g2/g2core at 55fc20414db4dfd4cccaaabba0863c841b18c6f7 - g2

Finishing transition to all-hardware timers for fwd-plan/exec, and direct call of load

2017-01-30 15:46:42 -06:00

…

Removed bcr from status report initialization strings (Note: spell check changed bcr to bur in previous commit. Sorry about that)

2017-03-12 13:31:13 -04:00

.gitattributes

…

.gitignore

…

asciitable.txt

…

boards.mk

Corrected CONFIG=PrintrbotPlay to use the correct case for the settings file name.

2017-01-05 15:25:44 -06:00

canonical_machine.cpp

Fixed text mode compile; fixed zero length move ends in cycle regression

2017-03-12 08:57:32 -04:00

canonical_machine.h

Fixed text mode compile; fixed zero length move ends in cycle regression

2017-03-12 08:57:32 -04:00

config_app.cpp

Fixed regression for JSON wrapped code where ’n’ is reported (was failing on read-only)

2017-03-12 09:24:16 -04:00

config_app.h

…

config.cpp

Fixed regression for JSON wrapped code where ’n’ is reported (was failing on read-only)

2017-03-12 09:24:16 -04:00

config.h

Fixed regression for JSON wrapped code where ’n’ is reported (was failing on read-only)

2017-03-12 09:24:16 -04:00

controller.cpp

Work on issue #225 - added a xio_flush_to_command() and call in in certain conditions

2017-01-09 15:12:13 -06:00

controller.h

Improve handling of too-long lines, and up minimum buffers to 512bytes.

2017-02-06 16:57:05 -06:00

coolant.cpp

…

coolant.h

…

cycle_homing.cpp

Fixes and regressions for G28/G30 operating in absolute_distance_mode; Most of the files are the change from ABSOLUTE_MODE to ABSOLUTE_DISTANCE_MODE and similar for INCREMENTAL_MODE.

2017-01-02 10:24:29 -05:00

cycle_jogging.cpp

Fixes and regressions for G28/G30 operating in absolute_distance_mode; Most of the files are the change from ABSOLUTE_MODE to ABSOLUTE_DISTANCE_MODE and similar for INCREMENTAL_MODE.

2017-01-02 10:24:29 -05:00

cycle_probing.cpp

Fixes and regressions for G28/G30 operating in absolute_distance_mode; Most of the files are the change from ABSOLUTE_MODE to ABSOLUTE_DISTANCE_MODE and similar for INCREMENTAL_MODE.

2017-01-02 10:24:29 -05:00

encoder.cpp

…

encoder.h

…

error.h

Improve handling of too-long lines, and up minimum buffers to 512bytes.

2017-02-06 16:57:05 -06:00

g2core_info.h

Updated build number to 100.22

2017-03-12 13:42:23 -04:00

g2core.cppproj

Changed device back to SAM3X8E (Due chip)

2017-03-12 13:20:39 -04:00

g2core.h

Corrected Issue #249 - G2/G3 radius mode resulting in Arc specification error - missing offset(s)

2017-03-12 13:17:15 -04:00

gcode_parser.cpp

Improve handling of too-long lines, and up minimum buffers to 512bytes.

2017-02-06 16:57:05 -06:00

gcode_parser.h

…

gpio.cpp

…

gpio.h

Fixed text mode compile; fixed zero length move ends in cycle regression

2017-03-12 08:57:32 -04:00

help.cpp

…

help.h

…

json_parser.cpp

Working on JSON settings for motors. Installed SU handlers and revised helpers, preprocess float, and “_get_this” primitives. Added proper range checking for some motor parameters. Runs all regression up through motor-po. Fails on motor-pm.

2016-12-31 11:40:33 -05:00

json_parser.h

Copyright date changes

2017-01-08 16:17:19 -05:00

kinematics.cpp

…

kinematics.h

…

LICENSE-gpl-2.0.txt

…

main.cpp

Improve handling of too-long lines, and up minimum buffers to 512bytes.

2017-02-06 16:57:05 -06:00

Makefile

Added DEBUG=3 to enable Semihosting, while DEBUG=2 does not

2017-02-14 15:09:56 -06:00

openocd.cfg.example

…

persistence.cpp

…

persistence.h

…

plan_arc.cpp

Corrected Issue #249 - G2/G3 radius mode resulting in Arc specification error - missing offset(s)

2017-03-12 13:17:15 -04:00

plan_arc.h

…

plan_exec.cpp

Fixed regression for JSON wrapped code where ’n’ is reported (was failing on read-only)

2017-03-12 09:24:16 -04:00

plan_line.cpp

Fixed regression for JSON wrapped code where ’n’ is reported (was failing on read-only)

2017-03-12 09:24:16 -04:00

plan_zoid.cpp

Disabling broken test code in void.

2017-01-09 15:10:57 -06:00

planner.cpp

Improve handling of too-long lines, and up minimum buffers to 512bytes.

2017-02-06 16:57:05 -06:00

planner.h

…

pwm.cpp

Disable alarm when the spindle PWM pin is not defined.

2017-01-05 14:57:06 -06:00

pwm.h

…

report.cpp

Improve handling of too-long lines, and up minimum buffers to 512bytes.

2017-02-06 16:57:05 -06:00

report.h

…

settings.h

…

spindle.cpp

…

spindle.h

…

stepper.cpp

Minor adjustments to exec and stepper to handle a rare stall condition.

2017-02-14 15:10:10 -06:00

stepper.h

Working on JSON settings for motors. Installed SU handlers and revised helpers, preprocess float, and “_get_this” primitives. Added proper range checking for some motor parameters. Runs all regression up through motor-po. Fails on motor-pm.

2016-12-31 11:40:33 -05:00

temperature.cpp

…

temperature.h

…

text_parser.cpp

…

text_parser.h

…

util.cpp

…

util.h

Corrected IN_DEBUGGER occurrences

2017-01-01 08:35:40 -05:00

xio.cpp

Improve handling of too-long lines, and up minimum buffers to 512bytes.

2017-02-06 16:57:05 -06:00

xio.h

Improve handling of too-long lines, and up minimum buffers to 512bytes.

2017-02-06 16:57:05 -06:00