mirror of
https://github.com/apache/nuttx.git
synced 2026-05-20 04:16:35 +08:00
Gregory Nutt
File diff suppressed because it is too large
Load Diff
@@ -217,6 +217,8 @@
|
||||
#define USB_INT_ATTACH (1 << 6) /* Bit 6: Attach Interrupt */
|
||||
#define USB_INT_STALL (1 << 7) /* Bit 7: Stall Interrupt */
|
||||
|
||||
#define USB_INT_ALL 0xFF
|
||||
|
||||
/* Error Interrupt Status Register and Error Interrupt Enable Register (8-bit) */
|
||||
|
||||
#define USB_ERRSTAT_PIDERR (1 << 0) /* Bit 0: This bit is set when the PID check field fails */
|
||||
@@ -228,6 +230,8 @@
|
||||
/* Bit 6: Reserved */
|
||||
#define USB_ERRSTAT_BTSERR (1 << 7) /* Bit 7: Bit stuff error is detected */
|
||||
|
||||
#define USB_EINT_ALL 0xBF
|
||||
|
||||
/* Status Register (8-bit) */
|
||||
|
||||
/* Bits 0-1: Reserved */
|
||||
@@ -259,6 +263,7 @@
|
||||
#define USB_BDTPAGE1_MASK (0x7f << USB_BDTPAGE1_SHIFT)
|
||||
|
||||
/* Frame Number Register Low (8-bit, bits 0-7 of the 11 bit frame number) */
|
||||
#define USB_FRMNUML_MASK 0xFF
|
||||
/* Frame Number Register High (8-bit) */
|
||||
/* Bits 3-7: Reserved */
|
||||
#define USB_FRMNUMH_SHIFT (0) /* Bits 0-2: Bits 8-10 of the 11-bit frame number */
|
||||
@@ -313,9 +318,50 @@
|
||||
#define USB_USBTRC0_SYNC_DET (1 << 1) /* Bit 1: Synchronous USB Interrupt Detect */
|
||||
#define USB_USBTRC0_RESUME_INT (1 << 0) /* Bit 0: USB Asynchronous Interrupt */
|
||||
|
||||
/********************************************************************************************
|
||||
/* Buffer Descriptor Table (BDT) ****************************************************/
|
||||
/* Offset 0: On write (software->hardware) */
|
||||
|
||||
#define USB_BDT_STATUS_MASK 0xfc /* Bits 2-7: Status bits */
|
||||
#define USB_BDT_BSTALL (1 << 2) /* Bit 2: Buffer Stall Enable bit */
|
||||
#define USB_BDT_DTS (1 << 3) /* Bit 3: Data Toggle Synchronization Enable bit */
|
||||
#define USB_BDT_NINC (1 << 4) /* Bit 4: DMA Address Increment Disable bit */
|
||||
#define USB_BDT_KEEP (1 << 5) /* Bit 5: BD Keep Enable bit */
|
||||
#define USB_BDT_DATA01 (1 << 6) /* Bit 6: Data Toggle Packet bit */
|
||||
#define USB_BDT_UOWN (1 << 7) /* Bit 7: USB Own bit */
|
||||
#define USB_BDT_BYTECOUNT_SHIFT (16) /* Bits 16-25: Byte Count bits */
|
||||
#define USB_BDT_BYTECOUNT_MASK (0x3ff << USB_BDT_BYTECOUNT_SHIFT)
|
||||
|
||||
#define USB_BDT_DATA0 0 /* DATA0 packet expected next */
|
||||
#define USB_BDT_DATA1 USB_BDT_DATA01 /* DATA1 packet expected next */
|
||||
#define USB_BDT_COWN 0 /* CPU owns the descriptor */
|
||||
|
||||
/* Offset 0: On read (hardware->software) */
|
||||
|
||||
#define USB_BDT_PID_SHIFT (2) /* Bits 2-5: Packet Identifier bits */
|
||||
#define USB_BDT_PID_MASK (15 << USB_BDT_PID_SHIFT)
|
||||
/* Bit 7: USB Own bit (same) */
|
||||
/* Bits 16-25: Byte Count bits (same) */
|
||||
|
||||
/* Offset 4: BUFFER_ADDRESS, 32-bit Buffer Address bits */
|
||||
|
||||
#define USB_BDT_BYTES_SIZE 8 /* Eight bytes per BDT */
|
||||
#define USB_BDT_WORD_SIZE 2 /* Two 32-bit words per BDT */
|
||||
#define USB_NBDTS_PER_EP 4 /* Number of BDTS per endpoint: IN/OUT and EVEN/ODD */
|
||||
|
||||
/************************************************************************************
|
||||
* Public Types
|
||||
********************************************************************************************/
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/* Buffer Descriptor Status Register layout. */
|
||||
|
||||
struct usbotg_bdtentry_s
|
||||
{
|
||||
uint32_t status; /* Status, byte count, and PID */
|
||||
uint8_t *addr; /* Buffer address */
|
||||
};
|
||||
#endif
|
||||
|
||||
/********************************************************************************************
|
||||
* Public Data
|
||||
@@ -325,4 +371,9 @@
|
||||
* Public Functions
|
||||
********************************************************************************************/
|
||||
|
||||
struct usbdev_s;
|
||||
int kinetis_usbpullup(FAR struct usbdev_s *dev, bool enable);
|
||||
void kinetis_usbsuspend(FAR struct usbdev_s *dev, bool resume);
|
||||
void khci_usbattach(void);
|
||||
|
||||
#endif /* __ARCH_ARM_SRC_KINETIS_KINETIS_USBOTG_H */
|
||||
|
||||
@@ -43,6 +43,9 @@ CSRCS += k20_autoleds.c
|
||||
else
|
||||
CSRCS += k20_userleds.c
|
||||
endif
|
||||
ifeq ($(CONFIG_KINETIS_USBOTG),y)
|
||||
CSRCS += k20_usbdev.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_LIB_BOARDCTL),y)
|
||||
CSRCS += k20_appinit.c
|
||||
|
||||
@@ -38,7 +38,7 @@
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <sys/types.h>
|
||||
#include <nuttx/board.h>
|
||||
|
||||
#include "teensy-3x.h"
|
||||
@@ -74,5 +74,11 @@
|
||||
|
||||
int board_app_initialize(uintptr_t arg)
|
||||
{
|
||||
#ifdef CONFIG_USBDEV
|
||||
/* Teensy is powered from usb and (bug?) only boots from being programmed,
|
||||
* so if usb is compiled in signal the controller driver that we're attached now.
|
||||
*/
|
||||
khci_usbattach();
|
||||
#endif
|
||||
return OK;
|
||||
}
|
||||
|
||||
@@ -0,0 +1,133 @@
|
||||
/************************************************************************************
|
||||
* configs/teensy-3.x/src/k20_usbdev.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <sys/types.h>
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/usb/usbdev.h>
|
||||
#include <nuttx/usb/usbdev_trace.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "kinetis.h"
|
||||
#include "kinetis_usbotg.h"
|
||||
#include "kinetis_sim.h"
|
||||
#include "teensy-3x.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
#define khci_getreg(addr) getreg8(addr)
|
||||
#define khci_putreg(val,addr) putreg8(val,addr)
|
||||
#define SIM_CLKDIV2_USBDIV(n) (uint32_t)(((n) & 0x07) << 1)
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: kinetis_usbinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to setup USB-related GPIO pins for the KwikStik-K40 board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void kinetis_usbinitialize(void)
|
||||
{
|
||||
uint32_t regval;
|
||||
|
||||
// khci_usbattach();
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Name: kinetis_usbpullup
|
||||
*
|
||||
* Description:
|
||||
* If USB is supported and the board supports a pullup via GPIO (for USB software
|
||||
* connect and disconnect), then the board software must provide kinetis_pullup.
|
||||
* See include/nuttx/usb/usbdev.h for additional description of this method.
|
||||
* Alternatively, if no pull-up GPIO the following EXTERN can be redefined to be
|
||||
* NULL.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
int kinetis_usbpullup(FAR struct usbdev_s *dev, bool enable)
|
||||
{
|
||||
usbtrace(TRACE_DEVPULLUP, (uint16_t)enable);
|
||||
uint32_t regval;
|
||||
if (enable)
|
||||
khci_putreg(USB_CONTROL_DPPULLUPNONOTG, KINETIS_USB0_CONTROL);
|
||||
else
|
||||
khci_putreg(0,KINETIS_USB0_CONTROL);
|
||||
#if 0
|
||||
regval = khci_getreg(KINETIS_USB0_OTGCTL);
|
||||
if (enable)
|
||||
regval |= (1<<2);
|
||||
else
|
||||
regval &= ~(1<<2);
|
||||
khci_putreg(regval,KINETIS_USB0_OTGCTL);
|
||||
#endif
|
||||
|
||||
return OK;
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Name: kinetis_usbsuspend
|
||||
*
|
||||
* Description:
|
||||
* Board logic must provide the kinetis_usbsuspend logic if the USBDEV driver is
|
||||
* used. This function is called whenever the USB enters or leaves suspend mode.
|
||||
* This is an opportunity for the board logic to shutdown clocks, power, etc.
|
||||
* while the USB is suspended.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void kinetis_usbsuspend(FAR struct usbdev_s *dev, bool resume)
|
||||
{
|
||||
ulldbg("resume: %d\n", resume);
|
||||
#warning "Missing logic"
|
||||
}
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,117 @@
|
||||
############################################################################
|
||||
# configs/teensy-3.1/nsh/Make.defs
|
||||
#
|
||||
# Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
ifeq ($(CONFIG_ARCH_CHIP_MK20DX256VLH7),y)
|
||||
LDSCRIPT = mk20dx256vlh7.ld
|
||||
else ifeq ($(CONFIG_ARCH_CHIP_MK20DX128VLH5),y)
|
||||
LDSCRIPT = mk20dx128vlh5.ld
|
||||
endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mkwindeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(ARCROSSDEV)ar rcs
|
||||
NM = $(ARCROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
||||
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
|
||||
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
ASMEXT = .S
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
Executable
+80
@@ -0,0 +1,80 @@
|
||||
#!/bin/bash
|
||||
# configs/teensy-3.1/nsh/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the RIDE
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the RIDE toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
# export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
# export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
|
||||
# This is the location where I installed the ARM "GNU Tools for ARM Embedded Processors"
|
||||
# You can this free toolchain here https://launchpad.net/gcc-arm-embedded
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/GNU Tools ARM Embedded/4.9 2015q2/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH variable
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
Reference in New Issue
Block a user