFIG_EXAMPLES_NSH_TELNETD is not selected, then the network is never
-      initialized and bad things happen if you try to ping.
+	  initialized and bad things happen if you try to ping.
 	* drivers/lcd -- Add header files for the Phillips PCF8833 LCD controller and
 	  for the Epson S1D15G10 LCD controller.  A driver for the Nokia 6100 LCD is
 	  coming.
 	* include/nuttx/spi.h and almost all other SPI files -- Added an optional
-	  cmddata() method to the SPI interface.  Some devices require and additional
+	  cmddata() method to the SPI interface.  Some devices require an additional
 	  out-of-band bit to specify if the next word sent to the device is a command
 	  or data. This is typical, for example, in "9-bit" displays where the 9th bit
 	  is the CMD/DATA bit. The cmddata method provides selection of command or data.
@@ -1396,8 +1397,12 @@
 	* drivers/usbdev/usbserial.c and usbstorage.c -- All USB class drivers need
 	  to call DEV_CONNECT() when they are ready to be enumerated.  That is,
 	  (1) initially when bound to the USB driver, and (2) after a USB reset.
-	* drivers/lcd/nokia6100.c -- A driver for the Nokia 6100 LCD.
+	* drivers/lcd/nokia6100.c -- A driver for the Nokia 6100 LCD.  This driver
+	  has not be verified as of the initial check-in.
 	* configs/olimex-lpc1766stk/nx -- A NX graphics configuration for the Olimex
-	  LPC1766-STK board using the Nokia 6100 LCD driver.
+	  LPC1766-STK board using the Nokia 6100 LCD driver.  This configuration has
+	  not been verified as of the initial check-in.
 	* include/nuttx/spi.h -- the SPI_SETBITS macro was calling the setmode method.
 	  This is a very important bug-fix in some usages.
+
+5.16 2011-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>

ReleaseNotes

@@ -1532,3 +1532,43 @@ for the NuttX network test, and for the THTTPD webserver. (Additional USB
 configurations are in the release as well, but those have not yet been verified. 
 Goals for NuttX-5.15 (and beyond) include: (1) Verified USB support, (2) SD card
 support, and (3) LCD support.
+
+nuttx-5.15
+^^^^^^^^^^
+
+The 62nd release of NuttX, nuttx-5.15, was mad on December 12, 2010.  This
+release includes several bugfixes as well as feature enhancements, primarily
+for the Olimex LPC1766-STK board.
+
+Important bugfxes included:
+
+	* Additional fixes needed with the TCP sequence number problem "fixed" in
+	  nuttx-5.14.
+	* In the send() logic, now checks if the destination IP address is in the
+	  ARP table before sending the packet; an ARP request will go out instead.
+	  This improves behavior, for example, on the first on the first GET request
+	  from a browser
+	* All USB class drivers need to call DEV_CONNECT() when they are ready to
+	  be enumerated.  That is, (1) initially when bound to the USB driver, and
+	  (2) after a USB reset.
+	* The SPI_SETBITS macro was calling the SPI setmode method.
+	* And several other bug fixes of lower criticality (see the ChangeLog for
+	  details).
+
+And feature enhancements:
+
+	* The LPC176x Ethernet driver was using all of AHB SRAM Bank0 for Ethernet
+	  packet buffers (16Kb).  An option was added to limit the amount of SRAM
+	  used for packet buffering and to re-use any extra Bank0 memory for heap.
+	* Enabled networking and SD/MMC card support in the Olimex LPC1766-STK
+	  NuttShell (NSH) configuration.
+	* The LPC176x USB driver is now fully fully functional.
+	* Added an optional cmddata() method to the SPI interface.  Some devices
+	  require an additional out-of-band bit to specify if the next word sent
+	  to the device is a command or data. The cmddata method provides selection
+	  of command or data.
+	* A driver for the Nokia 6100 LCD (with either the Phillips PCF8833 LCD
+	  controller and for the Epson S1D15G10 LCD controller) and an NX graphics
+	  configuration for the Olimex LPC1766-STK have been added.  However,
+	  neither the LCD driver nor the NX configuration have been verified
+	  as of the this release.