mirror of
https://github.com/apache/nuttx.git
synced 2026-05-23 14:58:13 +08:00
Add nxlines configuratin for the Open1788
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5795 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
@@ -4458,5 +4458,13 @@
|
||||
* configs/twr-k60n512: Converted configurations to use the
|
||||
konfig-frontends tool (2013-03-25).
|
||||
* arch/arm/src/lpc17xx/lpc17_lcd.c: Add an LCD framebuffer drier
|
||||
for the LPC177x/8x family.
|
||||
|
||||
for the LPC177x/8x family (2103-3-26).
|
||||
* arch/arm/src/lpc17xx/lpc17_emc.c and
|
||||
configs/open1788/src/lpc17_sdraminitialize.c: Began testing the
|
||||
Open1788 SDRAM. The SDRAM is basically functional, but there are
|
||||
failures with the SDRAM is stressed by the memory test at
|
||||
apps/example/ramtest (SDRAM support and the RAM test can be configured
|
||||
into the base configs/open1788/nsh configuration as described in
|
||||
configs/open1788/READMT.txt (2103-3-27).
|
||||
* configs/open1788/nxlines: Add a configuration to test both the
|
||||
Open1788 LCD and SDRAM which is used as a framebuffer (2013-3-27).
|
||||
|
||||
@@ -393,7 +393,7 @@ CONFIGURATION
|
||||
nsh
|
||||
---
|
||||
Configures the NuttShell (nsh) located at examples/nsh. The
|
||||
Configuration enables both the serial NSH interface.
|
||||
Configuration enables only the serial NSH interface.
|
||||
|
||||
NOTES:
|
||||
|
||||
@@ -428,3 +428,30 @@ CONFIGURATION
|
||||
freely executed against the SRAM memory beginning at address
|
||||
0xa000:0000 (CS0).
|
||||
|
||||
nxlines
|
||||
-------
|
||||
Configures the graphics example located at examples/nsh. This
|
||||
configuration enables SDRAM to hold the LCD framebuffer and enables
|
||||
the LPC178x LCD driver in order to support the WaveShare 4.3 inch TFT
|
||||
panel.
|
||||
|
||||
NOTES:
|
||||
|
||||
1. This configuration uses the mconf-based configuration tool. To
|
||||
change this configuration using that tool, you should:
|
||||
|
||||
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
|
||||
and misc/tools//README.txt.
|
||||
|
||||
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||||
reconfiguration process.
|
||||
|
||||
2. Uses the older, OABI, buildroot toolchain. But that is easily
|
||||
reconfigured:
|
||||
|
||||
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot toolchain
|
||||
CONFIG_ARMV7M_OABI_TOOLCHAIN=y : Older, OABI toolchain
|
||||
|
||||
3. In this configuration, the SDRAM is not added to heap but is
|
||||
dedicated to supporting an LCD frame buffer at address 0xa0010000.
|
||||
|
||||
|
||||
@@ -0,0 +1,109 @@
|
||||
############################################################################
|
||||
# configs/open1788k/nxlines/Make.defs
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-m$(DELIM)Toolchain.defs
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
|
||||
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)ld.script}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)ld.script
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
Executable
+73
@@ -0,0 +1,73 @@
|
||||
#!/bin/bash
|
||||
# configs/open1788/nxlines/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
# export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# The open1788/tools directory
|
||||
export LPCTOOL_DIR="${WD}/configs/open1788/tools"
|
||||
|
||||
# Add the path to the toolchain and tools directory to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
@@ -75,6 +75,7 @@ CONFIG_ARCH="arm"
|
||||
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||
# CONFIG_ARCH_CHIP_SAM3U is not set
|
||||
CONFIG_ARCH_CHIP_STM32=y
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
@@ -87,8 +88,6 @@ CONFIG_ARCH_HAVE_CMNVECTOR=y
|
||||
# CONFIG_ARCH_FPU is not set
|
||||
CONFIG_ARCH_HAVE_MPU=y
|
||||
# CONFIG_ARMV7M_MPU is not set
|
||||
CONFIG_BOARD_LOOPSPERMSEC=16717
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
|
||||
#
|
||||
# ARMV7M Configuration Options
|
||||
@@ -124,6 +123,18 @@ CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
|
||||
# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F107VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F207IG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302CC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302RC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303CC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303RC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F405RG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F405VG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F405ZG is not set
|
||||
@@ -221,6 +232,10 @@ CONFIG_STM32_USART=y
|
||||
# USB Host Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# USB Device Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# External Memory Configuration
|
||||
#
|
||||
@@ -238,10 +253,14 @@ CONFIG_ARCH_HAVE_VFORK=y
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
CONFIG_ARCH_HAVE_RAMVECTORS=y
|
||||
# CONFIG_ARCH_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_BOARD_LOOPSPERMSEC=16717
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
CONFIG_DRAM_START=0x20000000
|
||||
CONFIG_DRAM_SIZE=114688
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
@@ -281,6 +300,7 @@ CONFIG_NSH_MMCSDMINOR=0
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
CONFIG_MSEC_PER_TICK=10
|
||||
CONFIG_RR_INTERVAL=200
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
@@ -296,7 +316,6 @@ CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
@@ -423,6 +442,7 @@ CONFIG_USART2_2STOP=0
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_SYSLOG_ENABLE is not set
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
@@ -433,6 +453,7 @@ CONFIG_USART2_2STOP=0
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_MULTIHEAP is not set
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=2
|
||||
# CONFIG_GRAN is not set
|
||||
@@ -467,6 +488,8 @@ CONFIG_LIB_HOMEDIR="/"
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_EXECFUNCS is not set
|
||||
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
@@ -475,8 +498,9 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
|
||||
#
|
||||
# Non-standard Helper Functions
|
||||
# Non-standard Library Support
|
||||
#
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
|
||||
#
|
||||
@@ -506,7 +530,6 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_CDCACM is not set
|
||||
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||
# CONFIG_EXAMPLES_CXXTEST is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
@@ -554,8 +577,9 @@ CONFIG_EXAMPLES_NSH=y
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_TIFF is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
@@ -585,11 +609,7 @@ CONFIG_EXAMPLES_NSH=y
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
|
||||
#
|
||||
# ModBus
|
||||
#
|
||||
|
||||
#
|
||||
# FreeModbus
|
||||
# FreeModBus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
@@ -648,6 +668,10 @@ CONFIG_NSH_NESTDEPTH=3
|
||||
# CONFIG_NSH_DISABLESCRIPT is not set
|
||||
# CONFIG_NSH_DISABLEBG is not set
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
|
||||
#
|
||||
# USB Trace Support
|
||||
#
|
||||
# CONFIG_NSH_CONDEV is not set
|
||||
# CONFIG_NSH_ARCHINIT is not set
|
||||
|
||||
@@ -673,6 +697,11 @@ CONFIG_NSH_CONSOLE=y
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# RAM Test
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTEST is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
@@ -698,3 +727,7 @@ CONFIG_READLINE_ECHO=y
|
||||
# Sysinfo
|
||||
#
|
||||
# CONFIG_SYSTEM_SYSINFO is not set
|
||||
|
||||
#
|
||||
# USB Monitor
|
||||
#
|
||||
|
||||
@@ -8,6 +8,14 @@ CONFIG_NUTTX_NEWCONFIG=y
|
||||
# Build Setup
|
||||
#
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
# CONFIG_HOST_LINUX is not set
|
||||
# CONFIG_HOST_OSX is not set
|
||||
CONFIG_HOST_WINDOWS=y
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
# CONFIG_WINDOWS_NATIVE is not set
|
||||
CONFIG_WINDOWS_CYGWIN=y
|
||||
# CONFIG_WINDOWS_MSYS is not set
|
||||
# CONFIG_WINDOWS_OTHER is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
@@ -61,26 +69,38 @@ CONFIG_ARCH="arm"
|
||||
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||
# CONFIG_ARCH_CHIP_IMX is not set
|
||||
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||
# CONFIG_ARCH_CHIP_LM3S is not set
|
||||
# CONFIG_ARCH_CHIP_LM is not set
|
||||
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||
# CONFIG_ARCH_CHIP_SAM3U is not set
|
||||
CONFIG_ARCH_CHIP_STM32=y
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
CONFIG_ARCH_CORTEXM4=y
|
||||
CONFIG_ARCH_FAMILY="armv7-m"
|
||||
CONFIG_ARCH_CHIP="stm32"
|
||||
# CONFIG_ARMV7M_USEBASEPRI is not set
|
||||
CONFIG_ARCH_HAVE_CMNVECTOR=y
|
||||
# CONFIG_ARMV7M_CMNVECTOR is not set
|
||||
# CONFIG_ARCH_FPU is not set
|
||||
CONFIG_ARCH_HAVE_MPU=y
|
||||
# CONFIG_ARMV7M_MPU is not set
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=16717
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
|
||||
#
|
||||
# ARMV7M Configuration Options
|
||||
#
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
|
||||
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
|
||||
# CONFIG_SERIAL_TERMIOS is not set
|
||||
|
||||
#
|
||||
@@ -105,6 +125,18 @@ CONFIG_BOARD_LOOPSPERMSEC=16717
|
||||
# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F107VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F207IG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302CC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302RC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303CC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303RC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F405RG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F405VG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F405ZG is not set
|
||||
@@ -115,13 +147,6 @@ CONFIG_ARCH_CHIP_STM32F407VG=y
|
||||
# CONFIG_ARCH_CHIP_STM32F407IE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407IG is not set
|
||||
CONFIG_STM32_STM32F40XX=y
|
||||
CONFIG_STM32_CODESOURCERYW=y
|
||||
# CONFIG_STM32_CODESOURCERYL is not set
|
||||
# CONFIG_STM32_ATOLLIC_LITE is not set
|
||||
# CONFIG_STM32_ATOLLIC_PRO is not set
|
||||
# CONFIG_STM32_DEVKITARM is not set
|
||||
# CONFIG_STM32_RAISONANCE is not set
|
||||
# CONFIG_STM32_BUILDROOT is not set
|
||||
# CONFIG_STM32_DFU is not set
|
||||
|
||||
#
|
||||
@@ -183,6 +208,7 @@ CONFIG_STM32_SPI=y
|
||||
#
|
||||
# Alternate Pin Mapping
|
||||
#
|
||||
# CONFIG_STM32_FLASH_PREFETCH is not set
|
||||
# CONFIG_STM32_JTAG_DISABLE is not set
|
||||
# CONFIG_STM32_JTAG_FULL_ENABLE is not set
|
||||
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
|
||||
@@ -191,6 +217,13 @@ CONFIG_STM32_JTAG_SW_ENABLE=y
|
||||
# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
|
||||
# CONFIG_STM32_CCMEXCLUDE is not set
|
||||
# CONFIG_STM32_FSMC_SRAM is not set
|
||||
CONFIG_STM32_USART=y
|
||||
|
||||
#
|
||||
# U[S]ART Configuration
|
||||
#
|
||||
# CONFIG_USART2_RS485 is not set
|
||||
# CONFIG_STM32_USART_SINGLEWIRE is not set
|
||||
|
||||
#
|
||||
# SPI Configuration
|
||||
@@ -202,16 +235,35 @@ CONFIG_STM32_JTAG_SW_ENABLE=y
|
||||
# USB Host Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# USB Device Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# External Memory Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
# CONFIG_ARCH_NOINTC is not set
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
# CONFIG_ARCH_DMA is not set
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
# CONFIG_ADDRENV is not set
|
||||
CONFIG_ARCH_HAVE_VFORK=y
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
CONFIG_ARCH_HAVE_RAMVECTORS=y
|
||||
# CONFIG_ARCH_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_BOARD_LOOPSPERMSEC=16717
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
CONFIG_DRAM_START=0x20000000
|
||||
CONFIG_DRAM_SIZE=114688
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
@@ -251,10 +303,12 @@ CONFIG_NSH_MMCSDMINOR=0
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
CONFIG_MSEC_PER_TICK=10
|
||||
CONFIG_RR_INTERVAL=200
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2011
|
||||
CONFIG_START_MONTH=12
|
||||
@@ -265,8 +319,8 @@ CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="nxlines_main"
|
||||
@@ -276,9 +330,15 @@ CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_PTHREAD is not set
|
||||
# CONFIG_DISABLE_SIGNALS is not set
|
||||
# CONFIG_DISABLE_MQUEUE is not set
|
||||
# CONFIG_DISABLE_MOUNTPOINT is not set
|
||||
# CONFIG_DISABLE_ENVIRON is not set
|
||||
CONFIG_DISABLE_POLL=y
|
||||
|
||||
#
|
||||
# Signal Numbers
|
||||
#
|
||||
CONFIG_SIG_SIGUSR1=1
|
||||
CONFIG_SIG_SIGUSR2=2
|
||||
CONFIG_SIG_SIGALARM=3
|
||||
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
@@ -298,7 +358,6 @@ CONFIG_PREALLOC_TIMERS=4
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||
CONFIG_USERMAIN_STACKSIZE=2048
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
@@ -307,6 +366,7 @@ CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_DISABLE_POLL=y
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
@@ -331,6 +391,7 @@ CONFIG_LCD_MAXPOWER=255
|
||||
# CONFIG_LCD_P14201 is not set
|
||||
# CONFIG_LCD_NOKIA6100 is not set
|
||||
# CONFIG_LCD_UG9664HSWAG01 is not set
|
||||
# CONFIG_LCD_ST7567 is not set
|
||||
# CONFIG_LCD_UG2864AMBAG01 is not set
|
||||
CONFIG_LCD_SSD1289=y
|
||||
CONFIG_SSD1289_PROFILE1=y
|
||||
@@ -390,14 +451,16 @@ CONFIG_USART2_2STOP=0
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
# CONFIG_FS_FAT is not set
|
||||
# CONFIG_DISABLE_MOUNTPOINT is not set
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
# CONFIG_FS_FAT is not set
|
||||
# CONFIG_FS_NXFFS is not set
|
||||
# CONFIG_FS_ROMFS is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_SYSLOG_ENABLE is not set
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
@@ -439,6 +502,7 @@ CONFIG_NXTK_BORDERCOLOR3=0xffdf
|
||||
# Font Selections
|
||||
#
|
||||
CONFIG_NXFONTS_CHARBITS=7
|
||||
# CONFIG_NXFONT_MONO5X8 is not set
|
||||
# CONFIG_NXFONT_SANS17X22 is not set
|
||||
# CONFIG_NXFONT_SANS20X26 is not set
|
||||
CONFIG_NXFONT_SANS23X27=y
|
||||
@@ -466,6 +530,7 @@ CONFIG_NXFONT_SANS22X29B=y
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_MULTIHEAP is not set
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=2
|
||||
# CONFIG_GRAN is not set
|
||||
@@ -474,13 +539,20 @@ CONFIG_MM_REGIONS=2
|
||||
# Binary Formats
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
# CONFIG_BINFMT_EXEPATH is not set
|
||||
# CONFIG_NXFLAT is not set
|
||||
# CONFIG_ELF is not set
|
||||
# CONFIG_BUILTIN is not set
|
||||
# CONFIG_PIC is not set
|
||||
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
|
||||
#
|
||||
# Standard C Library Options
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=64
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
@@ -492,6 +564,9 @@ CONFIG_LIB_HOMEDIR="/"
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_EXECFUNCS is not set
|
||||
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
@@ -499,9 +574,16 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
|
||||
#
|
||||
# Non-standard Library Support
|
||||
#
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
# CONFIG_C99_BOOL8 is not set
|
||||
CONFIG_HAVE_CXX=y
|
||||
CONFIG_HAVE_CXXINITIALIZE=y
|
||||
# CONFIG_CXX_NEWLONG is not set
|
||||
@@ -516,16 +598,14 @@ CONFIG_HAVE_CXXINITIALIZE=y
|
||||
#
|
||||
|
||||
#
|
||||
# Named Applications
|
||||
# Built-In Applications
|
||||
#
|
||||
# CONFIG_BUILTIN is not set
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_CDCACM is not set
|
||||
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||
# CONFIG_EXAMPLES_CXXTEST is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
@@ -536,12 +616,12 @@ CONFIG_HAVE_CXXINITIALIZE=y
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_NETTEST is not set
|
||||
# CONFIG_EXAMPLES_NSH is not set
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
@@ -566,6 +646,7 @@ CONFIG_EXAMPLES_NXLINES_BPP=16
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POLL is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
@@ -581,11 +662,11 @@ CONFIG_EXAMPLES_NXLINES_BPP=16
|
||||
# CONFIG_EXAMPLES_USBMSC is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
# CONFIG_EXAMPLES_WLAN is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_TIFF is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
@@ -615,11 +696,7 @@ CONFIG_EXAMPLES_NXLINES_BPP=16
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
|
||||
#
|
||||
# ModBus
|
||||
#
|
||||
|
||||
#
|
||||
# FreeModbus
|
||||
# FreeModBus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
@@ -641,6 +718,7 @@ CONFIG_NSH_LIBRARY=y
|
||||
# CONFIG_NSH_DISABLE_FREE is not set
|
||||
# CONFIG_NSH_DISABLE_GET is not set
|
||||
# CONFIG_NSH_DISABLE_HELP is not set
|
||||
# CONFIG_NSH_DISABLE_HEXDUMP is not set
|
||||
# CONFIG_NSH_DISABLE_IFCONFIG is not set
|
||||
# CONFIG_NSH_DISABLE_KILL is not set
|
||||
# CONFIG_NSH_DISABLE_LOSETUP is not set
|
||||
@@ -676,6 +754,10 @@ CONFIG_NSH_NESTDEPTH=3
|
||||
# CONFIG_NSH_DISABLESCRIPT is not set
|
||||
# CONFIG_NSH_DISABLEBG is not set
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
|
||||
#
|
||||
# USB Trace Support
|
||||
#
|
||||
# CONFIG_NSH_CONDEV is not set
|
||||
# CONFIG_NSH_ARCHINIT is not set
|
||||
|
||||
@@ -702,6 +784,11 @@ CONFIG_NSH_CONSOLE=y
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# RAM Test
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTEST is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
@@ -727,3 +814,7 @@ CONFIG_READLINE_ECHO=y
|
||||
# Sysinfo
|
||||
#
|
||||
# CONFIG_SYSTEM_SYSINFO is not set
|
||||
|
||||
#
|
||||
# USB Monitor
|
||||
#
|
||||
|
||||
+7
-7
@@ -41,7 +41,7 @@ config NX_WRITEONLY
|
||||
menu "Supported Pixel Depths"
|
||||
|
||||
config NX_DISABLE_1BPP
|
||||
bool "1 BPP"
|
||||
bool "Disable 1 BPP"
|
||||
default y
|
||||
---help---
|
||||
NX supports a variety of pixel depths. You can save some memory by disabling
|
||||
@@ -49,7 +49,7 @@ config NX_DISABLE_1BPP
|
||||
pixel depth.
|
||||
|
||||
config NX_DISABLE_2BPP
|
||||
bool "2 BPP"
|
||||
bool "Disable 2 BPP"
|
||||
default y
|
||||
---help---
|
||||
NX supports a variety of pixel depths. You can save some memory by disabling
|
||||
@@ -57,7 +57,7 @@ config NX_DISABLE_2BPP
|
||||
pixel depth.
|
||||
|
||||
config NX_DISABLE_4BPP
|
||||
bool "4 BPP"
|
||||
bool "Disable 4 BPP"
|
||||
default y
|
||||
---help---
|
||||
NX supports a variety of pixel depths. You can save some memory by disabling
|
||||
@@ -65,7 +65,7 @@ config NX_DISABLE_4BPP
|
||||
pixel depth.
|
||||
|
||||
config NX_DISABLE_8BPP
|
||||
bool "8 BPP"
|
||||
bool "Disable 8 BPP"
|
||||
default y
|
||||
---help---
|
||||
NX supports a variety of pixel depths. You can save some memory by disabling
|
||||
@@ -73,7 +73,7 @@ config NX_DISABLE_8BPP
|
||||
pixel depth.
|
||||
|
||||
config NX_DISABLE_16BPP
|
||||
bool "16 BPP"
|
||||
bool "Disable 16 BPP"
|
||||
default y
|
||||
---help---
|
||||
NX supports a variety of pixel depths. You can save some memory by disabling
|
||||
@@ -81,7 +81,7 @@ config NX_DISABLE_16BPP
|
||||
pixel depth.
|
||||
|
||||
config NX_DISABLE_24BPP
|
||||
bool "24 BPP"
|
||||
bool "Disable 24 BPP"
|
||||
default y
|
||||
---help---
|
||||
NX supports a variety of pixel depths. You can save some memory by disabling
|
||||
@@ -89,7 +89,7 @@ config NX_DISABLE_24BPP
|
||||
pixel depth.
|
||||
|
||||
config NX_DISABLE_32BPP
|
||||
bool "32 BPP"
|
||||
bool "Disable 32 BPP"
|
||||
default y
|
||||
---help---
|
||||
NX supports a variety of pixel depths. You can save some memory by disabling
|
||||
|
||||
Reference in New Issue
Block a user