rename up_led*() functions to board_led_*()

configs/16z/src/z16f_leds.c

@@ -93,20 +93,20 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
   /* All GPIO initialization is done in up_lowinit() */
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
 #if defined(HAVE_16Z_LED3) || defined(HAVE_16Z_LED4)
   /* The following operations must be atomic */
@@ -138,10 +138,10 @@ void up_ledon(int led)
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
 #if defined(HAVE_16Z_LED3) || defined(HAVE_16Z_LED4)
   /* The following operations must be atomic */

configs/arduino-due/src/arduino-due.h

@@ -321,11 +321,11 @@ void sam_sram_initialize(void);
 #endif
 
 /************************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ************************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void);
+void board_led_initialize(void);
 #endif
 
 /****************************************************************************

configs/arduino-due/src/sam_autoleds.c

@@ -116,10 +116,10 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
-void up_ledinit(void)
+void board_led_initialize(void)
 {
   /* Configure RX and TX LED GPIOs for output */
 
@@ -129,10 +129,10 @@ void up_ledinit(void)
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   switch (led)
     {
@@ -178,10 +178,10 @@ void up_ledon(int led)
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   switch (led)
     {

configs/arduino-due/src/sam_boot.c

@@ -70,6 +70,6 @@ void sam_boardinitialize(void)
 #ifdef CONFIG_ARCH_LEDS
   /* Configure on-board LEDs if LED support has been selected. */
 
-  up_ledinit();
+  board_led_initialize();
 #endif
 }

configs/avr32dev1/src/avr32dev1_internal.h

@@ -112,14 +112,14 @@
  ************************************************************************************/
 
 /************************************************************************************
- * Name: up_ledinitialize
+ * Name: board_led_initializeialize
  *
  * Description:
  *   Configure on-board LEDs if LED support has been selected.
  ************************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-extern void up_ledinitialize(void);
+extern void board_led_initializeialize(void);
 #endif
 
 #endif /* __ASSEMBLY__ */

configs/avr32dev1/src/up_boot.c

@@ -79,6 +79,6 @@ void up_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinitialize();
+  board_led_initializeialize();
 #endif
 }

configs/avr32dev1/src/up_leds.c

@@ -62,30 +62,30 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinitialize
+ * Name: board_led_initializeialize
  ****************************************************************************/
 
-void up_ledinitialize(void)
+void board_led_initializeialize(void)
 {
   at32uc3_configgpio(PINMUX_GPIO_LED1);
   at32uc3_configgpio(PINMUX_GPIO_LED2);
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   at32uc3_gpiowrite(PINMUX_GPIO_LED1, (led != 0));
   at32uc3_gpiowrite(PINMUX_GPIO_LED2, (led == 2));
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   at32uc3_gpiowrite(PINMUX_GPIO_LED1, (led == 2));
   at32uc3_gpiowrite(PINMUX_GPIO_LED2, false);

configs/c5471evm/src/up_leds.c

@@ -63,11 +63,11 @@ static uint32_t g_ledstate;
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
   /* Enable access to LEDs */
 
@@ -80,10 +80,10 @@ void up_ledinit(void)
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   if (led < 8)
     {
@@ -93,10 +93,10 @@ void up_ledon(int led)
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   if (led < 8)
     {

configs/cloudctrl/src/up_autoleds.c

@@ -354,11 +354,11 @@ static int led_pm_prepare(struct pm_callback_s *cb , enum pm_state_e pmstate)
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
    /* Configure LED1-4 GPIOs for output */
 
@@ -369,19 +369,19 @@ void up_ledinit(void)
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   led_setonoff(ON_BITS(g_ledbits[led]));
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   led_setonoff(OFF_BITS(g_ledbits[led]));
 }
@@ -398,7 +398,7 @@ void up_ledpminitialize(void)
   int ret = pm_register(&g_ledscb);
   if (ret != OK)
   {
-      up_ledon(LED_ASSERTION);
+      board_led_on(LED_ASSERTION);
     }
 }
 #endif /* CONFIG_PM */

configs/cloudctrl/src/up_boot.c

@@ -98,6 +98,6 @@ void stm32_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 }

configs/demo9s12ne64/src/demo9s12ne64.h

@@ -64,7 +64,7 @@
  * Public Functions
  ************************************************************************************/
 /************************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  *
  * Description:
  *   Configure and initialize on-board LEDs
@@ -72,7 +72,7 @@
  ************************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-extern void up_ledinit(void);
+extern void board_led_initialize(void);
 #endif
 
 /************************************************************************************

configs/demo9s12ne64/src/up_boot.c

@@ -84,6 +84,6 @@ void hcs12_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 }

configs/demo9s12ne64/src/up_leds.c

@@ -75,7 +75,7 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  *
  * Description:
  *   Configure and initialize on-board LEDs
@@ -83,23 +83,23 @@
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
 }
 

configs/ea3131/src/up_boot.c

@@ -118,7 +118,7 @@ void lpc31_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 
   /* Set up mass storage device to support on demand paging */

configs/ea3131/src/up_clkinit.c

@@ -439,6 +439,6 @@ const struct lpc31_clkinit_s g_boardclks =
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 

configs/ea3131/src/up_leds.c

@@ -80,27 +80,27 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
 }
 

configs/ea3152/src/up_boot.c

@@ -105,7 +105,7 @@ void lpc31_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 
   /* Set up mass storage device to support on demand paging */

configs/ea3152/src/up_clkinit.c

@@ -439,6 +439,6 @@ const struct lpc31_clkinit_s g_boardclks =
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 

configs/ea3152/src/up_leds.c

@@ -80,27 +80,27 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
 }
 

configs/eagle100/src/eagle100_internal.h

@@ -91,7 +91,7 @@
 extern void weak_function lm_ssiinitialize(void);
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  *
  * Description:
  *   Initialize on-board LEDs.
@@ -99,7 +99,7 @@ extern void weak_function lm_ssiinitialize(void);
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-extern void up_ledinit(void);
+extern void board_led_initialize(void);
 #endif
 
 #endif /* __ASSEMBLY__ */

configs/eagle100/src/up_boot.c

@@ -87,6 +87,6 @@ void lm_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 }

configs/eagle100/src/up_leds.c

@@ -90,7 +90,7 @@
 static uint8_t g_nest;
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  *
  * Description:
  *   Initialize on-board LEDs.
@@ -98,23 +98,23 @@ static uint8_t g_nest;
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
   leddbg("Initializing\n");
 
   /* Configure Port E, Bit 1 as an output, initial value=OFF */
 
-  led_dumpgpio("up_ledinit before lm_configgpio()");
+  led_dumpgpio("board_led_initialize before lm_configgpio()");
   lm_configgpio(LED_GPIO);
-  led_dumpgpio("up_ledinit after lm_configgpio()");
+  led_dumpgpio("board_led_initialize after lm_configgpio()");
   g_nest = 0;
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   switch (led)
     {
@@ -130,18 +130,18 @@ void up_ledon(int led)
         g_nest++;
       case LED_IRQSENABLED:
       case LED_STACKCREATED:
-        led_dumpgpio("up_ledon: before lm_gpiowrite()");
+        led_dumpgpio("board_led_on: before lm_gpiowrite()");
         lm_gpiowrite(LED_GPIO, false);
-        led_dumpgpio("up_ledon: after lm_gpiowrite()");
+        led_dumpgpio("board_led_on: after lm_gpiowrite()");
         break;
     }
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   switch (led)
     {
@@ -158,9 +158,9 @@ void up_ledoff(int led)
       case LED_PANIC:
         if (--g_nest <= 0)
           {
-            led_dumpgpio("up_ledoff: before lm_gpiowrite()");
+            led_dumpgpio("board_led_off: before lm_gpiowrite()");
             lm_gpiowrite(LED_GPIO, true);
-            led_dumpgpio("up_ledoff: after lm_gpiowrite()");
+            led_dumpgpio("board_led_off: after lm_gpiowrite()");
           }
         break;
     }

configs/ekk-lm3s9b96/src/up_boot.c

@@ -87,6 +87,6 @@ void lm_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 }

configs/ekk-lm3s9b96/src/up_leds.c

@@ -91,27 +91,27 @@
 static uint8_t g_nest;
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
   leddbg("Initializing\n");
 
   /* Configure Port D, Bit 0 as an output, initial value=OFF */
 
-  led_dumpgpio("up_ledinit before lm_configgpio()");
+  led_dumpgpio("board_led_initialize before lm_configgpio()");
   lm_configgpio(LED_GPIO);
-  led_dumpgpio("up_ledinit after lm_configgpio()");
+  led_dumpgpio("board_led_initialize after lm_configgpio()");
   g_nest = 0;
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   switch (led)
     {
@@ -127,18 +127,18 @@ void up_ledon(int led)
         g_nest++;
       case LED_IRQSENABLED:
       case LED_STACKCREATED:
-        led_dumpgpio("up_ledon: before lm_gpiowrite()");
+        led_dumpgpio("board_led_on: before lm_gpiowrite()");
         lm_gpiowrite(LED_GPIO, false);
-        led_dumpgpio("up_ledon: after lm_gpiowrite()");
+        led_dumpgpio("board_led_on: after lm_gpiowrite()");
         break;
     }
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   switch (led)
     {
@@ -155,9 +155,9 @@ void up_ledoff(int led)
       case LED_PANIC:
         if (--g_nest <= 0)
           {
-            led_dumpgpio("up_ledoff: before lm_gpiowrite()");
+            led_dumpgpio("board_led_off: before lm_gpiowrite()");
             lm_gpiowrite(LED_GPIO, true);
-            led_dumpgpio("up_ledoff: after lm_gpiowrite()");
+            led_dumpgpio("board_led_off: after lm_gpiowrite()");
           }
         break;
     }

configs/ez80f910200kitg/src/ez80_leds.c

@@ -63,27 +63,27 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
 }
 #endif /* CONFIG_ARCH_LEDS */

configs/ez80f910200zco/src/ez80_leds.c

@@ -212,11 +212,11 @@ static int8_t  g_intcount         = 0;
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
   g_currglyph  = g_chspace;
   g_prevglyph  = g_chspace;
@@ -225,10 +225,10 @@ void up_ledinit(void)
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   FAR const uint8_t *tmp = g_currglyph;
   switch (led)
@@ -277,10 +277,10 @@ void up_ledon(int led)
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   if (led == LED_INIRQ)
     {

configs/fire-stm32v2/src/up_autoleds.c

@@ -335,11 +335,11 @@ static int led_pm_prepare(struct pm_callback_s *cb , enum pm_state_e pmstate)
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
    /* Configure LED1-4 GPIOs for output */
 
@@ -349,19 +349,19 @@ void up_ledinit(void)
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   led_setonoff(ON_BITS(g_ledbits[led]));
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   led_setonoff(OFF_BITS(g_ledbits[led]));
 }
@@ -378,7 +378,7 @@ void up_ledpminitialize(void)
   int ret = pm_register(&g_ledscb);
   if (ret != OK)
   {
-      up_ledon(LED_ASSERTION);
+      board_led_on(LED_ASSERTION);
     }
 }
 #endif /* CONFIG_PM */

configs/fire-stm32v2/src/up_boot.c

@@ -97,6 +97,6 @@ void stm32_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 }

configs/freedom-kl25z/src/kl_led.c

@@ -133,10 +133,10 @@ void kl_ledinit(void)
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   if (led == LED_STACKCREATED)
     {
@@ -153,10 +153,10 @@ void up_ledon(int led)
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   if (led == LED_PANIC)
     {

configs/hymini-stm32v/src/up_boot.c

@@ -98,6 +98,6 @@ void stm32_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 }

configs/hymini-stm32v/src/up_leds.c

@@ -207,11 +207,11 @@ static void led_setonoff(unsigned int bits)
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
   /* Configure LED1 & LED2 GPIOs for output */
   stm32_configgpio(GPIO_LED1);
@@ -219,19 +219,19 @@ void up_ledinit(void)
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   led_setonoff(ON_BITS(g_ledbits[led]));
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   led_setonoff(OFF_BITS(g_ledbits[led]));
 }

configs/kwikstik-k40/src/kwikstik-internal.h

@@ -159,7 +159,7 @@
  ************************************************************************************/
 
 /************************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  *
  * Description:
  *   Initialize LED GPIOs so that LEDs can be controlled.
@@ -167,7 +167,7 @@
  ************************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-extern void up_ledinit(void);
+extern void board_led_initialize(void);
 #endif
 
 /************************************************************************************

configs/kwikstik-k40/src/up_boot.c

@@ -97,6 +97,6 @@ void kinetis_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 }

configs/kwikstik-k40/src/up_leds.c

@@ -71,7 +71,7 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  *
  * Description:
  *   Initialize LED GPIOs so that LEDs can be controlled.
@@ -79,25 +79,25 @@
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
   /* The KwikStik-K40 board has no MCU driven, GPIO-based LEDs */
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   /* The KwikStik-K40 board has no MCU driven, GPIO-based LEDs */
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   /* The KwikStik-K40 board has no MCU driven, GPIO-based LEDs */
 }

configs/lincoln60/src/up_boot.c

@@ -76,6 +76,6 @@ void lpc17_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 }

configs/lincoln60/src/up_leds.c

@@ -118,26 +118,26 @@ static int  g_nestcount;
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
-void up_ledinit(void)
+void board_led_initialize(void)
 {
   /* Configure all LED GPIO lines */
 
-  led_dumpgpio("up_ledinit() Entry)");
+  led_dumpgpio("board_led_initialize() Entry)");
 
   lpc17_configgpio(LINCOLN60_LED1);
   lpc17_configgpio(LINCOLN60_LED2);
 
-  led_dumpgpio("up_ledinit() Exit");
+  led_dumpgpio("board_led_initialize() Exit");
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   /* We will control LED1 and LED2 not yet completed the boot sequence. */
 
@@ -181,10 +181,10 @@ void up_ledon(int led)
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   /* In all states, OFF can only mean turning off the HB LED */
 

configs/lm3s6432-s2e/src/up_boot.c

@@ -92,7 +92,7 @@ void lm_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 
   /* Configure serial transciever */

configs/lm3s6432-s2e/src/up_leds.c

@@ -90,28 +90,28 @@
 static uint8_t g_nest;
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
   leddbg("Initializing\n");
 
   /* Configure Port F, Bit 2 as an output, initial value=OFF */
 
-  led_dumpgpio("up_ledinit before lm_configgpio()");
+  led_dumpgpio("board_led_initialize before lm_configgpio()");
   lm_configgpio(LED0_GPIO);
   lm_configgpio(LED1_GPIO);
-  led_dumpgpio("up_ledinit after lm_configgpio()");
+  led_dumpgpio("board_led_initialize after lm_configgpio()");
   g_nest = 0;
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   switch (led)
     {
@@ -127,18 +127,18 @@ void up_ledon(int led)
         g_nest++;
       case LED_IRQSENABLED:
       case LED_STACKCREATED:
-        led_dumpgpio("up_ledon: before lm_gpiowrite()");
+        led_dumpgpio("board_led_on: before lm_gpiowrite()");
         lm_gpiowrite(LED1_GPIO, false);
-        led_dumpgpio("up_ledon: after lm_gpiowrite()");
+        led_dumpgpio("board_led_on: after lm_gpiowrite()");
         break;
     }
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   switch (led)
     {
@@ -155,9 +155,9 @@ void up_ledoff(int led)
       case LED_PANIC:
         if (--g_nest <= 0)
           {
-            led_dumpgpio("up_ledoff: before lm_gpiowrite()");
+            led_dumpgpio("board_led_off: before lm_gpiowrite()");
             lm_gpiowrite(LED1_GPIO, true);
-            led_dumpgpio("up_ledoff: after lm_gpiowrite()");
+            led_dumpgpio("board_led_off: after lm_gpiowrite()");
           }
         break;
     }

configs/lm3s6965-ek/src/up_boot.c

@@ -88,6 +88,6 @@ void lm_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 }

configs/lm3s6965-ek/src/up_leds.c

@@ -90,27 +90,27 @@
 static uint8_t g_nest;
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
   leddbg("Initializing\n");
 
   /* Configure Port E, Bit 1 as an output, initial value=OFF */
 
-  led_dumpgpio("up_ledinit before lm_configgpio()");
+  led_dumpgpio("board_led_initialize before lm_configgpio()");
   lm_configgpio(LED_GPIO);
-  led_dumpgpio("up_ledinit after lm_configgpio()");
+  led_dumpgpio("board_led_initialize after lm_configgpio()");
   g_nest = 0;
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   switch (led)
     {
@@ -126,18 +126,18 @@ void up_ledon(int led)
         g_nest++;
       case LED_IRQSENABLED:
       case LED_STACKCREATED:
-        led_dumpgpio("up_ledon: before lm_gpiowrite()");
+        led_dumpgpio("board_led_on: before lm_gpiowrite()");
         lm_gpiowrite(LED_GPIO, false);
-        led_dumpgpio("up_ledon: after lm_gpiowrite()");
+        led_dumpgpio("board_led_on: after lm_gpiowrite()");
         break;
     }
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   switch (led)
     {
@@ -154,9 +154,9 @@ void up_ledoff(int led)
       case LED_PANIC:
         if (--g_nest <= 0)
           {
-            led_dumpgpio("up_ledoff: before lm_gpiowrite()");
+            led_dumpgpio("board_led_off: before lm_gpiowrite()");
             lm_gpiowrite(LED_GPIO, true);
-            led_dumpgpio("up_ledoff: after lm_gpiowrite()");
+            led_dumpgpio("board_led_off: after lm_gpiowrite()");
           }
         break;
     }

configs/lm3s8962-ek/src/up_boot.c

@@ -88,6 +88,6 @@ void lm_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 }

configs/lm3s8962-ek/src/up_leds.c

@@ -90,27 +90,27 @@
 static uint8_t g_nest;
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
   leddbg("Initializing\n");
 
   /* Configure Port E, Bit 1 as an output, initial value=OFF */
 
-  led_dumpgpio("up_ledinit before lm_configgpio()");
+  led_dumpgpio("board_led_initialize before lm_configgpio()");
   lm_configgpio(LED_GPIO);
-  led_dumpgpio("up_ledinit after lm_configgpio()");
+  led_dumpgpio("board_led_initialize after lm_configgpio()");
   g_nest = 0;
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   switch (led)
     {
@@ -126,18 +126,18 @@ void up_ledon(int led)
         g_nest++;
       case LED_IRQSENABLED:
       case LED_STACKCREATED:
-        led_dumpgpio("up_ledon: before lm_gpiowrite()");
+        led_dumpgpio("board_led_on: before lm_gpiowrite()");
         lm_gpiowrite(LED_GPIO, false);
-        led_dumpgpio("up_ledon: after lm_gpiowrite()");
+        led_dumpgpio("board_led_on: after lm_gpiowrite()");
         break;
     }
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   switch (led)
     {
@@ -154,9 +154,9 @@ void up_ledoff(int led)
       case LED_PANIC:
         if (--g_nest <= 0)
           {
-            led_dumpgpio("up_ledoff: before lm_gpiowrite()");
+            led_dumpgpio("board_led_off: before lm_gpiowrite()");
             lm_gpiowrite(LED_GPIO, true);
-            led_dumpgpio("up_ledoff: after lm_gpiowrite()");
+            led_dumpgpio("board_led_off: after lm_gpiowrite()");
           }
         break;
     }

configs/lm4f120-launchpad/src/lm4f_autoleds.c

@@ -152,10 +152,10 @@ void lm4f_ledinit(void)
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   switch (led)
     {
@@ -192,10 +192,10 @@ void up_ledon(int led)
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   switch (led)
     {

configs/lpc4330-xplorer/src/up_autoleds.c

@@ -136,14 +136,14 @@ static void led_dumppins(FAR const char *msg)
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
-void up_ledinit(void)
+void board_led_initialize(void)
 {
   /* Configure all LED pins as GPIO outputs */
 
-  led_dumppins("up_ledinit() Entry)");
+  led_dumppins("board_led_initialize() Entry)");
 
   /* Configure LED pins as GPIOs, then configure GPIOs as outputs */
 
@@ -153,14 +153,14 @@ void up_ledinit(void)
   lpc43_pin_config(PINCONFIG_LED2);
   lpc43_gpio_config(GPIO_LED2);
 
-  led_dumppins("up_ledinit() Exit");
+  led_dumppins("board_led_initialize() Exit");
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   switch (led)
     {
@@ -182,10 +182,10 @@ void up_ledon(int led)
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   switch (led)
     {

configs/lpc4330-xplorer/src/up_boot.c

@@ -76,6 +76,6 @@ void lpc43_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 }

configs/lpcxpresso-lpc1768/src/up_boot.c

@@ -88,6 +88,6 @@ void lpc17_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 }

configs/lpcxpresso-lpc1768/src/up_leds.c

@@ -86,10 +86,10 @@ static bool g_ncstate;
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
-void up_ledinit(void)
+void board_led_initialize(void)
 {
   /* Configure all LED GPIO lines */
 
@@ -98,10 +98,10 @@ void up_ledinit(void)
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
   bool off;
 
@@ -125,10 +125,10 @@ void up_ledon(int led)
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
   bool off;
 

configs/maple/src/up_boot.c

@@ -74,7 +74,7 @@ void stm32_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 
   /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function

configs/maple/src/up_leds.c

@@ -87,11 +87,11 @@ static inline void set_led(bool v)
  ****************************************************************************/
 
 /****************************************************************************
- * Name: up_ledinit
+ * Name: board_led_initialize
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_LEDS
-void up_ledinit(void)
+void board_led_initialize(void)
 {
   /* Configure LED GPIO for output */
 
@@ -99,12 +99,12 @@ void up_ledinit(void)
 }
 
 /****************************************************************************
- * Name: up_ledon
+ * Name: board_led_on
  ****************************************************************************/
 
-void up_ledon(int led)
+void board_led_on(int led)
 {
-  ledvdbg("up_ledon(%d)\n", led);
+  ledvdbg("board_led_on(%d)\n", led);
   switch (led)
     {
     case LED_STARTED:
@@ -128,12 +128,12 @@ void up_ledon(int led)
 }
 
 /****************************************************************************
- * Name: up_ledoff
+ * Name: board_led_off
  ****************************************************************************/
 
-void up_ledoff(int led)
+void board_led_off(int led)
 {
-  ledvdbg("up_ledoff(%d)\n", led);
+  ledvdbg("board_led_off(%d)\n", led);
 
   switch (led)
     {

configs/mbed/src/up_boot.c

@@ -76,7 +76,7 @@ void lpc17_boardinitialize(void)
   /* Configure on-board LEDs if LED support has been selected. */
 
 #ifdef CONFIG_ARCH_LEDS
-  up_ledinit();
+  board_led_initialize();
 #endif
 }