Mirrors_Framework/nuttx
1
0
Fork 0
mirror of https://github.com/apache/nuttx.git synced 2026-05-22 05:42:05 +08:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity

eZ80 Ethernet now supports CONFIG_NET_NOINTS

Browse Source
This commit is contained in:
Gregory Nutt
2016-12-03 10:43:35 -06:00
parent eba1e076ec
commit 41e35c88bf
12 changed files with 681 additions and 74 deletions
Download Patch File Download Diff File Expand all files Collapse all files
TODO
+2 -2
View File
@@ -1059,12 +1059,12 @@ o Network (net/, drivers/net)
TIVA ----------------------- ------
LM3S YES NO
TM4C YES YES
eZ80 NO NO
eZ80 YES NO
Kinetis YES YES (not tested)
LPC17xx YES YES (not tested)
LPC43xx YES YES (not tested)
DMxxx NIC NO NO
PIC32 NO NO
PIC32 YES NO
SAM3/4 YES YES
SAMA5D ----------------------- ------
EMACA YES YES (not tested)
arch/mips/src/pic32mz/pic32mz-ethernet.c
+2
View File
@@ -3174,6 +3174,7 @@ static inline int pic32mz_phyinit(struct pic32mz_driver_s *priv)
nerr("ERROR: No PHY detected\n");
return -ENODEV;
}
ninfo("phyaddr: %d\n", phyaddr);
/* Save the discovered PHY device address */
@@ -3187,6 +3188,7 @@ static inline int pic32mz_phyinit(struct pic32mz_driver_s *priv)
{
return ret;
}
pic32mz_showmii(phyaddr, "After reset");
/* Set the MII/RMII operation mode. This usually requires access to a
arch/z80/src/ez80/Kconfig
+20
View File
@@ -117,6 +117,26 @@ config ARCH_MCFILTER
---help---
Enables multicast MAC address filtering (not fully implemented)
choice
prompt "Work queue"
default EZ80_EMAC_LPWORK if SCHED_LPWORK
default EZ80_EMAC_HPWORK if !SCHED_LPWORK && SCHED_HPWORK
depends on SCHED_WORKQUEUE
---help---
Work queue support is required to use the Ethernet driver. If the
low priority work queue is available, then it should be used by the
driver.
config EZ80_EMAC_HPWORK
bool "High priority"
depends on SCHED_HPWORK
config EZ80_EMAC_LPWORK
bool "Low priority"
depends on SCHED_LPWORK
endchoice # Work queue
endif # EZ80_EMAC
config ARCH_TIMERHOOK
arch/z80/src/ez80/Make.defs
+1 -1
View File
@@ -44,7 +44,7 @@ CMN_CSRCS += up_reprioritizertr.c up_idle.c up_assert.c up_doirq.c
CMN_CSRCS += up_mdelay.c up_stackframe.c up_udelay.c up_usestack.c
CMN_CSRCS += up_puts.c
CHIP_ASRCS = ez80_startup.asm ez80_io.asm ez80_up_irq_save.asm
CHIP_ASRCS = ez80_startup.asm ez80_io.asm ez80_irqsave.asm
CHIP_ASRCS += ez80_saveusercontext.asm ez80_restorecontext.asm
ifeq ($(CONFIG_ARCH_CHIP_EZ80F91),y)
CHIP_ASRCS += ez80f91_init.asm
arch/z80/src/ez80/ez80_emac.c
+609 -49
View File
File diff suppressed because it is too large Load Diff
arch/z80/src/ez80/ez80_irqsave.asm
+1 -1
View File
@@ -1,5 +1,5 @@
;**************************************************************************
; arch/z80/src/ez80/ez80_up_irq_save.asm
; arch/z80/src/ez80/ez80_irqsave.asm
;
; Copyright (C) 2008 Gregory Nutt. All rights reserved.
; Author: Gregory Nutt <gnutt@nuttx.org>
configs/ez80f910200zco/dhcpd/defconfig
+9 -4
View File
@@ -148,6 +148,7 @@ CONFIG_EZ80_NRXPKTBUFS=64
CONFIG_EZ80_MDCDIV=0
CONFIG_EZ80_TXPOLLTIMERMS=10
# CONFIG_ARCH_MCFILTER is not set
CONFIG_EZ80_EMAC_HPWORK=y
CONFIG_ARCH_TIMERHOOK=y
#
@@ -289,6 +290,7 @@ CONFIG_NAME_MAX=32
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
# CONFIG_SIG_EVTHREAD is not set
#
# Signal Numbers
@@ -296,13 +298,17 @@ CONFIG_NAME_MAX=32
CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGWORK=17
# CONFIG_MODULE is not set
#
# Work queue support
#
# CONFIG_SCHED_WORKQUEUE is not set
# CONFIG_SCHED_HPWORK is not set
CONFIG_SCHED_WORKQUEUE=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_HPWORKPRIORITY=224
CONFIG_SCHED_HPWORKPERIOD=50000
CONFIG_SCHED_HPWORKSTACKSIZE=2048
# CONFIG_SCHED_LPWORK is not set
#
@@ -393,7 +399,6 @@ CONFIG_ARCH_HAVE_NETDEV_STATISTICS=y
# CONFIG_NET_DM90x0 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_NET_SLIP is not set
# CONFIG_NET_FTMAC100 is not set
@@ -495,7 +500,7 @@ CONFIG_SYSLOG_CONSOLE=y
CONFIG_ARCH_HAVE_NET=y
CONFIG_ARCH_HAVE_PHY=y
CONFIG_NET=y
# CONFIG_NET_NOINTS is not set
CONFIG_NET_NOINTS=y
# CONFIG_NET_PROMISCUOUS is not set
#
configs/ez80f910200zco/httpd/defconfig
+9 -4
View File
@@ -148,6 +148,7 @@ CONFIG_EZ80_NRXPKTBUFS=64
CONFIG_EZ80_MDCDIV=0
CONFIG_EZ80_TXPOLLTIMERMS=10
# CONFIG_ARCH_MCFILTER is not set
CONFIG_EZ80_EMAC_HPWORK=y
CONFIG_ARCH_TIMERHOOK=y
#
@@ -295,6 +296,7 @@ CONFIG_NAME_MAX=32
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
# CONFIG_SIG_EVTHREAD is not set
#
# Signal Numbers
@@ -303,13 +305,17 @@ CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
CONFIG_SIG_SIGWORK=17
# CONFIG_MODULE is not set
#
# Work queue support
#
# CONFIG_SCHED_WORKQUEUE is not set
# CONFIG_SCHED_HPWORK is not set
CONFIG_SCHED_WORKQUEUE=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_HPWORKPRIORITY=224
CONFIG_SCHED_HPWORKPERIOD=50000
CONFIG_SCHED_HPWORKSTACKSIZE=2048
# CONFIG_SCHED_LPWORK is not set
#
@@ -402,7 +408,6 @@ CONFIG_ARCH_HAVE_NETDEV_STATISTICS=y
# CONFIG_NET_DM90x0 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_NET_SLIP is not set
# CONFIG_NET_FTMAC100 is not set
@@ -504,7 +509,7 @@ CONFIG_SYSLOG_CONSOLE=y
CONFIG_ARCH_HAVE_NET=y
CONFIG_ARCH_HAVE_PHY=y
CONFIG_NET=y
# CONFIG_NET_NOINTS is not set
CONFIG_NET_NOINTS=y
# CONFIG_NET_PROMISCUOUS is not set
#
configs/ez80f910200zco/nettest/defconfig
+9 -4
View File
@@ -148,6 +148,7 @@ CONFIG_EZ80_NRXPKTBUFS=64
CONFIG_EZ80_MDCDIV=0
CONFIG_EZ80_TXPOLLTIMERMS=10
# CONFIG_ARCH_MCFILTER is not set
CONFIG_EZ80_EMAC_HPWORK=y
CONFIG_ARCH_TIMERHOOK=y
#
@@ -289,6 +290,7 @@ CONFIG_NAME_MAX=32
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
# CONFIG_SIG_EVTHREAD is not set
#
# Signal Numbers
@@ -296,13 +298,17 @@ CONFIG_NAME_MAX=32
CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGWORK=17
# CONFIG_MODULE is not set
#
# Work queue support
#
# CONFIG_SCHED_WORKQUEUE is not set
# CONFIG_SCHED_HPWORK is not set
CONFIG_SCHED_WORKQUEUE=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_HPWORKPRIORITY=224
CONFIG_SCHED_HPWORKPERIOD=50000
CONFIG_SCHED_HPWORKSTACKSIZE=2048
# CONFIG_SCHED_LPWORK is not set
#
@@ -394,7 +400,6 @@ CONFIG_ARCH_HAVE_NETDEV_STATISTICS=y
# CONFIG_NET_DM90x0 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_NET_SLIP is not set
# CONFIG_NET_FTMAC100 is not set
@@ -496,7 +501,7 @@ CONFIG_SYSLOG_CONSOLE=y
CONFIG_ARCH_HAVE_NET=y
CONFIG_ARCH_HAVE_PHY=y
CONFIG_NET=y
# CONFIG_NET_NOINTS is not set
CONFIG_NET_NOINTS=y
# CONFIG_NET_PROMISCUOUS is not set
#
configs/ez80f910200zco/nsh/defconfig
+9 -4
View File
@@ -148,6 +148,7 @@ CONFIG_EZ80_NRXPKTBUFS=64
CONFIG_EZ80_MDCDIV=0
CONFIG_EZ80_TXPOLLTIMERMS=10
# CONFIG_ARCH_MCFILTER is not set
CONFIG_EZ80_EMAC_HPWORK=y
CONFIG_ARCH_TIMERHOOK=y
#
@@ -295,6 +296,7 @@ CONFIG_NAME_MAX=32
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
# CONFIG_SIG_EVTHREAD is not set
#
# Signal Numbers
@@ -303,13 +305,17 @@ CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
CONFIG_SIG_SIGWORK=17
# CONFIG_MODULE is not set
#
# Work queue support
#
# CONFIG_SCHED_WORKQUEUE is not set
# CONFIG_SCHED_HPWORK is not set
CONFIG_SCHED_WORKQUEUE=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_HPWORKPRIORITY=224
CONFIG_SCHED_HPWORKPERIOD=50000
CONFIG_SCHED_HPWORKSTACKSIZE=2048
# CONFIG_SCHED_LPWORK is not set
#
@@ -404,7 +410,6 @@ CONFIG_ARCH_HAVE_NETDEV_STATISTICS=y
# CONFIG_NET_DM90x0 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_NET_SLIP is not set
# CONFIG_NET_FTMAC100 is not set
@@ -507,7 +512,7 @@ CONFIG_SYSLOG_CONSOLE=y
CONFIG_ARCH_HAVE_NET=y
CONFIG_ARCH_HAVE_PHY=y
CONFIG_NET=y
# CONFIG_NET_NOINTS is not set
CONFIG_NET_NOINTS=y
# CONFIG_NET_PROMISCUOUS is not set
#
configs/ez80f910200zco/poll/defconfig
+9 -4
View File
@@ -148,6 +148,7 @@ CONFIG_EZ80_NRXPKTBUFS=64
CONFIG_EZ80_MDCDIV=0
CONFIG_EZ80_TXPOLLTIMERMS=10
# CONFIG_ARCH_MCFILTER is not set
CONFIG_EZ80_EMAC_HPWORK=y
CONFIG_ARCH_TIMERHOOK=y
#
@@ -295,6 +296,7 @@ CONFIG_NAME_MAX=32
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
# CONFIG_SIG_EVTHREAD is not set
#
# Signal Numbers
@@ -303,13 +305,17 @@ CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
CONFIG_SIG_SIGWORK=17
# CONFIG_MODULE is not set
#
# Work queue support
#
# CONFIG_SCHED_WORKQUEUE is not set
# CONFIG_SCHED_HPWORK is not set
CONFIG_SCHED_WORKQUEUE=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_HPWORKPRIORITY=224
CONFIG_SCHED_HPWORKPERIOD=50000
CONFIG_SCHED_HPWORKSTACKSIZE=2048
# CONFIG_SCHED_LPWORK is not set
#
@@ -401,7 +407,6 @@ CONFIG_ARCH_HAVE_NETDEV_STATISTICS=y
# CONFIG_NET_DM90x0 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_NET_SLIP is not set
# CONFIG_NET_FTMAC100 is not set
@@ -506,7 +511,7 @@ CONFIG_SYSLOG_CONSOLE=y
CONFIG_ARCH_HAVE_NET=y
CONFIG_ARCH_HAVE_PHY=y
CONFIG_NET=y
# CONFIG_NET_NOINTS is not set
CONFIG_NET_NOINTS=y
# CONFIG_NET_PROMISCUOUS is not set
#
include/debug.h
+1 -1
View File
@@ -810,7 +810,7 @@
#ifdef CONFIG_DEBUG_CRYPTO_INFO
# define cryptinfo _info
#else
# define cryptinfo(x...)
# define cryptinfo (void)
#endif
#ifdef CONFIG_DEBUG_INPUT_ERROR