Mirrors_Framework/nuttx
1
0
Fork 0
mirror of https://github.com/apache/nuttx.git synced 2026-06-05 07:12:54 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

Olimex STM32 P407: Add support for on-board microSD slot. Does not work... Currently all commands to the SD card timeout.

Browse Source
This commit is contained in:
Gregory Nutt
2017-01-28 10:17:10 -06:00
parent db77807ad2
commit a2150c1e35
5 changed files with 193 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files
configs/olimex-stm32-p407/README.txt
+78 -2
View File
@@ -7,8 +7,8 @@ to share the same board design. Other code comes from the STM3240G board
support (which has the same crystal and clocking) and from the STM32 F4
Discovery (which has the same STM32 part)
Peripherals
===========
Board Support
=============
The following peripherals are available in this configuration.
@@ -31,6 +31,82 @@ The following peripherals are available in this configuration.
- Ethernet: Ping to other station on the network works.
microSD Card Interface
======================
microSD Connector
-----------------
----------------- ----------------- ------------------------
SD/MMC CONNECTOR BOARD GPIO CONFIGURATION(s
PIN SIGNAL SIGNAL (no remapping)
--- ------------- ----------------- -------------------------
1 DAT2/RES SD_D2/USART3_TX/ PC10 GPIO_SDIO_D2
SPI3_SCK
2 CD/DAT3/CS SD_D3/USART3_RX/ PC11 GPIO_SDIO_D3
SPI3_MISO
3 CMD/DI SD_CMD PD2 GPIO_SDIO_CMD
4 VDD N/A N/A
5 CLK/SCLK SD_CLK/SPI3_MOSI PC12 GPIO_SDIO_CK
6 VSS N/A N/A
7 DAT0/D0 SD_D0/DCMI_D2 PC8 GPIO_SDIO_D0
8 DAT1/RES SD_D1/DCMI_D3 PC9 GPIO_SDIO_D1
--- ------------- ----------------- -------------------------
NOTES:
1. DAT4, DAT4, DAT6, and DAT7 not connected.
2. There are no alternative pin selections.
3. There is no card detect (CD) GPIO input so we will not
sense if there is a card in the SD slot or not. This will
make usage very awkward.
Configuration
-------------
Enabling SDIO-based MMC/SD support:
System Type->STM32 Peripheral Support
CONFIG_STM32_SDIO=y : Enable SDIO support
CONFIG_STM32_DMA2=y : DMA2 is needed by the driver
Device Drivers -> MMC/SD Driver Support
CONFIG_MMCSD=y : Enable MMC/SD support
CONFIG_MMSCD_NSLOTS=1 : One slot per driver instance
# CONFIG_MMCSD_HAVECARDDETECT is not set : No card-detect GPIO
# CONFIG_MMCSD_MMCSUPPORT is not set : Interferes with some SD cards
# CONFIG_MMCSD_SPI is not set : No SPI-based MMC/SD support
CONFIG_MMCSD_SDIO=y : SDIO-based MMC/SD support
CONFIG_MMCSD_MULTIBLOCK_DISABLE=y : Disable to keep things simple
CONFIG_SDIO_DMA=y : Use SDIO DMA
# CONFIG_SDIO_BLOCKSETUP is not set : (not implemented)
Library Routines
CONFIG_SCHED_WORKQUEUE=y : Driver needs work queue support
Application Configuration -> NSH Library
CONFIG_NSH_ARCHINIT=y : NSH board-initialization
Using the SD card
-----------------
1. Since there is no CD GPIO pin, the firmware sill not know if there is
a card in the SD slot or not. It will assume that there is and attempt
to mount the SD card on power-up. If there is no SD card in the card
slot, there will be a long delay during initialization as the firmware
attempts to query the non-existent card, timeout, and retry.
2. After booting, an SDIO device will appear as /dev/mmcsd0
3. If you try mounting an SD card with nothing in the slot, the
mount will fail:
nsh> mount -t vfat /dev/mmcsd0 /mnt/sdcard
nsh: mount: mount failed: 19
STATUS:
-------
2017-01-28: There is no card communication. All commands to the SD card timeout.
Configurations
==============
configs/olimex-stm32-p407/include/board.h
+38 -1
View File
@@ -1,7 +1,7 @@
/************************************************************************************
* configs/olimex-stm32-p407/include/board.h
*
* Copyright (C) 2009, 2012, 2016 Gregory Nutt. All rights reserved.
* Copyright (C) 2016-2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@@ -240,6 +240,32 @@
#define GPIO_CAN1_RX GPIO_CAN1_RX_2 /* PB8 */
#define GPIO_CAN1_TX GPIO_CAN1_TX_2 /* PB9 */
/* microSD Connector:
*
* ----------------- ----------------- ------------------------
* SD/MMC CONNECTOR BOARD GPIO CONFIGURATION(s
* PIN SIGNAL SIGNAL (no remapping)
* --- ------------- ----------------- -------------------------
* 1 DAT2/RES SD_D2/USART3_TX/ PC10 GPIO_SDIO_D2
* SPI3_SCK
* 2 CD/DAT3/CS SD_D3/USART3_RX/ PC11 GPIO_SDIO_D3
* SPI3_MISO
* 3 CMD/DI SD_CMD PD2 GPIO_SDIO_CMD
* 4 VDD N/A N/A
* 5 CLK/SCLK SD_CLK/SPI3_MOSI PC12 GPIO_SDIO_CK
* 6 VSS N/A N/A
* 7 DAT0/D0 SD_D0/DCMI_D2 PC8 GPIO_SDIO_D0
* 8 DAT1/RES SD_D1/DCMI_D3 PC9 GPIO_SDIO_D1
* --- ------------- ----------------- -------------------------
*
* NOTES:
* 1. DAT4, DAT4, DAT6, and DAT7 not connected.
* 2. There are no alternative pin selections.
* 3. There is no card detect (CD) GPIO input so we will not
* sense if there is a card in the SD slot or not. This will
* make usage very awkward.
*/
/* Ethernet:
*
* - PA2 is ETH_MDIO
@@ -276,6 +302,17 @@
#define GPIO_ETH_RMII_TXD0 GPIO_ETH_RMII_TXD0_2
#define GPIO_ETH_RMII_TXD1 GPIO_ETH_RMII_TXD1_2
/* DMA Channel/Stream Selections ****************************************************/
/* Stream selections are arbitrary for now but might become important in the future
* if we set aside more DMA channels/streams.
*
* SDIO DMA
* DMAMAP_SDIO_1 = Channel 4, Stream 3
* DMAMAP_SDIO_2 = Channel 4, Stream 6
*/
#define DMAMAP_SDIO DMAMAP_SDIO_1
/************************************************************************************
* Public Data
************************************************************************************/
configs/olimex-stm32-p407/src/olimex-stm32-p407.h
+39 -1
View File
@@ -1,7 +1,7 @@
/****************************************************************************
* configs/olimex-stm32-p107/src/olimex-stm32-p407.h
*
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
* Copyright (C) 2016-2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Derives from a file of a similar name for the Olimex STM32 P207:
@@ -55,10 +55,48 @@
/* Configuration ************************************************************/
/* Assume that we support everything until convinced otherwise */
#define HAVE_MMCSD 1
#define HAVE_USBDEV 1
#define HAVE_USBHOST 1
#define HAVE_USBMONITOR 1
/* Can't support MMC/SD features if mountpoints are disabled or if SDIO support
* is not enabled.
*/
#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_STM32_SDIO) || \
!defined(CONFIG_MMCSD_SDIO)
# undef HAVE_MMCSD
#endif
/* Default MMC/SD minor number */
#ifdef HAVE_MMCSD
/* Default MMC/SD SLOT number */
# if defined(CONFIG_NSH_MMCSDSLOTNO) && CONFIG_NSH_MMCSDSLOTNO != 0
# error Only one MMC/SD slot
# undef CONFIG_NSH_MMCSDSLOTNO
# endif
# ifdef CONFIG_NSH_MMCSDSLOTNO
# define MMCSD_SLOTNO CONFIG_NSH_MMCSDSLOTNO
# else
# define MMCSD_SLOTNO 0
# endif
/* Default minor device number */
# ifdef CONFIG_NSH_MMCSDMINOR
# define MMCSD_MINOR CONFIG_NSH_MMCSDMINOR
# else
# define MMCSD_MINOR 0
# endif
#endif
/* Can't support USB host or device features if USB OTG FS is not enabled */
#ifndef CONFIG_STM32_OTGFS
configs/olimex-stm32-p407/src/stm32_bringup.c
+37 -1
View File
@@ -1,7 +1,7 @@
/****************************************************************************
* config/olimex-stm32-p407/src/stm32_bringup.c
*
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
* Copyright (C) 2016-2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@@ -46,6 +46,7 @@
#include <errno.h>
#include <nuttx/board.h>
#include <nuttx/mmcsd.h>
#ifdef CONFIG_USBMONITOR
# include <nuttx/usb/usbmonitor.h>
@@ -78,6 +79,9 @@
int stm32_bringup(void)
{
#ifdef HAVE_MMCSD
FAR struct sdio_dev_s *sdio;
#endif
int ret;
#ifdef CONFIG_FS_PROCFS
@@ -90,6 +94,38 @@ int stm32_bringup(void)
}
#endif
#ifdef HAVE_MMCSD
/* Mount the SDIO-based MMC/SD block driver */
/* First, get an instance of the SDIO interface */
sdio = sdio_initialize(MMCSD_SLOTNO);
if (!sdio)
{
syslog(LOG_ERR,
"ERROR: Failed to initialize SDIO slot %d\n",
MMCSD_SLOTNO);
return -ENODEV;
}
/* Now bind the SDIO interface to the MMC/SD driver */
ret = mmcsd_slotinitialize(MMCSD_MINOR, sdio);
if (ret != OK)
{
syslog(LOG_ERR,
"ERROR: Failed to bind SDIO to the MMC/SD driver: %d\n",
ret);
return ret;
}
/* Then let's guess and say that there is a card in the slot. The Olimex
* STM32 P407 does not support a GPIO to detect if there is a card in
* the slot so we are reduced to guessing.
*/
sdio_mediachange(sdio, true);
#endif
#ifdef CONFIG_CAN
/* Initialize CAN and register the CAN driver. */
configs/stm3240g-eval/src/stm32_appinit.c
+1 -2
View File
@@ -297,9 +297,8 @@ int board_app_initialize(uintptr_t arg)
#warning "Now what are we going to do with this SPI FLASH driver?"
#endif
/* Mount the SDIO-based MMC/SD block driver */
#ifdef HAVE_MMCSD
/* Mount the SDIO-based MMC/SD block driver */
/* First, get an instance of the SDIO interface */
sdio = sdio_initialize(CONFIG_NSH_MMCSDSLOTNO);