mirror of
https://github.com/apache/nuttx.git
synced 2026-06-06 00:14:22 +08:00
clicker2-stm32: Add a configuratino that will, eventually, be used for 6loWPAN testing.
This commit is contained in:
Gregory Nutt
@@ -352,6 +352,35 @@ Configurations
|
||||
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
|
||||
mrf24j40-6lowpan
|
||||
|
||||
This is another version of nsh that is very similar to the mrf24j40-mac
|
||||
configuration but is focused on testing the IEEE 802.15.4 MAC integration
|
||||
with the 6loWPAN network stack. I derives directly from the mrf24j40-mac
|
||||
and all NOTES provided there apply. Additional differences are summarized
|
||||
below:
|
||||
|
||||
NOTES:
|
||||
|
||||
1. This is another NSH example. If differs from the mrf24j40
|
||||
configuration in that this configuration, like the usbnsh
|
||||
configuration, it uses a USB serial device for console I/O.
|
||||
Such a configuration is useful on the Clicker2 STM32 which
|
||||
has no builtin RS-232 drivers and tangle of cables and jumpers
|
||||
needed to debug multi-board setups.
|
||||
|
||||
Other NOTES for the usbnsh configuration should appy.
|
||||
|
||||
2. This configuration does have USART3 output enabled and set up as
|
||||
the system logging device:
|
||||
|
||||
CONFIG_SYSLOG_CHAR=y : Use a character device for system logging
|
||||
CONFIG_SYSLOG_DEVPATH="/dev/ttyS0" : USART3 will be /dev/ttyS0
|
||||
|
||||
However, there is nothing to generate SYLOG output in the default
|
||||
configuration so nothing should appear on USART3 unless you enable
|
||||
some debug output or enable the USB monitor.
|
||||
|
||||
nsh:
|
||||
|
||||
Configures the NuttShell (nsh) located at examples/nsh. This
|
||||
|
||||
@@ -0,0 +1,122 @@
|
||||
############################################################################
|
||||
# configs/clicker2-stm32/mrf24j40-6lowpan/Make.defs
|
||||
#
|
||||
# Copyright (C) 2017 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
LDSCRIPT = flash.ld
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mkwindeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
||||
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -fno-rtti
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
|
||||
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
# Loadable module definitions
|
||||
|
||||
CMODULEFLAGS = $(CFLAGS) -mlong-calls # --target1-abs
|
||||
|
||||
LDMODULEFLAGS = -r -e module_initialize
|
||||
ifeq ($(WINTOOL),y)
|
||||
LDMODULEFLAGS += -T "${shell cygpath -w $(TOPDIR)/libc/modlib/gnu-elf.ld}"
|
||||
else
|
||||
LDMODULEFLAGS += -T $(TOPDIR)/libc/modlib/gnu-elf.ld
|
||||
endif
|
||||
|
||||
ASMEXT = .S
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
File diff suppressed because it is too large
Load Diff
@@ -16,7 +16,7 @@ CONFIG_HOST_LINUX=y
|
||||
#
|
||||
# Build Configuration
|
||||
#
|
||||
CONFIG_APPS_DIR="../apps"
|
||||
# CONFIG_APPS_DIR="../apps"
|
||||
CONFIG_BUILD_FLAT=y
|
||||
# CONFIG_BUILD_2PASS is not set
|
||||
|
||||
|
||||
@@ -120,12 +120,11 @@ CONFIG_ARCH_CORTEXM4=y
|
||||
# CONFIG_ARCH_CORTEXR4 is not set
|
||||
# CONFIG_ARCH_CORTEXR4F is not set
|
||||
# CONFIG_ARCH_CORTEXR5 is not set
|
||||
# CONFIG_ARCH_CORTEX5F is not set
|
||||
# CONFIG_ARCH_CORTEXR5F is not set
|
||||
# CONFIG_ARCH_CORTEXR7 is not set
|
||||
# CONFIG_ARCH_CORTEXR7F is not set
|
||||
CONFIG_ARCH_FAMILY="armv7-m"
|
||||
CONFIG_ARCH_CHIP="stm32"
|
||||
# CONFIG_ARCH_TOOLCHAIN_IAR is not set
|
||||
# CONFIG_ARMV7M_USEBASEPRI is not set
|
||||
CONFIG_ARCH_HAVE_CMNVECTOR=y
|
||||
# CONFIG_ARMV7M_CMNVECTOR is not set
|
||||
@@ -394,6 +393,7 @@ CONFIG_STM32_HAVE_I2C2=y
|
||||
CONFIG_STM32_HAVE_I2C3=y
|
||||
CONFIG_STM32_HAVE_SPI2=y
|
||||
CONFIG_STM32_HAVE_SPI3=y
|
||||
CONFIG_STM32_HAVE_I2S3=y
|
||||
# CONFIG_STM32_HAVE_SPI4 is not set
|
||||
# CONFIG_STM32_HAVE_SPI5 is not set
|
||||
# CONFIG_STM32_HAVE_SPI6 is not set
|
||||
@@ -432,6 +432,7 @@ CONFIG_STM32_PWR=y
|
||||
# CONFIG_STM32_SPI1 is not set
|
||||
# CONFIG_STM32_SPI2 is not set
|
||||
# CONFIG_STM32_SPI3 is not set
|
||||
# CONFIG_STM32_I2S3 is not set
|
||||
CONFIG_STM32_SYSCFG=y
|
||||
# CONFIG_STM32_TIM1 is not set
|
||||
# CONFIG_STM32_TIM2 is not set
|
||||
@@ -527,6 +528,7 @@ CONFIG_STM32_USART3_SERIALDRIVER=y
|
||||
#
|
||||
# USB Device Configuration
|
||||
#
|
||||
# CONFIG_ARCH_TOOLCHAIN_IAR is not set
|
||||
CONFIG_ARCH_TOOLCHAIN_GNU=y
|
||||
|
||||
#
|
||||
@@ -1075,7 +1077,6 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
#
|
||||
# CONFIG_C99_BOOL8 is not set
|
||||
CONFIG_HAVE_CXX=y
|
||||
CONFIG_HAVE_CXXINITIALIZE=y
|
||||
# CONFIG_CXX_NEWLONG is not set
|
||||
|
||||
#
|
||||
@@ -1305,6 +1306,7 @@ CONFIG_NSH_CONSOLE=y
|
||||
# Platform-specific Support
|
||||
#
|
||||
# CONFIG_PLATFORM_CONFIGDATA is not set
|
||||
CONFIG_HAVE_CXXINITIALIZE=y
|
||||
|
||||
#
|
||||
# System Libraries and NSH Add-Ons
|
||||
|
||||
@@ -120,12 +120,11 @@ CONFIG_ARCH_CORTEXM4=y
|
||||
# CONFIG_ARCH_CORTEXR4 is not set
|
||||
# CONFIG_ARCH_CORTEXR4F is not set
|
||||
# CONFIG_ARCH_CORTEXR5 is not set
|
||||
# CONFIG_ARCH_CORTEX5F is not set
|
||||
# CONFIG_ARCH_CORTEXR5F is not set
|
||||
# CONFIG_ARCH_CORTEXR7 is not set
|
||||
# CONFIG_ARCH_CORTEXR7F is not set
|
||||
CONFIG_ARCH_FAMILY="armv7-m"
|
||||
CONFIG_ARCH_CHIP="stm32"
|
||||
# CONFIG_ARCH_TOOLCHAIN_IAR is not set
|
||||
# CONFIG_ARMV7M_USEBASEPRI is not set
|
||||
CONFIG_ARCH_HAVE_CMNVECTOR=y
|
||||
# CONFIG_ARMV7M_CMNVECTOR is not set
|
||||
@@ -394,6 +393,7 @@ CONFIG_STM32_HAVE_I2C2=y
|
||||
CONFIG_STM32_HAVE_I2C3=y
|
||||
CONFIG_STM32_HAVE_SPI2=y
|
||||
CONFIG_STM32_HAVE_SPI3=y
|
||||
CONFIG_STM32_HAVE_I2S3=y
|
||||
# CONFIG_STM32_HAVE_SPI4 is not set
|
||||
# CONFIG_STM32_HAVE_SPI5 is not set
|
||||
# CONFIG_STM32_HAVE_SPI6 is not set
|
||||
@@ -432,6 +432,7 @@ CONFIG_STM32_PWR=y
|
||||
# CONFIG_STM32_SPI1 is not set
|
||||
# CONFIG_STM32_SPI2 is not set
|
||||
# CONFIG_STM32_SPI3 is not set
|
||||
# CONFIG_STM32_I2S3 is not set
|
||||
CONFIG_STM32_SYSCFG=y
|
||||
# CONFIG_STM32_TIM1 is not set
|
||||
# CONFIG_STM32_TIM2 is not set
|
||||
@@ -527,6 +528,7 @@ CONFIG_STM32_USART3_SERIALDRIVER=y
|
||||
#
|
||||
# USB Device Configuration
|
||||
#
|
||||
# CONFIG_ARCH_TOOLCHAIN_IAR is not set
|
||||
CONFIG_ARCH_TOOLCHAIN_GNU=y
|
||||
|
||||
#
|
||||
@@ -1124,7 +1126,6 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
#
|
||||
# CONFIG_C99_BOOL8 is not set
|
||||
CONFIG_HAVE_CXX=y
|
||||
CONFIG_HAVE_CXXINITIALIZE=y
|
||||
# CONFIG_CXX_NEWLONG is not set
|
||||
|
||||
#
|
||||
@@ -1356,6 +1357,7 @@ CONFIG_NSH_ARCHINIT=y
|
||||
# Platform-specific Support
|
||||
#
|
||||
# CONFIG_PLATFORM_CONFIGDATA is not set
|
||||
CONFIG_HAVE_CXXINITIALIZE=y
|
||||
|
||||
#
|
||||
# System Libraries and NSH Add-Ons
|
||||
|
||||
Reference in New Issue
Block a user