mirror of
https://github.com/PX4/PX4-Autopilot.git
synced 2026-02-06 18:23:30 +08:00
27 lines
1.7 KiB
Plaintext
27 lines
1.7 KiB
Plaintext
# Action request for the vehicle's main state
|
|
#
|
|
# Message represents actions requested by a PX4 internal component towards the main state machine such as a request to arm or switch mode.
|
|
# It allows mapping triggers from various external interfaces like RC channels or MAVLink to cause an action.
|
|
# Request are published by `manual_control` and subscribed by the `commander` and `vtol_att_control` modules.
|
|
|
|
uint64 timestamp # [us] Time since system start
|
|
|
|
uint8 action # [@enum ACTION] Requested action
|
|
uint8 ACTION_DISARM = 0 # Disarm vehicle
|
|
uint8 ACTION_ARM = 1 # Arm vehicle
|
|
uint8 ACTION_TOGGLE_ARMING = 2 # Toggle arming
|
|
uint8 ACTION_UNKILL = 3 # Revert a kill action
|
|
uint8 ACTION_KILL = 4 # Kill vehicle (instantly stop the motors)
|
|
uint8 ACTION_SWITCH_MODE = 5 # Switch mode. The target mode is set in the `mode` field.
|
|
uint8 ACTION_VTOL_TRANSITION_TO_MULTICOPTER = 6 # Transition to hover flight
|
|
uint8 ACTION_VTOL_TRANSITION_TO_FIXEDWING = 7 # Transition to fast forward flight
|
|
uint8 ACTION_TERMINATION = 8 # Irreversably output failsafe values on all outputs, trigger parachute
|
|
|
|
uint8 source # [@enum SOURCE] Request trigger type, such as a switch, button or gesture
|
|
uint8 SOURCE_STICK_GESTURE = 0 # Triggered by holding the sticks in a certain position
|
|
uint8 SOURCE_RC_SWITCH = 1 # Triggered by an RC switch moving into a certain position
|
|
uint8 SOURCE_RC_BUTTON = 2 # Triggered by a momentary button on the RC being pressed or held
|
|
uint8 SOURCE_RC_MODE_SLOT = 3 # Mode change through the RC mode selection mechanism
|
|
|
|
uint8 mode # Requested mode. Only applies when `action` is `ACTION_SWITCH_MODE`. Values for this field are defined by the `vehicle_status_s::NAVIGATION_STATE_*` enumeration.
|