Add e1000e for 5.4, 5.10, 5.14 and 6.1

devices/e1000e/80003es2lan-5.10-ethercat.h

@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_80003ES2LAN_H_
+#define _E1000E_80003ES2LAN_H_
+
+#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL	0x00
+#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL	0x02
+#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL	0x10
+#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE	0x1F
+
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS	0x0008
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS	0x0800
+#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING	0x0010
+
+#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
+#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT	0x0000
+#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE		0x2000
+
+#define E1000_KMRNCTRLSTA_OPMODE_MASK		0x000C
+#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO	0x0004
+
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00	/* Gig Carry Extend Padding */
+#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN	0x00010000
+
+#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN	0x8
+#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN	0x9
+
+/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
+#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE	0x0002	/* 1=Reversal Dis */
+#define GG82563_PSCR_CROSSOVER_MODE_MASK	0x0060
+#define GG82563_PSCR_CROSSOVER_MODE_MDI		0x0000	/* 00=Manual MDI */
+#define GG82563_PSCR_CROSSOVER_MODE_MDIX	0x0020	/* 01=Manual MDIX */
+#define GG82563_PSCR_CROSSOVER_MODE_AUTO	0x0060	/* 11=Auto crossover */
+
+/* PHY Specific Control Register 2 (Page 0, Register 26) */
+#define GG82563_PSCR2_REVERSE_AUTO_NEG		0x2000	/* 1=Reverse Auto-Neg */
+
+/* MAC Specific Control Register (Page 2, Register 21) */
+/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
+#define GG82563_MSCR_TX_CLK_MASK		0x0007
+#define GG82563_MSCR_TX_CLK_10MBPS_2_5		0x0004
+#define GG82563_MSCR_TX_CLK_100MBPS_25		0x0005
+#define GG82563_MSCR_TX_CLK_1000MBPS_25		0x0007
+
+#define GG82563_MSCR_ASSERT_CRS_ON_TX		0x0010	/* 1=Assert */
+
+/* DSP Distance Register (Page 5, Register 26)
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-100M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define GG82563_DSPD_CABLE_LENGTH		0x0007
+
+/* Kumeran Mode Control Register (Page 193, Register 16) */
+#define GG82563_KMCR_PASS_FALSE_CARRIER		0x0800
+
+/* Max number of times Kumeran read/write should be validated */
+#define GG82563_MAX_KMRN_RETRY			0x5
+
+/* Power Management Control Register (Page 193, Register 20) */
+/* 1=Enable SERDES Electrical Idle */
+#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE	0x0001
+
+/* In-Band Control Register (Page 194, Register 18) */
+#define GG82563_ICR_DIS_PADDING			0x0010	/* Disable Padding */
+
+#endif

devices/e1000e/80003es2lan-5.10-orig.h

@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_80003ES2LAN_H_
+#define _E1000E_80003ES2LAN_H_
+
+#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL	0x00
+#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL	0x02
+#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL	0x10
+#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE	0x1F
+
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS	0x0008
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS	0x0800
+#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING	0x0010
+
+#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
+#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT	0x0000
+#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE		0x2000
+
+#define E1000_KMRNCTRLSTA_OPMODE_MASK		0x000C
+#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO	0x0004
+
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00	/* Gig Carry Extend Padding */
+#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN	0x00010000
+
+#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN	0x8
+#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN	0x9
+
+/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
+#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE	0x0002	/* 1=Reversal Dis */
+#define GG82563_PSCR_CROSSOVER_MODE_MASK	0x0060
+#define GG82563_PSCR_CROSSOVER_MODE_MDI		0x0000	/* 00=Manual MDI */
+#define GG82563_PSCR_CROSSOVER_MODE_MDIX	0x0020	/* 01=Manual MDIX */
+#define GG82563_PSCR_CROSSOVER_MODE_AUTO	0x0060	/* 11=Auto crossover */
+
+/* PHY Specific Control Register 2 (Page 0, Register 26) */
+#define GG82563_PSCR2_REVERSE_AUTO_NEG		0x2000	/* 1=Reverse Auto-Neg */
+
+/* MAC Specific Control Register (Page 2, Register 21) */
+/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
+#define GG82563_MSCR_TX_CLK_MASK		0x0007
+#define GG82563_MSCR_TX_CLK_10MBPS_2_5		0x0004
+#define GG82563_MSCR_TX_CLK_100MBPS_25		0x0005
+#define GG82563_MSCR_TX_CLK_1000MBPS_25		0x0007
+
+#define GG82563_MSCR_ASSERT_CRS_ON_TX		0x0010	/* 1=Assert */
+
+/* DSP Distance Register (Page 5, Register 26)
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-100M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define GG82563_DSPD_CABLE_LENGTH		0x0007
+
+/* Kumeran Mode Control Register (Page 193, Register 16) */
+#define GG82563_KMCR_PASS_FALSE_CARRIER		0x0800
+
+/* Max number of times Kumeran read/write should be validated */
+#define GG82563_MAX_KMRN_RETRY			0x5
+
+/* Power Management Control Register (Page 193, Register 20) */
+/* 1=Enable SERDES Electrical Idle */
+#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE	0x0001
+
+/* In-Band Control Register (Page 194, Register 18) */
+#define GG82563_ICR_DIS_PADDING			0x0010	/* Disable Padding */
+
+#endif

devices/e1000e/80003es2lan-5.14-ethercat.h

@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_80003ES2LAN_H_
+#define _E1000E_80003ES2LAN_H_
+
+#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL	0x00
+#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL	0x02
+#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL	0x10
+#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE	0x1F
+
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS	0x0008
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS	0x0800
+#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING	0x0010
+
+#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
+#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT	0x0000
+#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE		0x2000
+
+#define E1000_KMRNCTRLSTA_OPMODE_MASK		0x000C
+#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO	0x0004
+
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00	/* Gig Carry Extend Padding */
+#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN	0x00010000
+
+#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN	0x8
+#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN	0x9
+
+/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
+#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE	0x0002	/* 1=Reversal Dis */
+#define GG82563_PSCR_CROSSOVER_MODE_MASK	0x0060
+#define GG82563_PSCR_CROSSOVER_MODE_MDI		0x0000	/* 00=Manual MDI */
+#define GG82563_PSCR_CROSSOVER_MODE_MDIX	0x0020	/* 01=Manual MDIX */
+#define GG82563_PSCR_CROSSOVER_MODE_AUTO	0x0060	/* 11=Auto crossover */
+
+/* PHY Specific Control Register 2 (Page 0, Register 26) */
+#define GG82563_PSCR2_REVERSE_AUTO_NEG		0x2000	/* 1=Reverse Auto-Neg */
+
+/* MAC Specific Control Register (Page 2, Register 21) */
+/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
+#define GG82563_MSCR_TX_CLK_MASK		0x0007
+#define GG82563_MSCR_TX_CLK_10MBPS_2_5		0x0004
+#define GG82563_MSCR_TX_CLK_100MBPS_25		0x0005
+#define GG82563_MSCR_TX_CLK_1000MBPS_25		0x0007
+
+#define GG82563_MSCR_ASSERT_CRS_ON_TX		0x0010	/* 1=Assert */
+
+/* DSP Distance Register (Page 5, Register 26)
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-100M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define GG82563_DSPD_CABLE_LENGTH		0x0007
+
+/* Kumeran Mode Control Register (Page 193, Register 16) */
+#define GG82563_KMCR_PASS_FALSE_CARRIER		0x0800
+
+/* Max number of times Kumeran read/write should be validated */
+#define GG82563_MAX_KMRN_RETRY			0x5
+
+/* Power Management Control Register (Page 193, Register 20) */
+/* 1=Enable SERDES Electrical Idle */
+#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE	0x0001
+
+/* In-Band Control Register (Page 194, Register 18) */
+#define GG82563_ICR_DIS_PADDING			0x0010	/* Disable Padding */
+
+#endif

devices/e1000e/80003es2lan-5.14-orig.h

@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_80003ES2LAN_H_
+#define _E1000E_80003ES2LAN_H_
+
+#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL	0x00
+#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL	0x02
+#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL	0x10
+#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE	0x1F
+
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS	0x0008
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS	0x0800
+#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING	0x0010
+
+#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
+#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT	0x0000
+#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE		0x2000
+
+#define E1000_KMRNCTRLSTA_OPMODE_MASK		0x000C
+#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO	0x0004
+
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00	/* Gig Carry Extend Padding */
+#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN	0x00010000
+
+#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN	0x8
+#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN	0x9
+
+/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
+#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE	0x0002	/* 1=Reversal Dis */
+#define GG82563_PSCR_CROSSOVER_MODE_MASK	0x0060
+#define GG82563_PSCR_CROSSOVER_MODE_MDI		0x0000	/* 00=Manual MDI */
+#define GG82563_PSCR_CROSSOVER_MODE_MDIX	0x0020	/* 01=Manual MDIX */
+#define GG82563_PSCR_CROSSOVER_MODE_AUTO	0x0060	/* 11=Auto crossover */
+
+/* PHY Specific Control Register 2 (Page 0, Register 26) */
+#define GG82563_PSCR2_REVERSE_AUTO_NEG		0x2000	/* 1=Reverse Auto-Neg */
+
+/* MAC Specific Control Register (Page 2, Register 21) */
+/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
+#define GG82563_MSCR_TX_CLK_MASK		0x0007
+#define GG82563_MSCR_TX_CLK_10MBPS_2_5		0x0004
+#define GG82563_MSCR_TX_CLK_100MBPS_25		0x0005
+#define GG82563_MSCR_TX_CLK_1000MBPS_25		0x0007
+
+#define GG82563_MSCR_ASSERT_CRS_ON_TX		0x0010	/* 1=Assert */
+
+/* DSP Distance Register (Page 5, Register 26)
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-100M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define GG82563_DSPD_CABLE_LENGTH		0x0007
+
+/* Kumeran Mode Control Register (Page 193, Register 16) */
+#define GG82563_KMCR_PASS_FALSE_CARRIER		0x0800
+
+/* Max number of times Kumeran read/write should be validated */
+#define GG82563_MAX_KMRN_RETRY			0x5
+
+/* Power Management Control Register (Page 193, Register 20) */
+/* 1=Enable SERDES Electrical Idle */
+#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE	0x0001
+
+/* In-Band Control Register (Page 194, Register 18) */
+#define GG82563_ICR_DIS_PADDING			0x0010	/* Disable Padding */
+
+#endif

devices/e1000e/80003es2lan-5.15-ethercat.h

@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_80003ES2LAN_H_
+#define _E1000E_80003ES2LAN_H_
+
+#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL	0x00
+#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL	0x02
+#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL	0x10
+#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE	0x1F
+
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS	0x0008
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS	0x0800
+#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING	0x0010
+
+#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
+#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT	0x0000
+#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE		0x2000
+
+#define E1000_KMRNCTRLSTA_OPMODE_MASK		0x000C
+#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO	0x0004
+
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00	/* Gig Carry Extend Padding */
+#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN	0x00010000
+
+#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN	0x8
+#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN	0x9
+
+/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
+#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE	0x0002	/* 1=Reversal Dis */
+#define GG82563_PSCR_CROSSOVER_MODE_MASK	0x0060
+#define GG82563_PSCR_CROSSOVER_MODE_MDI		0x0000	/* 00=Manual MDI */
+#define GG82563_PSCR_CROSSOVER_MODE_MDIX	0x0020	/* 01=Manual MDIX */
+#define GG82563_PSCR_CROSSOVER_MODE_AUTO	0x0060	/* 11=Auto crossover */
+
+/* PHY Specific Control Register 2 (Page 0, Register 26) */
+#define GG82563_PSCR2_REVERSE_AUTO_NEG		0x2000	/* 1=Reverse Auto-Neg */
+
+/* MAC Specific Control Register (Page 2, Register 21) */
+/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
+#define GG82563_MSCR_TX_CLK_MASK		0x0007
+#define GG82563_MSCR_TX_CLK_10MBPS_2_5		0x0004
+#define GG82563_MSCR_TX_CLK_100MBPS_25		0x0005
+#define GG82563_MSCR_TX_CLK_1000MBPS_25		0x0007
+
+#define GG82563_MSCR_ASSERT_CRS_ON_TX		0x0010	/* 1=Assert */
+
+/* DSP Distance Register (Page 5, Register 26)
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-100M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define GG82563_DSPD_CABLE_LENGTH		0x0007
+
+/* Kumeran Mode Control Register (Page 193, Register 16) */
+#define GG82563_KMCR_PASS_FALSE_CARRIER		0x0800
+
+/* Max number of times Kumeran read/write should be validated */
+#define GG82563_MAX_KMRN_RETRY			0x5
+
+/* Power Management Control Register (Page 193, Register 20) */
+/* 1=Enable SERDES Electrical Idle */
+#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE	0x0001
+
+/* In-Band Control Register (Page 194, Register 18) */
+#define GG82563_ICR_DIS_PADDING			0x0010	/* Disable Padding */
+
+#endif

devices/e1000e/80003es2lan-5.15-orig.h

@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_80003ES2LAN_H_
+#define _E1000E_80003ES2LAN_H_
+
+#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL	0x00
+#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL	0x02
+#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL	0x10
+#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE	0x1F
+
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS	0x0008
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS	0x0800
+#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING	0x0010
+
+#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
+#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT	0x0000
+#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE		0x2000
+
+#define E1000_KMRNCTRLSTA_OPMODE_MASK		0x000C
+#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO	0x0004
+
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00	/* Gig Carry Extend Padding */
+#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN	0x00010000
+
+#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN	0x8
+#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN	0x9
+
+/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
+#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE	0x0002	/* 1=Reversal Dis */
+#define GG82563_PSCR_CROSSOVER_MODE_MASK	0x0060
+#define GG82563_PSCR_CROSSOVER_MODE_MDI		0x0000	/* 00=Manual MDI */
+#define GG82563_PSCR_CROSSOVER_MODE_MDIX	0x0020	/* 01=Manual MDIX */
+#define GG82563_PSCR_CROSSOVER_MODE_AUTO	0x0060	/* 11=Auto crossover */
+
+/* PHY Specific Control Register 2 (Page 0, Register 26) */
+#define GG82563_PSCR2_REVERSE_AUTO_NEG		0x2000	/* 1=Reverse Auto-Neg */
+
+/* MAC Specific Control Register (Page 2, Register 21) */
+/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
+#define GG82563_MSCR_TX_CLK_MASK		0x0007
+#define GG82563_MSCR_TX_CLK_10MBPS_2_5		0x0004
+#define GG82563_MSCR_TX_CLK_100MBPS_25		0x0005
+#define GG82563_MSCR_TX_CLK_1000MBPS_25		0x0007
+
+#define GG82563_MSCR_ASSERT_CRS_ON_TX		0x0010	/* 1=Assert */
+
+/* DSP Distance Register (Page 5, Register 26)
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-100M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define GG82563_DSPD_CABLE_LENGTH		0x0007
+
+/* Kumeran Mode Control Register (Page 193, Register 16) */
+#define GG82563_KMCR_PASS_FALSE_CARRIER		0x0800
+
+/* Max number of times Kumeran read/write should be validated */
+#define GG82563_MAX_KMRN_RETRY			0x5
+
+/* Power Management Control Register (Page 193, Register 20) */
+/* 1=Enable SERDES Electrical Idle */
+#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE	0x0001
+
+/* In-Band Control Register (Page 194, Register 18) */
+#define GG82563_ICR_DIS_PADDING			0x0010	/* Disable Padding */
+
+#endif

devices/e1000e/80003es2lan-5.4-ethercat.h

@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_80003ES2LAN_H_
+#define _E1000E_80003ES2LAN_H_
+
+#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL	0x00
+#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL	0x02
+#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL	0x10
+#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE	0x1F
+
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS	0x0008
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS	0x0800
+#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING	0x0010
+
+#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
+#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT	0x0000
+#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE		0x2000
+
+#define E1000_KMRNCTRLSTA_OPMODE_MASK		0x000C
+#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO	0x0004
+
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00	/* Gig Carry Extend Padding */
+#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN	0x00010000
+
+#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN	0x8
+#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN	0x9
+
+/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
+#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE	0x0002	/* 1=Reversal Dis */
+#define GG82563_PSCR_CROSSOVER_MODE_MASK	0x0060
+#define GG82563_PSCR_CROSSOVER_MODE_MDI		0x0000	/* 00=Manual MDI */
+#define GG82563_PSCR_CROSSOVER_MODE_MDIX	0x0020	/* 01=Manual MDIX */
+#define GG82563_PSCR_CROSSOVER_MODE_AUTO	0x0060	/* 11=Auto crossover */
+
+/* PHY Specific Control Register 2 (Page 0, Register 26) */
+#define GG82563_PSCR2_REVERSE_AUTO_NEG		0x2000	/* 1=Reverse Auto-Neg */
+
+/* MAC Specific Control Register (Page 2, Register 21) */
+/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
+#define GG82563_MSCR_TX_CLK_MASK		0x0007
+#define GG82563_MSCR_TX_CLK_10MBPS_2_5		0x0004
+#define GG82563_MSCR_TX_CLK_100MBPS_25		0x0005
+#define GG82563_MSCR_TX_CLK_1000MBPS_25		0x0007
+
+#define GG82563_MSCR_ASSERT_CRS_ON_TX		0x0010	/* 1=Assert */
+
+/* DSP Distance Register (Page 5, Register 26)
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-100M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define GG82563_DSPD_CABLE_LENGTH		0x0007
+
+/* Kumeran Mode Control Register (Page 193, Register 16) */
+#define GG82563_KMCR_PASS_FALSE_CARRIER		0x0800
+
+/* Max number of times Kumeran read/write should be validated */
+#define GG82563_MAX_KMRN_RETRY			0x5
+
+/* Power Management Control Register (Page 193, Register 20) */
+/* 1=Enable SERDES Electrical Idle */
+#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE	0x0001
+
+/* In-Band Control Register (Page 194, Register 18) */
+#define GG82563_ICR_DIS_PADDING			0x0010	/* Disable Padding */
+
+#endif

devices/e1000e/80003es2lan-5.4-orig.h

@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_80003ES2LAN_H_
+#define _E1000E_80003ES2LAN_H_
+
+#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL	0x00
+#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL	0x02
+#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL	0x10
+#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE	0x1F
+
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS	0x0008
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS	0x0800
+#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING	0x0010
+
+#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
+#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT	0x0000
+#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE		0x2000
+
+#define E1000_KMRNCTRLSTA_OPMODE_MASK		0x000C
+#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO	0x0004
+
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00	/* Gig Carry Extend Padding */
+#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN	0x00010000
+
+#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN	0x8
+#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN	0x9
+
+/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
+#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE	0x0002	/* 1=Reversal Dis */
+#define GG82563_PSCR_CROSSOVER_MODE_MASK	0x0060
+#define GG82563_PSCR_CROSSOVER_MODE_MDI		0x0000	/* 00=Manual MDI */
+#define GG82563_PSCR_CROSSOVER_MODE_MDIX	0x0020	/* 01=Manual MDIX */
+#define GG82563_PSCR_CROSSOVER_MODE_AUTO	0x0060	/* 11=Auto crossover */
+
+/* PHY Specific Control Register 2 (Page 0, Register 26) */
+#define GG82563_PSCR2_REVERSE_AUTO_NEG		0x2000	/* 1=Reverse Auto-Neg */
+
+/* MAC Specific Control Register (Page 2, Register 21) */
+/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
+#define GG82563_MSCR_TX_CLK_MASK		0x0007
+#define GG82563_MSCR_TX_CLK_10MBPS_2_5		0x0004
+#define GG82563_MSCR_TX_CLK_100MBPS_25		0x0005
+#define GG82563_MSCR_TX_CLK_1000MBPS_25		0x0007
+
+#define GG82563_MSCR_ASSERT_CRS_ON_TX		0x0010	/* 1=Assert */
+
+/* DSP Distance Register (Page 5, Register 26)
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-100M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define GG82563_DSPD_CABLE_LENGTH		0x0007
+
+/* Kumeran Mode Control Register (Page 193, Register 16) */
+#define GG82563_KMCR_PASS_FALSE_CARRIER		0x0800
+
+/* Max number of times Kumeran read/write should be validated */
+#define GG82563_MAX_KMRN_RETRY			0x5
+
+/* Power Management Control Register (Page 193, Register 20) */
+/* 1=Enable SERDES Electrical Idle */
+#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE	0x0001
+
+/* In-Band Control Register (Page 194, Register 18) */
+#define GG82563_ICR_DIS_PADDING			0x0010	/* Disable Padding */
+
+#endif

devices/e1000e/80003es2lan-6.1-ethercat.h

@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_80003ES2LAN_H_
+#define _E1000E_80003ES2LAN_H_
+
+#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL	0x00
+#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL	0x02
+#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL	0x10
+#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE	0x1F
+
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS	0x0008
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS	0x0800
+#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING	0x0010
+
+#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
+#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT	0x0000
+#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE		0x2000
+
+#define E1000_KMRNCTRLSTA_OPMODE_MASK		0x000C
+#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO	0x0004
+
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00	/* Gig Carry Extend Padding */
+#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN	0x00010000
+
+#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN	0x8
+#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN	0x9
+
+/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
+#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE	0x0002	/* 1=Reversal Dis */
+#define GG82563_PSCR_CROSSOVER_MODE_MASK	0x0060
+#define GG82563_PSCR_CROSSOVER_MODE_MDI		0x0000	/* 00=Manual MDI */
+#define GG82563_PSCR_CROSSOVER_MODE_MDIX	0x0020	/* 01=Manual MDIX */
+#define GG82563_PSCR_CROSSOVER_MODE_AUTO	0x0060	/* 11=Auto crossover */
+
+/* PHY Specific Control Register 2 (Page 0, Register 26) */
+#define GG82563_PSCR2_REVERSE_AUTO_NEG		0x2000	/* 1=Reverse Auto-Neg */
+
+/* MAC Specific Control Register (Page 2, Register 21) */
+/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
+#define GG82563_MSCR_TX_CLK_MASK		0x0007
+#define GG82563_MSCR_TX_CLK_10MBPS_2_5		0x0004
+#define GG82563_MSCR_TX_CLK_100MBPS_25		0x0005
+#define GG82563_MSCR_TX_CLK_1000MBPS_25		0x0007
+
+#define GG82563_MSCR_ASSERT_CRS_ON_TX		0x0010	/* 1=Assert */
+
+/* DSP Distance Register (Page 5, Register 26)
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-100M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define GG82563_DSPD_CABLE_LENGTH		0x0007
+
+/* Kumeran Mode Control Register (Page 193, Register 16) */
+#define GG82563_KMCR_PASS_FALSE_CARRIER		0x0800
+
+/* Max number of times Kumeran read/write should be validated */
+#define GG82563_MAX_KMRN_RETRY			0x5
+
+/* Power Management Control Register (Page 193, Register 20) */
+/* 1=Enable SERDES Electrical Idle */
+#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE	0x0001
+
+/* In-Band Control Register (Page 194, Register 18) */
+#define GG82563_ICR_DIS_PADDING			0x0010	/* Disable Padding */
+
+#endif

devices/e1000e/80003es2lan-6.1-orig.h

@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_80003ES2LAN_H_
+#define _E1000E_80003ES2LAN_H_
+
+#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL	0x00
+#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL	0x02
+#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL	0x10
+#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE	0x1F
+
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS	0x0008
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS	0x0800
+#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING	0x0010
+
+#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
+#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT	0x0000
+#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE		0x2000
+
+#define E1000_KMRNCTRLSTA_OPMODE_MASK		0x000C
+#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO	0x0004
+
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00	/* Gig Carry Extend Padding */
+#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN	0x00010000
+
+#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN	0x8
+#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN	0x9
+
+/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
+#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE	0x0002	/* 1=Reversal Dis */
+#define GG82563_PSCR_CROSSOVER_MODE_MASK	0x0060
+#define GG82563_PSCR_CROSSOVER_MODE_MDI		0x0000	/* 00=Manual MDI */
+#define GG82563_PSCR_CROSSOVER_MODE_MDIX	0x0020	/* 01=Manual MDIX */
+#define GG82563_PSCR_CROSSOVER_MODE_AUTO	0x0060	/* 11=Auto crossover */
+
+/* PHY Specific Control Register 2 (Page 0, Register 26) */
+#define GG82563_PSCR2_REVERSE_AUTO_NEG		0x2000	/* 1=Reverse Auto-Neg */
+
+/* MAC Specific Control Register (Page 2, Register 21) */
+/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
+#define GG82563_MSCR_TX_CLK_MASK		0x0007
+#define GG82563_MSCR_TX_CLK_10MBPS_2_5		0x0004
+#define GG82563_MSCR_TX_CLK_100MBPS_25		0x0005
+#define GG82563_MSCR_TX_CLK_1000MBPS_25		0x0007
+
+#define GG82563_MSCR_ASSERT_CRS_ON_TX		0x0010	/* 1=Assert */
+
+/* DSP Distance Register (Page 5, Register 26)
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-100M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define GG82563_DSPD_CABLE_LENGTH		0x0007
+
+/* Kumeran Mode Control Register (Page 193, Register 16) */
+#define GG82563_KMCR_PASS_FALSE_CARRIER		0x0800
+
+/* Max number of times Kumeran read/write should be validated */
+#define GG82563_MAX_KMRN_RETRY			0x5
+
+/* Power Management Control Register (Page 193, Register 20) */
+/* 1=Enable SERDES Electrical Idle */
+#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE	0x0001
+
+/* In-Band Control Register (Page 194, Register 18) */
+#define GG82563_ICR_DIS_PADDING			0x0010	/* Disable Padding */
+
+#endif

devices/e1000e/82571-5.10-ethercat.h

@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_82571_H_
+#define _E1000E_82571_H_
+
+#define ID_LED_RESERVED_F746	0xF746
+#define ID_LED_DEFAULT_82573	((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_OFF1_ON2  <<  8) | \
+				 (ID_LED_DEF1_DEF2 <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX	0x08000000
+#define AN_RETRY_COUNT		5	/* Autoneg Retry Count value */
+
+/* Intr Throttling - RW */
+#define E1000_EITR_82574(_n)	(0x000E8 + (0x4 * (_n)))
+
+#define E1000_EIAC_82574	0x000DC	/* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAC_MASK_82574	0x01F00000
+
+#define E1000_IVAR_INT_ALLOC_VALID	0x8
+
+/* Manageability Operation Mode mask */
+#define E1000_NVM_INIT_CTRL2_MNGM	0x6000
+
+#define E1000_BASE1000T_STATUS		10
+#define E1000_IDLE_ERROR_COUNT_MASK	0xFF
+#define E1000_RECEIVE_ERROR_COUNTER	21
+#define E1000_RECEIVE_ERROR_MAX		0xFFFF
+bool e1000_check_phy_82574(struct e1000_hw *hw);
+bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
+void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
+
+#endif

devices/e1000e/82571-5.10-orig.h

@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_82571_H_
+#define _E1000E_82571_H_
+
+#define ID_LED_RESERVED_F746	0xF746
+#define ID_LED_DEFAULT_82573	((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_OFF1_ON2  <<  8) | \
+				 (ID_LED_DEF1_DEF2 <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX	0x08000000
+#define AN_RETRY_COUNT		5	/* Autoneg Retry Count value */
+
+/* Intr Throttling - RW */
+#define E1000_EITR_82574(_n)	(0x000E8 + (0x4 * (_n)))
+
+#define E1000_EIAC_82574	0x000DC	/* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAC_MASK_82574	0x01F00000
+
+#define E1000_IVAR_INT_ALLOC_VALID	0x8
+
+/* Manageability Operation Mode mask */
+#define E1000_NVM_INIT_CTRL2_MNGM	0x6000
+
+#define E1000_BASE1000T_STATUS		10
+#define E1000_IDLE_ERROR_COUNT_MASK	0xFF
+#define E1000_RECEIVE_ERROR_COUNTER	21
+#define E1000_RECEIVE_ERROR_MAX		0xFFFF
+bool e1000_check_phy_82574(struct e1000_hw *hw);
+bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
+void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
+
+#endif

devices/e1000e/82571-5.14-ethercat.h

@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_82571_H_
+#define _E1000E_82571_H_
+
+#define ID_LED_RESERVED_F746	0xF746
+#define ID_LED_DEFAULT_82573	((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_OFF1_ON2  <<  8) | \
+				 (ID_LED_DEF1_DEF2 <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX	0x08000000
+#define AN_RETRY_COUNT		5	/* Autoneg Retry Count value */
+
+/* Intr Throttling - RW */
+#define E1000_EITR_82574(_n)	(0x000E8 + (0x4 * (_n)))
+
+#define E1000_EIAC_82574	0x000DC	/* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAC_MASK_82574	0x01F00000
+
+#define E1000_IVAR_INT_ALLOC_VALID	0x8
+
+/* Manageability Operation Mode mask */
+#define E1000_NVM_INIT_CTRL2_MNGM	0x6000
+
+#define E1000_BASE1000T_STATUS		10
+#define E1000_IDLE_ERROR_COUNT_MASK	0xFF
+#define E1000_RECEIVE_ERROR_COUNTER	21
+#define E1000_RECEIVE_ERROR_MAX		0xFFFF
+bool e1000_check_phy_82574(struct e1000_hw *hw);
+bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
+void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
+
+#endif

devices/e1000e/82571-5.14-orig.h

@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_82571_H_
+#define _E1000E_82571_H_
+
+#define ID_LED_RESERVED_F746	0xF746
+#define ID_LED_DEFAULT_82573	((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_OFF1_ON2  <<  8) | \
+				 (ID_LED_DEF1_DEF2 <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX	0x08000000
+#define AN_RETRY_COUNT		5	/* Autoneg Retry Count value */
+
+/* Intr Throttling - RW */
+#define E1000_EITR_82574(_n)	(0x000E8 + (0x4 * (_n)))
+
+#define E1000_EIAC_82574	0x000DC	/* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAC_MASK_82574	0x01F00000
+
+#define E1000_IVAR_INT_ALLOC_VALID	0x8
+
+/* Manageability Operation Mode mask */
+#define E1000_NVM_INIT_CTRL2_MNGM	0x6000
+
+#define E1000_BASE1000T_STATUS		10
+#define E1000_IDLE_ERROR_COUNT_MASK	0xFF
+#define E1000_RECEIVE_ERROR_COUNTER	21
+#define E1000_RECEIVE_ERROR_MAX		0xFFFF
+bool e1000_check_phy_82574(struct e1000_hw *hw);
+bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
+void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
+
+#endif

devices/e1000e/82571-5.15-ethercat.h

@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_82571_H_
+#define _E1000E_82571_H_
+
+#define ID_LED_RESERVED_F746	0xF746
+#define ID_LED_DEFAULT_82573	((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_OFF1_ON2  <<  8) | \
+				 (ID_LED_DEF1_DEF2 <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX	0x08000000
+#define AN_RETRY_COUNT		5	/* Autoneg Retry Count value */
+
+/* Intr Throttling - RW */
+#define E1000_EITR_82574(_n)	(0x000E8 + (0x4 * (_n)))
+
+#define E1000_EIAC_82574	0x000DC	/* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAC_MASK_82574	0x01F00000
+
+#define E1000_IVAR_INT_ALLOC_VALID	0x8
+
+/* Manageability Operation Mode mask */
+#define E1000_NVM_INIT_CTRL2_MNGM	0x6000
+
+#define E1000_BASE1000T_STATUS		10
+#define E1000_IDLE_ERROR_COUNT_MASK	0xFF
+#define E1000_RECEIVE_ERROR_COUNTER	21
+#define E1000_RECEIVE_ERROR_MAX		0xFFFF
+bool e1000_check_phy_82574(struct e1000_hw *hw);
+bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
+void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
+
+#endif

devices/e1000e/82571-5.15-orig.h

@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_82571_H_
+#define _E1000E_82571_H_
+
+#define ID_LED_RESERVED_F746	0xF746
+#define ID_LED_DEFAULT_82573	((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_OFF1_ON2  <<  8) | \
+				 (ID_LED_DEF1_DEF2 <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX	0x08000000
+#define AN_RETRY_COUNT		5	/* Autoneg Retry Count value */
+
+/* Intr Throttling - RW */
+#define E1000_EITR_82574(_n)	(0x000E8 + (0x4 * (_n)))
+
+#define E1000_EIAC_82574	0x000DC	/* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAC_MASK_82574	0x01F00000
+
+#define E1000_IVAR_INT_ALLOC_VALID	0x8
+
+/* Manageability Operation Mode mask */
+#define E1000_NVM_INIT_CTRL2_MNGM	0x6000
+
+#define E1000_BASE1000T_STATUS		10
+#define E1000_IDLE_ERROR_COUNT_MASK	0xFF
+#define E1000_RECEIVE_ERROR_COUNTER	21
+#define E1000_RECEIVE_ERROR_MAX		0xFFFF
+bool e1000_check_phy_82574(struct e1000_hw *hw);
+bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
+void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
+
+#endif

devices/e1000e/82571-5.4-ethercat.h

@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_82571_H_
+#define _E1000E_82571_H_
+
+#define ID_LED_RESERVED_F746	0xF746
+#define ID_LED_DEFAULT_82573	((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_OFF1_ON2  <<  8) | \
+				 (ID_LED_DEF1_DEF2 <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX	0x08000000
+#define AN_RETRY_COUNT		5	/* Autoneg Retry Count value */
+
+/* Intr Throttling - RW */
+#define E1000_EITR_82574(_n)	(0x000E8 + (0x4 * (_n)))
+
+#define E1000_EIAC_82574	0x000DC	/* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAC_MASK_82574	0x01F00000
+
+#define E1000_IVAR_INT_ALLOC_VALID	0x8
+
+/* Manageability Operation Mode mask */
+#define E1000_NVM_INIT_CTRL2_MNGM	0x6000
+
+#define E1000_BASE1000T_STATUS		10
+#define E1000_IDLE_ERROR_COUNT_MASK	0xFF
+#define E1000_RECEIVE_ERROR_COUNTER	21
+#define E1000_RECEIVE_ERROR_MAX		0xFFFF
+bool e1000_check_phy_82574(struct e1000_hw *hw);
+bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
+void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
+
+#endif

devices/e1000e/82571-5.4-orig.h

@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_82571_H_
+#define _E1000E_82571_H_
+
+#define ID_LED_RESERVED_F746	0xF746
+#define ID_LED_DEFAULT_82573	((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_OFF1_ON2  <<  8) | \
+				 (ID_LED_DEF1_DEF2 <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX	0x08000000
+#define AN_RETRY_COUNT		5	/* Autoneg Retry Count value */
+
+/* Intr Throttling - RW */
+#define E1000_EITR_82574(_n)	(0x000E8 + (0x4 * (_n)))
+
+#define E1000_EIAC_82574	0x000DC	/* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAC_MASK_82574	0x01F00000
+
+#define E1000_IVAR_INT_ALLOC_VALID	0x8
+
+/* Manageability Operation Mode mask */
+#define E1000_NVM_INIT_CTRL2_MNGM	0x6000
+
+#define E1000_BASE1000T_STATUS		10
+#define E1000_IDLE_ERROR_COUNT_MASK	0xFF
+#define E1000_RECEIVE_ERROR_COUNTER	21
+#define E1000_RECEIVE_ERROR_MAX		0xFFFF
+bool e1000_check_phy_82574(struct e1000_hw *hw);
+bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
+void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
+
+#endif

devices/e1000e/82571-6.1-ethercat.h

@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_82571_H_
+#define _E1000E_82571_H_
+
+#define ID_LED_RESERVED_F746	0xF746
+#define ID_LED_DEFAULT_82573	((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_OFF1_ON2  <<  8) | \
+				 (ID_LED_DEF1_DEF2 <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX	0x08000000
+#define AN_RETRY_COUNT		5	/* Autoneg Retry Count value */
+
+/* Intr Throttling - RW */
+#define E1000_EITR_82574(_n)	(0x000E8 + (0x4 * (_n)))
+
+#define E1000_EIAC_82574	0x000DC	/* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAC_MASK_82574	0x01F00000
+
+#define E1000_IVAR_INT_ALLOC_VALID	0x8
+
+/* Manageability Operation Mode mask */
+#define E1000_NVM_INIT_CTRL2_MNGM	0x6000
+
+#define E1000_BASE1000T_STATUS		10
+#define E1000_IDLE_ERROR_COUNT_MASK	0xFF
+#define E1000_RECEIVE_ERROR_COUNTER	21
+#define E1000_RECEIVE_ERROR_MAX		0xFFFF
+bool e1000_check_phy_82574(struct e1000_hw *hw);
+bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
+void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
+
+#endif

devices/e1000e/82571-6.1-orig.h

@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_82571_H_
+#define _E1000E_82571_H_
+
+#define ID_LED_RESERVED_F746	0xF746
+#define ID_LED_DEFAULT_82573	((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_OFF1_ON2  <<  8) | \
+				 (ID_LED_DEF1_DEF2 <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX	0x08000000
+#define AN_RETRY_COUNT		5	/* Autoneg Retry Count value */
+
+/* Intr Throttling - RW */
+#define E1000_EITR_82574(_n)	(0x000E8 + (0x4 * (_n)))
+
+#define E1000_EIAC_82574	0x000DC	/* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAC_MASK_82574	0x01F00000
+
+#define E1000_IVAR_INT_ALLOC_VALID	0x8
+
+/* Manageability Operation Mode mask */
+#define E1000_NVM_INIT_CTRL2_MNGM	0x6000
+
+#define E1000_BASE1000T_STATUS		10
+#define E1000_IDLE_ERROR_COUNT_MASK	0xFF
+#define E1000_RECEIVE_ERROR_COUNTER	21
+#define E1000_RECEIVE_ERROR_MAX		0xFFFF
+bool e1000_check_phy_82574(struct e1000_hw *hw);
+bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
+void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
+
+#endif

devices/e1000e/Makefile.am

@@ -55,6 +55,26 @@ EXTRA_DIST = \
 	80003es2lan-4.4-ethercat.h \
 	80003es2lan-4.4-orig.c \
 	80003es2lan-4.4-orig.h \
+	80003es2lan-5.10-ethercat.c \
+	80003es2lan-5.10-ethercat.h \
+	80003es2lan-5.10-orig.c \
+	80003es2lan-5.10-orig.h \
+	80003es2lan-5.14-ethercat.c \
+	80003es2lan-5.14-ethercat.h \
+	80003es2lan-5.14-orig.c \
+	80003es2lan-5.14-orig.h \
+	80003es2lan-5.15-ethercat.c \
+	80003es2lan-5.15-ethercat.h \
+	80003es2lan-5.15-orig.c \
+	80003es2lan-5.15-orig.h \
+	80003es2lan-5.4-ethercat.c \
+	80003es2lan-5.4-ethercat.h \
+	80003es2lan-5.4-orig.c \
+	80003es2lan-5.4-orig.h \
+	80003es2lan-6.1-ethercat.c \
+	80003es2lan-6.1-orig.c \
+	80003es2lan-6.1-ethercat.h \
+	80003es2lan-6.1-orig.h \
 	82571-2.6.32-ethercat.c \
 	82571-2.6.32-orig.c \
 	82571-2.6.33-ethercat.c \
@@ -93,6 +113,26 @@ EXTRA_DIST = \
 	82571-4.4-ethercat.h \
 	82571-4.4-orig.c \
 	82571-4.4-orig.h \
+	82571-5.4-ethercat.c \
+	82571-5.4-ethercat.h \
+	82571-5.4-orig.c \
+	82571-5.4-orig.h \
+	82571-5.10-ethercat.c \
+	82571-5.10-ethercat.h \
+	82571-5.10-orig.c \
+	82571-5.10-orig.h \
+	82571-5.14-ethercat.c \
+	82571-5.14-ethercat.h \
+	82571-5.14-orig.c \
+	82571-5.14-orig.h \
+	82571-5.15-ethercat.c \
+	82571-5.15-ethercat.h \
+	82571-5.15-orig.c \
+	82571-5.15-orig.h \
+	82571-6.1-ethercat.c \
+	82571-6.1-orig.c \
+	82571-6.1-ethercat.h \
+	82571-6.1-orig.h \
 	defines-2.6.32-ethercat.h \
 	defines-2.6.32-orig.h \
 	defines-2.6.33-ethercat.h \
@@ -121,6 +161,16 @@ EXTRA_DIST = \
 	defines-3.8-orig.h \
 	defines-4.4-ethercat.h \
 	defines-4.4-orig.h \
+	defines-5.10-ethercat.h \
+	defines-5.10-orig.h \
+	defines-5.14-ethercat.h \
+	defines-5.14-orig.h \
+	defines-5.15-ethercat.h \
+	defines-5.15-orig.h \
+	defines-5.4-ethercat.h \
+	defines-5.4-orig.h \
+	defines-6.1-ethercat.h \
+	defines-6.1-orig.h \
 	e1000-2.6.32-ethercat.h \
 	e1000-2.6.32-orig.h \
 	e1000-2.6.33-ethercat.h \
@@ -149,6 +199,16 @@ EXTRA_DIST = \
 	e1000-3.8-orig.h \
 	e1000-4.4-ethercat.h \
 	e1000-4.4-orig.h \
+	e1000-5.10-ethercat.h \
+	e1000-5.10-orig.h \
+	e1000-5.14-ethercat.h \
+	e1000-5.14-orig.h \
+	e1000-5.15-ethercat.h \
+	e1000-5.15-orig.h \
+	e1000-5.4-ethercat.h \
+	e1000-5.4-orig.h \
+	e1000-6.1-ethercat.h \
+	e1000-6.1-orig.h \
 	es2lan-2.6.32-ethercat.c \
 	es2lan-2.6.32-orig.c \
 	es2lan-2.6.33-ethercat.c \
@@ -189,6 +249,16 @@ EXTRA_DIST = \
 	ethtool-3.8-orig.c \
 	ethtool-4.4-ethercat.c \
 	ethtool-4.4-orig.c \
+	ethtool-5.10-ethercat.c \
+	ethtool-5.10-orig.c \
+	ethtool-5.14-ethercat.c \
+	ethtool-5.14-orig.c \
+	ethtool-5.15-ethercat.c \
+	ethtool-5.15-orig.c \
+	ethtool-5.4-ethercat.c \
+	ethtool-5.4-orig.c \
+	ethtool-6.1-ethercat.c \
+	ethtool-6.1-orig.c \
 	hw-2.6.32-ethercat.h \
 	hw-2.6.32-orig.h \
 	hw-2.6.33-ethercat.h \
@@ -217,6 +287,16 @@ EXTRA_DIST = \
 	hw-3.8-orig.h \
 	hw-4.4-ethercat.h \
 	hw-4.4-orig.h \
+	hw-5.10-ethercat.h \
+	hw-5.10-orig.h \
+	hw-5.14-ethercat.h \
+	hw-5.14-orig.h \
+	hw-5.4-ethercat.h \
+	hw-5.4-orig.h \
+	hw-6.1-ethercat.h \
+	hw-6.1-orig.h \
+	hw-5.15-ethercat.h \
+	hw-5.15-orig.h \
 	ich8lan-2.6.32-ethercat.c \
 	ich8lan-2.6.32-orig.c \
 	ich8lan-2.6.33-ethercat.c \
@@ -255,6 +335,26 @@ EXTRA_DIST = \
 	ich8lan-4.4-ethercat.h \
 	ich8lan-4.4-orig.c \
 	ich8lan-4.4-orig.h \
+	ich8lan-5.10-ethercat.c \
+	ich8lan-5.10-ethercat.h \
+	ich8lan-5.10-orig.c \
+	ich8lan-5.10-orig.h \
+	ich8lan-5.14-ethercat.c \
+	ich8lan-5.14-ethercat.h \
+	ich8lan-5.14-orig.c \
+	ich8lan-5.14-orig.h \
+	ich8lan-5.15-ethercat.c \
+	ich8lan-5.15-ethercat.h \
+	ich8lan-5.15-orig.c \
+	ich8lan-5.15-orig.h \
+	ich8lan-5.4-ethercat.c \
+	ich8lan-5.4-ethercat.h \
+	ich8lan-5.4-orig.c \
+	ich8lan-5.4-orig.h \
+	ich8lan-6.1-ethercat.c \
+	ich8lan-6.1-orig.c \
+	ich8lan-6.1-ethercat.h \
+	ich8lan-6.1-orig.h \
 	lib-2.6.32-ethercat.c \
 	lib-2.6.32-orig.c \
 	lib-2.6.33-ethercat.c \
@@ -293,6 +393,26 @@ EXTRA_DIST = \
 	mac-4.4-ethercat.h \
 	mac-4.4-orig.c \
 	mac-4.4-orig.h \
+	mac-5.10-ethercat.c \
+	mac-5.10-ethercat.h \
+	mac-5.10-orig.c \
+	mac-5.10-orig.h \
+	mac-5.14-ethercat.c \
+	mac-5.14-ethercat.h \
+	mac-5.14-orig.c \
+	mac-5.14-orig.h \
+	mac-5.4-ethercat.c \
+	mac-5.4-ethercat.h \
+	mac-5.4-orig.c \
+	mac-5.4-orig.h \
+	mac-6.1-ethercat.c \
+	mac-6.1-orig.c \
+	mac-6.1-ethercat.h \
+	mac-6.1-orig.h \
+	mac-5.15-ethercat.c \
+	mac-5.15-ethercat.h \
+	mac-5.15-orig.c \
+	mac-5.15-orig.h \
 	manage-3.10-ethercat.c \
 	manage-3.10-ethercat.h \
 	manage-3.10-orig.c \
@@ -319,6 +439,26 @@ EXTRA_DIST = \
 	manage-4.4-ethercat.h \
 	manage-4.4-orig.c \
 	manage-4.4-orig.h \
+	manage-5.10-ethercat.c \
+	manage-5.10-ethercat.h \
+	manage-5.10-orig.c \
+	manage-5.10-orig.h \
+	manage-5.14-ethercat.c \
+	manage-5.14-ethercat.h \
+	manage-5.14-orig.c \
+	manage-5.14-orig.h \
+	manage-5.15-ethercat.c \
+	manage-5.15-ethercat.h \
+	manage-5.15-orig.c \
+	manage-5.15-orig.h \
+	manage-5.4-ethercat.c \
+	manage-5.4-ethercat.h \
+	manage-5.4-orig.c \
+	manage-5.4-orig.h \
+	manage-6.1-ethercat.c \
+	manage-6.1-orig.c \
+	manage-6.1-ethercat.h \
+	manage-6.1-orig.h \
 	netdev-2.6.32-ethercat.c \
 	netdev-2.6.32-orig.c \
 	netdev-2.6.33-ethercat.c \
@@ -347,6 +487,16 @@ EXTRA_DIST = \
 	netdev-3.8-orig.c \
 	netdev-4.4-ethercat.c \
 	netdev-4.4-orig.c \
+	netdev-5.10-ethercat.c \
+	netdev-5.10-orig.c \
+	netdev-5.14-ethercat.c \
+	netdev-5.14-orig.c \
+	netdev-5.15-ethercat.c \
+	netdev-5.15-orig.c \
+	netdev-5.4-ethercat.c \
+	netdev-5.4-orig.c \
+	netdev-6.1-ethercat.c \
+	netdev-6.1-orig.c \
 	nvm-3.10-ethercat.c \
 	nvm-3.10-ethercat.h \
 	nvm-3.10-orig.c \
@@ -373,6 +523,26 @@ EXTRA_DIST = \
 	nvm-4.4-ethercat.h \
 	nvm-4.4-orig.c \
 	nvm-4.4-orig.h \
+	nvm-5.10-ethercat.c \
+	nvm-5.10-ethercat.h \
+	nvm-5.10-orig.c \
+	nvm-5.10-orig.h \
+	nvm-5.14-ethercat.c \
+	nvm-5.14-ethercat.h \
+	nvm-5.14-orig.c \
+	nvm-5.14-orig.h \
+	nvm-5.15-ethercat.c \
+	nvm-5.15-ethercat.h \
+	nvm-5.15-orig.c \
+	nvm-5.15-orig.h \
+	nvm-5.4-ethercat.c \
+	nvm-5.4-ethercat.h \
+	nvm-5.4-orig.c \
+	nvm-5.4-orig.h \
+	nvm-6.1-ethercat.c \
+	nvm-6.1-orig.c \
+	nvm-6.1-ethercat.h \
+	nvm-6.1-orig.h \
 	param-2.6.32-ethercat.c \
 	param-2.6.32-orig.c \
 	param-2.6.33-ethercat.c \
@@ -401,6 +571,16 @@ EXTRA_DIST = \
 	param-3.8-orig.c \
 	param-4.4-ethercat.c \
 	param-4.4-orig.c \
+	param-5.10-ethercat.c \
+	param-5.10-orig.c \
+	param-5.14-ethercat.c \
+	param-5.14-orig.c \
+	param-5.15-ethercat.c \
+	param-5.15-orig.c \
+	param-5.4-ethercat.c \
+	param-5.4-orig.c \
+	param-6.1-ethercat.c \
+	param-6.1-orig.c \
 	phy-2.6.32-ethercat.c \
 	phy-2.6.32-orig.c \
 	phy-2.6.33-ethercat.c \
@@ -439,6 +619,26 @@ EXTRA_DIST = \
 	phy-4.4-ethercat.h \
 	phy-4.4-orig.c \
 	phy-4.4-orig.h \
+	phy-5.10-ethercat.c \
+	phy-5.10-ethercat.h \
+	phy-5.10-orig.c \
+	phy-5.10-orig.h \
+	phy-5.14-ethercat.c \
+	phy-5.14-ethercat.h \
+	phy-5.14-orig.c \
+	phy-5.14-orig.h \
+	phy-5.15-ethercat.c \
+	phy-5.15-ethercat.h \
+	phy-5.15-orig.c \
+	phy-5.15-orig.h \
+	phy-5.4-ethercat.c \
+	phy-5.4-ethercat.h \
+	phy-5.4-orig.c \
+	phy-5.4-orig.h \
+	phy-6.1-ethercat.c \
+	phy-6.1-orig.c \
+	phy-6.1-ethercat.h \
+	phy-6.1-orig.h \
 	ptp-3.10-ethercat.c \
 	ptp-3.10-orig.c \
 	ptp-3.12-ethercat.c \
@@ -449,6 +649,16 @@ EXTRA_DIST = \
 	ptp-3.16-orig.c \
 	ptp-4.4-ethercat.c \
 	ptp-4.4-orig.c \
+	ptp-5.10-ethercat.c \
+	ptp-5.10-orig.c \
+	ptp-5.14-ethercat.c \
+	ptp-5.14-orig.c \
+	ptp-5.15-ethercat.c \
+	ptp-5.15-orig.c \
+	ptp-5.4-ethercat.c \
+	ptp-5.4-orig.c \
+	ptp-6.1-ethercat.c \
+	ptp-6.1-orig.c \
 	regs-3.10-ethercat.h \
 	regs-3.10-orig.h \
 	regs-3.12-ethercat.h \
@@ -459,6 +669,16 @@ EXTRA_DIST = \
 	regs-3.16-orig.h \
 	regs-4.4-ethercat.h \
 	regs-4.4-orig.h \
+	regs-5.10-ethercat.h \
+	regs-5.10-orig.h \
+	regs-5.14-ethercat.h \
+	regs-5.14-orig.h \
+	regs-5.15-ethercat.h \
+	regs-5.15-orig.h \
+	regs-5.4-ethercat.h \
+	regs-5.4-orig.h \
+	regs-6.1-ethercat.h \
+	regs-6.1-orig.h \
 	update.sh
 
 #------------------------------------------------------------------------------