arch/sim/src: Rename board_lcd.c to up_lcd.c like other sim code

Rename board_lcd.c to up_lcd.c like other sim code and compile up_spiflash.c and up_qspiflash.c conditionally

arch/sim/src/Makefile

@@ -41,6 +41,14 @@ CPPFLAGS += -I$(ARCH_SRCDIR)/chip -I$(TOPDIR)/sched $(EXTRADEFINES)
 CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(TOPDIR)/sched $(EXTRADEFINES)
 CXXFLAGS += -I$(ARCH_SRCDIR)/chip -I$(TOPDIR)/sched $(EXTRADEFINES)
 
+# Determine which objects are required in the link.The
+# up_head object normally draws in all that is needed, but
+# there are a fews that must be included because they
+# are called only from the host OS-specific logic(HOSTOBJS)
+
+LINKOBJS = up_head$(OBJEXT)
+REQUIREDOBJS = $(LINKOBJS)
+
 ASRCS =
 
 ifeq ($(CONFIG_HOST_X86_64),y)
@@ -60,8 +68,8 @@ AOBJS = $(ASRCS:.S=$(OBJEXT))
 CSRCS  = up_initialize.c up_idle.c up_interruptcontext.c up_initialstate.c
 CSRCS += up_createstack.c up_usestack.c up_releasestack.c up_stackframe.c
 CSRCS += up_unblocktask.c up_blocktask.c up_releasepending.c
-CSRCS += up_reprioritizertr.c up_exit.c up_schedulesigaction.c up_spiflash.c
-CSRCS += up_allocateheap.c up_qspiflash.c
+CSRCS += up_reprioritizertr.c up_exit.c up_schedulesigaction.c
+CSRCS += up_allocateheap.c
 
 VPATH = sim
 DEPPATH = $(patsubst %,--dep-path %,$(subst :, ,$(VPATH)))
@@ -82,6 +90,7 @@ endif
 
 ifeq ($(CONFIG_SMP),y)
   CSRCS += up_smpsignal.c up_smphook.c up_cpuidlestack.c
+  REQUIREDOBJS += up_smpsignal$(OBJEXT) up_smphook$(OBJEXT)
   HOSTCFLAGS += -DCONFIG_SMP=1 -DCONFIG_SMP_NCPUS=$(CONFIG_SMP_NCPUS)
   HOSTSRCS += up_simsmp.c
   STDLIBS += -lpthread
@@ -113,13 +122,15 @@ ifeq ($(CONFIG_SCHED_CRITMONITOR),y)
 endif
 
 ifeq ($(CONFIG_NX_LCDDRIVER),y)
-  CSRCS += board_lcd.c
+  CSRCS += up_lcd.c
 else
   CSRCS += up_framebuffer.c
 ifeq ($(CONFIG_SIM_X11FB),y)
   HOSTSRCS += up_x11framebuffer.c
+  STDLIBS += -lX11 -lXext
 ifeq ($(CONFIG_SIM_TOUCHSCREEN),y)
   CSRCS += up_touchscreen.c
+  REQUIREDOBJS += up_touchscreen$(OBJEXT)
   HOSTSRCS += up_x11eventloop.c
 else
 ifeq ($(CONFIG_SIM_AJOYSTICK),y)
@@ -134,6 +145,14 @@ ifeq ($(CONFIG_SIM_IOEXPANDER),y)
   CSRCS += up_ioexpander.c
 endif
 
+ifeq ($(CONFIG_SIM_SPIFLASH),y)
+  CSRCS += up_spiflash.c
+endif
+
+ifeq ($(CONFIG_SIM_QSPIFLASH),y)
+  CSRCS += up_qspiflash.c
+endif
+
 ifeq ($(CONFIG_FS_FAT),y)
   CSRCS += up_blockdevice.c up_deviceimage.c
   STDLIBS += -lz
@@ -189,12 +208,6 @@ HOSTOBJS = $(HOSTSRCS:.c=$(OBJEXT))
 SRCS = $(ASRCS) $(CSRCS) $(HOSTSRCS)
 OBJS = $(AOBJS) $(COBJS) $(HOSTOBJS)
 
-# Determine which standard libraries will need to be linked in
-
-ifeq ($(CONFIG_SIM_X11FB),y)
-  STDLIBS += -lX11 -lXext
-endif
-
 # Override in Make.defs if linker is not 'ld'
 
 ifeq ($(HOSTOS),Darwin)
@@ -210,24 +223,6 @@ endif
 EXTRA_LIBS ?=
 EXTRA_LIBPATHS ?=
 
-# Determine which objects are required in the link.  The
-# up_head object normally draws in all that is needed, but
-# there are a fews that must be included because they
-# are called only from the host OS-specific logic (HOSTOBJS)
-
-LINKOBJS = up_head$(OBJEXT)
-REQUIREDOBJS = $(LINKOBJS)
-
-ifeq ($(CONFIG_SIM_X11FB),y)
-ifeq ($(CONFIG_SIM_TOUCHSCREEN),y)
-  REQUIREDOBJS += up_touchscreen$(OBJEXT)
-endif
-endif
-
-ifeq ($(CONFIG_SMP),y)
-  REQUIREDOBJS += up_smpsignal$(OBJEXT) up_smphook$(OBJEXT)
-endif
-
 # Determine which NuttX libraries will need to be linked in
 # Most are provided by LINKLIBS on the MAKE command line
 

arch/sim/src/sim/up_lcd.c

@@ -1,7 +1,7 @@
 /****************************************************************************
- * arch/sim/src/sim/board_lcd.c
+ * arch/sim/src/sim/up_lcd.c
  *
- *   Copyright (C) 2011, 2015 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2011, 2015, 2020 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -55,6 +55,7 @@
  ****************************************************************************/
 
 /* Configuration ************************************************************/
+
 /* Check contrast selection */
 
 #if !defined(CONFIG_LCD_MAXCONTRAST)
@@ -123,8 +124,8 @@ struct sim_dev_s
 
 /* LCD Data Transfer Methods */
 
-static int sim_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer,
-                      size_t npixels);
+static int sim_putrun(fb_coord_t row, fb_coord_t col,
+                      FAR const uint8_t *buffer, size_t npixels);
 static int sim_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer,
                       size_t npixels);
 
@@ -204,6 +205,7 @@ static struct sim_dev_s g_lcddev =
     .getplaneinfo = sim_getplaneinfo,
 
     /* LCD RGB Mapping -- Not supported */
+
     /* Cursor Controls -- Not supported */
 
     /* LCD Specific Controls */
@@ -233,8 +235,8 @@ static struct sim_dev_s g_lcddev =
  *
  ****************************************************************************/
 
-static int sim_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer,
-                       size_t npixels)
+static int sim_putrun(fb_coord_t row, fb_coord_t col,
+                      FAR const uint8_t *buffer, size_t npixels)
 {
   lcdinfo("row: %d col: %d npixels: %d\n", row, col, npixels);
   return OK;
@@ -255,7 +257,7 @@ static int sim_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer,
  ****************************************************************************/
 
 static int sim_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer,
-                       size_t npixels)
+                      size_t npixels)
 {
   lcdinfo("row: %d col: %d npixels: %d\n", row, col, npixels);
   return -ENOSYS;
@@ -270,11 +272,13 @@ static int sim_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer,
  ****************************************************************************/
 
 static int sim_getvideoinfo(FAR struct lcd_dev_s *dev,
-                              FAR struct fb_videoinfo_s *vinfo)
+                            FAR struct fb_videoinfo_s *vinfo)
 {
   DEBUGASSERT(dev && vinfo);
   ginfo("fmt: %d xres: %d yres: %d nplanes: %d\n",
-         g_videoinfo.fmt, g_videoinfo.xres, g_videoinfo.yres, g_videoinfo.nplanes);
+         g_videoinfo.fmt, g_videoinfo.xres, g_videoinfo.yres,
+         g_videoinfo.nplanes);
+
   memcpy(vinfo, &g_videoinfo, sizeof(struct fb_videoinfo_s));
   return OK;
 }
@@ -301,7 +305,8 @@ static int sim_getplaneinfo(FAR struct lcd_dev_s *dev, unsigned int planeno,
  *
  * Description:
  *   Get the LCD panel power status (0: full off - CONFIG_LCD_MAXPOWER:
- *   full on). On backlit LCDs, this setting may correspond to the backlight setting.
+ *   full on). On backlit LCDs, this setting may correspond to the backlight
+ *   setting.
  *
  ****************************************************************************/