mirror of
https://github.com/apache/nuttx.git
synced 2026-06-04 23:03:27 +08:00
copy nucleo-144 to stm32f746-ws
This commit is contained in:
pkolesnikov
@@ -0,0 +1,8 @@
|
||||
#
|
||||
# For a description of the syntax of this configuration file,
|
||||
# see the file kconfig-language.txt in the NuttX tools repository.
|
||||
#
|
||||
|
||||
if ARCH_BOARD_STM32F746_WS
|
||||
|
||||
endif # ARCH_BOARD_STM32F746_WS
|
||||
@@ -0,0 +1,237 @@
|
||||
/************************************************************************************
|
||||
* configs/stm32f746-ws/include/board.h
|
||||
*
|
||||
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
* Author: Mark Olsson <post@markolsson.se>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __CONFIG_STM32F746_WS_INCLUDE_BOARD_H
|
||||
#define __CONFIG_STM32F746_WS_INCLUDE_BOARD_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
# include <stdint.h>
|
||||
#endif
|
||||
|
||||
#ifdef __KERNEL__
|
||||
#include "stm32_rcc.h"
|
||||
#ifdef CONFIG_STM32F7_SDMMC1
|
||||
# include "stm32_sdmmc.h"
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Clocking *************************************************************************/
|
||||
/* The STM32F7 Discovery board provides the following clock sources:
|
||||
*
|
||||
* X1: 24 MHz oscillator for USB OTG HS PHY and camera module (daughter board)
|
||||
* X2: 25 MHz oscillator for STM32F746NGH6 microcontroller and Ethernet PHY.
|
||||
* X3: 32.768 KHz crystal for STM32F746NGH6 embedded RTC
|
||||
*
|
||||
* So we have these clock source available within the STM32
|
||||
*
|
||||
* HSI: 16 MHz RC factory-trimmed
|
||||
* LSI: 32 KHz RC
|
||||
* HSE: On-board crystal frequency is 25MHz
|
||||
* LSE: 32.768 kHz
|
||||
*/
|
||||
|
||||
#define STM32_BOARD_XTAL 8000000ul
|
||||
|
||||
#define STM32_HSI_FREQUENCY 16000000ul
|
||||
#define STM32_LSI_FREQUENCY 32000
|
||||
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
||||
#define STM32_LSE_FREQUENCY 32768
|
||||
|
||||
/* Main PLL Configuration.
|
||||
*
|
||||
* PLL source is HSE = 8,000,000
|
||||
*
|
||||
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
|
||||
* Subject to:
|
||||
*
|
||||
* 2 <= PLLM <= 63
|
||||
* 192 <= PLLN <= 432
|
||||
* 192 MHz <= PLL_VCO <= 432MHz
|
||||
*
|
||||
* SYSCLK = PLL_VCO / PLLP
|
||||
* Subject to
|
||||
*
|
||||
* PLLP = {2, 4, 6, 8}
|
||||
* SYSCLK <= 216 MHz
|
||||
*
|
||||
* USB OTG FS, SDMMC and RNG Clock = PLL_VCO / PLLQ
|
||||
* Subject to
|
||||
* The USB OTG FS requires a 48 MHz clock to work correctly. The SDMMC
|
||||
* and the random number generator need a frequency lower than or equal
|
||||
* to 48 MHz to work correctly.
|
||||
*
|
||||
* 2 <= PLLQ <= 15
|
||||
*/
|
||||
|
||||
/* Highest SYSCLK with USB OTG FS clock <= 48MHz
|
||||
*
|
||||
* PLL_VCO = (8,000,000 / 8) * 432 = 432 MHz
|
||||
* SYSCLK = 432 MHz / 2 = 216 MHz
|
||||
* USB OTG FS, SDMMC and RNG Clock = 432 MHz / 9 = 48 MHz
|
||||
*/
|
||||
|
||||
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(8)
|
||||
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(432)
|
||||
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
|
||||
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(9)
|
||||
|
||||
#define STM32_VCO_FREQUENCY ((STM32_HSE_FREQUENCY / 8) * 432)
|
||||
#define STM32_SYSCLK_FREQUENCY (STM32_VCO_FREQUENCY / 2)
|
||||
#define STM32_OTGFS_FREQUENCY (STM32_VCO_FREQUENCY / 9)
|
||||
|
||||
/* Several prescalers allow the configuration of the two AHB buses, the
|
||||
* high-speed APB (APB2) and the low-speed APB (APB1) domains. The maximum
|
||||
* frequency of the two AHB buses is 216 MHz while the maximum frequency of
|
||||
* the high-speed APB domains is 108 MHz. The maximum allowed frequency of
|
||||
* the low-speed APB domain is 54 MHz.
|
||||
*/
|
||||
|
||||
/* AHB clock (HCLK) is SYSCLK (216 MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
||||
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
||||
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
||||
|
||||
/* APB1 clock (PCLK1) is HCLK/4 (54 MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
|
||||
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
|
||||
|
||||
/* Timers driven from APB1 will be twice PCLK1 */
|
||||
|
||||
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
|
||||
/* APB2 clock (PCLK2) is HCLK/2 (108MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
|
||||
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
||||
|
||||
/* Timers driven from APB2 will be twice PCLK2 */
|
||||
|
||||
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
|
||||
/* FLASH wait states
|
||||
*
|
||||
* --------- ---------- -----------
|
||||
* VDD MAX SYSCLK WAIT STATES
|
||||
* --------- ---------- -----------
|
||||
* 1.7-2.1 V 180 MHz 8
|
||||
* 2.1-2.4 V 216 MHz 9
|
||||
* 2.4-2.7 V 216 MHz 8
|
||||
* 2.7-3.6 V 216 MHz 7
|
||||
* --------- ---------- -----------
|
||||
*/
|
||||
|
||||
#define BOARD_FLASH_WAITSTATES 7
|
||||
|
||||
/* Alternate function pin selections ************************************************/
|
||||
|
||||
/* USART6:
|
||||
*
|
||||
* These configurations assume that you are using a standard Arduio RS-232 shield
|
||||
* with the serial interface with RX on pin D0 and TX on pin D1:
|
||||
*
|
||||
* -------- ---------------
|
||||
* STM32F7
|
||||
* ARDUIONO FUNCTION GPIO
|
||||
* -- ----- --------- -----
|
||||
* DO RX USART6_RX PC7
|
||||
* D1 TX USART6_TX PC6
|
||||
* -- ----- --------- -----
|
||||
*/
|
||||
|
||||
#define GPIO_USART6_RX GPIO_USART6_RX_1
|
||||
#define GPIO_USART6_TX GPIO_USART6_TX_1
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
#define EXTERN extern "C"
|
||||
extern "C"
|
||||
{
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the initialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32_boardinitialize(void);
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIG_STM32F746_WS_INCLUDE_BOARD_H */
|
||||
@@ -0,0 +1,113 @@
|
||||
############################################################################
|
||||
# configs/stm32f746-ws/nsh/Make.defs
|
||||
#
|
||||
# Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
LDSCRIPT = flash.ld
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mkwindeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(ARCROSSDEV)ar rcs
|
||||
NM = $(ARCROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
||||
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
|
||||
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
ASMEXT = .S
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,77 @@
|
||||
#!/bin/bash
|
||||
# configs/stm32f746-ws/nsh/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the Atmel GCC
|
||||
# toolchain under Windows. You will also have to edit this if you install
|
||||
# this toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
# export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
|
||||
# This is the location where I installed the ARM "GNU Tools for ARM Embedded Processors"
|
||||
# You can this free toolchain here https://launchpad.net/gcc-arm-embedded
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Users/Public/tools/bin"
|
||||
|
||||
# This is the path to the location where I installed the devkitARM toolchain
|
||||
# You can get this free toolchain from http://devkitpro.org/ or http://sourceforge.net/projects/devkitpro/
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/devkitARM/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
# export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
@@ -0,0 +1,147 @@
|
||||
/****************************************************************************
|
||||
* configs/stm32f746-ws/scripts/flash.ld
|
||||
*
|
||||
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Modified 11/4/2013 for STM32F429 support
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The STM32F746NGH6 has 1024Kb of main FLASH memory. This FLASH memory can
|
||||
* be accessed from either the AXIM interface at address 0x0800:0000 or from
|
||||
* the ITCM interface at address 0x0020:0000.
|
||||
*
|
||||
* Additional information, including the option bytes, is available at at
|
||||
* FLASH at address 0x1ff0:0000 (AXIM) or 0x0010:0000 (ITCM).
|
||||
*
|
||||
* In the STM32F746NGH6, two different boot spaces can be selected through
|
||||
* the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
|
||||
* BOOT_ADD1 option bytes:
|
||||
*
|
||||
* 1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
|
||||
* ST programmed value: Flash on ITCM at 0x0020:0000
|
||||
* 2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
|
||||
* ST programmed value: System bootloader at 0x0010:0000
|
||||
*
|
||||
* NuttX does not modify these option byes. On the unmodified STM32F746G
|
||||
* DISCO board, the BOOT0 pin is at ground so by default, the STM32 will boot
|
||||
* to address 0x0020:0000 in ITCM FLASH.
|
||||
*
|
||||
* The STM32F746NGH6 also has 320Kb of data SRAM (in addition to ITCM SRAM).
|
||||
* SRAM is split up into three blocks:
|
||||
*
|
||||
* 1) 64Kb of DTCM SRM beginning at address 0x2000:0000
|
||||
* 2) 240Kb of SRAM1 beginning at address 0x2001:0000
|
||||
* 3) 16Kb of SRAM2 beginning at address 0x2004:c000
|
||||
*
|
||||
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
|
||||
* where the code expects to begin execution by jumping to the entry point in
|
||||
* the 0x0800:0000 address range.
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
itcm (rwx) : ORIGIN = 0x00200000, LENGTH = 1024K
|
||||
flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
|
||||
dtcm (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
|
||||
sram1 (rwx) : ORIGIN = 0x20010000, LENGTH = 240K
|
||||
sram2 (rwx) : ORIGIN = 0x2004c000, LENGTH = 16K
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
EXTERN(_vectors)
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
*(.init_array .init_array.*)
|
||||
_einit = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > flash
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > flash
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram1 AT > flash
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram1
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
@@ -0,0 +1,109 @@
|
||||
/****************************************************************************
|
||||
* configs/stm32f746-ws/scripts/kernel-space.ld
|
||||
*
|
||||
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* NOTE: This depends on the memory.ld script having been included prior to
|
||||
* this script.
|
||||
*/
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > kflash
|
||||
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
*(.init_array .init_array.*)
|
||||
_einit = ABSOLUTE(.);
|
||||
} > kflash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > kflash
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > kflash
|
||||
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > ksram AT > kflash
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > ksram
|
||||
|
||||
/* Stabs debugging sections */
|
||||
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
@@ -0,0 +1,129 @@
|
||||
/****************************************************************************
|
||||
* configs/stm32f746-ws/scripts/memory.ld
|
||||
*
|
||||
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The STM32F746NGH6 has 1024Kb of main FLASH memory. This FLASH memory can
|
||||
* be accessed from either the AXIM interface at address 0x0800:0000 or from
|
||||
* the ITCM interface at address 0x0020:0000.
|
||||
*
|
||||
* Additional information, including the option bytes, is available at at
|
||||
* FLASH at address 0x1ff0:0000 (AXIM) or 0x0010:0000 (ITCM).
|
||||
*
|
||||
* In the STM32F746NGH6, two different boot spaces can be selected through
|
||||
* the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
|
||||
* BOOT_ADD1 option bytes:
|
||||
*
|
||||
* 1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
|
||||
* ST programmed value: Flash on ITCM at 0x0020:0000
|
||||
* 2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
|
||||
* ST programmed value: System bootloader at 0x0010:0000
|
||||
*
|
||||
* NuttX does not modify these option byes. On the unmodified STM32F746G
|
||||
* DISCO board, the BOOT0 pin is at ground so by default, the STM32 will boot
|
||||
* to address 0x0020:0000 in ITCM FLASH.
|
||||
*
|
||||
* The STM32F746NGH6 also has 320Kb of data SRAM (in addition to ITCM SRAM).
|
||||
* SRAM is split up into three blocks:
|
||||
*
|
||||
* 1) 64Kb of DTCM SRM beginning at address 0x2000:0000
|
||||
* 2) 240Kb of SRAM1 beginning at address 0x2001:0000
|
||||
* 3) 16Kb of SRAM2 beginning at address 0x2004:c000
|
||||
*
|
||||
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
|
||||
* where the code expects to begin execution by jumping to the entry point in
|
||||
* the 0x0800:0000 address range.
|
||||
*
|
||||
* For MPU support, the kernel-mode NuttX section is assumed to be 128Kb of
|
||||
* FLASH and 4Kb of SRAM. That is an excessive amount for the kernel which
|
||||
* should fit into 64KB and, of course, can be optimized as needed (See
|
||||
* also configs/stm32f746g-disco/scripts/kernel-space.ld). Allowing the
|
||||
* additional does permit addition debug instrumentation to be added to the
|
||||
* kernel space without overflowing the partition.
|
||||
*
|
||||
* Alignment of the user space FLASH partition is also a critical factor:
|
||||
* The user space FLASH partition will be spanned with a single region of
|
||||
* size 2**n bytes. The alignment of the user-space region must be the same.
|
||||
* As a consequence, as the user-space increases in size, the alignment
|
||||
* requirement also increases.
|
||||
*
|
||||
* This alignment requirement means that the largest user space FLASH region
|
||||
* you can have will be 512KB at it would have to be positioned at
|
||||
* 0x08800000. If you change this address, don't forget to change the
|
||||
* CONFIG_NUTTX_USERSPACE configuration setting to match and to modify
|
||||
* the check in kernel/userspace.c.
|
||||
*
|
||||
* For the same reasons, the maximum size of the SRAM mapping is limited to
|
||||
* 4KB. Both of these alignment limitations could be reduced by using
|
||||
* multiple regions to map the FLASH/SDRAM range or perhaps with some
|
||||
* clever use of subregions.
|
||||
*
|
||||
* A detailed memory map for the 112KB SRAM region is as follows:
|
||||
*
|
||||
* 0x20001 0000: Kernel .data region. Typical size: 0.1KB
|
||||
* ------- ---- Kernel .bss region. Typical size: 1.8KB
|
||||
* 0x20001 0800: Kernel IDLE thread stack (approximate). Size is
|
||||
* determined by CONFIG_IDLETHREAD_STACKSIZE and
|
||||
* adjustments for alignment. Typical is 1KB.
|
||||
* ------- ---- Padded to 4KB
|
||||
* 0x20001 1000: User .data region. Size is variable.
|
||||
* ------- ---- User .bss region Size is variable.
|
||||
* 0x20001 2000: Beginning of kernel heap. Size determined by
|
||||
* CONFIG_MM_KERNEL_HEAPSIZE.
|
||||
* ------- ---- Beginning of user heap. Can vary with other settings.
|
||||
* 0x20004 c000: End+1 of SRAM1
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
/* ITCM boot address */
|
||||
|
||||
itcm (rwx) : ORIGIN = 0x00200000, LENGTH = 1024K
|
||||
|
||||
/* 1024KB FLASH */
|
||||
|
||||
kflash (rx) : ORIGIN = 0x08000000, LENGTH = 128K
|
||||
uflash (rx) : ORIGIN = 0x08020000, LENGTH = 128K
|
||||
xflash (rx) : ORIGIN = 0x08040000, LENGTH = 768K
|
||||
|
||||
/* 240KB of contiguous SRAM1 */
|
||||
|
||||
ksram (rwx) : ORIGIN = 0x20010000, LENGTH = 4K
|
||||
usram (rwx) : ORIGIN = 0x20011000, LENGTH = 4K
|
||||
xsram (rwx) : ORIGIN = 0x20012000, LENGTH = 240K - 8K
|
||||
|
||||
/* DTCM SRAM */
|
||||
|
||||
dtcm (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
|
||||
sram2 (rwx) : ORIGIN = 0x2004c000, LENGTH = 16K
|
||||
}
|
||||
@@ -0,0 +1,111 @@
|
||||
/****************************************************************************
|
||||
* configs/stm32f746-ws/scripts/user-space.ld
|
||||
*
|
||||
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* NOTE: This depends on the memory.ld script having been included prior to
|
||||
* this script.
|
||||
*/
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
SECTIONS
|
||||
{
|
||||
.userspace : {
|
||||
*(.userspace)
|
||||
} > uflash
|
||||
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > uflash
|
||||
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
*(.init_array .init_array.*)
|
||||
_einit = ABSOLUTE(.);
|
||||
} > uflash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > uflash
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > uflash
|
||||
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > usram AT > uflash
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > usram
|
||||
|
||||
/* Stabs debugging sections */
|
||||
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
@@ -0,0 +1,2 @@
|
||||
/.depend
|
||||
/Make.dep
|
||||
@@ -0,0 +1,45 @@
|
||||
############################################################################
|
||||
# configs/stm32f746-ws/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
ASRCS =
|
||||
CSRCS = stm32_boot.c stm32_spi.c
|
||||
|
||||
ifeq ($(CONFIG_LIB_BOARDCTL),y)
|
||||
CSRCS += stm32_appinitialize.c
|
||||
endif
|
||||
|
||||
include $(TOPDIR)/configs/Board.mk
|
||||
@@ -0,0 +1,65 @@
|
||||
/****************************************************************************
|
||||
* config/stm32f746-ws/src/stm32_appinitilaize.c
|
||||
*
|
||||
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
* Author: Mark Olsson <post@markolsson.se>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <syslog.h>
|
||||
|
||||
#include "stm32f746-ws.h"
|
||||
#include <nuttx/leds/userled.h>
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_app_initialize
|
||||
*
|
||||
* Description:
|
||||
* Perform application specific initialization. This function is never
|
||||
* called directly from application code, but only indirectly via the
|
||||
* (non-standard) boardctl() interface using the command BOARDIOC_INIT.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
int board_app_initialize(void)
|
||||
{
|
||||
|
||||
return OK;
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
/************************************************************************************
|
||||
* configs/stm32f746-ws/src/stm32_boot.c
|
||||
*
|
||||
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/board.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "stm32f746-ws.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the initialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32_boardinitialize(void)
|
||||
{
|
||||
#if defined(CONFIG_STM32F7_SPI1) || defined(CONFIG_STM32F7_SPI2) || \
|
||||
defined(CONFIG_STM32F7_SPI3) || defined(CONFIG_STM32F7_SPI4) || \
|
||||
defined(CONFIG_STM32F7_SPI5) || defined(CONFIG_STM32F7_SPI6)
|
||||
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
|
||||
* stm32_spidev_initialize() has been brought into the link.
|
||||
*/
|
||||
|
||||
if (stm32_spidev_initialize)
|
||||
{
|
||||
stm32_spidev_initialize();
|
||||
}
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Name: board_initialize
|
||||
*
|
||||
* Description:
|
||||
* If CONFIG_BOARD_INITIALIZE is selected, then an additional initialization call
|
||||
* will be performed in the boot-up sequence to a function called
|
||||
* board_initialize(). board_initialize() will be called immediately after
|
||||
* up_initialize() is called and just before the initial application is started.
|
||||
* This additional initialization phase may be used, for example, to initialize
|
||||
* board-specific device drivers.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_BOARD_INITIALIZE
|
||||
void board_initialize(void)
|
||||
{
|
||||
#if defined(CONFIG_NSH_LIBRARY) && !defined(CONFIG_LIB_BOARDCTL)
|
||||
/* Perform NSH initialization here instead of from the NSH. This
|
||||
* alternative NSH initialization is necessary when NSH is ran in user-space
|
||||
* but the initialization function must run in kernel space.
|
||||
*/
|
||||
|
||||
(void)board_app_initialize();
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
@@ -0,0 +1,238 @@
|
||||
/************************************************************************************
|
||||
* configs/nucleo-144/src/stm32_spi.c
|
||||
*
|
||||
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
* Authors: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <errno.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/spi/spi.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "chip.h"
|
||||
#include "stm32_spi.h"
|
||||
|
||||
#include "nucleo-144.h"
|
||||
|
||||
#if defined(CONFIG_STM32F7_SPI1) || defined(CONFIG_STM32F7_SPI2) || \
|
||||
defined(CONFIG_STM32F7_SPI3) || defined(CONFIG_STM32F7_SPI4) || \
|
||||
defined(CONFIG_STM32F7_SPI5)
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_DEBUG_SPI
|
||||
# define spidbg lldbg
|
||||
# ifdef SPI_VERBOSE
|
||||
# define spivdbg lldbg
|
||||
# else
|
||||
# define spivdbg(x...)
|
||||
# endif
|
||||
#else
|
||||
# undef SPI_VERBOSE
|
||||
# define spidbg(x...)
|
||||
# define spivdbg(x...)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_spidev_initialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the stm32f746g-disco board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void weak_function stm32_spidev_initialize(void)
|
||||
{
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32_spi1/2/3/4/5select and stm32_spi1/2/3/4/5status
|
||||
*
|
||||
* Description:
|
||||
* The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be
|
||||
* provided by board-specific logic. They are implementations of the select
|
||||
* and status methods of the SPI interface defined by struct spi_ops_s (see
|
||||
* include/nuttx/spi/spi.h). All other methods (including stm32_spibus_initialize())
|
||||
* are provided by common STM32 logic. To use this common SPI logic on your
|
||||
* board:
|
||||
*
|
||||
* 1. Provide logic in stm32_boardinitialize() to configure SPI chip select
|
||||
* pins.
|
||||
* 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions in your
|
||||
* board-specific logic. These functions will perform chip selection and
|
||||
* status operations using GPIOs in the way your board is configured.
|
||||
* 3. Add a calls to stm32_spibus_initialize() in your low level application
|
||||
* initialization logic
|
||||
* 4. The handle returned by stm32_spibus_initialize() may then be used to bind the
|
||||
* SPI driver to higher level logic (e.g., calling
|
||||
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
|
||||
* the SPI MMC/SD driver).
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_STM32F7_SPI1
|
||||
void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}
|
||||
|
||||
uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32F7_SPI2
|
||||
void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}
|
||||
|
||||
uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32F7_SPI3
|
||||
void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}
|
||||
|
||||
uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32F7_SPI4
|
||||
void stm32_spi4select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}
|
||||
|
||||
uint8_t stm32_spi4status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32F7_SPI5
|
||||
void stm32_spi5select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}
|
||||
|
||||
uint8_t stm32_spi5status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32_spi1cmddata
|
||||
*
|
||||
* Description:
|
||||
* Set or clear the SH1101A A0 or SD1306 D/C n bit to select data (true)
|
||||
* or command (false). This function must be provided by platform-specific
|
||||
* logic. This is an implementation of the cmddata method of the SPI
|
||||
* interface defined by struct spi_ops_s (see include/nuttx/spi/spi.h).
|
||||
*
|
||||
* Input Parameters:
|
||||
*
|
||||
* spi - SPI device that controls the bus the device that requires the CMD/
|
||||
* DATA selection.
|
||||
* devid - If there are multiple devices on the bus, this selects which one
|
||||
* to select cmd or data. NOTE: This design restricts, for example,
|
||||
* one one SPI display per SPI bus.
|
||||
* cmd - true: select command; false: select data
|
||||
*
|
||||
* Returned Value:
|
||||
* None
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_SPI_CMDDATA
|
||||
#ifdef CONFIG_STM32F7_SPI1
|
||||
int stm32_spi1cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
|
||||
{
|
||||
return -ENODEV;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32F7_SPI2
|
||||
int stm32_spi2cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
|
||||
{
|
||||
return -ENODEV;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32F7_SPI3
|
||||
int stm32_spi3cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
|
||||
{
|
||||
return -ENODEV;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32F7_SPI4
|
||||
int stm32_spi4cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
|
||||
{
|
||||
return -ENODEV;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32F7_SPI5
|
||||
int stm32_spi5cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
|
||||
{
|
||||
return -ENODEV;
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* CONFIG_SPI_CMDDATA */
|
||||
#endif /* CONFIG_STM32F7_SPI1 || ... CONFIG_STM32F7_SPI5 */
|
||||
@@ -0,0 +1,106 @@
|
||||
/****************************************************************************************************
|
||||
* configs/stm32f746-ws/src/stm32f746-ws.h
|
||||
*
|
||||
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
* Author: Mark Olsson <post@markolsson.se>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************************************/
|
||||
|
||||
#ifndef __CONFIGS_STM32F746_WS_SRC_STM32F746_WS_H
|
||||
#define __CONFIGS_STM32F746_WS_SRC_STM32F746_WS_H
|
||||
|
||||
/****************************************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
#include <stdint.h>
|
||||
|
||||
/****************************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************************************/
|
||||
/* procfs File System */
|
||||
|
||||
#ifdef CONFIG_FS_PROCFS
|
||||
# ifdef CONFIG_NSH_PROC_MOUNTPOINT
|
||||
# define STM32_PROCFS_MOUNTPOINT CONFIG_NSH_PROC_MOUNTPOINT
|
||||
# else
|
||||
# define STM32_PROCFS_MOUNTPOINT "/proc"
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/* STM32F736G Discovery GPIOs ***********************************************************************/
|
||||
/* The STM32F746G-DISCO board has numerous LEDs but only one, LD1 located near the reset button, that
|
||||
* can be controlled by software (LD2 is a power indicator, LD3-6 indicate USB status, LD7 is
|
||||
* controlled by the ST-Link).
|
||||
*
|
||||
* LD1 is controlled by PI1 which is also the SPI2_SCK at the Arduino interface. One end of LD1 is
|
||||
* grounded so a high output on PI1 will illuminate the LED.
|
||||
*/
|
||||
|
||||
#define GPIO_LD1 (GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_50MHz | GPIO_OUTPUT_CLEAR | \
|
||||
GPIO_PORTB | GPIO_PIN0)
|
||||
#define GPIO_LD2 (GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_50MHz | GPIO_OUTPUT_CLEAR | \
|
||||
GPIO_PORTB | GPIO_PIN7)
|
||||
#define GPIO_LD3 (GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_50MHz | GPIO_OUTPUT_CLEAR | \
|
||||
GPIO_PORTB | GPIO_PIN14)
|
||||
|
||||
#define LED_DRIVER_PATH "/dev/userleds"
|
||||
|
||||
/* Pushbutton B1, labelled "User", is connected to GPIO PC13. A high value will be sensed when the
|
||||
* button is depressed. Note that the EXTI interrupt is configured.
|
||||
*/
|
||||
|
||||
#define GPIO_BTN_USER (GPIO_INPUT | GPIO_FLOAT | GPIO_EXTI | GPIO_PORTC | GPIO_PIN13)
|
||||
|
||||
/****************************************************************************************************
|
||||
* Public data
|
||||
****************************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/****************************************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************************************/
|
||||
|
||||
/****************************************************************************************************
|
||||
* Name: stm32_spidev_initialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the stm32f746g-disco board.
|
||||
*
|
||||
****************************************************************************************************/
|
||||
|
||||
void weak_function stm32_spidev_initialize(void);
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIGS_STM32F746_WS_SRC_STM32F746_WS_H */
|
||||
Reference in New Issue
Block a user