Files
PX4-Autopilot/docs/en/sensor/teraranger.md
Hamish Willee 2fd131d3cf Link fixes 4 (#26633)
* Airframe - replace Babyshark with QAV250

* Link fixes
2026-03-04 09:45:50 +11:00

1.7 KiB
Raw Blame History

TeraRanger Rangefinders (Discontinued)

::: warning TeraRanger Evo sensors were discontinued by Terabee in May 2024. Limited stock may still be available from third-party resellers such as Tribotix. :::

TeraRanger provide a number of lightweight distance measurement sensor based on infrared Time-of-Flight (ToF) technology. They are typically faster and have greater range than sonar, and smaller and lighter than laser-based systems.

PX4 supports:

::: info PX4 also supports TeraRanger One (I2C adapter required). This has been discontinued. :::

Where to Buy

  • TBD

Pinouts

Wiring

All TeraRanger sensors must be connected via the I2C bus.

Software Configuration

The sensors are enabled using the parameter SENS_EN_TRANGER (you can set the type of sensor or that PX4 should auto-detect the type).

::: info If using auto-detect for Evo sensors the minimum and maximum values for the range are set to the lowest and highest possible readings across the Evo family (currently 0.5 - 60 m). In order to use the correct max/min values the appropriate model of the Evo sensor should be set in the parameter (instead of using autodetect). :::

:::tip The driver for this rangefinder is usually present in firmware. If missing, you would also need to add the driver (distance_sensor/teraranger) to the board configuration. :::

Further Information