Added experimental support for G66 (modal macro call) and G67 (end modal macro call).
Made axis letter to axis/motor assignment for axes ABCUVW freely changeable at compile time.
Fix for some G65 arguments being incorrectly validated for normal use (sign, range).
Added repeat support to G65 macro call via the optional L parameter word.
Changed default setting for ABC-axes to rotary.
Changed defaults for jerk settings to 10x acceleration settings.
Disabled jerk for jog, probe and spindle synchronized motion.
Added _active_probe system parameter, returns -1 if no probe inputs available.
Minor bug fix, G5.1 and G33.1 motion commands were not coverted to the correct string equivalent in $G output.
Added ADC/DAC resolution to $pinstate command, changed reported values to integer for ADC/DAC devices and float formatted for PWM devices.
Numeric settings can now be set via G65P1Q<n>S<value>, <n> is the setting number, <value> is the new value.
Changed alarm code for Modbus exceptions (communication errors) from 14 to 19.
Refactored MPG stream code to allow plugins to hook into MPG streams (via event handler).
Added _free memory system parameter, returns value in KBytes or -1 if not available from driver.
Changed basic stream data type from char to uint8_t, added HAL function and core API for releasing/closing UART streams.
Added $PORTS command for listing serial ports, later I will update all drivers to provide the optional information.
Potential fix for polar kinematics not handling axes > 3 correctly, needs testing. Ref. issue #820.
Changed signature of limit check functions, grbl.travel_limits() et. al.
to include a pointer to the work envelope to use.
Updated spindle off handling to check for "at speed" on deceleration when spindle is "at speed" capable.
Added G30 as optional position for tool change.
Moved new tool change mode from PR#673 to $346 - Tool change options.
Moved Modbus RTU code from spindle plugin to the core.
Fixed bug in delayed task handler, might occasionally hang the controller.
Improved handling of stop realtime command (0x19) for faster motion halt without losing position.
Optimized RAM usage. Fixed regression related to losing current coordinate system and tool offset over a stop.
(probe input pullup disable) settings from boolean to bitfield when driver support is available.
Added a few default values for settings in config.h, overridable from the compiler command line.
Added core support for per axis pulloff distance, needs plugin for configuring them.
Added HAL flags for disabling settings for MCU input pins pullup disable, may be set by
drivers/boards that has buffered (optocoupled) inputs that is not possible to change.
Added experimental support of LinuxCNC style subroutines.
Available for gcode run from local filesystem such as on a SD card or in littlefs.
Improved handling of G92 when G92 offset is changed while motion is ongoing. Ref. issue #241.
Fix for issue #521, crash when running G65 macro on ESP32.
"Hardened" stream switching code, likely fix for discussion #456.
Added definitions for up to four additional digital aux I/O ports.
Added real time report of selected spindle in multi spindle configurations. Reported on changes only.
Removed limits override input invert config, for safety reasons it is always active low.
Added HAL entry points for second RGB channel, renamed first from hal.rgb to hal.rgb0.
Added option to setting $22 to force use of limit switches for homing when homing inputs are available in the driver/board combo.
Improved handling of aux I/O pins when claimed for core functions.
Added flag to $9 for disabling laser mode capability for primary PWM spindle. Allows leaving laser mode enabled when a secondary PWM spindle is available and this is used to control a laser.
Added some generic setting definitions for stepper drivers, currently used by the motors plugin.
New/modified core entry points for soft limit checking.
More delta robot tuning, added setting warning in $DELTA output if some settings are inconsistent such as steps/rad, acceleration etc.
Fix for issue #361, HOME status is not reported or reported late when auto reporting is enabled with setting $481.
Some drivers will now only disable hard limits (if enabled) for axes that are homing, this includes max/min limit switches.
HAL entry points and core handlers/events has been added and some have changed signatures in order to better support kinematics implementations.
More work on delta kinematics: new and changed settings, some improved functionality. Still in progress.
NOTE: Delta and polar kinematics is WIP (work in progress) and incomplete.
Feedback is required as I do not have machines at hand for testing.
Ref. issue #341 and #346.
