Mirrors_Framework/nuttx
1
0
Fork 0
mirror of https://github.com/apache/nuttx.git synced 2026-05-24 07:46:16 +08:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity

configs/mikroe-stm32f4: Add new configurations plus support for the MIO283QT2 display from Ken Pettit

Browse Source
This commit is contained in:
Gregory Nutt
2013-05-07 14:34:09 -06:00
parent 24368a6581
commit 84b2c77a63
22 changed files with 4558 additions and 329 deletions
Download Patch File Download Diff File Expand all files Collapse all files
ChangeLog
+4 -1
View File
@@ -4687,4 +4687,7 @@
the "wfi" sleep mode. This is needed with certain JTAG debuggers to
to prevent the debug session from begin disconnected. From Ken Pettit
(2013-5-7).
* configs/mikroe-stm32f4/fulldemo/, nx/, nxlines/, nxtext/: Add more
configurationsf for the Mikroelektronika Multimedia STM32-M4 board.
From Ken Pettit (2013-5-7).
*
configs/mikroe-stm32f4/README.txt
+58 -37
View File
@@ -405,6 +405,16 @@ There are two version of the FPU support built into the STM32 port.
+ENTRY(__start) /* Treat __start as the anchor for dead code stripping */
+EXTERN(_vectors) /* Force the vectors to be included in the output */
MIO283QT-2
==========
The Mikroe-SMT32F4 board as an on-board MIO283QT-2 TFT LCD that can be
configured and used. This is a 320x240 resolution display with color
capability to 262K colors, though the mio283qt-2 driver in NuttX only
supports 16-bit color depth, or 65K colors. Changes to both the
mio283qt-2 driver and the driver interface layer would need to be made
to support 24 BPP mode.
CFLAGS
------
@@ -738,6 +748,54 @@ instead of configure.sh:
Where <subdir> is one of the following:
fulldemo
--------
This is an example that includes an NSH shell over USB that also
enables all features of the Mikroe-STM32F4 board including the LCD,
on-board 1M Flash with SMART filesystem, Aux RS-232 serial port on the
expansion header, etc. A couple of the NX graphics commands are made
available via the NSH prompt for performing LCD demonstrations, and the
nximage example is used as a splash-screen at startup.
nsh
---
This is an NSH example that uses USART2 as the console. Note that
the Mikroe-STM32F4 board doesn't actually have onboard line drivers
or a connector for USART2, but it does route the USART2 signals to
the expansion header. To use this demo, you would need to connect
an external 3.3V RS-232 line driver to the USART's I/O lines on the
expansion header.
NOTE: This demo doesn't quite work yet. I can get output to the
USART, but so far, I have not gotten nsh to actually come up.
nx
--
An example using the NuttX graphics system (NX). This example
focuses on general window controls, movement, mouse and keyboard
input.
CONFIG_LCD_LANDSCAPE=y : 320x240 landscape orientation
CONFIG_LCD_MIO283QT2
nxlines:
------
An example using the NuttX graphics system (NX). This example focuses on
placing lines on the background in various orientations using the
on-board TFT LCD.
CONFIG_LCD_LANDSCAPE=y : 320x240 landscape orientation
CONFIG_LCD_MIO283QT2
nxtext:
------
Another example using the NuttX graphics system (NX). This
example focuses on placing text on the background while pop-up
windows occur. Text should continue to update normally with
or without the popup windows present.
usbnsh:
-------
@@ -810,40 +868,3 @@ Where <subdir> is one of the following:
CONFIG_PL2303=y : The Prolifics PL2303 emulation is enabled
CONFIG_PL2303_CONSOLE=y : The PL2303 serial device is the console
winbuild:
--------
This is a version of the apps/example/ostest, but configure to build natively
in the Windows CMD shell.
NOTES:
1. The beginnings of a Windows native build are in place but still not full
usable as of this writing. The windows native build logic is currently
separate and must be started by:
make -f Makefile.win
This build:
- Uses all Windows style paths
- Uses primarily Windows batch commands from cmd.exe, with
- A few extensions from GNUWin32 (or MSYS is you prefer)
In this build, you cannot use a Cygwin or MSYS shell. Rather the build must
be performed in a Windows console. Here is a better shell than than the
standard issue, CMD.exe shell: ConEmu which can be downloaded from:
http://code.google.com/p/conemu-maximus5/
CONFIG_HOST_WINDOWS=y : Windows
CONFIG_WINDOWS_NATIVE=y : Native Windows environment
CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows
Build Tools. The build still relies on some Unix-like commands. I use
the GNUWin32 tools that can be downloaded from http://gnuwin32.sourceforge.net/.
The MSYS tools are probably also a option but are likely lower performance
since they are based on Cygwin 1.3.
Host Compiler: I use the MingGW compiler which can be downloaded from
http://www.mingw.org/. If you are using GNUWin32, then it is recommended
the you not install the optional MSYS components as there may be conflicts.
configs/mikroe-stm32f4/fulldemo/Make.defs
+111
View File
@@ -0,0 +1,111 @@
############################################################################
# configs/mikroe-stm32f4/usbnsh/Make.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =
configs/mikroe-stm32f4/fulldemo/defconfig
+916
View File
File diff suppressed because it is too large Load Diff
configs/mikroe-stm32f4/fulldemo/setenv.sh
Executable
+77
View File
@@ -0,0 +1,77 @@
#!/bin/bash
# configs/stm32f4discovery/usbnsh/setenv.sh
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
export TOOLCHAIN_BIN="/home/ken/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"
configs/mikroe-stm32f4/nsh/defconfig
+96 -55
View File
@@ -8,14 +8,10 @@ CONFIG_NUTTX_NEWCONFIG=y
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
# CONFIG_HOST_LINUX is not set
CONFIG_HOST_LINUX=y
# CONFIG_HOST_OSX is not set
CONFIG_HOST_WINDOWS=y
# CONFIG_HOST_WINDOWS is not set
# CONFIG_HOST_OTHER is not set
# CONFIG_WINDOWS_NATIVE is not set
CONFIG_WINDOWS_CYGWIN=y
# CONFIG_WINDOWS_MSYS is not set
# CONFIG_WINDOWS_OTHER is not set
#
# Build Configuration
@@ -93,13 +89,10 @@ CONFIG_ARCH_HAVE_MPU=y
#
# ARMV7M Configuration Options
#
# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
# CONFIG_SERIAL_TERMIOS is not set
#
@@ -178,11 +171,11 @@ CONFIG_STM32_STM32F40XX=y
# CONFIG_STM32_OTGFS is not set
# CONFIG_STM32_OTGHS is not set
CONFIG_STM32_PWR=y
# CONFIG_STM32_RNG is not set
CONFIG_STM32_RNG=y
# CONFIG_STM32_SDIO is not set
CONFIG_STM32_SPI1=y
# CONFIG_STM32_SPI2 is not set
# CONFIG_STM32_SPI3 is not set
# CONFIG_STM32_SPI1 is not set
CONFIG_STM32_SPI2=y
CONFIG_STM32_SPI3=y
CONFIG_STM32_SYSCFG=y
# CONFIG_STM32_TIM1 is not set
# CONFIG_STM32_TIM2 is not set
@@ -215,8 +208,9 @@ CONFIG_STM32_SPI=y
# CONFIG_STM32_JTAG_FULL_ENABLE is not set
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
CONFIG_STM32_JTAG_SW_ENABLE=y
CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
# CONFIG_STM32_FORCEPOWER is not set
# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=y
# CONFIG_STM32_CCMEXCLUDE is not set
CONFIG_STM32_USART=y
@@ -282,25 +276,26 @@ CONFIG_BOOT_RUNFROMFLASH=y
#
# Board Selection
#
CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
# CONFIG_ARCH_BOARD_MIKROE_STM32F4 is not set
# CONFIG_ARCH_BOARD_STM32F4_DISCOVERY is not set
CONFIG_ARCH_BOARD_MIKROE_STM32F4=y
# CONFIG_ARCH_BOARD_CUSTOM is not set
CONFIG_ARCH_BOARD="stm32f4discovery"
CONFIG_ARCH_BOARD="mikroe-stm32f4"
#
# Common Board Options
#
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
# CONFIG_ARCH_IRQBUTTONS is not set
CONFIG_NSH_MMCSDMINOR=0
CONFIG_NSH_MMCSDSLOTNO=0
CONFIG_NSH_MMCSDSPIPORTNO=0
#
# Board-Specific Options
#
CONFIG_MIKROE_FLASH=y
CONFIG_MIKROE_FLASH_MINOR=0
CONFIG_MIKROE_FLASH_PART=y
CONFIG_MIKROE_FLASH_PART_LIST="256,768"
# CONFIG_MIKROE_RAMMTD is not set
#
# RTOS Features
@@ -312,10 +307,10 @@ CONFIG_RR_INTERVAL=200
CONFIG_TASK_NAME_SIZE=0
# CONFIG_SCHED_HAVE_PARENT is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2011
CONFIG_START_MONTH=12
CONFIG_START_DAY=6
CONFIG_DEV_CONSOLE=y
CONFIG_START_YEAR=2013
CONFIG_START_MONTH=1
CONFIG_START_DAY=27
# CONFIG_DEV_CONSOLE is not set
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
# CONFIG_FDCLONE_DISABLE is not set
@@ -326,13 +321,7 @@ CONFIG_SCHED_WAITPID=y
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_CLOCK is not set
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
# CONFIG_DISABLE_ENVIRON is not set
# CONFIG_DISABLE_OS_API is not set
#
# Signal Numbers
@@ -360,7 +349,7 @@ CONFIG_PREALLOC_TIMERS=4
#
# Stack and heap information
#
CONFIG_IDLETHREAD_STACKSIZE=1024
CONFIG_IDLETHREAD_STACKSIZE=2048
CONFIG_USERMAIN_STACKSIZE=2048
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=2048
@@ -370,9 +359,11 @@ CONFIG_PTHREAD_STACK_DEFAULT=2048
#
CONFIG_DISABLE_POLL=y
CONFIG_DEV_NULL=y
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
CONFIG_DEV_ZERO=y
CONFIG_ARCH_HAVE_RNG=y
CONFIG_DEV_RANDOM=y
CONFIG_LOOP=y
CONFIG_RAMDISK=y
# CONFIG_CAN is not set
# CONFIG_PWM is not set
# CONFIG_I2C is not set
@@ -387,13 +378,48 @@ CONFIG_SPI_EXCHANGE=y
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
# CONFIG_LCD is not set
# CONFIG_MMCSD is not set
# CONFIG_MTD is not set
CONFIG_MMCSD=y
CONFIG_MMCSD_NSLOTS=1
# CONFIG_MMCSD_READONLY is not set
# CONFIG_MMCSD_MULTIBLOCK_DISABLE is not set
CONFIG_MMCSD_MMCSUPPORT=y
CONFIG_MMCSD_HAVECARDDETECT=y
CONFIG_MMCSD_SPI=y
CONFIG_MMCSD_SPICLOCK=20000000
# CONFIG_MMCSD_SDIO is not set
CONFIG_MTD=y
#
# MTD Configuration
#
CONFIG_MTD_PARTITION=y
CONFIG_MTD_BYTE_WRITE=y
#
# MTD Device Drivers
#
CONFIG_RAMMTD=y
CONFIG_RAMMTD_BLOCKSIZE=512
CONFIG_RAMMTD_ERASESIZE=4096
CONFIG_RAMMTD_ERASESTATE=0xff
# CONFIG_RAMMTD_FLASHSIM is not set
# CONFIG_MTD_AT24XX is not set
# CONFIG_MTD_AT45DB is not set
CONFIG_MTD_M25P=y
CONFIG_M25P_SPIMODE=0
CONFIG_M25P_MANUFACTURER=0x1C
CONFIG_M25P_MEMORY_TYPE=0x31
CONFIG_M25P_SUBSECTOR_ERASE=y
CONFIG_MTD_SMART=y
CONFIG_MTD_SMART_SECTOR_SIZE=512
# CONFIG_MTD_RAMTRON is not set
# CONFIG_MTD_SST25 is not set
# CONFIG_MTD_SST39FV is not set
# CONFIG_MTD_W25 is not set
# CONFIG_PIPES is not set
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERCOMM_CONSOLE is not set
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
# CONFIG_16550_UART is not set
@@ -406,8 +432,8 @@ CONFIG_USART2_SERIAL_CONSOLE=y
#
# USART2 Configuration
#
CONFIG_USART2_RXBUFSIZE=128
CONFIG_USART2_TXBUFSIZE=128
CONFIG_USART2_RXBUFSIZE=256
CONFIG_USART2_TXBUFSIZE=256
CONFIG_USART2_BAUD=115200
CONFIG_USART2_BITS=8
CONFIG_USART2_PARITY=0
@@ -439,17 +465,26 @@ CONFIG_USART2_2STOP=0
#
# CONFIG_DISABLE_MOUNTPOINT is not set
# CONFIG_FS_RAMMAP is not set
# CONFIG_FS_FAT is not set
CONFIG_FS_FAT=y
# CONFIG_FAT_LCNAMES is not set
# CONFIG_FAT_LFN is not set
# CONFIG_FS_FATTIME is not set
# CONFIG_FAT_DMAMEMORY is not set
# CONFIG_FS_NXFFS is not set
# CONFIG_FS_ROMFS is not set
# CONFIG_FS_SMARTFS is not set
CONFIG_FS_ROMFS=y
CONFIG_FS_SMARTFS=y
CONFIG_SMARTFS_ERASEDSTATE=0xff
CONFIG_SMARTFS_MAXNAMLEN=16
# CONFIG_SMARTFS_MULTI_ROOT_DIRS is not set
# CONFIG_FS_BINFS is not set
#
# System Logging
#
# CONFIG_SYSLOG_ENABLE is not set
# CONFIG_SYSLOG is not set
CONFIG_SYSLOG=y
CONFIG_SYSLOG_CHAR=y
CONFIG_SYSLOG_DEVPATH="/dev/ttyS0"
#
# Graphics Support
@@ -497,8 +532,9 @@ CONFIG_EOL_IS_EITHER_CRLF=y
# CONFIG_LIBC_EXECFUNCS is not set
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
# CONFIG_LIBC_STRERROR is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_LIBC_STRERROR=y
# CONFIG_LIBC_STRERROR_SHORT is not set
CONFIG_LIBC_PERROR_STDOUT=y
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
@@ -573,7 +609,9 @@ CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_FLASH_TEST is not set
# CONFIG_EXAMPLES_SMART_TEST is not set
# CONFIG_EXAMPLES_SMART is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
@@ -674,20 +712,22 @@ CONFIG_NSH_BUILTIN_APPS=y
#
# Configure Command Options
#
# CONFIG_NSH_CMDOPT_DF_H is not set
CONFIG_NSH_CMDOPT_DF_H=y
CONFIG_NSH_CODECS_BUFSIZE=128
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_STRERROR=y
CONFIG_NSH_LINELEN=64
CONFIG_NSH_NESTDEPTH=3
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLEBG is not set
# CONFIG_NSH_ROMFSETC is not set
CONFIG_NSH_CONSOLE=y
#
# USB Trace Support
#
# CONFIG_NSH_CONDEV is not set
# CONFIG_NSH_ARCHINIT is not set
CONFIG_NSH_ARCHINIT=y
#
# NxWidgets/NxWM
@@ -714,6 +754,7 @@ CONFIG_NSH_CONSOLE=y
#
# FLASH Erase-all Command
#
CONFIG_SYSTEM_FLASH_ERASEALL=y
#
# readline()
@@ -739,7 +780,7 @@ CONFIG_READLINE_ECHO=y
#
# Sysinfo
#
# CONFIG_SYSTEM_SYSINFO is not set
CONFIG_SYSTEM_SYSINFO=y
#
# USB Monitor
configs/mikroe-stm32f4/nx/Make.defs
+111
View File
@@ -0,0 +1,111 @@
############################################################################
# configs/mikroe-stm32f4/usbnsh/Make.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =
configs/mikroe-stm32f4/nx/defconfig
+786
View File
File diff suppressed because it is too large Load Diff
configs/mikroe-stm32f4/nx/setenv.sh
Executable
+77
View File
@@ -0,0 +1,77 @@
#!/bin/bash
# configs/stm32f4discovery/usbnsh/setenv.sh
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
export TOOLCHAIN_BIN="/home/ken/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"
configs/mikroe-stm32f4/nxlines/Make.defs
+111
View File
@@ -0,0 +1,111 @@
############################################################################
# configs/mikroe-stm32f4/usbnsh/Make.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =
configs/mikroe-stm32f4/nxlines/defconfig
+786
View File
File diff suppressed because it is too large Load Diff
configs/mikroe-stm32f4/nxlines/setenv.sh
Executable
+77
View File
@@ -0,0 +1,77 @@
#!/bin/bash
# configs/stm32f4discovery/usbnsh/setenv.sh
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
export TOOLCHAIN_BIN="/home/ken/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"
configs/mikroe-stm32f4/nxtext/Make.defs
+111
View File
@@ -0,0 +1,111 @@
############################################################################
# configs/mikroe-stm32f4/usbnsh/Make.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =
configs/mikroe-stm32f4/nxtext/defconfig
+797
View File
File diff suppressed because it is too large Load Diff
configs/mikroe-stm32f4/nxtext/setenv.sh
Executable
+77
View File
@@ -0,0 +1,77 @@
#!/bin/bash
# configs/stm32f4discovery/usbnsh/setenv.sh
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
export TOOLCHAIN_BIN="/home/ken/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"
configs/mikroe-stm32f4/src/Makefile
+1 -1
View File
@@ -90,7 +90,7 @@ ifeq ($(CONFIG_INPUT),y)
CSRCS += up_touchscreen.c
endif
ifeq ($(ARCH_CONFIG_LCD_MIO283QT2),y)
ifeq ($(CONFIG_LCD_MIO283QT2),y)
CSRCS += up_mio283qt2.c
endif
configs/mikroe-stm32f4/src/mikroe-stm32f4-internal.h
+90 -1
View File
@@ -115,6 +115,70 @@
# define GPIO_OTGFS_OVER (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTD|GPIO_PIN5)
#endif
/* TFT LCD Controller GPIOs
*
* PE8, LCD_RST -- Low value holds in reset
* PE15, LCD_CS -- Low value selects LCD
* PE9, LCD_BLED -- Backlight -- Low value turns off
* PE12, RS -- High values selects data
*
* PE10, PMPRD -- Low to read from the LCD
* PE11, PMPWR -- Low to write to the LCD
*
*/
#define GPIO_LCD_RST (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN8)
#define GPIO_LCD_CS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN15)
#define LCD_CS_PIN GPIO_PIN15
#define GPIO_LCD_BLED (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN9)
#define GPIO_LCD_RS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN12)
#define LCD_RS_PIN GPIO_PIN12
#define GPIO_LCD_PMPRD (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN10)
#define LCD_PMPRD_PIN GPIO_PIN10
#define GPIO_LCD_PMPWR (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN11)
#define LCD_PMPWR_PIN GPIO_PIN11
#define GPIO_LCD_T_D0 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN0)
#define GPIO_LCD_T_D1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN1)
#define GPIO_LCD_T_D2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN2)
#define GPIO_LCD_T_D3 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN3)
#define GPIO_LCD_T_D4 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN4)
#define GPIO_LCD_T_D5 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN5)
#define GPIO_LCD_T_D6 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN6)
#define GPIO_LCD_T_D7 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN7)
#define GPIO_TP_DRIVEA (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN8)
#define GPIO_TP_DRIVEB (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN9)
/****************************************************************************************************
* Public Types
****************************************************************************************************/
@@ -165,6 +229,31 @@ void weak_function stm32_usbinitialize(void);
#error "The Mikroe-STM32F4 board does not support HOST OTG, only device!"
#endif
/****************************************************************************************************
* Name: stm32_lcdinitialize
*
* Description:
* Initialize the LCD. This function should be called early in the boot sequendce -- Even if the
* LCD is not enabled. In that case we should at a minimum at least disable the LCD backlight.
*
****************************************************************************************************/
#ifdef CONFIG_LCD_MIO283QT2
void stm32_lcdinitialize(void);
#endif
/****************************************************************************************************
* Name: up_lcdinitialize
*
* Description:
* Initialize the LCD video hardware. The initial state of the LCD is fully initialized, display
* memory cleared, and the LCD ready to use, but with the power setting at 0 (full off).
*
****************************************************************************************************/
#ifdef CONFIG_LCD_MIO283QT2
int up_lcdinitialize(void);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_MIKROE_STM32F4_SRC_MIKROE_STM32F4_INTERNAL_H */
configs/mikroe-stm32f4/src/up_boot.c
+6
View File
@@ -71,6 +71,12 @@
void stm32_boardinitialize(void)
{
/* Configure GPIOs for controlling the LCD */
#ifdef CONFIG_LCD_MIO283QT2
stm32_lcdinitialize();
#endif
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
* stm32_spiinitialize() has been brought into the link.
*/
configs/mikroe-stm32f4/src/up_mio283qt2.c
+244 -232
View File
File diff suppressed because it is too large Load Diff
configs/mikroe-stm32f4/src/up_nsh.c
+13
View File
@@ -331,5 +331,18 @@ int nsh_archinitialize(void)
}
#endif
#ifdef CONFIG_LCD_MIO283QT2
/* Configure the TFT LCD module */
message("nsh_archinitialize: Initializing TFT LCD module\n");
ret = up_lcdinitialize();
if (ret != OK)
{
message("nsh_archinitialize: Failed to initialize TFT LCD module\n");
}
#endif
return OK;
}
configs/mikroe-stm32f4/usbnsh/defconfig
+2 -2
View File
@@ -208,6 +208,7 @@ CONFIG_STM32_SPI=y
# CONFIG_STM32_JTAG_FULL_ENABLE is not set
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
CONFIG_STM32_JTAG_SW_ENABLE=y
CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
# CONFIG_STM32_FORCEPOWER is not set
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=y
# CONFIG_STM32_CCMEXCLUDE is not set
@@ -427,7 +428,6 @@ CONFIG_MTD_SMART_SECTOR_SIZE=512
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERCOMM_CONSOLE is not set
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
CONFIG_SERIAL_REMOVABLE=y
@@ -643,7 +643,6 @@ CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_NX is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_SMART is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
# CONFIG_EXAMPLES_NXIMAGE is not set
@@ -660,6 +659,7 @@ CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_FLASH_TEST is not set
# CONFIG_EXAMPLES_SMART_TEST is not set
# CONFIG_EXAMPLES_SMART is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
drivers/lcd/Kconfig
+7
View File
@@ -182,6 +182,13 @@ config NOKIA6100_RGBORD
Required LCD driver settings:
endif
config LCD_MIO283QT2
bool "MIO283QT-2 TFT LCD Display Module"
default n
---help---
OLED Display Module, MIO283QT-2, Multi-Inno Technology, Co.
based on the Himax HX8347-D LCD controller.
config LCD_UG9664HSWAG01
bool "UG-9664HSWAG01 OLED Display Module"
default n