A little more work (but not much progress) on the PIC32 USB device driver

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4440 42af7a65-404d-4744-a932-0658087f49c3

configs/sure-pic32mx/README.txt

@@ -459,8 +459,32 @@ Where <subdir> is one of the following:
     Configures the NuttShell (nsh) located at apps/examples/nsh.  The
     Configuration enables only the serial NSH interface.
 
-    The examples/usbterm program can be included as an NSH built-in
-    function by defined the following in your .config file:
+    Several USB device configurations can be enabled and included
+    as NSH built-in built in functions.  All require the following
+    basic setup in your .config to enable USB device support:
+ 
+      CONFIG_USBEV=y          : Enable basic USB device support
+      CONFIG_PIC32MX_USBDEV=y : Enable PIC32 USB device support
 
-    CONFIG_USBEV=y          : Enable basic USB device support
-    CONFIG_PIC32MX_USBDEV=y : Enable PIC32 USB device support
+    examples/usbterm - This option can be enabled by uncommenting
+    the following line in the appconfig file:
+
+      CONFIGURED_APPS += examples/usbterm
+
+    And by enabling one of the USB serial devices:
+
+      CONFIG_PL2303=y         : Enable the Prolifics PL2303 emulation
+      CONFIG_CDCACM=y         : or the CDC/ACM serial driver (not both)
+
+    examples/cdcacm -  The examples/cdcacm program can be included as an 
+    function by uncommenting the following line in the appconfig file:
+    
+      CONFIGURED_APPS += examples/cdcacm
+
+    and defining the following in your .config file:
+
+      CONFIG_CDCACM=y         : Enable the CDCACM device
+
+    examples/usbstorage - There are some hooks in the appconfig file
+    to enable the USB mass storage device.  However, this device cannot
+    work until support for the SD card is also incorporated.

configs/sure-pic32mx/nsh/appconfig

@@ -33,32 +33,45 @@
 #
 ############################################################################
 
+############################################################################
 # Path to example in apps/examples containing the user_start entry point
+############################################################################
 
 CONFIGURED_APPS += examples/nsh
 
+############################################################################
 # The NSH application library
+############################################################################
 
 CONFIGURED_APPS += system/readline
 CONFIGURED_APPS += nshlib
 
-# Applications configured as an NX built-in commands
-
-ifeq ($(CONFIG_NET),y)
-CONFIGURED_APPS += netutils/uiplib
-CONFIGURED_APPS += netutils/resolv
-CONFIGURED_APPS += netutils/webclient
-CONFIGURED_APPS += netutils/tftpc
-endif
-
-ifeq ($(CONFIG_PWM),y)
-CONFIGURED_APPS += examples/pwm
-endif
-
-ifeq ($(CONFIG_CAN),y)
-CONFIGURED_APPS += examples/can
-endif
+############################################################################
+# USB device configurations
+############################################################################
 
 ifeq ($(CONFIG_PIC32MX_USBDEV),y)
-CONFIGURED_APPS += examples/usbterm
+
+# USB Mass Storage Class device configurations
+
+ifeq ($(CONFIG_USBMSC),y)
+#  Uncomment to enable the examples/usbstorage built-in
+#  CONFIGURED_APPS += examples/usbstorage
+endif
+
+# USB CDC/ACM serial device configurations
+
+ifeq ($(CONFIG_CDCACM),y)
+#  Uncomment to enable the examples/cdcacm built-in
+#  CONFIGURED_APPS += examples/cdcacm
+#  Uncomment the following to enable the examples/usbterm built-in
+#  CONFIGURED_APPS += examples/usbterm
+endif
+
+# Prolifics PL2303 emulation configurations
+
+ifeq ($(CONFIG_PL2303),y)
+#  Uncomment the following to enable the examples/usbterm built-in
+#  CONFIGURED_APPS += examples/usbterm
+endif
 endif

configs/sure-pic32mx/nsh/defconfig

@@ -225,6 +225,13 @@ CONFIG_UART2_PARITY=0
 CONFIG_UART1_2STOP=0
 CONFIG_UART2_2STOP=0
 
+#
+# PIC32MX-specific USB device setup
+#
+CONFIG_PIC32MX_USBDEV_REGDEBUG=n
+CONFIG_PIC32MX_USBDEV_BDTDEBUG=n
+CONFIG_PIC32MX_USBDEV_PINGPONG=n
+ 
 #
 # General build options
 #
@@ -349,7 +356,6 @@ CONFIG_DEBUG_VERBOSE=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_DEBUG_SCHED=n
 CONFIG_DEBUG_USB=n
-CONFIG_PIC32MX_USBDEV_REGDEBUG=n
 
 CONFIG_HAVE_CXX=n
 CONFIG_HAVE_CXXINITIALIZE=n
@@ -1031,6 +1037,37 @@ CONFIG_EXAMPLES_USBTERM_TRACETRANSFERS=n
 CONFIG_EXAMPLES_USBTERM_TRACECONTROLLER=n
 CONFIG_EXAMPLES_USBTERM_TRACEINTERRUPTS=n
 
+#
+# Settings for examples/cdcacm
+#
+# Configuration prequisites:
+#
+#   CONFIG_USBDEV=y         : USB device support must be enabled
+#   CONFIG_CDCACM=y         : The CDC/ACM driver must be built
+#   CONFIG_NSH_BUILTIN_APPS : NSH built-in application support must be enabled
+#
+# Configuration options specific to this example:
+#
+# CONFIG_EXAMPLES_CDCACM_DEVMINOR
+#  The minor number of the CDC/ACM device.
+# CONFIG_EXAMPLES_CDCACM_TRACEINIT
+#   Show initialization events
+# CONFIG_EXAMPLES_CDCACM_TRACECLASS
+#   Show class driver events
+# CONFIG_EXAMPLES_CDCACM_TRACETRANSFERS
+#   Show data transfer events
+# CONFIG_EXAMPLES_CDCACM_TRACECONTROLLER
+#   Show controller events
+# CONFIG_EXAMPLES_CDCACM_TRACEINTERRUPTS
+#   Show interrupt-related events.
+#
+CONFIG_EXAMPLES_CDCACM_DEVMINOR=0
+CONFIG_EXAMPLES_CDCACM_TRACEINIT=n
+CONFIG_EXAMPLES_CDCACM_TRACECLASS=n
+CONFIG_EXAMPLES_CDCACM_TRACETRANSFERS=n
+CONFIG_EXAMPLES_CDCACM_TRACECONTROLLER=n
+CONFIG_EXAMPLES_CDCACM_TRACEINTERRUPTS=n
+
 #
 # Stack and heap information
 #