Mirrors_Framework/nuttx
1
0
Fork 0
mirror of https://github.com/apache/nuttx.git synced 2026-05-20 20:44:39 +08:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity

espressif/rmt: Fix minor issues regarding formatting and comments

Browse Source 
This commit only fix minor issues regarding formatting and comments
This commit is contained in:
Tiago Medicci Serrano
2024-03-25 16:53:35 -03:00
committed by Alan Carvalho de Assis
parent 5ba40d083a
commit 9520edeb16
20 changed files with 118 additions and 124 deletions
Download Patch File Download Diff File Expand all files Collapse all files
arch/risc-v/src/common/espressif/esp_rmt.c
+26 -30
View File
@@ -222,7 +222,7 @@ struct rmt_dev_common_s
struct rmt_dev_lowerhalf_s
{
/* The following block is part of the upper-hald device struct */
/* The following block is part of the upper-half device struct */
FAR const struct rmt_ops_s *ops;
FAR struct circbuf_s *circbuf;
@@ -241,18 +241,18 @@ struct rmt_obj_s
size_t tx_len_rem;
size_t tx_sub_len;
bool wait_done; /* Mark whether wait tx done */
bool loop_autostop; /* mark whether loop auto-stop is enabled */
bool loop_autostop; /* Mark whether loop auto-stop is enabled */
rmt_channel_t channel;
const rmt_item32_t *tx_data;
sem_t tx_sem;
#if CONFIG_SPIRAM_USE_MALLOC
#ifdef CONFIG_SPIRAM_USE_MALLOC
int intr_alloc_flags;
sem_t tx_sem_buffer;
#endif
rmt_item32_t *tx_buf;
struct circbuf_s rx_buf;
sem_t rx_sem;
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
rmt_item32_t *rx_item_buf;
uint32_t rx_item_buf_size;
uint32_t rx_item_len;
@@ -433,7 +433,7 @@ static void rmt_module_enable(void)
*
****************************************************************************/
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
static int rmt_set_rx_thr_intr_en(rmt_channel_t channel, bool en,
uint16_t evt_thresh)
{
@@ -496,7 +496,7 @@ static int rmt_rx_start(rmt_channel_t channel, bool rx_idx_rst)
{
irqstate_t flags;
rmt_channel_t ch = RMT_DECODE_RX_CHANNEL(channel);
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
const uint32_t item_block_len =
rmt_ll_rx_get_mem_blocks(g_rmtdev_common.hal.regs, ch) *
RMT_MEM_ITEM_NUM;
@@ -517,7 +517,7 @@ static int rmt_rx_start(rmt_channel_t channel, bool rx_idx_rst)
rmt_ll_enable_interrupt(g_rmtdev_common.hal.regs,
RMT_LL_EVENT_RX_DONE(ch), true);
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
p_rmt_obj[channel]->rx_item_start_idx = 0;
p_rmt_obj[channel]->rx_item_len = 0;
rmt_set_rx_thr_intr_en(channel, true, item_block_len / 2);
@@ -560,7 +560,7 @@ static int rmt_tx_start(rmt_channel_t channel, bool tx_idx_rst)
rmt_ll_clear_interrupt_status(g_rmtdev_common.hal.regs,
RMT_LL_EVENT_TX_DONE(channel));
/* enable tx end interrupt in non-loop mode */
/* Enable tx end interrupt in non-loop mode */
if (!rmt_ll_tx_is_loop_enabled(g_rmtdev_common.hal.regs, channel))
{
@@ -938,7 +938,7 @@ static int rmt_internal_config(rmt_dev_t *dev,
rmt_ll_rx_enable_filter(dev, RMT_DECODE_RX_CHANNEL(channel),
rmt_param->rx_config.filter_en);
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
/* always enable rx ping-pong */
@@ -1232,7 +1232,7 @@ static int IRAM_ATTR rmt_driver_isr_default(int irq, void *context,
addr = (rmt_item32_t *)
RMTMEM.chan[RMT_ENCODE_RX_CHANNEL(channel)].data32;
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
if (item_len > p_rmt->rx_item_start_idx)
{
item_len = item_len - p_rmt->rx_item_start_idx;
@@ -1272,7 +1272,7 @@ static int IRAM_ATTR rmt_driver_isr_default(int irq, void *context,
rmterr("RMT RX BUFFER ERROR");
}
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
p_rmt->rx_item_start_idx = 0;
p_rmt->rx_item_len = 0;
memset((void *)p_rmt->rx_item_buf, 0, p_rmt->rx_item_buf_size);
@@ -1287,7 +1287,7 @@ static int IRAM_ATTR rmt_driver_isr_default(int irq, void *context,
RMT_LL_EVENT_RX_DONE(channel));
}
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
/* Rx thres interrupt */
@@ -1463,8 +1463,8 @@ static int rmt_driver_install(rmt_channel_t channel, size_t rx_buf_size,
}
#endif
#if !CONFIG_SPIRAM_USE_MALLOC
p_rmt_obj[channel] = calloc(1, sizeof(rmt_obj_t));
#ifndef CONFIG_SPIRAM_USE_MALLOC
p_rmt_obj[channel] = kmm_calloc(1, sizeof(rmt_obj_t));
#else
if (!(intr_alloc_flags & ESP_INTR_FLAG_IRAM))
{
@@ -1472,9 +1472,7 @@ static int rmt_driver_install(rmt_channel_t channel, size_t rx_buf_size,
}
else
{
p_rmt_obj[channel] = heap_caps_calloc(1, sizeof(rmt_obj_t),
MALLOC_CAP_INTERNAL | \
MALLOC_CAP_8BIT);
p_rmt_obj[channel] = kmm_calloc(1, sizeof(rmt_obj_t));
}
#endif
@@ -1492,7 +1490,7 @@ static int rmt_driver_install(rmt_channel_t channel, size_t rx_buf_size,
p_rmt_obj[channel]->wait_done = false;
p_rmt_obj[channel]->loop_autostop = false;
#if !CONFIG_SPIRAM_USE_MALLOC
#ifndef CONFIG_SPIRAM_USE_MALLOC
nxsem_init(&p_rmt_obj[channel]->tx_sem, 0, 0);
nxsem_init(&p_rmt_obj[channel]->rx_sem, 0, 0);
#endif
@@ -1504,24 +1502,22 @@ static int rmt_driver_install(rmt_channel_t channel, size_t rx_buf_size,
circbuf_init(&p_rmt_obj[channel]->rx_buf, NULL, rx_buf_size);
}
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
if (p_rmt_obj[channel]->rx_item_buf == NULL && rx_buf_size > 0)
{
#if !CONFIG_SPIRAM_USE_MALLOC
p_rmt_obj[channel]->rx_item_buf = calloc(1, rx_buf_size);
#else
# ifndef CONFIG_SPIRAM_USE_MALLOC
p_rmt_obj[channel]->rx_item_buf = kmm_calloc(1, rx_buf_size);
# else
if (!(p_rmt_obj[channel]->intr_alloc_flags & ESP_INTR_FLAG_IRAM))
{
p_rmt_obj[channel]->rx_item_buf = calloc(1, rx_buf_size);
}
else
{
p_rmt_obj[channel]->rx_item_buf =
heap_caps_calloc(1, rx_buf_size,
MALLOC_CAP_INTERNAL | MALLOC_CAP_8BIT);
p_rmt_obj[channel]->rx_item_buf = kmm_calloc(1, rx_buf_size);
}
#endif
# endif
if (p_rmt_obj[channel]->rx_item_buf == NULL)
{
rmterr("RMT malloc fail");
@@ -1605,12 +1601,12 @@ static int rmt_write_items(rmt_channel_t channel,
channel);
DEBUGASSERT(mem_blocks + channel <= SOC_RMT_CHANNELS_PER_GROUP);
#if CONFIG_SPIRAM_USE_MALLOC
#ifdef CONFIG_SPIRAM_USE_MALLOC
if (p_rmt_obj[channel]->intr_alloc_flags & ESP_INTR_FLAG_IRAM)
{
if (!esp_ptr_internal(rmt_item))
{
remterr(RMT_PSRAM_BUFFER_WARN_STR);
rmterr(RMT_PSRAM_BUFFER_WARN_STR);
return ESP_ERR_INVALID_ARG;
}
}
@@ -1904,7 +1900,7 @@ static struct rmt_dev_s
* Initialize the selected RMT device in TX mode
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the TX channel
*
* Returned Value:
@@ -1926,7 +1922,7 @@ struct rmt_dev_s *esp_rmt_tx_init(int ch, int pin)
* Initialize the selected RMT device in RC mode
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the RX channel
*
* Returned Value:
arch/risc-v/src/common/espressif/esp_rmt.h
+2 -2
View File
@@ -72,7 +72,7 @@ extern "C"
* Initialize the selected RMT device in TX mode
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the TX channel
*
* Returned Value:
@@ -89,7 +89,7 @@ struct rmt_dev_s *esp_rmt_tx_init(int ch, int pin);
* Initialize the selected RMT device in RC mode
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the RX channel
*
* Returned Value:
arch/risc-v/src/common/espressif/esp_ws2812.c
+3 -3
View File
@@ -126,9 +126,9 @@ extern uint32_t g_rmt_source_clock_hz;
*
* Description:
* Maps a byte to a sequence of RMT items. Each bit in the byte is
* represented by an RMT item (32-bit value). Iterates over each bit in
* the byte, creating an RMT item for each bit, set or not. The created
* RMT items are stored in the destination array.
* represented by an RMT item (32-bit value). The function iterates over
* each bit in the byte, creating an RMT item for each bit, HIGH or LOW.
* The created RMT items are stored in the destination array.
*
* Input Parameters:
* dev - Pointer to the RMT-based WS2812 device structure.
arch/xtensa/src/common/espressif/Kconfig
+4 -2
View File
@@ -3,5 +3,7 @@ config ESP_RMT
default n
depends on RMT
---help---
Remote Control Module is currently used to control WS2812
RGB LED normally used on LED strips.
The RMT (Remote Control Transceiver) peripheral was designed to act as
an infrared transceiver. However, due to the flexibility of its data
format, RMT can be extended to a versatile and general-purpose
transceiver, transmitting or receiving many other types of signals.
arch/xtensa/src/common/espressif/esp_rmt.c
+26 -30
View File
@@ -268,7 +268,7 @@ struct rmt_dev_common_s
struct rmt_dev_lowerhalf_s
{
/* The following block is part of the upper-hald device struct */
/* The following block is part of the upper-half device struct */
FAR const struct rmt_ops_s *ops;
FAR struct circbuf_s *circbuf;
@@ -287,18 +287,18 @@ struct rmt_obj_s
size_t tx_len_rem;
size_t tx_sub_len;
bool wait_done; /* Mark whether wait tx done */
bool loop_autostop; /* mark whether loop auto-stop is enabled */
bool loop_autostop; /* Mark whether loop auto-stop is enabled */
rmt_channel_t channel;
const rmt_item32_t *tx_data;
sem_t tx_sem;
#if CONFIG_SPIRAM_USE_MALLOC
#ifdef CONFIG_SPIRAM_USE_MALLOC
int intr_alloc_flags;
sem_t tx_sem_buffer;
#endif
rmt_item32_t *tx_buf;
struct circbuf_s rx_buf;
sem_t rx_sem;
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
rmt_item32_t *rx_item_buf;
uint32_t rx_item_buf_size;
uint32_t rx_item_len;
@@ -479,7 +479,7 @@ static void rmt_module_enable(void)
*
****************************************************************************/
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
static int rmt_set_rx_thr_intr_en(rmt_channel_t channel, bool en,
uint16_t evt_thresh)
{
@@ -543,7 +543,7 @@ static int rmt_rx_start(rmt_channel_t channel, bool rx_idx_rst)
{
irqstate_t flags;
rmt_channel_t ch = RMT_DECODE_RX_CHANNEL(channel);
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
const uint32_t item_block_len =
rmt_ll_rx_get_mem_blocks(g_rmtdev_common.hal.regs, ch) *
RMT_MEM_ITEM_NUM;
@@ -564,7 +564,7 @@ static int rmt_rx_start(rmt_channel_t channel, bool rx_idx_rst)
rmt_ll_enable_interrupt(g_rmtdev_common.hal.regs,
RMT_LL_EVENT_RX_DONE(ch), true);
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
p_rmt_obj[channel]->rx_item_start_idx = 0;
p_rmt_obj[channel]->rx_item_len = 0;
rmt_set_rx_thr_intr_en(channel, true, item_block_len / 2);
@@ -607,7 +607,7 @@ static int rmt_tx_start(rmt_channel_t channel, bool tx_idx_rst)
rmt_ll_clear_interrupt_status(g_rmtdev_common.hal.regs,
RMT_LL_EVENT_TX_DONE(channel));
/* enable tx end interrupt in non-loop mode */
/* Enable tx end interrupt in non-loop mode */
if (!rmt_ll_tx_is_loop_enabled(g_rmtdev_common.hal.regs, channel))
{
@@ -985,7 +985,7 @@ static int rmt_internal_config(rmt_dev_t *dev,
rmt_ll_rx_enable_filter(dev, RMT_DECODE_RX_CHANNEL(channel),
rmt_param->rx_config.filter_en);
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
/* always enable rx ping-pong */
@@ -1283,7 +1283,7 @@ static int IRAM_ATTR rmt_driver_isr_default(int irq, void *context,
addr = (rmt_item32_t *)
RMTMEM.chan[RMT_ENCODE_RX_CHANNEL(channel)].data32;
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
if (item_len > p_rmt->rx_item_start_idx)
{
item_len = item_len - p_rmt->rx_item_start_idx;
@@ -1323,7 +1323,7 @@ static int IRAM_ATTR rmt_driver_isr_default(int irq, void *context,
rmterr("RMT RX BUFFER ERROR");
}
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
p_rmt->rx_item_start_idx = 0;
p_rmt->rx_item_len = 0;
memset((void *)p_rmt->rx_item_buf, 0, p_rmt->rx_item_buf_size);
@@ -1338,7 +1338,7 @@ static int IRAM_ATTR rmt_driver_isr_default(int irq, void *context,
RMT_LL_EVENT_RX_DONE(channel));
}
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
/* Rx thres interrupt */
@@ -1514,8 +1514,8 @@ static int rmt_driver_install(rmt_channel_t channel, size_t rx_buf_size,
}
#endif
#if !CONFIG_SPIRAM_USE_MALLOC
p_rmt_obj[channel] = calloc(1, sizeof(rmt_obj_t));
#ifndef CONFIG_SPIRAM_USE_MALLOC
p_rmt_obj[channel] = kmm_calloc(1, sizeof(rmt_obj_t));
#else
if (!(intr_alloc_flags & ESP_INTR_FLAG_IRAM))
{
@@ -1523,9 +1523,7 @@ static int rmt_driver_install(rmt_channel_t channel, size_t rx_buf_size,
}
else
{
p_rmt_obj[channel] = heap_caps_calloc(1, sizeof(rmt_obj_t),
MALLOC_CAP_INTERNAL | \
MALLOC_CAP_8BIT);
p_rmt_obj[channel] = kmm_calloc(1, sizeof(rmt_obj_t));
}
#endif
@@ -1543,7 +1541,7 @@ static int rmt_driver_install(rmt_channel_t channel, size_t rx_buf_size,
p_rmt_obj[channel]->wait_done = false;
p_rmt_obj[channel]->loop_autostop = false;
#if !CONFIG_SPIRAM_USE_MALLOC
#ifndef CONFIG_SPIRAM_USE_MALLOC
nxsem_init(&p_rmt_obj[channel]->tx_sem, 0, 0);
nxsem_init(&p_rmt_obj[channel]->rx_sem, 0, 0);
#endif
@@ -1555,24 +1553,22 @@ static int rmt_driver_install(rmt_channel_t channel, size_t rx_buf_size,
circbuf_init(&p_rmt_obj[channel]->rx_buf, NULL, rx_buf_size);
}
#if SOC_RMT_SUPPORT_RX_PINGPONG
#ifdef SOC_RMT_SUPPORT_RX_PINGPONG
if (p_rmt_obj[channel]->rx_item_buf == NULL && rx_buf_size > 0)
{
#if !CONFIG_SPIRAM_USE_MALLOC
p_rmt_obj[channel]->rx_item_buf = calloc(1, rx_buf_size);
#else
# ifndef CONFIG_SPIRAM_USE_MALLOC
p_rmt_obj[channel]->rx_item_buf = kmm_calloc(1, rx_buf_size);
# else
if (!(p_rmt_obj[channel]->intr_alloc_flags & ESP_INTR_FLAG_IRAM))
{
p_rmt_obj[channel]->rx_item_buf = calloc(1, rx_buf_size);
}
else
{
p_rmt_obj[channel]->rx_item_buf =
heap_caps_calloc(1, rx_buf_size,
MALLOC_CAP_INTERNAL | MALLOC_CAP_8BIT);
p_rmt_obj[channel]->rx_item_buf = kmm_calloc(1, rx_buf_size);
}
#endif
# endif
if (p_rmt_obj[channel]->rx_item_buf == NULL)
{
rmterr("RMT malloc fail");
@@ -1656,12 +1652,12 @@ static int rmt_write_items(rmt_channel_t channel,
channel);
DEBUGASSERT(mem_blocks + channel <= SOC_RMT_CHANNELS_PER_GROUP);
#if CONFIG_SPIRAM_USE_MALLOC
#ifdef CONFIG_SPIRAM_USE_MALLOC
if (p_rmt_obj[channel]->intr_alloc_flags & ESP_INTR_FLAG_IRAM)
{
if (!esp_ptr_internal(rmt_item))
{
remterr(RMT_PSRAM_BUFFER_WARN_STR);
rmterr(RMT_PSRAM_BUFFER_WARN_STR);
return ESP_ERR_INVALID_ARG;
}
}
@@ -1955,7 +1951,7 @@ static struct rmt_dev_s
* Initialize the selected RMT device in TX mode
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the TX channel
*
* Returned Value:
@@ -1977,7 +1973,7 @@ struct rmt_dev_s *esp_rmt_tx_init(int ch, int pin)
* Initialize the selected RMT device in RC mode
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the RX channel
*
* Returned Value:
arch/xtensa/src/common/espressif/esp_rmt.h
+2 -2
View File
@@ -72,7 +72,7 @@ extern "C"
* Initialize the selected RMT device in TX mode
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the TX channel
*
* Returned Value:
@@ -89,7 +89,7 @@ struct rmt_dev_s *esp_rmt_tx_init(int ch, int pin);
* Initialize the selected RMT device in RC mode
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the RX channel
*
* Returned Value:
arch/xtensa/src/common/espressif/esp_ws2812.c
+3 -3
View File
@@ -126,9 +126,9 @@ extern uint32_t g_rmt_source_clock_hz;
*
* Description:
* Maps a byte to a sequence of RMT items. Each bit in the byte is
* represented by an RMT item (32-bit value). Iterates over each bit in
* the byte, creating an RMT item for each bit, set or not. The created
* RMT items are stored in the destination array.
* represented by an RMT item (32-bit value). The function iterates over
* each bit in the byte, creating an RMT item for each bit, HIGH or LOW.
* The created RMT items are stored in the destination array.
*
* Input Parameters:
* dev - Pointer to the RMT-based WS2812 device structure.
arch/xtensa/src/common/espressif/esp_ws2812.h
+3 -3
View File
@@ -65,9 +65,9 @@ extern "C"
****************************************************************************/
struct ws2812_dev_s *esp_ws2812_setup(const char *path,
struct rmt_dev_s *rmt,
uint16_t pixel_count,
bool has_white);
struct rmt_dev_s *rmt,
uint16_t pixel_count,
bool has_white);
/****************************************************************************
* Name: esp_ws2812_release
boards/risc-v/esp32c3/common/include/esp_board_rmt.h
+4 -4
View File
@@ -56,10 +56,10 @@ extern "C"
* Name: board_rmt_rxinitialize
*
* Description:
* Initialize the RMT peripheral and register a RX device.
* Initialize the RMT peripheral and register an RX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the RX channel
*
* Returned Value:
@@ -73,10 +73,10 @@ int board_rmt_rxinitialize(int ch, int pin);
* Name: board_rmt_txinitialize
*
* Description:
* Initialize the RMT peripheral and register a TX device.
* Initialize the RMT peripheral and register an TX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the TX channel
*
* Returned Value:
boards/risc-v/esp32c3/common/src/esp_board_rmt.c
+4 -4
View File
@@ -72,10 +72,10 @@
* Name: board_rmt_rxinitialize
*
* Description:
* Initialize the RMT peripheral and register a RX device.
* Initialize the RMT peripheral and register an RX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the RX channel
*
* Returned Value:
@@ -103,10 +103,10 @@ int board_rmt_rxinitialize(int ch, int pin)
* Name: board_rmt_txinitialize
*
* Description:
* Initialize the RMT peripheral and register a TX device.
* Initialize the RMT peripheral and register an TX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the TX channel
*
* Returned Value:
boards/risc-v/esp32c6/common/include/esp_board_rmt.h
+4 -4
View File
@@ -56,10 +56,10 @@ extern "C"
* Name: board_rmt_rxinitialize
*
* Description:
* Initialize the RMT peripheral and register a RX device.
* Initialize the RMT peripheral and register an RX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the RX channel
*
* Returned Value:
@@ -73,10 +73,10 @@ int board_rmt_rxinitialize(int ch, int pin);
* Name: board_rmt_txinitialize
*
* Description:
* Initialize the RMT peripheral and register a TX device.
* Initialize the RMT peripheral and register an TX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the TX channel
*
* Returned Value:
boards/risc-v/esp32c6/common/src/esp_board_rmt.c
+4 -4
View File
@@ -72,10 +72,10 @@
* Name: board_rmt_rxinitialize
*
* Description:
* Initialize the RMT peripheral and register a RX device.
* Initialize the RMT peripheral and register an RX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the RX channel
*
* Returned Value:
@@ -103,10 +103,10 @@ int board_rmt_rxinitialize(int ch, int pin)
* Name: board_rmt_txinitialize
*
* Description:
* Initialize the RMT peripheral and register a TX device.
* Initialize the RMT peripheral and register an TX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the TX channel
*
* Returned Value:
boards/risc-v/esp32h2/common/include/esp_board_rmt.h
+4 -4
View File
@@ -56,10 +56,10 @@ extern "C"
* Name: board_rmt_rxinitialize
*
* Description:
* Initialize the RMT peripheral and register a RX device.
* Initialize the RMT peripheral and register an RX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the RX channel
*
* Returned Value:
@@ -73,10 +73,10 @@ int board_rmt_rxinitialize(int ch, int pin);
* Name: board_rmt_txinitialize
*
* Description:
* Initialize the RMT peripheral and register a TX device.
* Initialize the RMT peripheral and register an TX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the TX channel
*
* Returned Value:
boards/risc-v/esp32h2/common/src/esp_board_rmt.c
+4 -4
View File
@@ -72,10 +72,10 @@
* Name: board_rmt_rxinitialize
*
* Description:
* Initialize the RMT peripheral and register a RX device.
* Initialize the RMT peripheral and register an RX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the RX channel
*
* Returned Value:
@@ -103,10 +103,10 @@ int board_rmt_rxinitialize(int ch, int pin)
* Name: board_rmt_txinitialize
*
* Description:
* Initialize the RMT peripheral and register a TX device.
* Initialize the RMT peripheral and register an TX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the TX channel
*
* Returned Value:
boards/xtensa/esp32/common/include/esp32_board_rmt.h
+4 -4
View File
@@ -56,10 +56,10 @@ extern "C"
* Name: board_rmt_rxinitialize
*
* Description:
* Initialize the RMT peripheral and register a RX device.
* Initialize the RMT peripheral and register an RX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the RX channel
*
* Returned Value:
@@ -73,10 +73,10 @@ int board_rmt_rxinitialize(int ch, int pin);
* Name: board_rmt_txinitialize
*
* Description:
* Initialize the RMT peripheral and register a TX device.
* Initialize the RMT peripheral and register an TX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the TX channel
*
* Returned Value:
boards/xtensa/esp32/common/src/esp32_board_rmt.c
+5 -5
View File
@@ -74,10 +74,10 @@
* Name: board_rmt_rxinitialize
*
* Description:
* Initialize the RMT peripheral and register a RX device.
* Initialize the RMT peripheral and register an RX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the RX channel
*
* Returned Value:
@@ -105,10 +105,10 @@ int board_rmt_rxinitialize(int ch, int pin)
* Name: board_rmt_txinitialize
*
* Description:
* Initialize the RMT peripheral and register a TX device.
* Initialize the RMT peripheral and register an TX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the TX channel
*
* Returned Value:
@@ -141,7 +141,7 @@ int board_rmt_txinitialize(int ch, int pin)
#ifdef CONFIG_WS2812_NON_SPI_DRIVER
led = esp_ws2812_setup("/dev/leds0", rmt,
CONFIG_WS2812_LED_COUNT, false);
CONFIG_WS2812_LED_COUNT, false);
if (led == NULL)
{
boards/xtensa/esp32s2/common/include/esp32s2_board_rmt.h
+4 -4
View File
@@ -56,10 +56,10 @@ extern "C"
* Name: board_rmt_rxinitialize
*
* Description:
* Initialize the RMT peripheral and register a RX device.
* Initialize the RMT peripheral and register an RX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the RX channel
*
* Returned Value:
@@ -73,10 +73,10 @@ int board_rmt_rxinitialize(int ch, int pin);
* Name: board_rmt_txinitialize
*
* Description:
* Initialize the RMT peripheral and register a TX device.
* Initialize the RMT peripheral and register an TX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the TX channel
*
* Returned Value:
boards/xtensa/esp32s2/common/src/esp32s2_board_rmt.c
+4 -4
View File
@@ -74,10 +74,10 @@
* Name: board_rmt_rxinitialize
*
* Description:
* Initialize the RMT peripheral and register a RX device.
* Initialize the RMT peripheral and register an RX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the RX channel
*
* Returned Value:
@@ -105,10 +105,10 @@ int board_rmt_rxinitialize(int ch, int pin)
* Name: board_rmt_txinitialize
*
* Description:
* Initialize the RMT peripheral and register a TX device.
* Initialize the RMT peripheral and register an TX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the TX channel
*
* Returned Value:
boards/xtensa/esp32s3/common/include/esp32s3_board_rmt.h
+4 -4
View File
@@ -56,10 +56,10 @@ extern "C"
* Name: board_rmt_rxinitialize
*
* Description:
* Initialize the RMT peripheral and register a RX device.
* Initialize the RMT peripheral and register an RX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the RX channel
*
* Returned Value:
@@ -73,10 +73,10 @@ int board_rmt_rxinitialize(int ch, int pin);
* Name: board_rmt_txinitialize
*
* Description:
* Initialize the RMT peripheral and register a TX device.
* Initialize the RMT peripheral and register an TX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the TX channel
*
* Returned Value:
boards/xtensa/esp32s3/common/src/esp32s3_board_rmt.c
+4 -4
View File
@@ -74,10 +74,10 @@
* Name: board_rmt_rxinitialize
*
* Description:
* Initialize the RMT peripheral and register a RX device.
* Initialize the RMT peripheral and register an RX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the RX channel
*
* Returned Value:
@@ -105,10 +105,10 @@ int board_rmt_rxinitialize(int ch, int pin)
* Name: board_rmt_txinitialize
*
* Description:
* Initialize the RMT peripheral and register a TX device.
* Initialize the RMT peripheral and register an TX device.
*
* Input Parameters:
* ch - the RMT's channel that will be used
* ch - The RMT's channel that will be used
* pin - The pin used for the TX channel
*
* Returned Value: