mirror of
https://github.com/apache/nuttx.git
synced 2026-05-22 05:42:05 +08:00
Merged in raiden00/nuttx (pull request #214)
Add driver for the ST L3GD20 3 axis gyro Approved-by: Gregory Nutt
This commit is contained in:
Mateusz Szafoni
Gregory Nutt
@@ -8,7 +8,7 @@ memory and 256kbytes. The board features:
|
||||
|
||||
- On-board ST-LINK/V2 for programming and debugging,
|
||||
- On-board 64 Mbits (8 Mbytes) External SDRAM (1 Mbit x 16-bit x 4-bank)
|
||||
- LIS302DL, ST MEMS motion sensor, 3-axis digital output accelerometer,
|
||||
- L3GD20, ST MEMS motion sensor, 3-axis digital output gyroscope,
|
||||
- TFT 2.4" LCD, 262K color RGB, 240 x 320 pixels
|
||||
- Touchscreen controller
|
||||
- Two user LEDs and two push-buttons,
|
||||
|
||||
@@ -72,6 +72,10 @@ ifeq ($(CONFIG_STM32F429I_DISCO_ILI9341),y)
|
||||
CSRCS += stm32_ili93414ws.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_SENSORS_L3GD20),y)
|
||||
CSRCS += stm32_l3gd20.c
|
||||
endif
|
||||
|
||||
ifeq ($(and \
|
||||
$(CONFIG_STM32F429I_DISCO_ILI9341_LCDIFACE), \
|
||||
$(CONFIG_STM32F429I_DISCO_ILI9341_FBIFACE), \
|
||||
|
||||
@@ -165,6 +165,8 @@ int board_app_initialize(uintptr_t arg)
|
||||
int ret;
|
||||
#elif defined(HAVE_USBHOST) || defined(HAVE_USBMONITOR)
|
||||
int ret;
|
||||
#elif defined(CONFIG_SENSORS_L3GD20)
|
||||
int ret;
|
||||
#endif
|
||||
|
||||
/* Configure SPI-based devices */
|
||||
@@ -378,5 +380,14 @@ int board_app_initialize(uintptr_t arg)
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SENSORS_L3GD20
|
||||
ret = stm32_l3gd20initialize("/dev/gyr0");
|
||||
if (ret != OK)
|
||||
{
|
||||
syslog(LOG_ERR, "ERROR: Failed to initialize l3gd20 sensor: %d\n", ret);
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
return OK;
|
||||
}
|
||||
|
||||
@@ -0,0 +1,144 @@
|
||||
/****************************************************************************
|
||||
* configs/stm32f429i-disco/src/stm32_l3gd20.c
|
||||
*
|
||||
* Authors: Mateusz Szafoni <raiden00@railab.me>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <errno.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/spi/spi.h>
|
||||
#include <nuttx/sensors/l3gd20.h>
|
||||
|
||||
#include "stm32.h"
|
||||
#include "stm32_spi.h"
|
||||
#include "stm32f429i-disco.h"
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
#if defined(CONFIG_SPI) & defined(CONFIG_SENSORS_L3GD20)
|
||||
|
||||
/****************************************************************************
|
||||
* Private Function Prototypes
|
||||
****************************************************************************/
|
||||
|
||||
static int l3gd20_attach(FAR struct l3gd20_config_s * cfg, xcpt_t irq);
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
/* Only one L3GD20 device on board */
|
||||
|
||||
static struct l3gd20_config_s g_l3gd20_config =
|
||||
{
|
||||
.attach = l3gd20_attach,
|
||||
.irq = L3GD20_IRQ,
|
||||
.spi_devid = SPIDEV_ACCELEROMETER
|
||||
};
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: l3gd20_attach()
|
||||
*
|
||||
* Description: Attach the l3gd20 interrupt handler to the GPIO interrupt
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static int l3gd20_attach(FAR struct l3gd20_config_s * cfg, xcpt_t irq)
|
||||
{
|
||||
stm32_gpiosetevent(GPIO_L3GD20_DREADY, true, false, true, irq);
|
||||
|
||||
return OK;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32_l3gd20initialize()
|
||||
*
|
||||
* Description:
|
||||
* Initialize and register the L3GD20 3 axis gyroscope sensor driver.
|
||||
*
|
||||
* Input parameters:
|
||||
* devpath - The full path to the driver to register. E.g., "/dev/gyro0"
|
||||
*
|
||||
* Returned Value:
|
||||
* Zero (OK) on success; a negated errno value on failure.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
int stm32_l3gd20initialize(FAR const char *devpath)
|
||||
{
|
||||
int ret = 0;
|
||||
struct spi_dev_s *spi;
|
||||
|
||||
/* Configure DREADY IRQ input */
|
||||
|
||||
stm32_configgpio(GPIO_L3GD20_DREADY);
|
||||
|
||||
/* Initialize SPI */
|
||||
|
||||
spi = stm32_spi5initialize();
|
||||
|
||||
if (!spi)
|
||||
{
|
||||
ret = -ENODEV;
|
||||
goto errout;
|
||||
}
|
||||
|
||||
/* Then register the gyro */
|
||||
|
||||
ret = l3gd20_register(devpath, spi, &g_l3gd20_config);
|
||||
if (ret != OK)
|
||||
{
|
||||
goto errout;
|
||||
}
|
||||
|
||||
errout:
|
||||
return ret;
|
||||
}
|
||||
|
||||
#endif /* CONFIG_SPI && CONFIG_SENSORS_L3GD20 */
|
||||
@@ -114,6 +114,11 @@
|
||||
#define GPIO_CS_SST25 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
|
||||
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN4)
|
||||
|
||||
/* L3GD20 MEMS*/
|
||||
|
||||
#define GPIO_L3GD20_DREADY (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTA|GPIO_PIN2)
|
||||
#define L3GD20_IRQ (2 + STM32_IRQ_EXTI0)
|
||||
|
||||
/* USB OTG HS
|
||||
*
|
||||
* PA9 OTG_HS_VBUS VBUS sensing (also connected to the green LED)
|
||||
@@ -275,6 +280,25 @@ FAR struct ili9341_lcd_s *stm32_ili93414ws_initialize(void);
|
||||
FAR struct spi_dev_s *stm32_spi5initialize(void);
|
||||
#endif
|
||||
|
||||
|
||||
#if defined(CONFIG_SPI) & defined(CONFIG_SENSORS_L3GD20)
|
||||
/****************************************************************************
|
||||
* Name: stm32_l3gd20initialize()
|
||||
*
|
||||
* Description:
|
||||
* Initialize and register the L3GD20 3 axis gyroscope sensor driver.
|
||||
*
|
||||
* Input parameters:
|
||||
* devpath - The full path to the driver to register. E.g., "/dev/gyro0"
|
||||
*
|
||||
* Returned Value:
|
||||
* Zero (OK) on success; a negated errno value on failure.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
int stm32_l3gd20initialize(FAR const char *devpath);
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIGS_STM32F429I_DISCO_SRC_STM32F429I_DISCO_H */
|
||||
|
||||
|
||||
@@ -32,6 +32,13 @@ config BMP180
|
||||
---help---
|
||||
Enable driver support for the Bosch BMP180 barometer sensor.
|
||||
|
||||
config SENSORS_L3GD20
|
||||
bool "ST L3GD20 Gyroscope Sensor support"
|
||||
default n
|
||||
select SPI
|
||||
---help---
|
||||
Enable driver support for the ST L3GD20 gyroscope sensor.
|
||||
|
||||
config SENSOR_KXTJ9
|
||||
bool "Kionix KXTJ9 Accelerometer support"
|
||||
default n
|
||||
|
||||
@@ -130,6 +130,10 @@ ifeq ($(CONFIG_LIS3MDL),y)
|
||||
CSRCS += lis3mdl.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_SENSORS_L3GD20),y)
|
||||
CSRCS += l3gd20.c
|
||||
endif
|
||||
|
||||
endif # CONFIG_SPI
|
||||
|
||||
# Quadrature encoder upper half
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,296 @@
|
||||
/****************************************************************************
|
||||
* drivers/sensors/l3gd20.c
|
||||
*
|
||||
* Authors: Mateusz Szafoni <raiden00@railab.me>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef __INCLUDE_NUTTX_SENSORS_L3GD20_H
|
||||
#define __INCLUDE_NUTTX_SENSORS_L3GD20_H
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/irq.h>
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/fs/ioctl.h>
|
||||
#include <nuttx/spi/spi.h>
|
||||
|
||||
#if defined(CONFIG_SPI) && defined(CONFIG_SENSORS_L3GD20)
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* SPI BUS PARAMETERS ********************************************************/
|
||||
|
||||
#define L3GD20_SPI_FREQUENCY (4000000) /* 4 MHz */
|
||||
#define L3GD20_SPI_MODE (SPIDEV_MODE3) /* Device uses SPI Mode 3: CPOL=1, CPHA=1 *
|
||||
|
||||
/* Register Addresses *******************************************************/
|
||||
/* Gyroscope registers */
|
||||
|
||||
#define L3GD20_WHO_AM_I 0x0F /* Accelerometer and gyroscope device identification */
|
||||
#define L3GD20_CTRL_REG_1 0x20 /* Gyroscope control register 1 */
|
||||
#define L3GD20_CTRL_REG_2 0x21 /* Gyroscope control register 2 */
|
||||
#define L3GD20_CTRL_REG_3 0x22 /* Gyroscope control register 3 */
|
||||
#define L3GD20_CTRL_REG_4 0x23 /* Gyroscope control register 4 */
|
||||
#define L3GD20_CTRL_REG_5 0x24 /* Gyroscope control register 5 */
|
||||
#define L3GD20_REF_REG 0x25 /* Gyroscope reference value for interrupt generation */
|
||||
#define L3GD20_OUT_TEMP_REG 0x26 /* Temperature data */
|
||||
#define L3GD20_STATUS_REG 0x27 /* Status register */
|
||||
#define L3GD20_OUT_X_L_REG 0x28 /* Gyroscope pitch (X) low byte */
|
||||
#define L3GD20_OUT_X_H_REG 0x29 /* Gyroscope pitch (X) high byte */
|
||||
#define L3GD20_OUT_Y_L_REG 0x2A /* Gyroscope roll (Y) low byte */
|
||||
#define L3GD20_OUT_Y_H_REG 0x2B /* Gyroscope roll (Y) high byte */
|
||||
#define L3GD20_OUT_Z_L_REG 0x2C /* Gyroscope yaw (Z) low byte */
|
||||
#define L3GD20_OUT_Z_H_REG 0x2D /* Gyroscope yaw (Z) high byte */
|
||||
#define L3GD20_FIFO_CTRL_REG 0x2E /* FIFO control register */
|
||||
#define L3GD20_FIFO_SRC_REG 0x2f /* FIFO status control register */
|
||||
#define L3GD20_INT_GEN_CFG_REG 0x30 /* Gyroscope interrupt configuration */
|
||||
#define L3GD20_INT_GEN_SRC_REG 0x31 /* Gyroscope interrupt source */
|
||||
#define L3GD20_INT_GEN_THS_X_H_REG 0x32 /* Gyroscope pitch (X) interrupt threshold high byte */
|
||||
#define L3GD20_INT_GEN_THS_X_L_REG 0x33 /* Gyroscope pitch (X) interrupt threshold low byte */
|
||||
#define L3GD20_INT_GEN_THS_Y_H_REG 0x34 /* Gyroscope roll (Y) interrupt threshold high byte */
|
||||
#define L3GD20_INT_GEN_THS_Y_L_REG 0x35 /* Gyroscope roll (Y) interrupt threshold low byte */
|
||||
#define L3GD20_INT_GEN_THS_Z_H_REG 0x36 /* Gyroscope yaw (Z) interrupt threshold high byte */
|
||||
#define L3GD20_INT_GEN_THS_Z_L_REG 0x37 /* Gyroscope yaw (Z) interrupt threshold low byte */
|
||||
#define L3GD20_INT_GEN_DUR_REG 0x38 /* Gyroscope interrupt duration */
|
||||
|
||||
|
||||
/* Register Bit Definitions *************************************************/
|
||||
|
||||
/* Device identification register */
|
||||
|
||||
#define L3GD20_WHO_AM_I_VALUE 0xD4
|
||||
|
||||
/* Gyroscope control register 1 */
|
||||
|
||||
#define L3GD20_CTRL_REG_1_X_EN_bm (1 << 0)
|
||||
#define L3GD20_CTRL_REG_1_Y_EN_bm (1 << 1)
|
||||
#define L3GD20_CTRL_REG_1_Z_EN_bm (1 << 2)
|
||||
#define L3GD20_CTRL_REG_1_POWERDOWN_bm (1 << 3)
|
||||
#define L3GD20_CTRL_REG_1_BW_0_bm (1 << 4)
|
||||
#define L3GD20_CTRL_REG_1_BW_1_bm (1 << 5)
|
||||
#define L3GD20_CTRL_REG_1_DR_0_bm (1 << 6)
|
||||
#define L3GD20_CTRL_REG_1_DR_1_bm (1 << 7)
|
||||
|
||||
/* Gyroscope control register 2 */
|
||||
|
||||
#define L3GD20_CTRL_REG_2_HPCF_0_bm (1 << 0)
|
||||
#define L3GD20_CTRL_REG_2_HPCF_1_bm (1 << 1)
|
||||
#define L3GD20_CTRL_REG_2_HPCF_2_bm (1 << 2)
|
||||
#define L3GD20_CTRL_REG_2_HPCF_3_bm (1 << 3)
|
||||
#define L3GD20_CTRL_REG_2_HPM_0_bm (1 << 4)
|
||||
#define L3GD20_CTRL_REG_2_HPM_1_bm (1 << 5)
|
||||
#define L3GD20_CTRL_REG_2_RES6_ (1 << 6)
|
||||
#define L3GD20_CTRL_REG_2_RES7_ (1 << 7)
|
||||
|
||||
/* Gyroscope control register 3 */
|
||||
|
||||
#define L3GD20_CTRL_REG_3_I2_EMPTY_bm (1 << 0)
|
||||
#define L3GD20_CTRL_REG_3_I2_ORUN_bm (1 << 1)
|
||||
#define L3GD20_CTRL_REG_3_I2_WTM_bm (1 << 2)
|
||||
#define L3GD20_CTRL_REG_3_I2_DRDY_bm (1 << 3)
|
||||
#define L3GD20_CTRL_REG_3_PP_OD_bm (1 << 4)
|
||||
#define L3GD20_CTRL_REG_3_H_LACTIVE_bm (1 << 5)
|
||||
#define L3GD20_CTRL_REG_3_I1_BOOT_bm (1 << 6)
|
||||
#define L3GD20_CTRL_REG_3_I1_INT1_bm (1 << 7)
|
||||
|
||||
|
||||
/* Gyroscope control register 4 */
|
||||
|
||||
#define L3GD20_CTRL_REG_4_SIM_bm (1 << 0)
|
||||
#define L3GD20_CTRL_REG_4_RES1_ (1 << 1)
|
||||
#define L3GD20_CTRL_REG_4_RES2_ (1 << 2)
|
||||
#define L3GD20_CTRL_REG_4_RES3_ (1 << 3)
|
||||
#define L3GD20_CTRL_REG_4_FS_0_bm (1 << 4)
|
||||
#define L3GD20_CTRL_REG_4_FS_1_bm (1 << 5)
|
||||
#define L3GD20_CTRL_REG_4_BLE_bm (1 << 6)
|
||||
#define L3GD20_CTRL_REG_4_BDU_bm (1 << 7)
|
||||
|
||||
/* Gyroscope control register 5 */
|
||||
|
||||
#define L3GD20_CTRL_REG_5_OUT_SEL_0_bm (1 << 0)
|
||||
#define L3GD20_CTRL_REG_5_OUT_SEL_1_bm (1 << 1)
|
||||
#define L3GD20_CTRL_REG_5_INT1_SEL_0_bm (1 << 2)
|
||||
#define L3GD20_CTRL_REG_5_INT1_SEL_1_bm (1 << 3)
|
||||
#define L3GD20_CTRL_REG_5_HP_EN_bm (1 << 4)
|
||||
#define L3GD20_CTRL_REG_5_RES5_ (1 << 5)
|
||||
#define L3GD20_CTRL_REG_5_FIFO_EN_bm (1 << 6)
|
||||
#define L3GD20_CTRL_REG_5_BOOT_bm (1 << 7)
|
||||
|
||||
/* Status register */
|
||||
|
||||
#define L3GD20_STATUS_REG_X_DA_bm (1 << 0)
|
||||
#define L3GD20_STATUS_REG_Y_DA_bm (1 << 1)
|
||||
#define L3GD20_STATUS_REG_Z_DA_bm (1 << 2)
|
||||
#define L3GD20_STATUS_REG_ZYX_DA_bm (1 << 3)
|
||||
#define L3GD20_STATUS_REG_X_OR_bm (1 << 4)
|
||||
#define L3GD20_STATUS_REG_Y_OR_bm (1 << 5)
|
||||
#define L3GD20_STATUS_REG_Z_OR_bm (1 << 6)
|
||||
#define L3GD20_STATUS_REG_ZYX_OR_bm (1 << 7)
|
||||
|
||||
/* FIFO control register */
|
||||
|
||||
#define L3GD20_FIFO_CTRL_WTM_0_bm (1 << 0)
|
||||
#define L3GD20_FIFO_CTRL_WTM_1_bm (1 << 1)
|
||||
#define L3GD20_FIFO_CTRL_WTM_2_bm (1 << 2)
|
||||
#define L3GD20_FIFO_CTRL_WTM_3_bm (1 << 3)
|
||||
#define L3GD20_FIFO_CTRL_WTM_4_bm (1 << 4)
|
||||
#define L3GD20_FIFO_CTRL_FM_0_bm (1 << 5)
|
||||
#define L3GD20_FIFO_CTRL_FM_1_bm (1 << 6)
|
||||
#define L3GD20_FIFO_CTRL_FM_2_bm (1 << 7)
|
||||
#define L3GD20_FIFO_CTRL_FMODE_BYPASS (0)
|
||||
#define L3GD20_FIFO_CTRL_FMODE_FIFO (L3GD20_FIFO_CTRL_FM0)
|
||||
#define L3GD20_FIFO_CTRL_FMODE_CONT (L3GD20_FIFO_CTRL_FM1)
|
||||
#define L3GD20_FIFO_CTRL_FMODE_CONT_FIFO (L3GD20_FIFO_CTRL_FM1 | L3GD20_FIFO_CTRL_FM0)
|
||||
#define L3GD20_FIFO_CTRL_FMODE_BYPASS_CONT (L3GD20_FIFO_CTRL_FM2 | L3GD20_FIFO_CTRL_FM1)
|
||||
|
||||
/* FIFO status control register */
|
||||
|
||||
#define L3GD20_FIFO_SRC_FSS_0_bm (1 << 0)
|
||||
#define L3GD20_FIFO_SRC_FSS_1_bm (1 << 1)
|
||||
#define L3GD20_FIFO_SRC_FSS_2_bm (1 << 2)
|
||||
#define L3GD20_FIFO_SRC_FSS_3_bm (1 << 3)
|
||||
#define L3GD20_FIFO_SRC_FSS_4_bm (1 << 4)
|
||||
#define L3GD20_FIFO_SRC_EMPTY_bm (1 << 5)
|
||||
#define L3GD20_FIFO_SRC_OVRUN_bm (1 << 6)
|
||||
#define L3GD20_FIFO_SRC_WTM_bm (1 << 7)
|
||||
|
||||
/* Gyroscope interrupt configuration */
|
||||
|
||||
#define L3GD20_INT_GEN_CFG_X_L_IE_bm (1 << 0)
|
||||
#define L3GD20_INT_GEN_CFG_X_H_IE_bm (1 << 1)
|
||||
#define L3GD20_INT_GEN_CFG_Y_L_IE_bm (1 << 2)
|
||||
#define L3GD20_INT_GEN_CFG_Y_H_IE_bm (1 << 3)
|
||||
#define L3GD20_INT_GEN_CFG_Z_L_IE_bm (1 << 4)
|
||||
#define L3GD20_INT_GEN_CFG_Z_H_IE_bm (1 << 5)
|
||||
#define L3GD20_INT_GEN_CFG_LIR_bm (1 << 6)
|
||||
#define L3GD20_INT_GEN_CFG_AOI_bm (1 << 7)
|
||||
|
||||
|
||||
/* Gyroscope interrupt source */
|
||||
|
||||
#define L3GD20_INT_GEN_SRC_X_L_bm (1 << 0)
|
||||
#define L3GD20_INT_GEN_SRC_X_H_bm (1 << 1)
|
||||
#define L3GD20_INT_GEN_SRC_Y_L_bm (1 << 2)
|
||||
#define L3GD20_INT_GEN_SRC_Y_H_bm (1 << 3)
|
||||
#define L3GD20_INT_GEN_SRC_Z_L_bm (1 << 4)
|
||||
#define L3GD20_INT_GEN_SRC_Z_H_bm (1 << 5)
|
||||
#define L3GD20_INT_GEN_SRC_I_A_bm (1 << 6)
|
||||
#define L3GD20_INT_GEN_SRC_RES7_ (1 << 7)
|
||||
|
||||
/****************************************************************************
|
||||
* Public Types
|
||||
****************************************************************************/
|
||||
|
||||
/* A reference to a structure of this type must be passed to the L3GD20
|
||||
* driver. This structure provides information about the configuration
|
||||
* of the sensor and provides some board-specific hooks.
|
||||
*
|
||||
* Memory for this structure is provided by the caller. It is not copied
|
||||
* by the driver and is presumed to persist while the driver is active.
|
||||
*/
|
||||
|
||||
struct l3gd20_config_s
|
||||
{
|
||||
/* Since multiple L3GD20 can be connected to the same SPI bus we need
|
||||
* to use multiple spi device ids which are employed by NuttX to select/
|
||||
* deselect the desired L3GD20 chip via their chip select inputs.
|
||||
*/
|
||||
|
||||
int spi_devid;
|
||||
|
||||
/* The IRQ number must be provided for each L3GD20 device so that
|
||||
* their interrupts can be distinguished.
|
||||
*/
|
||||
|
||||
int irq;
|
||||
|
||||
/* Attach the L3GD20 interrupt handler to the GPIO interrupt of the
|
||||
* concrete L3GD20 instance.
|
||||
*/
|
||||
|
||||
int (*attach)(FAR struct l3gd20_config_s *, xcpt_t);
|
||||
};
|
||||
|
||||
/* Data returned by reading from the L3GD20 is returned in this format. */
|
||||
|
||||
struct l3gd20_sensor_data_s
|
||||
{
|
||||
int16_t x_gyr; /* Measurement result for x axis */
|
||||
int16_t y_gyr; /* Measurement result for y axis */
|
||||
int16_t z_gyr; /* Measurement result for z axis */
|
||||
int8_t temperature; /* Measurement result for temperature sensor */
|
||||
};
|
||||
|
||||
|
||||
/****************************************************************************
|
||||
* Public Function Prototypes
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef __cplusplus
|
||||
#define EXTERN extern "C"
|
||||
extern "C"
|
||||
{
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
|
||||
/****************************************************************************
|
||||
* Name: l3gd20_register
|
||||
*
|
||||
* Description:
|
||||
* Register the L3DF20 character device as 'devpath'.
|
||||
*
|
||||
* Input Parameters:
|
||||
* devpath - The full path to the driver to register, e.g., "/dev/gyr0".
|
||||
* i2c - An SPI driver instance.
|
||||
* config - configuration for the L3GD20 driver. For details see
|
||||
* description above.
|
||||
*
|
||||
* Returned Value:
|
||||
* Zero (OK) on success; a negated errno value on failure.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
int l3gd20_register(FAR const char *devpath, FAR struct spi_dev_s *spi,
|
||||
FAR struct l3gd20_config_s *config);
|
||||
|
||||
#undef EXTERN
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* CONFIG_SPI && CONFIG_SENSORS_L3GD20 */
|
||||
#endif /* __INCLUDE_NUTTX_SENSORS_L3GD20_H */
|
||||
Reference in New Issue
Block a user