mirror of
https://github.com/apache/nuttx.git
synced 2026-06-06 00:14:22 +08:00
Add initial support for the STM32 F7 Discovery board
This commit is contained in:
Gregory Nutt
@@ -873,6 +873,17 @@ config ARCH_BOARD_STM32F429I_DISCO
|
||||
---help---
|
||||
STMicro STM32F429I-Discovery board based on the STMicro STM32F429ZIT6 MCU.
|
||||
|
||||
config ARCH_BOARD_STM32F746G_DISCO
|
||||
bool "STMicro STM32F746G-Discovery board"
|
||||
depends on ARCH_CHIP_STM32F746
|
||||
select ARCH_HAVE_LEDS
|
||||
select ARCH_HAVE_BUTTONS
|
||||
select ARCH_HAVE_IRQBUTTONS
|
||||
---help---
|
||||
STMicro STM32F746G-DISCO development board featuring the STM32F746NGH6
|
||||
MCU. The STM32F746NGH6 is a 216MHz Cortex-M7 operation with 1024Kb Flash
|
||||
memory and 300Kb SRAM.
|
||||
|
||||
config ARCH_BOARD_STM32L_DISCOVERY
|
||||
bool "STMicro STM32L-Discovery board"
|
||||
depends on ARCH_CHIP_STM32L152RB
|
||||
@@ -1273,6 +1284,7 @@ config ARCH_BOARD
|
||||
default "stm32f3discovery" if ARCH_BOARD_STM32F3_DISCOVERY
|
||||
default "stm32f4discovery" if ARCH_BOARD_STM32F4_DISCOVERY
|
||||
default "stm32f429i-disco" if ARCH_BOARD_STM32F429I_DISCO
|
||||
default "stm32f746g-disco" if ARCH_BOARD_STM32F746G_DISCO
|
||||
default "stm32ldiscovery" if ARCH_BOARD_STM32L_DISCOVERY
|
||||
default "stm32vldiscovery" if ARCH_BOARD_STM32VL_DISCOVERY
|
||||
default "mikroe-stm32f4" if ARCH_BOARD_MIKROE_STM32F4
|
||||
@@ -1606,6 +1618,9 @@ endif
|
||||
if ARCH_BOARD_STM32F429I_DISCO
|
||||
source "configs/stm32f429i-disco/Kconfig"
|
||||
endif
|
||||
if ARCH_BOARD_STM32F746G_DISCO
|
||||
source "configs/stm32f746g-disco/Kconfig"
|
||||
endif
|
||||
if ARCH_BOARD_STM32L_DISCOVERY
|
||||
source "configs/stm32ldiscovery/Kconfig"
|
||||
endif
|
||||
|
||||
@@ -607,6 +607,11 @@ configs/stm32f4discovery
|
||||
configs/stm32f429i-disco
|
||||
STMicro STM32F429I-Discovery board based on the STMicro STM32F429ZIT6 MCU.
|
||||
|
||||
configs/stm32f746g-disco
|
||||
STMicro STM32F746G-DISCO development board featuring the STM32F746NGH6
|
||||
MCU. The STM32F746NGH6 is a 216MHz Cortex-M7 operation with 1024Kb Flash
|
||||
memory and 300Kb SRAM.
|
||||
|
||||
configs/stm32ldiscovery
|
||||
STMicro STM32L-Discovery board based on the STMicro STM32L152RB MCU.
|
||||
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
#
|
||||
# For a description of the syntax of this configuration file,
|
||||
# see the file kconfig-language.txt in the NuttX tools repository.
|
||||
#
|
||||
|
||||
if ARCH_BOARD_STM32F746G_DISCO
|
||||
|
||||
endif # ARCH_BOARD_STM32F746G_DISCO
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,294 @@
|
||||
/************************************************************************************
|
||||
* configs/stm32f746g-disco/include/board.h
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __CONFIG_STM32F746G_DISCO_INCLUDE_BOARD_H
|
||||
#define __CONFIG_STM32F746G_DISCO_INCLUDE_BOARD_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
# include <stdint.h>
|
||||
#endif
|
||||
|
||||
#include "stm32_rcc.h"
|
||||
#include "stm32_sdio.h"
|
||||
#include "stm32.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Clocking *************************************************************************/
|
||||
/* The STM32F7 Discovery board features a single 8MHz crystal. Space is provided
|
||||
* for a 32kHz RTC backup crystal, but it is not stuffed.
|
||||
*
|
||||
* This is the canonical configuration:
|
||||
* System Clock source : PLL (HSE)
|
||||
* SYSCLK(Hz) : 180000000 Determined by PLL configuration
|
||||
* HCLK(Hz) : 180000000 (STM32_RCC_CFGR_HPRE)
|
||||
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
|
||||
* APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1)
|
||||
* APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2)
|
||||
* HSE Frequency(Hz) : 8000000 (STM32_BOARD_XTAL)
|
||||
* PLLM : 8 (STM32_PLLCFG_PLLM)
|
||||
* PLLN : 336 (STM32_PLLCFG_PLLN)
|
||||
* PLLP : 2 (STM32_PLLCFG_PLLP)
|
||||
* PLLQ : 7 (STM32_PLLCFG_PLLQ)
|
||||
* Main regulator output voltage : Scale1 mode Needed for high speed SYSCLK
|
||||
* Flash Latency(WS) : 5
|
||||
* Prefetch Buffer : OFF
|
||||
* Instruction cache : ON
|
||||
* Data cache : ON
|
||||
* Require 48MHz for USB OTG FS, : Enabled
|
||||
* SDIO and RNG clock
|
||||
*/
|
||||
|
||||
/* HSI - 16 MHz RC factory-trimmed
|
||||
* LSI - 32 KHz RC
|
||||
* HSE - On-board crystal frequency is 8MHz
|
||||
* LSE - 32.768 kHz
|
||||
*/
|
||||
|
||||
#define STM32_BOARD_XTAL 8000000ul
|
||||
|
||||
#define STM32_HSI_FREQUENCY 16000000ul
|
||||
#define STM32_LSI_FREQUENCY 32000
|
||||
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
||||
#define STM32_LSE_FREQUENCY 32768
|
||||
|
||||
/* Main PLL Configuration.
|
||||
*
|
||||
* PLL source is HSE
|
||||
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
|
||||
* = (8,000,000 / 8) * 336
|
||||
* = 336,000,000
|
||||
* SYSCLK = PLL_VCO / PLLP
|
||||
* = 336,000,000 / 2 = 168,000,000
|
||||
* USB OTG FS, SDIO and RNG Clock
|
||||
* = PLL_VCO / PLLQ
|
||||
* = 48,000,000
|
||||
*/
|
||||
|
||||
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(8)
|
||||
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(336)
|
||||
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
|
||||
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7)
|
||||
|
||||
#define STM32_SYSCLK_FREQUENCY 168000000ul
|
||||
|
||||
/* AHB clock (HCLK) is SYSCLK (168MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
||||
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
||||
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
||||
|
||||
/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
|
||||
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
|
||||
|
||||
/* Timers driven from APB1 will be twice PCLK1 */
|
||||
|
||||
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
|
||||
/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
|
||||
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
||||
|
||||
/* Timers driven from APB2 will be twice PCLK2 */
|
||||
|
||||
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
|
||||
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
||||
* otherwise frequency is 2xAPBx.
|
||||
* Note: TIM1,8 are on APB2, others on APB1
|
||||
*/
|
||||
|
||||
#define STM32_TIM18_FREQUENCY STM32_HCLK_FREQUENCY
|
||||
#define STM32_TIM27_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
||||
|
||||
/* LED definitions ******************************************************************/
|
||||
/* The STM32F746G-DISCO board has numerous LEDs but only one, LD1 located near the
|
||||
* reset button, that can be controlled by software (LD2 is a power indicator, LD3-6
|
||||
* indicate USB status, LD7 is controlled by the ST-Link).
|
||||
*
|
||||
* LD1 is controlled by PI1 which is also the SPI2_SCK at the Arduino interface.
|
||||
* One end of LD1 is grounded so a high output on PI1 willilluminate the LED.
|
||||
*
|
||||
* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
|
||||
* The following definitions are used to access individual LEDs.
|
||||
*/
|
||||
|
||||
/* LED index values for use with stm32_setled() */
|
||||
|
||||
#define BOARD_LED1 0
|
||||
#define BOARD_NLEDS 1
|
||||
|
||||
#define BOARD_LD1 BOARD_LED1
|
||||
|
||||
/* LED bits for use with stm32_setleds() */
|
||||
|
||||
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
||||
|
||||
/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
|
||||
* include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
|
||||
* events as follows:
|
||||
*
|
||||
* SYMBOL Meaning LD1
|
||||
* ------------------- ----------------------- ------
|
||||
* LED_STARTED NuttX has been started OFF
|
||||
* LED_HEAPALLOCATE Heap has been allocated OFF
|
||||
* LED_IRQSENABLED Interrupts enabled OFF
|
||||
* LED_STACKCREATED Idle stack created ON
|
||||
* LED_INIRQ In an interrupt N/C
|
||||
* LED_SIGNAL In a signal handler N/C
|
||||
* LED_ASSERTION An assertion failed N/C
|
||||
* LED_PANIC The system has crashed FLASH
|
||||
*
|
||||
* Thus is LD1 is statically on, NuttX has successfully booted and is,
|
||||
* apparently, running normally. If LD1 is flashing at approximately
|
||||
* 2Hz, then a fatal error has been detected and the system has halted.
|
||||
*/
|
||||
|
||||
#define LED_STARTED 0 /* LD1=OFF */
|
||||
#define LED_HEAPALLOCATE 0 /* LD1=OFF */
|
||||
#define LED_IRQSENABLED 0 /* LD1=OFF */
|
||||
#define LED_STACKCREATED 1 /* LD1=ON */
|
||||
#define LED_INIRQ 2 /* LD1=no change */
|
||||
#define LED_SIGNAL 2 /* LD1=no change */
|
||||
#define LED_ASSERTION 2 /* LD1=no change */
|
||||
#define LED_PANIC 3 /* LD1=flashing */
|
||||
|
||||
/* Button definitions ***************************************************************/
|
||||
/* Pushbutton B1, labelled "User", is connected to GPIO PI11. A high
|
||||
value will be sensed when the button is depressed.
|
||||
|
||||
/* The STM32F7 Discovery supports one button: */
|
||||
|
||||
#define BUTTON_USER 0
|
||||
|
||||
#define NUM_BUTTONS 1
|
||||
|
||||
#define BUTTON_USER_BIT (1 << BUTTON_USER)
|
||||
|
||||
/* Alternate function pin selections ************************************************/
|
||||
|
||||
/* USART6:
|
||||
*
|
||||
* These configurations assume that you are using a standard Arduio RS-232 shield
|
||||
* with the serial interface with RX on pin D0 and TX on pin D1:
|
||||
*
|
||||
* -------- ---------------
|
||||
* STM32F7
|
||||
* ARDUIONO FUNCTION GPIO
|
||||
* -- ----- --------- -----
|
||||
* DO RX USART6_RX PC7
|
||||
* D1 TX USART6_TX PC6
|
||||
* -- ----- --------- -----
|
||||
*/
|
||||
|
||||
#warning Missing logic
|
||||
#define GPIO_USART6_RX ???
|
||||
#define GPIO_USART6_TX ???
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
#define EXTERN extern "C"
|
||||
extern "C"
|
||||
{
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************/
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the initialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32_boardinitialize(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_ledinit, stm32_setled, and stm32_setleds
|
||||
*
|
||||
* Description:
|
||||
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LEDs. If
|
||||
* CONFIG_ARCH_LEDS is not defined, then the following interfaces are available to
|
||||
* control the LEDs from user applications.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef CONFIG_ARCH_LEDS
|
||||
void stm32_ledinit(void);
|
||||
void stm32_setled(int led, bool ledon);
|
||||
void stm32_setleds(uint8_t ledset);
|
||||
#endif
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIG_STM32F746G_DISCO_INCLUDE_BOARD_H */
|
||||
@@ -0,0 +1,112 @@
|
||||
############################################################################
|
||||
# configs/stm32f746g-disco/nsh/Make.defs
|
||||
#
|
||||
# Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
LDSCRIPT = flash.ld
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(ARCROSSDEV)ar rcs
|
||||
NM = $(ARCROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
||||
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,77 @@
|
||||
#!/bin/bash
|
||||
# configs/stm32f746g-disco/nsh/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the Atmel GCC
|
||||
# toolchain under Windows. You will also have to edit this if you install
|
||||
# this toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
# export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
|
||||
# This is the location where I installed the ARM "GNU Tools for ARM Embedded Processors"
|
||||
# You can this free toolchain here https://launchpad.net/gcc-arm-embedded
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/GNU Tools ARM Embedded/4.9 2014q4/bin"
|
||||
|
||||
# This is the path to the location where I installed the devkitARM toolchain
|
||||
# You can get this free toolchain from http://devkitpro.org/ or http://sourceforge.net/projects/devkitpro/
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/devkitARM/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
# export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
@@ -0,0 +1,128 @@
|
||||
/****************************************************************************
|
||||
* configs/stm32f746g-disco/scripts/flash.ld
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Modified 11/4/2013 for STM32F429 support
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The STM32F746NGH6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
|
||||
* 320Kb of data SRAM (in addition to ITCM SRAM). SRAM is split up into three
|
||||
* blocks:
|
||||
*
|
||||
* 1) 64Kb of DTCM SRM beginin at address 0x2000:0000
|
||||
* 1) 240Kb of SRAM1 beginning at address 0x2001:0000
|
||||
* 2) 16Kb of SRAM2 beginning at address 0x2004:c000
|
||||
*
|
||||
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
|
||||
* where the code expects to begin execution by jumping to the entry point in
|
||||
* the 0x0800:0000 address
|
||||
* range.
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
itcm (rwx) : ORIGIN = 0x00000000, LENGTH = 64K
|
||||
flash (rx) : ORIGIN = 0x08000000, LENGTH = 2048K
|
||||
dtcm (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
|
||||
sram1 (rwx) : ORIGIN = 0x20010000, LENGTH = 240K
|
||||
sram2 (rwx) : ORIGIN = 0x2004c000, LENGTH = 16K
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
*(.init_array .init_array.*)
|
||||
_einit = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > flash
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > flash
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram1 AT > flash
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram1
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
@@ -0,0 +1,2 @@
|
||||
/.depend
|
||||
/Make.dep
|
||||
@@ -0,0 +1,110 @@
|
||||
############################################################################
|
||||
# configs/stm32f746g-disco/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
CFLAGS += -I$(TOPDIR)/sched
|
||||
|
||||
ASRCS =
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
|
||||
CSRCS = stm32_boot.c stm32_spi.c
|
||||
|
||||
ifeq ($(CONFIG_HAVE_CXX),y)
|
||||
CSRCS += stm32_cxxinitialize.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_ARCH_LEDS),y)
|
||||
CSRCS += stm32_autoleds.c
|
||||
else
|
||||
CSRCS += stm32_userleds.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_ARCH_BUTTONS),y)
|
||||
CSRCS += stm32_buttons.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_LIB_BOARDCTL),y)
|
||||
CSRCS += stm32_applinitialize.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_ARCH_FPU),y)
|
||||
CSRCS += stm32_ostest.c
|
||||
endif
|
||||
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
OBJS = $(AOBJS) $(COBJS)
|
||||
|
||||
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
|
||||
ifeq ($(CONFIG_WINDOWS_NATIVE),y)
|
||||
CFLAGS += -I$(ARCH_SRCDIR)\chip -I$(ARCH_SRCDIR)\common -I$(ARCH_SRCDIR)\armv7-m
|
||||
else
|
||||
ifeq ($(WINTOOL),y)
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
|
||||
else
|
||||
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
|
||||
endif
|
||||
endif
|
||||
|
||||
all: libboard$(LIBEXT)
|
||||
|
||||
$(AOBJS): %$(OBJEXT): %.S
|
||||
$(call ASSEMBLE, $<, $@)
|
||||
|
||||
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
||||
$(call COMPILE, $<, $@)
|
||||
|
||||
libboard$(LIBEXT): $(OBJS)
|
||||
$(call ARCHIVE, $@, $(OBJS))
|
||||
|
||||
.depend: Makefile $(SRCS)
|
||||
$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||
$(Q) touch $@
|
||||
|
||||
depend: .depend
|
||||
|
||||
clean:
|
||||
$(call DELFILE, libboard$(LIBEXT))
|
||||
$(call CLEAN)
|
||||
|
||||
distclean: clean
|
||||
$(call DELFILE, Make.dep)
|
||||
$(call DELFILE, .depend)
|
||||
|
||||
-include Make.dep
|
||||
@@ -0,0 +1,65 @@
|
||||
/****************************************************************************
|
||||
* config/stm32f746g-disco/src/stm32_appinitilaize.c
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include "stm32f746g-disco.h"
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_app_initialize
|
||||
*
|
||||
* Description:
|
||||
* Perform application specific initialization. This function is never
|
||||
* called directly from application code, but only indirectly via the
|
||||
* (non-standard) boardctl() interface using the command BOARDIOC_INIT.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
int board_app_initialize(void)
|
||||
{
|
||||
return OK;
|
||||
}
|
||||
@@ -0,0 +1,142 @@
|
||||
/****************************************************************************
|
||||
* configs/stm32f746g-disco/src/stm32_autoleds.c
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/board.h>
|
||||
|
||||
#include "stm32f7-gpio.h"
|
||||
#include "stm32f746g-disco.h"
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG
|
||||
* with CONFIG_DEBUG_VERBOSE too)
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_DEBUG_LEDS
|
||||
# define leddbg lldbg
|
||||
# define ledvdbg llvdbg
|
||||
#else
|
||||
# define leddbg(x...)
|
||||
# define ledvdbg(x...)
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_led_initialize
|
||||
****************************************************************************/
|
||||
|
||||
void board_led_initialize(void)
|
||||
{
|
||||
/* Configure the LD1 GPIO for output. Initial state is OFF */
|
||||
|
||||
stm32_configgpio(GPIO_LD1);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_led_on
|
||||
****************************************************************************/
|
||||
|
||||
void board_led_on(int led)
|
||||
{
|
||||
bool ledstate = false;
|
||||
|
||||
switch (led)
|
||||
{
|
||||
case 0: /* LED_STARTED: NuttX has been started STATUS LED=OFF */
|
||||
/* LED_HEAPALLOCATE: Heap has been allocated STATUS LED=OFF */
|
||||
/* LED_IRQSENABLED: Interrupts enabled STATUS LED=OFF */
|
||||
break; /* Leave ledstate == true to turn OFF */
|
||||
|
||||
default:
|
||||
case 2: /* LED_INIRQ: In an interrupt STATUS LED=N/C */
|
||||
/* LED_SIGNAL: In a signal handler STATUS LED=N/C */
|
||||
/* LED_ASSERTION: An assertion failed STATUS LED=N/C */
|
||||
return; /* Return to leave STATUS LED unchanged */
|
||||
|
||||
case 3: /* LED_PANIC: The system has crashed STATUS LED=FLASH */
|
||||
case 1: /* LED_STACKCREATED: Idle stack created STATUS LED=ON */
|
||||
ledstate = true; /* Set ledstate == false to turn ON */
|
||||
break;
|
||||
}
|
||||
|
||||
stm32_gpiowrite(GPIO_LD1, ledstate);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_led_off
|
||||
****************************************************************************/
|
||||
|
||||
void board_led_off(int led)
|
||||
{
|
||||
switch (led)
|
||||
{
|
||||
/* These should not happen and are ignored */
|
||||
|
||||
default:
|
||||
case 0: /* LED_STARTED: NuttX has been started STATUS LED=OFF */
|
||||
/* LED_HEAPALLOCATE: Heap has been allocated STATUS LED=OFF */
|
||||
/* LED_IRQSENABLED: Interrupts enabled STATUS LED=OFF */
|
||||
case 1: /* LED_STACKCREATED: Idle stack created STATUS LED=ON */
|
||||
|
||||
/* These result in no-change */
|
||||
|
||||
case 2: /* LED_INIRQ: In an interrupt STATUS LED=N/C */
|
||||
/* LED_SIGNAL: In a signal handler STATUS LED=N/C */
|
||||
/* LED_ASSERTION: An assertion failed STATUS LED=N/C */
|
||||
return; /* Return to leave STATUS LED unchanged */
|
||||
|
||||
/* Turn STATUS LED off set driving the output high */
|
||||
|
||||
case 3: /* LED_PANIC: The system has crashed STATUS LED=FLASH */
|
||||
stm32_gpiowrite(GPIO_LD1, false);
|
||||
break;
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,130 @@
|
||||
/************************************************************************************
|
||||
* configs/stm32f746g-disco/src/stm32_boot.c
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/board.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "stm32f746g-disco.h"
|
||||
#include "stm32_ccm.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the initialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32_boardinitialize(void)
|
||||
{
|
||||
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || \
|
||||
defined(CONFIG_STM32_SPI3) || defined(CONFIG_STM32_SPI4) || \
|
||||
defined(CONFIG_STM32_SPI5)
|
||||
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
|
||||
* stm32_spiinitialize() has been brought into the link.
|
||||
*/
|
||||
|
||||
if (stm32_spiinitialize)
|
||||
{
|
||||
stm32_spiinitialize();
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
/* Configure on-board LEDs if LED support has been selected. */
|
||||
|
||||
board_led_initialize();
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_FSMC
|
||||
stm32_enablefsmc();
|
||||
#endif
|
||||
|
||||
#ifdef HAVE_CCM_HEAP
|
||||
/* Initialize CCM allocator */
|
||||
|
||||
ccm_initialize();
|
||||
#endif
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_initialize
|
||||
*
|
||||
* Description:
|
||||
* If CONFIG_BOARD_INITIALIZE is selected, then an additional
|
||||
* initialization call will be performed in the boot-up sequence to a
|
||||
* function called board_initialize(). board_initialize() will be
|
||||
* called immediately after up_initialize() is called and just before the
|
||||
* initial application is started. This additional initialization phase
|
||||
* may be used, for example, to initialize board-specific device drivers.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_BOARD_INITIALIZE
|
||||
void board_initialize(void)
|
||||
{
|
||||
#if defined(CONFIG_NSH_LIBRARY) && !defined(CONFIG_NSH_ARCHINIT)
|
||||
/* Perform NSH initialization here instead of from the NSH. This
|
||||
* alternative NSH initialization is necessary when NSH is ran in user-space
|
||||
* but the initialization function must run in kernel space.
|
||||
*/
|
||||
|
||||
(void)board_app_initialize();
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
@@ -0,0 +1,111 @@
|
||||
/****************************************************************************
|
||||
* configs/stm32f746g-disco/src/stm32_buttons.c
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <nuttx/irq.h>
|
||||
#include <nuttx/board.h>
|
||||
|
||||
#include "stm32f746g-disco.h"
|
||||
|
||||
#ifdef CONFIG_ARCH_BUTTONS
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_button_initialize
|
||||
*
|
||||
* Description:
|
||||
* board_button_initialize() must be called to initialize button resources.
|
||||
* After that, board_buttons() may be called to collect the current state
|
||||
* of all buttons or board_button_irq() may be called to register button
|
||||
* interrupt handlers.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void board_button_initialize(void)
|
||||
{
|
||||
stm32_configgpio(GPIO_BTN_USER);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_buttons
|
||||
****************************************************************************/
|
||||
|
||||
uint8_t board_buttons(void)
|
||||
{
|
||||
return stm32_gpioread(GPIO_BTN_USER) ? 1 : 0;
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Button support.
|
||||
*
|
||||
* Description:
|
||||
* board_button_initialize() must be called to initialize button resources. After
|
||||
* that, board_buttons() may be called to collect the current state of all
|
||||
* buttons or board_button_irq() may be called to register button interrupt
|
||||
* handlers.
|
||||
*
|
||||
* After board_button_initialize() has been called, board_buttons() may be called to
|
||||
* collect the state of all buttons. board_buttons() returns an 8-bit bit set
|
||||
* with each bit associated with a button. See the BUTTON_*_BIT
|
||||
* definitions in board.h for the meaning of each bit.
|
||||
*
|
||||
* board_button_irq() may be called to register an interrupt handler that will
|
||||
* be called when a button is depressed or released. The ID value is a
|
||||
* button enumeration value that uniquely identifies a button resource. See the
|
||||
* BUTTON_* definitions in board.h for the meaning of enumeration
|
||||
* value. The previous interrupt handler address is returned (so that it may
|
||||
* restored, if so desired).
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_IRQBUTTONS
|
||||
xcpt_t board_button_irq(int id, xcpt_t irqhandler)
|
||||
{
|
||||
#warning Missing logic
|
||||
}
|
||||
#endif
|
||||
#endif /* CONFIG_ARCH_BUTTONS */
|
||||
@@ -0,0 +1,154 @@
|
||||
/************************************************************************************
|
||||
* configs/stm32f746g-disco/src/stm32_cxxinitialize.c
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/arch.h>
|
||||
|
||||
#include <arch/stm32/chip.h>
|
||||
#include "chip.h"
|
||||
|
||||
#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE)
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
/* Debug ****************************************************************************/
|
||||
/* Non-standard debug that may be enabled just for testing the static constructors */
|
||||
|
||||
#ifndef CONFIG_DEBUG
|
||||
# undef CONFIG_DEBUG_CXX
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_DEBUG_CXX
|
||||
# define cxxdbg dbg
|
||||
# define cxxlldbg lldbg
|
||||
# ifdef CONFIG_DEBUG_VERBOSE
|
||||
# define cxxvdbg vdbg
|
||||
# define cxxllvdbg llvdbg
|
||||
# else
|
||||
# define cxxvdbg(x...)
|
||||
# define cxxllvdbg(x...)
|
||||
# endif
|
||||
#else
|
||||
# define cxxdbg(x...)
|
||||
# define cxxlldbg(x...)
|
||||
# define cxxvdbg(x...)
|
||||
# define cxxllvdbg(x...)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Types
|
||||
************************************************************************************/
|
||||
/* This type defines one entry in initialization array */
|
||||
|
||||
typedef void (*initializer_t)(void);
|
||||
|
||||
/************************************************************************************
|
||||
* External references
|
||||
************************************************************************************/
|
||||
/* _sinit and _einit are symbols exported by the linker script that mark the
|
||||
* beginning and the end of the C++ initialization section.
|
||||
*/
|
||||
|
||||
extern initializer_t _sinit;
|
||||
extern initializer_t _einit;
|
||||
|
||||
/* _stext and _etext are symbols exported by the linker script that mark the
|
||||
* beginning and the end of text.
|
||||
*/
|
||||
|
||||
extern uint32_t _stext;
|
||||
extern uint32_t _etext;
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_cxxinitialize
|
||||
*
|
||||
* Description:
|
||||
* If C++ and C++ static constructors are supported, then this function
|
||||
* must be provided by board-specific logic in order to perform
|
||||
* initialization of the static C++ class instances.
|
||||
*
|
||||
* This function should then be called in the application-specific
|
||||
* user_start logic in order to perform the C++ initialization. NOTE
|
||||
* that no component of the core NuttX RTOS logic is involved; This
|
||||
* function defintion only provides the 'contract' between application
|
||||
* specific C++ code and platform-specific toolchain support
|
||||
*
|
||||
***************************************************************************/
|
||||
|
||||
void up_cxxinitialize(void)
|
||||
{
|
||||
initializer_t *initp;
|
||||
|
||||
cxxdbg("_sinit: %p _einit: %p _stext: %p _etext: %p\n",
|
||||
&_sinit, &_einit, &_stext, &_etext);
|
||||
|
||||
/* Visit each entry in the initialzation table */
|
||||
|
||||
for (initp = &_sinit; initp != &_einit; initp++)
|
||||
{
|
||||
initializer_t initializer = *initp;
|
||||
cxxdbg("initp: %p initializer: %p\n", initp, initializer);
|
||||
|
||||
/* Make sure that the address is non-NULL and lies in the text region
|
||||
* defined by the linker script. Some toolchains may put NULL values
|
||||
* or counts in the initialization table
|
||||
*/
|
||||
|
||||
if ((void*)initializer > (void*)&_stext && (void*)initializer < (void*)&_etext)
|
||||
{
|
||||
cxxdbg("Calling %p\n", initializer);
|
||||
initializer();
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#endif /* CONFIG_HAVE_CXX && CONFIG_HAVE_CXXINITIALIZE */
|
||||
|
||||
@@ -0,0 +1,113 @@
|
||||
/************************************************************************************
|
||||
* configs/stm32f746g-disco/src/stm32_ostest.c
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <string.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <arch/irq.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "up_internal.h"
|
||||
#include "stm32f746g-disco.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
/* Configuration ********************************************************************/
|
||||
|
||||
#undef HAVE_FPU
|
||||
#if defined(CONFIG_ARCH_FPU) && !defined(CONFIG_EXAMPLES_OSTEST_FPUTESTDISABLE) && \
|
||||
defined(CONFIG_EXAMPLES_OSTEST_FPUSIZE) && defined(CONFIG_SCHED_WAITPID) && \
|
||||
!defined(CONFIG_DISABLE_SIGNALS)
|
||||
# define HAVE_FPU 1
|
||||
#endif
|
||||
|
||||
#ifdef HAVE_FPU
|
||||
|
||||
#if CONFIG_EXAMPLES_OSTEST_FPUSIZE != (4*SW_FPU_REGS)
|
||||
# error "CONFIG_EXAMPLES_OSTEST_FPUSIZE has the wrong size"
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Data
|
||||
************************************************************************************/
|
||||
|
||||
static uint32_t g_saveregs[XCPTCONTEXT_REGS];
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
/* Given an array of size CONFIG_EXAMPLES_OSTEST_FPUSIZE, this function will return
|
||||
* the current FPU registers.
|
||||
*/
|
||||
|
||||
void arch_getfpu(FAR uint32_t *fpusave)
|
||||
{
|
||||
irqstate_t flags;
|
||||
|
||||
/* Take a snapshot of the thread context right now */
|
||||
|
||||
flags = irqsave();
|
||||
up_saveusercontext(g_saveregs);
|
||||
|
||||
/* Return only the floating register values */
|
||||
|
||||
memcpy(fpusave, &g_saveregs[REG_S0], (4*SW_FPU_REGS));
|
||||
irqrestore(flags);
|
||||
}
|
||||
|
||||
/* Given two arrays of size CONFIG_EXAMPLES_OSTEST_FPUSIZE this function
|
||||
* will compare them and return true if they are identical.
|
||||
*/
|
||||
|
||||
bool arch_cmpfpu(FAR const uint32_t *fpusave1, FAR const uint32_t *fpusave2)
|
||||
{
|
||||
return memcmp(fpusave1, fpusave2, (4*SW_FPU_REGS)) == 0;
|
||||
}
|
||||
|
||||
#endif /* HAVE_FPU */
|
||||
@@ -0,0 +1,245 @@
|
||||
/************************************************************************************
|
||||
* configs/stm32f746g-disco/src/stm32_spi.c
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Authors: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <errno.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/spi/spi.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "chip.h"
|
||||
#include "stm32.h"
|
||||
#include "stm32f746g-disco.h"
|
||||
|
||||
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || \
|
||||
defined(CONFIG_STM32_SPI3) || defined(CONFIG_STM32_SPI4) || \
|
||||
defined(CONFIG_STM32_SPI5)
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_DEBUG_SPI
|
||||
# define spidbg lldbg
|
||||
# ifdef SPI_VERBOSE
|
||||
# define spivdbg lldbg
|
||||
# else
|
||||
# define spivdbg(x...)
|
||||
# endif
|
||||
#else
|
||||
# undef SPI_VERBOSE
|
||||
# define spidbg(x...)
|
||||
# define spivdbg(x...)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Data
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the stm32f746g-disco board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void weak_function stm32_spiinitialize(void)
|
||||
{
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32_spi1/2/3/4/5select and stm32_spi1/2/3/4/5status
|
||||
*
|
||||
* Description:
|
||||
* The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be
|
||||
* provided by board-specific logic. They are implementations of the select
|
||||
* and status methods of the SPI interface defined by struct spi_ops_s (see
|
||||
* include/nuttx/spi/spi.h). All other methods (including up_spiinitialize())
|
||||
* are provided by common STM32 logic. To use this common SPI logic on your
|
||||
* board:
|
||||
*
|
||||
* 1. Provide logic in stm32_boardinitialize() to configure SPI chip select
|
||||
* pins.
|
||||
* 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions in your
|
||||
* board-specific logic. These functions will perform chip selection and
|
||||
* status operations using GPIOs in the way your board is configured.
|
||||
* 3. Add a calls to up_spiinitialize() in your low level application
|
||||
* initialization logic
|
||||
* 4. The handle returned by up_spiinitialize() may then be used to bind the
|
||||
* SPI driver to higher level logic (e.g., calling
|
||||
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
|
||||
* the SPI MMC/SD driver).
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_STM32_SPI1
|
||||
void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}
|
||||
|
||||
uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI2
|
||||
void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}
|
||||
|
||||
uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI3
|
||||
void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}
|
||||
|
||||
uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI4
|
||||
void stm32_spi4select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}}
|
||||
|
||||
uint8_t stm32_spi4status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI5
|
||||
void stm32_spi5select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
}
|
||||
|
||||
uint8_t stm32_spi5status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32_spi1cmddata
|
||||
*
|
||||
* Description:
|
||||
* Set or clear the SH1101A A0 or SD1306 D/C n bit to select data (true)
|
||||
* or command (false). This function must be provided by platform-specific
|
||||
* logic. This is an implementation of the cmddata method of the SPI
|
||||
* interface defined by struct spi_ops_s (see include/nuttx/spi/spi.h).
|
||||
*
|
||||
* Input Parameters:
|
||||
*
|
||||
* spi - SPI device that controls the bus the device that requires the CMD/
|
||||
* DATA selection.
|
||||
* devid - If there are multiple devices on the bus, this selects which one
|
||||
* to select cmd or data. NOTE: This design restricts, for example,
|
||||
* one one SPI display per SPI bus.
|
||||
* cmd - true: select command; false: select data
|
||||
*
|
||||
* Returned Value:
|
||||
* None
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_SPI_CMDDATA
|
||||
#ifdef CONFIG_STM32_SPI1
|
||||
int stm32_spi1cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
|
||||
{
|
||||
return -ENODEV;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI2
|
||||
int stm32_spi2cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
|
||||
{
|
||||
return -ENODEV;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI3
|
||||
int stm32_spi3cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
|
||||
{
|
||||
return -ENODEV;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI4
|
||||
int stm32_spi4cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
|
||||
{
|
||||
return -ENODEV;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI5
|
||||
int stm32_spi5cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
|
||||
{
|
||||
return -ENODEV;
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* CONFIG_SPI_CMDDATA */
|
||||
#endif /* CONFIG_STM32_SPI1 || ... CONFIG_STM32_SPI5 */
|
||||
@@ -0,0 +1,119 @@
|
||||
/****************************************************************************
|
||||
* configs/stm32f746g-disco/src/stm32_userleds.c
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include "stm32-gpio.h"
|
||||
#include "stm32f746g-disco.h"
|
||||
|
||||
#ifndef CONFIG_ARCH_LEDS
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG
|
||||
* with CONFIG_DEBUG_VERBOSE too)
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_DEBUG_LEDS
|
||||
# define leddbg lldbg
|
||||
# define ledvdbg llvdbg
|
||||
#else
|
||||
# define leddbg(x...)
|
||||
# define ledvdbg(x...)
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32_ledinit
|
||||
*
|
||||
* Description:
|
||||
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board
|
||||
* LEDs. If CONFIG_ARCH_LEDS is not defined, then the stm32_ledinit() is
|
||||
* available to initialize the LED from user application logic.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void stm32_ledinit(void)
|
||||
{
|
||||
stm32_configgpio(GPIO_LD1);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32_setled
|
||||
*
|
||||
* Description:
|
||||
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board
|
||||
* LEDs. If CONFIG_ARCH_LEDS is not defined, then the stm32_setled() is
|
||||
* available to control the LED from user application logic.
|
||||
*
|
||||
*****************************************************************************/
|
||||
|
||||
void stm32_setled(int led, bool ledon)
|
||||
{
|
||||
if (led == BOARD_STATUS_LED)
|
||||
{
|
||||
stm32_gpiowrite(GPIO_LD1, !ledon);
|
||||
}
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32_setled
|
||||
*
|
||||
* Description:
|
||||
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board
|
||||
* LEDs. If CONFIG_ARCH_LEDS is not defined, then the stm32_setleds() is
|
||||
* available to control the LED from user application logic. NOTE: since
|
||||
* there is only a single LED on-board, this is function is not very useful.
|
||||
*
|
||||
*****************************************************************************/
|
||||
|
||||
void stm32_setleds(uint8_t ledset)
|
||||
{
|
||||
stm32_gpiowrite(GPIO_LD1, (ledset & BOARD_STATUS_LED_BIT) != 0);
|
||||
}
|
||||
|
||||
#endif /* !CONFIG_ARCH_LEDS */
|
||||
@@ -0,0 +1,90 @@
|
||||
/****************************************************************************************************
|
||||
* configs/stm32f746g-disco/src/stm32f746g-disco.h
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Authors: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************************************/
|
||||
|
||||
#ifndef __CONFIGS_STM32F746G_DISCO_SRC_STM32F746G_DISCO__H
|
||||
#define __CONFIGS_STM32F746G_DISCO_SRC_STM32F746G_DISCO__H
|
||||
|
||||
/****************************************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
#include <stdint.h>
|
||||
|
||||
/****************************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************************************/
|
||||
/* STM32F736G Discovery GPIOs ***********************************************************************/
|
||||
/* The STM32F746G-DISCO board has numerous LEDs but only one, LD1 located near the reset button, that
|
||||
* can be controlled by software (LD2 is a power indicator, LD3-6 indicate USB status, LD7 is
|
||||
* controlled by the ST-Link).
|
||||
*
|
||||
* LD1 is controlled by PI1 which is also the SPI2_SCK at the Arduino interface. One end of LD1 is
|
||||
* grounded so a high output on PI1 will illuminate the LED.
|
||||
*/
|
||||
|
||||
#define GPIO_LD1 (GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_50MHz | \
|
||||
GPIO_OUTPUT_CLEAR | GPIO_PORTI | GPIO_PIN1)
|
||||
|
||||
/* Pushbutton B1, labelled "User", is connected to GPIO PI11. A high value will be sensed when the
|
||||
* button is depressed. Ntocie the EXTI interrupts are configured.
|
||||
*/
|
||||
|
||||
#define GPIO_BTN_USER (GPIO_INPUT | GPIO_FLOAT | GPIO_EXTI | GPIO_PORTI | GPIO_PIN11)
|
||||
|
||||
/****************************************************************************************************
|
||||
* Public data
|
||||
****************************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/****************************************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************************************/
|
||||
|
||||
/****************************************************************************************************
|
||||
* Name: stm32_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the stm32f746g-disco board.
|
||||
*
|
||||
****************************************************************************************************/
|
||||
|
||||
void weak_function stm32_spiinitialize(void);
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIGS_STM32F746G_DISCO_SRC_STM32F746G_DISCO_H */
|
||||
|
||||
Reference in New Issue
Block a user