Mirrors_Framework/ardupilot
1
0 Fork 0
mirror of https://github.com/ArduPilot/ardupilot.git synced 2026-10-31 22:41:08 +08:00
Code Issues Packages Projects Releases Wiki Activity
22,340 Commits 71 Branches 550 Tags
16cb7078cd235c8dca3e68bc7d2cc4dfd7cb8202
Commit Graph
11412 Commits
Author SHA1 Message Date
Paul Riseborough 16cb7078cd AP_NavEKF2: Fix misleading pre-flight status reporting 2016-05-21 15:13:53 +10:00
Paul Riseborough 38d61f5281 AP_NavEKF2: Update status reporting to handle no-magnetometer startup 2016-05-21 15:13:53 +10:00
Paul Riseborough 9aa3cdfaae AP_NavEKF2: Update GPS yaw re-alignment function 
Updates to support initial alignment without magnetometer
 2016-05-21 15:13:53 +10:00
Paul Riseborough e3c966661b AP_NavEKF2: Remove unnecessary variance reset 
This reset is unnecessary give that a synthetic yaw angle is fused at a low rate to prevent variances from becoming badly conditioned.
 2016-05-21 15:13:53 +10:00
Paul Riseborough 1179c08473 AP_NavEKF2: Handle case where we are in-flight and haven't yet aligned the yaw 
This happens if planes are flown without a compass
 2016-05-21 15:13:53 +10:00
Paul Riseborough 581c1aa0d4 AP_NavEKF2: Adjust attitude variance values used after a heading reset 
Because these errors are in body frame, a spherical error should be used to accommodate different orientations
 2016-05-21 15:13:53 +10:00
Paul Riseborough 5ec8d523f6 AP_NavEKF: remove unwanted co-variance reset 
The co-variance resets required following a velocity and position state reset is now performed in the stte reset function
 2016-05-21 15:13:53 +10:00
Paul Riseborough 66e4d9d6e8 AP_NavEKF2: Reset co-variance values when doing a pos,vel,hgt reset 
Ensures consistent behaviour after resets and reduces attitude disturbances
 2016-05-21 15:13:52 +10:00
Paul Riseborough cf8175a073 AP_NavEKF2: Allow immediate use of GPS in-flight for plane without compass 
Planes operating without a compass must align the yaw to the GPS heading immediately after launch or takeoff and cannot wait for GPS accuracy checks.
 2016-05-21 15:13:52 +10:00
Paul Riseborough 08de4e6d95 AP_NavEKF: Do not perform start-up yaw alignment if no compass 
Yaw cannot be aligned until in-flight when there is sufficient GPS velocity.
 2016-05-21 15:13:52 +10:00
Paul Riseborough d2694fe5dc AP_NavEKF2: Remove duplicate transition into GPS aiding 
This decision is made in one place in setAidingMode()
 2016-05-21 15:13:52 +10:00
Paul Riseborough 7201f7d2fd AP_NavEKF2: fix comment 2016-05-21 15:13:52 +10:00
Paul Riseborough 64a8153b68 AP_NavEKF2: update function name 
The primary purpose of this function is re-alignment
 2016-05-21 15:13:52 +10:00
Paul Riseborough addd213af0 AP_NavEKF2: reduce effect of acceleration on non-GPS mode attitude 2016-05-21 15:13:52 +10:00
Paul Riseborough d33bbf8cc7 AP_NavEKF: remove debug code 2016-05-21 15:13:52 +10:00
Paul Riseborough 54213ad871 DataFlash: Improve reporting of normalised ekf2 magnetometer innovations 
Report the maximum of the x,y,z axis
 2016-05-21 15:13:52 +10:00
Paul Riseborough a3b78e6231 AP_NavEKF2: update tuning defaults 2016-05-21 15:13:51 +10:00
Paul Riseborough 65f63341d7 AP_NavEKF2: Improve numerical error protection in optical flow fusion 
Abort fusion of data if variances will become negative and publish the fault
 2016-05-21 15:13:51 +10:00
Paul Riseborough 42da33593d AP_NavEKF2: fix yaw fusion numerical health reporting 2016-05-21 15:13:51 +10:00
Paul Riseborough 6eb9d43507 AP_NavEKF2: add numerical error checking and isolation to mag decl fusion 2016-05-21 15:13:51 +10:00
Paul Riseborough b325c5faeb AP_NavEKF2: add error checking and isolation to mag heading fusion 2016-05-21 15:13:51 +10:00
Paul Riseborough a0b1dc5325 AP_NavEKF2: add error checking and isolation to 3D amg fusion 2016-05-21 15:13:51 +10:00
Paul Riseborough 51a3df0319 AP_NavEKF2: Add error checking and isolation to pos vel fusion 2016-05-21 15:13:51 +10:00
Paul Riseborough fcee82f9b2 DataFlash: extend ekf fault status reporting coverage 2016-05-21 15:13:51 +10:00
Paul Riseborough 597ec61673 AP_AHRS: extend ekf fault status reporting coverage 2016-05-21 15:13:50 +10:00
Paul Riseborough d59d8cc6e3 AP_NavEKF: extend fusion fault reporting coverage 2016-05-21 15:13:50 +10:00
Paul Riseborough 71b589c89c AP_NavEKF2: extend fusion fault reporting coverage 2016-05-21 15:13:50 +10:00
Paul Riseborough 0982bd0b2b AP_NavEKF2: update parameter documentation 2016-05-21 15:13:50 +10:00
Paul Riseborough 46a2993a0d AP_NavEKF: use intuitive units for imu bias process noise parameters 2016-05-21 15:13:50 +10:00
Paul Riseborough 8c374fd679 AP_NavEKF2: correct comments 2016-05-21 15:13:50 +10:00
Paul Riseborough 6be9eaa524 AP_NavEKF2: use receiver estimated accuracy 
Adjust the GPS observation noise based on receiver accuracy output if available.
 2016-05-21 15:13:50 +10:00
Paul Riseborough dddc213836 AP_NavEKF2: Open up tuning limits 
Done to assist tuning assessments
 2016-05-21 15:13:50 +10:00
Paul Riseborough cf05e110fc AP_NavEKF2: fix scaling error in use of IMU noise parameters 
Also remove process noise from state transition matrix where it was mistakenly left in after the derivation
 2016-05-21 15:13:50 +10:00
Randy Mackay 2bafc36ded AC_WPNav: support rangefinder for terrain following 2016-05-21 10:36:53 +09:00
Randy Mackay 4829dbb55d AC_Fence: rename check_destination_within_fence and accept distances in meters 2016-05-21 09:56:12 +09:00
Saloni Jain ff843448aa AC_Fence: Added a new function to check whether the guided waypoint is within the fence 2016-05-21 09:56:12 +09:00
Gustavo Jose de Sousa 9a100afede AP_HAL_Linux: Thread: add doc about rounding function 2016-05-20 16:31:15 -03:00
Lucas De Marchi 359417d544 AP_HAL_Linux: Thread: make sure pointer is aligned 
Implementation of alloca() is very much architecture and compiler
dependent. Avoid the case in which it could return a non-aligned
pointer, which would mean Thread::_poison_stack() would do the wrong
thing.
 2016-05-20 16:31:15 -03:00
Lucas De Marchi 7e49d0c53f AP_HAL_Linux: Thread: fix alignment warning 
../../libraries/AP_HAL_Linux/Thread.cpp: In member function ‘void Linux::Thread::_poison_stack()’:
../../libraries/AP_HAL_Linux/Thread.cpp:87:31: warning: cast from ‘uint8_t* {aka unsigned char*}’ to ‘uint32_t* {aka unsigned int*}’ increases required alignment of target type [-Wcast-align]
         for (p = (uint32_t *) end; p > curr; p--) {
                               ^
../../libraries/AP_HAL_Linux/Thread.cpp:93:31: warning: cast from ‘uint8_t* {aka unsigned char*}’ to ‘uint32_t* {aka unsigned int*}’ increases required alignment of target type [-Wcast-align]
         for (p = (uint32_t *) end; p < curr; p++) {
                               ^
../../libraries/AP_HAL_Linux/Thread.cpp:98:39: warning: cast from ‘uint8_t* {aka unsigned char*}’ to ‘uint32_t* {aka unsigned int*}’ increases required alignment of target type [-Wcast-align]
     _stack_debug.start = (uint32_t *) begin;
                                       ^
../../libraries/AP_HAL_Linux/Thread.cpp:99:37: warning: cast from ‘uint8_t* {aka unsigned char*}’ to ‘uint32_t* {aka unsigned int*}’ increases required alignment of target type [-Wcast-align]
     _stack_debug.end = (uint32_t *) end;
                                     ^
 2016-05-20 16:31:15 -03:00
Lucas De Marchi 18af4da690 AP_HAL_Linux: Thread: fix warning regarding shadow member 
../../libraries/AP_HAL_Linux/Thread.cpp: In member function ‘void Linux::Thread::_poison_stack()’:
../../libraries/AP_HAL_Linux/Thread.cpp:63:20: warning: declaration of ‘start’ shadows a member of 'this' [-Wshadow]
     uint8_t *end, *start, *curr;
                    ^
 2016-05-20 16:31:15 -03:00
Tom Pittenger 684ac12dd6 AC_WPNav: fix compile when using AP_TERRAIN_AVAILABLE 0 2016-05-20 12:29:19 -07:00
Tom Pittenger f085666032 AP_Common: fix compile when using AP_TERRAIN_AVAILABLE 0 2016-05-20 12:28:46 -07:00
Leandro Pereira 3555e439a4 AP_HAL_Linux: Simplify I2C initialization in HAL_Linux_Class 2016-05-20 10:12:17 -03:00
Aaron Wang Shi cb9cd9008a AP_HAL_Linux: fix bhat spi device driver build error 2016-05-20 10:09:50 -03:00
Lucas De Marchi 035937ea7e AP_GPS: add some safety checks to _parse_decimal_100() 2016-05-20 10:06:45 -03:00
Lucas De Marchi 994b2fc966 AP_GPS: add unit test for _parse_decimal_100() 2016-05-20 10:06:44 -03:00
Lucas De Marchi fc6dd97e61 AP_GPS: make _parse_decimal_100() a static function 
This allows to easily write tests for it as opposed to having to
construct the entire object.
 2016-05-20 10:06:44 -03:00
Bert Regelink 7379d120e1 AP_GPS: fix _parse_decimal_100() with negative numbers 
_parse_decimal_100() did not parse the fractional part for negative
numbers. Furthermore, use the third decimal (when present) for proper
rounding.
 2016-05-20 10:06:44 -03:00
AndersonRayner aaa8709194 AP_RPM: Added an example script 2016-05-19 19:01:03 -03:00
Vinicius Juvinski ed2718a183 AP_Notify: Buzzer: change pin 11(P8_31) to pin 12(P8_32) 
Avoid boot conflict during power on.
 2016-05-19 17:22:27 -03:00