Introduce "communication failed" log macro (#8939)

esphome/components/ads1115/ads1115.cpp

@@ -17,8 +17,6 @@ void ADS1115Component::setup() {
     return;
   }
 
-  ESP_LOGCONFIG(TAG, "Configuring ADS1115...");
-
   uint16_t config = 0;
   // Clear single-shot bit
   //        0b0xxxxxxxxxxxxxxx
@@ -71,7 +69,7 @@ void ADS1115Component::dump_config() {
   ESP_LOGCONFIG(TAG, "ADS1115:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with ADS1115 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
 }
 float ADS1115Component::request_measurement(ADS1115Multiplexer multiplexer, ADS1115Gain gain,

esphome/components/ags10/ags10.cpp

@@ -65,7 +65,7 @@ void AGS10Component::dump_config() {
     case NONE:
       break;
     case COMMUNICATION_FAILED:
-      ESP_LOGE(TAG, "Communication with AGS10 failed!");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case CRC_CHECK_FAILED:
       ESP_LOGE(TAG, "The crc check failed");

esphome/components/aht10/aht10.cpp

@@ -55,7 +55,7 @@ void AHT10Component::setup() {
       break;
   }
   if (error_code != i2c::ERROR_OK) {
-    ESP_LOGE(TAG, "Communication failed");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->mark_failed();
     return;
   }
@@ -64,7 +64,7 @@ void AHT10Component::setup() {
   while (data & AHT10_STATUS_BUSY) {
     delay(AHT10_DEFAULT_DELAY);
     if (this->read(&data, 1) != i2c::ERROR_OK) {
-      ESP_LOGE(TAG, "Communication failed");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       this->mark_failed();
       return;
     }
@@ -117,7 +117,7 @@ void AHT10Component::read_data_() {
     } else {
       ESP_LOGD(TAG, "Invalid humidity, retrying...");
       if (this->write(AHT10_MEASURE_CMD, sizeof(AHT10_MEASURE_CMD)) != i2c::ERROR_OK) {
-        this->status_set_warning("Communication failed");
+        this->status_set_warning(ESP_LOG_MSG_COMM_FAIL);
       }
       this->restart_read_();
       return;
@@ -148,7 +148,7 @@ void AHT10Component::update() {
     return;
   this->start_time_ = millis();
   if (this->write(AHT10_MEASURE_CMD, sizeof(AHT10_MEASURE_CMD)) != i2c::ERROR_OK) {
-    this->status_set_warning("Communication failed");
+    this->status_set_warning(ESP_LOG_MSG_COMM_FAIL);
     return;
   }
   this->restart_read_();
@@ -160,7 +160,7 @@ void AHT10Component::dump_config() {
   ESP_LOGCONFIG(TAG, "AHT10:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication failed");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);

esphome/components/aic3204/aic3204.cpp

@@ -113,7 +113,7 @@ void AIC3204::dump_config() {
   LOG_I2C_DEVICE(this);
 
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with AIC3204 failed");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
 }
 

esphome/components/am2315c/am2315c.cpp

@@ -188,7 +188,7 @@ void AM2315C::dump_config() {
   ESP_LOGCONFIG(TAG, "AM2315C:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with AM2315C failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);

esphome/components/am2320/am2320.cpp

@@ -47,7 +47,7 @@ void AM2320Component::dump_config() {
   ESP_LOGD(TAG, "AM2320:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with AM2320 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);

esphome/components/apds9306/apds9306.cpp

@@ -97,7 +97,7 @@ void APDS9306::dump_config() {
   if (this->is_failed()) {
     switch (this->error_code_) {
       case COMMUNICATION_FAILED:
-        ESP_LOGE(TAG, "Communication with APDS9306 failed!");
+        ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
         break;
       case WRONG_ID:
         ESP_LOGE(TAG, "APDS9306 has invalid id!");

esphome/components/apds9960/apds9960.cpp

@@ -141,7 +141,7 @@ void APDS9960::dump_config() {
   if (this->is_failed()) {
     switch (this->error_code_) {
       case COMMUNICATION_FAILED:
-        ESP_LOGE(TAG, "Communication with APDS9960 failed!");
+        ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
         break;
       case WRONG_ID:
         ESP_LOGE(TAG, "APDS9960 has invalid id!");

esphome/components/as5600/as5600.cpp

@@ -91,7 +91,7 @@ void AS5600Component::dump_config() {
   LOG_I2C_DEVICE(this);
 
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with AS5600 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     return;
   }
 

esphome/components/as7341/as7341.cpp

@@ -38,7 +38,7 @@ void AS7341Component::dump_config() {
   ESP_LOGCONFIG(TAG, "AS7341:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with AS7341 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   ESP_LOGCONFIG(TAG, "  Gain: %u", get_gain());

esphome/components/atm90e26/atm90e26.cpp

@@ -135,7 +135,7 @@ void ATM90E26Component::dump_config() {
   ESP_LOGCONFIG("", "ATM90E26:");
   LOG_PIN("  CS Pin: ", this->cs_);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with ATM90E26 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   LOG_SENSOR("  ", "Voltage A", this->voltage_sensor_);

esphome/components/atm90e32/atm90e32.cpp

@@ -217,7 +217,7 @@ void ATM90E32Component::dump_config() {
   ESP_LOGCONFIG("", "ATM90E32:");
   LOG_PIN("  CS Pin: ", this->cs_);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with ATM90E32 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   LOG_SENSOR("  ", "Voltage A", this->phase_[PHASEA].voltage_sensor_);

esphome/components/bh1750/bh1750.cpp

@@ -118,7 +118,7 @@ void BH1750Sensor::dump_config() {
   LOG_SENSOR("", "BH1750", this);
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with BH1750 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL_FOR, this->get_name().c_str());
   }
 
   LOG_UPDATE_INTERVAL(this);

esphome/components/bme280_base/bme280_base.cpp

@@ -182,7 +182,7 @@ void BME280Component::dump_config() {
   ESP_LOGCONFIG(TAG, "BME280:");
   switch (this->error_code_) {
     case COMMUNICATION_FAILED:
-      ESP_LOGE(TAG, "Communication with BME280 failed!");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case WRONG_CHIP_ID:
       ESP_LOGE(TAG, "BME280 has wrong chip ID! Is it a BME280?");

esphome/components/bme680/bme680.cpp

@@ -215,7 +215,7 @@ void BME680Component::dump_config() {
   ESP_LOGCONFIG(TAG, "BME680:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with BME680 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   ESP_LOGCONFIG(TAG, "  IIR Filter: %s", iir_filter_to_str(this->iir_filter_));
   LOG_UPDATE_INTERVAL(this);
@@ -307,7 +307,7 @@ void BME680Component::read_data_() {
       this->humidity_sensor_->publish_state(NAN);
     if (this->gas_resistance_sensor_ != nullptr)
       this->gas_resistance_sensor_->publish_state(NAN);
-    ESP_LOGW(TAG, "Communication with BME680 failed!");
+    ESP_LOGW(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning();
     return;
   }

esphome/components/bmi160/bmi160.cpp

@@ -189,7 +189,7 @@ void BMI160Component::dump_config() {
   ESP_LOGCONFIG(TAG, "BMI160:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with BMI160 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   LOG_SENSOR("  ", "Acceleration X", this->accel_x_sensor_);

esphome/components/bmp280_base/bmp280_base.cpp

@@ -132,7 +132,7 @@ void BMP280Component::dump_config() {
   ESP_LOGCONFIG(TAG, "BMP280:");
   switch (this->error_code_) {
     case COMMUNICATION_FAILED:
-      ESP_LOGE(TAG, "Communication with BMP280 failed!");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case WRONG_CHIP_ID:
       ESP_LOGE(TAG, "BMP280 has wrong chip ID! Is it a BME280?");

esphome/components/bmp3xx_base/bmp3xx_base.cpp

@@ -154,7 +154,7 @@ void BMP3XXComponent::dump_config() {
     case NONE:
       break;
     case ERROR_COMMUNICATION_FAILED:
-      ESP_LOGE(TAG, "Communication with BMP3XX failed!");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case ERROR_WRONG_CHIP_ID:
       ESP_LOGE(

esphome/components/ccs811/ccs811.cpp

@@ -163,7 +163,7 @@ void CCS811Component::dump_config() {
   if (this->is_failed()) {
     switch (this->error_code_) {
       case COMMUNICATION_FAILED:
-        ESP_LOGW(TAG, "Communication failed! Is the sensor connected?");
+        ESP_LOGW(TAG, ESP_LOG_MSG_COMM_FAIL);
         break;
       case INVALID_ID:
         ESP_LOGW(TAG, "Sensor reported an invalid ID. Is this a CCS811?");

esphome/components/ch422g/ch422g.cpp

@@ -37,7 +37,7 @@ void CH422GComponent::dump_config() {
   ESP_LOGCONFIG(TAG, "CH422G:");
   LOG_I2C_DEVICE(this)
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with CH422G failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
 }
 

esphome/components/cm1106/cm1106.cpp

@@ -23,7 +23,7 @@ void CM1106Component::setup() {
   ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t response[8] = {0};
   if (!this->cm1106_write_command_(C_M1106_CMD_GET_CO2, sizeof(C_M1106_CMD_GET_CO2), response, sizeof(response))) {
-    ESP_LOGE(TAG, "Communication with CM1106 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->mark_failed();
     return;
   }
@@ -104,7 +104,7 @@ void CM1106Component::dump_config() {
   LOG_SENSOR("  ", "CO2", this->co2_sensor_);
   this->check_uart_settings(9600);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with CM1106 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
 }
 

esphome/components/cse7761/cse7761.cpp

@@ -57,7 +57,7 @@ void CSE7761Component::setup() {
 void CSE7761Component::dump_config() {
   ESP_LOGCONFIG(TAG, "CSE7761:");
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with CSE7761 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   this->check_uart_settings(38400, 1, uart::UART_CONFIG_PARITY_EVEN, 8);

esphome/components/dht12/dht12.cpp

@@ -45,7 +45,7 @@ void DHT12Component::dump_config() {
   ESP_LOGD(TAG, "DHT12:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with DHT12 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);

esphome/components/dps310/dps310.cpp

@@ -91,7 +91,7 @@ void DPS310Component::dump_config() {
   ESP_LOGCONFIG(TAG, "  Revision ID: %u", (this->prod_rev_id_ >> 4) & 0x0F);
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with DPS310 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);

esphome/components/ds1307/ds1307.cpp

@@ -22,7 +22,7 @@ void DS1307Component::dump_config() {
   ESP_LOGCONFIG(TAG, "DS1307:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with DS1307 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   ESP_LOGCONFIG(TAG, "  Timezone: '%s'", this->timezone_.c_str());
 }

esphome/components/ee895/ee895.cpp

@@ -35,7 +35,7 @@ void EE895Component::dump_config() {
   LOG_I2C_DEVICE(this);
   switch (this->error_code_) {
     case COMMUNICATION_FAILED:
-      ESP_LOGE(TAG, "Communication with EE895 failed!");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case CRC_CHECK_FAILED:
       ESP_LOGE(TAG, "The crc check failed");

esphome/components/emc2101/emc2101.cpp

@@ -94,7 +94,7 @@ void Emc2101Component::dump_config() {
   ESP_LOGCONFIG(TAG, "Emc2101 component:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with EMC2101 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   ESP_LOGCONFIG(TAG, "  Mode: %s", this->dac_mode_ ? "DAC" : "PWM");
   if (this->dac_mode_) {
@@ -110,7 +110,7 @@ void Emc2101Component::set_duty_cycle(float value) {
   uint8_t duty_cycle = remap(value, 0.0f, 1.0f, (uint8_t) 0, this->max_output_value_);
   ESP_LOGD(TAG, "Setting duty fan setting to %02X", duty_cycle);
   if (!this->write_byte(EMC2101_REGISTER_FAN_SETTING, duty_cycle)) {
-    ESP_LOGE(TAG, "Communication with EMC2101 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning();
     return;
   }
@@ -119,7 +119,7 @@ void Emc2101Component::set_duty_cycle(float value) {
 float Emc2101Component::get_duty_cycle() {
   uint8_t duty_cycle;
   if (!this->read_byte(EMC2101_REGISTER_FAN_SETTING, &duty_cycle)) {
-    ESP_LOGE(TAG, "Communication with EMC2101 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning();
     return NAN;
   }
@@ -129,7 +129,7 @@ float Emc2101Component::get_duty_cycle() {
 float Emc2101Component::get_internal_temperature() {
   uint8_t temperature;
   if (!this->read_byte(EMC2101_REGISTER_INTERNAL_TEMP, &temperature)) {
-    ESP_LOGE(TAG, "Communication with EMC2101 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning();
     return NAN;
   }
@@ -141,7 +141,7 @@ float Emc2101Component::get_external_temperature() {
   uint8_t lsb, msb;
   if (!this->read_byte(EMC2101_REGISTER_EXTERNAL_TEMP_MSB, &msb) ||
       !this->read_byte(EMC2101_REGISTER_EXTERNAL_TEMP_LSB, &lsb)) {
-    ESP_LOGE(TAG, "Communication with EMC2101 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning();
     return NAN;
   }
@@ -155,7 +155,7 @@ float Emc2101Component::get_speed() {
   // Read **LSB** first to match 'Data Read Interlock' behavior from 6.1 of datasheet
   uint8_t lsb, msb;
   if (!this->read_byte(EMC2101_REGISTER_TACH_LSB, &lsb) || !this->read_byte(EMC2101_REGISTER_TACH_MSB, &msb)) {
-    ESP_LOGE(TAG, "Communication with EMC2101 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning();
     return NAN;
   }

esphome/components/ens160_base/ens160_base.cpp

@@ -279,7 +279,7 @@ void ENS160Component::dump_config() {
 
   switch (this->error_code_) {
     case COMMUNICATION_FAILED:
-      ESP_LOGE(TAG, "Communication failed! Is the sensor connected?");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case READ_FAILED:
       ESP_LOGE(TAG, "Error reading from register");

esphome/components/ens210/ens210.cpp

@@ -163,7 +163,7 @@ void ENS210Component::update() {
 
     // Read T_VAL and H_VAL
     if (!this->read_bytes(ENS210_REGISTER_T_VAL, data, 6)) {
-      ESP_LOGE(TAG, "Communication with ENS210 failed!");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       this->status_set_warning();
       return;
     }

esphome/components/ezo/ezo.cpp

@@ -15,7 +15,7 @@ void EZOSensor::dump_config() {
   LOG_SENSOR("", "EZO", this);
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with EZO circuit failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
 }

esphome/components/ezo_pmp/ezo_pmp.cpp

@@ -41,7 +41,7 @@ static const std::string DOSING_MODE_CONTINUOUS = "Continuous";
 void EzoPMP::dump_config() {
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with EZO-PMP circuit failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
 }

esphome/components/gdk101/gdk101.cpp

@@ -60,7 +60,7 @@ void GDK101Component::dump_config() {
   ESP_LOGCONFIG(TAG, "GDK101:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with GDK101 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
 #ifdef USE_SENSOR
   LOG_SENSOR("  ", "Firmware Version", this->fw_version_sensor_);

esphome/components/grove_gas_mc_v2/grove_gas_mc_v2.cpp

@@ -67,17 +67,17 @@ void GroveGasMultichannelV2Component::dump_config() {
   if (this->is_failed()) {
     switch (this->error_code_) {
       case COMMUNICATION_FAILED:
-        ESP_LOGW(TAG, "Communication failed! Is the sensor connected?");
+        ESP_LOGW(TAG, ESP_LOG_MSG_COMM_FAIL);
         break;
       case APP_INVALID:
-        ESP_LOGW(TAG, "Sensor reported invalid APP installed.");
+        ESP_LOGW(TAG, "Sensor reported invalid APP installed");
         break;
       case APP_START_FAILED:
-        ESP_LOGW(TAG, "Sensor reported APP start failed.");
+        ESP_LOGW(TAG, "Sensor reported APP start failed");
         break;
       case UNKNOWN:
       default:
-        ESP_LOGW(TAG, "Unknown setup error!");
+        ESP_LOGW(TAG, "Unknown setup error");
         break;
     }
   }

esphome/components/hdc1080/hdc1080.cpp

@@ -31,7 +31,7 @@ void HDC1080Component::dump_config() {
   ESP_LOGCONFIG(TAG, "HDC1080:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with HDC1080 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   LOG_SENSOR("  ", "Temperature", this->temperature_);

esphome/components/hm3301/hm3301.cpp

@@ -23,7 +23,7 @@ void HM3301Component::dump_config() {
   ESP_LOGCONFIG(TAG, "HM3301:");
   LOG_I2C_DEVICE(this);
   if (error_code_ == ERROR_COMM) {
-    ESP_LOGE(TAG, "Communication with HM3301 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
 
   LOG_SENSOR("  ", "PM1.0", this->pm_1_0_sensor_);

esphome/components/hmc5883l/hmc5883l.cpp

@@ -73,7 +73,7 @@ void HMC5883LComponent::dump_config() {
   ESP_LOGCONFIG(TAG, "HMC5883L:");
   LOG_I2C_DEVICE(this);
   if (this->error_code_ == COMMUNICATION_FAILED) {
-    ESP_LOGE(TAG, "Communication with HMC5883L failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   } else if (this->error_code_ == ID_REGISTERS) {
     ESP_LOGE(TAG, "The ID registers don't match - Is this really an HMC5883L?");
   }

esphome/components/honeywell_hih_i2c/honeywell_hih.cpp

@@ -17,7 +17,7 @@ void HoneywellHIComponent::read_sensor_data_() {
   uint8_t data[4];
 
   if (this->read(data, sizeof(data)) != i2c::ERROR_OK) {
-    ESP_LOGE(TAG, "Communication with Honeywell HIH failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->mark_failed();
     return;
   }
@@ -37,7 +37,7 @@ void HoneywellHIComponent::read_sensor_data_() {
 
 void HoneywellHIComponent::start_measurement_() {
   if (this->write(REQUEST_CMD, sizeof(REQUEST_CMD)) != i2c::ERROR_OK) {
-    ESP_LOGE(TAG, "Communication with Honeywell HIH failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->mark_failed();
     return;
   }
@@ -49,7 +49,7 @@ bool HoneywellHIComponent::is_measurement_ready_() {
   uint8_t data[1];
 
   if (this->read(data, sizeof(data)) != i2c::ERROR_OK) {
-    ESP_LOGE(TAG, "Communication with Honeywell HIH failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->mark_failed();
     return false;
   }
@@ -84,7 +84,7 @@ void HoneywellHIComponent::dump_config() {
   ESP_LOGD(TAG, "Honeywell HIH:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with Honeywell HIH failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);

esphome/components/honeywellabp2_i2c/honeywellabp2.cpp

@@ -14,7 +14,7 @@ static const char *const TAG = "honeywellabp2";
 
 void HONEYWELLABP2Sensor::read_sensor_data() {
   if (this->read(raw_data_, 7) != i2c::ERROR_OK) {
-    ESP_LOGE(TAG, "Communication with ABP2 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning("couldn't read sensor data");
     return;
   }
@@ -30,7 +30,7 @@ void HONEYWELLABP2Sensor::read_sensor_data() {
 
 void HONEYWELLABP2Sensor::start_measurement() {
   if (this->write(i2c_cmd_, 3) != i2c::ERROR_OK) {
-    ESP_LOGE(TAG, "Communication with ABP2 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning("couldn't start measurement");
     return;
   }
@@ -39,7 +39,7 @@ void HONEYWELLABP2Sensor::start_measurement() {
 
 bool HONEYWELLABP2Sensor::is_measurement_ready() {
   if (this->read(raw_data_, 1) != i2c::ERROR_OK) {
-    ESP_LOGE(TAG, "Communication with ABP2 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->status_set_warning("couldn't check measurement");
     return false;
   }

esphome/components/hte501/hte501.cpp

@@ -25,7 +25,7 @@ void HTE501Component::dump_config() {
   LOG_I2C_DEVICE(this);
   switch (this->error_code_) {
     case COMMUNICATION_FAILED:
-      ESP_LOGE(TAG, "Communication with HTE501 failed!");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case CRC_CHECK_FAILED:
       ESP_LOGE(TAG, "The crc check failed");

esphome/components/htu21d/htu21d.cpp

@@ -32,7 +32,7 @@ void HTU21DComponent::dump_config() {
   ESP_LOGCONFIG(TAG, "HTU21D:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with HTU21D failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   LOG_SENSOR("  ", "Temperature", this->temperature_);

esphome/components/htu31d/htu31d.cpp

@@ -161,7 +161,7 @@ void HTU31DComponent::dump_config() {
   ESP_LOGCONFIG(TAG, "HTU31D:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with HTU31D failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   LOG_SENSOR("  ", "Temperature", this->temperature_);

esphome/components/hyt271/hyt271.cpp

@@ -21,14 +21,14 @@ void HYT271Component::update() {
 
   if (this->write(&raw_data[0], 0) != i2c::ERROR_OK) {
     this->status_set_warning();
-    ESP_LOGE(TAG, "Communication with HYT271 failed! => Ask new values");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     return;
   }
   this->set_timeout("wait_convert", 50, [this]() {
     uint8_t raw_data[4];
     if (this->read(raw_data, 4) != i2c::ERROR_OK) {
       this->status_set_warning();
-      ESP_LOGE(TAG, "Communication with HYT271 failed! => Read values");
+      ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       return;
     }
     uint16_t raw_temperature = ((raw_data[2] << 8) | raw_data[3]) >> 2;

esphome/components/iaqcore/iaqcore.cpp

@@ -26,7 +26,7 @@ struct SensorData {
 
 void IAQCore::setup() {
   if (this->write(nullptr, 0) != i2c::ERROR_OK) {
-    ESP_LOGD(TAG, "Communication failed!");
+    ESP_LOGD(TAG, ESP_LOG_MSG_COMM_FAIL);
     this->mark_failed();
     return;
   }
@@ -89,7 +89,7 @@ void IAQCore::dump_config() {
   LOG_I2C_DEVICE(this);
   LOG_UPDATE_INTERVAL(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with AMS iAQ Core failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_SENSOR("  ", "CO2", this->co2_);
   LOG_SENSOR("  ", "TVOC", this->tvoc_);

esphome/components/ina219/ina219.cpp

@@ -134,7 +134,7 @@ void INA219Component::dump_config() {
   LOG_I2C_DEVICE(this);
 
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with INA219 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     return;
   }
   LOG_UPDATE_INTERVAL(this);

esphome/components/ina226/ina226.cpp

@@ -88,7 +88,7 @@ void INA226Component::dump_config() {
   LOG_I2C_DEVICE(this);
 
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with INA226 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
     return;
   }
   LOG_UPDATE_INTERVAL(this);

esphome/components/ina2xx_base/ina2xx_base.cpp

@@ -203,7 +203,7 @@ void INA2XX::dump_config() {
              this->dev_id_);
   }
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with INA2xx failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
   ESP_LOGCONFIG(TAG, "  Shunt resistance = %f Ohm", this->shunt_resistance_ohm_);

esphome/components/ina3221/ina3221.cpp

@@ -60,7 +60,7 @@ void INA3221Component::dump_config() {
   ESP_LOGCONFIG(TAG, "INA3221:");
   LOG_I2C_DEVICE(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with INA3221 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
 

esphome/components/kamstrup_kmp/kamstrup_kmp.cpp

@@ -10,7 +10,7 @@ static const char *const TAG = "kamstrup_kmp";
 void KamstrupKMPComponent::dump_config() {
   ESP_LOGCONFIG(TAG, "kamstrup_kmp:");
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with Kamstrup meter failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
   LOG_UPDATE_INTERVAL(this);
 

esphome/components/lcd_pcf8574/pcf8574_display.cpp

@@ -26,7 +26,7 @@ void PCF8574LCDDisplay::dump_config() {
   LOG_I2C_DEVICE(this);
   LOG_UPDATE_INTERVAL(this);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with LCD Display failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
 }
 void PCF8574LCDDisplay::write_n_bits(uint8_t value, uint8_t n) {

esphome/components/ltr501/ltr501.cpp

@@ -113,7 +113,7 @@ void LTRAlsPs501Component::dump_config() {
   LOG_SENSOR("  ", "Actual gain", this->actual_gain_sensor_);
 
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with I2C LTR-501/301/558 failed!");
+    ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
   }
 }