diff --git a/configs/stm32f103-minimum/README.txt b/configs/stm32f103-minimum/README.txt index 145f6af0e42..112182b032c 100644 --- a/configs/stm32f103-minimum/README.txt +++ b/configs/stm32f103-minimum/README.txt @@ -636,3 +636,9 @@ Where is one of the following: CONFIG_CDCACM_CONSOLE=y : The CDC/ACM serial device is NOT the console CONFIG_PL2303=y : The Prolifics PL2303 emulation is enabled CONFIG_PL2303_CONSOLE=y : The PL2303 serial device is the console + + veml6070: + -------- + This is a config example to use the Vishay VEML6070 UV-A sensor. To use this + sensor you need to connect PB6 (I2C1 CLK) to SCL; PB7 (I2C1 SDA) to SDA of + sensor module. I used a GY-VEML6070 module to test this driver. diff --git a/configs/stm32f103-minimum/src/Makefile b/configs/stm32f103-minimum/src/Makefile index 3baf4b64dc5..4ecd9086ae1 100644 --- a/configs/stm32f103-minimum/src/Makefile +++ b/configs/stm32f103-minimum/src/Makefile @@ -73,4 +73,8 @@ ifeq ($(CONFIG_LCD_ST7567),y) CSRCS += stm32_lcd.c endif +ifeq ($(CONFIG_VEML6070),y) +CSRCS += stm32_veml6070.c +endif + include $(TOPDIR)/configs/Board.mk diff --git a/configs/stm32f103-minimum/src/stm32_bringup.c b/configs/stm32f103-minimum/src/stm32_bringup.c index 7c81c59c071..ed1cd3d4156 100644 --- a/configs/stm32f103-minimum/src/stm32_bringup.c +++ b/configs/stm32f103-minimum/src/stm32_bringup.c @@ -163,5 +163,15 @@ int stm32_bringup(void) } #endif +#ifdef CONFIG_VEML6070 + /* Register the UV-A light sensor */ + + ret = stm32_veml6070initialize("/dev/uvlight0"); + if (ret < 0) + { + syslog(LOG_ERR, "ERROR: stm32_veml6070initialize() failed: %d\n", ret); + } +#endif + return ret; } diff --git a/configs/stm32f103-minimum/src/stm32_veml6070.c b/configs/stm32f103-minimum/src/stm32_veml6070.c new file mode 100644 index 00000000000..72c6583bbcb --- /dev/null +++ b/configs/stm32f103-minimum/src/stm32_veml6070.c @@ -0,0 +1,105 @@ +/************************************************************************************ + * configs/stm32f103-minimum/src/stm32_veml6070.c + * + * Copyright (C) 2016 Alan Carvalho de Assis. All rights reserved. + * Author: Alan Carvalho de Assis + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include +#include + +#include +#include + +#include "stm32.h" +#include "stm32_i2c.h" +#include "stm32f103_minimum.h" + +#if defined(CONFIG_I2C) && defined(CONFIG_VEML6070) + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +#define VEML6070_I2C_PORTNO 1 /* On I2C1 */ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: stm32_veml6070initialize + * + * Description: + * Initialize and register the VEML6070 UV-A Light sensor. + * + * Input parameters: + * devpath - The full path to the driver to register. E.g., "/dev/uvlight0" + * + * Returned Value: + * Zero (OK) on success; a negated errno value on failure. + * + ************************************************************************************/ + +int stm32_veml6070initialize(FAR const char *devpath) +{ + FAR struct i2c_master_s *i2c; + int ret; + + sninfo("Initializing VEML6070!\n"); + + /* Initialize I2C */ + + i2c = stm32_i2cbus_initialize(VEML6070_I2C_PORTNO); + + if (!i2c) + { + return -ENODEV; + } + + /* Then register the light sensor */ + + ret = veml6070_register(devpath, i2c, VEML6070_I2C_DATA_LSB_CMD_ADDR); + if (ret < 0) + { + snerr("ERROR: Error registering BM180\n"); + } + + return ret; +} + +#endif /* CONFIG_I2C && CONFIG_VEML6070 && CONFIG_STM32_I2C1 */ diff --git a/configs/stm32f103-minimum/src/stm32f103_minimum.h b/configs/stm32f103-minimum/src/stm32f103_minimum.h index b3d4ff0a919..7b0f69ddf35 100644 --- a/configs/stm32f103-minimum/src/stm32f103_minimum.h +++ b/configs/stm32f103-minimum/src/stm32f103_minimum.h @@ -192,5 +192,18 @@ int stm32_mfrc522initialize(FAR const char *devpath); int stm32_tone_setup(void); #endif +/*********************************************************************************** + * Name: stm32_veml6070initialize + * + * Description: + * Called to configure an I2C and to register VEML6070 for the stm32f103-minimum + * board. + * + ***********************************************************************************/ + +#ifdef CONFIG_VEML6070 +int stm32_veml6070initialize(FAR const char *devpath); +#endif + #endif /* __ASSEMBLY__ */ #endif /* __CONFIGS_STM32F103_MINIMUM_SRC_STM32F103_MINIMUM_H */ diff --git a/configs/stm32f103-minimum/veml6070/Make.defs b/configs/stm32f103-minimum/veml6070/Make.defs new file mode 100644 index 00000000000..c6d573f6ea2 --- /dev/null +++ b/configs/stm32f103-minimum/veml6070/Make.defs @@ -0,0 +1,113 @@ +############################################################################ +# configs/stm32f103-minimum/vem6070/Make.defs +# +# Copyright (C) 2016 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs + +LDSCRIPT = ld.script + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mkwindeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT) + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(CROSSDEV)ar rcs +NM = $(CROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +endif + +ifneq ($(CONFIG_DEBUG_NOOPT),y) + ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef +ARCHWARNINGSXX = -Wall -Wshadow -Wundef +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +ASMEXT = .S +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-nuttx-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe +HOSTLDFLAGS = + diff --git a/configs/stm32f103-minimum/veml6070/defconfig b/configs/stm32f103-minimum/veml6070/defconfig new file mode 100644 index 00000000000..fa44438359d --- /dev/null +++ b/configs/stm32f103-minimum/veml6070/defconfig @@ -0,0 +1,1201 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_DEFAULT_SMALL=y +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +CONFIG_BUILD_FLAT=y +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y +# CONFIG_UBOOT_UIMAGE is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDINT_H is not set +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set +# CONFIG_ARCH_DEBUG_H is not set + +# +# Debug Options +# +CONFIG_DEBUG_ALERT=y +# CONFIG_DEBUG_FEATURES is not set +CONFIG_ARCH_HAVE_STACKCHECK=y +# CONFIG_STACK_COLORATION is not set +CONFIG_ARCH_HAVE_HEAPCHECK=y +# CONFIG_HEAP_COLORATION is not set +# CONFIG_DEBUG_SYMBOLS is not set +CONFIG_ARCH_HAVE_CUSTOMOPT=y +# CONFIG_DEBUG_NOOPT is not set +# CONFIG_DEBUG_CUSTOMOPT is not set +CONFIG_DEBUG_FULLOPT=y + +# +# System Type +# +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_MISOC is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_RENESAS is not set +# CONFIG_ARCH_RISCV is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_XTENSA is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_A1X is not set +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_EFM32 is not set +# CONFIG_ARCH_CHIP_IMX1 is not set +# CONFIG_ARCH_CHIP_IMX6 is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_TIVA is not set +# CONFIG_ARCH_CHIP_LPC11XX is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +# CONFIG_ARCH_CHIP_SAMA5 is not set +# CONFIG_ARCH_CHIP_SAMD is not set +# CONFIG_ARCH_CHIP_SAML is not set +# CONFIG_ARCH_CHIP_SAM34 is not set +# CONFIG_ARCH_CHIP_SAMV7 is not set +CONFIG_ARCH_CHIP_STM32=y +# CONFIG_ARCH_CHIP_STM32F7 is not set +# CONFIG_ARCH_CHIP_STM32L4 is not set +# CONFIG_ARCH_CHIP_STR71X is not set +# CONFIG_ARCH_CHIP_TMS570 is not set +# CONFIG_ARCH_CHIP_MOXART is not set +# CONFIG_ARCH_ARM7TDMI is not set +# CONFIG_ARCH_ARM926EJS is not set +# CONFIG_ARCH_ARM920T is not set +# CONFIG_ARCH_CORTEXM0 is not set +CONFIG_ARCH_CORTEXM3=y +# CONFIG_ARCH_CORTEXM4 is not set +# CONFIG_ARCH_CORTEXM7 is not set +# CONFIG_ARCH_CORTEXA5 is not set +# CONFIG_ARCH_CORTEXA8 is not set +# CONFIG_ARCH_CORTEXA9 is not set +# CONFIG_ARCH_CORTEXR4 is not set +# CONFIG_ARCH_CORTEXR4F is not set +# CONFIG_ARCH_CORTEXR5 is not set +# CONFIG_ARCH_CORTEX5F is not set +# CONFIG_ARCH_CORTEXR7 is not set +# CONFIG_ARCH_CORTEXR7F is not set +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="stm32" +# CONFIG_ARM_TOOLCHAIN_IAR is not set +CONFIG_ARM_TOOLCHAIN_GNU=y +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_CMNVECTOR=y +# CONFIG_ARMV7M_CMNVECTOR is not set +# CONFIG_ARMV7M_LAZYFPU is not set +# CONFIG_ARCH_HAVE_FPU is not set +# CONFIG_ARCH_HAVE_DPFPU is not set +# CONFIG_ARCH_HAVE_TRUSTZONE is not set +CONFIG_ARM_HAVE_MPU_UNIFIED=y +# CONFIG_ARM_MPU is not set +# CONFIG_DEBUG_HARDFAULT is not set + +# +# ARMV7M Configuration Options +# +# CONFIG_ARMV7M_HAVE_ICACHE is not set +# CONFIG_ARMV7M_HAVE_DCACHE is not set +# CONFIG_ARMV7M_HAVE_ITCM is not set +# CONFIG_ARMV7M_HAVE_DTCM is not set +# CONFIG_ARMV7M_TOOLCHAIN_IARL is not set +# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y +CONFIG_ARMV7M_HAVE_STACKCHECK=y +# CONFIG_ARMV7M_STACKCHECK is not set +# CONFIG_ARMV7M_ITMSYSLOG is not set +CONFIG_SERIAL_TERMIOS=y + +# +# STM32 Configuration Options +# +# CONFIG_ARCH_CHIP_STM32L151C6 is not set +# CONFIG_ARCH_CHIP_STM32L151C8 is not set +# CONFIG_ARCH_CHIP_STM32L151CB is not set +# CONFIG_ARCH_CHIP_STM32L151R6 is not set +# CONFIG_ARCH_CHIP_STM32L151R8 is not set +# CONFIG_ARCH_CHIP_STM32L151RB is not set +# CONFIG_ARCH_CHIP_STM32L151V6 is not set +# CONFIG_ARCH_CHIP_STM32L151V8 is not set +# CONFIG_ARCH_CHIP_STM32L151VB is not set +# CONFIG_ARCH_CHIP_STM32L152C6 is not set +# CONFIG_ARCH_CHIP_STM32L152C8 is not set +# CONFIG_ARCH_CHIP_STM32L152CB is not set +# CONFIG_ARCH_CHIP_STM32L152R6 is not set +# CONFIG_ARCH_CHIP_STM32L152R8 is not set +# CONFIG_ARCH_CHIP_STM32L152RB is not set +# CONFIG_ARCH_CHIP_STM32L152V6 is not set +# CONFIG_ARCH_CHIP_STM32L152V8 is not set +# CONFIG_ARCH_CHIP_STM32L152VB is not set +# CONFIG_ARCH_CHIP_STM32L162ZD is not set +# CONFIG_ARCH_CHIP_STM32L162VE is not set +# CONFIG_ARCH_CHIP_STM32F100C8 is not set +# CONFIG_ARCH_CHIP_STM32F100CB is not set +# CONFIG_ARCH_CHIP_STM32F100R8 is not set +# CONFIG_ARCH_CHIP_STM32F100RB is not set +# CONFIG_ARCH_CHIP_STM32F100RC is not set +# CONFIG_ARCH_CHIP_STM32F100RD is not set +# CONFIG_ARCH_CHIP_STM32F100RE is not set +# CONFIG_ARCH_CHIP_STM32F100V8 is not set +# CONFIG_ARCH_CHIP_STM32F100VB is not set +# CONFIG_ARCH_CHIP_STM32F100VC is not set +# CONFIG_ARCH_CHIP_STM32F100VD is not set +# CONFIG_ARCH_CHIP_STM32F100VE is not set +# CONFIG_ARCH_CHIP_STM32F102CB is not set +# CONFIG_ARCH_CHIP_STM32F103T8 is not set +# CONFIG_ARCH_CHIP_STM32F103TB is not set +# CONFIG_ARCH_CHIP_STM32F103C4 is not set +CONFIG_ARCH_CHIP_STM32F103C8=y +# CONFIG_ARCH_CHIP_STM32F103CB is not set +# CONFIG_ARCH_CHIP_STM32F103R8 is not set +# CONFIG_ARCH_CHIP_STM32F103RB is not set +# CONFIG_ARCH_CHIP_STM32F103RC is not set +# CONFIG_ARCH_CHIP_STM32F103RD is not set +# CONFIG_ARCH_CHIP_STM32F103RE is not set +# CONFIG_ARCH_CHIP_STM32F103RG is not set +# CONFIG_ARCH_CHIP_STM32F103V8 is not set +# CONFIG_ARCH_CHIP_STM32F103VB is not set +# CONFIG_ARCH_CHIP_STM32F103VC is not set +# CONFIG_ARCH_CHIP_STM32F103VE is not set +# CONFIG_ARCH_CHIP_STM32F103ZE is not set +# CONFIG_ARCH_CHIP_STM32F105VB is not set +# CONFIG_ARCH_CHIP_STM32F105RB is not set +# CONFIG_ARCH_CHIP_STM32F107VC is not set +# CONFIG_ARCH_CHIP_STM32F205RG is not set +# CONFIG_ARCH_CHIP_STM32F207IG is not set +# CONFIG_ARCH_CHIP_STM32F207ZE is not set +# CONFIG_ARCH_CHIP_STM32F302K6 is not set +# CONFIG_ARCH_CHIP_STM32F302K8 is not set +# CONFIG_ARCH_CHIP_STM32F302CB is not set +# CONFIG_ARCH_CHIP_STM32F302CC is not set +# CONFIG_ARCH_CHIP_STM32F302RB is not set +# CONFIG_ARCH_CHIP_STM32F302RC is not set +# CONFIG_ARCH_CHIP_STM32F302VB is not set +# CONFIG_ARCH_CHIP_STM32F302VC is not set +# CONFIG_ARCH_CHIP_STM32F303K6 is not set +# CONFIG_ARCH_CHIP_STM32F303K8 is not set +# CONFIG_ARCH_CHIP_STM32F303C6 is not set +# CONFIG_ARCH_CHIP_STM32F303C8 is not set +# CONFIG_ARCH_CHIP_STM32F303CB is not set +# CONFIG_ARCH_CHIP_STM32F303CC is not set +# CONFIG_ARCH_CHIP_STM32F303RB is not set +# CONFIG_ARCH_CHIP_STM32F303RC is not set +# CONFIG_ARCH_CHIP_STM32F303RD is not set +# CONFIG_ARCH_CHIP_STM32F303RE is not set +# CONFIG_ARCH_CHIP_STM32F303VB is not set +# CONFIG_ARCH_CHIP_STM32F303VC is not set +# CONFIG_ARCH_CHIP_STM32F372C8 is not set +# CONFIG_ARCH_CHIP_STM32F372R8 is not set +# CONFIG_ARCH_CHIP_STM32F372V8 is not set +# CONFIG_ARCH_CHIP_STM32F372CB is not set +# CONFIG_ARCH_CHIP_STM32F372RB is not set +# CONFIG_ARCH_CHIP_STM32F372VB is not set +# CONFIG_ARCH_CHIP_STM32F372CC is not set +# CONFIG_ARCH_CHIP_STM32F372RC is not set +# CONFIG_ARCH_CHIP_STM32F372VC is not set +# CONFIG_ARCH_CHIP_STM32F373C8 is not set +# CONFIG_ARCH_CHIP_STM32F373R8 is not set +# CONFIG_ARCH_CHIP_STM32F373V8 is not set +# CONFIG_ARCH_CHIP_STM32F373CB is not set +# CONFIG_ARCH_CHIP_STM32F373RB is not set +# CONFIG_ARCH_CHIP_STM32F373VB is not set +# CONFIG_ARCH_CHIP_STM32F373CC is not set +# CONFIG_ARCH_CHIP_STM32F373RC is not set +# CONFIG_ARCH_CHIP_STM32F373VC is not set +# CONFIG_ARCH_CHIP_STM32F401RE is not set +# CONFIG_ARCH_CHIP_STM32F411RE is not set +# CONFIG_ARCH_CHIP_STM32F411VE is not set +# CONFIG_ARCH_CHIP_STM32F405RG is not set +# CONFIG_ARCH_CHIP_STM32F405VG is not set +# CONFIG_ARCH_CHIP_STM32F405ZG is not set +# CONFIG_ARCH_CHIP_STM32F407VE is not set +# CONFIG_ARCH_CHIP_STM32F407VG is not set +# CONFIG_ARCH_CHIP_STM32F407ZE is not set +# CONFIG_ARCH_CHIP_STM32F407ZG is not set +# CONFIG_ARCH_CHIP_STM32F407IE is not set +# CONFIG_ARCH_CHIP_STM32F407IG is not set +# CONFIG_ARCH_CHIP_STM32F427V is not set +# CONFIG_ARCH_CHIP_STM32F427Z is not set +# CONFIG_ARCH_CHIP_STM32F427I is not set +# CONFIG_ARCH_CHIP_STM32F429V is not set +# CONFIG_ARCH_CHIP_STM32F429Z is not set +# CONFIG_ARCH_CHIP_STM32F429I is not set +# CONFIG_ARCH_CHIP_STM32F429B is not set +# CONFIG_ARCH_CHIP_STM32F429N is not set +# CONFIG_ARCH_CHIP_STM32F446M is not set +# CONFIG_ARCH_CHIP_STM32F446R is not set +# CONFIG_ARCH_CHIP_STM32F446V is not set +# CONFIG_ARCH_CHIP_STM32F446Z is not set +# CONFIG_ARCH_CHIP_STM32F469A is not set +# CONFIG_ARCH_CHIP_STM32F469I is not set +# CONFIG_ARCH_CHIP_STM32F469B is not set +# CONFIG_ARCH_CHIP_STM32F469N is not set +CONFIG_STM32_FLASH_CONFIG_DEFAULT=y +# CONFIG_STM32_FLASH_CONFIG_4 is not set +# CONFIG_STM32_FLASH_CONFIG_6 is not set +# CONFIG_STM32_FLASH_CONFIG_8 is not set +# CONFIG_STM32_FLASH_CONFIG_B is not set +# CONFIG_STM32_FLASH_CONFIG_C is not set +# CONFIG_STM32_FLASH_CONFIG_D is not set +# CONFIG_STM32_FLASH_CONFIG_E is not set +# CONFIG_STM32_FLASH_CONFIG_F is not set +# CONFIG_STM32_FLASH_CONFIG_G is not set +# CONFIG_STM32_FLASH_CONFIG_I is not set +# CONFIG_STM32_STM32L15XX is not set +# CONFIG_STM32_ENERGYLITE is not set +CONFIG_STM32_STM32F10XX=y +# CONFIG_STM32_VALUELINE is not set +# CONFIG_STM32_CONNECTIVITYLINE is not set +CONFIG_STM32_PERFORMANCELINE=y +# CONFIG_STM32_USBACCESSLINE is not set +# CONFIG_STM32_HIGHDENSITY is not set +CONFIG_STM32_MEDIUMDENSITY=y +# CONFIG_STM32_LOWDENSITY is not set +# CONFIG_STM32_STM32F20XX is not set +# CONFIG_STM32_STM32F205 is not set +# CONFIG_STM32_STM32F207 is not set +# CONFIG_STM32_STM32F30XX is not set +# CONFIG_STM32_STM32F302 is not set +# CONFIG_STM32_STM32F303 is not set +# CONFIG_STM32_STM32F37XX is not set +# CONFIG_STM32_STM32F40XX is not set +# CONFIG_STM32_STM32F401 is not set +# CONFIG_STM32_STM32F411 is not set +# CONFIG_STM32_STM32F405 is not set +# CONFIG_STM32_STM32F407 is not set +# CONFIG_STM32_STM32F427 is not set +# CONFIG_STM32_STM32F429 is not set +# CONFIG_STM32_STM32F446 is not set +# CONFIG_STM32_STM32F469 is not set +# CONFIG_STM32_DFU is not set + +# +# STM32 Peripheral Support +# +# CONFIG_STM32_HAVE_CCM is not set +CONFIG_STM32_HAVE_USBDEV=y +# CONFIG_STM32_HAVE_OTGFS is not set +# CONFIG_STM32_HAVE_FSMC is not set +# CONFIG_STM32_HAVE_LTDC is not set +CONFIG_STM32_HAVE_USART3=y +CONFIG_STM32_HAVE_UART4=y +CONFIG_STM32_HAVE_UART5=y +# CONFIG_STM32_HAVE_USART6 is not set +# CONFIG_STM32_HAVE_UART7 is not set +# CONFIG_STM32_HAVE_UART8 is not set +CONFIG_STM32_HAVE_TIM1=y +# CONFIG_STM32_HAVE_TIM2 is not set +CONFIG_STM32_HAVE_TIM3=y +CONFIG_STM32_HAVE_TIM4=y +CONFIG_STM32_HAVE_TIM5=y +CONFIG_STM32_HAVE_TIM6=y +CONFIG_STM32_HAVE_TIM7=y +CONFIG_STM32_HAVE_TIM8=y +# CONFIG_STM32_HAVE_TIM9 is not set +# CONFIG_STM32_HAVE_TIM10 is not set +# CONFIG_STM32_HAVE_TIM11 is not set +# CONFIG_STM32_HAVE_TIM12 is not set +# CONFIG_STM32_HAVE_TIM13 is not set +# CONFIG_STM32_HAVE_TIM14 is not set +# CONFIG_STM32_HAVE_TIM15 is not set +# CONFIG_STM32_HAVE_TIM16 is not set +# CONFIG_STM32_HAVE_TIM17 is not set +CONFIG_STM32_HAVE_ADC2=y +CONFIG_STM32_HAVE_ADC3=y +# CONFIG_STM32_HAVE_ADC4 is not set +# CONFIG_STM32_HAVE_ADC1_DMA is not set +# CONFIG_STM32_HAVE_ADC2_DMA is not set +# CONFIG_STM32_HAVE_ADC3_DMA is not set +# CONFIG_STM32_HAVE_ADC4_DMA is not set +# CONFIG_STM32_HAVE_SDADC1 is not set +# CONFIG_STM32_HAVE_SDADC2 is not set +# CONFIG_STM32_HAVE_SDADC3 is not set +# CONFIG_STM32_HAVE_SDADC1_DMA is not set +# CONFIG_STM32_HAVE_SDADC2_DMA is not set +# CONFIG_STM32_HAVE_SDADC3_DMA is not set +CONFIG_STM32_HAVE_CAN1=y +# CONFIG_STM32_HAVE_CAN2 is not set +# CONFIG_STM32_HAVE_DAC1 is not set +# CONFIG_STM32_HAVE_DAC2 is not set +# CONFIG_STM32_HAVE_RNG is not set +# CONFIG_STM32_HAVE_ETHMAC is not set +CONFIG_STM32_HAVE_I2C2=y +# CONFIG_STM32_HAVE_I2C3 is not set +CONFIG_STM32_HAVE_SPI2=y +CONFIG_STM32_HAVE_SPI3=y +# CONFIG_STM32_HAVE_SPI4 is not set +# CONFIG_STM32_HAVE_SPI5 is not set +# CONFIG_STM32_HAVE_SPI6 is not set +# CONFIG_STM32_HAVE_SAIPLL is not set +# CONFIG_STM32_HAVE_I2SPLL is not set +# CONFIG_STM32_ADC1 is not set +# CONFIG_STM32_ADC2 is not set +# CONFIG_STM32_ADC3 is not set +# CONFIG_STM32_BKP is not set +# CONFIG_STM32_CAN1 is not set +# CONFIG_STM32_CRC is not set +# CONFIG_STM32_DMA1 is not set +# CONFIG_STM32_DMA2 is not set +CONFIG_STM32_I2C1=y +# CONFIG_STM32_I2C2 is not set +# CONFIG_STM32_PWR is not set +# CONFIG_STM32_SDIO is not set +# CONFIG_STM32_SPI1 is not set +# CONFIG_STM32_SPI2 is not set +# CONFIG_STM32_SPI3 is not set +# CONFIG_STM32_TIM1 is not set +# CONFIG_STM32_TIM2 is not set +# CONFIG_STM32_TIM3 is not set +# CONFIG_STM32_TIM4 is not set +# CONFIG_STM32_TIM5 is not set +# CONFIG_STM32_TIM6 is not set +# CONFIG_STM32_TIM7 is not set +# CONFIG_STM32_TIM8 is not set +CONFIG_STM32_USART1=y +# CONFIG_STM32_USART2 is not set +# CONFIG_STM32_USART3 is not set +# CONFIG_STM32_UART4 is not set +# CONFIG_STM32_UART5 is not set +# CONFIG_STM32_USB is not set +# CONFIG_STM32_IWDG is not set +# CONFIG_STM32_WWDG is not set +CONFIG_STM32_I2C=y +# CONFIG_STM32_NOEXT_VECTORS is not set + +# +# Alternate Pin Mapping +# +# CONFIG_STM32_I2C1_REMAP is not set +# CONFIG_STM32_USART1_REMAP is not set +# CONFIG_STM32_JTAG_DISABLE is not set +# CONFIG_STM32_JTAG_FULL_ENABLE is not set +# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set +CONFIG_STM32_JTAG_SW_ENABLE=y +CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y +# CONFIG_STM32_FORCEPOWER is not set +# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set + +# +# Timer Configuration +# +# CONFIG_STM32_ONESHOT is not set +# CONFIG_STM32_FREERUN is not set +# CONFIG_STM32_TIM1_CAP is not set +# CONFIG_STM32_TIM3_CAP is not set +# CONFIG_STM32_TIM4_CAP is not set +# CONFIG_STM32_TIM5_CAP is not set +# CONFIG_STM32_TIM8_CAP is not set +CONFIG_STM32_USART=y +CONFIG_STM32_SERIALDRIVER=y + +# +# U[S]ART Configuration +# + +# +# U[S]ART Device Configuration +# +CONFIG_STM32_USART1_SERIALDRIVER=y +# CONFIG_STM32_USART1_1WIREDRIVER is not set +# CONFIG_USART1_RS485 is not set + +# +# Serial Driver Configuration +# +# CONFIG_SERIAL_DISABLE_REORDERING is not set +# CONFIG_STM32_FLOWCONTROL_BROKEN is not set +# CONFIG_STM32_USART_BREAKS is not set +# CONFIG_STM32_USART_SINGLEWIRE is not set + +# +# I2C Configuration +# +CONFIG_STM32_I2C_ALT=y +# CONFIG_STM32_I2C_DYNTIMEO is not set +CONFIG_STM32_I2CTIMEOSEC=0 +CONFIG_STM32_I2CTIMEOMS=500 +CONFIG_STM32_I2CTIMEOTICKS=500 +# CONFIG_STM32_I2C_DUTY16_9 is not set +CONFIG_STM32_HAVE_RTC_COUNTER=y +# CONFIG_STM32_HAVE_RTC_SUBSECONDS is not set + +# +# USB FS Host Configuration +# + +# +# USB HS Host Configuration +# + +# +# USB Host Debug Configuration +# + +# +# USB Device Configuration +# + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_HAVE_IRQPRIO=y +# CONFIG_ARCH_L2CACHE is not set +# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set +# CONFIG_ARCH_HAVE_ADDRENV is not set +# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set +# CONFIG_ARCH_HAVE_MULTICPU is not set +CONFIG_ARCH_HAVE_VFORK=y +# CONFIG_ARCH_HAVE_MMU is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARCH_NAND_HWECC is not set +# CONFIG_ARCH_HAVE_EXTCLK is not set +# CONFIG_ARCH_HAVE_POWEROFF is not set +CONFIG_ARCH_HAVE_RESET=y +# CONFIG_ARCH_USE_MPU is not set +# CONFIG_ARCH_IRQPRIO is not set +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_IDLE_CUSTOM is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=5483 +# CONFIG_ARCH_CALIBRATION is not set + +# +# Interrupt options +# +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 +CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y +# CONFIG_ARCH_HIPRI_INTERRUPT is not set + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Boot Memory Configuration +# +CONFIG_RAM_START=0x20000000 +CONFIG_RAM_SIZE=20480 +# CONFIG_ARCH_HAVE_SDRAM is not set + +# +# Board Selection +# +# CONFIG_ARCH_BOARD_STM32_TINY is not set +CONFIG_ARCH_BOARD_STM32F103_MINIMUM=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="stm32f103-minimum" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +# CONFIG_ARCH_BUTTONS is not set +CONFIG_ARCH_HAVE_IRQBUTTONS=y + +# +# Board-Specific Options +# +# CONFIG_BOARD_CRASHDUMP is not set +CONFIG_LIB_BOARDCTL=y +# CONFIG_BOARDCTL_RESET is not set +# CONFIG_BOARDCTL_UNIQUEID is not set +# CONFIG_BOARDCTL_TSCTEST is not set +# CONFIG_BOARDCTL_ADCTEST is not set +# CONFIG_BOARDCTL_PWMTEST is not set +# CONFIG_BOARDCTL_GRAPHICS is not set +# CONFIG_BOARDCTL_IOCTL is not set + +# +# RTOS Features +# +# CONFIG_DISABLE_OS_API is not set + +# +# Clocks and Timers +# +CONFIG_ARCH_HAVE_TICKLESS=y +# CONFIG_SCHED_TICKLESS is not set +CONFIG_USEC_PER_TICK=10000 +# CONFIG_SYSTEM_TIME64 is not set +# CONFIG_CLOCK_MONOTONIC is not set +CONFIG_ARCH_HAVE_TIMEKEEPING=y +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2011 +CONFIG_START_MONTH=7 +CONFIG_START_DAY=5 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_WDOG_INTRESERVE=0 +CONFIG_PREALLOC_TIMERS=4 + +# +# Tasks and Scheduling +# +# CONFIG_INIT_NONE is not set +CONFIG_INIT_ENTRYPOINT=y +# CONFIG_INIT_FILEPATH is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_RR_INTERVAL=200 +# CONFIG_SCHED_SPORADIC is not set +CONFIG_TASK_NAME_SIZE=0 +CONFIG_MAX_TASKS=16 +# CONFIG_SCHED_HAVE_PARENT is not set +CONFIG_SCHED_WAITPID=y + +# +# Pthread Options +# +# CONFIG_MUTEX_TYPES is not set +CONFIG_NPTHREAD_KEYS=4 + +# +# Performance Monitoring +# +# CONFIG_SCHED_CPULOAD is not set +# CONFIG_SCHED_INSTRUMENTATION is not set + +# +# Files and I/O +# +CONFIG_DEV_CONSOLE=y +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +# CONFIG_PRIORITY_INHERITANCE is not set + +# +# RTOS hooks +# +CONFIG_BOARD_INITIALIZE=y +# CONFIG_BOARD_INITTHREAD is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +# CONFIG_SIG_EVTHREAD is not set + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 +CONFIG_SIG_SIGWORK=17 + +# +# POSIX Message Queue Options +# +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +# CONFIG_MODULE is not set + +# +# Work queue support +# +CONFIG_SCHED_WORKQUEUE=y +CONFIG_SCHED_HPWORK=y +CONFIG_SCHED_HPWORKPRIORITY=192 +CONFIG_SCHED_HPWORKPERIOD=50000 +CONFIG_SCHED_HPWORKSTACKSIZE=2048 +# CONFIG_SCHED_LPWORK is not set + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 +# CONFIG_LIB_SYSCALL is not set + +# +# Device Drivers +# +# CONFIG_DISABLE_POLL is not set +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_DEV_URANDOM is not set +# CONFIG_DEV_LOOP is not set + +# +# Buffering +# +# CONFIG_DRVR_WRITEBUFFER is not set +# CONFIG_DRVR_READAHEAD is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set +# CONFIG_ARCH_HAVE_PWM_MULTICHAN is not set +# CONFIG_PWM is not set +CONFIG_ARCH_HAVE_I2CRESET=y +CONFIG_I2C=y +# CONFIG_I2C_SLAVE is not set +# CONFIG_I2C_POLLED is not set +# CONFIG_I2C_RESET is not set +# CONFIG_I2C_TRACE is not set +# CONFIG_I2C_DRIVER is not set +# CONFIG_SPI is not set +# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set +# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set +CONFIG_ARCH_HAVE_SPI_BITORDER=y +# CONFIG_I2S is not set + +# +# Timer Driver Support +# +# CONFIG_TIMER is not set +# CONFIG_ONESHOT is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_TIMERS_CS2100CP is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_VIDEO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set + +# +# IO Expander/GPIO Support +# +# CONFIG_IOEXPANDER is not set +# CONFIG_DEV_GPIO is not set + +# +# LCD Driver Support +# +# CONFIG_LCD is not set +# CONFIG_SLCD is not set + +# +# LED Support +# +# CONFIG_USERLED is not set +# CONFIG_RGBLED is not set +# CONFIG_PCA9635PW is not set +# CONFIG_NCP5623C is not set +# CONFIG_MMCSD is not set +# CONFIG_MODEM is not set +# CONFIG_MTD is not set +# CONFIG_EEPROM is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +CONFIG_SENSORS=y +# CONFIG_AS5048B is not set +# CONFIG_BH1750FVI is not set +# CONFIG_BMG160 is not set +# CONFIG_BMP180 is not set +# CONFIG_SENSOR_KXTJ9 is not set +# CONFIG_LIS3DSH is not set +# CONFIG_LIS331DL is not set +# CONFIG_SN_LSM9DS1 is not set +# CONFIG_MB7040 is not set +# CONFIG_MLX90393 is not set +# CONFIG_MCP9844 is not set +# CONFIG_MS58XX is not set +CONFIG_MS58XX_VDD=30 +# CONFIG_MPL115A is not set +# CONFIG_SENSORS_ADXL345 is not set +# CONFIG_MAX31855 is not set +# CONFIG_MAX6675 is not set +# CONFIG_LIS3MDL is not set +# CONFIG_LM75 is not set +# CONFIG_LM92 is not set +# CONFIG_QENCODER is not set +CONFIG_VEML6070=y +# CONFIG_XEN1210 is not set +# CONFIG_ZEROCROSS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_SERIAL_REMOVABLE is not set +CONFIG_SERIAL_CONSOLE=y +# CONFIG_16550_UART is not set +# CONFIG_UART_SERIALDRIVER is not set +# CONFIG_UART0_SERIALDRIVER is not set +# CONFIG_UART1_SERIALDRIVER is not set +# CONFIG_UART2_SERIALDRIVER is not set +# CONFIG_UART3_SERIALDRIVER is not set +# CONFIG_UART4_SERIALDRIVER is not set +# CONFIG_UART5_SERIALDRIVER is not set +# CONFIG_UART6_SERIALDRIVER is not set +# CONFIG_UART7_SERIALDRIVER is not set +# CONFIG_UART8_SERIALDRIVER is not set +# CONFIG_SCI0_SERIALDRIVER is not set +# CONFIG_SCI1_SERIALDRIVER is not set +# CONFIG_USART0_SERIALDRIVER is not set +CONFIG_USART1_SERIALDRIVER=y +# CONFIG_USART2_SERIALDRIVER is not set +# CONFIG_USART3_SERIALDRIVER is not set +# CONFIG_USART4_SERIALDRIVER is not set +# CONFIG_USART5_SERIALDRIVER is not set +# CONFIG_USART6_SERIALDRIVER is not set +# CONFIG_USART7_SERIALDRIVER is not set +# CONFIG_USART8_SERIALDRIVER is not set +# CONFIG_OTHER_UART_SERIALDRIVER is not set +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_SERIAL_NPOLLWAITERS=2 +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +# CONFIG_SERIAL_DMA is not set +# CONFIG_SERIAL_TIOCSERGSTRUCT is not set +CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y +CONFIG_USART1_SERIAL_CONSOLE=y +# CONFIG_OTHER_SERIAL_CONSOLE is not set +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# USART1 Configuration +# +CONFIG_USART1_RXBUFSIZE=256 +CONFIG_USART1_TXBUFSIZE=256 +CONFIG_USART1_BAUD=115200 +CONFIG_USART1_BITS=8 +CONFIG_USART1_PARITY=0 +CONFIG_USART1_2STOP=0 +# CONFIG_USART1_IFLOWCONTROL is not set +# CONFIG_USART1_OFLOWCONTROL is not set +# CONFIG_USART1_DMA is not set +# CONFIG_PSEUDOTERM is not set +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_HAVE_USBTRACE is not set +# CONFIG_DRIVERS_WIRELESS is not set +# CONFIG_DRIVERS_CONTACTLESS is not set + +# +# System Logging +# +# CONFIG_ARCH_SYSLOG is not set +# CONFIG_RAMLOG is not set +# CONFIG_SYSLOG_INTBUFFER is not set +# CONFIG_SYSLOG_TIMESTAMP is not set +CONFIG_SYSLOG_SERIAL_CONSOLE=y +# CONFIG_SYSLOG_CHAR is not set +CONFIG_SYSLOG_CONSOLE=y +# CONFIG_SYSLOG_NONE is not set +# CONFIG_SYSLOG_FILE is not set +# CONFIG_SYSLOG_CHARDEV is not set + +# +# Networking Support +# +# CONFIG_ARCH_HAVE_NET is not set +# CONFIG_ARCH_HAVE_PHY is not set +# CONFIG_NET is not set + +# +# Crypto API +# +# CONFIG_CRYPTO is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_AUTOMOUNTER is not set +CONFIG_DISABLE_PSEUDOFS_OPERATIONS=y +# CONFIG_FS_READABLE is not set +# CONFIG_FS_WRITABLE is not set +# CONFIG_FS_NAMED_SEMAPHORES is not set +CONFIG_FS_MQUEUE_MPATH="/var/mqueue" +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_FAT is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_TMPFS is not set +# CONFIG_FS_SMARTFS is not set +# CONFIG_FS_BINFS is not set +# CONFIG_FS_PROCFS is not set +# CONFIG_FS_UNIONFS is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +# CONFIG_ARCH_HAVE_HEAP2 is not set +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Wireless Support +# + +# +# Binary Loader +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +CONFIG_BUILTIN=y +# CONFIG_PIC is not set +CONFIG_SYMTAB_ORDEREDBYNAME=y + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +# CONFIG_LIBC_LONG_LONG is not set +# CONFIG_LIBC_IOCTL_VARIADIC is not set +# CONFIG_LIBC_WCHAR is not set +# CONFIG_LIBC_LOCALE is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +# CONFIG_LIBC_LOCALTIME is not set +# CONFIG_TIME_EXTENDED is not set +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set +CONFIG_ARCH_HAVE_TLS=y +# CONFIG_TLS is not set +# CONFIG_LIBC_NETDB is not set + +# +# Non-standard Library Support +# +# CONFIG_LIB_CRC64_FAST is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set +# CONFIG_LIB_HEX2BIN is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# +CONFIG_BUILTIN_PROXY_STACKSIZE=1024 + +# +# CAN Utilities +# + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CCTYPE is not set +# CONFIG_EXAMPLES_CHAT is not set +# CONFIG_EXAMPLES_CONFIGDATA is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_MEDIA is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTERM is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PCA9635 is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_PPPD is not set +# CONFIG_EXAMPLES_RFID_READUID is not set +# CONFIG_EXAMPLES_RGBLED is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERIALBLASTER is not set +# CONFIG_EXAMPLES_SERIALRX is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_SMART_TEST is not set +# CONFIG_EXAMPLES_SMP is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set +# CONFIG_EXAMPLES_WEBSERVER is not set + +# +# File System Utilities +# +# CONFIG_FSUTILS_INIFILE is not set + +# +# GPS Utilities +# +# CONFIG_GPSUTILS_MINMEA_LIB is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set +# CONFIG_GRAPHICS_TRAVELER is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_MICROPYTHON is not set +# CONFIG_INTERPRETERS_MINIBASIC is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# Network Utilities +# +# CONFIG_NETUTILS_CHAT is not set +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_ESP8266 is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_SMTP is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y +# CONFIG_NSH_MOTD is not set + +# +# Command Line Configuration +# +CONFIG_NSH_READLINE=y +# CONFIG_NSH_CLE is not set +CONFIG_NSH_LINELEN=80 +CONFIG_NSH_DISABLE_SEMICOLON=y +# CONFIG_NSH_CMDPARMS is not set +CONFIG_NSH_MAXARGUMENTS=6 +# CONFIG_NSH_ARGCAT is not set +CONFIG_NSH_NESTDEPTH=3 +CONFIG_NSH_DISABLEBG=y +CONFIG_NSH_BUILTIN_APPS=y + +# +# Disable Individual commands +# +CONFIG_NSH_DISABLE_ADDROUTE=y +CONFIG_NSH_DISABLE_BASENAME=y +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +CONFIG_NSH_DISABLE_CMP=y +CONFIG_NSH_DISABLE_DATE=y +# CONFIG_NSH_DISABLE_DD is not set +CONFIG_NSH_DISABLE_DF=y +CONFIG_NSH_DISABLE_DELROUTE=y +CONFIG_NSH_DISABLE_DIRNAME=y +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +CONFIG_NSH_DISABLE_IFCONFIG=y +CONFIG_NSH_DISABLE_IFUPDOWN=y +# CONFIG_NSH_DISABLE_KILL is not set +CONFIG_NSH_DISABLE_LOSETUP=y +CONFIG_NSH_DISABLE_LOSMART=y +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MV is not set +# CONFIG_NSH_DISABLE_MW is not set +CONFIG_NSH_DISABLE_PRINTF=y +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +CONFIG_NSH_DISABLE_TIME=y +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +CONFIG_NSH_DISABLE_UNAME=y +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set +CONFIG_NSH_MMCSDMINOR=0 + +# +# Configure Command Options +# +CONFIG_NSH_CODECS_BUFSIZE=128 +# CONFIG_NSH_CMDOPT_HEXDUMP is not set +CONFIG_NSH_FILEIOSIZE=1024 + +# +# Scripting Support +# +# CONFIG_NSH_DISABLESCRIPT is not set +CONFIG_NSH_DISABLE_ITEF=y +CONFIG_NSH_DISABLE_LOOPS=y + +# +# Console Configuration +# +CONFIG_NSH_CONSOLE=y +# CONFIG_NSH_ALTCONDEV is not set +CONFIG_NSH_ARCHINIT=y +# CONFIG_NSH_LOGIN is not set +# CONFIG_NSH_CONSOLE_LOGIN is not set + +# +# NxWidgets/NxWM +# + +# +# Platform-specific Support +# +# CONFIG_PLATFORM_CONFIGDATA is not set + +# +# System Libraries and NSH Add-Ons +# +# CONFIG_SYSTEM_CLE is not set +# CONFIG_SYSTEM_CUTERM is not set +# CONFIG_SYSTEM_FREE is not set +# CONFIG_SYSTEM_HEX2BIN is not set +# CONFIG_SYSTEM_HEXED is not set +# CONFIG_SYSTEM_I2CTOOL is not set +# CONFIG_SYSTEM_INSTALL is not set +# CONFIG_SYSTEM_RAMTEST is not set +CONFIG_READLINE_HAVE_EXTMATCH=y +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y +# CONFIG_READLINE_TABCOMPLETION is not set +# CONFIG_READLINE_CMD_HISTORY is not set +# CONFIG_SYSTEM_SUDOKU is not set +# CONFIG_SYSTEM_SYSTEM is not set +# CONFIG_SYSTEM_TEE is not set +# CONFIG_SYSTEM_UBLOXMODEM is not set +# CONFIG_SYSTEM_VI is not set +# CONFIG_SYSTEM_ZMODEM is not set diff --git a/configs/stm32f103-minimum/veml6070/setenv.sh b/configs/stm32f103-minimum/veml6070/setenv.sh new file mode 100644 index 00000000000..efcbfee1429 --- /dev/null +++ b/configs/stm32f103-minimum/veml6070/setenv.sh @@ -0,0 +1,100 @@ +#!/bin/bash +# configs//stm32f103-minimum/veml6070/setenv.sh +# +# Copyright (C) 2016 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# This is the Cygwin path to the location where I installed the CodeSourcery +# toolchain under windows. You will also have to edit this if you install +# the CodeSourcery toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" +# export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" + +# This is the location where I installed the ARM "GNU Tools for ARM Embedded Processors" +# You can this free toolchain here https://launchpad.net/gcc-arm-embedded +export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/GNU Tools ARM Embedded/4.9 2015q2/bin" + +# This is the path to the location where I installed the devkitARM toolchain +# You can get this free toolchain from http://devkitpro.org/ or http://sourceforge.net/projects/devkitpro/ +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/devkitARM/bin" + +# This is the Cygwin path to the location where I build the buildroot +# toolchain. +# export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" + +# Add the path to the toolchain to the PATH varialble +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" diff --git a/drivers/sensors/Kconfig b/drivers/sensors/Kconfig index 3b852a1cd43..d43362eb6cb 100644 --- a/drivers/sensors/Kconfig +++ b/drivers/sensors/Kconfig @@ -234,6 +234,13 @@ config QENCODER bool "Qencoder" default n +config VEML6070 + bool "Vishay VEML6070 UV-A Light Sensor support" + default n + select I2C + ---help--- + Enable driver support for the Vishay VEML6070 UV-A light sensor. + config XEN1210 bool "Sensixs XEN1210 Magnetometer" default n diff --git a/drivers/sensors/Make.defs b/drivers/sensors/Make.defs index 9c2bce29e84..4a215042811 100644 --- a/drivers/sensors/Make.defs +++ b/drivers/sensors/Make.defs @@ -138,6 +138,12 @@ ifeq ($(CONFIG_QENCODER),y) CSRCS += qencoder.c endif +# Vishay VEML6070 + +ifeq ($(CONFIG_VEML6070),y) + CSRCS += veml6070.c +endif + # Sensixs XEN1210 ifeq ($(CONFIG_XEN1210),y) diff --git a/drivers/sensors/veml6070.c b/drivers/sensors/veml6070.c new file mode 100644 index 00000000000..28030ba7ced --- /dev/null +++ b/drivers/sensors/veml6070.c @@ -0,0 +1,352 @@ +/**************************************************************************** + * drivers/sensors/veml6070.c + * Character driver for the Vishay UV-A Light Sensor VEML6070 + * + * Copyright (C) 2016 Alan Carvalho de Assis. All rights reserved. + * Author: Alan Carvalho de Assis + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include +#include +#include + +#include +#include +#include +#include + +#if defined(CONFIG_I2C) && defined(CONFIG_VEML6070) + +/**************************************************************************** + * Pre-process Definitions + ****************************************************************************/ + +#ifndef CONFIG_VEML6070_I2C_FREQUENCY +# define CONFIG_VEML6070_I2C_FREQUENCY 100000 +#endif + +/**************************************************************************** + * Private Types + ****************************************************************************/ + +struct veml6070_dev_s +{ + FAR struct i2c_master_s *i2c; /* I2C interface */ + uint8_t addr; /* I2C address */ +}; + +/**************************************************************************** + * Private Function Prototypes + ****************************************************************************/ + +/* I2C Helpers */ + +static int veml6070_read8(FAR struct veml6070_dev_s *priv, int offset, + FAR uint8_t *regval); +static int veml6070_write8(FAR struct veml6070_dev_s *priv, + uint8_t regval); + +/* Character driver methods */ + +static int veml6070_open(FAR struct file *filep); +static int veml6070_close(FAR struct file *filep); +static ssize_t veml6070_read(FAR struct file *filep, FAR char *buffer, + size_t buflen); +static ssize_t veml6070_write(FAR struct file *filep, + FAR const char *buffer, size_t buflen); + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +static const struct file_operations g_veml6070_fops = +{ + veml6070_open, /* open */ + veml6070_close, /* close */ + veml6070_read, /* read */ + veml6070_write, /* write */ + NULL, /* seek */ + NULL /* ioctl */ +#ifndef CONFIG_DISABLE_POLL + , NULL /* poll */ +#endif +#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS + , NULL /* unlink */ +#endif +}; + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: veml6070_read8 + * + * Description: + * Read 8-bit register + * + ****************************************************************************/ + +static int veml6070_read8(FAR struct veml6070_dev_s *priv, int offset, + FAR uint8_t *regval) +{ + struct i2c_config_s config; + uint8_t data[1]; + int ret = -1; + + /* Set up the I2C configuration */ + + config.frequency = CONFIG_VEML6070_I2C_FREQUENCY; + config.address = priv->addr + offset; + config.addrlen = 7; + + /* Read 8-bits from the device */ + + ret = i2c_read(priv->i2c, &config, data, 1); + if (ret < 0) + { + snerr ("i2c_read failed: %d\n", ret); + return ret; + } + + /* Copy the content of the buffer to the location of the uint8_t pointer */ + + *regval = data[0]; + + sninfo("value: %08x ret: %d\n", *regval, ret); + return OK; +} + +/**************************************************************************** + * Name: veml6070_write8 + * + * Description: + * Write from an 8-bit register + * + ****************************************************************************/ + +static int veml6070_write8(FAR struct veml6070_dev_s *priv, uint8_t regval) +{ + struct i2c_config_s config; + int ret; + + sninfo("value: %02x\n", regval); + + /* Set up the I2C configuration */ + + config.frequency = CONFIG_VEML6070_I2C_FREQUENCY; + config.address = priv->addr; + config.addrlen = 7; + + /* Write 8 bits to device */ + + ret = i2c_write(priv->i2c, &config, ®val, 1); + if (ret < 0) + { + snerr("ERROR: i2c_write failed: %d\n", ret); + } + + return ret; +} + +/**************************************************************************** + * Name: veml6070_open + * + * Description: + * This function is called whenever the VEML6070 device is opened. + * + ****************************************************************************/ + +static int veml6070_open(FAR struct file *filep) +{ + return OK; +} + +/**************************************************************************** + * Name: veml6070_close + * + * Description: + * This routine is called when the VEML6070 device is closed. + * + ****************************************************************************/ + +static int veml6070_close(FAR struct file *filep) +{ + return OK; +} + +/**************************************************************************** + * Name: veml6070_read + ****************************************************************************/ + +static ssize_t veml6070_read(FAR struct file *filep, FAR char *buffer, + size_t buflen) +{ + int ret; + FAR struct inode *inode; + FAR struct veml6070_dev_s *priv; + int msb = 1; + uint16_t regdata; + + DEBUGASSERT(filep); + inode = filep->f_inode; + + DEBUGASSERT(inode && inode->i_private); + priv = (FAR struct veml6070_dev_s *)inode->i_private; + + /* Check if the user is reading the right size */ + + if (buflen != 2) + { + snerr("ERROR: You need to read 2 bytes from this sensor!\n"); + return -EINVAL; + } + + /* Enable the sensor */ + + ret = veml6070_write8(priv, VEML6070_CMD_RSV & ~VEML6070_CMD_SD); + if (ret < 0) + { + snerr("ERROR: Failed to enable the VEML6070!\n"); + return -EINVAL; + } + + /* 1T for Rset 270Kohms is 125ms */ + + usleep(125000); + + /* Read the MSB first */ + + ret = veml6070_read8(priv, msb, (FAR uint8_t *) ®data); + if (ret < 0) + { + snerr("ERROR: Error reading light sensor!\n"); + return ret; + } + + buffer[1] = regdata; + + /* Read the LSB */ + + msb = 0; + ret = veml6070_read8(priv, msb, (FAR uint8_t *) ®data); + if (ret < 0) + { + snerr("ERROR: Error reading light sensor!\n"); + return ret; + } + + buffer[0] = regdata; + + return buflen; +} + +/**************************************************************************** + * Name: veml6070_write + ****************************************************************************/ + +static ssize_t veml6070_write(FAR struct file *filep, + FAR const char *buffer, size_t buflen) +{ + return -ENOSYS; +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: veml6070_register + * + * Description: + * Register the VEML6070 character device as 'devpath' + * + * Input Parameters: + * devpath - The full path to the driver to register. E.g., "/dev/uvlight0" + * i2c - An instance of the I2C interface to use to communicate with VEML6070 + * addr - The I2C address of the VEML6070. + * + * Returned Value: + * Zero (OK) on success; a negated errno value on failure. + * + ****************************************************************************/ + +int veml6070_register(FAR const char *devpath, FAR struct i2c_master_s *i2c, + uint8_t addr) +{ + int ret; + + /* Sanity check */ + + DEBUGASSERT(i2c != NULL); + + /* Initialize the VEML6070 device structure */ + + FAR struct veml6070_dev_s *priv = + (FAR struct veml6070_dev_s *)kmm_malloc(sizeof(struct veml6070_dev_s)); + + if (priv == NULL) + { + snerr("ERROR: Failed to allocate instance\n"); + return -ENOMEM; + } + + priv->i2c = i2c; + priv->addr = addr; + + /* Initialize the device (shut it down) */ + + ret = veml6070_write8(priv, VEML6070_CMD_RSV | VEML6070_CMD_SD); + if (ret < 0) + { + snerr("ERROR: Failed to initialize the VEML6070!\n"); + return ret; + } + + /* Register the character driver */ + + ret = register_driver(devpath, &g_veml6070_fops, 0666, priv); + if (ret < 0) + { + snerr("ERROR: Failed to register driver: %d\n", ret); + kmm_free(priv); + } + + return ret; +} + +#endif /* CONFIG_I2C && CONFIG_VEML6070 */ diff --git a/include/nuttx/sensors/veml6070.h b/include/nuttx/sensors/veml6070.h new file mode 100644 index 00000000000..a143f1ee8d2 --- /dev/null +++ b/include/nuttx/sensors/veml6070.h @@ -0,0 +1,121 @@ +/**************************************************************************** + * include/nuttx/input/veml6070.h + * + * Copyright (C) 2015-2016 Gregory Nutt. All rights reserved. + * Copyright (C) 2016 Alan Carvalho de Assis. All rights reserved. + * Author: Alan Carvalho de Assis + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#ifndef __INCLUDE_NUTTX_SENSORS_VEML6070_H +#define __INCLUDE_NUTTX_SENSORS_VEML6070_H + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include +#include +#include + +#if defined(CONFIG_VEML6070) + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* Device I2C Address */ + +#define VEML6070_I2C_DATA_LSB_CMD_ADDR 0x38 +#define VEML6070_I2C_DATA_MSB_ADDR 0x39 + +/* Command Register Format + * Bits: + * 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | + * RSV | RSV | ACK | ACK_THD | IT1 | IT0 | RSV | SD | + * + * NOTE: The RSV Bit 1 needs to be always 1 + */ + + +#define VEML6070_CMD_SD 0x01 /* Shutdown command */ +#define VEML6070_CMD_RSV 0x02 +#define VEML6070_CMD_IT_0_5T 0x00 /* IT1=0 : IT0=0 */ +#define VEML6070_CMD_IT_1T 0x04 /* IT1=0 : IT0=1 */ +#define VEML6070_CMD_IT_2T 0x08 /* IT1=1 : IT0=0 */ +#define VEML6070_CMD_IT_4T 0x0c /* IT1=1 : IT0=1 */ +#define VEML6070_CMD_ACK_THD 0x10 /* Acknowledge thresold: + 0 = 102 steps + 1 = 145 steps */ +#define VEML6070_CMD_ACK 0x20 /* Acknowledge activity */ + +/**************************************************************************** + * Public Types + ****************************************************************************/ + +/**************************************************************************** + * Public Function Prototypes + ****************************************************************************/ + +#ifdef __cplusplus +#define EXTERN extern "C" +extern "C" +{ +#else +#define EXTERN extern +#endif + +/**************************************************************************** + * Name: veml6070_register + * + * Description: + * Register the VEML6070 character device as 'devpath' + * + * Input Parameters: + * devpath - The full path to the driver to register. E.g., "/dev/uvlight0" + * i2c - An instance of the I2C interface to use to communicate with + * VEML6070 + * addr - The I2C address of the VEML6070. + * + * Returned Value: + * Zero (OK) on success; a negated errno value on failure. + * + ****************************************************************************/ + +int veml6070_register(FAR const char *devpath, FAR struct i2c_master_s *i2c, + uint8_t addr); + +#undef EXTERN +#ifdef __cplusplus +} +#endif + +#endif /* CONFIG_VEML6070 */ +#endif /* __INCLUDE_NUTTX_SENSORS_VEML6070_H */