mirror of
https://github.com/apache/nuttx.git
synced 2026-06-06 08:36:24 +08:00
Add Vishay VEML6070 driver and support for STM32F103-Minimum board
This commit is contained in:
Alan Carvalho de Assis
committed by
Gregory Nutt
Gregory Nutt
parent
c7b5f20b5d
commit
a6b7730f8c
@@ -234,6 +234,13 @@ config QENCODER
|
||||
bool "Qencoder"
|
||||
default n
|
||||
|
||||
config VEML6070
|
||||
bool "Vishay VEML6070 UV-A Light Sensor support"
|
||||
default n
|
||||
select I2C
|
||||
---help---
|
||||
Enable driver support for the Vishay VEML6070 UV-A light sensor.
|
||||
|
||||
config XEN1210
|
||||
bool "Sensixs XEN1210 Magnetometer"
|
||||
default n
|
||||
|
||||
@@ -138,6 +138,12 @@ ifeq ($(CONFIG_QENCODER),y)
|
||||
CSRCS += qencoder.c
|
||||
endif
|
||||
|
||||
# Vishay VEML6070
|
||||
|
||||
ifeq ($(CONFIG_VEML6070),y)
|
||||
CSRCS += veml6070.c
|
||||
endif
|
||||
|
||||
# Sensixs XEN1210
|
||||
|
||||
ifeq ($(CONFIG_XEN1210),y)
|
||||
|
||||
@@ -0,0 +1,352 @@
|
||||
/****************************************************************************
|
||||
* drivers/sensors/veml6070.c
|
||||
* Character driver for the Vishay UV-A Light Sensor VEML6070
|
||||
*
|
||||
* Copyright (C) 2016 Alan Carvalho de Assis. All rights reserved.
|
||||
* Author: Alan Carvalho de Assis <acassis@gmail.com>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <errno.h>
|
||||
#include <debug.h>
|
||||
#include <stdlib.h>
|
||||
|
||||
#include <nuttx/kmalloc.h>
|
||||
#include <nuttx/fs/fs.h>
|
||||
#include <nuttx/i2c/i2c_master.h>
|
||||
#include <nuttx/sensors/veml6070.h>
|
||||
|
||||
#if defined(CONFIG_I2C) && defined(CONFIG_VEML6070)
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-process Definitions
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef CONFIG_VEML6070_I2C_FREQUENCY
|
||||
# define CONFIG_VEML6070_I2C_FREQUENCY 100000
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Private Types
|
||||
****************************************************************************/
|
||||
|
||||
struct veml6070_dev_s
|
||||
{
|
||||
FAR struct i2c_master_s *i2c; /* I2C interface */
|
||||
uint8_t addr; /* I2C address */
|
||||
};
|
||||
|
||||
/****************************************************************************
|
||||
* Private Function Prototypes
|
||||
****************************************************************************/
|
||||
|
||||
/* I2C Helpers */
|
||||
|
||||
static int veml6070_read8(FAR struct veml6070_dev_s *priv, int offset,
|
||||
FAR uint8_t *regval);
|
||||
static int veml6070_write8(FAR struct veml6070_dev_s *priv,
|
||||
uint8_t regval);
|
||||
|
||||
/* Character driver methods */
|
||||
|
||||
static int veml6070_open(FAR struct file *filep);
|
||||
static int veml6070_close(FAR struct file *filep);
|
||||
static ssize_t veml6070_read(FAR struct file *filep, FAR char *buffer,
|
||||
size_t buflen);
|
||||
static ssize_t veml6070_write(FAR struct file *filep,
|
||||
FAR const char *buffer, size_t buflen);
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
static const struct file_operations g_veml6070_fops =
|
||||
{
|
||||
veml6070_open, /* open */
|
||||
veml6070_close, /* close */
|
||||
veml6070_read, /* read */
|
||||
veml6070_write, /* write */
|
||||
NULL, /* seek */
|
||||
NULL /* ioctl */
|
||||
#ifndef CONFIG_DISABLE_POLL
|
||||
, NULL /* poll */
|
||||
#endif
|
||||
#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS
|
||||
, NULL /* unlink */
|
||||
#endif
|
||||
};
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: veml6070_read8
|
||||
*
|
||||
* Description:
|
||||
* Read 8-bit register
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static int veml6070_read8(FAR struct veml6070_dev_s *priv, int offset,
|
||||
FAR uint8_t *regval)
|
||||
{
|
||||
struct i2c_config_s config;
|
||||
uint8_t data[1];
|
||||
int ret = -1;
|
||||
|
||||
/* Set up the I2C configuration */
|
||||
|
||||
config.frequency = CONFIG_VEML6070_I2C_FREQUENCY;
|
||||
config.address = priv->addr + offset;
|
||||
config.addrlen = 7;
|
||||
|
||||
/* Read 8-bits from the device */
|
||||
|
||||
ret = i2c_read(priv->i2c, &config, data, 1);
|
||||
if (ret < 0)
|
||||
{
|
||||
snerr ("i2c_read failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Copy the content of the buffer to the location of the uint8_t pointer */
|
||||
|
||||
*regval = data[0];
|
||||
|
||||
sninfo("value: %08x ret: %d\n", *regval, ret);
|
||||
return OK;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: veml6070_write8
|
||||
*
|
||||
* Description:
|
||||
* Write from an 8-bit register
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static int veml6070_write8(FAR struct veml6070_dev_s *priv, uint8_t regval)
|
||||
{
|
||||
struct i2c_config_s config;
|
||||
int ret;
|
||||
|
||||
sninfo("value: %02x\n", regval);
|
||||
|
||||
/* Set up the I2C configuration */
|
||||
|
||||
config.frequency = CONFIG_VEML6070_I2C_FREQUENCY;
|
||||
config.address = priv->addr;
|
||||
config.addrlen = 7;
|
||||
|
||||
/* Write 8 bits to device */
|
||||
|
||||
ret = i2c_write(priv->i2c, &config, ®val, 1);
|
||||
if (ret < 0)
|
||||
{
|
||||
snerr("ERROR: i2c_write failed: %d\n", ret);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: veml6070_open
|
||||
*
|
||||
* Description:
|
||||
* This function is called whenever the VEML6070 device is opened.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static int veml6070_open(FAR struct file *filep)
|
||||
{
|
||||
return OK;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: veml6070_close
|
||||
*
|
||||
* Description:
|
||||
* This routine is called when the VEML6070 device is closed.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static int veml6070_close(FAR struct file *filep)
|
||||
{
|
||||
return OK;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: veml6070_read
|
||||
****************************************************************************/
|
||||
|
||||
static ssize_t veml6070_read(FAR struct file *filep, FAR char *buffer,
|
||||
size_t buflen)
|
||||
{
|
||||
int ret;
|
||||
FAR struct inode *inode;
|
||||
FAR struct veml6070_dev_s *priv;
|
||||
int msb = 1;
|
||||
uint16_t regdata;
|
||||
|
||||
DEBUGASSERT(filep);
|
||||
inode = filep->f_inode;
|
||||
|
||||
DEBUGASSERT(inode && inode->i_private);
|
||||
priv = (FAR struct veml6070_dev_s *)inode->i_private;
|
||||
|
||||
/* Check if the user is reading the right size */
|
||||
|
||||
if (buflen != 2)
|
||||
{
|
||||
snerr("ERROR: You need to read 2 bytes from this sensor!\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Enable the sensor */
|
||||
|
||||
ret = veml6070_write8(priv, VEML6070_CMD_RSV & ~VEML6070_CMD_SD);
|
||||
if (ret < 0)
|
||||
{
|
||||
snerr("ERROR: Failed to enable the VEML6070!\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* 1T for Rset 270Kohms is 125ms */
|
||||
|
||||
usleep(125000);
|
||||
|
||||
/* Read the MSB first */
|
||||
|
||||
ret = veml6070_read8(priv, msb, (FAR uint8_t *) ®data);
|
||||
if (ret < 0)
|
||||
{
|
||||
snerr("ERROR: Error reading light sensor!\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
buffer[1] = regdata;
|
||||
|
||||
/* Read the LSB */
|
||||
|
||||
msb = 0;
|
||||
ret = veml6070_read8(priv, msb, (FAR uint8_t *) ®data);
|
||||
if (ret < 0)
|
||||
{
|
||||
snerr("ERROR: Error reading light sensor!\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
buffer[0] = regdata;
|
||||
|
||||
return buflen;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: veml6070_write
|
||||
****************************************************************************/
|
||||
|
||||
static ssize_t veml6070_write(FAR struct file *filep,
|
||||
FAR const char *buffer, size_t buflen)
|
||||
{
|
||||
return -ENOSYS;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: veml6070_register
|
||||
*
|
||||
* Description:
|
||||
* Register the VEML6070 character device as 'devpath'
|
||||
*
|
||||
* Input Parameters:
|
||||
* devpath - The full path to the driver to register. E.g., "/dev/uvlight0"
|
||||
* i2c - An instance of the I2C interface to use to communicate with VEML6070
|
||||
* addr - The I2C address of the VEML6070.
|
||||
*
|
||||
* Returned Value:
|
||||
* Zero (OK) on success; a negated errno value on failure.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
int veml6070_register(FAR const char *devpath, FAR struct i2c_master_s *i2c,
|
||||
uint8_t addr)
|
||||
{
|
||||
int ret;
|
||||
|
||||
/* Sanity check */
|
||||
|
||||
DEBUGASSERT(i2c != NULL);
|
||||
|
||||
/* Initialize the VEML6070 device structure */
|
||||
|
||||
FAR struct veml6070_dev_s *priv =
|
||||
(FAR struct veml6070_dev_s *)kmm_malloc(sizeof(struct veml6070_dev_s));
|
||||
|
||||
if (priv == NULL)
|
||||
{
|
||||
snerr("ERROR: Failed to allocate instance\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
priv->i2c = i2c;
|
||||
priv->addr = addr;
|
||||
|
||||
/* Initialize the device (shut it down) */
|
||||
|
||||
ret = veml6070_write8(priv, VEML6070_CMD_RSV | VEML6070_CMD_SD);
|
||||
if (ret < 0)
|
||||
{
|
||||
snerr("ERROR: Failed to initialize the VEML6070!\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Register the character driver */
|
||||
|
||||
ret = register_driver(devpath, &g_veml6070_fops, 0666, priv);
|
||||
if (ret < 0)
|
||||
{
|
||||
snerr("ERROR: Failed to register driver: %d\n", ret);
|
||||
kmm_free(priv);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
#endif /* CONFIG_I2C && CONFIG_VEML6070 */
|
||||
Reference in New Issue
Block a user