mirror of
https://github.com/apache/nuttx.git
synced 2026-05-22 05:42:05 +08:00
Freedom KL25Z pin mux'ing fixes from Alan Carvalho de Assis
This commit is contained in:
Gregory Nutt
@@ -4655,4 +4655,7 @@
|
||||
* fs/smartfs: Add Ken Pettits SMART FS (2013-4-30).
|
||||
* include/nuttx/mtd.h and most MTD drivers: Add support for
|
||||
(optional) method to perform byte oriented writes if so configured
|
||||
(2013-5-1)
|
||||
(2013-5-1).
|
||||
* arch/arm/src/kl/chip/kl25z128_pinmux.h: Corrections fo the
|
||||
pin multiplexing definitions from Alan Carvalho de Assis
|
||||
(2013-5-2).
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,339 @@
|
||||
/********************************************************************************************
|
||||
* arch/arm/src/kl/k25z128_pinmux.h
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
********************************************************************************************/
|
||||
|
||||
#ifndef __ARCH_ARM_SRC_KINETIS_KINETIS_KL25PINMUX_H
|
||||
#define __ARCH_ARM_SRC_KINETIS_KINETIS_KL25PINMUX_H
|
||||
|
||||
/********************************************************************************************
|
||||
* Included Files
|
||||
********************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include "chip.h"
|
||||
|
||||
/********************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
********************************************************************************************/
|
||||
/* Reference: Paragraph 10.3.1, p 227, of FreeScale document K40P144M100SF2RM
|
||||
*
|
||||
* In most cases, there are alternative configurations for various pins. Those alternative
|
||||
* pins are labeled with a suffix like _1, _2, etc. in order to distinguish them. Logic in
|
||||
* the board.h file must select the correct pin configuration for the board by defining a pin
|
||||
* configuration (with no suffix) that maps to the correct alternative.
|
||||
*/
|
||||
|
||||
#define PIN_TSI0_CH1 (PIN_ANALOG | PIN_PORTA | PIN0)
|
||||
#define PIN_TPM0_CH5_1 (PIN_ALT3 | PIN_PORTA | PIN0)
|
||||
#define PIN_SWD_CLK (PIN_ALT7 | PIN_PORTA | PIN0)
|
||||
|
||||
#define PIN_TSI0_CH2 (PIN_ANALOG | PIN_PORTA | PIN1)
|
||||
#define PIN_UART0_RX_1 (PIN_ALT2 | PIN_PORTA | PIN1)
|
||||
#define PIN_TPM2_CH0_1 (PIN_ALT3 | PIN_PORTA | PIN1)
|
||||
|
||||
#define PIN_TSI0_CH3 (PIN_ANALOG | PIN_PORTA | PIN2)
|
||||
#define PIN_UART0_TX_1 (PIN_ALT2 | PIN_PORTA | PIN2)
|
||||
#define PIN_TPM2_CH1_1 (PIN_ALT3 | PIN_PORTA | PIN2)
|
||||
|
||||
#define PIN_TSI0_CH4 (PIN_ANALOG | PIN_PORTA | PIN3)
|
||||
#define PIN_I2C1_SCL_1 (PIN_ALT2 | PIN_PORTA | PIN3)
|
||||
#define PIN_TPM0_CH0_1 (PIN_ALT3 | PIN_PORTA | PIN3)
|
||||
#define PIN_SWD_DIO (PIN_ALT7 | PIN_PORTA | PIN3)
|
||||
|
||||
#define PIN_TSI0_CH5 (PIN_ANALOG | PIN_PORTA | PIN4)
|
||||
#define PIN_I2C1_SDA_1 (PIN_ALT2 | PIN_PORTA | PIN4)
|
||||
#define PIN_TPM0_CH1_1 (PIN_ALT3 | PIN_PORTA | PIN4)
|
||||
#define PIN_NMI (PIN_ALT7 | PIN_PORTA | PIN4)
|
||||
|
||||
#define PIN_USB_CLKIN (PIN_ALT2 | PIN_PORTA | PIN5)
|
||||
#define PIN_TPM0_CH2_1 (PIN_ALT3 | PIN_PORTA | PIN5)
|
||||
|
||||
/* pins PTA6 up to PTA11 are not define at
|
||||
* 10.3.1 KL25 Signal Multiplexing and Pin Assignments
|
||||
*/
|
||||
|
||||
#define PIN_TPM1_CH0_1 (PIN_ALT3 | PIN_PORTA | PIN12)
|
||||
|
||||
#define PIN_TPM1_CH1_1 (PIN_ALT3 | PIN_PORTA | PIN12)
|
||||
|
||||
#define PIN_SPI0_PCS0_1 (PIN_ALT2 | PIN_PORTA | PIN14)
|
||||
#define PIN_UART0_TX_2 (PIN_ALT3 | PIN_PORTA | PIN14)
|
||||
|
||||
#define PIN_SPI0_SCK_1 (PIN_ALT2 | PIN_PORTA | PIN15)
|
||||
#define PIN_UART0_RX_2 (PIN_ALT3 | PIN_PORTA | PIN15)
|
||||
|
||||
#define PIN_SPI0_MOSI_1 (PIN_ALT2 | PIN_PORTA | PIN16)
|
||||
#define PIN_SPI0_MISO_1 (PIN_ALT5 | PIN_PORTA | PIN16)
|
||||
|
||||
#define PIN_SPI0_MISO_2 (PIN_ALT2 | PIN_PORTA | PIN17)
|
||||
#define PIN_SPI0_MOSI_2 (PIN_ALT5 | PIN_PORTA | PIN17)
|
||||
|
||||
#define PIN_EXTAL0 (PIN_ANALOG | PIN_PORTA | PIN18)
|
||||
#define PIN_UART1_RX_1 (PIN_ALT3 | PIN_PORTA | PIN18)
|
||||
#define PIN_TPM_CLKIN0_1 (PIN_ALT4 | PIN_PORTA | PIN18)
|
||||
|
||||
#define PIN_XTAL0 (PIN_ANALOG | PIN_PORTA | PIN19)
|
||||
#define PIN_UART1_TX_1 (PIN_ALT3 | PIN_PORTA | PIN19)
|
||||
#define PIN_TPM_CLKIN1_1 (PIN_ALT4 | PIN_PORTA | PIN19)
|
||||
#define PIN_LPTMR0_ALT1 (PIN_ALT6 | PIN_PORTA | PIN19)
|
||||
|
||||
/* pin PTA20 is RESET and pins PTA21 up to PTA31 are not define at
|
||||
* 10.3.1 KL25 Signal Multiplexing and Pin Assignments
|
||||
*/
|
||||
|
||||
#define PIN_TSI0_CH0 (PIN_ANALOG | PIN_PORTB | PIN0)
|
||||
#define PIN_ADC0_SE8 (PIN_ANALOG | PIN_PORTB | PIN0)
|
||||
#define PIN_LLWU_P5 (PIN_ALT1 | PIN_PORTB | PIN0)
|
||||
#define PIN_I2C0_SCL_1 (PIN_ALT2 | PIN_PORTB | PIN0)
|
||||
#define PIN_TPM1_CH0_2 (PIN_ALT3 | PIN_PORTB | PIN0)
|
||||
|
||||
#define PIN_ADC0_SE9 (PIN_ANALOG | PIN_PORTB | PIN1)
|
||||
#define PIN_TSI0_CH6 (PIN_ANALOG | PIN_PORTB | PIN1)
|
||||
#define PIN_I2C0_SDA_1 (PIN_ALT2 | PIN_PORTB | PIN1)
|
||||
#define PIN_TPM1_CH1_2 (PIN_ALT3 | PIN_PORTB | PIN1)
|
||||
|
||||
#define PIN_ADC0_SE12 (PIN_ANALOG | PIN_PORTB | PIN2)
|
||||
#define PIN_TSI0_CH7 (PIN_ANALOG | PIN_PORTB | PIN2)
|
||||
#define PIN_I2C0_SCL_2 (PIN_ALT2 | PIN_PORTB | PIN2)
|
||||
#define PIN_TPM2_CH0_2 (PIN_ALT3 | PIN_PORTB | PIN2)
|
||||
|
||||
#define PIN_ADC0_SE13 (PIN_ANALOG | PIN_PORTB | PIN3)
|
||||
#define PIN_TSI0_CH8 (PIN_ANALOG | PIN_PORTB | PIN3)
|
||||
#define PIN_I2C0_SDA_2 (PIN_ALT2 | PIN_PORTB | PIN3)
|
||||
#define PIN_TPM2_CH1_2 (PIN_ALT3 | PIN_PORTB | PIN3)
|
||||
|
||||
/* pins PTB4 up to PTB7 are not define at
|
||||
* 10.3.1 KL25 Signal Multiplexing and Pin Assignments
|
||||
*/
|
||||
|
||||
#define PIN_EXTRG_IN_1 (PIN_ALT3 | PIN_PORTB | PIN8)
|
||||
|
||||
#define PIN_SPI1_PCS0_1 (PIN_ALT2 | PIN_PORTB | PIN10)
|
||||
|
||||
#define PIN_SPI1_SCK_1 (PIN_ALT2 | PIN_PORTB | PIN11)
|
||||
|
||||
#define PIN_TSI0_CH9 (PIN_ANALOG | PIN_PORTB | PIN16)
|
||||
#define PIN_SPI1_MOSI_1 (PIN_ALT2 | PIN_PORTB | PIN16)
|
||||
#define PIN_UART0_RX_3 (PIN_ALT3 | PIN_PORTB | PIN16)
|
||||
#define PIN_TPM_CLKIN0_2 (PIN_ALT4 | PIN_PORTB | PIN16)
|
||||
#define PIN_SPI1_MISO_1 (PIN_ALT5 | PIN_PORTB | PIN16)
|
||||
|
||||
#define PIN_TSI0_CH10 (PIN_ANALOG | PIN_PORTB | PIN17)
|
||||
#define PIN_SPI1_MISO_2 (PIN_ALT2 | PIN_PORTB | PIN17)
|
||||
#define PIN_UART0_TX_3 (PIN_ALT3 | PIN_PORTB | PIN17)
|
||||
#define PIN_TPM_CLKIN1_2 (PIN_ALT4 | PIN_PORTB | PIN17)
|
||||
#define PIN_SPI1_MOSI_2 (PIN_ALT7 | PIN_PORTB | PIN17)
|
||||
|
||||
#define PIN_TSI0_CH11 (PIN_ANALOG | PIN_PORTB | PIN18)
|
||||
#define PIN_TPM2_CH0_3 (PIN_ALT3 | PIN_PORTB | PIN18)
|
||||
|
||||
#define PIN_TSI0_CH12 (PIN_ANALOG | PIN_PORTB | PIN19)
|
||||
#define PIN_TPM2_CH1_3 (PIN_ALT3 | PIN_PORTB | PIN19)
|
||||
|
||||
/* pins PTB20 up to PTB31 are not define at
|
||||
* 10.3.1 KL25 Signal Multiplexing and Pin Assignments
|
||||
*/
|
||||
|
||||
#define PIN_ADC0_SE14 (PIN_ANALOG | PIN_PORTC | PIN0)
|
||||
#define PIN_TSI0_CH13 (PIN_ANALOG | PIN_PORTC | PIN0)
|
||||
#define PIN_EXTRG_IN_2 (PIN_ALT3 | PIN_PORTC | PIN0)
|
||||
#define PIN_CPM0_OUT (PIN_ALT5 | PIN_PORTC | PIN0)
|
||||
|
||||
#define PIN_ADC0_SE15 (PIN_ANALOG | PIN_PORTC | PIN1)
|
||||
#define PIN_TSI0_CH14 (PIN_ANALOG | PIN_PORTC | PIN1)
|
||||
#define PIN_LLWU_P6 (PIN_ALT1 | PIN_PORTC | PIN1)
|
||||
#define PIN_RTC_CLKIN (PIN_ALT1 | PIN_PORTC | PIN1)
|
||||
#define PIN_I2C1_SCL_2 (PIN_ALT2 | PIN_PORTC | PIN1)
|
||||
#define PIN_TPM0_CH0_2 (PIN_ALT4 | PIN_PORTC | PIN1)
|
||||
|
||||
#define PIN_ADC0_SE11 (PIN_ANALOG | PIN_PORTC | PIN2)
|
||||
#define PIN_TSI0_CH15 (PIN_ANALOG | PIN_PORTC | PIN2)
|
||||
#define PIN_I2C1_SDA_2 (PIN_ALT2 | PIN_PORTC | PIN2)
|
||||
#define PIN_TPM0_CH1_2 (PIN_ALT4 | PIN_PORTC | PIN2)
|
||||
|
||||
#define PIN_LLWU_P7 (PIN_ALT1 | PIN_PORTC | PIN3)
|
||||
#define PIN_UART1_RX_2 (PIN_ALT3 | PIN_PORTC | PIN3)
|
||||
#define PIN_TPM0_CH2_2 (PIN_ALT4 | PIN_PORTC | PIN3)
|
||||
#define PIN_CLKOUT (PIN_ALT5 | PIN_PORTC | PIN3)
|
||||
|
||||
#define PIN_LLWU_P8 (PIN_ALT1 | PIN_PORTC | PIN4)
|
||||
#define PIN_SPI0_PCS0_2 (PIN_ALT2 | PIN_PORTC | PIN4)
|
||||
#define PIN_UART1_TX_2 (PIN_ALT3 | PIN_PORTC | PIN4)
|
||||
#define PIN_TPM0_CH3_1 (PIN_ALT4 | PIN_PORTC | PIN4)
|
||||
|
||||
#define PIN_LLWU_P9 (PIN_ALT1 | PIN_PORTC | PIN5)
|
||||
#define PIN_SPI0_SCK_2 (PIN_ALT2 | PIN_PORTC | PIN5)
|
||||
#define PIN_LPTMR0_ALT2 (PIN_ALT4 | PIN_PORTC | PIN5)
|
||||
#define PIN_CMP0_OUT_1 (PIN_ALT6 | PIN_PORTC | PIN5)
|
||||
|
||||
#define PIN_CMP0_IN0 (PIN_ANALOG | PIN_PORTC | PIN6)
|
||||
#define PIN_LLWU_P10 (PIN_ALT1 | PIN_PORTC | PIN6)
|
||||
#define PIN_SPI0_MOSI_3 (PIN_ALT2 | PIN_PORTC | PIN6)
|
||||
#define PIN_EXTRG_IN_3 (PIN_ALT3 | PIN_PORTC | PIN6)
|
||||
#define PIN_SPI0_MISO_3 (PIN_ALT5 | PIN_PORTC | PIN6)
|
||||
|
||||
#define PIN_CMP0_IN1 (PIN_ANALOG | PIN_PORTC | PIN7)
|
||||
#define PIN_SPI0_MISO_4 (PIN_ALT2 | PIN_PORTC | PIN7)
|
||||
#define PIN_SPI0_MOSI_4 (PIN_ALT5 | PIN_PORTC | PIN7)
|
||||
|
||||
#define PIN_CMP0_IN2 (PIN_ANALOG | PIN_PORTC | PIN8)
|
||||
#define PIN_I2C0_SCL_3 (PIN_ALT2 | PIN_PORTC | PIN8)
|
||||
#define PIN_TPM0_CH4_1 (PIN_ALT3 | PIN_PORTC | PIN8)
|
||||
|
||||
#define PIN_CMP0_IN3 (PIN_ANALOG | PIN_PORTC | PIN9)
|
||||
#define PIN_I2C0_SDA_3 (PIN_ALT2 | PIN_PORTC | PIN9)
|
||||
#define PIN_TPM0_CH5_2 (PIN_ALT3 | PIN_PORTC | PIN9)
|
||||
|
||||
#define PIN_I2C1_SCL_3 (PIN_ALT2 | PIN_PORTC | PIN10)
|
||||
|
||||
#define PIN_I2C1_SDA_3 (PIN_ALT2 | PIN_PORTC | PIN11)
|
||||
|
||||
#define PIN_TPM_CLKIN0_3 (PIN_ALT4 | PIN_PORTC | PIN12)
|
||||
|
||||
#define PIN_TPM_CLKIN1_3 (PIN_ALT4 | PIN_PORTC | PIN13)
|
||||
|
||||
/* pins PTC18 up to PTC31 are not define at
|
||||
* 10.3.1 KL25 Signal Multiplexing and Pin Assignments
|
||||
*/
|
||||
|
||||
#define PIN_SPI0_PCS0_3 (PIN_ALT2 | PIN_PORTD | PIN0)
|
||||
#define PIN_TPM0_CH0_3 (PIN_ALT4 | PIN_PORTD | PIN0)
|
||||
|
||||
#define PIN_ADC0_SE5B (PIN_ANALOG | PIN_PORTD | PIN1)
|
||||
#define PIN_SPI0_SCK_3 (PIN_ALT2 | PIN_PORTD | PIN1)
|
||||
#define PIN_TPM0_CH1_3 (PIN_ALT4 | PIN_PORTD | PIN1)
|
||||
|
||||
#define PIN_SPI0_MOSI_5 (PIN_ALT2 | PIN_PORTD | PIN2)
|
||||
#define PIN_UART2_RX_1 (PIN_ALT3 | PIN_PORTD | PIN2)
|
||||
#define PIN_TPM0_CH2_3 (PIN_ALT4 | PIN_PORTD | PIN2)
|
||||
#define PIN_SPI0_MISO_5 (PIN_ALT5 | PIN_PORTD | PIN2)
|
||||
|
||||
#define PIN_SPI0_MISO_6 (PIN_ALT2 | PIN_PORTD | PIN3)
|
||||
#define PIN_UART2_TX_1 (PIN_ALT3 | PIN_PORTD | PIN3)
|
||||
#define PIN_TPM0_CH3_2 (PIN_ALT4 | PIN_PORTD | PIN3)
|
||||
#define PIN_SPI0_MOSI_6 (PIN_ALT5 | PIN_PORTD | PIN3)
|
||||
|
||||
#define PIN_LLWU_P14 (PIN_ALT1 | PIN_PORTD | PIN4)
|
||||
#define PIN_SPI0_PCS0_4 (PIN_ALT2 | PIN_PORTD | PIN4)
|
||||
#define PIN_UART2_RX_2 (PIN_ALT3 | PIN_PORTD | PIN4)
|
||||
#define PIN_TPM0_CH4_2 (PIN_ALT4 | PIN_PORTD | PIN4)
|
||||
|
||||
#define PIN_ADC0_SE6B (PIN_ANALOG | PIN_PORTD | PIN5)
|
||||
#define PIN_SPI1_SCK_2 (PIN_ALT2 | PIN_PORTD | PIN5)
|
||||
#define PIN_UART2_TX_2 (PIN_ALT3 | PIN_PORTD | PIN5)
|
||||
#define PIN_TPM0_CH5_3 (PIN_ALT4 | PIN_PORTD | PIN5)
|
||||
|
||||
#define PIN_ADC0_SE7B (PIN_ANALOG | PIN_PORTD | PIN6)
|
||||
#define PIN_LLWU_P15 (PIN_ALT1 | PIN_PORTD | PIN6)
|
||||
#define PIN_SPI0_MOSI_7 (PIN_ALT2 | PIN_PORTD | PIN6)
|
||||
#define PIN_UART0_RX_4 (PIN_ALT3 | PIN_PORTD | PIN6)
|
||||
#define PIN_SPI0_MISO_7 (PIN_ALT5 | PIN_PORTD | PIN6)
|
||||
|
||||
#define PIN_SPI1_MISO_3 (PIN_ALT2 | PIN_PORTD | PIN7)
|
||||
#define PIN_UART0_TX_4 (PIN_ALT3 | PIN_PORTD | PIN7)
|
||||
#define PIN_SPI1_MOSI_3 (PIN_ALT5 | PIN_PORTD | PIN7)
|
||||
|
||||
/* pins PTD8 up to PTD31 are not define at
|
||||
* 10.3.1 KL25 Signal Multiplexing and Pin Assignments
|
||||
*/
|
||||
|
||||
#define PIN_UART1_TX_3 (PIN_ALT3 | PIN_PORTE | PIN0)
|
||||
#define PIN_RTC_CLKOUT (PIN_ALT4 | PIN_PORTE | PIN0)
|
||||
#define PIN_CMP0_OUT_2 (PIN_ALT5 | PIN_PORTE | PIN0)
|
||||
#define PIN_I2C1_SDA_4 (PIN_ALT6 | PIN_PORTE | PIN0)
|
||||
|
||||
#define PIN_SPI1_MOSI_4 (PIN_ALT2 | PIN_PORTE | PIN1)
|
||||
#define PIN_UART1_RX_3 (PIN_ALT3 | PIN_PORTE | PIN1)
|
||||
#define PIN_SPI1_MISO_4 (PIN_ALT5 | PIN_PORTE | PIN1)
|
||||
#define PIN_I2C1_SCL_4 (PIN_ALT6 | PIN_PORTE | PIN1)
|
||||
|
||||
#define PIN_SPI1_SCK_3 (PIN_ALT2 | PIN_PORTE | PIN2)
|
||||
|
||||
#define PIN_SPI1_MISO_5 (PIN_ALT2 | PIN_PORTE | PIN3)
|
||||
|
||||
#define PIN_SPI1_PCS0_2 (PIN_ALT2 | PIN_PORTE | PIN4)
|
||||
|
||||
#define PIN_ADC0_DP0 (PIN_ANALOG | PIN_PORTE | PIN20)
|
||||
#define PIN_ADC0_SE0 (PIN_ANALOG | PIN_PORTE | PIN20)
|
||||
#define PIN_TPM1_CH0_3 (PIN_ALT3 | PIN_PORTE | PIN20)
|
||||
#define PIN_UART0_TX_5 (PIN_ALT4 | PIN_PORTE | PIN20)
|
||||
|
||||
#define PIN_ADC0_DM0 (PIN_ANALOG | PIN_PORTE | PIN21)
|
||||
#define PIN_ADC0_SE4A (PIN_ANALOG | PIN_PORTE | PIN21)
|
||||
#define PIN_TPM1_CH1_3 (PIN_ALT3 | PIN_PORTE | PIN21)
|
||||
#define PIN_UART0_RX_5 (PIN_ALT4 | PIN_PORTE | PIN21)
|
||||
|
||||
#define PIN_ADC0_DP3 (PIN_ANALOG | PIN_PORTE | PIN22)
|
||||
#define PIN_ADC0_SE3 (PIN_ANALOG | PIN_PORTE | PIN22)
|
||||
#define PIN_TPM2_CH0_4 (PIN_ALT3 | PIN_PORTE | PIN22)
|
||||
#define PIN_UART2_TX_3 (PIN_ALT4 | PIN_PORTE | PIN22)
|
||||
|
||||
#define PIN_ADC0_DM3 (PIN_ANALOG | PIN_PORTE | PIN23)
|
||||
#define PIN_ADC0_SE7A (PIN_ANALOG | PIN_PORTE | PIN23)
|
||||
#define PIN_TPM2_CH1_4 (PIN_ALT3 | PIN_PORTE | PIN23)
|
||||
#define PIN_UART2_RX_3 (PIN_ALT4 | PIN_PORTE | PIN23)
|
||||
|
||||
#define PIN_TPM0_CH0_4 (PIN_ALT3 | PIN_PORTE | PIN24)
|
||||
#define PIN_I2C0_SCL_4 (PIN_ALT5 | PIN_PORTE | PIN24)
|
||||
|
||||
#define PIN_TPM0_CH1_4 (PIN_ALT3 | PIN_PORTE | PIN25)
|
||||
#define PIN_I2C0_SDA_4 (PIN_ALT5 | PIN_PORTE | PIN25)
|
||||
|
||||
#define PIN_CMP0_IN5 (PIN_ANALOG | PIN_PORTE | PIN29)
|
||||
#define PIN_ADC0_SE4A (PIN_ANALOG | PIN_PORTE | PIN29)
|
||||
#define PIN_TPM0_CH2_4 (PIN_ALT3 | PIN_PORTE | PIN29)
|
||||
#define PIN_TPM_CLKIN0_4 (PIN_ALT4 | PIN_PORTE | PIN29)
|
||||
|
||||
#define PIN_DAC0_OUT (PIN_ANALOG | PIN_PORTE | PIN30)
|
||||
#define PIN_ADC0_SE23 (PIN_ANALOG | PIN_PORTE | PIN30)
|
||||
#define PIN_CMP0_IN4 (PIN_ANALOG | PIN_PORTE | PIN30)
|
||||
#define PIN_TPM0_CH3_3 (PIN_ALT3 | PIN_PORTE | PIN30)
|
||||
#define PIN_TPM_CLKIN1_4 (PIN_ALT4 | PIN_PORTE | PIN30)
|
||||
|
||||
#define PIN_TPM0_CH4_3 (PIN_ALT3 | PIN_PORTE | PIN31)
|
||||
|
||||
/********************************************************************************************
|
||||
* Public Types
|
||||
********************************************************************************************/
|
||||
|
||||
/********************************************************************************************
|
||||
* Public Data
|
||||
********************************************************************************************/
|
||||
|
||||
/********************************************************************************************
|
||||
* Public Functions
|
||||
********************************************************************************************/
|
||||
|
||||
#endif /* __ARCH_ARM_SRC_KINETIS_KINETIS_K40PINMUX_H */
|
||||
@@ -48,7 +48,7 @@
|
||||
* by the logic in chip.h.
|
||||
*/
|
||||
|
||||
#include "k25z120_pinmux.h"
|
||||
#include "k25z128_pinmux.h"
|
||||
|
||||
/********************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
|
||||
Reference in New Issue
Block a user